Effective colonization of host cells by some Gram-positive bacteria often involves using lengthy, adhesive macromolecular structures called sortase-dependent pili. Among commensals, the gut-adapted Lactobacillus rhamnosus GG strain encodes the operons for two varieties of these pili (SpaCBA and SpaFED), with each structure consisting of backbone, tip, and basal pilin subunits. Although the tertiary structure was recently solved for the backbone subunit (SpaA) of the SpaCBA pilus, no structural information exists for its counterpart in the SpaFED pilus. Here, we report several crystal structures for the SpaD backbone pilin, two of which capture the N-terminal domain in either the closed (linear) or open (bent) conformation. To our knowledge, this is the first observation of the bent conformation in Gram-positive pilin structures. Based on this bent conformation, we suggest a three-stage model, which we call the expose-ligate-seal mechanism, for the docking and assembly of backbone pilins into the sortase-dependent pilus.
A key contributing factor of bacterial survival is the ability to colonize a host effectively. Among the tools used by bacteria for host-colonization are the easily-recognizable multi-subunit pili1,2. These pilus structures are lengthy and limb-like, and often have an adhesive character that fastens readily to cellular surfaces. Moreover, as a direct result of their long and extended peripheral reach, pili facilitate the first interactive contact that some bacteria have with the immediate environment. Although surface pili are not a universal trait of all bacteria, Gram-negative bacteria contain at least five types: chaperone-usher pili; type IV pili; conjugative type IV secretion pili; curli fibers; and type V pili3,4. In contrast, only two types are known to exist in Gram-positive bacteria: type IV pili3,5 and sortase-dependent pili6. The presence of sortase-dependent pili was first established among pathogenic species6,7,8, but more recently this form of piliation has been identified in gut commensals9,10,11. Since sortase-dependent pili are known to adhere to epithelial extracellular matrix proteins and mucus, this enables them to have an important role during host cell colonization as mechanisms of pathogenic virulence and non-pathogenic niche adaptation6,12,13,14.
The sortase-dependent pilus structure is usually built from three types of pilin subunits, each with a defined location and purpose. So-called major pilins polymerize head-to-tail into the pilus backbone, with ancillary pilins added at the tip (adhesin) and base (anchor). Typically, these backbone, tip, and basal subunits are held together by covalent bonds catalyzed by a pilin-specific C-type sortase enzyme. According to prevailing models15, pilus assembly begins when the sortase severs the threonine-glycine bond within the C-terminal LPXTG sorting motif of a tip pilin. This allows the freed threonine to form an isopeptide bond with the lysine of the YPKN pilin motif in the N-terminal domain of a backbone subunit. This process continues with a succession of backbone pilins, until the pilus structure reaches an adequate length, at which point further polymerization is halted. The arrival of a basal pilin attached to the housekeeping A-type sortase is the signal that initiates termination and anchoring activities16, whereby a C-type sortase catalyzes an isopeptide bond between the basal subunit and the backbone pilin most recently added17,18. The fully assembled pilus (carried by the A-type sortase) is then anchored to the bacterial cell wall when the LPXTG-motif threonine of the basal pilin covalently attaches to the peptidoglycan layer17,18. The genes for the backbone, tip, and basal pilins and the C-type sortase are encoded as a pilus operon in the genome, facilitating the coordinated expression of the various proteins involved19.
Based on their tertiary structures, backbone, tip, and basal pilins share a common structural topology20,21,22 by being comprised of the CnaA and CnaB domains. Both domains are variants of the immunoglobulin (Ig)-like domain fold that was first established in the staphylococcal collagen adhesin (Cna) protein23,24,25. The topological core of the CnaA and CnaB domains consists of nine and seven β-strands, respectively, and are distinguished by interspersed regions of loops, α-helices, β-strands, and additional domains. In the CnaA and CnaB domains, an autocatalytic internal isopeptide bond can occur between either lysine and aspartate (K–D) or lysine and asparagine (K–N), thus bolstering the structural rigidity of the pilin26,27. Most solved structures of the three pilin types are for those that comprise the pilus backbone21. Backbone pilins27,28,29,30,31,32,33,34,35,36,37,38,39,40,41 consist of between two to four of the CnaA and CnaB domains21, though the domain at the N-terminal region has some unique properties worth studying.
Recently, we reported the X-ray structural determination of double-domained SpaA, the backbone pilin from the Lactobacillus rhamnosus GG strain29. L. rhamnosus GG is a gut-adapted lactic acid bacterium best known for its advocated use as a probiotic42, but also for being identified as the first Gram-positive commensal capable of producing sortase-dependent pili (called SpaCBA)9. The SpaCBA pilus, which is encoded by the spaCBA operon and consists of the tip SpaC, basal SpaB, and backbone SpaA pilins, has undergone extensive functional and structural characterization over the past few years, and stems from a strong curiosity in unraveling the molecular aspects of L. rhamnosus GG gut ecology and probiosis14. The L. rhamnosus GG genome also carries the genes for another pilus operon called spaFED9. However, unlike the genes for the L. rhamnosus GG SpaCBA pilus, those for the SpaFED pilus are constitutively inactive under testing conditions43, though their expression might still rely on an unknown stimulus or else be gut-induced in situ44. While the native form of a fully assembled SpaFED pilus has to date only been predicted in L. rhamnosus GG43, the spaFED operon represents an intact translational unit whose cloned expression can be induced in Lactococcus lactis to produce a recombinant version consisting of the tip SpaF, basal SpaE, and backbone SpaD pilins45. To address what structural similarities or differences might exist between the two L. rhamnosus GG pilus types, we sought to solve the tertiary structures of the SpaCBA and SpaFED pilus proteins through X-ray crystallography29,46,47,48. In this present study, we bring new mechanistic insights about the pilin-assembly process for sortase-dependent pili by presenting crystal structures of the SpaD backbone pilin with its N-domain in both a closed (linear) and open (bent) conformation.
Overall structure of GG-SpaD
In its unprocessed form, GG-SpaD (prefixed to avoid name overlap with Corynebacterium diphtheriae SpaD33) is a 517-residue protein (UniprotKB ID: A0A179XFF5) (Fig. 1a). To crystallize GG-SpaD, we produced a recombinant form using residues 36–48546. The tertiary organization of GG-SpaD is a tandem assembly of three Ig-like domains, wherein a middle domain (M-domain) joins together the N- and C-terminal regions (N- and C-domains) of the pilin subunit (Fig. 1a, b). The crystal structure of GG-SpaDMC, which contains just the M- and C-domains, was initially obtained at resolution 1.5 Å. The full-length structure containing all three domains was later determined from orthorhombic and hexagonal crystals, which yielded two distinct conformations, respectively, called the closed and open states (Table 1).
The N- and C-domains (residues 36–183 and 359–479, respectively) both consist of four and three-stranded β-sheets and resemble the core fold of the CnaB domain (Fig. 1c). The M-domain (residues 184–358) comprises five and four-stranded β-sheets and is similar to the CnaA-type fold (Fig. 1d). A C-terminal tail (residues 480–485) projects from the C-domain core and contains the first two residues of the LPXTG motif (Fig. 1b). In the orthorhombic crystal the three domains are arranged linearly with an elongated shape 125 Å in length. This we call GG-SpaDC for the closed conformational state. The M- and C-domains are both stabilized by an internal K–N isopeptide bond, normally found in most Gram-positive backbone pilins. The N-domain shows the atypical K–D isopeptide bond, involving the uncommon YPKD pilin motif. The two elongated molecules in the asymmetric unit are packed anti-parallel, with the three domains of each molecule covering a total surface area of 22,030 Å2. The M- and C-domain have an interface area of 567 Å2, with nine hydrogen bonds and one salt bridge. The interface area between the N- and M-domains (787 Å2) involves multiple interactions, including 14 hydrogen bonds and three salt bridges.
Main structural features of the GG-SpaD domains
In the structure of the N-domain there is clear continuous electron density between Lys45 and Asp181 within the C-terminal region of the first (A) and last (G) β-strands, which indicates the formation of an isopeptide bond in a trans configuration (Fig. 2a). Surrounding this isopeptide is a cluster of hydrophobic residues. Catalytic Glu145 from β-strand E is situated in close proximity and forms a hydrogen bond with the O moiety of the K–D isopeptide bond. Asp181 is found within the uncommon YPKD pilin motif. This motif also contains the lysine (Lys180) that is involved in intermolecular isopeptide bond formation during pilus assembly, a role we confirmed by amino-acid substitution (K180A) (Supplementary Fig. 1). The side chain of Lys180 points outward from the core of the CnaB fold into a cavity formed by the extended and hook-shaped AB loop (Fig. 2b). Residues Glu52 and Arg66 form a salt bridge between the two ends of the AB loop, and thus cover Lys180. Found diagonally opposite the isopeptide bond, on the other end of the N-domain, is the BC loop, which is formed by two short α-helices and interacts with the BC loop of the M-domain at the interface of the two domains (Fig. 1b). The FG loop is opposite the BC loop and directed away from the core fold, but also contains a short β-hairpin adjacent to the AB loop near the N-terminus.
For the M-domain, continuous electron density shows the formation of a trans isopeptide bond between Lys186 and Asn337, with a catalytic Asp242 lying nearby (Fig. 2c). A cluster of 12 hydrophobic residues surround this isopeptide bond. Functionally, the K–N isopeptide bond probably brings stability to the M-domain by covalently connecting the two β-sheets of the CnaA fold (Fig. 1d). Here, the β-sheets comprise four (A, B, E, and D) and five (D’, D”, C, F, and G) anti-parallel β-strands (Fig. 1b). The AB and EF loops in the C-terminal region of the M-domain interact with the C-domain at their interface. A pair of α-helices at the N-terminal end forms the DE loop that interacts with the BC loop of the N-domain. Two additional β-strands (D’ and D”) not part of the β-sandwich core of typical Ig-like domains are found between β-strands D and E.
In the C-domain structure, the observation of continuous electron density between Lys365 and Asn477 confirms that a cis isopeptide bond is present and located in the first (A) and last (G) β-strands of the CnaB fold (Fig. 2d). Catalytic Glu445 forms a hydrogen bond with the O moiety of the K–N isopeptide bond in a hydrophobic pocket. At the N-terminal of the C-domain, short loops (FG and DE) form an interface with the C-terminal region of the M-domain. Also found at this domain interface are two anti-parallel β-strands in the BC loop that align perpendicularly to the core fold of the C-domain (Fig. 1b). Conspicuously, residues (480–485) from part of the LPXTG sorting motif extend beyond the C-domain at the C-terminal end.
To study the effect of lysine and catalytic glutamate or aspartate on isopeptide bond formation and structural stability, alanine-substituted mutants were prepared (Supplementary Table 1). X-ray diffraction data were collected for two mutant proteins (D242A in the M-domain and K365A in the C-domain), and though no isopeptide bonds were present in each, their overall tertiary structures remain unchanged (Fig. 2e, f).
Structural conformations of the N-domain
In the hexagonal crystal structure of GG-SpaD, the N-domain is angled about 100° from the M- and C-domains. This bent shape is labeled GG-SpaDO for the open conformation (Fig. 3a), and here the N-domain no longer has an isopeptide bond. We also solved a GG-SpaD structure where only the M- and C-domains are present (GG-SpaDMC) (Fig. 3b). Found in common with the GG-SpaDC, GG-SpaDO, and GG-SpaDMC structures is that the arrangement of the M- and C-domains is linear and nearly identical, yielding a RMSD of less than 1 Å (Fig. 3c). In GG-SpaDC, the N-domain is aligned linearly with the M- and C-domains (Fig. 1b), taking on the elongated rod-like shape commonly seen in other Gram-positive backbone pilins21. Contrastingly in GG-SpaDO, the N-domain is nearly perpendicular to the two other domains and situated midway along the M-domain (Fig. 3a, c). Due to this repositioning, the overall length of the GG-SpaD pilin is shortened to 90 Å and the total surface area is reduced to 19,679 Å2. However, the overall CnaB fold of the N-domain displays no difference between the closed and open conformations, as their RMSD is less than 1 Å (Fig. 3d, e). Remarkably, the bent orientation of the N-domain has never been observed before in the crystal structures of other backbone pilins.
Compared to the interface interactions between the closed N- and M-domains, the open N-domain has lost most of these contacts. Instead, it has established a new interface with the middle and C-terminal end of the M-domain (628 Å2) that involves nine hydrogen bonds and four salt bridges. Also, the BC and EF loops of the open N-domain interact with the AB loop and core fold of the M-domain. Some regions of the open N-domain structure appear disordered, e.g., the FG loop with the short β-hairpin and the AB loop with a salt bridge (Glu52-Arg66) covering the linking Lys180 that is now exposed to solvent (Fig. 3d, e). Because Asp181 has shifted about 5 Å away from Lys45, isopeptide bond formation is no longer possible between these two residues. Instead, Lys45 forms a hydrogen bond interaction with catalytic Glu145 (Fig. 3d, e). A major structural alteration in the N-domain involves the segment of residues Tyr178 to Leu183, which includes the YPKD pilin motif and links the M-domain. This linker in GG-SpaDC forms a three-stranded β-sheet with the AB and EF loops at the interface with the M-domain. In GG-SpaDO this short β-sheet has collapsed.
Biophysical analysis of N-domain motion
To gauge whether the closed and open conformations of the N-domain exist in solution, we conducted small-angle X-ray scattering (SAXS) analysis of the GG-SpaD protein. Results from the scattering profile showed that GG-SpaD assumes an elongated shape with a radius of gyration (Rg) of 28 Å and a maximal particle dimension (D-max) of 9.23 nm (Supplementary Fig. 2, Supplementary Table 2), and thus corresponds to the closed conformation (Fig. 4a). In order to mimic the conditions used to obtain the open conformation crystal structure form, we carried out the SAXS experiment in the presence of added salt (1 M NaCl). As shown in Fig. 4b, GG-SpaD now resembles the open conformation (Rg of 25Å and D-max of 7.92 nm; Supplementary Fig. 2). SAXS models of the closed and open shapes of GG-SpaD superimpose well on those of the respective crystal structures (Supplementary Fig. 2, Supplementary Table 2). This suggests that the crystal structures of the two conformational states for GG-SpaD probably represent the native proteins in solution.
For an in silico glimpse into the possible movement of the N-domain, we used the DynDom program49 to analyze the closed and open conformation crystal structures of full-length GG-SpaD. Output from DynDom suggests a large 296-residue static domain comprising residues 184–479 with a backbone RMSD of 0.56 Å (i.e., M- and C-domains) and a smaller 145-residue mobile domain containing residues 39–183 with a RMSD of 1.53 Å (i.e., N-domain) (Supplementary Table 3). DynDom also predicted a hinge region for interdomain bending comprising residues 179 to 186, which we have identified as a linker segment between the N- and M-domains. As depicted in Fig. 5, the N-domain rotates 107° around the hinge axis passing between β-strands B and E of the M-domain adjacent to Leu183 of the linker. Further DynDom analysis indicates that N-domain movement follows a standard closure motion of 77%.
To examine the domain flexibility of GG-SpaD, molecular dynamics (MD) simulations of models for the GG-SpaDC and GG-SpaDO crystal structures were performed (Fig. 6). Values from RMSF (root mean-square fluctuation) (Fig. 6a) and B-factor (Fig. 6b) calculations indicate that, in comparison with the M- and C-domains, there is extra conformational fluctuation in the N-domain. Also, the degree of structural flexibility for the N-domain is greater in GG-SpaDO than in GG-SpaDC. Moreover, the AB loop in the N-domain that showed maximum flexibility now appears to be stabilized upon becoming liganded to the C-terminal tail of an adjacent subunit, such as seen in the crystal packing (Fig. 6c, d).
Structural implications for SpaFED pilus assembly
The two GG-SpaD molecules in the asymmetric unit for the closed conformational state are stacked linearly head-to-tail, with the C-domain (tail) of one GG-SpaD subunit docked into a groove-like hydrophobic opening in the N-domain (head) of the neighboring subunit (Fig. 7a). Also located in the groove of the N-domain is the linking lysine (Lys180), which lies within covalent bonding distance of the C-terminal LPXTG-motif threonine (Thr487) in another pilin subunit (Fig. 7a, b). The interface between the C- and N-terminal regions of adjacent GG-SpaD subunits encompasses a surface area of ~765 Å2, with eight hydrogen bonds and two salt bridges (Supplementary Table 4). Three sides of the cavity for docking the C-terminal tail are built from the last two β-strands along the side of the β-sandwich between the FG and EF loops, and the lengthy AB and BC loops. The crystal packing of the open conformation revealed that the single GG-SpaD molecule in the asymmetric unit lacks a linear pilus-like structure. Noticeably, conformational changes involving disorder exist in the AB, FG, and BC loops when the C-terminal tail of a symmetry-related molecule is unavailable for docking (Fig. 3).
The angle between the N-domain and C-domain of neighboring pilin subunits is 126°, and thus it is rather similar to the N- and M-domain (150°) and M- and C-domain (120°) angles for a single subunit. For the assembled SpaFED pilus structure, the adjacent subunits are each translated 120 Å and rotated ~60° along the axis, with a diameter of 30–50 Å (Fig. 7a, c). Presumably during the pilus assembly process, the SpaFED C-type sortase (SrtC2) cleaves the bond between Thr487 and Gly488 of the LPMTG-motif peptide in GG-SpaD and then catalyzes intermolecular isopeptide bond formation between Thr487 and the side chain of the linking lysine (Lys180) from the adjacent pilin (Fig. 7c). In this instance, it seems that the closure motion observed for the N-domain in the open conformational state is necessary for assembling GG-SpaD pilin subunits into a pilus fiber. Here, we propose that the process of sortase-mediated pilus polymerization follows an expose-ligate-seal mechanism (for details, see Fig. 7d and Discussion).
Crystal structure and MD simulation analysis of GG-SpaD suggests that the docking of the C-terminal tail from the adjacent subunit has a stabilizing effect on those regions of N-domain involved with intermolecular interactions, which itself is primarily through an interaction between the AB loop and C-terminal tail. To assess this possibility, we docked the N-domain (head) and C-domain (tail) of GG-SpaDC (i.e., blind docking) by using the ClusPro protein–protein docking tool50. Among the top ten best low-energy conformational models that were predicted, one shared a strong resemblance to the GG-SpaDC crystal structure (Fig. 7e).
Structural comparison of GG-SpaD
As determined by a DALI51 search of the PDB, a number of three-domain pilins are related to the structure of GG-SpaD (open/closed conformations and individual domains) (Supplementary Table 5), although the amino-acid sequence identity was low (in the range of 14–27%). In general, the CnaB fold of the N- and C-domains and the CnaA fold of the M-domain are well conserved across the three-domain pilins21, which includes GG-SpaD even with its overall structural orientation showing some differences (Fig. 8). The top three hits were Actinomyces oris FimP37 and C. diphtheriae SpaD33 and SpaA32 (Supplementary Table 5). Three-domain Streptococcus pyogenes T6 backbone pilin40 was eighth on the list. When we performed DALI searches with individual domains, the best fits for the N-, M-, and C-domains were for those from C. diphtheriae SpaD33, Streptococcus agalactiae BP-2a35, and two-domain GG-SpaA29, respectively (Supplementary Table 5). However, we never obtained a match for the N-domain when DALI searches were done using the full-length GG-SpaDO structure. Although GG-SpaDC (Fig. 8a) is topologically similar to other three-domain pilins (Fig. 8b–e), certain differences exist (see further in Supplementary Note 1).
Like GG-SpaD, two-domain GG-SpaA also has an intact isopeptide bond in the CnaB fold of its N-domain (Fig. 8f, g), but which is unformed when the connecting linker region bends in the absence of the C-domain29 (Fig. 8h). Interestingly, a bent type of conformation for the N-domain of GG-SpaA (Fig. 8i) could be established by aligning the C-terminal part of the linker region in the truncated form (Fig. 8h) with that of the C-domain in the full-length structure (Fig. 8f). For this, a DynDom analysis of domain motion shows a rotation of about 173° between the two domains, with bending at residues 171–181 and a closure motion of 74% (Fig. 8i). As seen by the superimposed structures (Fig. 8j) of N-domains from various backbone pilins (Fig. 8a–f), the locations of the isopeptide bonds are well conserved in these CnaB-type folds, but with obvious deviations in the loop regions. Clearly, this structural comparison indicates that the K–D isopeptide bond in the N-domain is only associated with the GG-SpaD pilin, an observation further substantiated by the structure-based sequence alignment of N-domains (Fig. 9).
Incidentally, although the backbone pilins of the Gram-negative chaperone-usher52 and type V53 pili consist of Ig-like folds, a DALI search did not reveal any structural similarity with GG-SpaD as their overall fold topologies differ from one another. Moreover, since the backbone pilins of the Gram-positive type IV pili contain a structurally dissimilar scaffold with a distinct β-sheet topology (αβ fold)54, these were not among the DALI hits.
AB loop disorder in the head-to-tail docking of GG-SpaD
As the disorder in the AB loop appears important for assembling the GG-SpaD subunits, we analyzed this further through in silico predictions. Disordered regions were predicted for the AB loop using the DISOPRED program55, with residues 51DEQIQNTGHD60 being identified. A short segment (56NTG58) within this disordered region was further identified as a protein-binding site in the AB loop (Fig. 10a, b). This intrinsically disordered segment in the AB loop apparently represents a molecular recognition feature (MoRF), as it undergoes a disorder-to-order transition and becomes structured upon binding to its partner protein, i.e., the C-terminal tail of GG-SpaD. BLAST searches of the UniProt Reference Clusters database at the UniprotKB site (www.uniprot.org) using GG-SpaD sequence found that the NTG segment is an invariant feature among other sortase-dependent pilins containing the YPKN pilin motif (Supplementary Fig. 3). As seen from both the docked GG-SpaD dimers in the crystal unit cell and the predicted docking model (Fig. 7), the NTG peptide is located at the middle of the AB loop (Fig. 10c) in the groove where the C-terminal tail would dock and form an interaction with the LPMT peptide. Additional protein interface analysis of GG-SpaD by PISA56 revealed that Asn56 of the NTG peptide would have the greatest stabilizing effect (Supplementary Table 4). Also found important is a conserved segment (162LP163) within the FG loop (Supplementary Fig. 3) that forms an L-shaped bend, which apparently makes partial contact with the NTG and LPMT peptide regions (Fig. 10c). Analysis of other related three-domain backbone pilins and two-domain GG-SpaA also show maximum disorder in the AB loop region (Supplementary Fig. 4).
We further compared the AB loop in the N-domains by structural superimposition (Figs. 8j, 10d–g). Unlike the other lengthier loops in pilin structures, the AB loop of the N-domain often lacks the secondary structure that would let it act as gate, and thus exposing the linking lysine during isopeptide bond formation. Nonetheless, it appears that both ends of the AB loop are tied together, either by a salt bridge as in GG-SpaD (Fig. 2b) or by a disulfide bond as in corynebacterial SpaA32 (Fig. 10d). Further, the linking lysine in the AB loop-formed groove seems to be engaged in a hydrogen bond with the main chain of the tyrosine residue in the YPKN pilin motif or with the AB loop just prior to intermolecular isopeptide bond formation. Interestingly, as with GG-SpaD, the AB loop in known pilin structures usually appears disordered when a structured C-terminal tail is not directed inwardly towards the groove region29,31,32,33,36,37. This might help explain why the N-domain is normally lost or removed in some backbone pilin crystal structures, as the residues for the C-terminal tail were not part of the recombinant protein.
The tertiary organization of GG-SpaD is much like other three-domain backbone pilins in Gram-positive bacteria21. However, apart from having some topological variances in loop lengths and positions, more notable structural differences in GG-SpaD lie with its N-domain. For instance, the N-domain has an intact isopeptide bond, which itself is atypically formed between lysine and aspartate and unlike the more common lysine-asparagine interaction. C. diphtheriae SpaD is the only other known three-domain backbone subunit whose N-domain also contains an intact isopeptide bond, albeit slow-forming and involving a K–N interaction33. K–D isopeptide bond formation in the N-domain of GG-SpaD likely also occurs slowly. The N-domain in two-domain backbone pilins27,29,41 is less flexible than in three-domain pilins, yet it also exhibits a K–N isopeptide bond. Among four-domain pilins, the N-domain isopeptide bond forms only during pilus assembly28, or when part of the C-terminal LPXTG motif is present and a pilus-like structure occurs in the crystal unit31.
Most backbone pilins contain the YPKN pilin motif peptide in their N-domain, wherein during pilus polymerization the lysine and asparagine residues participate in intermolecular and intramolecular isopeptide bond formation, respectively21. In GG-SpaD, an uncommon YPKD pilin motif exists in the N-domain and is conserved highly among other Lactobacillus strains. From the arrangement of GG-SpaD subunits as a native pilus backbone in the crystal unit and based on immunoblotting of residue-substituted protein (Supplementary Fig. 1), Lys180 of the YPKD peptide forms an intermolecular covalent link with Thr487 of the C-terminal LPXTG motif in an adjoining pilin. Moreover, continuous electron density supports that Asp181 (YPKD) forms an internal isopeptide bond with Lys45. Similar K–D isopeptide bonding has been observed in the C-domain of other backbone pilins, though not in their more flexible N-domain29,37. Presumably, other amino acids surrounding an internal isopeptide bond should impact whether an asparagine or aspartate residue is to be encoded genetically. Thus, the universal preference for a covalent interaction involving K–D over K–N by gut-adapted bacteria like L. rhamnosus GG might have evolved from the acidic conditions of the digestive tract.
Among the backbone pilins with a triple- or quadruple-domain structure, the N-domain is usually seen as the most flexible in nature, and thus, in many instances, its removal from the rest of the protein is needed for obtaining good X-ray-diffracting crystals28,30,33,34,35,38,39. Then again, for backbone pilins whose full-length structure has been solved32,33,37, the N-domain either lacks or slowly forms an isopeptide bond. Moreover, these full-length structures have revealed that the N-domain is somewhat laterally displaced from the long axis of the other domains, which themselves exhibit strong interface interactions with one another and show only a limited amount of motion. However, whereas this seems the case for three-domain backbone pilins like GG-SpaD, those with a two-domain organization are far more rigid in their structural makeup27,29,41. Nonetheless, while on its own or unliganded to the C-terminal tail of an adjoining pilin, the N-domain tends to be unstable in solution primarily due to the flexibility of the AB loop and the apparent absence of an isopeptide bond. Generally, this explains why the N-domain degrades while undergoing crystallization or does not form crystals at all. In this context, it was rather serendipitous that the N-domain structure of GG-SpaA was itself solved, as it appeared that in the crystal unit the C-terminal tail from the symmetry mate was a stabilizing influence on the mobile AB loop29. As for GG-SpaD in our present study, the solution of its full-length structure in the closed conformation was facilitated somewhat similarly.
Structurally, the GG-SpaA backbone pilin contains two CnaB domains, where K–N and K–D internal isopeptide bonds are present in the N- and C-domains, respectively29. By comparison, the overall structures of GG-SpaD and GG-SpaA bear little resemblance to each other, aside from having the same CnaB fold type for their N- and C-domains, though still lacking strong amino-acid sequence identity and exhibiting opposing kinds of intramolecular isopeptide bonds (K–N or K–D). More pointedly, the additional CnaA domain between the N- and C-domains in GG-SpaD makes this pilin larger than GG-SpaA, indicating that the overall structural topology between the SpaFED and SpaCBA pilus backbones is architecturally distinct.
Perhaps the most interesting aspect of this study was solving the GG-SpaD structure in the open conformational state, whereby the N-domain is no longer aligned with the M- and C-domains in a linear manner (closed conformation), but rather instead is positioned perpendicularly next to the middle region of the M-domain. Since this offers a unique structural perspective to backbone pilins, we suggest that the open conformation represents an intermediary snapshot of the backbone pilin during its sortase-mediated assembly into the SpaFED pilus (Fig. 7c, d). This viewpoint is well supported by the novel structural features of the bent N-domain: skewing away from the pilus axis; lacking the K–D isopeptide bond; exhibiting disorder in the AB loop that covers the linking Lys180; exposing Lys180 to the thioacyl sortase-pilin intermediate for accessibility to nucleophilic attack; displaying greater flexibility when an adjacent C-terminal tail is not docked in place; and causing the molecular arrangement of a pilus-like fiber in the crystal unit to be lost.
Moreover, we note that the inclusion of ionic NaCl during GG-SpaD crystal formation and SAXS analysis seems to have disrupted the normal interface interactions between the N- and M-domains, thereby favoring a repositioned N-domain. Along with our biophysical analysis for domain motion, such results suggest a flexible state for GG-SpaD, and this might be of mechanistic importance for the intermolecular pilin cross-linking during pilus polymerization. Here it seems that the flexible N-domain, and in particular its AB loop, functions as a gatekeeper to control access to the linking lysine by the C-terminal LPMTG-motif threonine. Our residue identification of a MoRF in the disordered region of AB loop further supports a functional role for the N-domain, which, similarly, is a structural aspect of the S. agalactiae GBS52 basal pilin57.
Our findings regarding the structural properties observed for the closed and open conformations of GG-SpaD have led us to posit a mechanistic model that outlines the early stages leading up to the assembly of backbone pilins into the SpaFED pilus structure (Fig. 7d). Here, the open conformation represents the active and unliganded form of GG-SpaD. While in this state the N-domain is structurally relaxed until which time it associates with the C-domain of another pilin. However, during the open state, the mobile AB loop of the N-domain is flexible, leaving the side chain of the linking lysine (Lys180) unprotected for favoring nucleophilic attack. This stage is called expose. The ligate stage follows when the proximal sortase-acyl intermediate lets a new amide bond form between the C-terminal LPXT-motif threonine (Thr487) of one pilin and the N-terminal pilin-motif lysine (Lys180) of another adjacent pilin. At this point, the N-domain takes on the closed conformation, whereupon the AB loop undergoes a conformational change and becomes ordered by engaging in stabilizing interactions with topologies from the adjoining C-domain, and through this it encloses the groove-like hydrophobic pocket of the N-domain. This final stage is called seal. Functionally, the ordered AB loop helps shelter the connecting K–T isopeptide bond that forms between the two backbone pilin subunits, which together now assume a linear and rod-like shape and begins to resemble a polymerized pilus structure (Fig. 7a–c). Since the absence of an internal isopeptide bond from the D181A substitution lacked any impact on pilus polymerization (Supplementary Fig. 1), this suggests that internal K–D isopeptide bond formation occurs when the N-domain takes on the linear conformation after the intermolecular K–T isopeptide bond is produced. Presumably, the internal isopeptide bond after forming will help secure in place the N-domain and minimize its flexibility during the sealing stage, much like what a supporting guy-wire does for a utility pole.
Finally, based on our interpretation of the closed and open conformation structures of L. rhamnosus GG-SpaD, we conclude that the expose-ligate-seal mechanism defines the process by which an incoming backbone pilin is covalently docked during sortase-dependent pilus assembly and one that is made possible by the coordinated movement of the N-domain and its functional AB loop. We further suggest that this three-stage model of pilin assembly might generally hold true for the sortase-dependent pili of other Gram-positive bacteria.
Unprocessed L. rhamnosus GG (ATCC 53103) GG-SpaD protein is comprised of 517 amino acids (UniprotKB ID: A0A179XFF5). Recombinant full-length GG GG-SpaD (residues 36–485) was cloned and produced in E. coli BL21 (DE3) pLysS as described earlier46,58. For this, a putative 34-amino-acid signal peptide at the N-terminus and a 34-amino-acid C-terminal LPXTG-motif sorting signal (Fig. 1a) were replaced by cloning vector residues (MGRDPNS) and a hexahistidine tag (LPLEHHHHHH), respectively. Briefly, GG-SpaD-expressing cells were first disrupted by sonication and afterward the cell-free lysate was loaded onto a Ni2+-charged Hi-Trap chelating column (GE Healthcare) pre-equilibrated with buffer A (50 mM NaH2PO4, pH 7.4 and 150 mM NaCl). GG-SpaD protein was eluted by a linear gradient of buffer B (buffer A containing 400 mM imidazole), which was followed by size-exclusion chromatography using a Sephacryl S-200 (26/60) column (GE Healthcare) in buffer C (20 mM HEPES, pH 7.0, 150 mM NaCl, and 1 mM EDTA). A stable 33 kDa protein fragment of GG-SpaD was also generated by limited proteolysis using α-chymotrypsin (Sigma-Aldrich) as done previously46. N-terminal sequencing and mass spectrometric analysis confirmed that this 33 kDa protein encompasses residues 177–485, which corresponds to the M- and C-domains of GG-SpaD (GG-SpaDMC). Selenium derivatization of full-length GG-SpaD protein using a selenomethionine (SeMet) kit (Shanghai Medicilon Inc., China) was carried out according to the instructions of the manufacturer. GG-SpaDSeMet protein was purified similarly as described above. Mutant proteins of GG-SpaD were made with the primers listed in Supplementary Table 1 using a site-directed mutagenesis kit (Agilent Technologies). Here, selected residues involved in the formation of isopeptide bonds were replaced with alanine. PCR amplification was carried out using Pfu Turbo DNA polymerase (Stratagene). Amplified DNA was first treated with DpnI at 37 °C to digest the template strand, and then transformed into the E. coli DH5α strain. Transformed plasmids with the desired nucleotide changes were confirmed by DNA sequencing. Mutant constructs were cloned into pET-28 + and expressed in E. coli BL21 DE3 cells. Purification of mutant GG-SpaD was done with essentially the same protocol as used for the wild-type (WT) protein.
Crystallization, data collection, and processing
Initial tests for crystallizing GG-SpaD proteins were carried out with the Mosquito Crystal automated liquid-dispensing system (TTP Labtech) using commercially available crystal screening kits. Conditions showing crystals were subsequently optimized manually using the hanging drop-vapor diffusion method. For this, 1 µl aliquots of the protein and reservoir solutions were each mixed and equilibrated against 1 ml reservoir solution at 295 K. Further details about protein concentrations, buffers, and reservoir solutions are provided in Supplementary Table 6. GG-SpaDMC protein generated from the limited proteolysis approach yielded orthorhombic crystals that diffracted to 2.0 Å resolution at the home X-ray source using a GeniX3D Cu HF (high-flux) microbeam X-ray generator set at 0.6 mA and 50 kV (Xenocs, France) and a MAR 345 image-plate detector (MAR Research, Germany)46. X-ray diffraction of the GG-SpaDMC crystal form at the synchrotron source (ESRF BM14 beamline, Grenoble, France) gave 1.5 Å resolution (Table 1). For single-wavelength anomalous diffraction (SAD) data collection, sodium iodide-derivatized crystals of GG-SpaDMC were generated as done before46. Orthorhombic and SeMet crystals of full-length GG-SpaD were obtained with a similar protocol along with further optimization. Full-length GG-SpaD was also crystallized in a hexagonal form by including 1 M NaCl as an additive in the protein buffer. High-resolution native and selenium multiwavelength anomalous dispersion (MAD) datasets of these crystals were collected at the synchrotron source, all of which diffracted anisotropically in the range of 2.3 to 2.9 Å resolution. Cryoprotectants used for the data collections are listed in Supplementary Table 6. X-ray diffraction data were indexed and integrated by using XDS59 and scaled with Aimless60 from the CCP4 program suite61. An anisotropic correction was performed for all the data (except GG-SpaDMC) using the STARANISO Server (http://staraniso.globalphasing.org), and then used in final cycles of model building and refinement with COOT62 and REFMAC563, respectively. Optimal wavelengths for data collection at the synchrotron source (European Synchrotron Radiation Facility) were 0.95372 Å at the BM14 beamline (GG-SpaDC, GG-SpaDO, GG-SpaDMC, and GG-SpaDK365A) and 0.97625 Å (GG-SpaDD242A) at the ID30B beamline. Ramachandran statistics for the refined crystal structures showed 96–98% and 1–3% of residues in favored and allowed regions, respectively, with no outliers (0%) detected (Supplementary Table 7).
Initially, full-length GG-SpaD was crystallizable, but X-ray diffraction of the protein crystals at the home source led to an anisotropic pattern of streaky spots that was not indexable. The use of limited proteolysis had produced a stable 33 kDa protein fragment (GG-SpaDMC), whose crystals diffracted up to 2 Å and 1.5 Å resolution using home46 and synchrotron sources, respectively (Table 1). GG-SpaDMC crystals belonged to the primitive orthorhombic space group (P212121) with two molecules in the asymmetric unit. Structure solution for GG-SpaDMC was via iodide-SAD phasing with the diffraction data obtained at the home source46. Model refinement of GG-SpaDMC was performed with the high-resolution native data collected at the synchrotron source (Table 1). Eventually, with the combined use of optimal crystallization conditions and data collection parameters, processable data for full-length GG-SpaD were generated. These crystals diffracted anisotropically up to 2.3 Å resolution at the synchrotron source and belonged to the same primitive orthorhombic space group as above, and as well contained just two molecules in the asymmetric unit. Structure solution by molecular replacement (MR) using PHASER64 with GG-SpaDMC as a search model yielded insufficient density for the N-domain. Instead, data collected from the GG-SpaDSeMet crystal at the peak, remote, and inflection wavelengths were used for MAD phasing with AUTOSHARP65 (Supplementary Table 8), which is integrated in CCP461 and allowed the core β-strands of the N-domain to be built. With this now as a partial model for MR-SAD phasing, data collected at the peak wavelength of selenium were used to build the side chains and loops of the N-domain structure. All the residues were clearly seen in the electron density map for the two GG-SpaD molecules in the orthorhombic crystal unit, though molecule A displayed a relatively higher B-factor value than molecule B. The FG loop in the N-domain and two residues at C-terminus end were disordered in molecule A, whereas molecule B had only a few disordered residues in the AB loop of the N-domain. This solved crystal structure of full-length GG-SpaD is denoted as GG-SpaDC for a closed conformation. The model of full-length GG-SpaD was refined against the anisotropically truncated native data (Table 1).
During the process of improving the diffraction quality of full-length GG-SpaD crystals, a hexagonal crystal form was identified when additional salt (1 M NaCl) was included with the protein-buffer solution in the crystallization screening experiments. These crystals diffracted to 2.5 Å, but belonged to the primitive hexagonal space group (P6522) and exhibited only one molecule in the asymmetric unit. However, structure solution by MR using GG-SpaDMC as a search model now gave a traceable difference electron density map, though for a differently placed N-domain that is situated perpendicular to the positioning of the M- and C-domains. The N-domain model from the orthorhombic form of GG-SpaD was also used as a reference structure for model building. After final rounds of model building and refinement using the anisotropically truncated data for the single molecule of GG-SpaD in the asymmetric unit, disorderedness was observed in the AB (residues 46–67) and FG (residues 164–171) loops of the N-domain, EF loop (residues 226–233) of the M-domain, and three residues at the C-terminal end (residues 482–485). This full-length GG-SpaD crystal structure is denoted as GG-SpaDO for an open conformation. The model of full-length GG-SpaD (orthorhombic) was used in the MR and refinement of the mutant GG-SpaD structures (Table 1).
Small-angle X-ray scattering (SAXS) analysis
SAXS analysis was carried out to assess whether the GG-SpaDC and GG-SpaDO crystal structures are representative of proteins in solution. For this, purified recombinant GG-SpaD protein (8.5 mg mL-1 and 17 mg mL-1) was dissolved in a buffer containing 20 mM HEPES (pH 7) and 150 mM NaCl. To simulate the conditions for obtaining the GG-SpaDO structure, a sample of fresh GG-SpaD protein was also incubated with 1 M NaCl in the same buffer above for 24 h prior to the SAXS analysis. Scattering data were generated with a SAXS Space small-angle X-ray scattering instrument (Anton Paar, Austria) equipped with a sealed tube (line collimation) X-ray source and a one-dimensional CMOS Mythen detector (Dectris, Switzerland) at the SAXS facility in the Institute of Microbial Technology (IMTECH), Chandigarh, India. Data for each sample were obtained by a 20-min exposure (two 10-min frames) at 20 °C. Calibration and correction of the scattering patterns for the primary beam position was done with SAXStreat software (Anton Paar). A buffer scan was recorded before the sample runs under the same conditions and subtracted from the collected data using SAXSquant software (Anton Paar). Estimates of the radius of gyration (Rg) and maximal particle dimension (D-max) were obtained using programs (PRIMUS and GNOM, respectively) within the ATSAS software package. The program DAMMIF was used to generate low-resolution ab initio envelopes using the pair distribution function P(r), which were further averaged with the program DAMAVER. The normalized spatial discrepancy (NSD) value (computed using SUPCOMB) was 0.6 as an average of ten bead models (Supplementary Table 2).
Molecular simulations and domain motion analysis
Molecular dynamics simulations of domain flexibility in GG-SpaD were performed using the AMBER14 program package (http://ambermd.org/)66, with AMBER14 force field and TIP3 potential for analyzing proteins and water molecules, respectively. Full-length models of the GG-SpaDC and GG-SpaDO crystal structures were hydrated in a 10 Å cubic water box, with the net charge neutralized by including an appropriate number of Na+ ions. After incremental heating to 310 K, simulation runs lasted 100 ns, with a time step of 10 fs and using the NPT ensemble at 310 K and 1 bar. A Nosé-Hoover thermostat (coupling constant tt = 2.524, 25) and a Parrinello-Rahman barostat (tp = 5.0 ps) were used to control the temperature and pressure, respectively. Root mean-square deviation (RMSD) and root mean-square fluctuation (RMSF) calculations per simulation frame that measured backbone flexibility (Cα atoms and amino-acid residues) were analyzed using CPPTRAJ (http://ambermd.org/tutorials/analysis/#cpptraj)66 and visualized in VMD (http://www.ks.uiuc.edu/Research/vmd/). Graphical representations of the RMSD and RMSF values were made using Graph Pad Prism software.
In silico analysis of domain motion in GG-SpaD was performed with the DynDom program49 (http://fizz.cmp.uea.ac.uk/dyndom/). Refined coordinates for the GG-SpaDC and GG-SpaDO crystal structures were uploaded onto the DynDom server and the analyses for conformational change were performed with default settings. Disorder predictions were initially done through the DISOPRED55 program on the XtalPred server (http://ffas.burnham.org/XtalPred-cgi/xtal.pl) using the sequence of GG-SpaD that was used in protein production. DISOPRED on the PSIPRED server (http://bioinf.cs.ucl.ac.uk/psipred) was later used to predict a disordered protein-binding site. A search for GG-SpaD-related sequences in the UniProt Reference Clusters database and their alignment was carried out using tools from the UniprotKB site (http://www.uniprot.org/). PISA (Protein Interfaces, Surfaces and Assemblies)56 at the European Bioinformatics Institute (http://www.ebi.ac.uk/pdbe/prot_int/pistart.html) was used to analyze the interaction and interface between the two GG-SpaDC molecules in the crystal unit. Multiple protein structural alignments were performed using MUSTANG (http://lcb.infotech.monash.edu.au/mustang), with the corresponding sequence alignment diagram prepared by using Chimera (https://www.cgl.ucsf.edu/chimera).
Computational blind docking of the C-domain to the N-domain of GG-SpaDC was done using the ClusPro50 web server (https://cluspro.bu.edu/). The N- and C-domains from the crystal structure of GG-SpaDC were used as the receptor and ligand, respectively. Representative models from the top ten most favored clusters were predicted by different scoring modes (i.e., balanced, electrostatic-favored, hydrophobic-favored, and van der Waals + electrostatics-favored) and analyzed visually. The third and eighth models from the electrostatic-favored and balanced, respectively, scoring modes had resembled the docked molecules in the crystal structures.
Immunoblotting of mutant SpaCBA-piliated lactococcal clones
As Lys180 of the YPKD pilin motif peptide in the N-domain of GG-SpaD is predicted to form an intermolecular K–T isopeptide bond, this was tested by making the corresponding K180A substitution in a nisin-inducible recombinant SpaFED-piliated L. lactis clone (GRS1189)45 and observing the effect on pilus assembly. In addition, Asp181 of the YPKD peptide was examined similarly (D181A), as this residue forms an internal isopeptide bond with Lys45, though this position is typically occupied by an asparagine in the more commonly found YPKN pilin motif. The construction of the mutant clones GRS1234 (K180A) and GRS1232 (D181A) was largely done as described previously29,45. For this, the expression plasmid (pKTH5393) containing the L. rhamnosus GG spaFED pilus genes acted as the template for adding the needed nucleotide changes (AAA → GCG for K180A or GAC → GCG for D181A) into the spaD gene by the overlap extension PCR technique67. Mutagenic PCR primers for the site-directed modifications were as follows: for K180A, forward 5'-CATCTTTATCCTGCGGACAGTCTTGTTAC-3' and reverse 5'-GTAACAAGACTGTCCGCAGGATAAAGATG-3' and for D181A, forward 5'-CATCTTTATCCTAAAGCGAGTCTTGTTAC-3' and reverse 5'-GTAACAAGACTCGCTTTAGGATAAAGATG-3'. Mutant plasmids pKTH5456 (for K180A) and pKTH5455 (for D181A) were introduced into L. lactis NZ9000 by standard electroporation68. Afterward, the K180A and D181A substitutions were corroborated by DNA sequencing. Growth and nisin-induced expression of lactococcal cells were carried out as done before45. Included as positive and negative controls were lactococcal clones GRS1189 and GRS1052 (containing empty-vector pKTH5080; unpublished), respectively. Immunoblotting experiments were performed using established methods. Briefly, cell pellets were recovered by centrifugation, and then washed (once) and resuspended with phosphate-buffered saline. Lactococcal cell suspensions were mixed with Laemmli buffer (1:1), incubated at 100 °C for at least 5 min, and later clarified centrifugally. Protein content was resolved electrophoretically on a precast 4–20% SDS-polyacrylamide gel (Bio-Rad) and followed by electroblotting onto a 0.45-μm nitrocellulose membrane (Bio-Rad). The membrane was then probed with primary (1:5000 diluted rabbit anti-GG-SpaD serum58) and secondary (1:10,000 diluted horseradish peroxidase-conjugated goat anti-rabbit IgG; Bio-Rad) antibodies. GG-SpaD bands were detected by using a chemiluminescent kit (Western Lightning Plus-ECL; Perkin Elmer, Inc.) according to manufacturer instructions.
The atomic coordinates of the models and their corresponding structure factors have been deposited in the Protein Data Bank (www.pdb.org) with the entry codes 5YU5 (WT full-length in closed/linear conformation), 5YXO (WT full-length in open/bent conformation), 5YXG (WT C-terminal fragment derived from limited proteolysis), 5Z0Z (D242A), and 5Z24 (K365A). All other data not present in the published paper or supplementary files are available from the authors upon reasonable request.
Kline, K. A., Dodson, K. W., Caparon, M. G. & Hultgren, S. J. A tale of two pili: assembly and function of pili in bacteria. Trends Microbiol. 18, 224–232 (2010).
Proft, T. & Baker, E. N. Pili in Gram-negative and Gram-positive bacteria—structure, assembly and their role in disease. Cell. Mol. Life Sci. 66, 613–635 (2009).
Craig, L., Pique, M. E. & Tainer, J. A. Type IV pilus structure and bacterial pathogenicity. Nat. Rev. Microbiol. 2, 363–378 (2004).
Hospenthal, M. K., Costa, T. R. D. & Waksman, G. A comprehensive guide to pilus biogenesis in Gram-negative bacteria. Nat. Rev. Microbiol. 15, 365–379 (2017).
Melville, S. & Craig, L. Type IV pili in Gram-positive bacteria. Microbiol. Mol. Biol. Rev. 77, 323–341 (2013).
Pansegrau, W. & Bagnoli, F. Pilus assembly in Gram-positive bacteria. Curr. Top. Microbiol. Immunol. 404, 203–233 (2017).
Telford, J. L., Barocchi, M. A., Margarit, I., Rappuoli, R. & Grandi, G. Pili in Gram-positive pathogens. Nat. Rev. Microbiol. 4, 509–519 (2006).
Ton-That, H. & Schneewind, O. Assembly of pili in Gram-positive bacteria. Trends Microbiol. 12, 228–234 (2004).
Kankainen, M. et al. Comparative genomic analysis of Lactobacillus rhamnosus GG reveals pili containing a human- mucus binding protein. Proc. Natl Acad. Sci. USA 106, 17193–17198 (2009).
Yu, X. et al. Human gut-commensalic Lactobacillus ruminis ATCC 25644 displays sortase-assembled surface piliation: Phenotypic characterization of its fimbrial operon through in silico predictive analysis and recombinant expression in Lactococcus lactis. PLoS ONE 10, e0145718 (2015).
Turroni, F. et al. Role of sortase-dependent pili of Bifidobacterium bifidum PRL2010 in modulating bacterium-host interactions. Proc. Natl Acad. Sci. USA 110, 11151–11156 (2013).
Danne, C. & Dramsi, S. Pili of Gram-positive bacteria: Roles in host colonization. Res. Microbiol. 163, 645–658 (2012).
Krishnan, V., Chaurasia, P., & Kant, A. in Probiotics and Prebiotics in Human Nutrition and Health (eds Rao, V., & Rao, L.G.) 115–133 (InTech: London, 2016).
von Ossowski, I. Novel molecular insights about lactobacillar sortase-dependent piliation. Int. J. Mol. Sci. 18, 1551 (2017).
Hendrickx, A. P., Budzik, J. M., Oh, S. Y. & Schneewind, O. Architects at the bacterial surface—sortases and the assembly of pili with isopeptide bonds. Nat. Rev. Microbiol. 9, 166–176 (2011).
Mandlik, A., Das, A. & Ton-That, H. The molecular switch that activates the cell wall anchoring step of pilus assembly in Gram-positive bacteria. Proc. Natl Acad. Sci. USA 105, 14147–14152 (2008).
Necchi, F. et al. Sortase A substrate specificity in GBS pilus 2a cell wall anchoring. PLoS ONE 6, e25300 (2011).
Swaminathan, A. et al. Housekeeping sortase facilitates the cell wall anchoring of pilus polymers in Corynebacterium diphtheriae. Mol. Microbiol. 66, 961–974 (2007).
Mandlik, A., Swierczynski, A., Das, A. & Ton-That, H. Pili in Gram-positive bacteria: assembly, involvement in colonization and biofilm development. Trends Microbiol. 16, 33–40 (2008).
Kang, H. J. & Baker, E. N. Structure and assembly of Gram-positive bacterial pili: unique covalent polymers. Curr. Opin. Struct. Biol. 22, 200–207 (2012).
Krishnan, V. Pilins in Gram-positive bacteria: A structural perspective. IUBMB Life 67, 533–543 (2015).
Krishnan, V. & Narayana, S. V. Crystallography of Gram-positive bacterial adhesins. Adv. Exp. Med. Biol. 715, 175–195 (2011).
Deivanayagam, C. C. et al. Novel fold and assembly of the repetitive B region of the Staphylococcus aureus collagen-binding surface protein. Structure 8, 67–78 (2000).
Symersky, J. et al. Structure of the collagen-binding domain from a Staphylococcus aureus adhesin. Nat. Struct. Biol. 4, 833–838 (1997).
Vengadesan, K. & Narayana, S. V. Structural biology of Gram-positive bacterial adhesins. Protein Sci. 20, 759–772 (2011).
Kang, H. J. & Baker, E. N. Intramolecular isopeptide bonds give thermodynamic and proteolytic stability to the major pilin protein of Streptococcus pyogenes. J. Biol. Chem. 284, 20729–20737 (2009).
Kang, H. J., Coulibaly, F., Clow, F., Proft, T. & Baker, E. N. Stabilizing isopeptide bonds revealed in Gram-positive bacterial pilus structure. Science 318, 1625–1628 (2007).
Budzik, J. M. et al. Intramolecular amide bonds stabilize pili on the surface of bacilli. Proc. Natl Acad. Sci. USA 106, 19992–19997 (2009).
Chaurasia, P., Pratap, S., von Ossowski, I., Palva, A. & Krishnan, V. New insights about pilus formation in gut-adapted Lactobacillus rhamnosus GG from the crystal structure of the SpaA backbone-pilin subunit. Sci. Rep. 6, 28664 (2016).
Cozzi, R. et al. Structure and assembly of group B Streptococcus pilus 2b backbone protein. PLoS ONE 10, e0125875 (2015).
El Mortaji, L. et al. The full-length Streptococcus pneumoniae major pilin RrgB crystallizes in a fibre-like structure, which presents the D1 isopeptide bond and provides details on the mechanism of pilus polymerization. Biochem. J. 441, 833–841 (2012).
Kang, H. J., Paterson, N. G., Gaspar, A. H., Ton-That, H. & Baker, E. N. The Corynebacterium diphtheriae shaft pilin SpaA is built of tandem Ig-like modules with stabilizing isopeptide and disulfide bonds. Proc. Natl Acad. Sci. USA 106, 16967–16971 (2009).
Kang, H. J. et al. A slow-forming isopeptide bond in the structure of the major pilin SpaD from Corynebacterium diphtheriae has implications for pilus assembly. Acta Crystallogr. D. Biol. Crystallogr. 70, 1190–1201 (2014).
Mishra, A. et al. Two autonomous structural modules in the fimbrial shaft adhesin FimA mediate Actinomyces interactions with streptococci and host cells during oral biofilm development. Mol. Microbiol. 81, 1205–1220 (2011).
Nuccitelli, A. et al. Structure-based approach to rationally design a chimeric protein for an effective vaccine against Group B Streptococcus infections. Proc. Natl Acad. Sci. USA 108, 10278–10283 (2011).
Paterson, N. G. & Baker, E. N. Structure of the full-length major pilin from Streptococcus pneumoniae: Implications for isopeptide bond formation in Gram-positive bacterial pili. PLoS ONE 6, e22095 (2011).
Persson, K., Esberg, A., Claesson, R. & Stromberg, N. The pilin protein FimP from Actinomyces oris: Crystal structure and sequence analyses. PLoS ONE 7, e48364 (2012).
Spraggon, G. et al. Supramolecular organization of the repetitive backbone unit of the Streptococcus pneumoniae pilus. PLoS ONE 5, e10919 (2010).
Vengadesan, K., Ma, X., Dwivedi, P., Ton-That, H. & Narayana, S. V. A model for group B Streptococcus pilus type 1: the structure of a 35-kDa C-terminal fragment of the major pilin GBS80. J. Mol. Biol. 407, 731–743 (2011).
Young, P. G. et al. Structural conservation, variability, and immunogenicity of the T6 backbone pilin of serotype M6 Streptococcus pyogenes. Infect. Immun. 82, 2949–2957 (2014).
Shaik, M. M. et al. A structural snapshot of type II pilus formation in Streptococcus pneumoniae. J. Biol. Chem. 290, 22581–22592 (2015).
Pace, F., Pace, M. & Quartarone, G. Probiotics in digestive diseases: Focus on Lactobacillus GG. Minerva Gastroenterol. Dietol. 61, 273–292 (2015).
Reunanen, J., von Ossowski, I., Hendrickx, A. P., Palva, A. & de Vos, W. M. Characterization of the SpaCBA Pilus Fibers in the Probiotic Lactobacillus rhamnosus GG. Appl. Environ. Microbiol. 78, 2337–2344 (2012).
O’Connell Motherway, M. et al. Functional genome analysis of Bifidobacterium breve UCC2003 reveals type IVb tight adherence (Tad) pili as an essential and conserved host-colonization factor. Proc. Natl Acad. Sci. USA 108, 11217–11222 (2011).
Rintahaka, J., Yu, X., Kant, R., Palva, A. & von Ossowski, I. Phenotypical analysis of the Lactobacillus rhamnosus GG fimbrial spaFED operon: surface expression and functional characterization of recombinant SpaFED pili in Lactococcus lactis. PLoS ONE 9, e113922 (2014).
Chaurasia, P., von Ossowski, I., Palva, A. & Krishnan, V. Purification, crystallization and preliminary X-ray diffraction analysis of SpaD, a backbone-pilin subunit encoded by the fimbrial spaFED operon in Lactobacillus rhamnosus GG. Acta Crystallogr. F. Struct. Biol. Commun. 71, 103–106 (2015).
Kant, A., von Ossowski, I., Palva, A. & Krishnan, V. Crystallization and X-ray crystallographic analysis of the adhesive SpaC pilin subunit in the SpaCBA pilus of gut-adapted Lactobacillus rhamnosus GG. Protein Pept. Lett. 23, 365–371 (2016).
Mishra, A. K., Megta, A. K., Palva, A., von Ossowski, I. & Krishnan, V. Crystallization and X-ray diffraction analysis of SpaE, a basal pilus protein from the gut-adapted L actobacillus rhamnosus GG. Acta Crystallogr. F. Struct. Biol. Commun. 73, 321–327 (2017).
Hayward, S. & Berendsen, H. J. Systematic analysis of domain motions in proteins from conformational change: new results on citrate synthase and T4 lysozyme. Proteins 30, 144–154 (1998).
Kozakov, D. et al. The ClusPro web server for protein-protein docking. Nat. Protoc. 12, 255–278 (2017).
Holm, L. & Rosenstrom, P. Dali server: conservation mapping in 3D. Nucl. Acids Res. 38, W545–W549 (2010).
Waksman, G. & Hultgren, S. J. Structural biology of the chaperone-usher pathway of pilus biogenesis. Nat. Rev. Microbiol. 7, 765–774 (2009).
Xu, Q. et al. A distinct type of pilus from the human microbiome. Cell 165, 690–703 (2016).
Craig, L. et al. Type IV pilin structure and assembly: X-ray and EM analyses of Vibrio cholerae toxin-coregulated pilus and Pseudomonas aeruginosa PAK pilin. Mol. Cell 11, 1139–1150 (2003).
Ward, J. J., Sodhi, J. S., McGuffin, L. J., Buxton, B. F. & Jones, D. T. Prediction and functional analysis of native disorder in proteins from the three kingdoms of life. J. Mol. Biol. 337, 635–645 (2004).
Krissinel, E. & Henrick, K. Inference of macromolecular assemblies from crystalline state. J. Mol. Biol. 372, 774–797 (2007).
Krishnan, V. et al. An IgG-like domain in the minor pilin GBS52 of Streptococcus agalactiae mediates lung epithelial cell adhesion. Structure 15, 893–903 (2007).
von Ossowski, I. et al. Mucosal adhesion properties of the probiotic Lactobacillus rhamnosus GG SpaCBA and SpaFED pilin subunits. Appl. Environ. Microbiol. 76, 2049–2057 (2010).
Kabsch, W. XDS. Acta Crystallogr. D. Biol. Crystallogr. 66, 125–132 (2010).
Evans, P. R. & Murshudov, G. N. How good are my data and what is the resolution? Acta Crystallogr. D. Biol. Crystallogr. 69, 1204–1214 (2013).
Winn, M. D. et al. Overview of the CCP4 suite and current developments. Acta Crystallogr. D. Biol. Crystallogr. 67, 235–242 (2011).
Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. Features and development of Coot. Acta Crystallogr. D. Biol. Crystallogr. 66, 486–501 (2010).
Murshudov, G. N. et al. REFMAC5 for the refinement of macromolecular crystal structures. Acta Crystallogr. D. Biol. Crystallogr. 67, 355–367 (2011).
McCoy, A. J. et al. Phaser crystallographic software. J. Appl. Crystallogr. 40, 658–674 (2007).
Vonrhein, C., Blanc, E., Roversi, P. & Bricogne, G. Automated structure solution with autoSHARP. Methods Mol. Biol. 364, 215–230 (2007).
Case, D. A. et al. AMBER 14. (University of California, San Francisco, 2014).
Higuchi, R., Krummel, B. & Saiki, R. K. A general method of in vitro preparation and specific mutagenesis of DNA fragments: study of protein and DNA interactions. Nucl. Acids Res. 16, 7351–7367 (1988).
Holo, H. & Nes, I. F. High-frequency transformation, by electroporation, of Lactococcus lactis subsp. cremoris grown with glycine in osmotically stabilized media. Appl. Environ. Microbiol. 55, 3119–3123 (1989).
This study was funded with the support of the Regional Center for Biotechnology (RCB) and the Department of Biotechnology (DBT) (No. BT/PR5891/BRB/10/1098/2012), India, DBT (PC), and Academy of Finland grants (Nos. 277362, 118165, 118602, and 141140) at the University of Helsinki. We thank RCB for the support provided with the home source X-ray diffraction and computational facility. Our thanks to the India-ESRF partnership program for providing access to synchrotron source as well as to Drs. Hassan Belrhali and Babu Manjashetty at BM14 beamline and other beamline scientists at ID30B in the ESRF for their support during data collection. We acknowledge the support of Dr. Ashish and Mr. Shivpratap Singh Yadav along with use of the SAXS facility at IMTECH, Chandigarh for the SAXS experiments. Esa Pohjolainen (University of Helsinki) is acknowledged for his assistance in constructing and immunoblotting the GRS1232 and GRS1234 lactococcal mutant clones.
The authors declare no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
About this article
Cite this article
Chaurasia, P., Pratap, S., Palva, A. et al. Bent conformation of a backbone pilin N-terminal domain supports a three-stage pilus assembly mechanism. Commun Biol 1, 94 (2018). https://doi.org/10.1038/s42003-018-0100-0
Crystal structure of lactobacillar SpaC reveals an atypical five-domain pilus tip adhesin: Exposing its substrate-binding and assembly in SpaCBA pili
Journal of Structural Biology (2020)
Acta Crystallographica Section D Structural Biology (2019)
SpaB, an atypically adhesive basal pilin from the lactobacillar SpaCBA pilus: crystallization and X-ray diffraction analysis
Acta Crystallographica Section F Structural Biology Communications (2019)
Crystal structure of basal pilin SpaE reveals the molecular basis of its incorporation in the lactobacillar SpaFED pilus
Journal of Structural Biology (2019)