Introduction

Eukaryotic DNA replication initiation is organized in space and time, reflecting a reproducible DNA replication-timing program1. In general, late replication appears to be associated with a more repressive chromatin state: late-replicating regions tend to localize to the nuclear periphery2,3 and to broadly associate with the condensed “B” compartment in chromatin conformation capture assays4,5. Likewise, genes in late-replicating regions often have lower expression6,7, with corresponding histone methylation8,9 and deacetylation8,10, than genes in early-replicating regions. Constitutive heterochromatin, which is gene-poor and highly-condensed, is often described to be late replicating11,12,13, although direct visualization by microscopy has classified five sequential nuclear localization patterns of nascently-replicated DNA, with euchromatic replication primarily occurring during the first wave2. While O’Keefe et al.2 used in situ hybridization probes to demonstrate that centromeric α-satellite DNA co-localized with nascent DNA in the third wave of replication, which heterochromatin replicates in the other waves remains uncharacterized. These results suggest that heterochromatin replication timing is more complicated than currently appreciated, and potentially points to the existence of distinct heterochromatin subtypes that differ in their replication timing.

Existing methods for measuring replication timing at genome scale14 are sequencing-based, making them reliant on the quality of reference genome assemblies. Notably, the current human reference genome (GRCh38/hg38) contains 151 Mb of unresolved gaps, represented as multi-megabase arrays of unknown sequence15. Thus, these regions—which include large pericentromeric regions on chromosomes 1, 9, and 16 and the entire p-arms of the five acrocentric chromosomes (chr13, chr14, chr15, chr21, chr22)—have been refractory to whole-genome analyses, including those of replication timing. In addition, hg38 contains statistically modeled sequences for the centromeric α-satellite DNA, which were designed as decoys for sequence alignment rather than to reflect the true linear sequence of these arrays16.

Centromeres, in particular, have been suggested to complicate the general association of heterochromatin with late replication timing: centromeres replicate in early S phase across multiple yeast species17,18,19,20 and in mid S phase in maize21. In humans, centromeric replication timing has primarily been reported as late replicating22,23,24, although it has also been reported to occur in mid S phase2. We previously reported25 that the centromeric sequence models in hg38 enabled preliminary analysis of replication timing for the majority of human centromeres by whole-genome sequencing. We found consistent evidence of replication-timing peaks within centromeric regions, suggesting that centromeres contain replication origins. We further demonstrated that centromeric replication occurs during mid-to-late S-phase and that its timing is highly divergent among cell lines. However, because the decoy sequences in hg38 were not linear assemblies of the centromeres, we were unable to analyze the precise locations of these peaks.

Here, we report nearly-gapless telomere-to-telomere replication timing profiles across all autosomes and the X chromosome. Using the telomere-to-telomere human genome assembly T2T-CHM13, recently published by the Telomere-to-Telomere Consortium15, we provide the first report of replication timing of constitutive heterochromatin in the context of the whole genome. The linear sequences for the centromeres in this genome assembly further enabled us to revisit and reaffirm our previously conclusions based on hg38, while also analyzing the locations of centromeric replication initiation sites.

Results and discussion

Telomere-to-telomere replication timing profiles

In our prior analysis25, we generated replication timing profiles for five cell lines—the apparently healthy lymphoblastoid cell line GM12878, the embryonic kidney cell line HEK293T, the ovarian carcinoma cell line A2780, and the breast cancer cell lines HCC1143 and HCC1954—by whole-genome sequencing of G1- and S-phase populations isolated by fluorescence-activated cell sorting (FACS). The G1-phase fraction was used to define variable-size uniform-coverage genomic windows, accounting for sequencing biases and copy-number variants, and then sequencing read depth was assessed for the S-phase fraction. After S/G1 normalization, fluctuations in S-phase read depth reflect only the effects of replication timing, such that early-replicating regions are more highly represented relative to late-replicating regions26.

T2T-CHM13 is a gapless human genome assembly for CHM13-hTERT, a telomerase reverse transcriptase-transformed cell line derived from a complete hydatidiform mole with a stable 46, XX karyotype15. Hydatidiform moles are formed during fertilization and contain only DNA from the sperm; thus CHM13-hTERT is homozygous, reducing the complexity of genome assembly. T2T-CHM13 was assembled from long-read PacBio circular consensus sequencing and polished with a combination of other short- and long-read sequencing methods. To assess whether this new assembly could be used to study the replication timing of heterochromatin, we generated replication timing profiles from the same sequencing libraries, re-aligning the sequencing reads for each cell line to T2T-CHM13. The resulting replication timing profiles were nearly gapless, with only the rDNA loci remaining as unresolved (Fig. 1). (We note that CHM13-hTERT has an XX karyotype, as do all five cell lines studied. Thus, we did not consider the Y chromosome.) We validated these replication-timing profiles by comparison to the hg38-based replication timing profiles, using the UCSC Genome Browser liftOver tool to convert between hg38 and T2T-CHM13 coordinates. The profile for each cell line was virtually identical (r > 0.999) between genome builds for regions that could be successfully “lifted over” (i.e., the non-shaded regions in Fig. 1; 94.14% of the genome). We note that this approach for inferring the replication timing of heterochromatic regions necessitated the analysis of a G1 control sample and was not amenable to FACS-free inference of replication timing from genome sequence data27 (Supplementary Fig. 1).

Figure 1
figure 1

Telomere-to-telomere replication timing profiles for all autosomes and chromosome X. 1-kb windows in T2T-CHM13 that cannot be lifted over to hg38 (5.86%) are indicated with blue shading. Replication timing values are scaled to an autosome-wide mean of zero (black line). All chromosomes are shown on the same scale. The replication-timing profile for GM12878 is shown.

Our telomere-to-telomere profiles revealed the replication timing of several large regions previously excluded from genomic analysis. This included the entire p-arms of the acrocentric chromosomes (except for the rDNA loci) and the large pericentromeric satellite arrays on chromosomes 1, 9, and 16. The replication timing profiles in each of these regions showed similar structure to the profiles for other genomic regions, with distinct local maxima and minima of varying amplitudes (Fig. 2a, b; Supplementary Fig. 2). Annotation of these new sequences28 indicated that these regions include several multi-megabase repeat arrays of distinct satellite sequences, including human satellite 1 (HSat1; 4.9 Mb on chr13p), human satellite 2 (HSat2; 13.2 Mb on chr1q, 12.7 Mb on chr16q), human satellite 3 (HSat3; 27.6 Mb on chr9, 8 Mb on chr15p), and β-satellite (1.9 Mb on chr22p). Within these larger satellite arrays, HSat1 appeared to replicate in mid-S phase, while HSat2 and HSat3 were later-replicating; we further characterize the replication timing of each satellite family, across all family members genome-wide, below.

Figure 2
figure 2

Replication timing (RT) of previously unresolved regions of the human genome. (a) RT profiles for the five acrocentric p-arms. rDNA arrays (gray) remain as gaps in the profile. Regions shown span from the telomere to 5 Mb upstream of the start of the p-most α-satellite higher-order repeat. (b) RT profiles for the large heterochromatin arrays neighboring the centromeres on the q-arms of chromosomes 1, 9, and 16. Regions shown span from the end of q-most α-satellite higher-order repeat to 5 Mb downstream of the last annotated satellite. The RT profile for the lymphoblastoid cell line GM12878 is shown for each region. rDNA loci and satellite arrays larger than 1 Mb are indicated in colored boxes.

Next, we visualized the centromeric regions. Using hg38, we previously reported that each centromeric region contains multiple replication timing peaks and that centromeric replication timing is not extremely late relative to the rest of the genome25. Although the linear centromeric sequences in T2T-CHM13 completely replace the decoy sequences in hg38, these results were reproduced here (Fig. 3; Supplementary Fig. 3; Fig. 4c). Additionally, we were able to meaningfully identify the locations of replication timing peaks within centromeric regions and to analyze their dynamics, as we present below (Fig. 5). Furthermore, satellite repeat elements within T2T-CHM13 centromeric regions are well-annotated28, enabling us to characterize the replication timing of the rapidly-evolving centromere-specific α-satellite DNA, which is present as canonical higher-order repeat arrays (HORs), divergent higher-order repeat arrays, and α-satellite monomers (presented in Fig. 4). Although many of the centromeric regions contain multiple HORs, only a subset is observed to bind kinetochore proteins and function in active centromere assembly29.

Figure 3
figure 3

Centromeric replication timing (RT) of all human autosomes and chromosome X. The locations of α-satellite higher-order repeats on each chromosome, which scaffold active centromere assembly, are indicated in blue. For each chromosome, the entire region shown is annotated as centromeric. The RT profile for the lymphoblastoid cell line GM12878 is shown for each region.

Figure 4
figure 4

Replication timing (RT) bias of different satellite sequence elements. (a) The centromeric region of chromosome 3 is shown. Neighboring sequence elements are denoted in alternating colors. The 200 kb region indicated with an asterisk contains 11 sequence elements. Regions of non-satellite DNA are labelled as “ct”. (b) Left: Replication timing values for regions newly resolved in the T2T-CHM13 assembly (green) were distributed across a similar range as for the whole genome (gray) and were only slightly skewed toward late replication. Right: Non-satellite sequence (annotated “ct” in a) is highly abundant in the newly-resolved regions and contains the 81.75% of early (RT > 0) values in these regions. (c) All satellite families are biased toward late replication timing. For each sequence element family, the distribution of RT values (green) is compared to all non-centromeric regions of the genome (gray). α-satellite higher-order repeats are earlier-replicating than the large heterochromatic arrays (HSat2 and HSat3). RT values are for the lymphoblastoid cell line GM12878. Diverged HOR (dhor) sequences are diverged from the canonical α-satellite. The genome-wide distribution (gray) is repeated across panels for comparison.

Figure 5
figure 5

Replication timing (RT) dynamics are not substantially different in centromeric regions than in the rest of the genome. (a, c) The distance between RT peaks was used as a metric of inter-origin distance. Inter-origin distances were slightly larger in centromeric regions (green, a) and α-satellite higher-origin repeats (blue, c), relative to the rest of the genome (gray). (b, d) RT profile slope was used as a proxy for replication fork speed. For each peak, the ascending and descending slopes are averaged. RT slopes were slightly shallower in centromeric regions (green, b) and α-satellite higher-origin repeats (blue, d), relative to the rest of the genome (gray). RT values are for the lymphoblastoid cell line GM12878.

Replication timing bias of repetitive sequence elements

Between the acrocentric p-arms and the centromeric regions, T2T-CHM13 adds 395 Mb of densely annotated repeat-rich sequence whose replication timing has not been analyzed. Many of the annotated satellite sequences are relatively short (median: 7.25 Kb) and neighbored by sequences of other satellite families (Fig. 4a). Thus, we were interested to know whether these satellite families differed from one another in their replication timing: persistent patterns in replication timing of a family across multiple chromosome contexts could reflect some underlying property that controls when it replicates.

Indeed, satellite families did differ in both the median and range of replication timing values observed. Replication timing values for non-satellite sequence in these regions (annotated as “ct”) ranged from very early to very late, with a median somewhat later than the genome average (RT = − 0.25 vs. − 0.03; Fig. 4b). In contrast, each of the satellite sequence families was biased toward late replication—although none were exclusively late replicating (Fig. 4c). Notably, α-satellite HORs replicated earlier on average than human satellite 2 (HSat2) and human satellite 3 (HSat3), but later than human satellite 1 (HSat1). This is consistent with the notion that the active centromere is earlier replicating than its surrounding context, potentially to facilitate kinetochore loading onto both sister chromatids at the appropriate time during S-phase. Furthermore, late replication of HSat2 and HSat3, evolutionarily related satellites that form large blocks of constitutive heterochromatin, suggests that they may comprise the later waves of replication observed by microscopy2.

Replication dynamics within centromeric regions

Identifying the locations of replication timing peaks within centromeric regions allowed us to next ask about replication dynamics within these regions. We used two metrics to assess replication dynamics: the distance between consecutive replication timing peaks as a proxy for inter-origin distance, and the slope between replication timing peaks and valleys as a proxy for replication fork speed. We observed that inter-peak distances were slightly longer in centromeric regions relative to the rest of the genome (median: 0.65 Mb in centromeric regions vs. 0.51 Mb genome-wide; Fig. 5a) and replication-timing slopes were similar (median: 0.89/Mb in centromeric regions vs. 0.88/Mb genome-wide; Fig. 5b). While looking specifically within α-satellite HORs, these trends were more pronounced (Fig. 5c, d). This could suggest that the active centromere poses a barrier to replication initiation and/or elongation, resulting in fewer origins firing and/or slower replication progression through these satellite arrays. However, there was substantial overlap between the distributions in all comparisons, indicating that many individual origins have similar dynamics in centromeric and non-centromeric regions. Thus, we favor the explanation that these differences are an artifact of the relatively sparser sequencing coverage of centromeric regions, resulting in an undercounting of centromeric peaks.

Centromeric replication timing varies consistently among cell lines

Finally, we considered differences between the five cell lines analyzed. Replication timing biases of individual satellite repeat families were consistent across cell lines (Fig. 6a). Likewise, inter-origin distances (Fig. 6b) and replication timing slopes (Fig. 6c) were comparable. We had previously observed that there were differences in average centromeric replication timing between these cell lines, such that the average centromeric region in A2780 and HEK293T was earlier-replicating and the average centromeric region in HCC1954 and HCC143 was later-replicating25. Even though the replication timing profiles in these regions could not be “lifted over” between hg38 and T2T-CHM13, this trend was again observed in the T2T-CHM13 profiles (Fig. 6d). Using T2T-CHM13, we were further able to analyze replication timing of individual centromeric regions in each cell line. We found that the trend observed on average reflected a persistent pattern across chromosomes within each cell line, rather than being driven by the replication timing of a subset of centromeres (Fig. 6e).

Figure 6
figure 6

Variability in centromeric regions among cell lines persists across sequence elements and chromosomes. (a) The replication-timing bias for each centromeric sequence element type is compared across five cell lines. For each satellite sequence family, the median interquartile range across cell lines is indicated below the axis. HEK293T and A2780, which have, on average, the earliest centromeric replication timing, are earlier replicating across many different sequence elements. Compare to Fig. 4. (b, c) Inter-origin distance and RT slope are similar across cell lines. Compare to Fig. 5. (d) Average replication-timing within centromeric regions and the flanking 5 Mb on either side. For each chromosome, the entire annotated centromeric region (Fig. 3) was divided into 100 equally spaced bins. Given that centromeres differ in length among chromosomes, coordinates within the tan box represent relative position within the region. HEK293T and A2780 have the earliest average centromeric replication, while GM12878 and HCC1143 have the latest. (e) Differences in centromere replication timing among cell lines are consistent across chromosomes. Each bar represents the number of times that a given cell line had the earliest, 2nd earliest, 3rd earliest, etc. median replication timing across the entire centromeric region (analogous to the shaded region in d, but considering each chromosome independently). HEK293T and A2780 are consistently the earliest replicating, while GM12878 and HCC1143 are consistently the latest replicating, and HCC1954 is consistently intermediate.

Taken together, our results indicate that the T2T-CHM13 genome assembly provides a reliable tool for inference of nearly gapless telomere-to-telomere human replication timing profiles. These newly profiled regions confirm that heterochromatin is typically (but not exclusively) late replicating and reveal differences in replication timing biases of satellite repeat families. Linear centromeric reference sequences enabled us to further confirm our prior findings that centromeres replicate in mid-to-late S phase, are not unusually late replicating relative to the rest of the genome, and that their timing of replication differs between cell lines. One biological mechanism that could potentially shape differences between cell lines is differential recruitment of the centromere-specific histone H3 variant CENP-A. Variation in HOR array length and sequence divergence has been shown to influence the competency of centromeric regions to recruit CENP-A30, and in vitro experiments suggest that depletion of CENP-A during S-phase results in replication fork stalling specifically at centromeres31. Thus, sequence and copy-number variation at centromeric regions among cell lines may alter the replication timing of individual chromosomes. However, by comparing centromeric regions within the same cell line, we demonstrate that earlier centromeric replication timing appears to be a global phenomenon impacting all chromosomes. An intriguing possibility is that centromeric replication is coordinated across chromosomes, perhaps by their nuclear localization: centromeres are strongly enriched for intrachromosomal interactions in budding yeast32 and centromere location within the nucleus has been implicated in the maintenance of pluripotency in human embryonic stem cell lines33. In that scenario, advancing the replication timing of one centromere could have the impact of altering global centromeric replication timing. To our knowledge, such a mechanism has yet to be described. Likewise, the consequences of divergent centromeric replication timing between cell lines remain unclear. Telomere-to-telomere replication timing profiles provide both the impetus and the tools for investigating these questions further.

Methods

Preparation of whole genome sequence data

All sequence data analyzed in this study were previously published in Massey et al.25. Tissue culture, fluorescence-activated cell sorting, library preparation, and sequencing are detailed in that publication.

Sequencing reads were re-aligned to the human genome assembly T2T-CHM13 v1.1 with the Burrows-Wheeler Aligner maximal exact matches (BWA-MEM) algorithm (bwa v0.7.13). Sequence annotations are from Altemose et al.28 and were downloaded from the UCSC Genome Browser (University of California, Santa Cruz; “cenSatAnnotation” track).

Replication timing profiles

Replication timing profiles were inferred by the S/G1 method described in Koren et al. (2012)26. Briefly, variable-size genomic bins were defined such that each bin had uniform coverage (200 reads) in the G1-phase library for a given cell line. Per-bin coverage was calculated for the corresponding S-phase library. The resulting profile was smoothed using a cubic smoothing spline (MATLAB function csaps, smoothing parameter 1 × 10–16), and normalized to an autosomal mean of 0 and standard deviation of 1.