The importance of open and frugal labware

Expensive equipment is often considered a prerequisite for good science. But the development of technology that is affordable and accessible to many could help promote a greater diversity of scientific thinking.

Access options

Rent or Buy article

Get time limited or full article access on ReadCube.

from$8.99

All prices are NET prices.

Fig. 1: Open labware for soft electronics and robotics.

References

  1. 1.

    Whitesides, G. M. The frugal way. The Economist (17 November 2011).

  2. 2.

    Yang, S. et al. Adv. Mater. 27, 6423–6430 (2015).

    Article  Google Scholar 

  3. 3.

    Kim, D. et al. Science 333, 838–843 (2011).

    Article  Google Scholar 

  4. 4.

    Wirthl, D. et al. Sci. Adv. 3, e1700053 (2017).

    Article  Google Scholar 

  5. 5.

    Kaltenbrunner, M. et al. Nature 499, 458–463 (2013).

    Article  Google Scholar 

  6. 6.

    Koh, A. et al. Sci. Transl. Med. 8, 366ra165 (2016).

    Article  Google Scholar 

  7. 7.

    Ilievski, F. et al. Angew. Chem. Int. Ed. 123, 1930–1935 (2011).

  8. 8.

    Hartmann, F. et al. Sci. Robot. 3, eaat9091 (2018).

    Article  Google Scholar 

  9. 9.

    Tobjörk, D. & Österbacka, R. Adv. Mater. 23, 1935–1961 (2011).

    Article  Google Scholar 

  10. 10.

    Thingiverse (Makerbot Industries, 2018); https://www.thingiverse.com/

  11. 11.

    OSHWA — Open Source Hardware Association (2018); https://www.oshwa.org/

  12. 12.

    Moser, R. et al. Adv. Sci. 3, 1500396 (2016).

    Article  Google Scholar 

  13. 13.

    Schausberger, S. E. et al. IEEE Access 3, 556–561 (2015).

    Article  Google Scholar 

  14. 14.

    RSS — Radial Stretching System; http://www.somap.jku.at/rss/

  15. 15.

    TTT — Toy-Brick Tensile Tester; http://www.somap.jku.at/ltt/

  16. 16.

    Soft Robotics Toolkit; https://softroboticstoolkit.com/

  17. 17.

    Pearce, J. M. Open-Source Lab: How to Build Your Own Hardware and Reduce Research Costs (Newnes, Oxford, 2013).

  18. 18.

    Lipson, H. & Kurman, M. Fabricated: The New World of 3D Printing (Wiley, Indianapolis, 2013).

  19. 19.

    Truby, R. L. & Lewis, J. A. Nature 540, 371–378 (2016).

    Article  Google Scholar 

  20. 20.

    Wehner, M. et al. Nature 536, 451–455 (2016).

    Article  Google Scholar 

  21. 21.

    Dickey, M. D. Adv. Mater. 29, 27 (2017).

    Article  Google Scholar 

  22. 22.

    Open-source lab. Appropedia (2018); http://www.appropedia.org/Open-source_Lab

  23. 23.

    Hsieh, T. et al. Int. J. Automation Smart Technol. 4, 113–121 (2013).

    Google Scholar 

  24. 24.

    Chao, L. S. et al. Am. J. Phys. 83, 913–922 (2015).

    Article  Google Scholar 

Download references

Acknowledgements

This work was supported by the European Research Council Starting Grant ‘GEL-SYS’ (grant agreement no. 757931) and a start-up grant of the Linz Institute of Technology (grant agreement no. LIT013144001SEL).

Author information

Affiliations

Authors

Corresponding author

Correspondence to Martin Kaltenbrunner.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Drack, M., Hartmann, F., Bauer, S. et al. The importance of open and frugal labware. Nat Electron 1, 484–486 (2018). https://doi.org/10.1038/s41928-018-0133-x

Download citation

Further reading

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing