The subclass of multi resonant thermally activated delayed fluorescent emitters (MR-TADF) containing boron atoms has garnered significant attention in the field of organic light emitting diode (OLED) research. Among boron-based MR-TADF emitters, double boron-embedded MR-TADF (DB-MR-TADF) emitters show excellent electroluminescence performances with high photoluminescence quantum yields, narrow band emission, and beneficially small singlet-triplet energy levels in all the full-color gamut regions. This article reviews recent progress in DB-MR-TADF emitters, with particular attention to molecular design concepts, synthetic routes, optoelectronic properties, and OLED performance, giving future prospects for real-world applications.
Since 2012, thermally activated delayed fluorescence (TADF) emitters have received significant attention for their application in organic light-emitting diodes (OLEDs), replacing the expensive noble metal atom-based phosphorescent emitters1,2,3,4,5,6,7,8,9,10. These emitters usually exhibit a small singlet-triplet energy gap (ΔEST), which facilitates spin flipping of the reverse intersystem crossing (RISC) in excited states11,12. Primarily, conventional TADF emitters are designed based on donor-acceptor (D-A) configuration1,13,14,15. Such combinations of donor and acceptor play a significant role in electron density distributions and allow the clear separation between the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), resulting in reduced ∆EST values2,3,16,17,18,19. As of now, many TADF emitters are showing tremendous performances in all the color regions16,20,21. However, most of the TADF emitters are showing intramolecular charge transfer (ICT) characteristics, which cause structural relaxation in the excited state, and large stokes shift, and broad emission spectra6,22,23,24,25,26,27,28,29. Such broad emissions are detrimental to achieve high color purity for future OLED applications3,7,30.
Usually, the CIE (International Commission on Illumination) coordinates envisaged the full-color regions that can be obtained by combining the three primary colors (red (R), green (G), and blue (B)) by varying the wavelength and emission intensity31. However, recently, the International Telecommunication Union (ITU) announced a new color gamut standard for ultra-high-definition TV (UHDTV) called the Broadcast Service Television 2020 (BT 2020) with CIE coordinates for the R, G, and B colors of (0.708, 0.292), (0.170, 0.797), and (0.131, 0.046), respectively32,33. So to achieve such deep-level color coordinates, the emitters required extremely narrowband emission spectra. Among the reported TADF emitters, the boron-based D-A configured push-pull materials are efficiently performed in OLEDs, but rather they also exhibit FWHM ~50 nm34. Such detailed boron-based materials were already summarized in our previous review papers34,35. In 2016, Hatakeyama et al. unveiled a new molecular design concept based on the multiple resonance effect of boron (B) and nitrogen (N) atoms and developed DABNA-136. This design allows the HOMO and LUMO separation with opposite resonance effects on the same π-conjugated plane. Usually, this multi-resonant TADF (MR-TADF) manifested short-range CT (SRCT) character from their LUMOs localized on the electron-withdrawing atoms (B) and at the ortho and para positions relative to them. At the same time, HOMOs will be restricted on the electron-donating atoms (N or O) and at the meta positions relative to electron-withdrawing atoms37,38. This MR effect-suppressed vibronic coupling leads to a narrow full width at half maximum (FWHM), and the rigid molecular structure helps realize a minimal Stokes shift below 30 nm, resulting in a low reorganization energy and high photoluminescence quantum yield (PLQY)39,40,41,42,43,44. Notably, compared to conventional TADF emitters, the MR-TADF emitters have significant advantages such as high color purity (high PLQY) and narrow emission spectra with FWHM of ~30 nm35,38,39,45,46,47. As of now, many groups developed over 100 molecules in MR-TADF emitters. Among the reported boron-embedded MR-TADF compounds, the double boron-embedded MR-TADF (DB-MR-TADF) emitters are performing tremendously in OLEDs compared to single boron-embedded MR-TADF (SB-MR-TADF) materials33,48,49,50,51,52,53,54,55 (Fig. 1). For example, in the blue region, the emitter ν-DABNA shows extremely narrow FWHM and high external quantum efficiency (EQE) of ~35%56. Even in green (ν-DABNA-CN-Me)57 and red (BNO1)58 color regions, the maximum EQE is crossed over 30% in the benchmark of DB-MR-TADF emitters.
In this review, we mainly focus on the recent developments in DB-MR-TADF emitters based on full-color regions. We categorize these materials according to their respective colors (RGB). Rational molecular design strategies to achieve narrow PL and EL emission and the related electronic structure and optoelectronic characteristics, including the resulting device performances, are discussed to understand the underlying mechanisms for controlling the emission bandwidth. Further, we even discussed the synthetic aspects utilized for DB-MR-TADF emitters. Finally, we provide our summary and future perspectives on the remaining challenges in this research area that must be overcome to develop the next generation of wide-color gamut OLED displays.
Blue DB-MR-TADF emitters
Firstly, Hatakeyama et al. developed inverted DABNA-type emitters, which are azadiboranaphthoanthracenes (ADBNAs) based on two boron and one nitrogen atom; which are comparable to conventional DABNA analogs59. The synthesis was succeeded by lithiated with tert-butyllithium followed by boron tribromide in the tert-butylbenzene solvent. Further, the treatment of magnesium bromide type precursor can yield both emitters, namely, ADBNA-Me-Mes and ADBNA-Me-Tip. Both the emitters exhibited PLmax of ~480 nm in DOBNA-OAr film. Importantly these materials showed red-shifted emission compared to DABNA-1 (PLmax: 460 nm). Furthermore, both materials manifested a small ΔEST of ~0.20 eV, indicating the presence of better TADF. When the OLED device is fabricated with both materials with the support of DOBNA-OAr (as host), the EL manifested sky blue emission with ELmax of ~480 nm with FWHM of less than 33 nm. The ADBNA-Me-Tip showed a better EQEmax of 21.4% compared to ADBNA-Me-Mes (EQEmax of 16.2%) due to an increase in light outcoupling efficiency and molecular orientation factors. It is also observable that both materials’ approach is better compared to DABNA-1 as they exhibit bathochromic shift with better EL performances and low roll-off characteristics.
Later, Wang et al. reported a series of ADBNA materials60 by incorporating a donor (nitrogen) center in a triangulene shape, similar to the ADBNA series reported by Hatakeyama et al. (Fig. 2). The synthesis of all the designed materials had symmetric and unsymmetrical nature. Among all materials, 6b showed significantly less ∆EST of 0.13 eV in the 1 wt% PMMA matrix; however, a low PLQY of 18% was observed. Compounds 3–5b showed MR-TADF characteristics with positive solvatochromism and narrow FWHM. In the case of 6a and 6b, there is an observable insight that two emission peaks were observed. The emissions were located at 477/481 and 609/601 nm in the dichloromethane solution. In the case of 3, the blue emission band is like MR-TADF in nature with a narrow emission spectrum. But in the case of 6b, it showed a low energy emission band showing strong ICT characteristics like conventional D-A type emitters. In this work, authors mainly focused only synthesis point of view; no devices were fabricated with the designed emitters to identify the EL performances. However, from the overall point of view, these ADBNA-type emitters are one type of class with an alternative in the finding MR-TADF. However, from a device point of view, these are still not so good and sound for real applications.
Hatakeyama et al. developed new emitter’s through multiple borylation methods. Among them, the B2 shows a higher synthetic yield of 80% and exhibited sky blue emission with the PLmax of 455 nm and the FWHM of 32 nm61. Further, the nature of the material is analyzed by X-ray crystallography, and it manifests helical nature. The OLED is fabricated with a mCBP host, and B2 as emitter exhibited a high EQEmax of 18.3% with the ELmax of 460 nm and CIE coordinates of (0.13, 0.11). From this borylation method, it is understood that double or triple boron incorporation is possible by using BBr3 or BI3 with the support of a Hünig base in reducing solvents. Even though this design allows for new insights into the synthetic perspective, it is tough to proceed for large-scale purposes.
Again in 2019, the same group reported a fully fused system consisting of five benzene rings connected by two boron and four nitrogen atoms and two diphenylamine groups named it N7,N7,N13,N13,5,9,11,15-octaphenyl-5,9,11,15-tetrahydro-5,9,11,15-tetraaza-19b,20b-diboradinaphtho[3,2,1-de:1′,2′,3′-jk]pentacene-7,13-diamine (ν-DABNA), which has been benchmarked in MR-TADF emitters till date56. In this design, the boron is surrounded by nitrogen atoms with proper positions to observe the clear MR effect in alternative atoms. The MR effect is regarded as expected on boron/nitrogen atoms, which induce the HOMO and LUMO density localizations on different atoms. This even minimizes their bonding/antibonding character and vibrational coupling between ground and excited states. Such a feature allows getting the extremely narrow FWHM spectra. The synthesis of ν-DABNA is done in three steps by using simple available commercially starting compounds with the support of palladium-catalyzed reactions. The foremost critical final step involves the one-pot double borylation using the tandem bora Friedel crafts reaction (BBr3). As a result, the ν-DABNA manifested blue emission with the PLmax of 469 nm and FWHM of 14 nm in toluene solution. Furthermore, this design indicates that joining the fused DABNA-1 analogs36 increases the fused aromatic ring systems as well. Additionally, this design gives an extremely small ΔEST value of 17 meV, which is the best in MR-TADF emitters. ν-DABNA also manifested a high RISC rate constant of 2.0 × 105 s−1, which is higher than conventional previous report DABNA analogs. Furthermore, ν-DABNA also showed a high PLQY of ~90% with highly bright blue emission. The OLED fabricated with 1 wt% ν-DABNA and 99 wt% DOBNA-OAr (as a host) showed tremendous performances. The EL characteristics showed sky blue emission with ELmax of 469 nm with narrow FWHM of 18 nm. Furthermore, the OLED exhibited a maximum EQE of 34.4% with CIE coordinates of (0.12, 0.11). This work shows excellent EL performances compared to other reported materials in blue color. From the design point of view, it is clearly understood that this type of design allows getting the high PLQY, extremely narrow FWHM, and high RISC values. However, In the case of ν-DABNA, the CIE y coordinate is 0.11, which deviates from NTSE and BT2020 pure blue color requirements.
Later same group developed ν-DABNA-OMe to shift the CIE y coordinate towards pure blue color62. The design is based on the utilization of an oxygen atom instead of one nitrogen atom in the ν-DABNA core. Due to the lower atomic energy, the oxygen atoms deviate the HOMO energy compared to the LUMO energy, which results in the band gap increment. The synthesis of the ν-DABNA-OMe succeeded with the support of BI3 instead of BBr3. The ν-DABNA-OMe exhibited sharp pure blue emission at 464 nm with the FWHM of 19 nm in toluene solution. Precedently, the ν-DABNA-OMe showed a 5 nm blue-shifted compared to ʋ-DABNA. The ΔEST value of 29 meV is higher compared to the ν-DABNA ΔEST value; however, blue-shifted emission is obtained. The OLEDs were fabricated with the help of DOBNA-Tol as host and the ν-DABNA-OMe as dopant (with 1 wt%). The device showed a high EQE of 29.5% with a pure blue emission at 464 nm and FWHM of 24 nm. Notably, ν-DABNA-OMe displayed alleviated efficiency roll-off of only 2.6% at 1000 cd/m2 compared to ν-DABNA (8.4%) due to the reduced bimolecular quenching process like TTA/TPA. Consequently, the ν-DABNA-OMe manifested a CIE y coordinate of 0.10, which is very near to NTSE pure blue requirements. Notably, the ν-DABNA-OMe revealed a long lifetime (LT50) of 314 h at 100cdm−2 compared to the previous ν-DABNA (31 h). This indicates that the ν-DABNA-OMe is ten times longer in lifetime concern compared to ν-DABNA. Even though this ν-DABNA-OMe showed blue-shifted emission compared to ν-DABNA, there are still some disadvantages. Such as, FWHM increased from 14 to 19 nm, ΔEST risen from 17 to 29 meV, and RISC decreased from 2.0 × 105 to 1.6 × 105 s−1. Furthermore, CIE y of 0.10 is still insufficient for NTSE and BT 2020 pure blue color requirements.
To improve the color purity, later on, Yasuda et al. unveiled the new molecular design by replacing the intracyclic nitrogen with oxygen/sulfur atoms. They developed by utilizing two oxygen atoms (BOBO-Z), one oxygen and one sulfur (BOBS-Z), and two sulfur atoms (BSBS-Z)63. All the designed emitters are expected to show the blue-shifted emission as they contain the weak electron donating ability atoms (O or S). All three emitters were synthesized via double tandem lithiation–borylation–annulation reactions. Consequently, all three emitters exhibited PLmax ranges from 441 to 460 nm with narrow FWHM. All the emitters showed blue-shifted emissions compared to ʋ-DABNA and ν-DABNA-OMe. Notably, BOBO-Z, BOBS-Z, and BSBS-Z demonstrated intense ultrapure blue emissions with CIE color coordinates of (0.15, 0.03), (0.15, 0.06), and (0.14, 0.07), respectively. Such low CIE y coordinates match near NTSE and BT2020 pure blue color requirements. Among the three, the sulfur-doped materials BOBS-Z and BSBS-Z show improved PLQY compared to conventional ν-DABNA. Due to the heavy atom (sulfur), the BOBS-Z and BSBS-Z manifested significantly high RISC rate values of 8.6 × 105 and 1.6 × 106 s−1, respectively, which were 2.6 and 4.9 times higher than that of ν-DABNA. Further, with the support of the mCBP host, the OLEDs were fabricated. As like in the PL emission, the EL of the compounds showed pure-blue emission, 445 (BOBO-Z), 456 (BOBS-Z), and 463 nm (BSBS-Z), and narrow FWHM falls in the range of 18–23 nm, which indicates expected hypsochromic shift compared to the ν-DABNA (472 nm). The intriguingly, OLEDs showed excellent color purity with CIE(x, y) of (0.15, 0.04) for BOBO-Z, (0.14, 0.06) for BOBS-Z, and (0.13, 0.08) for BSBS-Z fulfilling the requirements of Rec.2020 standard of UHD OLEDs. The S-containing derivatives showed stand-out performance with EQEmax of 26.9 and 26.8% over BOBO-Z (13.6%) and ν-DABNA (26.6%) due to their fast RISC mechanism. Initially, the device stability was analyzed in the unipolar host, mCBP, and showed a very short lifetime; further, it was improved (LT50 > 30 h at 100 cd/m2) by replacing the mCBP with bipolar host mCBP-CN. Though authors achieved considerable blue shift and excellent color purity compared to ν-DABNA with the key to design heteroatom interplay, they exhibited low EQE ≤ 27%, and especially BOBO-Z is showing very less EQE of less than 14% in the deep blue color region.
Naveen et al. unveiled a new molecular design by incorporating the fluorine atoms and methyl groups in conventional ν-DABNA and designed three emitters, namely, m-ν-DABNA, 4F-ν-DABNA, and 4F-m-ν-DABNA, respectively64. Using methyl groups at para positions to the boron atoms and fluorine atoms at ortho positions to the intracyclic nitrogen (N) atoms resulted in bandgap enhancement by electron donating and electron withdrawing effects. These materials were synthesized using a stoichiometric amount of BBr3 and o-Dichlorobenzene solvent at a high temperature (190 °C) and succeeded in one-pot double boron-cyclizations. Comparatively, all three emitters showed a high synthetic yield of over 32%, indicating ease for commercial scales ups. Furthermore, all these three emitters exhibited high decomposition temperatures (Td) over 480 °C, indicating their molecular stability for real display applications. Further, as expected, the PL spectra in toluene solution displayed strong and narrow blue emission maximum peaks at 464, 457, and 455 nm for m-ν-DABNA, 4F-ν-DABNA, and 4F-m-ν-DABNA, respectively. Notably, all these areas manifested hypsochromic shifted emission with the extremely narrow FWHM of 14 nm. All three emitters even showed extremely low ΔEST values of less than 0.07 eV, indicating their ability to TADF process. The PLQY of all these materials is maintained to be high at ~90%. Interestingly the RISC rate was improved for all three emitters compared to conventional ν-DABNA. Further, the OLEDs were fabricated by using DBFPO as a host due to the advantage of high triplet energy. All three emitters showed extremely narrow blue emissions with an FWHM of only 18 nm, indicating their high molecular rigidity. Consequently, all three emitters exhibited CIE coordinates of (0.12, 0.12), (0.13, 0.08), and (0.13, 0.06) for m-ν-DABNA, 4F-ν-DABNA, and 4F-m-ν-DABNA, respectively, approaching the clear NTSE and BT2020 pure blue color requirements. Furthermore, all three emitters revealed a high EQE of over 33% in pure blue color, which is far better than BOBO-Z moiety63. These results are benchmarked in pure blue MR-TADF OLEDs with the CIE ≤ 0.1 with a narrow FWHM of 18 nm.
Even though ν-DABNA modified analogs showed the best performances, some drawbacks still exist, such as high molecular weight and low RISC and roll-off characteristics. To overcome this, Naveen et al. recently developed new blue emitters, namely TPD4PA and tBu-TPD4PA65. The core is somewhat new considering the highly stable DOBNA moiety in the proper molecular design34,66,67,68,69. The TPD4PA is designed by amalgamating the high CT characteristic DOBNA and MR-type emitter PAB70. This design restricts the HOMO energy due to rigid oxygen DOBNA and increases the bandgap, witnessing the pure blue emission. The fully fused TPD4PA/tBu-TPD4PA was synthesized using commercially available starting materials in four steps. Among them, the final one-pot double borylation was done using the BBr3 and 1,2,4-trichlorobenzene solvent at a high temperature (180 °C). Interestingly, unlike other MR-TADF emitters, both emitters have resulted in a high synthetic yield of ~25%. As expected, the optical bandgap (2.75 and 2.71 eV for TPD4PA and tBu-TPD4PA) was increased compared to ν-DABNA (optical bandgap: 2.60 eV). Compared to other reported double boron MR-TADF emitters, these materials showed tremendous improvement in thermal stability as they revealed high decomposition temperatures (Td) of 521 °C for TPD4PA and 515 °C for tBu-TPD4PA, respectively. Both the emitters showed the PLmax of 445 (TPD4PA) and 451 nm (tBu-TPD4PA) in toluene solution with the FWHM of 19 nm for both. Comparatively, the small ΔEST values are also retained with this design concept. Mainly, both the emitters exhibited a high RISC rate ~2.51 × 105 s−1, which is higher than single boron MR-TADF (DOBNA, DABNA-1, and PAB) and double boron MR-TADF emitters (ν-DABNA, ν-DABNA-OMe, and BOBO-Z) also. A further interesting fact is that the TADF mechanism occurred via three steps, including (i) IC from T1 to T2, (ii) RISC from T2 to S1, and (iii) fluorescence from S1. This was clarified with the support of SOC calculation, indicating the <S1|ĤSOC|T2>is almost 3.3 times of <S1|ĤSOC|T1> value for both materials. Further, the TADF-OLEDs were fabricated using mCBP-CN as a host due to its ET-type character with deep LUMO energy level. The OLEDs showed maximum EQEs of 30.7 and 32.5% for TPD4PA and tBu-TPD4PA. Both the devices exhibited narrow band deep blue emission with the CIE y coordinates match near NTSC and BT2020 blue color requirements.
From the above discussion, it is understood that all the designs only restricted the HOMO/LUMO at specific positions of the conventional ν-DABNA. So based on that, here we gathered all the design concepts based on ν-DABNA and depicted in Fig. 3. The advantages of utilizing ν-DABNA are highly recommendable for real commercial applications. However, the other design concepts can also pave the pathways for future development design with good new ideas.
Meanwhile, Chuluo yang et al. recently developed three deep blue MR-TADF emitters (BN1-BN3) featuring fully fused structures71. In this, they achieved all the targets from the same precursor. Due to the molecular rigidity of all three emitters, more negligible structural relaxation and narrower spectra can be expected. Among all the materials, BN1 showed a high synthetic yield of 68% compared to other emitters, BN2 (39%) and BN3 (55%). This is due to the HOMO delocalization major at the carbon atoms of the central benzene position. In the case of BN3, the utilization of 24 equivalents of BBr3 with a high temperature only occurs. Interestingly, BN3 adopted a more twisted scaffold due to unique B, N, B-doped  helicene. Notably, all the emitters exhibited pure and narrowband deep blue emissions with an FWHM of less than 18 nm in toluene solution. Furthermore, all three showed significantly lower ΔEST values of ≤0.20, indicating the effectiveness of the TADF mechanism. The BN3 shows a very high PLQY of 98% compared to all the reported double boron-embedded emitters. This is due to the increased molecular rigidity with the double helicene structures. This also helped to grow the RISC constant values. This material (BN3) also confirmed that the RISC mechanism might occur via the T2 state as the SOC values of S1 and T2 are higher than those of S1 and T1. The OLEDs were fabricated by adopting the hyperfluorescence system. The emissive layer contains DBFPO:25 wt% 3Cz2BN:1 wt% of BN1-BN3. The OLEDs manifested narrowband pure blue emission at 457, 467, and 458 nm with FWHM values of 28, 23, and 23 nm for BN1, BN2, and BN3, respectively. Compared to BN1 and BN2, BN3 showed tremendous performance with the EQEmax of 37.6% due to the improved RISC process. Furthermore, the CIE y coordinate of BN3 is led 0.08, which also matches NTSE pure blue color requirements. So from this contribution, we can understand that enhancing the molecular rigidity by extended skeleton would benefit smaller reorganization energy to narrow the emission spectrum.
Yasuda et al. reported a new molecular design based on nano graphitic fused nonacyclic π-system (BSBS-N1) as another double-boron embedded material class. The structure contains two boron and sulfur atoms with one nitrogen atom in a fused system72. The BSBS-N1 was synthesized in five steps from the commercially available starting materials. The critical step, cyclization, is done using the one pot double tandem lithiation and borylation annulation, which also resulted in a reasonable yield of 18%. Notably, the BSBS-N1 displayed pure sky blue emission at 478 nm with an FWHM of 21 nm and a high PLQY of 89%. Even though the heavy atoms are incorporated, the ΔEST value is meager as 0.14 eV, indicating their positivity towards TADF emission. Furthermore, BSBS-N1 showed a very high RISC of 1.9 × 106 s−1, which is much higher than all the ν-DABNA analogs. OLEDs fabricated with the BSBS-N1 showed a maximum EQE of 21% but fewer roll-off characteristics than other reported MR-TADF emitters. This design clearly shows that the heavy atoms can play a crucial role in increasing the RISC with proper molecular rigid structure.
Very recently, Colman et al. unveiled a new molecular design and developed 2B-DTACrs73. The 2B-DTACrs were synthesized using the commercially available starting materials in five steps. The designed 2B-DTACrs resulted in a high synthetic yield of 58%. Due to the effect of meta B-π-B and O-π-O combination, the 2B-DTACrs showed narrow FWHM of 21 nm in deep blue emission (PLmax of 443 nm). The deep blue emission is expected as this contains the meta O-π-O than N-π-N (ν-DABNA). Due to the rigid molecular design, the 2B-DTACrs showed a very low ΔEST value of 0.16 eV, leading to a high RISC rate of 1.3 × 105 s−1. The OLED is fabricated with 5 wt% of 2B-DTACrs in the mCP host. The device manifested a high EQE of 14.8% with ELmax of 447 nm and FWHM of 26 nm. The corresponding CIE coordinates are ((0.150, 0.044), very close to BT2020 pure blue color requirements.
Precedently, Kido et al. reported pure blue emitters with the design considering the meta B-π-B and O-π-O and weak conjugation effect74. The designed emitter m-DiNBO was synthesized in three steps. The final step involves bromide-lithium exchange reaction-based one-pot borylation. The m-DiNBO manifested PL emission at 456 nm with FWHM of 17 nm and a high PLQY of 87%. When the m-DiNBO is deposited in the doped mCBP film, the PLQY is improved to 94%, indicating that small host-dopant interaction might be there. Finally, the OLEDs were fabricated with 3 wt% m-DiNBO -doped mCBP and showed a deep blue emission at 466 nm with an FWHM of 21 nm. The corresponding CIE coordinate of m-DiNBO is 0.098, with the EQEmax of 24.2%. Mainly the m-DiNBO showed reduced efficiency roll-off characteristic compared to single boron NBO due to the lower delayed exciton lifetime (τd) value of 31.4 μs for m-DiNBO than that for NBO (τd = 86.6 μs). This design is very insightful as they used tert-butyl carbazole as their starting materials and created the ν-DABNA style type.
Green to yellow DB-MR-TADF emitters
In 2020, Hatakeyama et al. unveiled a new molecular design by fusing the two MR analogs to get the double boron-based green emitter. The design emitter (OAB-ABP-1) represents a fully fused, resonating, extended π-skeleton by amalgamating the ADBNA59 and DOBNA75 substructures76. The OAB-ABP-1 was synthesized like other DB-MR-TADF emitters, but the final step succeeded by using the BI3 at 150 °C. As a result, the OAB-ABP-1 gave an 18% synthetic yield by forming six C-B bonds. In addition, the ease of cyclization is favored due to mesityl and methyl groups. As a result, the OAB-ABP-1 shows pure green emission with PLmax of 506 nm and the FWHM of 34 nm in a 1 wt% PMMA matrix. Notably, the film offers a high PLQY of 90%, which is far better than typical green D-A type emitters. Precedently, the ΔEST was found to be 0.12 eV, smaller than those of DOBNA and ADBNA-Me-Mes (0.18 and 0.20 eV, respectively). Due to the support of small ΔEST, the OAB-ABP-1 showed a better RISC value than single boron-based DOBNA and ADBNA-Me-Mes59. Further, the solution-processed OLEDs were fabricated with the help of polymers. As a result, the device showed pure narrowband green emission with ELmax of 505 nm with an FWHM of 33 nm. Consequently, the device revealed high EQE of 21.8% and 19.6% at 10 and 100 cd m−2, respectively. The important central insight in this device is there is significantly less roll-off characteristic (<2.5%) observed, indicating their stability. Furthermore, the OLED showed a half-lifetime of 11 h at 300 nits. This was the first reported double boron-embedded green MR-TADF emitter. However, although this material showed outstanding performance, the FWHM is very broad, affecting the OLED’s color purity.
Zheng et al. reported the two emitters (DBON and DBSN) by considering the para B-π-B and the introduction of hetero atoms (S and O) in para each other (Fig. 4)77. Due to the para B-π-B, the red-shifted emission can be expected compared to meta B-π-B (ν-DABNA). Furthermore, the hetero atoms’ involvement can even improve the RISC process for efficient TADF. Both the emitters were prepared via successive simple nucleophilic reactions and one-pot lithiation-borylation-annulation. The final double boron cyclization has resulted in low yield, but the thermal stability is much higher as they have fused rigid molecular structures like ν-DABNA. Consequently, the DBON/DBSN exhibited PLmax of 505/553 nm in the toluene solution with the FWHM of 20/28 nm. Compared to OAB-ABP-1, the DBON is better in the FWHM, which allows for high color purity in real applications. Notably, both the emitters showed a very small ΔEST of 0.13 eV, indicating their TADF phenomenon. Furthermore, due to the fused π core, both the emitters showed a high PLQY of 98%, indicating the limitation of the molecular nonradiative transitions. Due to the heavy atom sulfur, the DBSN showed yellow emission and a high RISC rate of 1.9 × 105 s−1. This RISC rate is better compared to other reported single boron MR-TADF emitters. Further, the OLEDs were fabricated using mCBP as host and DBON and DBSN as dopant. The device manifested high EQE of 26.7 and 21.8% for DBON and DBSN, respectively. The DBON and DBSN revealed pure green and yellow emissions with ELmax of 510 and 556 nm and FWHM of 29 and 43 nm. Consequently, the corresponding CIE coordinates are (0.17, 0.68) and (0.42, 0.57) for DBON and DBSN, which match NTSE requirements. Due to the heavy atom (high RISC), the DBSN showed suppressed roll-off characteristics to DBON. Meanwhile, the same DBON is reported by Yue Wang et al., where named the material DBNO78. DBNO as a dopant in hyperfluorescence OLED presented tremendous EQE of 37.1% with the pure green emission at ELmax of 504 nm and FWHM of 27 nm. Kido et al. recently synthesized p-DiNBO (same as DBNO) compared to m-DiNBO (meta B-π-B)74. The design allows for strong π-conjugation so that bathochromic shift can be retained. Compared to m-DiNBO, the p-DiNBO is ~45 nm red-shifted, indicating the strong effect of extended π-conjugation. The OLED architecture is utilized the same as the m-DiNBO device with 3 wt% in the mCBP host. The OLED revealed a high EQE of 21.6% with ELmax of 513 nm and a CIE coordinate of (0.258, 0.665). However, compared to a single boron-based emitter (NBO), the p-DiNBO showed better EL performances.
Hatakeyama et al. recently unveiled a new molecular design for extremely narrowband green emission (ν-DABNA-CN-Me)57. The design is based on incorporating cyano substitutions on a para to Boron atom in the previously reported blue narrow band emitter ν-DABNA, allowing for bathochromic shifted emission. As the electron-withdrawing group, CN (accepting strength) at para positions to boron can decrease the LUMO energy level and increase the band gap. Initially, the two boron atoms were successfully embedded with the support of BI3 at a low temperature (70 °C). Next, the palladium-catalyzed double cyanation was done to get the final emitter ν-DABNA-CN-Me with a high synthetic yield of 43%. As a result, the ν-DABNA-CN-Me manifested PLmax of 496 nm with the FWHM of 17 nm only. This was the first material with such extremely narrow FWHM in the green region in the state-of-art DB-MR-TADF emitters. Due to the considerable ΔEST of 100 eV, the RISC was high as 1.0 × 105 s−1. The OLED is fabricated with the ET-type host material (99.5 wt% DOBNA-Ph) with 0.5 wt% of ν-DABNA-CN-Me. The fabricated OLED showed pure narrowband green emission with ELmax of 504 nm and FWHM of 23 nm. Notably, the device manifested a high EQE value of 31.9% at 10 cd/m2. Interestingly, the roll-off characteristics are best among the green MR-TADF emitters as they possess the EQE values of 31.5% and 28.5%, even at 100 and 1000 cd/m2, respectively. Consequently, the OLED showed a long lifetime (LT80) of 59 h, which is better than previous ν-DABNA-based designs. From this design, it is understood that the role-play of LUMO distribution can impact the bathochromic shift without losing color purity (Fig. 4).
Red DB-MR-TADF emitters
For the first time, Yasuda et al. developed a pure red color emitter, namely, BBCz-R79. The design is based on enhancing the donating/accepting strengths by considering para B-π-B and N-π-N in one central benzene. The BBCz-R was synthesized in three steps, including the nucleophilic aromatic substitution followed by one-shot tandem borylation with BBr3 and Hunig’s base support. As a result, the BBCz-R resulted in a low synthetic yield of just 5% in the final boron-cyclization step. Notably, the 5% weight-loss decomposition temperatures (Td) of BBCz-R are high as 533 °C, indicating good thermal stability. Furthermore, due to the 17-ring fused system, the BBCz-R showed a helical-type twisted configuration. Interestingly, the BBCz-R revealed narrowband pure red emission with the PLmax of 615 nm and FWHM of 21 nm in the toluene solution. Further, the OLED is fabricated with the emissive layer of the mCBP host and the BBCz-R dopant (2 wt%). As a result, the OLED showed an ELmax of 616 nm with an FWHM of 26 nm. Such narrow FWHM is attributed to the high molecular rigidity and increased fused ring systems. Notably, the OLED revealed a high EQE of 22% with the pure red color (CIE coordinates: (0.67, 0.33)). This is good work for the future development of red MR-TADF emitters. However, from the synthetic point of view, it is hard to achieve a high yield due to double borylation.
By considering a similar design strategy, Duan et al. developed two deep red MR-TADF emitters, R-BN and R-TBN80. The multiple B and N atoms were embedded in the central phenyl ring with the combination of B-phenyl-B and N-phenyl-N atoms, which enables the strong π-conjugation and allows for a narrow bandgap. The R-BN contains four carbazole units, whereas R-TBN has four tert-butyl substituted carbazole units. R-BN and R-TBN were synthesized in two steps from commercially available starting materials. The key boron cyclization was done using BBr3 and Hunig base and achieved a high reasonable yield of ~40%. The synthesized emitters showed pure red emission with PLmax of 662 nm (R-BN) and 692 nm (R-TBN) with FWHM of 38 nm in the toluene solution. Consequently, both emitters showed high PLQY of unity, with small ∆EST values of 0.18 eV for R-BN and 0.16 eV for R-TBN. By considering the long-delayed decay lifetimes of both emitters, the OLEDs were fabricated by adopting the emissive layer of the ternary system. The EML contained CBP: 30 wt% Ir(mphmq)2 tmd: 3 wt% R-BN/R-TBN, where CBP as host and Ir(mphmq)2 tmd were used as the phosphorescence sensitizer to assist the exciton in recycling under electrical excitation. Consequently, the OLED showed ELmax of 664 nm (R-BN) and 686 nm (R-TBN) with small FWHMs of 48 and 49 nm, respectively. The corresponding CIE coordinates of (0.719, 0.280) and (0.721, 0.278) were observed for R-BN and R-TBN, respectively, indicating their potentiality as deep red emitters. Notably, both the emitters showed maximum EQE of 28.1 and 27.6% for R-BN and R-TBN, respectively. The OLED lifetime (LT90) was manifested at 125 h and 151 h, respectively, under an initial luminance of 2000 cdm−2. Even though these emitters showed good EQE and reasonable lifetime, their emission falls under the deep red region, which deviates from the pure red color requirements given by BT2020 and NTSE standards.
Very recently, Chuluo yang et al. developed a new molecular design strategy by using the weak donating ability of oxygen atoms at para each other to blue shift the prior R-BN designs (Fig. 5). So by considering the oxygen replacement effect, the para-boron/nitrogen fusing, the designed emitters (BNO1-BNO3) can fall in the pure red color region58. Furthermore, this design concept improves ICT characteristics by possessing para N–π–N, O–π–O, and B–π–B pairs. All three emitters were synthesized in three steps. The first two steps involve nucleophilic aromatic substitutions using carbazole and phenolic derivatives. The third and final step involves the n-butyl lithium-mediated borylation reaction using the BBr3 and Hunig base. Finally, all three emitters gave a reasonable synthetic yield of over 30%, indicating that these materials can be easily scalable for commercial applications. Furthermore, these materials have high decomposition temperatures (Td, corresponding to 5% weight loss) over 500 °C, indicating their tremendous thermal stability. All three emitters showed the PLmax of 605–616 nm with the FWHM below 33 nm in toluene solution. The emission red-shifted from BNO1 to BNO3 due to the extensions of indeno and phenoxy peripheries. Notably, moderate ΔESTs of 0.25–0.27 eV were determined based on their fluorescence and phosphorescent spectra. Precedently, all three emitters are highly anisotropic due to their quasi-planar molecular shape. This led to getting a high horizontal molecular ratio of ~86%. Consequently, all three emitters showed high PLQY of over 95% due to their strong MR effect with rigid molecular structure. Further, the phosphor sensitized OLEDs were fabricated with the EML of 1–3 wt% of emitters and 20 wt% of PO-01 in the DMIC-TRZ host. Among all materials, the BNO3 manifested tremendous performances as it exhibited EQEmax of 36.1% and it maintained a very high EQE of 28.6% at 10000 cd/m2. Importantly, all the materials exhibited pure-red emission with CIE x ~0.64–0.67. Further, BNO1 showed decent operational stability with LT90 of 49.8 h. This design concept clearly shows that incorporating heteroatoms in rigid molecular structures can lead to ultralow efficiency roll-off, ultrahigh brightness, high color purity, and good device lifetime.
To extend the red DB-MR-TADF emitters, recently, L. Wang et al. developed two emitters, namely, DBNS and DBNS-tBu81. The design is based on utilizing the sulfur atoms instead of oxygen atoms in the BNO1 core. The synthesis followed the same BNO1 emitter, but thiophenol was used instead of phenol groups. The final emitters have resulted in reasonable synthetic yields. It is noted that the sulfur atoms showed higher HOMO contribution than nitrogen atoms, so that RISC can be improved. The DBNS showed the PLmax of 631 nm, whereas DBNS-tBu showed 641 nm. The 10 nm redshifted for DBNS-tBu is due to the incorporation of tert-butyl groups. Consequently, both the emitters exhibited narrow FWHM of ~40 nm with a high PLQY of ~85%. The FWHM is increased compared to oxygen-bridged type BNO1 due to the twisted geometry of DBNS and a heavy sulfur atom. Precedently, the heavy atom helped to get the high RISC rate of ~2.2 × 105 s−1 for both the emitters. Even though the emitters revealed twisted geometries, the trigonal planarity of the overall core leads to aggregation-induced emission in DBNS. In contrast, when tert-butyl groups are incorporated, AIE slightly alleviates and maintains the narrow FWHM. The solution-processed OLED was fabricated by adopting the EML with a ternary system of H2: 10 wt% R-D2: 1–3 wt% DBNS or DBNS-tBu. Among both emitters, the DBNS-tBu revealed a high EQE of 7.8% with an ELmax of 616 nm. The EL emission is blue-shifted compared to PL emission due to higher S1 energy levels in the H2 host matrix82 than in dichloromethane solution. However, from this design, it is understood that the heavy atoms, especially sulfur, allow increasing the TADF mechanism with the high RISC rate constant values. The detailed photophysical and OLED performances were depicted in Tables 1 and 2.
Overall synthetic aspects for borylation
There are two types mainly utilized for the synthesis of the DB-MR-TADF emitters. These are (i) BuLi-based tandem borylation using Hunig base; (ii) One shot double borylation by using BBr3/BI3 and reducing aromatic solvents49,83,84,85,86,87,88,89,90. In type-1, under the inert atmosphere in the reducing solvents, the halogen will be replaced by using lithiation, and then transmetalation was done by using BBr3 with the temperature controls90,91,92,93. And then finally, the tandem bora Friedel-craft reactions using the Hunig base. Whereas in the case of Type-2, the boron cyclization was done by one shot using the BBr3/BI3 with the support of aromatic solvents like toluene, chlorobenzene, o-dichlorobenzene, and 1,2,4-trichlorobenzene93,94,95,96. Both types allow getting the C-B formations. The conceptual insights of both synthetic aspects are provided in Fig. 6.
Summary and outlook
Neoteric developments strongly reveal that constructing high-performance OLEDs with high energy conversion efficiency comparable to phosphorescent (metal-based) counterparts by using purely organic semiconductors is feasible. A variety of strictly organic emitters based on enormous building blocks has already been confirmed with the capacity to make highly efficient OLEDs. Among them, the TADF materials were efficient as they could achieve 100% IQE. However, due to the vibrational spectrum broadening, a new era of MR-TADF materials is blooming in the current OLED field research. This review discusses the effect of two boron atoms and the summarized progress of double boron-embedded multi-resonant TADF emitters based in all color regions. We mainly focus on how to design the materials with valuable conceptual insights and good synthetic processes.
In the case of blue color, the ν-DABNA type emitters showed tremendous performances as it involves the meta B-π-B/N-π-N combinations at a central electron-rich phenyl ring. The performances such as narrow FWHM (~15 nm), high PLQY, and high RISC have succeeded already. The color point of view in the blue region is resolved already with proper design concepts and high EL performances as they also show EQEmax of ~35%. However, the lifetime for blue materials has still lacking in consideration for future developments. Meanwhile, in the case of the green region, the ν-DABNA-CN-Me showed outstanding performance as it showed good color purity (FWHM 23 nm) compared to previous designs. The alternative way to design the efficient green DB-MR-TADF is by combining para B-π-B and O-π-O. The ν-DABNA-CN-Me utilized the same meta combination of B/N only like blue emitter ν-DABNA. Still, the CN group incorporated para position to boron, which affected the LUMO and showed green emission with good RISC improvements. However, green MR-TADF emitters require still more development focusing on pure color and even good EL characteristics. To design the red DB-MR-TADF emitters, the central phenyl ring should be surrounded by para B-π-B, N-π-N, and O-π-O each other. The emitter BNO1 recently showed good red emission performances. However, the FWHM can be reduced (below 30 nm) in the coming days by considering the other design concepts as well. Overall, even from a synthetic point of view in DB-MR-TADF designs, both halogen included /halogen-free already have proper design analysis for developing the efficient and high color purity DB-MR-TADF emitters in all regions. So maybe in future days, utilizing these DB-MR-TADF emitters, highly efficient stable devices can be developed with proper device concepts. Hyperfluorescence (HF) has been a keen technology in recent years, so by developing highly efficient stable emitters, the stable HF-OLED can be retained for future display applications, satisfying commercial TV standards. We believe this review article can guide the pathways for designing efficient and stable MR-TADF emitters with high color purity for futuristic developments in OLED materials research.
Uoyama, H., Goushi, K., Shizu, K., Nomura, H. & Adachi, C. Highly efficient organic light-emitting diodes from delayed fluorescence. Nature 492, 234–238 (2012).
Lim, H. et al. Highly efficient deep-blue OLEDs using a TADF emitter with a narrow emission spectrum and high horizontal emitting dipole ratio. Adv. Mater. 32, 2004083 (2020).
Lee, Y. H. et al. High-efficiency sky blue to ultradeep blue thermally activated delayed fluorescent diodes based on ortho-carbazole-appended triarylboron emitters: above 32% external quantum efficiency in blue devices. Adv. Optical Mater. 6, 1800385 (2018).
Chen, Y.-K. et al. Triarylamine-pyridine-carbonitriles for organic light-emitting devices with EQE nearly 40%. Adv. Mater. 33, 2008032 (2021).
Wada, Y., Kubo, S. & Kaji, H. Adamantyl substitution strategy for realizing solution-processable thermally stable deep-blue thermally activated delayed fluorescence materials. Adv. Mater. 30, 1705641 (2018).
Shin, H. et al. Controlling horizontal dipole orientation and emission spectrum of IR complexes by chemical design of ancillary ligands for efficient deep-blue organic light-emitting diodes. Adv. Mater. 31, 1808102 (2019).
Zhang, D. et al. Efficient and stable deep-blue fluorescent organic light-emitting diodes employing a sensitizer with fast triplet upconversion. Adv. Mater. 32, 1908355 (2020).
Nam, S. et al. Improved efficiency and lifetime of deep-blue hyperfluorescent organic light-emitting diode using Pt(II) complex as phosphorescent sensitizer. Adv. Sci. 8, 2100586 (2021).
Hong, G. et al. A brief history of OLEDs—emitter development and industry milestones. Adv. Mater. 33, 2005630 (2021).
Vasilopoulou, M. et al. Advances in solution-processed near-infrared light-emitting diodes. Nat. Photonics 15, 656–669 (2021).
Nakanotani, H. et al. High-efficiency organic light-emitting diodes with fluorescent emitters. Nat. Commun. 5, 4016 (2014).
Kaji, H. et al. Purely organic electroluminescent material realizing 100% conversion from electricity to light. Nat. Commun. 6, 8476 (2015).
Tao, Y. et al. Thermally activated delayed fluorescence materials towards the breakthrough of organoelectronics. Adv. Mater. 26, 7931–7958 (2014).
Wong, M. Y. & Zysman-Colman, E. Purely organic thermally activated delayed fluorescence materials for organic light-emitting diodes. Adv. Mater. 29, 1605444 (2017).
Tanaka, H., Shizu, K., Nakanotani, H. & Adachi, C. Twisted intramolecular charge transfer state for long-wavelength thermally activated delayed fluorescence. Chem. Mater. 25, 3766–3771 (2013).
Yang, Z. et al. Recent advances in organic thermally activated delayed fluorescence materials. Chem. Soc. Rev. 46, 915–1016 (2017).
Jankus, V., Chiang, C.-J., Dias, F. & Monkman, A. P. Deep blue exciplex organic light-emitting diodes with enhanced efficiency; P-type or E-type triplet conversion to singlet excitons? Adv. Mater. 25, 1455–1459 (2013).
Penfold, T. J., Gindensperger, E., Daniel, C. & Marian, C. M. Spin-vibronic mechanism for intersystem crossing. Chem. Rev. 118, 6975–7025 (2018).
Lee, S. Y., Adachi, C. & Yasuda, T. High-efficiency blue organic light-emitting diodes based on thermally activated delayed fluorescence from phenoxaphosphine and phenoxathiin derivatives. Adv. Mater. 28, 4626–4631 (2016).
Naveen, K. R. et al. Achieving high efficiency and pure blue color in hyperfluorescence organic light emitting diodes using organo-boron based emitters. Adv. Funct. Mater. 32, 2110356 (2022).
Xu, Y., Xu, P., Hu, D. & Ma, Y. Recent progress in hot exciton materials for organic light-emitting diodes. Chem. Soc. Rev. 50, 1030–1069 (2021).
Penfold, T. J., Dias, F. B. & Monkman, A. P. The theory of thermally activated delayed fluorescence for organic light emitting diodes. Chem. Commun. 54, 3926–3935 (2018).
Guo, J. et al. Robust luminescent materials with prominent aggregation-induced emission and thermally activated delayed fluorescence for high-performance organic light-emitting diodes. Chem. Mater. 29, 3623–3631 (2017).
Chen, J.-X. et al. Red organic light-emitting diode with external quantum efficiency beyond 20% based on a novel thermally activated delayed fluorescence emitter. Adv. Sci. 5, 1800436 (2018).
Wada, Y., Nakagawa, H., Matsumoto, S., Wakisaka, Y. & Kaji, H. Organic light emitters exhibiting very fast reverse intersystem crossing. Nat. Photonics 14, 643–649 (2020).
Hosokai, T, et al. Evidence and mechanism of efficient thermally activated delayed fluorescence promoted by delocalized excited states. Sci. Adv. 3: e1603282 (2017).
Chen, X.-K. et al. A new design strategy for efficient thermally activated delayed fluorescence organic emitters: from twisted to planar structures. Adv. Mater. 29, 1702767 (2017).
Chen, Y. et al. Approaching nearly 40% external quantum efficiency in organic light emitting diodes utilizing a green thermally activated delayed fluorescence emitter with an extended linear donor–acceptor–donor structure. Adv. Mater. n/a, 2103293 (2021).
Etherington, M. K., Gibson, J., Higginbotham, H. F., Penfold, T. J. & Monkman, A. P. Revealing the spin–vibronic coupling mechanism of thermally activated delayed fluorescence. Nat. Commun. 7, 13680 (2016).
Braveenth, R. et al. Achieving narrow FWHM and high EQE over 38% in blue OLEDs using rigid heteroatom-based deep blue TADF sensitized host. Adv. Funct. Mater. n/a, 2105805 (2021).
Broadbent, A. D. A critical review of the development of the CIE1931 RGB color-matching functions. Color Res. Appl. 29, 267–272 (2004).
Ye, Y., He, Y. & Xiu, X. Manipulating ultra-high definition video traffic. IEEE Multimed. 22, 73–81 (2015).
Ha, J. M., Hur, S. H., Pathak, A., Jeong, J.-E. & Woo, H. Y. Recent advances in organic luminescent materials with narrowband emission. NPG Asia Mater. 13, 53 (2021).
Lee, H., Karthik, D., Lampande, R., Ryu, J. H. & Kwon, J. H. Recent advancement in boron-based efficient and pure blue thermally activated delayed fluorescence materials for organic light-emitting diodes. Front. Chem. 8, 373 (2020).
Rayappa Naveen, K., Prabhu, Cp. K., Braveenth, R. & Hyuk Kwon, J. Molecular design strategy for orange red thermally activated delayed fluorescence emitters in organic light-emitting diodes (OLEDs). Chem. Eur. J. 28, e202103532 (2022).
Hatakeyama, T. et al. Ultrapure blue thermally activated delayed fluorescence molecules: efficient HOMO–LUMO separation by the multiple resonance effect. Adv. Mater. 28, 2777–2781 (2016).
Chen, D. et al. Non-noble-metal-based organic emitters for OLED applications. Mater. Sci. Eng. R Rep. 142, 100581 (2020).
Han, J., Chen, Y., Li, N., Huang, Z. & Yang, C. Versatile boron-based thermally activated delayed fluorescence materials for organic light-emitting diodes. Aggregate n/a, e182 (2022).
Madayanad Suresh, S., Hall, D., Beljonne, D., Olivier, Y. & Zysman-Colman, E. Multiresonant thermally activated delayed fluorescence emitters based on heteroatom-doped nanographenes: recent advances and prospects for organic light-emitting diodes. Adv. Funct. Mater. 30, 1908677 (2020).
Shizu, K. & Kaji, H. Comprehensive understanding of multiple resonance thermally activated delayed fluorescence through quantum chemistry calculations. Commun. Chem. 5, 53 (2022).
Zhang, Y. et al. Achieving pure green electroluminescence with CIEy of 0.69 and EQE of 28.2% from an Aza-fused multi-resonance emitter. Angew. Chem. Int Ed. 59, 17499–17503 (2020).
Xue, W. et al. Identifying the molecular origins of green BN-TADF material degradation and device stability via in situ Raman spectroscopy. Chem. Eur. J. 28, e202201006 (2022).
Konidena, R. K. & Naveen, K. R. Boron-based narrowband multiresonance delayed fluorescent emitters for organic light-emitting diodes. Adv. Photonics Res. n/a, 2200201 (2022).
Kim, H. J. & Yasuda, T. Narrowband emissive thermally activated delayed fluorescence materials. Adv. Optical Mater. n/a, 2201714 (2022).
Yan, C.-C., Wang, X.-D. & Liao, L.-S. Thermally activated delayed fluorescent gain materials: harvesting triplet excitons for lasing. Adv. Sci. 9, 2200525 (2022).
Xu, Y., Wang, Q., Cai, X., Li, C. & Wang, Y. Highly efficient electroluminescence from narrowband green circularly polarized multiple resonance thermally activated delayed fluorescence enantiomers. Adv. Mater. 33, 2100652 (2021).
Xu, Y. et al. Highly efficient electroluminescent materials with high color purity based on strong acceptor attachment onto B–N-containing multiple resonance frameworks. CCS Chem. 4, 2065–2079 (2021).
Xu, Y. et al. Constructing charge-transfer excited states based on frontier molecular orbital engineering: narrowband green electroluminescence with high color purity and efficiency. Angew. Chem. Int. Ed. 59, 17442–17446 (2020).
Oda, S. et al. Carbazole-based DABNA analogues as highly efficient thermally activated delayed fluorescence materials for narrowband organic light-emitting diodes. Angew. Chem. Int. Ed. 60, 2882–2886 (2021).
Liu, Y., Xiao, X., Ran, Y., Bin, Z. & You, J. Molecular design of thermally activated delayed fluorescent emitters for narrowband orange–red OLEDs boosted by a cyano-functionalization strategy. Chem. Sci. 12, 9408–9412 (2021).
Naveen, K. R., Hwang, S. J., Lee, H. & Kwon, J. H. Narrow band red emission fluorophore with reasonable multiple resonance effect. Adv. Electron. Mater. 8, 2101114 (2022).
Cho, S. M. et al. Anthracene-dibenzofuran based electron transport type hosts for long lifetime multiple resonance pure blue OLEDs. Org. Electron 105, 106501 (2022).
Xu, Y. et al. Molecular-structure and device-configuration optimizations toward highly efficient green electroluminescence with narrowband emission and high color purity. Adv. Optical Mater. 8, 1902142 (2020).
Zhang, Y. et al. Multi-resonance induced thermally activated delayed fluorophores for narrowband green OLEDs. Angew. Chem. Int. Ed. 58, 16912–16917 (2019).
Li, D., Zhang, H. & Wang, Y. Four-coordinate organoboron compounds for organic light-emitting diodes (OLEDs). Chem. Soc. Rev. 42, 8416–8433 (2013).
Kondo, Y. et al. Narrowband deep-blue organic light-emitting diode featuring an organoboron-based emitter. Nat. Photonics 13, 678–682 (2019).
Oda, S. et al. Development of pure green thermally activated delayed fluorescence material by cyano substitution. Adv. Mater. 34, 2201778 (2022).
Zou, Y. et al. High-performance narrowband pure-red OLEDs with external quantum efficiencies up to 36.1% and ultralow efficiency roll-off. Adv. Mater. 34, 2201442 (2022).
Oda, S., Kawakami, B., Kawasumi, R., Okita, R. & Hatakeyama, T. Multiple resonance effect-induced sky-blue thermally activated delayed fluorescence with a narrow emission band. Org. Lett. 21, 9311–9314 (2019).
Knöller, J. A. et al. Intramolecular borylation via sequential B−mes bond cleavage for the divergent synthesis of B,N,B-doped benzohelicenes. Angew. Chem. Int. Ed. 59, 3156–3160 (2020).
Matsui, K. et al. One-shot multiple borylation toward BN-doped nanographenes. J. Am. Chem. Soc. 140, 1195–1198 (2018).
Tanaka, H. et al. Hypsochromic shift of multiple-resonance-induced thermally activated delayed fluorescence by oxygen atom incorporation. Angew. Chem. Int. Ed. 60, 17910–17914 (2021).
Park, I. S., Yang, M., Shibata, H., Amanokura, N. & Yasuda, T. Achieving ultimate narrowband and ultrapure blue organic light-emitting diodes based on polycyclo-heteraborin multi-resonance delayed-fluorescence emitters. Adv. Mater. 34, 2107951 (2022).
Rayappa Naveen, K. et al. Deep blue diboron embedded multi-resonance thermally activated delayed fluorescence emitters for narrowband organic light emitting diodes. Chem. Eng. J. 432, 134381 (2022).
Naveen, K. R. et al. Modular design for constructing narrowband deep-blue multiresonant thermally activated delayed fluorescent emitters for efficient organic light emitting diodes. Chem. Eng. J. 451, 138498 (2023).
Ahn, D. H. et al. Rigid oxygen-bridged boron-based blue thermally activated delayed fluorescence emitter for organic light-emitting diode: approach towards satisfying high efficiency and long lifetime together. Adv. Optical Mater. 8, 2000102 (2020).
Ahn, D. H. et al. Highly efficient blue thermally activated delayed fluorescence emitters based on symmetrical and rigid oxygen-bridged boron acceptors. Nat. Photonics 13, 540–546 (2019).
Karthik, D. et al. Acceptor–donor–acceptor-type orange–red thermally activated delayed fluorescence materials realizing external quantum efficiency over 30% with low efficiency roll-off. Adv. Mater. 33, 2007724 (2021).
Karthik, D. et al. Highly efficient blue thermally activated delayed fluorescence organic light emitting diodes based on tercarbazole donor and boron acceptor dyads. J. Mater. Chem. C. 8, 2272–2279 (2020).
Wang, Y. et al. A periphery cladding strategy to improve the performance of narrowband emitters, achieving deep-blue OLEDs with CIEy <0.08 and external quantum efficiency approaching 20%. Org. Electron 97, 106275 (2021).
Lv, X. et al. Extending the π-skeleton of multi-resonance TADF materials towards high-efficiency narrowband deep-blue emission. Angew. Chem. Int Ed. 61, e202201588 (2022).
Nagata, M. et al. Fused-nonacyclic multi-resonance delayed fluorescence emitter based on ladder-thiaborin exhibiting narrowband sky-blue emission with accelerated reverse intersystem crossing. Angew. Chem. Int. Ed. 60, 20280–20285 (2021).
Chan, C-Y, et al. Two boron atoms versus one: high-performance deep-blue multi-resonance thermally activated delayed fluorescence emitters. Chem. Commun. (2022).
Liu, G., Sasabe, H., Kumada, K., Arai, H. & Kido, J. Nonbonding/bonding molecular orbital regulation of nitrogen-boron-oxygen-embedded blue/green multiresonant TADF emitters with high efficiency and color purity. Chem. Eur. J. 28, e202201605 (2022).
Hirai, H. et al. One-step borylation of 1,3-diaryloxybenzenes towards efficient materials for organic light-emitting diodes. Angew. Chem. Int Ed. 54, 13581–13585 (2015).
Ikeda, N. et al. Solution-processable pure green thermally activated delayed fluorescence emitter based on the multiple resonance effect. Adv. Mater. 32, 2004072 (2020).
Luo, X.-F. et al. High-efficiency and narrowband OLEDs from blue to yellow with ternary boron/nitrogen-based polycyclic heteroaromatic emitters. Adv. Optical Mater. n/a, 2200504 (2022).
Cai, X. et al. Achieving 37.1% green electroluminescent efficiency and 0.09 eV full width at half maximum based on a ternary boron-oxygen-nitrogen embedded polycyclic aromatic system. Angew. Chem. Int. Ed. 61, e202200337 (2022).
Yang, M., Park, I. S. & Yasuda, T. Full-color, narrowband, and high-efficiency electroluminescence from boron and carbazole embedded polycyclic heteroaromatics. J. Am. Chem. Soc. 142, 19468–19472 (2020).
Zhang, Y. et al. Multi-resonance deep-red emitters with shallow potential-energy surfaces to surpass energy-gap law**.Angew. Chem. Int. Ed. 60, 20498–20503 (2021).
Wang, Y. et al. Boron-, sulfur- and nitrogen-doped tridecacyclic aromatic emitters with multiple resonance effect for narrowband red emission. Chin. J. Chem. 40, 2671–2677 (2022).
Ding, J. et al. Solution-processable carbazole-based conjugated dendritic hosts for power-efficient blue-electrophosphorescent devices. Adv. Mater. 21, 4983–4986 (2009).
Oda, S. & Hatakeyama, T. Development of one-shot/one-pot borylation reactions toward organoboron-based materials. Bull. Chem. Soc. Jpn 94, 950–960 (2020).
Sakai, M., Mori, M., Hirai, M., Ando, N. & Yamaguchi, S. Planarized phenyldithienylboranes: effects of the bridging moieties and π-extension on the photophysical properties and lewis acidity. Chem. – A Eur. J. 28, e202200728 (2022).
Jiang, L. et al. Access to tetracoordinate boron-doped polycyclic aromatic hydrocarbons with delayed fluorescence and aggregation-induced emission under mild conditions. Chem. Sci. 13, 5597–5605 (2022).
Nakatsuka, S., Gotoh, H., Kinoshita, K., Yasuda, N. & Hatakeyama, T. Divergent synthesis of heteroatom-centered 4,8,12-triazatriangulenes. Angew. Chem. Int. Ed. 56, 5087–5090 (2017).
Suresh, S. M. et al. A deep blue B,N-doped heptacene emitter that shows both thermally activated delayed fluorescence and delayed fluorescence by triplet–triplet annihilation. J. Am. Chem. Soc. 142, 6588–6599 (2020).
Stavrou, K. et al. Emission and absorption tuning in TADF B,N-doped heptacenes: toward ideal-blue hyperfluorescent OLEDs. Adv. Optical Mater. n/a, 2200688 (2022).
Miyamoto, F., Nakatsuka, S., Yamada, K., Nakayama, K-i. & Hatakeyama, T. Synthesis of boron-doped polycyclic aromatic hydrocarbons by tandem intramolecular electrophilic arene borylation. Org. Lett. 17, 6158–6161 (2015).
Narita, H. et al. Fully fused boron-doped polycyclic aromatic hydrocarbons: their synthesis, structure–property relationships, and self-assembly behavior in aqueous media. Chem. Sci. 13, 1484–1491 (2022).
Shoji, Y., Kashida, J. & Fukushima, T. Bringing out the potential of organoboron compounds by designing the chemical bonds and spaces around boron. Chem. Commun. 58, 4420–4434 (2022).
Wu, X. et al. The role of host–guest interactions in organic emitters employing MR-TADF. Nat. Photonics 15, 780–786 (2021).
Park, J. et al. Asymmetric blue multiresonance TADF emitters with a narrow emission band. ACS Appl. Mater. Interfaces 13, 45798–45805 (2021).
Oda, S. et al. One-shot synthesis of expanded heterohelicene exhibiting narrowband thermally activated delayed fluorescence. J. Am. Chem. Soc. 144, 106–112 (2022).
Chen, C., Du, C.-Z. & Wang, X.-Y. The rise of 1,4-BN-heteroarenes: synthesis, properties, and applications. Adv. Sci. 9, 2200707 (2022).
Qiu, Y. et al. Narrowing the electroluminescence spectra of multiresonance emitters for high-performance blue OLEDs by a peripheral decoration strategy. ACS Appl. Mater. Interfaces 13, 59035–59042 (2021).
This work was supported by the Technology Innovation Program (20006464, Development of TADF sensitized fluorescence RGB emitting layer materials with high color purity and high efficiency for BT 2020) funded by the Ministry of Trade, Industry & Energy (MOTIE, Korea).
The authors declare no competing interests.
Peer review information
Communications Chemistry thanks Hironori Kaji and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Naveen, K.R., Yang, H.I. & Kwon, J.H. Double boron-embedded multiresonant thermally activated delayed fluorescent materials for organic light-emitting diodes. Commun Chem 5, 149 (2022). https://doi.org/10.1038/s42004-022-00766-5