Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Imaging grain boundaries in a two-dimensional polymer

Organic materials are highly sensitive to electron beam irradiation and thus easily damaged upon imaging by electron microscopy. Now, low-dose aberration-corrected high resolution transmission electron microscopy allows for less invasive near-atomic-scale imaging of a two-dimensional polymer.

Synthetic two-dimensional polymers have shown promise for a variety of applications. However, little is understood about the grain boundaries present within these materials, which may play important roles in dictating their properties. Now, an international team led by Ute Kaiser and Haoyuan Qi from Universität Ulm, and Xinliang Feng and Thomas Heine from Technische Universität Dresden achieve near-atomic-scale visualization of the grain boundaries in a layer-stacked 2D polyimine using aberration-corrected high-resolution transmission electron microscopy (AC-HRTEM) (

Two-dimensional materials are prone to structural disintegration upon irradiation with an electron beam. Their high-resolution imaging has thus proven to be a challenging goal for electron microscopists over recent years. “From our experience with inorganic 2D materials, we have gained valuable insights into damage mechanisms, and developed methodologies to significantly reduce electron radiation damage”, says Kaiser. “However, compared to beam-sensitive inorganic materials such as graphene and transition metal dichalcogenides, the susceptibility of 2D polymers towards electron radiation is several orders of magnitude higher. Therefore, TEM imaging of 2D polymers—even just seeing the lattice fringes—seemed to be a formidable task”, she explains.

Nonetheless, by balancing the electron dose and the image contrast, the team successfully determined an experimental procedure for AC-HRTEM that allows for direct grain boundary observation in a 2D polymer with a resolution of 2.3 Å. Porphyrin nodes can be distinguished from terephthalaldehyde linkers in both the pristine 2D network and at defect sites. The researchers identified a number of distinct grain boundary types, including antiphase boundaries as well as low-angle and high-angle grain boundaries (Fig. 1). Antiphase boundaries are proposed to result from self-corrections applied to missing-linker and missing-node errors that occur during polymerization, while low-angle and high-angle grain boundaries are attributed to the coalescence of stochastically oriented grains during crystal growth.

Fig. 1: Grain boundaries in a 2D polyimine identified from aberration-corrected high-resolution transmission electron microscopy.

a An antiphase boundary; the blue line follows the boundary. b A low-angle grain boundary with a misorientation of 10 degrees; dislocations are marked in blue. c A high-angle grain boundary with a misorientation of 28 degrees; the red arrow marks a porphyrin termination and the blue arrow marks a terephthalaldehyde termination. Scale bars: 10 nm. Adapted from Sci. Adv., 6, 33, eabb5976 (2020) DOI: 10.1126/sciadv.abb5976.

“Without direct observation, one could speculate that all grain boundaries, regardless of whether in organic or inorganic materials, should always look the same. But based on our observations, we can say with certainty that they are not”, comments Kaiser. While inorganic 2D materials display high-energy point defects at their grain boundaries, both experiment and theory demonstrate that the crystalline domains of these 2D polymers tend to be connected via flexible covalent bonds. This may suggest a higher degree of local robustness in comparison to inorganic materials.

‘All these details could offer a realistic starting point for further theoretical modelling and experimental endeavors, such that the structure—property correlation in 2D polymers can be better understood’, concludes Kaiser. The team’s next goal is to achieve atomic resolution, which they hope would allow them to identify different functional groups and to observe the chemical environment in the network’s pores.


  1. 1.

    Kaiser, U. et al. Near–atomic-scale observation of grain boundaries in a layer-stacked two-dimensional polymer. Sci. Adv. 6, eabb5976 (2020).

    Article  Google Scholar 

Download references

Author information



Corresponding author

Correspondence to Victoria Richards.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Richards, V. Imaging grain boundaries in a two-dimensional polymer. Commun Chem 3, 136 (2020).

Download citation


Quick links