Abstract
The earliest European carvings, made of mammoth ivory, depict animals, humans, and anthropomorphs. They are found at Early Aurignacian sites of the Swabian Jura in Germany. Despite the wide geographical spread of the Aurignacian across Europe, these carvings have no contemporaneous counterparts. Here, we document a small, intriguing object, that sheds light on this uniqueness. Found at the Grotte des Gorges (Jura, France), in a layer sandwiched between Aurignacian contexts and dated to c. 36.2 ka, the object bears traces of anthropogenic modifications indicating intentional carving. Microtomographic, microscopic, three-dimensional roughness and residues analyses reveal the carving is a fragment of a large ammonite, which was modified to represent a caniformia head decorated with notches and probably transported for long time in a container stained with ochre. While achieving Swabian Jura-like miniaturization, the Grotte des Gorges specimen displays original features, indicating the craftsman emulated ivory carvings while introducing significant technical, thematic, and stylistic innovations. This finding suggests a low degree of cultural connectivity between Early Aurignacian hunter-gatherer groups in the production of their symbolic material culture. The pattern conforms to the existence of cultural boundaries limiting the transmission of symbolic practices while leaving space for the emergence of original regional expressions.
Similar content being viewed by others
Introduction
The discoveries made in the last two decades have made clear that artistic expressions reflecting symbolic behaviours have not emerged in Europe 40,000 years ago as a result of a cognitive revolution1,2, but appeared over a long time span in different regions of the world and expressed themselves in various and gradually more complex forms3. Early, isolated instances of abstract engravings are found at sites dating between 500 and 350 ka4,5,6 and they are more numerous and regionally circumscribed after 150 ka7,8,9,10,11,12,13,14,15,16,17,18,19. The creation of monumental structures in deep caves, possibly used for symbolic purposes, dates to 170 ka20. The use of the human body to convey symbolic meaning with personal ornaments is attested after 140 ka in North and South Africa21, as well as in the Levant22,23. Although mineral pigments are considered an ambiguous proxy for symbolic practices owing to their ethnographically attested use for functional purposes24, many authors consider that after their initial occurrence from 500 ka in Africa and 400 ka in Europe, their systematic use at Southern African sites after 160 ka supports their implications in symbolically mediated activities24,25, as demonstrated by the coating of personal ornaments with red ochre21,26, and its smearing on engravings16. The earliest possible symbolic markings on cave wall are found in Europe and date back to 63 ka27, while the oldest known figurative representations date back to 45 ka, as documented by several sites from the South-eastern Asia Pacific Islands28,29,30. In Europe, figurative paintings and engravings on blocks and cave walls are known since 39 ka, e.g.,31,32,33. The earliest three-dimensional carvings come from Swabian Jura sites, in Germany, and are attributed to the Early Aurignacian culture and dated between 40- and 38 ka34,35.
The earliest European carvings take the form of small figurines made of mammoth ivory representing animals, humans, and anthropomorphs. Their technological and stylistic homogeneity and sophistication support a well-established, regional, artistic tradition35 that doesn’t appear to have any contemporaneous counterparts, despite the Early Aurignacian being present across Europe, from Spain to Poland. The four known contemporary carvings from Europe strikingly differ thematically, stylistically, and technologically from the Swabian specimens. The so-called Trou Magritte “Venus” (Belgium)36 and the abri Blanchard “phallus” (France)37 are conical objects with a groove delimiting a rounded tip, with no equivalent in Germany. The Kostenki 14 “head” (Russia), also made of ivory, is a spherical object with a circular groove possibly representing a human neck38. The Galgenberg “Venus” (Austria) is made of green serpentine and depicts a human outline in two rather than three dimensions39. In contrast with the Aurignacian record, the following Gravettian technocomplex (32–26 ka), also present all over Europe, features three-dimensional carvings, representing mostly women, in a variety of styles, raw materials, and sizes40. This pattern raises the question of why a specific innovative artistic practice, such the production of three-dimensional carvings, may quickly become a well-established tradition in one region while not being adopted by neighbouring groups that are otherwise sharing the same cultural adaptation. Are we facing differential degrees of connectivity in distinct cultural domains among Early Upper Palaeolithic hunters-gatherers with strong similarities in hunting and domestic technologies, and less so in symbolic practices?
Here, we document a small, intriguing object that sheds light on this issue. It was found at the Grotte des Gorges (Jura, France) in a layer dated to c. 36.2 ka, sandwiched between layers that yielded Aurignacian artefacts. The object bears traces of anthropogenic modifications suggesting intentional carving (Fig. 1). Microtomographic, microscopic and three-dimensional analyses reveal that this carving comes from a fragment of a large ammonite, which was modified to represent a caniformia head decorated with notches. While achieving a miniaturization comparable to that characteristic of the Swabian Jura carvings, the Grotte des Gorges specimen presents original features that suggest the craftsman emulated the ivory carvings whilst introducing substantial technical, thematic, and stylistic innovations. This behaviour supports a low degree of cultural connectivity between Early Aurignacian hunter-gatherer groups in the production of their symbolic material culture.
Archaeological context
The Grotte des Gorges is a karstic cave developed on Jurassic formations located about 1 km southwest of Amange (Jura, France), along the southern slope of the Gorges valley. The valley is incised by the homonymous stream that originates in the Hercynian Serre massif (Fig. 2; SOM Text S1). The site was excavated from 2008 to 2017 under the direction of one of us (SD) over a surface of c. 35 m2 reaching a depth of 4 m. Sediments were water-sieved with a 2 mm mesh and all finds longer than 2 cm were piece plotted.
The most complete stratigraphic profile is observed in squares G10-12 and F12-13 excavated during the 2008–2009 seasons (SOM Figs. S1, S2; SOM Text S2). The five stratigraphic units (US) observed in that profile were grouped in a lower and upper sequence. The lower sequence includes US 4, 3, 2, and 1. US 4, 3, and 2 are interpreted as the result of mass movements of sediments accumulated outside the cavity and redistributed inside by debris flows and runoff processes. US 1, a rockfall unit, is only present at the entrance of the cavity. The upper sequence, consisting of US 0, is found only inside the cavity, and is composed of karstic clays originating from the surfaces of the slopes of the Serre massif. This deposit has almost filled the cavity (SOM Text S2).
US 4 yielded few faunal remains and eighteen lithic artifacts. Identified species comprise reindeer, bison, Lepus sp., woolly mammoth, red deer, and cave hyena (SOM Texts S3, S4; SOM Table S1). Lithics were scattered throughout the unit and consist of flakes, few retouched pieces, including a blade with typical Aurignacian retouch, a fragment of Dufour bladelet and a bladelet with direct marginal retouch (SOM Fig. S3; SOM Text S3). US 3 yielded a few worn bone fragments, a well-preserved horse rib, and the carving described in this study (SOM Text S3). US 2 encompasses three archaeological levels, from bottom to top, 2, 1b, and 1a. Levels 2 and 1b yielded remains of bison, reindeer, horse, steppe pila, root vole, and narrow-headed vole. A bone retoucher on a fragment of bison long bone diaphysis was found in level 1b (SOM Texts S3–S5) alongside few lithic micro-flakes (SOM Text S3). The presence of gnawed and regurgitated bone suggests that cave hyena played a role in the accumulation of the faunal assemblage from levels 2 and 1b (SOM Fig. S4; SOM Table S3). Anthropogenic traces in the form of cut marks and percussion notches indicate humans played a role in the accumulation of the assemblage as well (SOM Fig. S4; SOM Table S3). Level 1a records small, short-lived occupations. The fauna includes reindeer, bison, cave bear, a large undetermined ungulate, mammoth or rhinoceros, alpine ptarmigan, narrow-headed vole and three species of lemmings, reflecting a more rigorous environment than the previous levels (SOM Texts S4, S5). Systematic sieving allowed for the recovery of one hundred and twenty-eight lithics. Manufacturing by-products represent two-thirds of the assemblage. The remaining third comprises debitage products: flakes, blades, and bladelets. Nine bladelets or bladelet fragments were found. The three complete bladelets are straight and less than 2 cm in length. The assemblage also includes six blade fragments, including one with typical Aurignacian retouch, a bladelet core, and a massive flake retouched at its distal end that is interpreted as an Aurignacian nose scraper (SOM Fig. S5). An elongated, flat fragment of ivory bearing polish at one end was also found (SOM Fig. S5). US1 and US0 are archaeologically sterile (SOM Text S3). In US 4 and US 2, although good raw materials are locally available, a substantial proportion of lithics come from distant sources reaching up to 200 km. Flint transport indicates an origin from sources located 60 km to the south (Cesancey deposits), 207 km to the west (Yonne valley), and 165 km to the north-east (Liel-Schliengen, Germany) (SOM Text S6).
Engravings of Palaeolithic style depicting, among others, megaloceros, horse, proboscidean, and felines, were identified on the cave ceiling and on limestone blocs. Most engraved blocs were found on the surface. Three were uncovered at the interface between US 2 and US 0 (SOM Text S7).
A total of 20 bone remains from the Grotte des Gorges were radiocarbon dated (SOM Table S6). The sample from US 3 and another from US 2 level 2 were dated five and four times respectively. All ages are older than 32 ka aside from two. The first comes from a fragment of a human femur found outside the cave in square N6 within the upper portion of US 2. It yielded an age of 5,620 ± 30 BP (Beta-319487), which corresponds to the Neolithic period. The second was produced on a fragment of a bison humerus found inside the cave in square G13, US 2 level 1b. It yielded an age of 19,150 ± 170 BP (SacA-25148), which corresponds to the LGM.
The Bayesian model produced in Chronomodel 1.5.041 identified the previous two ages as outliers and suggests calibrated age range (95% C.I., using IntCal2042) between 40,996 and 38,989 cal. BP for US 4, between 36,586 and 35,752 cal. BP for US 3, between 35,814 and 34,760 cal. BP for US 2 level 2, between 35,383 and 34,209 cal. BP for US 2 level 1b, and between 34,439 and 33,203 cal. BP for US 2 level 1a (SOM Figs. S10–S11).
The rare stratigraphic inversions observed in US 2 are likely the result of sedimentary dynamics and post-depositional disturbance by carnivores. Nonetheless, all ages fall within the age range known for the Aurignacian technocomplex in Western Europe43.
The object described in the present study was found in US 3 (SOM Text S8), which is dated between 36,586 and 35,752 cal. BP. Considering that the rib which has produced this age range was located 15 cm above the object, and that the minimum age of US 4 is 38,989 BP, the minimum age of the object should be comprised between 36.5 and 39.0 ka BP.
Results
Raw material and taxonomic identification
The µCT acquisitions reveal that, contrary to what one may have expected from its colour and appearance, the object is not made of osseous material (Fig. 1). The 3D reconstruction shows it is filled with thin, homogenous sediment containing randomly oriented tubular features (SOM Data S1). These features are identified as spicules of fossil sponges, some of which taking the form of 4-pointed stars44,45. This observation and consideration of its outer morphology indicate the object is a fragment of an ammonite inner mold consisting of a partially preserved septum of the phragmocone. The bilateral symmetry of the object follows the symmetry of the septum along the siphuncular tube (SOM Figs. S6 and S7).
When observed in transversal section, the fragment suggests an ammonite with a rather wide, sub-circular ventral area. Among the taxa present in the local Callovian formations46,47 (geological maps Pesme and Dole), some Pachyceratidae, e.g., Erymnoceras, bear similar characteristics.
Description, technology, and wear
In its present state of preservation, the object has an irregular plano-convex morphology with one side featuring a deep, round concavity and the opposite side presenting a protuberance (Fig. 1). The convex surface has a lustrous appearance. Microscopic analysis reveals the surface is covered with funnel-like openings due to the porous nature of the ammonite mould and present, on the protuberance, two, non-joining, perpendicular, linear depressions with fringed outlines interpreted as eroded imprints of the fossil (Fig. 3). Similar depressions are present on and below the protuberance.
The ammonite fragment bears evidence of anthropogenic modifications by grooving, gouging, and grinding (Figs. 1, 4, 5). Grooving resulting from the to-and-fro movement of an elongated edge was applied around the concave area to produce 10 deep, sometime joining U-shaped notches arranged radially (Fig. 4). The same technique was used to incise four smaller notches on the left side of the object. Two small perpendicular notches were added midway between the protuberance and the left edge. The top one is positioned symmetrically to an oblique natural opening located between the protuberance and the right edge. On either side and below the protuberance, grooving was applied to make it more salient. All notches lack features produced when using a retouched or unretouched flint cutting edge in a to-and-fro motion, i.e., V- or irregular shaped sections with parallel micro-steps. The U-shaped section and superficial, sub-parallel micro-striations inside the notches (Fig. 4) rather suggest the use of a softer, quickly worn cutting edge, such as a limestone flake. The notches around the concavity are asymmetrical in section with those on the left being skewed toward the left and those on the right skewed toward the right (SOM Fig. S8). This is an indication that the object was turned 180˚ between the production of each set. A localized gouging was applied on the tip of the protuberance to create a concavity (Figs. 1, 5). The surrounding area was flattened by grinding. Grinding was also applied to flatten protruding ridges between the notches located on the left of the protuberance (Figs. 1, 5). Overall, the object bears 21 anthropogenic modifications: 17 notches of different types, three localized ground surfaces and one gouged pit.
Surface texture analysis identifies substantial differences between the surface of notches, the highly polished area on the convex face, the area below the protuberance, and the concave area on the opposite edge (Fig. 6; SOM Fig. S9; SOM Tables S4, S5). The natural surface roughness on the flat side of the object is highly variable and encompasses both the variation recorded on the broad concavity surrounded by deep notches and the lustrous area on the protuberance. Overall, the analysis demonstrates that the surface of the notches stands out in terms roughness while the highly polished area on the protuberance could represent an extreme in variation of the wear recorded for the remainder of the surface including the area below the protuberance interpreted as worked based on microscopic analysis.
SEM analysis in BS mode of red residues detected at the bottom of the deep notches surrounding the concavity shows they consist of sub-circular particles ranging between 2 and 5 µm in size. EDS reveals they are richer in Fe2O3 than the surrounding surfaces composed of SiO2, CaO, Al2O3, and P2O5. A single thin polygonal crystal features a morphology compatible with hematite (Fig. 7). The presence of hematite particles is confirmed by Raman spectroscopy (Fig. 8). The US 3 and the sediment surrounding the object showed no detectable evidence of iron oxide. The presence of hematite particles inside the notches probably results from an ochre-rich compound originally highlighting the notches.
Discussion
The modified ammonite fragment from Grotte des Gorges constitutes the first miniature carving interpreted as the representation of an animal head found in an Aurignacian site outside of the Swabian Jura. Its attribution to the Aurignacian is supported by the diagnostic lithics found below (US 4) and above (US 2) the stratigraphic unit (US 3) in which it was discovered. It is confirmed by the numerous broadly consistent radiocarbon ages dating the archaeological sequence (SOM Figs. S10, S11; SOM Table S6) and attributing an age of ~ 36,2 ka to the object. This attribution is also consistent with the faunal assemblages recovered throughout the stratigraphy (SOM Texts S4, S5) and the presence, in the layer caping the sequence, of slabs bearing engravings depicting Pleistocene fauna (SOM Text S7).
A symbolic use of the object is supported by its small size, unusual raw material, and the absence of traces indicative of a use as tool. The use of fossil ammonite for symbolic purposes is attested in the Aurignacian (SOM Text S9). The deep notches surrounding the natural concavity, arranged radially and symmetrically along the main axis of the object, originally filled with ochre, demonstrate the will to deliberately modify a natural shape while keeping its overall morphology. The natural shape was also modified by enhancing the pointed outline of the protuberance, carving a concavity at its tip, and regularizing it by grinding. Intriguingly, a groove was added to create a symmetry with a similar, albeit natural, linear depression present on the opposite side of the protuberance. These last modifications evoke the possibility that their production was aimed to represent the muzzle, snout, and eyes of an animal, and the natural protrusions on either side of the opposite concavity possibly representing ears.
Although clearly recognized by the microscopic analysis, the minimalistic nature of these modifications makes the identification of the depicted species speculative. The proportion and extension of the modified protuberance and the location of the possible eyes seem to rule out felids and rather evoke a member of the caniformia suborder such as bear, fox, wolf, or wolverine. The fact that the snout was slightly flattened by grinding perhaps makes bear the most likely represented species. Representations, including carvings, of bear (SOM Text S9) are known in Aurignacian contexts. The clear differences in surface texture between the highly polished appearance of the snout, the carved notches, and the remainder of the surface are consistent with an object transported over an extended period, the shiny appearance of the snout being the possible result of localized manipulation. The identification of hematite-rich ochre in the notches may originate from the object being transported in an ochred container or from being covered with ochre. The former hypothesis is the most likely considering the dark colour of the raw material, which absorbs the red colour rather than contrasts with it.
The identification of an Aurignacian miniature carving, possibly depicting a caniformia head, in a region 300 km away from the closest Aurignacian sites that have yielded abundant ivory carvings raises the question of why a such specific innovative artistic practice, i.e., the production of three-dimensional carvings, may quickly become a well-established tradition in one region while not being widely adopted by neighbouring groups otherwise sharing the same cultural adaptation in hunting and domestic technologies. The absence of suitable raw material does not appear to be a viable explanation since ivory was found at the Grotte des Gorges (SOM Text S3; SOM Fig. S5) and numerous Aurignacian sites in France and Belgium48,49. Therefore, the reason most likely lies in the structuring and connectivity of Aurignacian communities and the way in which cultural innovations spread between them.
Interestingly, the provenience of flint transformed into lithic tools found at the Grotte des Gorges shows no connection with the Swabian Jura. The Aurignacian hunters-gatherers who visited the site collected flint from sources, or acquired it through exchanges, over 60 km to the south, 165 km to the north-east, and 207 km to the west. This observation is consistent with variation in personal ornament types found at Aurignacian sites. Those found at the sites closest to Grotte des Gorges, e.g., Trou de la Mère Clochette and Grotte du Renne, display some similarities with those recovered in the Swabian Jura but also with those found in Belgium, the Rhone Valley and southwestern France50. One reaches the same conclusion when contrasting the origin of ochre used during the Aurignacian in the Swabian Jura. Recent analysis indicates that although ochre acquisition from distant sources is attested, there is a clear preference for local sources51. These patterns conform to the existence of cultural boundaries shaping the transmission of symbolic practices while not preventing cultural contact in the domains of technology and adaptation.
We argue that the production of the Grotte des Gorges carving better fits a case of emulation rather than imitation, sensu52,53,54. Emulation refers to the process of learning by focusing on the goals or outcomes of a behavior rather than imitating the specific actions or techniques used to achieve those goals. It involves identifying the desired results to achieve and pursue similar goals through their own means. Imitation involves replicating the specific actions, behaviors, or techniques of others. It focuses on reproducing the behavior itself, often through observational learning, and can be considered a more faithful reproduction of the model's actions. In the case of the Grotte des Gorges, emulation is suggested by the choice of a raw material that, contrary to mammoth ivory, has largely determined the final morphology of the figurine, the minor role played by shaping, and the original way in which deep radial grooves were applied to modify the object. Although the final goal is shared between the Grotte des Gorges and the Swabian Jura figurines, the means to achieve them differed drastically.
Methodology
Taxonomic identification of the fossil used to make the carving was based on comparisons with reference collections curated at the Natural History Museum of Geneva, Geology and Paleontology Department, and criteria established in the literature55,56,57. The carving was photographed with a Sony ILCE-6500 equipped with 3.5/30 mm macro-lens and a motorized Leica Z6 APOA equipped with a DFC420 digital camera linked to LAS Montage and Leica Map DCM 3D computer software. Photographs of the carving were imported into Adobe Illustrator to make a tracing recording area bearing traces of manufacture and wear identified under microscope. The origin of these modifications was inferred based on criteria published in the literature on stone, bone, and ivory carvings35,58,59,60. The identification of these traces was cross validated by three of us (ED, FdE, LD).
Microtomography acquisitions were performed at the PLACAMAT laboratory (University of Bordeaux) using a Phoenix NANOTOM® GE with the following scanning parameters: 70 kV, isotropic pixel size of 18 µm (leading to a voxel size of 18 µm). Images were reconstructed with the TIVMI® v2.3 software based on the HMH (Half-Maximum Height) algorithm61 extended to 3D62. Segmentation features present in the infilling was performed manually. Although time consuming, it was facilitated by differences in density between the material constituting the carving and voids in the infilling. The acquired 3D data was used to create an interactive PDF allowing to view the external mesh, the internal features or both.
High-resolution surface topography of selected areas was obtained using a MarSurf CM mobile confocal microscope driven by MarSurf MSW 8.6 software. This equipment was used with the aim of producing 3D renderings and profiles of natural and anthropogenic traces and characterize the roughness of worn and unworn areas. Post-acquisition treatment was carried out using the Mountain View 8 software and followed a procedure adapted from Martisius et al.63, d’Errico et al.64 and Ma et al.65. Using built-in operators, it entails levelling the surface (least square method), removing outliers (both isolated and close to the edge), and filling-in non-measured points (interpolating values from neighbors). Profiles of anthropogenic traces were extracted at this stage. In the case of worn and unworn surfaces, the form of the 3D acquisition was also removed (polynomial of fifth order). The roughness parameters (ISO 25178) extracted from the acquisition include three height parameters, i.e., Sq, Ssk, Sku, one spatial parameter, i.e., Sal, one hybrid parameter, i.e., Sdr, one functional surface parameter, i.e., Smc, one functional volume parameter, i.e., Vvv, and one feature parameter, i.e., Spc (see SOM Table S4 for a detailed description of these parameters). Since tribology is concerned with interactive surfaces relative to motion, the ISO 25178 roughness parameters mainly provide information on the upper portion of the surface, i.e., on peaks, and no equivalent parameters to Smc, and Spc is available for the valleys. To circumvent this limitation, the worn and unworn surfaces were mirrored on their z-axis, and Smc and Spc were extracted a second time. To avoid confusion, the two parameters extracted on the mirrored acquisition were labeled Smc_m and Spc_m (SOM Fig. S9; SOM Tables S4, S5).
Areas with reddish residues were analyzed with a JEOL JSM-6460LV SEM. The observations and analyses were conducted under a low vacuum mode by using an accelerating voltage of 20 kV. Element analyses were carried out with an EDS INCA Oxford 300 spectrometer. During the analyses, the working distance was kept constant (8 mm). Acquisition time was set up to 60 s for each EDS spectrum with an average downtime of 40 per cent. Raman analysis of red particles was conducted with a SENTERRA Dispersive Raman Microscope. The analyses were done with a 785 nm laser and a laser power of 1 mW to avoid thermal photodecomposition on the analyzed area. Acquisition time was set to 20 s and multiple co-additions to improve the signal-to-noise ratio. The spectrometer worked in a spectral range from 65 to 2980 cm−1. The working areas were observed through an integrated color camera INFINITY1. Data were collected and processed with OPUS v. 7.2 (Bruker Optik GmbH, Ettlingen). The mineral phase identification was based on comparisons of the recorded spectra with those of the RRUFF database66.
Data availability
All data are available in the main text or the supplementary materials.
References
Klein, R. G. The human career (3rd ed.). (University of Chicago Press, 2009).
Mellars, P. A. The character of the Middle-Upper Paleolithic transition on south-west France. in The explanation of culture change: Models in prehistory (ed. Renfrew, C.) 255–276 (Duckworth, 1973).
McBrearty, S. & Brooks, A. S. The revolution that wasn’t: A new interpretation of the origin of modern human behavior. J. Hum. Evol. 39, 453–563 (2000).
Joordens, J. C. A. et al. Homo erectus at Trinil on Java used shells for tool production and engraving. Nature 518, 228–231 (2015).
Mania, D. & Mania, U. Bilzingsleben - Homo erectus, his culture and his environment. The most important results of research. in Lower Palaeolithic small tools in Europe and the Levant (eds. Burdukiewicz, J. M. & Ronen, A.) 29–48 (British Archaeological Reports, 2003).
Sirakov, N. et al. An ancient continuous human presence in the Balkans and the beginnings of human settlement in western Eurasia: A Lower Pleistocene example of the Lower Palaeolithic levels in Kozarnika cave (North-western Bulgaria). Quat. Int. 223–224, 94–106 (2010).
d’Errico, F. et al. Trajectories of cultural innovation from the Middle to Later Stone Age in Eastern Africa: Personal ornaments, bone artifacts, and ocher from Panga ya Saidi, Kenya. J. Hum. Evol. 141, 102737 (2020).
d’Errico, F., García Moreno, R. & Rifkin, R. F. Technological, elemental and colorimetric analysis of an engraved ochre fragment from the Middle Stone Age levels of Klasies River Cave 1, South Africa. J. Archaeol. Sci. 39, 942–952 (2012).
Frayer, D. W., Orschiedt, J., Cook, J., Russell, M. D. & Radovčić, J. Krapina 3: Cut marks and ritual behavior?. Period. Biol. 108, 519–524 (2006).
Gao, X., Huang, W., Xu, Z., Ma, Z. & Olsen, J. W. 120–150 ka human tooth and ivory engravings from Xinglongdong Cave, Three Gorges Region, South China. Chin. Sci. Bull. 49, 175–180 (2004).
Henshilwood, C. S., d’Errico, F. & Watts, I. Engraved ochres from the Middle Stone Age levels at Blombos Cave, South Africa. J. Hum. Evol. 57, 27–47 (2009).
Henshilwood, C. S. et al. Emergence of modern human behavior: Middle Stone Age engravings from South Africa. Science 295, 1278–1280 (2002).
Hovers, E., Vandermeersch, B. & Bar-Yosef, O. A Middle Paleolithic engraved artefact from Qafzeh Cave Israel. Rock Art Res. 14, 79–87 (1997).
Jaubert, J. et al. The Middle Palaeolithic occupation of Mar-Tarik, a new Zagros Mousterian site in Bisotun massif (Kermanshah, Iran). In Le paléolithique d’Iran UISPP, Proceedings of the XV World Congress (Lisbon, 4–9 September 2006) (eds. Otte, M., Biglari, F. & Jaubert, J.) 7–27 (Archaeopress, 2009).
Leder, D. et al. A 51,000-year-old engraved bone reveals Neanderthals’ capacity for symbolic behaviour. Nat. Ecol. Evol. 5, 1273–1282 (2021).
Li, Z. et al. Engraved bones from the archaic hominin site of Lingjing, Henan Province. Antiquity 93, 886–900 (2019).
Prévost, M., Groman-Yaroslavski, I., Crater Gershtein, K. M., Tejero, J.-M. & Zaidner, Y. Early evidence for symbolic behavior in the Levantine Middle Paleolithic: A 120 ka old engraved aurochs bone shaft from the open-air site of Nesher Ramla, Israel. Quat. Int. 624, 80–93 (2022).
Vincent, A. L’os comme artefact au Paléolithique moyen : Principes d’étude et premiers résultats. in L’homme de Néandertal 4 (ed. Otte, M), 185–196 (ERAUL, 1988).
Watts, I. The pigments from Pinnacle Point Cave 13B, Western Cape, South Africa. J. Hum. Evol. 59, 392–411 (2010).
Jaubert, J. et al. Early Neanderthal constructions deep in Bruniquel Cave in southwestern France. Nature 534, 111–114 (2016).
Sehasseh, E. M. et al. Early Middle Stone Age personal ornaments from Bizmoune Cave, Essaouira, Morocco. Sci. Adv. 7, eabi8620 (2021).
Bar-Yosef Mayer, D. E. Shell beads of the Middle and Upper Palaeolithic: A review of the earliest record. In Beauty and the eye of the beholder: Personal adornments across the millennia (eds. Mărgărit, M. & Boroneanț, A.) 11–25 (Cetatea de scaun, 2020).
Steele, T. E., Álvarez-Fernández, E. & Hallett-Desguez, E. A review of shells as personal ornamentation during the African Middle Stone Age. PaleoAnthropology 2019, 24–51 (2019).
Dapschauskas, R., Göden, M. B., Sommer, C. & Kandel, A. W. The emergence of habitual ochre use in Africa and its significance for the development of ritual behavior during the Middle Stone Age. J. World Prehistory 35, 233–319 (2022).
Rosso, D. E. The first uses of colour: What do we know?. J. Anthropol. Sci. Riv. Antropol. JASS 100, 45–69 (2022).
d’Errico, F. et al. Additional evidence on the use of personal ornaments in the Middle Paleolithic of North Africa. Proc. Natl. Acad. Sci. 106, 16051–16056 (2009).
Hoffmann, D. L. et al. U-Th dating of carbonate crusts reveals Neandertal origin of Iberian cave art. Science 359, 912–915 (2018).
Aubert, M. et al. Earliest hunting scene in prehistoric art. Nature 576, 442–445 (2019).
Aubert, M. et al. Palaeolithic cave art in Borneo. Nature 564, 254–257 (2018).
Aubert, M. et al. Pleistocene cave art from Sulawesi, Indonesia. Nature 514, 223–227 (2014).
Quiles, A. et al. A high-precision chronological model for the decorated Upper Paleolithic cave of Chauvet-Pont d’Arc, Ardèche, France. Proc. Natl. Acad. Sci. 113, 4670–4675 (2016).
Rodríguez-Vidal, J. et al. A rock engraving made by Neanderthals in Gibraltar. Proc. Natl. Acad. Sci. 111, 13301–13306 (2014).
Bourrillon, R. et al. A new Aurignacian engraving from Abri Blanchard, France: Implications for understanding Aurignacian graphic expression in Western and Central Europe. Quat. Int. 491, 46–64 (2018).
Conard, N. J. Palaeolithic ivory sculptures from southwestern Germany and the origins of figurative art. Nature 426, 830–832 (2003).
Dutkiewicz, E. Zeichen. Markierungen, Muster und Symbole im Schwäbischen Aurignacien. (Kerns Verlag, 2021).
Dewez, M. L’art mobilier paléolithique du Trou Magrite dans son contexte stratigraphique. Bull. Société R. Belge Anthropol. Préhistoire Brux. 96, 117–133 (1985).
Delluc, B. & Delluc, G. Le phallus sculpté de l’abri Blanchard (Sergeac, Dordogne). Antiquités nationales (Saint-Germain-en-Laye) 11, 23–28 (1979).
Sinitsyn, A. A. The most ancient sites of Kostenki in the context of the Initial Upper Paleolithic of northern Eurasia. in The Chronology of the Aurignacian and of the Transitional Technocomplexes: Dating, Stratigraphies, Cultural Implications. Proceedings of Symposium 6.1 of the XIVth Congress of the UISPP (University of Liège, Belgium, September 2–8, 2001) (eds. Zilhao, J. & d’Errico, F.) 89–107 (2003).
Delporte, H. L. Vénus dansante de Galgenberg. Recherche 222, 772–773 (1990).
Tripp, A. A cladistics analysis exploring regional patterning of the anthropomorphic figurines from the Gravettian. in Cultural phylogenetics: Concepts and applications in archaeology (ed. Mendoza Straffon, L.) 179–202 (Springer International Publishing, 2016).
Lanos, P. & Dufresne, P. ChronoModel version 1.5.0: Software for chronological modelling of archaeological data using Bayesian statistics (2019).
Reimer, P. J. et al. The IntCal20 Northern Hemisphere radiocarbon age calibration curve (0–55 cal kBP). Radiocarbon 62, 725–757 (2020).
Banks, W. E., d’Errico, F. & Zilhão, J. Revisiting the chronology of the Proto-Aurignacian and the Early Aurignacian in Europe: A reply to Higham et al.’s comments on. J. Hum. Evol. 65, 810–817 (2013).
Łukowiak, M. Utilizing sponge spicules in taxonomic, ecological and environmental reconstructions: A review. PeerJ 8, e10601 (2020).
Antcliffe, J. B., Callow, R. H. T. & Brasier, M. D. Giving the early fossil record of sponges a squeeze. Biol. Rev. 89, 972–1004 (2014).
Campy, M., Chauve, P. & Pernin, C. Pesmes, Carte géologique de la France (1/50 000) no. 501 et Notice explicative. (1983).
Chauve, P., Kerrien, Y., Pernin, C., Cornet, J. & Féraud, J. Dôle, Carte géologique de la France (1/50 000) no. 528 et Notice explicative. (1979).
Otte, M. Le Paléolithique supérieur ancien en Belgique. (Musées royaux d’Art et d’Histoire, 1979).
Heckel, C. E. Production organization in the early Upper Paleolithic: Ivory tools and ornaments of the French Aurignacian. (PhD Thesis, New York University, 2015).
Vanhaeren, M. & d’Errico, F. Aurignacian ethno-linguistic geography of Europe revealed by personal ornaments. J. Archaeol. Sci. 33, 1105–1128 (2006).
Velliky, E. C., MacDonald, B. L., Porr, M. & Conard, N. J. First large-scale provenance study of pigments reveals new complex behavioural patterns during the Upper Palaeolithic of south-western Germany. Archaeometry 63, 173–193 (2021).
Whiten, A., McGuigan, N., Marshall-Pescini, S. & Hopper, L. M. Emulation, imitation, over-imitation and the scope of culture for child and chimpanzee. Philos. Trans. R. Soc. B Biol. Sci. 364, 2417–2428 (2009).
Tomasello, M., Kruger, A. C. & Ratner, H. H. Cultural learning. Behav. Brain Sci. 16, 495–511 (1993).
Tennie, C., Call, J. & Tomasello, M. Ratcheting up the ratchet: On the evolution of cumulative culture. Philos. Trans. R. Soc. B Biol. Sci. 364, 2405–2415 (2009).
Arkell, W. J., Kummel, B. & Wright, C. W. Mesozoic Ammonoidea. In Treatise on Invertebrate Paleontology. Mollusca 4: Cephalopoda, Ammonoidae (ed. Moore, R. C.) 80–465 (Geological Society of America & The University of Kansas Press, 1957).
Lehmann, U. Ammoniten ihr Leven und ihre Umwelt (Ferdinand Enke, 1976).
Klug, C., Korn, D., De Baets, K., Kruta, I. & Mapes, R. H. Ammonoid paleobiology, Volume I: From anatomy to ecology. (Springer, 2015).
d’Errico, F. & Nowell, A. A new look at the Berekhat Ram figurine: Implications for the origins of symbolism. Camb. Archaeol. J. 10, 123–167 (2000).
d’Errico, F. La vie sociale de l’art mobilier paléolithique. Manipulation, transport, suspension des objets en os, bois de cervidés, ivoire. Oxf. J. Archaeol. 12, 145–174 (1993).
Dauvois, M. Travail expérimental de l’ivoire: Sculpture d’une statuette féminine. In Méthodologie appliquée à l’industrie de l’os préhistorique. 2ème Colloque international sur l’industrie de l’os dans la préhistoire, Abbaye de Sénanque (Vaucluse) (ed. Camps-Fabrer, H.), 269–273 (Éditions du CNRS, 1977).
Spoor, C. F., Zonneveld, F. W. & Macho, G. A. Linear measurements of cortical bone and dental enamel by computed tomography: Applications and problems. Am. J. Phys. Anthropol. 91, 469–484 (1993).
Dutailly, B., Coqueugniot, H., Desbarats, P., Gueorguieva, S. & Synave, R. 3D surface reconstruction using HMH algorithm. In 2009 16th IEEE International Conference on Image Processing (ICIP) 2505–2508 (2009).
Martisius, N. L. et al. Time wears on: Assessing how bone wears using 3D surface texture analysis. PLoS ONE 13, e0206078 (2018).
d’Errico, F. et al. Technological and functional analysis of 80–60 ka bone wedges from Sibudu (KwaZulu-Natal, South Africa). Sci. Rep. 12, 16270 (2022).
Ma, S., Doyon, L., Zhang, Y. & Li, Z. Disentangling carcass processing activities and the state of worked hide from use wear patterns on expedient bone tools: A premilinary experiment. J. Archaeol. Sci. Rep. 49, 104027 (2023).
Lafuente, B., Downs, R. T., Yang, H. & Stone, N. 1. The power of databases: The RRUFF project. In Highlights in mineralogical crystallography (eds. Armbruster, T. & Danisi, R. M.) 1–30 (Walter De Gruyter GmbH, 2016). https://doi.org/10.1515/9783110417104-003.
Acknowledgements
We wish to thank Aurélien Royer for his constructive feedback on an earlier version of the manuscript. This research was funded by the following agencies: Initiative d’Excellence IdEx, University of Bordeaux, Talent program grant # 191022-001 (Fd’E, LD); French government in the framework of the University of Bordeaux’s IdEx “Investments for the Future” program / GPR “Human Past” (Fd’E, HQ, AQ, LD); Research Council of Norway, Centres of Excellence (SFF), Centre for Early Sapiens Behaviour, SapienCE grant # 262618 (Fd’E); ERC Synergy QUANTA (grant #951388); Labex LaScArBx-ANR # ANR-10-LABX-52 (Fd’E, HQ, AQ, MB, LD).
Author information
Authors and Affiliations
Contributions
Excavation: S.D.; conceptualization: F.d’E., S.D., H.C., L.D.; methodology: F.d’E., H.C., C.M., E.D., L.D.; investigation: F.d’E., S.D., H.C., C.M., E.D., R.P., L.S., D.C., M.B., C.G., J.A., A.Q., L.D.; visualization: F.d’E., S.D., H.C., C.M., E.D., L.S., D.C., C.G., A.Q., L.D.; supervision: F.d’E., S.D., L.D.; writing—original draft: F.d’E., L.D.; writing—supplementary online material: F.d’E., S.D., H.C., C.M., E.D., L.S., C.G., A.Q., L.D.; writing—review and editing: F.d’E., S.D., H.C., C.M., E.D., R.P., L.S., D.C., M.B., C.G., J.A., A.Q., L.D.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
d’Errico, F., David, S., Coqueugniot, H. et al. A 36,200-year-old carving from Grotte des Gorges, Amange, Jura, France. Sci Rep 13, 12895 (2023). https://doi.org/10.1038/s41598-023-39897-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-023-39897-7