Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Three-dimensional foldable quantum dot light-emitting diodes

Nature Electronics volume 4, pages 671–680 (2021)Cite this article

Subjects

Abstract

Flexible light-emitting devices that can transform from two-dimensional to three-dimensional (3D) forms could be of use in the development of next-generation displays. Various approaches for converting two-dimensional structures into 3D architectures have been explored, including origami methods that rely on folding along lines in which a structure has been thinned. But the fabrication of foldable 3D light-emitting devices remains challenging due, in particular, to the lack of a practical method for patterning the folding lines. Here we show that 3D foldable quantum dot light-emitting diodes (QLEDs) can be created using laser patterning and metal etch-stop layers with customized ablation thresholds. The approach allows etching to be limited to selected layers of the multilayered QLEDs, and it can be precisely tuned by using alloy-type etch-stop layers. The approach can be used to create QLED architectures with extremely small bending radii (0.047 mm), and we illustrate its capabilities by fabricating a 3D foldable passive matrix array of QLEDs that can display letters and numbers.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on SpringerLink
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Three-dimensional folding of ultrathin QLEDs using laser-assisted selective patterning.
Fig. 2: Controlling the etching depth using alloy-type etch-stop layers.
Fig. 3: Bending and folding deformation of the pre-programmed ultrathin QLED.
Fig. 4: Various 3D architectures by folding pre-programmed ultrathin QLEDs.
Fig. 5: Passively driven 8 × 8 foldable QLED array deformed into a curtain-shaped form.
Fig. 6: Dynamic 2D–3D transformation of the foldable PM QLED array.

Similar content being viewed by others

Data availability

The data files that support the findings of this study are available from the corresponding authors upon reasonable request.

Code availability

We used Arduino 1.8.3 to operate the PM QLEDs. The customized source codes for Arduino are provided in Supplementary Fig. 9.

References

  1. Yokota, T. et al. Ultraflexible organic photonic skin. Sci. Adv. 2, e1501856 (2016).

    Article  Google Scholar 

  2. Han, T.-H. et al. Extremely efficient flexible organic light-emitting diodes with modified graphene anode. Nat. Photon. 6, 105–110 (2012).

    Article  Google Scholar 

  3. Choi, M. et al. Full-color active-matrix organic light-emitting diode display on human skin based on a large-area MoS2 backplane. Sci. Adv. 6, eabb5898 (2020).

    Article  Google Scholar 

  4. Koo, J. H. et al. Wearable electrocardiogram monitor using carbon nanotube electronics and color-tunable organic light-emitting diodes. ACS Nano 11, 10032–10041 (2017).

    Article  Google Scholar 

  5. Kagan, C. R., Lifshitz, E., Sargent, E. H. & Talapin, D. V. Building devices from colloidal quantum dots. Science 353, aac5523 (2016).

    Article  Google Scholar 

  6. Dai, X. et al. Solution-processed, high-performance light-emitting diodes based on quantum dots. Nature 515, 96–110 (2014).

    Article  Google Scholar 

  7. Kim, T.-H. et al. Full-colour quantum dot displays fabricated by transfer printing. Nat. Photon. 5, 176–182 (2011).

    Article  Google Scholar 

  8. Kim, D. et al. Polyethylenimine ethoxylated-mediated all-solution-processed high-performance flexible inverted quantum dot-light-emitting device. ACS Nano 11, 1982–1990 (2017).

    Article  Google Scholar 

  9. Choi, M. K. et al. Wearable red–green–blue quantum dot light-emitting diode array using high-resolution intaglio transfer printing. Nat. Commun. 6, 7149 (2015).

    Article  Google Scholar 

  10. Sim, K. et al. Three-dimensional curvy electronics created using conformal additive stamp printing. Nat. Electron. 2, 471–479 (2019).

    Article  Google Scholar 

  11. Han, M. et al. Three-dimensional piezoelectric polymer microsystems for vibrational energy harvesting, robotic interfaces and biomedical implants. Nat. Electron. 2, 26–35 (2019).

    Article  Google Scholar 

  12. Ning, X. et al. Mechanically active materials in three-dimensional mesostructures. Sci. Adv. 4, eaat8313 (2018).

    Article  Google Scholar 

  13. Zhang, K. et al. Origami silicon optoelectronics for hemispherical electronic eye systems. Nat. Commun. 8, 1782 (2017).

    Article  Google Scholar 

  14. Fu, H. et al. Morphable 3D mesostructures and microelectronic devices by multistable buckling mechanics. Nat. Mater. 17, 268–276 (2018).

    Article  Google Scholar 

  15. Song, Z. et al. Origami lithium-ion batteries. Nat. Commun. 5, 3140 (2014).

    Article  Google Scholar 

  16. Lee, W. et al. Two-dimensional materials in functional three-dimensional architectures with applications in photodetection and imaging. Nat. Commun. 9, 1417 (2018).

    Article  Google Scholar 

  17. Yang, S. et al. ‘Cut-and-paste’ manufacture of multiparametric epidermal sensor systems. Adv. Mater. 27, 6423–6430 (2015).

    Article  Google Scholar 

  18. Kin, T. et al. Kirigami-inspired 3D organic light-emitting diode (OLED) lighting concepts. Adv. Mater. Technol. 3, 1800067 (2018).

    Article  Google Scholar 

  19. Lee, Y.-K. et al. Computational wrapping: a universal method to wrap 3D-curved surfaces with nonstretchable materials for conformal devices. Sci. Adv. 6, eaax6212 (2020).

    Article  Google Scholar 

  20. Yan, Z. et al. Controlled mechanical buckling for origami-inspired construction of 3D microstructures in advanced materials. Adv. Funct. Mater. 26, 2629–2639 (2016).

    Article  Google Scholar 

  21. Lim, S. et al. Assembly of foldable 3D microstructures using graphene hinges. Adv. Mater. 32, 2001303 (2020).

    Article  Google Scholar 

  22. Huang, Z. et al. Three-dimensional integrated stretchable electronics. Nat. Electron. 1, 473–480 (2018).

    Article  Google Scholar 

  23. Choi, M. K. et al. Extremely vivid, highly transparent, and ultrathin quantum dot light-emitting diodes. Adv. Mater. 30, 1703279 (2018).

    Article  Google Scholar 

  24. Oh, N. et al. Double-heterojunction nanorod light-responsive LEDs for display applications. Science 355, 616–619 (2017).

    Article  Google Scholar 

  25. Byskov-Nielsen, J., Savolainen, J. M., Christensen, M. S. & Balling, P. Ultra-short pulse laser ablation of metals: threshold fluence, incubation coefficient and ablation rates. Appl. Phys. A 101, 97–101 (2010).

    Article  Google Scholar 

  26. Garnov, S. V. et al. Microsecond laser material processing at 1.06 μm. Laser Phys. 14, 910–915 (2004).

    Google Scholar 

  27. Ravi-Kumar, S., Lies, B., Lyu, H. & Qin, H. Laser ablation of polymers: a review. Procedia Manuf. 34, 316–327 (2019).

    Article  Google Scholar 

  28. Li, Y. Q., Rizzo, A., Cingolani, R. & Gigli, G. Bright white-light-emitting device from ternary nanocrystal composites. Adv. Mater. 18, 2545–2548 (2006).

    Article  Google Scholar 

  29. Shen, P. et al. Highly efficient, all-solution-processed, flexible white quantum dot light-emitting diodes. J. Mater. Chem. C 6, 9642–9648 (2018).

    Google Scholar 

  30. Lee, K.-H. et al. Highly-efficient, color-reproducible full-color electroluminescent devices based on red/green/blue quantum dot-mixed multilayer. ACS Nano 9, 10941–10949 (2015).

    Article  Google Scholar 

  31. Kim, J. et al. Ultrathin quantum dot display integrated with wearable electronics. Adv. Mater. 29, 1700217 (2017).

    Article  Google Scholar 

Download references

Acknowledgements

This research was supported by IBS-R006-D1 and IBS-R006-A1. This work was also supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT) (no. 2019R1A5A6099595). J.Y. acknowledges support from Samsung Research Funding & Incubation Center of Samsung Electronics under project no. SRFC-MA2002-03.

Author information

Author notes

  1. These authors contributed equally: Dong Chan Kim, Huiwon Yun, Junhee Kim.

Authors and Affiliations

  1. Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul, Republic of Korea

    Dong Chan Kim, Huiwon Yun, Junhee Kim, Hyojin Seung, Ja Hoon Koo, Taeghwan Hyeon & Dae-Hyeong Kim

  2. School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul, Republic of Korea

    Dong Chan Kim, Huiwon Yun, Junhee Kim, Hyojin Seung, Ja Hoon Koo, Taeghwan Hyeon & Dae-Hyeong Kim

  3. Department of Energy Science and Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu, Republic of Korea

    Won Seok Yu & Jiwoong Yang

  4. School of Mechanical Engineering, Pusan National University, Busan, Republic of Korea

    Ji Hoon Kim

  5. Department of Materials Science and Engineering, Seoul National University, Seoul, Republic of Korea

    Dae-Hyeong Kim

Authors
  1. Dong Chan Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Huiwon Yun
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Junhee Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Hyojin Seung
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Won Seok Yu
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Ja Hoon Koo
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Jiwoong Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Ji Hoon Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Taeghwan Hyeon
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. Dae-Hyeong Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

D.C.K., H.Y. and J.K. designed the experiments. D.C.K., H.Y., J.K. and H.S. performed the experiments and analysed the data. J.K., W.S.Y. and J.Y. synthesized and characterized the colloidal quantum dots described in this paper. D.C.K., H.Y. and H.S. made the QLEDs and performed the device characterization. J. H. Kim carried out the FEM calculation. D.C.K., H.Y., J.K., J. H. Koo, T.H. and D.-H.K. wrote the paper. All the authors discussed the results and commented on the manuscript.

Corresponding authors

Correspondence to Taeghwan Hyeon or Dae-Hyeong Kim.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Peer review information Nature Electronics thanks Yizheng Jin and Yihui Zhang for their contribution to the peer review of this work.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data

Extended Data Fig. 1 Fabrication and pre-programming process of the ultrathin QLED for its 3D controlled folding.

Panels i)-vi) show the step-by-step procedures. Illustrations at the bottom explain the partial etching and the complete etching for the formation of the folding line and the cutting line, respectively. After the selective laser etching, the fabricated QLED is peeled off from the substrate and rotated upside down. Then, by applying a compressive force, the partially-etched folding line can be folded into either a valley-shape or a mountain-shape.

Extended Data Fig. 2 3D surface topography profiles.

3D surface topographies were measured for the laser-etched ultrathin QLED with (1st column) or without (2nd column) the Ag etch-stop layer.

Extended Data Fig. 3 Scanning electron microscope (SEM) images of the folding line in the laser-etched device.

a-b, Front-side (a) and back-side (b) of the laser-etched ultrathin QLED with the Ag etch-stop layer. The folding line was etched under 6 mJ of the laser pulse intensity. In the front-side, the device was etched, while only a crease was formed along the laser-etched line in the back-side. c-d, Front-side (c) and back-side (d) of the laser-etched ultrathin QLED without the Ag etch-stop layer. As the device was completely etched under 4 mJ of the laser pulse intensity, the sample cut by the laser was transferred onto a carbon tape to acquire the SEM images (schematic illustration is shown in the inset).

Extended Data Fig. 4 Captured images from Supplementary Movie 1 that shows the bending and folding deformations of the QLED with the double etch-stop layers.

The device exhibits the outstanding mechanical stability even under mechanical deformations. Also, the foldable QLED is waterproof even after its sharp folding.

Extended Data Fig. 5 Depth-tunable etching with the double etch-stop layers.

a, Schematic illustration that shows the pre-programming condition with the double etch-stop layers to fabricate a 3D architecture with two distinct mountain-shape folds (that is, blunt fold and sharp fold). b, Schematic illustration of the 3D architecture after 3D folding of the pre-programmed ultrathin QLEDs. c-d, Photographs of the front-side (c) and the back-side (d) of the ultrathin QLEDs after the depth-tunable etching. e-f, Photographs of the 3D foldable QLEDs with two distinct mountain-shape folds (e). A magnified view in the red dotted box is shown in (f). Two mountain-shape folds have two different radii of curvature.

Extended Data Fig. 6 Mechanical analysis of the 3D foldable QLED with the double etch-stop layers.

a-c, Strain distributions of the deformed QLEDs (mountain-folded) with the double etch-stop layers, calculated by the FEA. The devices are either unetched (a) or etched by an etching depth of 5 μm (b) or etched by an etching depth of 10 μm (c). The cross-sectional diagrams on the left side exhibit the layered structure of the pre-programmed devices, and the data on the right side show the amount of strain applied to the device during the deformation and the location of the ITO layer and the neutral mechanical plane. In the graph, the thickness of the highlighted region is normalized to be from -1 to 1. The black, red, and blue plot in the graph correspond to the data for the device under the compressive strain of 50% (black line), 70% (red line), and 90% (blue line). In the case of (c), the neutral plane is located near the ITO layer.

Extended Data Fig. 7 Captured images from Supplementary Movie 2 that shows the 3D foldable QLEDs with customized architectures.

The planar QLEDs are pre-programmed with customized patterns of folding and cutting lines for their facile deformation into various 3D architectures. The 3D QLEDs show the stable light-emission performance even after mechanical deformations of folding-unfolding or squeezing, and even under water droplets.

Extended Data Fig. 8 Star-shaped 3D PM QLED array, displaying various image patterns.

a-d, Top view (middle) and side view (right) of the star-shaped PM QLED arrays, which demonstrate various patterns (left).

Extended Data Fig. 9 Captured images from Supplementary Movie 3 that shows the 3D foldable PM QLED array.

The 2D PM QLED array is pre-programmed with customized patterns to form a star-shaped structure. By folding the device along the pre-programmed folding lines, a star-shaped 3D PM QLED array is formed, showing stable light-emission performance during dynamic 2D-3D deformations.

Supplementary information

Supplementary Information  Supplementary Notes 1 and 2 and Figs. 1–10.

Supplementary Video 1

Bending and folding deformations of a pre-programmed QLED with double etch-stop layers.

Supplementary Video 2

Three-dimensional foldable QLEDs with customized architectures.

Supplementary Video 3

Three-dimensional foldable PM QLED array.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kim, D.C., Yun, H., Kim, J. et al. Three-dimensional foldable quantum dot light-emitting diodes. Nat Electron 4, 671–680 (2021). https://doi.org/10.1038/s41928-021-00643-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41928-021-00643-4

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing