Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Electrical control of surface acoustic waves

Nature Electronics volume 5, pages 348–355 (2022)Cite this article

Subjects

Abstract

Acoustic waves at microwave frequencies are widely used in wireless communication and are potential information carriers in quantum applications. However, most acoustic devices are passive components, and the development of phononic integrated circuits is limited by the inability to control acoustic waves in a low-loss, scalable manner. Here we report the electrical control of gigahertz travelling acoustic waves at room temperature and millikelvin temperatures. We achieve phase modulation by tuning the elasticity of a lithium niobate acoustic waveguide via the electro-acoustic effect. This phase modulator is then used to build an acoustic frequency shifter based on serrodyne phase modulation, and phase modulators in a Mach–Zehnder interferometer configuration are used to create an electro-acoustic amplitude modulator. By tailoring the phase matching between acoustic and quasi-travelling electric fields, we achieve reconfigurable non-reciprocal modulation with a non-reciprocity of over 40 dB. To illustrate the potential of the approach in quantum applications, we show that our electro-acoustic modulator can provide coherent modulation of single-phonon-level acoustic waves at 50 mK.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on Springer Link
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: LN electro-acoustic platform.
Fig. 2: Electro-acoustic phase modulation.
Fig. 3: Electro-acoustic amplitude modulation.
Fig. 4: Non-reciprocal phase modulation of acoustic waves.

Similar content being viewed by others

Data availability

Source data are provided with the paper. Other data that support the findings of this study are available from the corresponding authors upon reasonable request.

References

  1. Campbell, C. Surface Acoustic Wave Devices and their Signal Processing Applications (Academic Press, 1989).

  2. Chu, Y. et al. Quantum acoustics with superconducting qubits. Science 358, 199–202 (2017).

    Article  MathSciNet  Google Scholar 

  3. Manenti, R. et al. Circuit quantum acoustodynamics with surface acoustic waves. Nat. Commun. 8, 975 (2017).

    Article  Google Scholar 

  4. Satzinger, K. J. et al. Quantum control of surface acoustic-wave phonons. Nature 563, 661–665 (2018).

    Article  Google Scholar 

  5. Arrangoiz-Arriola, P. et al. Resolving the energy levels of a nanomechanical oscillator. Nature 571, 537–540 (2019).

    Article  Google Scholar 

  6. Bienfait, A. et al. Phonon-mediated quantum state transfer and remote qubit entanglement. Science 364, 368–371 (2019).

    Article  Google Scholar 

  7. Andersson, G., Suri, B., Guo, L., Aref, T. & Delsing, P. Non-exponential decay of a giant artificial atom. Nat. Phys. 15, 1123–1127 (2019).

    Article  Google Scholar 

  8. Gustafsson, M. V. et al. Propagating phonons coupled to an artificial atom. Science 346, 207–211 (2014).

    Article  Google Scholar 

  9. Whiteley, S. J. et al. Spin–phonon interactions in silicon carbide addressed by Gaussian acoustics. Nat. Phys. 15, 490–495 (2019).

    Article  Google Scholar 

  10. Maity, S. et al. Coherent acoustic control of a single silicon vacancy spin in diamond. Nat. Commun. 11, 193 (2020).

    Article  Google Scholar 

  11. Jiang, W. et al. Efficient bidirectional piezo-optomechanical transduction between microwave and optical frequency. Nat. Commun. 11, 1166 (2020).

    Article  Google Scholar 

  12. Shao, L. et al. Microwave-to-optical conversion using lithium niobate thin-film acoustic resonators. Optica 6, 1498–1505 (2019).

    Article  Google Scholar 

  13. Eggleton, B. J., Poulton, C. G., Rakich, P. T., Steel, M. J. & Bahl, G. Brillouin integrated photonics. Nat. Photon. 13, 664–677 (2019).

    Article  Google Scholar 

  14. Forsch, M. et al. Microwave-to-optics conversion using a mechanical oscillator in its quantum ground state. Nat. Phys. 16, 69–74 (2020).

    Article  Google Scholar 

  15. MacCabe, G. S. et al. Nano-acoustic resonator with ultralong phonon lifetime. Science 370, 840–843 (2020).

    Article  Google Scholar 

  16. Hann, C. T. et al. Hardware-efficient quantum random access memory with hybrid quantum acoustic systems. Phys. Rev. Lett. 123, 250501 (2019).

    Article  Google Scholar 

  17. Pechal, M., Arrangoiz-Arriola, P. & Safavi-Naeini, A. H. Superconducting circuit quantum computing with nanomechanical resonators as storage. Quantum Sci. Technol. 4, 015006 (2018).

    Article  Google Scholar 

  18. Dahmani, Y. D., Sarabalis, C. J., Jiang, W., Mayor, F. M. & Safavi-Naeini, A. H. Piezoelectric transduction of a wavelength-scale mechanical waveguide. Phys. Rev. Appl. 13, 024069 (2020).

    Article  Google Scholar 

  19. Hatanaka, D., Mahboob, I., Onomitsu, K. & Yamaguchi, H. Phonon waveguides for electromechanical circuits. Nat. Nanotechnol. 9, 520–524 (2014).

    Article  Google Scholar 

  20. Fang, K., Matheny, M. H., Luan, X. & Painter, O. Optical transduction and routing of microwave phonons in cavity-optomechanical circuits. Nat. Photon. 10, 489–496 (2016).

    Article  Google Scholar 

  21. Mayor, F.M. et al. Gigahertz Phononic Integrated Circuits on Thin-Film Lithium Niobate on Sapphire. Phys. Rev. Applied 15, 014039 (2021).

    Article  Google Scholar 

  22. Fu, W. et al. Phononic integrated circuitry and spin-orbit interaction of phonons. Nat. Commun. 10, 2743 (2019).

    Article  Google Scholar 

  23. Yang, Y., Lu, R., Gao, L. & Gong, S. 10–60-GHz electromechanical resonators using thin-film lithium niobate. IEEE Trans. Microw. Theory Techn. 68, 5211–5220 (2020).

    Article  Google Scholar 

  24. Shao, L. et al. Non-reciprocal transmission of microwave acoustic waves in nonlinear parity–time symmetric resonators. Nat. Electron. 3, 267–272 (2020).

    Article  Google Scholar 

  25. Mansoorzare, H. & Abdolvand, R. Acoustoelectric non-reciprocity in lithium niobate-on-silicon delay lines. IEEE Electron Device Lett. 41, 1444–1447 (2020).

    Article  Google Scholar 

  26. Hackett, L. et al. Towards single-chip radiofrequency signal processing via acoustoelectric electron–phonon interactions. Nat. Commun. 12, 2769 (2021).

    Article  Google Scholar 

  27. Bandhu, L. & Nash, G. R. Controlling the properties of surface acoustic waves using graphene. Nano Res. 9, 685–691 (2016).

    Article  Google Scholar 

  28. Liang, B., Guo, X. S., Tu, J., Zhang, D. & Cheng, J. C. An acoustic rectifier. Nat. Mater. 9, 989–992 (2010).

    Article  Google Scholar 

  29. Fleury, R., Sounas, D. L., Sieck, C. F., Haberman, M. R. & Alù, A. Sound isolation and giant linear nonreciprocity in a compact acoustic circulator. Science 343, 516–519 (2014).

    Article  Google Scholar 

  30. Walker, E. et al. Nonreciprocal linear transmission of sound in a viscous environment with broken P symmetry. Phys. Rev. Lett. 120, 204501 (2018).

    Article  Google Scholar 

  31. Devaux, T., Cebrecos, A., Richoux, O., Pagneux, V. & Tournat, V. Acoustic radiation pressure for nonreciprocal transmission and switch effects. Nat. Commun. 10, 3292 (2019).

    Article  Google Scholar 

  32. Xu, H., Jiang, L., Clerk, A. A. & Harris, J. G. E. Nonreciprocal control and cooling of phonon modes in an optomechanical system. Nature 568, 65–69 (2019).

    Article  Google Scholar 

  33. Nomura, T. et al. Phonon magnetochiral effect. Phys. Rev. Lett. 122, 145901 (2019).

    Article  Google Scholar 

  34. Zhu, D. et al. Integrated photonics on thin-film lithium niobate. Adv. Opt. Photon. 13, 242–352 (2021).

    Article  Google Scholar 

  35. Cho, Y. & Yamanouchi, K. Nonlinear, elastic, piezoelectric, electrostrictive, and dielectric constants of lithium niobate. J. Appl. Phys. 61, 875–887 (1987).

    Article  Google Scholar 

  36. Shao, L. et al. Phononic band structure engineering for high-Q gigahertz surface acoustic wave resonators on lithium niobate. Phys. Rev. Appl. 12, 014022 (2019).

    Article  Google Scholar 

  37. De, S. K. & Aluru, N. R. Theory of thermoelastic damping in electrostatically actuated microstructures. Phys. Rev. B 74, 144305 (2006).

    Article  Google Scholar 

  38. Tabrizian, R., Rais-Zadeh, M. & Ayazi, F. Effect of phonon interactions on limiting the f.Q product of micromechanical resonators. 2009 International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS 2009), 2131-2134.

  39. Ekström, M. K. et al. Surface acoustic wave unidirectional transducers for quantum applications. Appl. Phys. Lett. 110, 073105 (2017).

  40. Zheng, L., Wu, D., Wu, X. & Lai, K. Visualization of surface-acoustic-wave potential by transmission-mode microwave impedance microscopy. Phys. Rev. Appl. 9, 061002 (2018).

    Article  Google Scholar 

  41. Zheng, L., Shao, L., Loncar, M. & Lai, K. Imaging acoustic waves by microwave microscopy: microwave impedance microscopy for visualizing gigahertz acoustic waves. IEEE Microw. Mag. 21, 60–71 (2020).

    Article  Google Scholar 

  42. Kurizki, G. et al. Quantum technologies with hybrid systems. Proc. Natl. Acad. Sci. USA 112, 3866–3873 (2015).

    Article  Google Scholar 

  43. Fu, W. et al. Cavity electro-optic circuit for microwave-to-optical conversion in the quantum ground state. Phys. Rev. A 103, 053504 (2021).

    Article  Google Scholar 

Download references

Acknowledgements

We thank C. Wang and C. Chia for fruitful discussion. This work is supported by the US Navy Office of Naval Research (ONR) QOMAND grant no. N00014-15-1-2761, DOE HEADS-QON grant no. DE-SC0020376, National Science Foundation (NSF) grant no. DMR-2004536, the Welch Foundation Grant F-1814 and NSF RAISE/TAQS grant no. NSF ECCS-1839197. N.S. is supported by the Natural Sciences and Engineering Research Council of Canada (NSERC) and the AQT Intelligent Quantum Networks and Technologies (INQNET) research programme. D.Z. is supported by the Harvard Quantum Initiative (HQI) postdoctoral fellowship and A*STAR Science and Engineering Research Council (SERC) Central Research Fund (CRF). L.S. is supported by the Virginia Tech Foundation.

Author information

Author notes

  1. These authors contributed equally: Linbo Shao, Di Zhu.

Authors and Affiliations

  1. John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, USA

    Linbo Shao, Di Zhu, Neil Sinclair, Yaowen Hu & Marko Lončar

  2. Bradley Department of Electrical and Computer Engineering, Virginia Tech, Blacksburg, VA, USA

    Linbo Shao

  3. Institute of Materials Research and Engineering, Agency for Science, Technology and Research (A*STAR), Singapore, Singapore

    Di Zhu

  4. Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, MA, USA

    Marco Colangelo & Karl K. Berggren

  5. Department of Physics, University of Texas at Austin, Austin, TX, USA

    Daehun Lee & Keji Lai

  6. Division of Physics, Mathematics and Astronomy, and Alliance for Quantum Technologies (AQT), California Institute of Technology, Pasadena, CA, USA

    Neil Sinclair

  7. Department of Physics, Harvard University, Cambridge, MA, USA

    Yaowen Hu

  8. Department of Applied Physics, Yale University, New Haven, CT, USA

    Peter T. Rakich

Authors
  1. Linbo Shao
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Di Zhu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Marco Colangelo
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Daehun Lee
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Neil Sinclair
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Yaowen Hu
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Peter T. Rakich
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Keji Lai
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Karl K. Berggren
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. Marko Lončar
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

L.S.: conceptualization, methodology, investigation, formal analysis, visualization, writing (original draft). D.Z.: methodology, investigation, writing (original draft). M.C.: investigation, writing (review and editing). D.L.: investigation, writing (review and editing). N.S.: methodology, investigation, writing (original draft). Y.H.: writing (review and editing). P.T.R.: writing (review and editing). K.L.: resources, methodology, writing (review and editing, and supervision). K.K.B.: resources, writing (review and editing, and supervision). M.L.: resources, writing (review and editing, and supervision).

Corresponding authors

Correspondence to Linbo Shao or Marko Lončar.

Ethics declarations

Competing interests

M.L. is involved in developing LN technologies at HyperLight Corporation. President and Fellows of Harvard College has a patent pending (Application number: PCT/US21/60426) on the electro-acoustic modulators, in which M.L. and L.S. are listed as inventors. The other authors declare no competing interests.

Peer review

Peer review information

Nature Electronics thanks Anton Kockum and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data

Extended Data Fig. 1 Simulated acoustic phase velocities for varying directions on X-cut LN.

The direction is defined by the angle respective to the crystal Z axis. The electromechanical coupling coefficient \(k^2 = 2\;(v_o - v_m)/v_o\), where vo and vm are the phase velocities when the top surface is free and electrically shorted, respectively. The direction of the waveguide used in our device is 30°, as indicated by the dash line.

Source data

Extended Data Fig. 2 Measured transmission spectra of the acoustic modulator at temperatures of 300 and 1.3 K.

The results indicate a 25 dB improvement in peak transmission at low temperature. The frequency shift of the spectrum is due to the temperature dependent elasticity of LN.

Source data

Extended Data Fig. 3 Measured Peak-to-peak acoustic phase changes due to sinusoidal modulating signals of varying peak-to-peak voltage (Vpp) at room and cryogenic temperatures.

The sinusoidal modulating signals are of the frequency fmod =10 kHz. Linear fits show Vπ of 53 V at room temperature (300 K) and 135 V at 1.3 K, respectively. The same device is measured as that in Fig. 2.

Source data

Extended Data Fig. 4 Modulation bandwidth of the 1-cm-long electro-acoustic phase modulator.

The modulation efficiency is indicated by the first sideband power due to the phase modulation. The measured 3-dB bandwidth is 110 kHz. The modulation approaches zero at fmod = 336 kHz when the acoustic traveling time through the modulator equals 1/fmod. The same device is measured as that in Fig. 2.

Source data

Extended Data Fig. 5 Fifty millikelvin measurement setup.

The electro-acoustic modulator is mounted on a mixing plate of a dilution fridge with a base temperature below 50 mK. The input microwave signal is provided by a signal generator and, to ensure negligible contribution of thermal noise, passed through attenuators at various temperature stages of the fridge before going into our device. The output microwave signal from the modulator passes through a circulator, a high-electron-mobility transistor (HEMT) amplifier at 4 K, two low-noise amplifiers at room temperature, and is finally detected by a real-time spectrum analyzer (RSA). The modulation signal is provided by a function generator. A controlled and thermally isolated thermal source, which consists of a heater, temperature sensor, and a 30 dB attenuator, is installed in the microwave line before our electro-acoustic modulator to calibrate the gain and added noise in the output/readout line.

Extended Data Fig. 6 Noise measurement of the electro-acoustic modulator at 50 mK.

Total noise power spectrum density near fc when (1) no signal is applied to the electro-acoustic modulator (black), (2) only the carrier microwave signal is applied (blue), and (3) both the carrier microwave and modulation signals are applied (red). The total noise power \(N_{tot} = N_{dev} + N_{add}\), where Ndev is the noise of the electro-acoustic modulator and Nadd is the added noise from the readout chain. Nadd is mainly determined by the high-electron-mobility transistor (HEMT) at the 4 K stage. The electro-acoustic modulation adds negligible noise and is thus suitable for quantum phononics. The same device is measured as that in Fig. 2. The error bars indicate the standard deviation of measured noise power spectrum density.

Source data

Extended Data Fig. 7 Phase matching between a traveling acoustic wave and a quasi-traveling electric field.

The modulation sideband power is measured with varied modulation frequency and phase delay between the three electrodes. The maximum modulations that satisfy the phase matching condition are indicated by the red line. The condition for the maximum nonreciprocity in phase modulation is indicated by the black dots, as the counter propagating acoustic waves experience opposite phase delays compared to the propagating waves. The sideband power is normalized to the unmodulated carrier acoustic wave power. The measured date is from the same device as in Figs. 4C and 4D, which consists of three electrodes with overall modulation length of 1 cm.

Source data

Supplementary information

Supplementary Video 1

Principle of non-reciprocal acoustic phase modulation. The first (last) 30 s depict a wavefront of the acoustic wave as a blue (red) dot travelling in the forward (backward) direction. The top window illustrates three electrodes of the modulator (labelled as V1, V2 and V3) that have sinusoidal signals applied that are 120° out of phase with each other. The bottom window depicts the signals in the time domain, depicting the electrode regions for each signal. The middle window indicates the phase accumulation experienced by the wavefront as it propagates through the modulator.

Source data

Source Data Fig. 1

Source data for plots.

Source Data Fig. 2

Source data for plots.

Source Data Fig. 3

Source data for plots.

Source Data Fig. 4

Source data for plots.

Source Data Extended Data Fig. 1

Source data for plots.

Source Data Extended Data Fig. 2

Source data for plots.

Source Data Extended Data Fig. 3

Source data for plots.

Source Data Extended Data Fig. 4

Source data for plots.

Source Data Extended Data Fig. 6

Source data for plots.

Source Data Extended Data Fig. 7

Source data for plots.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Shao, L., Zhu, D., Colangelo, M. et al. Electrical control of surface acoustic waves. Nat Electron 5, 348–355 (2022). https://doi.org/10.1038/s41928-022-00773-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41928-022-00773-3

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing