Abstract
Semiconductor quantum dots are excellent candidates for ultrafast coherent manipulation of qubits by laser pulses on picosecond timescales or even faster. In inhomogeneous ensembles a macroscopic optical polarization decays rapidly due to dephasing, which, however, is reversible in photon echoes carrying complete information about the coherent ensemble dynamics. Control of the echo emission time is mandatory for applications. Here, we propose a concept to reach this goal. In a twopulse photon echo sequence, we apply an additional resonant control pulse with multiple of 2π area. Depending on its arrival time, the control slows down dephasing or rephasing of the exciton ensemble during its action. We demonstrate for selfassembled (In,Ga)As quantum dots that the photon echo emission time can be retarded or advanced by up to 5 ps relative to its nominal appearance time without control. This versatile protocol may be used to obtain significantly longer temporal shifts for suitably tailored control pulses.
Introduction
Coherent nonlinear optics involving quantum emitters is an excellent playground for investigating advanced quantum mechanical phenomena^{1}. Ensembles of quantum emitters in solids typically possess significant inhomogeneous broadening of the optical transition frequency. This might be considered as a drawback, as it leads to rapid dephasing of a macroscopic polarization in the medium. However, the ensemble may also be used to establish a unique collective phenomena in the coherent evolution of the system such as superradiance or entanglement^{2,3}. Moreover, ultrafast optical control of quantum emitters in solidstate systems is possible on picosecond timescales, which is attractive for applications in quantum technologies^{4}, where the use of an ensemble is advantageous for establishing efficient coupling with light^{5,6}.
Semiconductor quantum dots (QDs) are outstanding quantum emitters^{7,8}, showing a discrete energy level spectrum due to the threedimensional carrier confinement. The transition to the elementary optical excitation of an exciton (electronhole pair) can often be well approximated by a twolevel system (TLS), for which the strong Coulomb attraction in QDs leads to a high spectral selectivity for resonant excitation. QD excitons possess a large oscillator strength, well defined optical selection rules, and long coherence times, which are limited by the radiative decay time of about 1 ns at low temperatures^{9}. This allows one to perform their ultrafast initialization and coherent control with ps or even subpsoptical pulses^{10,11}. Rabi oscillations^{12,13,14,15,16} and adiabatic rapid passage^{17,18} were successfully demonstrated on QD excitons. Ramsey fringes and their control by timedependent electric fields were implemented on single QD level, demonstrating the possibility of optical phase manipulation^{19,20}. In contrast, phase control in an ensemble of emitters has remained difficult because of inhomogeneous broadening of the optical transitions due to fluctuations of QD size, composition, etc. In particular, it was shown that rapid dephasing has significant impact even during excitation with pspulses, leading to a complex temporal evolution of the coherent optical response^{21,22}.
The inhomogeneous broadening of optical transitions in a TLS ensemble leads to decay of the macroscopic polarization. However, often the optical coherence on the microscopic level is preserved and the dephasing is reversible. Deterministic delayed emission of light by the QD ensemble can be achieved by the implementation of photon echo (PE) protocols^{9,21}. In the simplest case of a primary twopulse PE, the second excitation pulse is used to invert the phase distribution of the TLS ensemble, which leads to a subsequent rephasing: the appearance of macroscopic polarization and the emission of the PE. Therefore, modification of the TLS phase evolution during dephasing or rephasing must influence the temporal PE profile^{23}. In nuclear magnetic resonance or electron spin resonance, a large variety of protocols involving complex pulse sequences has been established to shape the dephasing and observe multiple spin echoes on a long timescale^{24}. The most prominent examples are dynamic decoupling (Carr–Purcell and Carr–Purcell–Meiboom–Gill sequences)^{25,26} and spin locking^{27}. The latter requires elaborate control of the phase in the pulse sequence, which is hard to achieve for optical pulses. Nevertheless, inhibition of dephasing has been also demonstrated for atoms through locking of the macroscopic polarization and the PE shape^{28,29,30}. Deterministic control of PE timing has been recently demonstrated in a rareearth nanophotonic crystal using symmetrically detuned ac Stark pulses, which result in compression of the atomic frequency comb and subsequent delay of the emitted PE pulse^{31}. However, optical control of the PE timing using resonant optical fields has not been considered yet. Moreover, the short duration of the PE pulses in semiconductor QDs enables us to extend the timing control into the picosecond range which is significantly faster as compared to previous studies.
In this work, we propose a simple approach to this problem and perform a proof of principle demonstration of resonant optical control of the PE timing in selfassembled semiconductor QDs, leveraging concepts of multiwave mixing in TLS^{32}. First, we show that exciton dephasing and rephasing in a QD ensemble can be efficiently slowed down by resonant excitation with a 2π optical control pulse on picosecond timescales. Moreover, we show that the freezing takes place even when the ensemble has lost its macroscopic polarization at the time of control pulse action. Second, we demonstrate that the application of the control pulse can be used to significantly alter the time of PE emission. Interestingly, this procedure is very robust as there is no need to adjust precisely the optical phase and exact timing of the control pulse. Therefore, our results pave the way to a versatile PE control in ensembles of TLS.
Results
PE timing via dephasing freezing
Here we describe the main principles underlying the control of PE emission time. Let us consider a TLS ensemble with optically allowed transition between the ground state \({\left1\right\rangle }_{i}\) with energy E_{1,i} and the excited state \({\left2\right\rangle }_{i}\) with energy E_{2,i}. In a semiconductor QD, these states correspond to the crystal ground state and the lowest energy exciton. The energy of this transition is ℏω_{i} = E_{2,i} − E_{1,i} for the ith QD, which varies due to QD fluctuations. For simplicity, we assume a Gaussian distribution with central frequency ω_{0} and inhomogeneous broadening Δ_{0}. We note that in spite of the strong inhomogeneous broadening of the ensemble, i.e., Δ_{0} ≫ 1/T_{2}, where T_{2} is the exciton coherence time in a single QD, the resonance frequency ω_{0} is well defined, because Δ_{0} ≪ ω_{0}.
In the following, we concentrate on the primary twopulse PE, resulting from resonant excitation of the ensemble with a sequence of two short optical pulses with areas π/2 and π, respectively. The pulse area is defined as
where \({\Omega }_{{\rm{R}}}(t)={d}_{12}{\mathcal{E}}(t)/\hslash\) is the Rabi frequency with \({\mathcal{E}}(t)\) being the timedependent electric field amplitude of an optical pulse and d_{12} is the dipole matrix element of the optical transition. In addition, a control pulse with area 2πn (n is an integer) is applied, to freeze the dephasing. The central photon energy ℏω is the same for all pulses and corresponds to resonant excitation, i.e., ω = ω_{0}. First, let us consider a simplified picture, where the excitation pulses are very short (δpulses), whereas the control pulse has a rectangular shape with duration t_{C}. In this case, the ensemble dephasing during excitation by the first and second pulses can be neglected, simplifying the descriptive analysis. In addition, we neglect primarily any decoherence during PE formation and use the Bloch sphere presentation to describe the coherent dynamics of the TLS ensemble in the rotating frame.
The quantum mechanical state of each QD is given by the coherent superposition of \({\left1\right\rangle }_{i}\) and \({\left2\right\rangle }_{i}\), and described by the Bloch vector \({\bf{U}}=(u,v,w)=(\sin \theta \sin \phi ,\sin \theta \cos \phi ,\cos \theta )\) as shown in Fig. 1a–c. The colatitude θ gives the population difference between the excited and ground state, and the longitude ϕ determines the phase of the quantum state (see Fig. 1a). Initially, all QDs are in the ground state (θ = 0). At time t = 0, the π/2pulse excitation leads to rotation of the Bloch vectors around the uaxis to the equator (θ = π/2). Then dephasing of the TLS kicks in. Excitons with frequency ω_{0} remain at the same point of the Bloch sphere (ϕ = 0), whereas for other excitons with detuning Δ = ω_{i} − ω_{0}, the phase evolves linearly with time ϕ = tΔ as shown in Fig. 1d. The Bloch vectors of the excited QDs get evenly distributed along the equator (see Fig. 1a). The second πpulse, exciting the ensemble at t = τ_{12}, inverts the phase distribution and leads subsequently to refocusing of the TLS at t = 2τ_{12}^{23,33}, when all QD Bloch vectors coincide. This is manifested in the recovery of the macroscopic polarization that was induced by the first pulse, and the emission of a PE pulse with duration of about \({\Delta }_{0}^{1}\). In this evolution, two prominent time intervals between excitation and PE emission exist: time range 1, 0 < t < τ_{12} for dephasing; time range 2, τ_{12} < t < 2τ_{12} for rephasing.
Now we apply the control pulse to the dephased system, i.e., when the macroscopic polarization has decayed and all Bloch vectors are evenly distributed along the equator of the sphere. The area of the control pulse is Ω_{R}t_{C} = 2πn. In the resonant case (Δ = 0), the Bloch vector directed along the vaxis is rotated around the uaxis, transfering the excitons to the same point on the Bloch sphere after time t_{C}. For detuned excitons, the rotation occurs with the generalized Rabi frequency \(\tilde{\Omega }=\sqrt{{\Omega }_{{\rm{R}}}^{2}+{\Delta }^{2}}\) around the vector Ω = (Ω_{R}, 0, Δ), which can be visualized using the equation of motion of the Bloch vector
The analysis shows that there are deviations between the final and starting points of the rotation, as represented by the short red lines in Fig. 1b. For Ω_{R} ≫ Δ, we obtain \(\tilde{\Omega }\approx {\Omega }_{{\rm{R}}}[1+{(\Delta /{\Omega }_{{\rm{R}}})}^{2}/2]\) (further details are provided in the Supplementary Note 1). Moreover, as Ω deviates only slightly from the uaxis, the increment mostly contributes to θ rather than to ϕ. The deviation of the phase after several Rabi rotations from the initial point is significantly smaller compared to free evolution of the system without control pulse after the same time t_{C} (see Fig. 1b, c for comparison). Thus, the control pulse leads to an inhibition of dephasing after its action. It is noteworthy that there are no strict requirements regarding the duration t_{C} of the control pulse, the freezing will take place also for t_{C}Δ > 1. Here we assumed only that Ω_{R} ≫ Δ and (Δ/Ω_{R})t_{C}Δ ≪ 1 (see Supplementary Note 1).
The impact of the control pulse on the PE formation is manifested in a temporal shift of the PE peak. If the control pulse is applied in time range 1 (control prepulse) or 2 (control postpulse), it effectively slows down the dephasing or rephasing process, respectively. The phase evolutions for these two scenarios are shown in Fig. 1e, f. A consequence of the partially suppressed dephasing in time range 1 is a shorter rephasing period after the arrival of the second pulse. As a result the PE is advanced by t_{C} (blue peak in Fig. 1e). Vice versa, if the rephasing was frozen for the time t_{C}, it will delay the PE appearance after the second pulse by this time (see Fig. 1f).
Interestingly, the effect is independent of the exact timing of the control pulse within the two time ranges and the optical phase of the control with respect to the first and second pulse is also not important. Thus, this method can be used as convenient and efficient tool to control the timing of two or even multiplepulse PEs. In addition, the area of the control pulse can be used to modulate the amplitude of PE. In the following sections, we present experimental data demonstrating that the concept can be easily implemented with selfassembled (In,Ga)As QDs. The measurements are analyzed using the optical Bloch equations (OBEs) from which good agreement between the experiment is obtained.
Coherent optical response in QDs
The experiments were performed on a single layer of (In,Ga)As QDs placed at the electric field antinode of a planar λmicrocavity formed by distributed Bragg reflectors as shown in Fig. 2a (for details see “Methods” and ref. ^{34}). The quality factor of the microcavity is about 200, as evaluated from the photoluminescence spectrum in the inset of Fig. 2b. The photon energy of the optical pulses was tuned into resonance with the photonic mode. The use of the microcavity has several advantages^{16,21}: first, it allows us to achieve Rabi rotations using moderate excitation intensities. Second, it enhances the intensity of the emitted PEs. Simultaneously, the spectral width of the cavity mode (ℏΔ_{B} ≈ 7.4 meV) is significantly larger than the spectral width of the laser pulses (ℏδω ~ 0.6 meV) and therefore does not influence the coherent dynamics of the optically addressed QD ensemble. On the other hand, we have to consider the QD ensemble as strongly inhomogeneous, as the total spectral width of the ensemble Δ_{0} is even larger than Δ_{B}.
The coherent optical response after the two excitation pulse sequence was measured using transient fourwave mixing (FWM) in reflection geometry at the temperature of 2 K (see Fig. 2a and “Methods”). All pulses are emitted from the same modelocked laser source and have a duration of about 2.5 ps. Heterodyne detection allows us to measure the temporal profile of the electric field amplitude of the FWM signal from the PE^{21}. A typical signal is shown in Fig. 2c for a delay time between the first and second pulses of τ_{12} = 80 ps. As expected, the PE peak occurs at the time t = 2τ_{12}. The measured signal is well described by a Gaussian with fullwidth at halfmaximum (FWHM) of about 6.5 ps, which corresponds to a PE duration of 4 ps FWHM (see details in Supplementary Note 2 for the evaluation of the PE pulse duration). The latter is determined by the spectral width of optically addressed excitons which is proportional to the spectral width of the laser. The PE duration can be even shorter if fs pulses are used for excitation^{9}. The PE peak dependence on τ_{12} is shown in Fig. 2b. The PE amplitude decreases with increasing delay time between the first and second pulse, and is well described by \({P}_{{\rm{PE}}}\propto \exp (2{\tau }_{12}/{T}_{2})\). Interestingly, an increase of the first pulse’s area Θ_{1} from π/2 to 5π/2 leaves T_{2} unchanged at ≈0.7 ns, which is approximately twice as long as the exciton lifetime T_{1} = 360 ps. Thus, we conclude that excitationinduced dephasing and further manybody interactions are weak in our system, which is essential for robust Rabi oscillations^{22}.
The ensemble comprises neutral and charged QDs, which are occupied with resident electrons. To address only one type of TLS and avoid additional inhomogeneities of the Rabi frequency due to potential differences in the dipole matrix elements for trions (electronhole pair excitation in a negatively charged QD) and excitons, we used a polarization configuration that results in a PE signal from charged QDs only^{35}. This is ensured for a horizontally Hpolarized first pulse and a Vvertically polarized second pulse with the resulting PE signal being Hpolarized.
Impact of control pulse on PE timing
First, we demonstrate PE timing by a control pulse when the primary echo has maximum amplitude, which is achieved for the first and second pulse areas of Θ_{1} ≲ π/2 and Θ_{2} ≈ π. As will be shown below, the corresponding pulse energy densities are I_{1} = 4 nJ cm^{−2} and I_{2} = 23 nJ cm^{−2}. In this case the PE peak appears at t = 2τ_{12} (see Fig. 2c). The application of a 2π control pulse has strong impact on the PE peak timing. According to our expectations, we observe an advancement or retardation of the PE by ~5 ps for application of a control pre or postpulse, respectively. It is noteworthy that the temporal shift is about two times larger than the duration of the control pulse. This is not surprising because we use a nonrectangular Gaussian pulse and proper calculations of the coherent optical response are required here. We emphasize that the temporal shift is independent of the exact moment of control pulse application within the time range 1 (prepulse in Fig. 2d) or 2 (postpulse in Fig. 2e, f). In addition, we note that the duration of the detected PE signal remains constant with a FWHM of about 6.5 ps. Its amplitude is reduced by about 50%, which is attributed mainly to the damping of Rabi oscillations as will be discussed at the end of this section.
Due to the strong inhomogeneous broadening of the optical transitions, the PE temporal profile depends sensitively on the intensity of the first excitation pulse. In particular, previous studies on (In,Ga)As QDs demonstrated that the PE signal acquires a nonGaussian shape and experiences a significant advancement for pulse areas larger than π due to inhomogeneityinduced dephasing of the excitons during the optical excitation^{21}. Therefore, the area of the first pulse should be adjusted accurately to not too high values.
Figure 3 shows twodimensional plots of the PE transients (horizontal axis) vs. pulse area \({\Theta }_{1}\propto \sqrt{{I}_{1}}\) (vertical axis). The top (Fig. 3a–c) and bottom (Fig. 3d–f) rows show experimental data and numerical simulations, respectively. The simulations show ∣P_{Signal}∣, obtained from numerical solution of the extended OBEs^{22,23}. These equations take into account the inhomogeneous broadening and the finite spot size of the laser pulses (for details, see “Methods”) and allow us to reproduce the measured coherent transients well. The results are presented for τ_{12} = 80 ps and Θ_{2} ≈ π in the presence of a prepulse (Fig. 3a) or a postpulse (Fig. 3c) with area Θ_{C} ≈ 2π and delays relative to the first and second pulse of 33 and 27 ps, respectively. The reference data without control pulse is shown in Fig. 3b. Clearly, oscillations of the PE amplitude are observed with increasing Θ_{1} that have to be attributed to Rabi oscillations^{33}.
In the simplest case of a TLS ensemble excited by a sequence of δpulses, the PE peak is centered at t = 2τ_{12} and its amplitude scales like \({P}_{{\rm{PE}}}\propto \sin ({\Theta }_{1})\). In our experimental setting, the FWM signal at t = 2τ_{12} is proportional to ∣P_{PE}∣. It follows from Fig. 3b that we observe up to two full Rabi flops (2π rotations). In our measurement, each maximum as function of Θ_{1} is attributed to Θ_{1} = mπ/2, where m is an odd integer. In addition to the oscillatory behavior, we observe significant changes in the timing of the PE when Θ_{1} is varied. This is well reproduced by our numerical simulation (see Fig. 3e) and indicates that dephasing of the ensemble during excitation with the first and second pulses should be taken into account^{21}.
The main result of Fig. 3 becomes obvious when comparing the plots with and without control pulse. Control pulse application shifts the PE signals along the time axis. Even though the PE transient profile may have a complex temporal shape, the impact of pre or postpulse with area 2π advances or retards the intensitydependent transient, without strong changes in its shape. Thus, PE timing by the control pulse is demonstrated as confirmed for arbitrary intensities of the first pulse. Moreover, in our experiment where excitation and control pulses have the same duration the inhibition of dephasing for high intensity pulses may add up. For example, it follows from Fig. 3a that for Θ_{1} ≈ 3π/2 and Θ_{C} ≈ 2π, the PE appears 8 ps earlier compared to the PE observed for Θ_{1} ≈ π/2 and in the absence of this control pulse. This advancement noticeably exceeds the PE pulse duration of 4 ps.
Finally, we discuss the influence of the area of the control pulse Θ_{C}. Figure 4 shows the dependence of the PE temporal profile on the control pulse amplitude \(\sqrt{{I}_{{\rm{C}}}}\) for control prepulse (a) and postpulse (b) application, whereas (c) and (d) show the corresponding simulations, where ∣P_{Signal}∣ was calculated (see “Methods” for details). The time delays for pre or postpulses correspond to 33 and 27 ps relative to the first or second pulse, respectively. Here we also observe oscillatory behavior due to Rabi flopping. PE timing shifts occur in both cases but the induced delays are opposite for pre or postpulse, so that the contour plots are mirrored with respect to t = 2τ_{12}. We concentrate on the PE timing in case of a prepulse. For weak pulse energies \(\sqrt{{I}_{{\rm{C}}}}<1.5\times 1{0}^{4}{{\rm{J}}}^{1/2}{{\rm{cm}}}^{1}\) (Θ_{C} < π), we observe quenching of the PE amplitude, while its maximum slightly shifts towards longer times. For a prepulse amplitude of \(\sqrt{{I}_{{\rm{C}}}}\approx 1.5\times 1{0}^{4}{{\rm{J}}}^{1/2}\,{{\rm{cm}}}^{1}\) (Θ_{C} ≈ π), the PE almost disappears. Further increase of I_{C} leads to the appearance of a strong PE signal with its maximum at \(\sqrt{{I}_{{\rm{C}}}}\approx 3\times 1{0}^{4}\,{{\rm{J}}}^{1/2}\,{{\rm{cm}}}^{1}\) (Θ_{C} ≈ 2π), which is temporally advanced by 5 ps. The next maximum around \(\sqrt{{I}_{{\rm{C}}}}=6\times 1{0}^{4}\,{{\rm{J}}}^{1/2}\,{{\rm{cm}}}^{1}\) (Θ_{C} ≈ 4π) is sufficiently weaker compared to the first one and is only slightly further advanced. Thus, we conclude that the application of a control prepulse shows two different regimes depending on its pulse/intensity area. For Θ_{C} < π, the maxima shift slightly to longer times, whereas the application of a more intense control pulse Θ_{C} > π leads to an advanced PE and, in fact, a much larger temporal displacement (see Fig. 4e).
Discussion
The results of the simulations are in excellent agreement with the experimental data in Figs. 3 and 4, considering the temporal shifts of the PE, as well as their magnitude for pulse areas Θ_{1} and Θ_{C} up to 2π. The model accounts for the spatially inhomogeneous distribution of the laser intensity on the sample which leads to a spread of Rabi frequencies within the laser spot, which consequently leads to a decay of the Rabi oscillations^{22}. For pulse areas larger than 2π, the damping of the Rabi oscillations is not reproduced quantitatively by our simulations, predominantly due to the simplified description of the laser intensity distributions. It is established that an intensitydependent damping of the Rabi oscillations can also arise from the coupling to acoustic phonons as demonstrated for spatially homogeneous systems^{36,37}. However, in our case, the spatial inhomogeneity is likely the dominant damping process. A more detailed discussion of intensitydependent damping is provided in the Supplementary Note 3.
Figure 4 shows that substantial PE shifts in time occur for control pulse areas up to Θ_{C} = 2π. For larger areas, the PE shifts saturate, in agreement with our simulations, which confirm that there exists a maximum possible PE shift for a given pulse duration t_{C}. Nevertheless, it is possible to vary the temporal shift of the PE by setting the proper t_{C}. The exact dependence of the PEs on intensity and duration of the control pulse is determined by the shape of its envelope. For Gaussian pulses, the magnitude of retardation or advancement is linearly proportional to t_{C} if the driving optical field is strong enough. However, if we increase t_{C} while keeping the pulse area constant, the optical field amplitude \({{\mathcal{E}}}_{{\rm{C}}}\) becomes weaker and at some point the PE intensity decreases, whereas the PE pulse broadens and its shape is deformed, indicating that the freezing mechanism is not effective any more for the entire ensemble (for details see also Supplementary Note 4).
Apart from increasing the pulse area or the pulse duration of the control pulse, it is also possible to control the temporal shift by means of multiple pulses. Such an approach can be even more convenient from the application point of view. Our model predicts that the respective time shifts sum up, which is consistent with the interpretation of successive freezing events. Figure 5 shows the temporal profiles of the PE for different double pulse sequences with amplitudes \({{\mathcal{E}}}_{{\rm{C,1}}}\) and \({{\mathcal{E}}}_{{\rm{C,2}}}\), simulated with the OBEs. Two prepulses lead to a temporal advancement of the PE, twice as large as compared to one prepulse (see Fig. 5a) and two postpulses to the retardation twice as large as compared to one postpulse (see Fig. 5b). The resulting temporal shift is independent on the exact time of excitation with the control pulses. However, action of pre and postpulses induces opposite temporal shifts. Therefore, as shown in Fig. 5c, cooperative action of such pulses leads to cancellation of the PE shift.
It should be noted that also intense offresonant control pulses can be used to influence the dephasing of excitons in QD ensembles. In this case, the ac Stark effect may lead to modulations of the PE amplitude as recently demonstrated in rareearth solids^{38,39,40}. This behavior has also been confirmed within our model where we find that the temporal shift of the PE decreases in the presence of a detuning, for which also the PE amplitude rapidly reduces with increasing intensity of the control pulse.
Thus, we conclude that the timing of PEs by optical freezing of exciton dephasing and rephasing in QDs is robust with respect to the exact time of arrival of the control pulse. The PE shifts for a large variety of excitation conditions, e.g., it occurs for arbitrary intensities of the first and the second pulses, and it is also independent of the optical phase of the control pulse. Our study shows that the temporal shift can be controlled (i) bidirectionally in a deterministic way (pre or postcontrol pulse); (ii) the magnitude of the advancement or retardation is determined by the duration of the intensive control pulse; and (iii) the echo does not experience strong variations of its temporal shape under appropriate conditions, which correspond to a strong driving optical field. The accuracy of timing for the temporal shift is determined by the precision of control pulse parameters (pulse duration, temporal shape, and intensity). The latter can be adjusted to obtain shifts with an accuracy well below the duration of the echo pulse. Therefore, optical freezing can be applied for optical control of PE timing on ultrafast timescales, e.g., for timing corrections in memory protocols^{5,6,31}. Furthermore, addressing the spin degrees of freedom in systems with more than two energy levels (V and Λtype arrangements) can be used to split the temporal profile of PEs in two counterpolarized pulses, making it possible to perform wavefunction interferometry of electronic excitations in solidstate systems. This opens a vast novel possibilities for investigations of collective phenomena in exciton ensembles.
Methods
Experiment
The experiment was performed on a single layer of (In,Ga)As QDs, surrounded by an AlGaAs λmicrocavity grown by molecularbeam epitaxy. The growth procedure is decribed in ref. ^{34}. The QD density is 1.8 × 10^{9} cm^{−2}. There is a Si δlayer with donor density 8 × 10^{9} cm^{−2} located in the barrier 10 nm below the QD layer. The Bragg mirrors consist of alternating GaAs and AlAs layers with thicknesses of 68 and 82 nm, respectively. The top and bottom mirror contain 5 and 18 of such pairs. The same sample was previously studied in ref. ^{21}. The sample has a gradient axis along which the thickness of the cavity and of the layers in the Bragg structure slightly change. Thereby, the energy of the photonic resonator mode varies in the spectral range of 1.343–1.362 eV (910–923 nm) with a gradient of about 3.5 nm/mm. This spectral range corresponds approximately to the energy range of the photoluminescence from the QD ensemble. Therefore, the investigated structure shows strong photoluminescence with the maximum centered at the photon energy of the photonic mode and a FWHM of 7.4 meV, resulting in the quality factor of about 200 (see Fig. 2b).
The sample was kept in a bath cryostat and cooled down to 2 K. As source of the excitation and control pulses, we use a single modelocked Ti : sapphire laser, which generates pulses with tunable central wavelength at a repetition rate of 75.75 MHz and duration of 2.5 ps, estimated from autocorrelation measurements (see Supplementary Note 2). The spectral width of the laser pulses (FWHM = 0.6 meV) is below the spectral width of the cavity mode and therefore the resonator impact can be considered mostly as enhancement of the electric field amplitude^{16,21}. Degenerate transient FWM was measured in reflection geometry (see Fig. 2a). The first and second pulses hit the sample with wave vectors k_{1} and k_{2} at incidence angles of 3^{∘} and 4^{∘}, respectively, and with the delay time τ_{12} between them. In addition, we applied a control pulse, which hits the sample with the wave vector k_{2}, delayed relative to the first or second pulse. The delay times between the pulses are controlled by mechanical translation stages and their polarizations are set by Glan prisms combined with halfwave plates.
The laser beams are focused at the sample into spots with diameters of about 400 μm for the first pulse and about 250 μm for the second and control pulses. To record PEs from the charged QDs only, the first pulse had a horizontal (H) polarization, whereas the second and control pulses were vertically (V) polarized. The Hcomponent of the signal was detected along the 2k_{2}–k_{1} direction. The FWM signal was overlapped with the reference pulse and the resulting interference signal was heterodyne detected at the balanced photoreceiver^{41}. The delay line of the reference pulse t_{ref} was scanned relative to the first pulse to obtain the temporal profile of the electric field amplitude of the FWM signal. As result, the modulus of the cross correlation of the electrical field amplitude was detected (see Eq. (9) in the next section). The area of the second pulse was fixed at π, whereas the areas of the exciting and control pulses were varied.
Theoretical modeling
The photoexcited TLS are theoretically described by the OBEs^{23,42} Their solution provides the dynamics of the microscopic polarization \(p=\left\langle 2\right\hat{\rho }\left1\right\rangle\) and the occupation of the upper energy level \(n=\left\langle 2\right\hat{\rho }\left2\right\rangle\) where \(\hat{\rho }\) is the density matrix of the system^{42}. Taking into account the inhomogeneous broadening of the TLS ensemble and the finite spot size of the laser pulses leads to a set of extended OBEs^{22}
where T_{2} and T_{1} are the coherence time and lifetime of the exciton, respectively. The index i describes the inhomogeneous broadening of the resonance as a superposition of many TLS with different transition frequencies ω_{i} = (E_{2,i} − E_{1,i})/ℏ. The fraction of TLS with transition frequency ω_{i} is described by the weight function G(ω_{i}), which is taken to be a Gaussian with FWHM ℏΔ_{0} = 7.5 meV. \({\mathcal{E}}({\bf{r}},t)={{\mathcal{E}}}_{1}({\bf{r}},t)+{{\mathcal{E}}}_{2}({\bf{r}},t)+{{\mathcal{E}}}_{{\rm{C}}}({\bf{r}},t)\) is the total electric field amplitude including the first, second, and control pulses. The temporal dependences of the pulse amplitudes are modeled as Gaussians with FWHM of the intensity profile τ_{d} = 2.5 ps, whereas their magnitudes are determined by the pulse areas (Eq. (1)). The finite spot size of the laser pulses is included by considering their spatial profiles as function of r = (x, y). These profiles are taken as
where \(r=\sqrt{{x}^{2}+{y}^{2}}\) is the distance from the laser spot center at (0, 0) and σ_{R} is the spot width. For simplicity, we assume that all spots have the same center and the same diameter. To obtain the macroscopic polarization P(r, t) that is created in the sample, the sum of all microscopic polarizations p_{i}(r, t), weighted with G(ω_{i}) and multiplied with d_{12} has to be calculated according to
The macroscopic polarization P(r, t) is the source of the electric field that is emitted from the spot at position r. The calculations can be performed with P(r, t), as its absolute value is proportional to the absolute value of the emitted electric field. The detector does not resolve each coordinate separately, but rather the spatial integral of all signals is measured, which requires spatial averaging. However, before the electric field that is induced by the macroscopic polarization P(r, t) is detected, it interferes with the reference pulse \({{\mathcal{E}}}_{{\rm{Ref}}}({\bf{r}},t)\); this interference is described by a temporal convolution of the macroscopic polarization and the electric field of the reference pulse that needs to be performed for each coordinate separately. The reference pulse is assumed to have the same spatial profile as \({\mathcal{E}}({\bf{r}},t)\), which results in a factor of \(\exp ({r}^{2}/{\sigma }_{{\rm{R}}}^{2})\) for each P(r, t). We note that the convolution of two functions is a linear operation, which means that we can perform the spatial averaging first and calculate the temporal convolution in the end. The total signal that results from the spatial averaging then reads
Due to the rotational symmetry of all spatial profiles, it is advantageous to use a polar coordinate system. With this, the extended OBEs only need to be solved for all distances r instead of all coordinates. Discretizing the distance r with the index s, and therefore changing the integration to a summation, leads to the following expression
where Δr is the stepwidth for the discretization of r.
The final signal P_{Signal}(t) is taken by calculating the temporal convolution of P_{average}(t) and the temporal dependence of the reference pulse \({{\mathcal{E}}}_{{\rm{Ref}}}(t)\)
where \({{\mathcal{E}}}_{{\rm{Ref}}}(t)={{\mathcal{E}}}_{1}(t)/\max \{{{\mathcal{E}}}_{1}(t)\}\) is given by the normalized first pulse and the convolution of two functions f and g is defined as
For the implementation of the inhomogeneous ensemble, 1500 TLS are considered with frequencies from −15 meV to 15 meV and a resolution of 0.02 meV. For the spatial profile of the laser pulses, the value of σ_{R} is not needed in the calculation. Rather, the radii can be written in units of σ_{R}. Radii from r = 0.05σ_{R} to r = 3.5σ_{R} are considered with a stepwidth of Δr = 0.05σ_{R}. The coherence time and lifetime of the exciton are chosen according to the experimental values of T_{2} = 710 ps and T_{1} = 360 ps. The extended OBEs are integrated as function of time with the fourthorder Runge–Kutta method, using a temporal stepwidth of 0.01 ps. For scanning the pulse area, a stepwidth of ΔΘ = 0.05 was used.
Data availability
The data that support the plots within this paper and other findings of this study are available from the corresponding author upon reasonable request.
Code availability
The code used for simulations in this study is available from the corresponding author upon reasonable request.
References
Scully, M. O. & Zubairy, M. S. Quantum Optics (Cambridge Univ. Press, 1997).
Rainò, G. et al. Superfluorescence from lead halide perovskite quantum dot superlattices. Nature 563, 671 (2018).
Zarkeshian, P. et al. Entanglement between more than two hundred macroscopic atomic ensembles in a solid. Nat. Commun. 8, 906 (2017).
Fox, M. Quantum Optics: An Introduction (Oxford Univ. Press, New York, 2006).
Lvovsky, A. I., Sanders, B. C. & Tittel, W. Optical quantum memory. Nat. Photonics 3, 706 (2009).
Tittel, W. et al. Photon echo quantum memory in solid state systems. Laser Photonic Rev. 4, 244 (2010).
Lodahl, P., Mahmoodian, S. & Stobbe, S. Interfacing single photons and single quantum dots with photonic nanostructures. Rev. Mod. Phys. 87, 347 (2015).
Bayer, M. Bridging two worlds: colloidal versus epitaxial quantum dots. Ann. Phys. 531, 1900039 (2019).
Borri, P., Langbein, W., Schneider, S. & Woggon, U. Ultralong dephasing time in InGaAs quantum dots. Phys. Rev. Lett. 87, 157401 (2001).
Bonadeo, N. H. et al. Coherent optical control of the quantum state of a single quantum dot. Science 282, 1473 (1998).
Flissikowski, T., Betke, A., Akimov, I. A. & Henneberger, F. Twophoton coherent control of a single quantum dot. Phys. Rev. Lett. 92, 227401 (2004).
Stievater, T. H. et al. Rabi oscillations of excitons in single quantum dots. Phys. Rev. Lett. 87, 133603 (2001).
Zrenner, A. et al. Coherent properties of a twolevel system based on a quantumdot photodiode. Nature 418, 612–614 (2002).
Ramsay, A. J. et al. Phononinduced Rabifrequency renormalization of optically driven single InGaAs/GaAs quantum dots. Phys. Rev. Lett. 105, 177402 (2010).
Suzuki, T. et al. Coherent control of the excitonbiexciton system in an InAs selfassembled quantum dot ensemble. Phys. Rev. Lett. 117, 157402 (2016).
Wigger, D. et al. Rabi oscillations of a quantum dot exciton coupled to acoustic phonons: coherence and population readout. Optica 5, 1442 (2018).
Wu, Y. et al. Population inversion in a single InGaAs quantum dot using the method of adiabatic rapid passage. Phys. Rev. Lett. 106, 067401 (2011).
Simon, C.M. et al. Robust quantum dot exciton generation via adiabatic passage with frequencyswept optical pulses. Phys. Rev. Lett. 106, 166801 (2011).
Stufler, S., Ester, P., Zrenner, A. & Bichler, M. Ramsey fringes in an electricfieldtunable quantum dot system. Phys. Rev. Lett. 96, 037402 (2006).
Michaelis De Vasconcellos, S., Gordon, S., Bichler, M., Meier, T. & Zrenner, A. Coherent control of a single exciton qubit by optoelectronic manipulation. Nat. Photonics 4, 545 (2010).
Poltavtsev, S. V. et al. Photon echo transients from an inhomogeneous ensemble of semiconductor quantum dots. Phys. Rev. B 93, 121304 (2016).
Poltavtsev, S. V. et al. Damping of Rabi oscillations in intensitydependent photon echoes from exciton complexes in a CdTe/(Cd,Mg)Te single quantum well. Phys. Rev. B 96, 075306 (2017).
Allen, L. & Eberly, J. H. Optical Resonance and TwoLevel Atoms (Wiley, New York, 1975).
Slichter, C. P. Principles of Magnetic Resonance Ch. 8 (Springer, Berlin, 1990).
Carr, H. Y. & Purcell, E. M. Effects of diffusion on free precession in nuclear magnetic resonance experiments. Phys. Rev. 94, 630 (1954).
Meiboom, S. & Gill, D. Modified spin echo method for measuring nuclear relaxation times. Rev. Sci. Instrum. 29, 688 (1958).
Hartmann, S. R. & Hahn, E. L. Nuclear double resonance in the rotating frame. Phys. Rev. 128, 2042 (1962).
Sleva, E. T., Xavier, I. M. & Zewail, A. H. Photon locking. J. Opt. Soc. Am. B 3, 483 (1986).
Yodh, A. G., Golub, J., Carlson, N. W. & Mossberg, T. W. Optically inhibited collisional dephasing. Phys. Rev. Lett. 53, 659 (1984).
Carlson, N. W., Babbitt, W. R., Bai, Y. S. & Mossberg, T. W. Fieldinhibited optical dephasing and shape locking of photon echoes. Optics Lett. 9, 232 (1983).
Zhong, T. et al. Nanophotonic rareearth quantum memory with optically controlled retrieval. Science 357, 1392–1395 (2017).
Rose, H. Numerische Simulationen zum MultiWellenMischen an Ensemblen von ZweiNiveauSystemen, Bachelor Thesis (Universität Paderborn, 2018).
Berman, P. R. & Malinovsky, V. S. in Principles of Laser Spectroscopy and Quantum Optics Ch. 9 (Princeton Univ. Press, 2011).
Maier, S. et al. Bright single photon source based on selfaligned quantum dotcavity systems. Opt. Express 22, 8136–8142 (2014).
Poltavtsev, S. V. et al. Polarimetry of photon echo on charged and neutral excitons in semiconductor quantum wells. Sci. Rep. 9, 5666 (2019).
Krügel, A., Axt, V. M., Kuhn, T., Machnikowski, P. & Vagov, A. The role of acoustic phonons for Rabi oscillations in semiconductor quantum dots. Appl. Phys. B 81, 897 (2005).
Monniello, L. et al. Excitationinduced dephasing in a resonantly driven InAs/GaAs quantum dot. Phys. Rev. Lett. 111, 026403 (2013).
Chaneliére, T. & Hetet, G. Lightshiftmodulated photonecho. Opt. Lett. 40, 1294–1297 (2015).
Ham, B. S. A controlled ac Stark echo for quantum memories. Sci. Rep. 7, 7655 (2017).
Bartholomew, J. G. et al. Controlling rareearth ions in a nanophotonic resonator using the ac Stark shift. Phys. Rev. A 97, 063854 (2018).
Poltavtsev, S. V., Yugova, I. A., Akimov, I. A., Yakovlev, D. R. & Bayer, M. Photon echo from localized excitons in semiconductor nanostructures. Phys. Solid State 60, 1635 (2018).
Meier, T., Thomas, P. & Koch, S. W. Coherent Semiconductor Optics: From Basic Concepts to Nanostructure Applications (Springer, New York, 2007).
Acknowledgements
Support by Dr. S. Maier in the epitaxial growth of the sample is gratefully acknowledged. We are grateful to D. Suter and C. Schmidt for useful discussions. We acknowledge financial support from the Deutsche Forschungsgemeinschaft (DFG) through the Collaborative Research Centre TRR 142 (project number 231447078, project A02). S.V.P. thanks the Russian Foundation for Basic Research (Project number 195212046) and the Saint Petersburg State University (Grant number 51125686). The Würzburg group acknowledges financial support by the state of Bavaria.
Funding
Open Access funding enabled and organized by Projekt DEAL.
Author information
Authors and Affiliations
Contributions
A.N.K., S.V.P., and I.A.A. performed the experiments and analyzed the data. H.R., M.R., and T.M. developed the theoretical model and performed the simulations. C.S., M.K., and S.H. fabricated the samples. A.N.K., H.R., S.V.P., M.R., M.B., T.M., and I.A.A. conceived the idea for the experiment and cowrote the paper. All authors discussed the results and commented on the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Kosarev, A.N., Rose, H., Poltavtsev, S.V. et al. Accurate photon echo timing by optical freezing of exciton dephasing and rephasing in quantum dots. Commun Phys 3, 228 (2020). https://doi.org/10.1038/s42005020004912
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s42005020004912
This article is cited by

Extending the time of coherent optical response in ensemble of singlycharged InGaAs quantum dots
Communications Physics (2022)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.