Fig. 5: Presence of residual stabiliser in a multi-material inkjet 3D printed encapsulated conductive silver pattern. | Communications Materials

Fig. 5: Presence of residual stabiliser in a multi-material inkjet 3D printed encapsulated conductive silver pattern.

From: Residual polymer stabiliser causes anisotropic electrical conductivity during inkjet printing of metal nanoparticles

Fig. 5

a Schematic showing the layer structure of the device. b Photographs showing that encapsulation enables the use of the device under water. ToF-SIMS depth profile results at the c top and e bottom interface. The dielectric material is TPGDA and represented by C3H3O+. PVP is represented by C6H10NO+ d TEM micrographs of a cross-section.

Back to article page