Hexagonal boron nitride (hBN) has a large bandgap, high phonon energies and an atomically smooth surface absent of dangling bonds. As a result, it has been widely used as a dielectric to investigate electron physics in two-dimensional heterostructures and as a dielectric in the fabrication of two-dimensional transistors and optoelectronic devices. Here we show that hBN can be used to create analogue switches for applications in communication systems across radio, 5G and terahertz frequencies. Our approach relies on the non-volatile resistive switching capabilities of atomically thin hBN. The switches are composed of monolayer hBN sandwiched between two gold electrodes and exhibit a cutoff-frequency figure of merit of around 129 THz with a low insertion loss (≤0.5 dB) and high isolation (≥10 dB) from 0.1 to 200 GHz, as well as a high power handling (around 20 dBm) and nanosecond switching speeds, metrics that are superior to those of existing solid-state switches. Furthermore, the switches are 50 times more efficient than other non-volatile switches in terms of a d.c. energy-consumption metric, which is an important consideration for ubiquitous mobile systems. We also illustrate the potential of the hBN switches in a communication system with an 8.5 Gbit s–1 data transmission rate at 100 GHz with a low bit error rate under 10−10.
Subscribe to Journal
Get full journal access for 1 year
only $8.25 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Rent or Buy article
Get time limited or full article access on ReadCube.
All prices are NET prices.
The data that support the plots within this paper and other finding of this study are available from the corresponding author upon reasonable request.
Pi, S., Ghadiri-Sadrabadi, M., Bardin, J. C. & Xia, Q. Nanoscale memristive radiofrequency switches. Nat. Commun. 6, 7519 (2015).
Lee, J.-L., Zych, D., Reese, E. & Drury, D. M. Monolithic 2–18 GHz low loss, on-chip biased PIN diode switches. IEEE Trans. Microw. Theory Tech. 43, 250–256 (1995).
Larson, L. E. Integrated circuit technology options for RFICs—present status and future directions. IEEE J. Solid-State Circuits 33, 387–399 (1998).
Brown, E. R. RF-MEMS switches for reconfigurable integrated circuits. IEEE Trans. Microw. Theory Tech. 46, 1868–1880 (1998).
Yao, J. J. RF MEMS from a device perspective. J. Micromech. Microeng. 10, R9 (2000).
Li, Q., Zhang, Y. P., Yeo, K. S. & Lim, W. M. 16.6-and 28-GHz fully integrated CMOS RF switches with improved body floating. IEEE Trans. Microw. Theory Tech. 56, 339–345 (2008).
Stefanini, R., Chatras, M., Blondy, P. & Rebeiz, G. M. Miniature MEMS switches for RF applications. J. Microelectromech. Syst. 20, 1324–1335 (2011).
Patel, C. D. & Rebeiz, G. M. A compact RF MEMS metal-contact switch and switching networks. IEEE Microw. Wirel. Compon. Lett. 22, 642–644 (2012).
Wang, M. & Rais-Zadeh, M. Development and evaluation of germanium telluride phase change material based ohmic switches for RF applications. J. Micromech. Microeng. 27, 013001 (2017).
El-Hinnawy, N. et al. Origin and optimization of RF power handling limitations in inline phase-change switches. IEEE Trans. Electron Devices 64, 3934–3942 (2017).
Madan, H. et al. in 2015 IEEE International Electron Devices Meeting (IEDM) 9.3.1–9.3.4 (IEEE, 2015).
Olsson, R. H., Bunch, K. & Gordon, C. in 2016 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS) 1–4 IEEE (2016).
Wong, H. S. P. et al. Metal–oxide RRAM. Proc. IEEE 100, 1951–1970 (2012).
Wouters, D. J., Waser, R. & Wuttig, M. Phase-change and redox-based resistive switching memories. Proc. IEEE 103, 1274–1288 (2015).
Field, M. et al. in Proc. SPIE 9479 Open Architecture/Open Business Model Net-Centric Systems and Defense Transformation 2015 947908 (International Society for Optics and Photonics, 2015).
Ge, R. et al. Atomristor: nonvolatile resistance switching in atomic sheets of transition metal dichalcogenides. Nano Lett. 18, 434–441 (2018).
Kim, M. et al. Zero-static power radio-frequency switches based on MoS2 atomristors. Nat. Commun. 9, 2524 (2018).
Chappell, W. J., Hancock, T. M. & Olsson, R. H. in 2018 IEEE/MTT-S International Microwave Symposium—IMS) 829–831 (IEEE, 2018).
Léon, A. et al. RF power-handling performance for direct actuation of germanium telluride switches. IEEE Trans. Microw. Theory Tech. 68, 60–73 (2020).
Wu, X. et al. Thinnest nonvolatile memory based on monolayer h‐BN. Adv. Mater. 31, 1806790 (2019).
Shi, Y. et al. Electronic synapses made of layered two-dimensional materials. Nat. Electron. 1, 458 (2018).
Zhao, H. et al. Atomically thin femtojoule memristive device. Adv. Mater. 29, 1703232 (2017).
Zhang, C. J. et al. Key technology for 5G new radio. IEEE Commun. Mag. 56, 10–11 (2018).
Ge, R. et al. in 2018 IEEE International Electron Devices Meeting (IEDM) 22.6.1–22.6.4 (IEEE, 2018).
Lee, Y. H. et al. Synthesis and transfer of single-layer transition metal disulfides on diverse surfaces. Nano Lett. 13, 1852–1857 (2013).
Cha, J., Cha, J. & Lee, S. Uncertainty analysis of two-step and three-step methods for deembedding on-wafer RF transistor measurements. IEEE Trans. Electron Devices 55, 2195–2201 (2008).
Liu, A.-Q. RF MEMS Switches and Integrated Switching Circuits (Springer Science & Business Media, 2010).
Li, L. H. & Chen, Y. Atomically thin boron nitride: unique properties and applications. Adv. Funct. Mater. 26, 2594–2608 (2016).
Nagatsuma, T., Ducournau, G. & Renaud, C. C. Advances in terahertz communications accelerated by photonics. Nat. Photon. 10, 371–379 (2016).
Kim, K. K. et al. Synthesis of monolayer hexagonal boron nitride on Cu foil using chemical vapor deposition. Nano Lett. 12, 161–166 (2012).
Application Note on Wafer Vector Network Analyzer Calibration and Measurements (Cascade Microtech, 1997).
This work was supported in part by the Office of Naval Research grant N00014-20-1-2104, the National Science Foundation (NSF) grant no. 1809017 and Engineering Research Center Cooperative Agreement no. EEC-1160494. D.A. acknowledges the Presidential Early Career Award for Scientists and Engineers (PECASE) through the Army Research Office Award no. W911NF-16-1-0277. The fabrication was partly done at the Texas Nanofabrication Facility supported by NSF grant NNCI-1542159. hBN samples were kindly provided by Grolltex, Inc. The characterization part of this work was partly supported by the European Union’s Horizon 2020 research and innovation programme under the phase of the Graphene Flagship GrapheneCore2 785219, by an ANR TERASONIC grant (17-CE24) and by the CPER Photonics for Society, the Hauts-de-France regional council and the TERIL-WAVES project (I-Site ULNE and MEL).
The authors declare no competing interests.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Kim, M., Pallecchi, E., Ge, R. et al. Analogue switches made from boron nitride monolayers for application in 5G and terahertz communication systems. Nat Electron 3, 479–485 (2020). https://doi.org/10.1038/s41928-020-0416-x
npj 2D Materials and Applications (2021)
Scalable massively parallel computing using continuous-time data representation in nanoscale crossbar array
Nature Nanotechnology (2021)
Nature Electronics (2020)