Article | Published:

A stretchable and biodegradable strain and pressure sensor for orthopaedic application

Nature Electronicsvolume 1pages314321 (2018) | Download Citation


The ability to monitor, in real time, the mechanical forces on tendons after surgical repair could allow personalized rehabilitation programmes to be developed for recovering patients. However, the development of devices capable of such measurements has been hindered by the strict requirements of biocompatible materials and the need for sensors with satisfactory performance. Here we report an implantable pressure and strain sensor made entirely of biodegradable materials. The sensor is designed to degrade after its useful lifetime, eliminating the need for a second surgery to remove the device. It can measure strain and pressure independently using two vertically isolated sensors capable of discriminating strain as small as 0.4% and the pressure exerted by a grain of salt (12 Pa), without them interfering with one another. The device has minimal hysteresis, a response time in the millisecond range, and an excellent cycling stability for strain and pressure sensing, respectively. We have incorporated a biodegradable elastomer optimized to improve the strain cycling performances by 54%. An in vivo study shows that the sensor exhibits excellent biocompatibility and function in a rat model, illustrating the potential applicability of the device to the real-time monitoring of tendon healing.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.


All prices are NET prices.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.


  1. 1.

    Yang, G., Rothrauff, B. B. & Tuan, R. S. Tendon and ligament regeneration and repair: clinical relevance and developmental paradigm. Birth Defects Res C. Embryo Today 99, 203–222 (2013).

  2. 2.

    Place, E. S., Evans, N. D. & Stevens, M. M. Complexity in biomaterials for tissue engineering. Nat. Mater. 8, 457–470 (2009).

  3. 3.

    McGilvray, K. C. et al. Implantable microelectromechanical sensors for diagnostic monitoring and post-surgical prediction of bone fracture healing. J. Orthop. Res. 33, 1439–1446 (2015).

  4. 4.

    Bogaerts, S., Desmet, H., Slagmolen, P. & Peers, K. Strain mapping in the Achilles tendon—a systematic review. J. Biomech. 49, 1411–1419 (2016).

  5. 5.

    Roriz, P. et al. From conventional sensors to fibre optic sensors for strain and force measurements in biomechanics applications: a review. J. Biomech. 47, 1251–1261 (2014).

  6. 6.

    Kubo, K., Kanehisa, H., Kawakami, Y. & Fukunaga, T. Influence of static stretching on viscoelastic properties of human tendon structure in vivo. J. Appl. Physiol. 90, 520–527 (2001).

  7. 7.

    Waugh, C. M., Blazevich, A. J., Fath, F. & Korff, T. Age-related changes in mechanical properties of the Achilles tendon. J. Anat. 220, 144–155 (2012).

  8. 8.

    Boutry, C. M. et al. A sensitive and biodegradable pressure sensor array for cardiovascular monitoring. Adv. Mater. 27, 6954–6961 (2015).

  9. 9.

    Luo, M., Martinez, A. W., Song, C., Herrault, F. & Allen, M. G. A microfabricated wireless RF pressure sensor made completely of biodegradable materials. J. Micro. Syst. 23, 4–13 (2014).

  10. 10.

    Hwang, S. W. et al. A physically transient form of silicon electronics. Science 28, 1640–1644 (2012).

  11. 11.

    Xu, L. et al. 3D multifunctional integumentary membranes for spatiotemporal cardiac measurements and stimulation across the entire epicardium. Nat. Commun. 5, 3329 (2014).

  12. 12.

    Liu, Y., Chakrabartty, S., Stamatis Gkinosatis, D., Mohanty, A. K. & Lajnef, N. Multi-walled carbon nanotubes/poly(L-lactide) nanocomposite strain sensor for biomechanical implants. Biomedical Circuits and Systems Conference BIOCAS 2007 119–122 (2007).

  13. 13.

    Singh, S. & Singh Nalwa, H. Nanotechnology and health safety—toxicity and risk assessments of nanostructured materials on human health. J. Nanosci. Nanotechnol. 7, 3048–3070 (2007).

  14. 14.

    Hein, C., Wilton, P. & Wongworawat, M. D. Review of flexor tendon rehabilitation protocols following zone II repair. Crit. Rev. Phys. Rehabil. Med. 27, 11–18 (2015).

  15. 15.

    Saini, N., Kundnani, V., Patni, P. & Gupta, S. P. Outcome of early active mobilization after flexor tendons repair in zones II–V in hand. Indian J. Orthop. 44, 314–321 (2010).

  16. 16.

    Mannsfeld, S. C. B. et al. Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers. Nat. Mater. 9, 859–864 (2010).

  17. 17.

    Wang, Y., Ameer, G. A., Sheppard, B. J. & Langer, R. Atough biodegradable elastomer. Nat. Biotechnol. 20, 602–606 (2002).

  18. 18.

    Tran, R. T. et al. Synthesis and characterization of a biodegradable elastomer featuring a dual crosslinking mechanism. Soft Matter 6, 2449–2461 (2010).

  19. 19.

    Zhang, B. et al. Biodegradable scaffold with built-in vasculature for organ-on-a-chip engineering and direct surgical anastomosis. Nat. Mater. 15, 669–678 (2016).

  20. 20.

    Davenport Huyer, L. et al. Highly elastic and moldable polyester biomaterial for cardiac tissue engineering applications. ACS Biomater. Sci. Eng. 2, 780–788 (2016).

  21. 21.

    Purnama, A., Hermawan, H. & Mantovani, D. Biodegradable metal stents: a focused review on materials and clinical studies. J. Biomater. Tissue Eng. 7, 868–874 (2014).

  22. 22.

    Zheng, Y. F., Gu, X. N. & Witte, F. Biodegradable metals. Mater. Sci. Eng. R. 77, 1–34 (2014).

  23. 23.

    Yin, L. et al. Dissolvable metals for transient electronics. Adv. Funct. Mater. 24, 645–658 (2014).

  24. 24.

    Huang, H., Zhang, J., Sun, K., Zhang, X. & Tian, S. Effects of repetitive multiple freeze–thaw cycles on the biomechanical properties of human flexor digitorum superficialis and flexor pollicis longus tendons. Clin. Biomech. 26, 419–423 (2011).

  25. 25.

    Rai, R., Tallawi, M., Grigore, A. & Boccaccini, A. R. Synthesis, properties and biomedical applications of poly(glycerol sebacate) (PGS): a review. Prog. Polym. Sci. 37, 1051–1078 (2012).

  26. 26.

    Kapnisi, M., Mawad, D., Rathnayake-Arachchige, D., Conway, P. & Stevens, M. Auxetic micropatterning of a cell adhesive-conductive composite for cardiac tissue engineering. Proc. San Francisco MRS LL02.02 (2015).

  27. 27.

    Bannister, M. & Ah-See, K. W. Enhanced recovery programmes in head and neck surgery: systematic review. J. Laryngol. Otol. 129, 416–420 (2015).

  28. 28.

    Pour Aryan, N, Kaim, H. & Rothermel, A. Stimulation and Recording Electrodes for Neural Prostheses (Springer, New York, USA, 2015).

Download references


C.M.B. acknowledges postdoctoral fellowship support from the Swiss National Science Foundation (Postdoc Mobility Fellowship no. P2EZP2_152118) and the European Commission (Marie-Curie International Outgoing Fellowship grant no. 622362). Part of this work was performed at the Stanford Nano Shared Facilities (SNSF), supported by the National Science Foundation under award ECCS-1542152. B.C.S. acknowledges the National Research Fund of Luxembourg for financial support (project no. 6932623).

Author information


  1. Department of Chemical Engineering, Stanford University, Stanford, CA, USA

    • Clementine M. Boutry
    • , Alex Chortos
    •  & Zhenan Bao
  2. Division of Plastic & Reconstructive Surgery, Stanford University Medical Center, Veterans Affairs Palo Alto, Palo Alto, CA, USA

    • Yukitoshi Kaizawa
    • , Anaïs Legrand
    • , Zhen Wang
    • , James Chang
    •  & Paige Fox
  3. Department of Chemistry, University College London, London, UK

    • Bob C. Schroeder


  1. Search for Clementine M. Boutry in:

  2. Search for Yukitoshi Kaizawa in:

  3. Search for Bob C. Schroeder in:

  4. Search for Alex Chortos in:

  5. Search for Anaïs Legrand in:

  6. Search for Zhen Wang in:

  7. Search for James Chang in:

  8. Search for Paige Fox in:

  9. Search for Zhenan Bao in:


C.M.B. is the main contributor to this work, elaborating the sensor concept, developing new fabrication processes, performing all experiments for materials investigations, device characterization, data collection for in vitro and in vivo experiments, data analysis and interpretation, and drafting of the article. B.C.S. contributed to the POMaC investigation, including polymer synthesis, chemical properties characterization, data analysis and interpretation, and provided critical revision of the article. A.C. contributed to the drafting of the article and provided critical revision. Y.K. performed all surgeries related to the in vivo studies, including design of the in vivo studies, development of the protocols, sensors implantation and operation studies, and materials biocompatibility studies. He also worked on data analysis and interpretation, and contributed to the drafting and critical revision of the article. A.L. performed all surgeries related to the tendon in vitro studies, and worked on data analysis and interpretation. Z.W., J.C. and P.F. contributed to the design of the in vivo studies, working on the protocols and data interpretation. P.F. also contributed to the drafting and critical revision of the article. Z.B. contributed to developing the sensor concept, fabrication processes and materials investigation, device characterization, data interpretation and critical revision of the article.

Competing interests

The authors declare no competing interests.

Corresponding authors

Correspondence to Paige Fox or Zhenan Bao.

Supplementary information

About this article

Publication history