Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Touchscreen tags based on thin-film electronics for the Internet of Everything


Capacitive touchscreens are increasingly widespread, featuring in mobile phones and tablets, as well as everyday objects such as cars and home appliances. As a result, the interfaces are uniquely placed to provide a means of communication in the era of the Internet of Everything. Here, we show that commercial touchscreens can be used as reader interfaces for capacitive coupled data transfer. The transfer of data to the touchscreen is achieved using a 12 bit thin-film capacitive radio-frequency identification tag powered by a thin-film battery or a thin-film photovoltaic cell that converts light from the screen. The thin-film integrated circuit has a 0.8 cm2 on-chip monolithic antenna, employs 439 transistors and dissipates only 31 nW of power at a supply voltage of 600 mV. The chip has an asynchronous data rate of up to 36 bps, which is limited by the touchscreen readout electronics.

This is a preview of subscription content, access via your institution

Access options

Buy this article

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Self-aligned metal–oxide TFT technology.
Fig. 2: Stack and characterization data of the perovskite solar cells.
Fig. 3: High-level C-touch system block diagrams.
Fig. 4: Technical data of the circuit blocks of the C-touch tag.
Fig. 5: Photographs of a flexible touchscreen tag connected to a flexible battery on an iPhone touchscreen.
Fig. 6: Extracted location data from experiments with the C-touch tag performed with various phones.

Similar content being viewed by others

Data availability

The data that support the plots within this paper and other findings of this study are available from the corresponding author upon reasonable request.


  1. Cantatore, E. et al. A 13.56 MHz RFID system based on organic transponders. IEEE J. Solid-State Circ. 42, 84–92 (2007).

    Article  Google Scholar 

  2. Papadopoulos, N. et al. 2-D smart surface object localization by flexible 160-nW monolithic capacitively coupled 12-b identification tags based on metal-oxide TFTs. IEEE Trans. Electron Devices 65, 4861–4867 (2018).

    Article  Google Scholar 

  3. Papadopoulos, N. et al. 1 cm2 sub-1 V capacitive-coupled thin film ID-tag using metal-oxide TFTs on flexible substrate. In 2018 International Flexible Electronics Technology Conference (IFETC) 1–2 (IEEE, 2018);

  4. Hung, M.-H. et al. Ultra low voltage 1-V RFID tag implemented in a­-IGZO TFT technology on plastic. In IEEE International Conference on RFID 5 (IEEE, 2017).

  5. Myny, K. The development of flexible integrated circuits based on thin-film transistors. Nat. Electron. 1, 30–39 (2018).

    Article  Google Scholar 

  6. Yang, B.-D. A transparent logic circuit for RFID tag in a-IGZO TFT technology. ETRI J. 35, 610–616 (2013).

    Article  Google Scholar 

  7. Myny, K., Tripathi, A. K., van der Steen, J.-L. & Cobb, B. Flexible thin-film NFC tags. IEEE Commun. Mag. 53, 182–189 (2015).

    Article  Google Scholar 

  8. Klauk, H., Zschieschang, U., Pflaum, J. & Halik, M. Ultralow-power organic complementary circuits. Nature 445, 745–748 (2007).

    Article  Google Scholar 

  9. Ke, T.-H. et al. Scaling down of organic complementary logic gates for compact logic on foil. Org. Electron. 15, 1229–1234 (2014).

    Article  Google Scholar 

  10. Myny, K. et al. 15.2 A flexible ISO14443-A compliant 7.5 mW 128 b metal-oxide NFC barcode tag with direct clock division circuit from 13.56 MHz carrier. In 2017 IEEE International Solid-State Circuits Conference (ISSCC) 258–259 (IEEE, 2017);

  11. Villar, N. et al. Project Zanzibar: a portable and flexible tangible interaction platform. In Proc. 2018 CHI Conference on Human Factors in Computing Systems—CHI 18 1–13 (ACM Press, 2018).

  12. JOHNSON, E. A. Touch displays: a programmed man-machine interface. Ergonomics 10, 271–277 (1967).

    Article  Google Scholar 

  13. Vu, T. et al. Capacitive touch communication: a technique to input data through devices’ touch screen. IEEE Trans. Mob. Comput. 13, 4–19 (2014).

    Article  Google Scholar 

  14. Coni, P., Perbet, J.-N., Augros, L., Abadie, J. C. & Sontag, Y. 6.1: a new application of a touch screen display for data transfer. SID Symp. Dig. Tech. Pap. 46, 37–40 (2015).

    Article  Google Scholar 

  15. Yu, N.-H. et al. TUIC: enabling tangible interaction on capacitive multi-touch displays. In Proc. 2011 Annual Conference on Human Factors in Computing Systems—CHI ’11 2995 (ACM Press, 2011).

  16. Kubitza, T., Pohl, N., Dingler, T. & Schmidt, A. WebClip: a connector for ubiquitous physical input and output for touch screen devices. In Proc. 2013 ACM International Joint Conference on Pervasive and Ubiquitous Computing—UbiComp ’13 387 (ACM Press, 2013).

  17. Xiao, F., Wang, Z., Ye, N., Wang, R. & Li, X.-Y. One more tag enables fine-grained RFID localization and tracking. IEEE ACM Trans. Netw. 26, 161–174 (2018).

    Article  Google Scholar 

  18. Kronemeijer, A. J. et al. P-127: dual-gate self-aligned IGZO TFTs monolithically integrated with high-temperature bottom moisture barrier for flexible AMOLED. SID Symp. Dig. Tech. Pap. 49, 1577–1580 (2018).

    Article  Google Scholar 

  19. Qiu, W. et al. High efficiency perovskite solar cells using a PCBM/ZnO double electron transport layer and a short air-aging step. Org. Electron. 26, 30–35 (2015).

    Article  Google Scholar 

  20. Qiu, W. et al. An interdiffusion method for highly performing cesium/formamidinium double cation perovskites. Adv. Funct. Mater. 27, 1700920 (2017).

    Article  Google Scholar 

  21. Walker, G. A review of technologies for sensing contact location on the surface of a display: review of touch technologies. J. Soc. Inf. Disp. 20, 413–440 (2012).

    Article  Google Scholar 

  22. Barrett, G. & Omote, R. Projected-Capacitive Touch Technology. Inform. Display 26, 16–21 (2010).

    Article  Google Scholar 

  23. Jang, Y.-S. et al. P-181: a charge-share-based relative read-out circuit for capacitance sensing. SID Symp. Dig. Tech. Pap. 41, 1937–1939 (2010).

    Article  Google Scholar 

  24. Hamaguchi, M., Nagao, A. & Miyamoto, M. 12.3 A 240 Hz-reporting-rate 143×81 mutual-capacitance touch-sensing analog front-end IC with 37 dB SNR for 1 mm-diameter stylus. In 2014 IEEE International Solid-State Circuits Conference Digest of Technical Papers (ISSCC) 214–215 (IEEE, 2014).

  25. Jun, J. et al. In-cell self-capacitive-type mobile touch system and embedded readout circuit in display driver IC. J. Disp. Technol. 12, 1613–1622 (2016).

    Article  Google Scholar 

  26. An, J., Jung, S., Hong, S. & Kwon, O. A highly noise-immune capacitive touch sensing system using an adaptive chopper stabilization method. IEEE Sens. J. 17, 803–811 (2017).

    Article  Google Scholar 

  27. Peumans, P., Yakimov, A. & Forrest, S. R. Small molecular weight organic thin-film photodetectors and solar cells. J. Appl. Phys. 93, 3693–3723 (2003).

    Article  Google Scholar 

  28. Cui, Y. et al. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages. Nat. Commun. 10, 2515 (2019).

    Article  Google Scholar 

  29. Tress, W. et al. Interpretation and evolution of open-circuit voltage, recombination, ideality factor and subgap defect states during reversible light-soaking and irreversible degradation of perovskite solar cells. Energy Environ. Sci. 11, 151–165 (2018).

    Article  Google Scholar 

  30. Huang, T.-C. et al. Pseudo-CMOS: a design style for low-cost and robust flexible electronics. IEEE Trans. Electron Devices 58, 141–150 (2011).

    Article  Google Scholar 

Download references


We thank the process engineers of Holst Centre’s GEN1 Pilot Line for fabricating the circuits presented in this paper. This work received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme under grant agreements 732389 (CAPID project) and 716426 (FLICs project). Part of this work is financed through the Flexlines project within the Interreg V-programme Flanders, The Netherlands, a cross-border cooperation programme with financial support from the European Regional Development Fund, and co-financed by the Province of Noord-Brabant, The Netherlands. W.Q. acknowledges financial support from a postdoctoral researcher grant (12Z4618N) from Research Foundation Flanders (FWO), Belgium.

Author information

Authors and Affiliations



N.P. and K.M. conceived, conducted and analysed the experiment(s). M.A. conceived experiments. R.G. and W.Q. conducted the TFPV analysis and fabrication. F.D. developed the apps. S.S., M.W. A.J.K and J.-L.v.d.S. conducted the fabrication. M.D. and A.M. conceived the applications. All authors reviewed the manuscript.

Corresponding author

Correspondence to Kris Myny.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Papadopoulos, N., Qiu, W., Ameys, M. et al. Touchscreen tags based on thin-film electronics for the Internet of Everything. Nat Electron 2, 606–611 (2019).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI:

This article is cited by


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing