Thermal performance evaluation of bio-bricks and conventional bricks in residential buildings in Aswan city, Egypt

From raw material extraction to final product disposal, the construction industry is integrally involved in every stage of the greenhouse gas emissions life cycle. One of the main causes of the climate catastrophe is the increasing use of polluting energy sources to power our homes and businesses. This massive problem of global warming has now forced countries to act. To further address sustainability, they seek to reduce energy consumption and CO2 emissions by adopting more sustainable materials. The current trend in scientific research is to use waste resources to improve the properties of various materials to exacerbate the problems of climate change because of the use of traditional building materials. Therefore, one of the most environmentally friendly alternatives to the standard procedure is the use of agricultural residues to improve the quality of building materials. This improvement will modify the thermal properties of building materials such as bricks, which will lead to an improvement in energy efficiency inside buildings, especially residential buildings. As a result, the research focused solely on simulating several bio-brick alternatives that had been discovered in earlier studies in order to test their viability in terms of increasing the energy efficiency of residential buildings in one of the hot cities. The study demonstrated that using bio-building materials can lower energy usage. In addition to saving energy in residential constructions, rice straw cement bricks and sugarcane bricks have operating efficiency rates of roughly 7% and 12%, respectively. All these advancements over conventional brick reduce greenhouse gas emissions and carbon dioxide.


Thermal performance evaluation of bio-bricks and conventional bricks in residential buildings in Aswan city, Egypt
Rania Emad Abd El-Hady 1* & Abdelaziz Farouk A. Mohamed 2* From raw material extraction to final product disposal, the construction industry is integrally involved in every stage of the greenhouse gas emissions life cycle.One of the main causes of the climate catastrophe is the increasing use of polluting energy sources to power our homes and businesses.This massive problem of global warming has now forced countries to act.To further address sustainability, they seek to reduce energy consumption and CO 2 emissions by adopting more sustainable materials.The current trend in scientific research is to use waste resources to improve the properties of various materials to exacerbate the problems of climate change because of the use of traditional building materials.Therefore, one of the most environmentally friendly alternatives to the standard procedure is the use of agricultural residues to improve the quality of building materials.This improvement will modify the thermal properties of building materials such as bricks, which will lead to an improvement in energy efficiency inside buildings, especially residential buildings.As a result, the research focused solely on simulating several bio-brick alternatives that had been discovered in earlier studies in order to test their viability in terms of increasing the energy efficiency of residential buildings in one of the hot cities.The study demonstrated that using bio-building materials can lower energy usage.In addition to saving energy in residential constructions, rice straw cement bricks and sugarcane bricks have operating efficiency rates of roughly 7% and 12%, respectively.All these advancements over conventional brick reduce greenhouse gas emissions and carbon dioxide.
The concentration of atmospheric greenhouse gases (GHGs) is being amplified by human activity.With the continuous increase in the world's population, the problems related to using raw materials increased, leading to an environmental imbalance.However, in recent years, environmental issues have not been reduced to this, but awareness has increased.As a result, the extent of the built environment's impact on environmental problems is known 1 .So, Nowadays, countries care about the global warming problem and the greenhouse effect, which acts actively on our plants.So now researchers study reasons for environmental pollution and greenhouse effects to face risks (climate change, urban heat islands, etc.).Globally, buildings play a crucial role in the use of energy.The construction industry considerably impacts overall natural resource usage and emissions 2,3 .The increase in waste creation is a consequence of population growth, which has a direct impact on both the environment and the economy.In recent times, agricultural residues have emerged as a notable contributor to environmental contamination.The indiscriminate incineration of agricultural waste, such as straw and livestock manure, within the context of an agrarian nation, has resulted in a multitude of environmental issues.The escalating volume of garbage and its improper disposal, particularly in developing nations, have consistently posed a significant threat to the safety of the environment and the health of its inhabitants.Additionally, this issue has exacerbated the contribution of these countries to the global emission of greenhouse gases 4 .Since the beginning of the twentieth century, Construction has become entirely dependent on concrete structures and fired clay bricks, whose manufacture leads to the emission of enormous quantities of greenhouse gases.Moreover, despite their high compressive properties, their thermal properties are poor, leading to an increase in microclimate problems.The operational energy reduction is achieved by substantially increasing the insulating materials.So, a possible strategy to counterbalance this effect is to select building materials with low embodied energy; in this respect,

Bio-building materials properties
Due to their durability and adaptability, bio-based materials are considered valuable construction resources in the twenty-first century.They can be manufactured locally and sustainably, with little shipping expenditure.Moreover, it has been found that this biomaterial is an excellent replacement for traditional materials because it reduces carbon and energy emissions and offers thermal comfort with reduced energy consumption for the operation of buildings 6,7 .
Several researchers have combined waste materials such as organic waste, waste treatment sludge, fly ash, cigarette butts, rice husk, and processed waste tea into a fired clay brick.This application suggests a way to use waste materials with little environmental impact [8][9][10][11] .Researchers in Sri Lanka discovered brick with new properties by adding cow dung ash to the mixture to decrease manufacturing costs and make it a more durable and eco-friendly clay brick.The best ratio for adding waste was 10%, which improved the properties of conventional brick as shown (density from 1450 to 1447 kg/m 3 , water absorption from 12 to 14.5%, and thermal conductivity from 0.85 to 0.2 W/m.k) 12 .

Environmental challenges in Egypt
The increase in greenhouse emissions in the world and Egypt resulted in climate change and a marked rise in temperatures, and as a result, the climate affected human health in three ways: a direct effect through weather variables such as heat and storms; and indirectly through natural systems such as disease vectors and pathways caused by human systems such as undernutrition 13,14 .One of the effects of high temperatures is the deaths, injuries, and psychological trauma to which humans are exposed because of extreme natural phenomena, as well as increased respiratory infections, diarrhea, and vascular and heart diseases 14 .Also, due to the environmental deterioration that has been reached, the road has paved the way for viral epidemics transmitted from animal sources 15 .
The construction sector is one of the critical sectors in the economy of any country, whether it is developed or developing.Therefore, this sector is considered to have an important and prominent position in developing countries' national economies.It undertakes the implementation and establishment of all industrial, agricultural, tourism, infrastructure, and public utility projects and other projects necessary for the comprehensive development of these countries.It is known that the construction industry in Egypt is ancient 16 .

Energy efficiency in Egypt
According to the latest report of the Electricity Holding Company for 2020/2021, Electricity consumed in distribution is 40.5% inside residential buildings, 13% in commercial buildings, 4.8% in government buildings, 27.3% in industry, 5.2% in agriculture, and 9.2% in other buildings as shown in Fig. 1.This percentage is a warning

Construction sector in Egypt
The construction sector in Egypt is one of the largest and most dynamic sectors in the national economy.It is essential to economic growth through sector relationships, development plans, and various economic activities.Since 2016, the Egyptian government has paid attention to the construction sector since the launch of the economic reform program until the construction sector contributes to the growth of real GDP from 6.3% for the year 2018-2019 to 6.8% for 2020-2021.It is expected that the amount of its contribution to economic growth will increase by 8.5% for the years 2021-2022 as shown in Fig. 2 18 .
According to the annual report of the Mobilization and Statistics Authority for the year 2018/2019, the number of projects that have been completed in the construction sector equals 38,830 million pounds, and building projects represent about 83% of the total completed projects as shown in Fig. 3 19 .
According to the interest of the Egyptian government in the construction sector through increasing national projects, the construction sector has become one of the most influential industrial sectors in recent years 20 .
Egypt enjoys many mineral resources, which are the raw materials for building materials, contributing significantly to the Egyptian economy.They are found in large quantities on the upper surface of the Earth's layers, making their extraction and exploitation easy 20 .

Agriculture problems in Egypt
According to the report of the Mobilization and Statistics Authority for the year 2018/2019, the total production of field crops reached 118,486,134 tons, and it included many types of crops, including wheat, barley, corn, rice,  www.nature.com/scientificreports/legumes, sugar cane, fodder, cotton, and others.According to Omyma Swan, each ton of crop yield generates from 5 to 6 tons of waste, considered an untapped revolution 21 .Agriculture in Egypt produces annually 33.477 million tons.However, more than 50% are not used.which can be exploited in several industries 21,22 .

Case study: applying bio-brick in residential building in Aswan Egypt
The case study was selected in Aswan (a hot, arid region) to test the effect of modified bricks on thermal comfort in a residential building by reducing the heat gain from walls.The per capita share of green lands is about 0.7 m 2 / person and 5.3 m 2 /person, including the agricultural area north of Aswan city 23 .The case study shows the district covers (0.12 km 2 ) area, with built up about 40% of the total area as shown in Fig. 4, and the average building height is 18 m.All structures were constructed using traditional materials as shown in Fig. 5.
On the warmest day in Aswan, which occurred on June 5, the climate of the region under investigation was determined.The yearly maximum and lowest temperatures are 47 °C and 29.5 °C, respectively.To evaluate the impact of bio-bricks in thermal insulation in a hot, arid climate that helped in achieving thermal comfort inside residential buildings without using mechanical facilities, the Onset-HOBO-MX1104 (Analogue/e/Temp/R.H./ Light Data Logger) was used daily for 3 months (July, August, and September) to record the actual temperature and humidity in urban areas.
Using Design-Builder energy simulation 5.5 software, compare the amount of heat gained or lost within a structure constructed with conventional bricks (default Scenario used as a reference brick) vs. rice straw-cement bricks and sugarcane bagasse bricks.These types of bio-bricks were chosen because of the availability of these crops in Upper Egypt, in particular.Therefore, the use of its residues will be considered self-sufficiency in the brick industry.to determine the thermal conductivity of bricks with fixed other variables.Note that utilizing the EPW file for the city of Aswan in different scenarios and installing all parameters such as the HVAC system (Fan Coil Unit(4-pipe), Air-cooled Chiller), opening size, and floor and roof layers are required as defined in Table 1 24 .

Simulate default scenarios
In the initial stage of this research, conventional brick (red-fired clay brick) is tested by preparing a model for one of the blocks in the case-study area with the existing material and original orientation to determine the amount of heat gain inside the residential unit through the construction material as shown in Fig. 6.According to the climate consultant software program, thermal comfort for users in Aswan City ranges from 19.5 to 26 °C.So, need to cool them to equal the amount of heat that has been gained through construction materials to achieve thermal comfort and health quality inside residential units.The amount of CO 2 emitted because of using electricity to cool the building will rise due to this increased need for cooling as shown in Figs.7 and 8. Bricks play a crucial role in air conditioning.The wall substantially impacts heat transmission and embodied carbon (kgCO 2 ), as shown in Table 2 25 .

Simulate rice straw-cement brick scenario
In this stage, the outer skin of the structure (Bricks) is improved by using rice plant agriculture waste to generate rice straw-cement bricks with conductivity 0.41 (W/m-k) and density 884 (Kg/m3) 26 .Figure 9 demonstrates that using rice straw-cement bricks reduce the heat transfer through walls, and the heat balance graph of walls becomes smoother than in the Default Scenario, minimizing the disparity between values, reducing the need to use air-conditioning to cool units, as shown in Fig. 10, and reducing embodied carbon (kgCO 2 ) as shown in Fig. 11.On the other side, it will help to enhance the environment by reducing the burning of rice straw, which causes black clouds in Egypt, according to Omayma's study about agricultural waste, more than 70% of rice straw is not used, and it generates about 3.6 million tons annually 3 .

Simulate sugarcane bagasse brick scenario
At this stage, the outer shell of the structure (bricks) is improved using sugarcane plant residues as a result of several previous studies that studied the physical properties of sugarcane 27 residues to generate sugarcane bricks with a conductivity of 0.27 (W/m-k) and a density of 424 (Kg/m3).Figure 12 demonstrates that using sugarcane bagasse bricks reduces the heat transfer through walls, and the heat balance graph of walls becomes smoother than in the Default Scenario and rice-straw cement brick.and minimizing the disparity between values, reducing the need to use air-conditioning to cool units, as shown in Fig. 13, and reducing embodied carbon (kgCO 2 ) as shown in Fig. 14.Egypt generates annually about 5 tons of sugar bagasse cone.But it is an unexploited amount, but the amount of agricultural waste increases annually and is disposed of in non-environmental ways, such as burning it 3 .

Results and discussion
Based on the Results of the scenarios, which showed how little heat was gained through the walls designed with bio-bricks compared to those designed with traditional bricks.As seen in Fig. 15, increasing the thermal transmittance (U value) of a material will reduce CO 2 emissions and greenhouse gas (GHG) emissions, and will eliminate the need to cool interior structures.Figure 16 demonstrates that this form of bio-bricks (rice straw-cement bricks & sugarcane bagasse bricks) would reduce the energy consumption of interior buildings, as shown in Table 3.It is also considered an environmental solution for recycling agricultural waste, which Egypt enjoys, and a more economical solution than traditional bricks, because it is less expensive to manufacture than its counterpart and less expensive in the long run (operating).
According to Fig. 16 and Table 4, to calculate the life-cycle assessment of electricity consumption to determine the present value of electricity cost during 20 years for one block.So, assume the cost was calculated according to the inflation rate factor, then return the cost value in year number 20 to the present value to compare the electricity cost for various scenarios and calculate the saving in electricity bills in $ through 20 years as shown in Table 5 28,29 .
The financial value equivalent to the cost of electricity consumption for the building was evaluated for a period of 20 years, considering the inflation rate of Egypt in $, which reached 40.26%, based on the Central Bank of Egypt, in order to study the viability of using bio-brick instead of conventional bricks, which  resulted in a reduction in electricity consumption in residential buildings according to the following equation FutureValue = CostValue * (1 + inflationrate%).
To calculate the amount of savings in electricity bills, return the future cost value in the previous table to the present value using the following equation PresentValue = FutureValue (1+r) n .As shown in Table 6.

Conclusion
Structures cause about one-third of greenhouse gas emissions.This is because it symbolizes construction materials (bricks, concrete, tiles, etc.).After all, they need massive amounts of energy in different phases (manufacturing, mobility, construction, and operation), which increases the burden on the environment.These environmental problems increase the effects of climate change, which has become a reality of living.Therefore, all research efforts are focused on finding more environmentally bio-building materials with less harmful effects.So, this study  www.nature.com/scientificreports/aims to evaluate the findings of earlier laboratory studies to discover new kinds of modified and improved biobricks in terms of their thermal qualities.As a result, the results were put to the test by simulating the amount of electrical energy needed to cool the building.Considering that modelling software uses conventional materials to determine overall cooling loads, the use of biomaterials will cut CO 2 emissions.• Manufacturing has less impact on the surrounding environment than conventional methods.
• Developing a plan to dispose of agricultural waste without harming the environment.
• To improve the interior environment and human health, provide suggestions for using alternative building materials for more sustainable construction.• Increasing the thermal transmittance of materials will reduce residential buildings' power use.
To achieve self-sufficiency for the city in the construction sector and to develop new types of essential building materials with thermally improved properties to improve energy efficiency in various types, future studies will point researchers to the possibility of using the various types of waste that are generated in the city of Aswan and the possibility of recycling them in the manufacture of various building materials.structures in places with unique climate features (hot, arid areas) like Aswan.

Figure 2 .
Figure 2. Distribution of public investments for different sectors of the economy in Egypt in 2021/2020.

Figure 3 .
Figure 3. Distributed for construction section of economic activity for 2018/2019.

Figure 4 .
Figure 4. Case-study area google earth map (Google Earth Pro).

Figure 5 .
Figure 5.One of block design in existing case (Taken by Authors).

Figure 6 .
Figure 6.Heat transfer through construction elements.

Figure 7 .
Figure 7. Distribution of electricity in residential building.

Figure 9 .
Figure 9. Heat transfer through construction elements after using rice straw-cement brick.

Figure 10 .
Figure 10.Distribution of electricity in the residential building after using rice straw-cement brick.

Figure 11 .
Figure 11.CO 2 emissions from residential building after using rice straw-cement brick.

Figure 12 .
Figure 12.Heat transfer through construction elements after using sugarcane bagasse brick.

Figure 13 .
Figure 13.Distribution of electricity in the residential building after using sugarcane bagasse brick.

Figure 14 .
Figure 14.CO 2 emissions from residential building after using sugarcane bagasse brick.

Figure 16 .
Figure 16.Comparison between different scenarios in electricity consumption.

•
Evaluate the functionality of biomaterials in different examples.•Evaluation of the climatic region of Aswan City as a case study area.•Evaluate the energy consumption of Aswan city residential buildings, which use conventional materials in construction projects.•Evaluate the performance if biomaterial (Brick) is used in residential buildings by recycling two different types of agricultural waste available in Upper Egypt.•Determine the amount of energy savings achieved by replacing conventional brick with bio-brick in residen- tial buildings.• Studying the different economical alternatives and calculating the life cycle assessment to see the impact of using bio-bricks in saving the cost of the electricity used.

Table 1 .
Description of different construction elements.

Table 2 .
Amount of embodied carbon emissions for different building materials.

Table 3 .
Comparison of different scenarios' thermal characteristics.

Table 4 .
Annual electricity load and cost for different scenarios.

Table 5 .
The future value of electricity consumption cost for different scenarios.

Table 6 .
Precent value of electricity consumption cost during all period and amount of saving in different scenarios.