Abstract
Fluids in subduction zones play a key role in controlling seismic activity, drastically affecting the rheology of rocks, triggering mineral reactions, and lowering the effective stress. Fluctuating pore pressure is one important parameter for the switch between brittle and ductile deformation, thus impacting seismogenesis. Episodic tremor and slow slip events (ETS) have been proposed as a common feature of the geophysical signature of subduction zones. Their geological record, however, remains scanty. Only the detailed and further characterization of exhumed fossil geological settings can help fill this knowledge gap. Here we propose that fluctuating pore pressure linked to metamorphic dehydration reactions steered cyclic and ETS-related brittle and ductile deformation of continental crustal rocks in the subduction channel of the Apennines. Dilational shear veins and ductile mylonitic shear zones formed broadly coevally at minimum 1 GPa and 350 °C, corresponding to ~ 30–40 km depth in the subduction zone. We identify carpholite in Ca-poor metasediments as an important carrier of H2O to depths > 40 km in cold subduction zones. Our results suggest that the described (micro)structures and mineralogical changes can be ascribed to deep ETS and provide a useful reference for the interpretation of similar tectonic settings worldwide.
Similar content being viewed by others
Introduction
Subduction zones effectively control the volatile cycle between shallow crust and mantle. Fluids are liberated in subduction zones at shallow depth primarily due to compaction and porosity decrease and at greater depth to dehydration via mineralogical reactions (e.g.1,2) of the subducting slab. Fluid release has major implications for volcanic activity, ore-deposit formation, metamorphic reactions and the rheological behaviour of deforming rocks and related seismicity.
Episodic tremor and slow slip events (ETS) are constituent elements of the geophysical record of subduction zones. Tremors are a persistent low-amplitude seismic signal associated with slow slip, that is, a slip larger than the average plate motion that is detected geodetically, lasting from days to years3,4,5. Their seismic signature has been related to deforming rock volumes characterised by high Vp/Vs ratios, where pore pressure may transiently reach and even exceed lithostatic values6,7. ETS are located in the immediate surroundings of megathrust earthquakes and likely play a role as stress meters and in the stress transfer to the megathrust fault8, although a spatial separation between ETS and megathrust earthquakes is also reported from some warm subduction zones9.
Despite the growing number of seismological studies, the evidence in the geological record of ETS remains little constrained and poorly understood and thus is the basis for a lively debated10,11. Behr and Bürgmann11 and Kirkpatrick et al.10 suggest a series of potential geological structures related to ETS, reminding us that thus far there is no universally accepted deformation structure that can be considered positively diagnostic for ETS in the exhumed geological record of subduction zones. Subduction-related heterogeneities such as “block-in-matrix” type fabrics, or tightly juxtaposed lithologies with different rheology, widespread evidence of broadly coeval alternating brittle and ductile deformation, and of cyclically elevated pore pressure and low differential stress might all be direct geological records of ETS. The geological record that we can access, however, is the end result of a long evolution occurring at different depths, temperatures or time throughout the subduction history and its interpretation is always challenging. Hitherto, the geological structures that are potentially ascribable to ETS are documented from accretionary wedge domains12,13,14 or subducted oceanic crust15,16,17, whereas they are scanty in subducted continental crust18,19. Further geological work is, therefore, necessary to better characterize the record of ETS in fossil geological settings10,11 and use it to refine the understanding of active megathrusts.
Here we present original data from the fossil subduction interface of the Northern Apennines (Italy), specifically from subducted continental metasediments deformed at blueschist facies conditions. These metasediments are composed of heterometric, rheologically strong blocks embedded in a weaker matrix containing dilational shear veins and ductile mylonitic shear zones formed broadly coevally. Thermodynamic modelling constrains the formation of both veins and mylonites to high pressure conditions (at least 1 GPa and 350 °C). We conclude that these structures formed due to cyclic brittle and ductile deformation steered by fluctuating pore pressure, transiently reaching near-lithostatic values. These structures might represent a geological record of deep ETS, as defined by11, in continental metasediments.
Results
A likely geological record of deep ETS in continental metasediments
The Apennines formed due to the convergence and successive collision of the European and African plates from the Late Eocene (e.g.20, Supplementary Fig. 1). The internal Northern Apennines are characterized by unmetamorphosed continental and oceanic units stacked with their metamorphic counterparts. The metamorphosed oceanic units derive from the Ligure-Piemontese oceanic basin, whereas the continental units originate from the former Tethyan passive distal continental margin of the stretched Adria plate (e.g.21,22). Initial subduction of oceanic crust was followed by subduction of this distal continental margin, as attested to by metamorphic high pressure-low temperature conditions between 0.8–1.6 GPa and 300–500 °C (summary of pressure and temperature (P–T) conditions in23). In particular, carpholite and lawsonite in the metamorphic parageneses from metamorphosed continental and oceanic units suggest relatively cold geothermal gradients of c. 8–10 °C/km during subduction (e.g.22,24).
The metamorphosed continental units in the study area are composed of a several 100-m-thick Middle-Low Triassic metasedimentary clastic sequence comprising alternating metaconglomerate, metaquartzarenite and metapelite layers and is regionally referred to as Verrucano Formation25 (Supplementary Fig. 1d). The Verrucano Formation (traditionally called “Verrucano") is indeed of regional importance as it crops out over an area of ~ 12,000 km2 in the Northern Apennines. In the study area, the Verrucano is intensely deformed, with mechanically competent metaconglomerate and metaquartzarenite layers stretched and boudinaged and enveloped by less competent metapelite (Figs. 1a,b and 2a,b; GPS coordinates in Supplementary Table 1). As a whole, it forms a so-called “broken formation”, defined as a “disrupted rock unit with a block-in-matrix fabric, which contains no exotic blocks but only native components”26,27 (Fig. 1c,d). The observed structures crop out over an area of ~ 1 km2.
Diffuse ductile deformation is therein characterized by shear zones at all scales, with a mylonitic blueschist facies foliation defined by aligned carpholite, phengitic muscovite (Si content > 3 apfu) and quartz wrapping around clastic quartz grains and producing asymmetric pressure shadows composed of quartz, carpholite and muscovite (Fig. 2c–f and Supplementary Fig. 2; details in Supplementary). The metaconglomerate and metaquartzarenite may contain quartz clasts displaying evidence of compenetration at sites of high normal stress and asymmetric pressure shadows occurring at sites of low normal stress (i.e., perpendicular and parallel to the foliation, respectively). In between two compenetrated grains, phyllosilicates may locally occur and in the pressure shadows quartz is finer grained and overgrows epitactically the clasts (Fig. 2d–f). These microstructures evidence deformation mainly by dissolution–precipitation creep (e.g.28).
Localized brittle deformation is also common and is expressed by tension gashes, dilational step-overs and dilational shear veins occurring in the three lithotypes. Dilational step-overs and tension gashes occur mainly in the stronger lithotypes oriented at high angle to the foliation (~ 70–80°; Fig. 2g,h), whereas dilational shear veins are subparallel to the foliation and are more common in metapelite (Fig. 3a–e). In the metaconglomerate and metaquartzarenite, dilational shear veins may be up to 1 m long, a few decimetres thick and can form up to ~ 10% of the entire volume of the rock. In the metapelite, dilational shear veins can be several metres long and up to a few decimetres thick and locally represent 50% of the rock volume. In all lithotypes vein geometry is from straight to winding (Figs. 1, 2g,h and 3a–e).
The veins are composed of quartz and carpholite fibres, some decimetres long, and minor carbonate (Figs. 2g,h and 3a,b). The fibres are iso-oriented, and parallel and perpendicular to the vein boundaries in the dilational shear veins and tension gashes, respectively. They are also parallel to the host-rock stretching lineation, which is defined by phengitic muscovite, quartz and carpholite grains. Both vein fibres and stretching lineation plunge gently to the E-NE, with only a few scattered vein fibres plunging to the N; the mylonitic foliation dips gently to the E (Fig. 4a). Dilational shear veins exhibit crack-and-seal textures. At the outcrop, fibres are locally cut across by thin sets of parallel fractures oriented perpendicularly to the fibre long dimension (i.e. perpendicular to the stretching direction of the fibres) and perpendicular to the foliation, marking successive growth increments (Figs. 2h and 3b).
In thin section, quartz fibres appear as up to a few centimetres long and display undulose extinction (Figs. 3e and 4b). They are monocrystalline, as visible in the optical scans of the thin sections with the gypsum plate inserted, and have high aspect ratios (up to 30; Supplementary Fig. 3a). They are locally recrystallized, leading to a significant grain size reduction down to some tens of microns and low aspect ratios for the new grains. Quartz fibres contain abundant fluid inclusion bands with both liquid and vapor phases29 oriented perpendicular to the long dimension of the grains (i.e. perpendicular to the foliation; Fig. 4b,c and Supplementary Fig. 4a–d). Spacing between the inclusion bands is in the order of a few tens of microns, although some variability exists between adjacent bands. Similar microfractures are also present in the carpholite fibres (see next sections), although along those fractures fluid inclusions bands are not observed. This type of microstructure has been interpreted by12,30 as resulting from incremental crack-and-seal growth of the dilational shear veins (see also sketch of Fig. 3c). In the text below, these veins will be referred to as dilational hydroshear veins, as defined by31. Additionally, phengitic muscovite layers occur between quartz and carpholite fibres, suggesting opening of the dilational hydroshear veins at high angle to the foliation along the low-shear strength foliation planes that are locally exploited as slip surfaces, according to the model of12,32 (Fig. 3c–e). Summarizing, these microstructures reflect the incremental epitaxial growth of the fibres by repeated brittle failure and sealing of the fracture coupled to slip along the phengitic muscovite-rich bands during overall ductile deformation of the host rock (see sketch in Fig. 3c).
Locally, quartz bands display incipient boudinage, with muscovite in the boudin necks (Figs. 3c and 4b and Supplementary Fig. 4a–d). Carpholite fibres are also boudinaged and finer-grained carpholite and quartz occur in the boudin necks, suggesting that boudinage formed coevally with the documented incremental cracking and sealing (Fig. 4d,e and Supplementary Fig. 4e–h). Some veins are locally intensely folded by non-cylindrical folds, both at the meso- and microscale (Figs. 1f and 5). Carpholite is stable within fold hinges and is oriented parallel to the axial plane, supporting the conclusion that carpholite was stable at the time of folding (Fig. 5e,f). Additionally, folding is limited to some bands, leaving surrounding veins undeformed and suggesting that several episodes of dilational hydroshear vein formation occurred (Fig. 5g,h). Locally, folded dilational hydroshear veins are cut by a younger generation of quartz and carpholite veins (Fig. 6). Based on the presented meso- and microstructural data, several episodes of vein formation are to be postulated and cyclic brittle and ductile deformation are likely to have alternated at similar P–T conditions (see below).
Dilational hydroshear veins forming at 30–40 km of depth
The presence of syn-deformational carpholite in the dilational hydroshear veins suggests that fracturing and veining occurred at blueschist facies conditions, i.e. at high pressure and low temperature within the subduction channel (e.g.24,33). Quantitative compositional X-ray mapping reveals the presence of microcracks in the carpholite grains oriented perpendicular to the long dimension of the grains (i.e., perpendicular to the stretching direction) that are sealed by a second generation of carpholite with higher XMg content (XMg = Mg/(Fe2+ + Mg); Fig. 7a–c and Supplementary Table 2). This is consistent with the quartz microstructure constraining vein growth by incremental crack-seal, with repeated fracturing and sealing of the dilational hydroshear veins by mineral precipitation, as proposed by12,30 (Figs. 3b,c and 4b–e and Supplementary Fig. 4).
Thermodynamic modelling was carried out using an X-ray mapping approach that allowed us to extract the local bulk composition of the studied microstructures34,35 (see “Methods”; Fig. 7 and Supplementary Fig. 3 and Table 3). Results constrain P–T conditions of at least 1 GPa and 300–350 °C for the formation of both the high-pressure veins (Sample A, Fig. 3a–e) and the mylonitic foliation in the metapelite (Sample B, Fig. 3f–i), similarly to what previously reported for this geological unit29 (Fig. 8a,b; details available in Supplementary).
Discussion
The Verrucano bears evidence of brittle dilational hydroshearing and ductile shearing alternating cyclically during subduction at temperatures typical of the brittle-ductile transition zone (350–450 °C in36,37). Importantly, this zone can occur at greater depths than usual in cold subduction zones, where, as in the case of the Northern Apennines, a low geothermal gradient of 8–10 °C/km was present (data from this study and from22,23,29). Both veins and foliation formed at pressure conditions typical of c. 30–40 km depth. This depth corresponds to the lower limit of the seismogenic zone of some subduction megathrusts, where deep ETS are generally reported (e.g.5,11,38; Fig. 8c). Examples of ETS occurring in subduction settings with comparable geothermal gradients as in the Northern Apennines include the seismologically active modern subduction zones of New Zealand, Costa Rica, Alaska and SW Japan as well as fossil and exhumed subduction settings such as the Cyclades in Greece and the Italian Western Alps (Fig. 1 of10 and Fig. 3 of11 and references therein). Additionally, deep ETS are also reported from seismologically active modern subduction zones involving continental crust. This is the case of the southern Central Range of Taiwan, characterised by warmer geothermal gradients compared to the Northern Apennines. In this geological context, deep ETS occur between 15 and 45 km and are linked to metamorphic dehydration reactions happening within the subducting continental crust and producing high pore pressure and failure along low dipping thrust faults39,40.
Dilational hydroshear veins in subducted metasediments are thus interpreted as possible evidence of ETS and suggest the presence of pore pressure transiently exceeding the least principal compressive stress, roughly equivalent to near-lithostatic values in subduction settings12,32,36. Hence, we propose that the studied brittle structures likely correspond to the geological record of tremors documented by the seismologic data, while ductile deformation relates to slow slip in the geodetic data, as suggested by7,12,15,32,41. Moreover, our estimated P–T range corresponds to conditions typical for dehydration reactions in Ca-poor metasediments. Between 0.5 GPa–200 °C and 1.9 GPa–550 °C, the main hydrous minerals in Ca-poor metasediments are kaolinite (containing 14 weight percent (wt%) of H2O bounded in the crystal structure), pyrophyllite (5 wt%), chlorite (10–14 wt%), carpholite (10–11.5 wt%), chloritoid (7 wt%), muscovite (4.3 wt%) and paragonite (4.6 wt%; Fig. 8a,b). Above 0.8 GPa, carpholite can form from chlorite, kaolinite and pyrophyllite destabilization through the following reactions42 (mineral abbreviation from43):
Between 350 and 550 °C, carpholite progressively destabilizes to form chloritoid:
A direct correlation exists between the carpholite modal amount (volume percent-vol%) and the H2O content of the mineral phases (wt%) above 0.8 GPa (Supplementary Fig. 5). In our samples, carpholite decreases from 42 and 63 vol% (sample A and B, respectively) to 0 vol% between 1 GPa–300 °C and 1.8 GPa–500/550 °C (Supplementary Fig. 5c,h). This decrease matches the content of H2O in solids, from 7–8 wt% for sample A and B, respectively, to 4.6 wt% for both samples (Supplementary Fig. 5b,g). For our P–T conditions, the decrease in carpholite is balanced by chloritoid increase (Supplementary Fig. 5e,l). However, the net aqueous fluid release from the sample is positive, due to a lower amount of H2O per formula unit of chloritoid compared to carpholite.
Carpholite-rich veins can, therefore, act as a syn-deformation trap for H2O released from chlorite-out reactions, because a significant amount of H2O can be stored in the carpholite structural formula. Successively, this aqueous fluid can be released deeper down in the subduction channel, at a temperature higher than 350 °C, as the carpholite-out reaction is temperature dependent (Fig. 8a,b). Therefore, especially in cold subduction zones, carpholite can be stable down to ~ 60 km. Our estimates of 2.4–3.4 wt% of H2O release due to the carpholite-out reaction are maximum amounts. We intentionally selected samples that represent the higher spectrum of the carpholite vol% visible in the field, and we modelled dilational hydroshear veins and metapelite characterised by carpholite-rich bands (Supplementary Table 3). However, ~ 0.5–1 wt% of H2O release can be regarded as representative for the Verrucano broken formation, assuming a 5–15 vol% of carpholite as average value.
We thus propose carpholite to be one important H2O carrier in poor-Ca metasediments. This possibility has been overlooked2 or considered minor44, likely due to the restricted carpholite stability field, which is limited to cold subduction zones and poor-Ca metasediments, and to the ready destabilization of carpholite as temperature increases at the beginning of exhumation due to the relaxation of depressed isotherms24. We suggest carpholite to have destabilized in the studied fossil subduction channel starting only a few km deeper than the investigated samples, thus affecting the local rheological behaviour of the subduction interface. Most likely, also the dehydration of nearby oceanic units contributed to the fluid budget of the studied subduction interface, as above 350 °C the lawsonite-out dehydration reaction occurs (e.g.2,45,46,47,48). These data suggest that the described metamorphic dehydration reactions provide batches of aqueous fluid whenever a subducting volume of rocks crosses a dehydration reaction, leading to pore pressure fluctuations and brittle-ductile cyclicity, as proposed by14,45,49,50 and as also suggested for the Northern Apennines51.
The studied subduction interface is characterized by a broken formation, with more competent blocks in a weaker matrix. This is a scale-invariant feature, which is readily recognised from the macro- and meso- to the micro scale (Figs. 1, 2a,b and 3c–e). In metaconglomerate and metarenite, detrital quartz grains behave as rigid objects in a weaker ductile matrix composed of newly crystallised quartz, carpholite and muscovite grains growing in the strain shadows (Fig. 2c–f). Carpholite is stronger than quartz and is locally fractured and boudinaged, with quartz filling the boudin necks (Fig. 4d,e and Supplementary Fig. 4e–h). Quartz layers are more competent than the adjacent muscovite bands and display incipient boudinage (Figs. 3c and 4b,c). Such a “block in matrix” behaviour is similar to what described in52 for shallower geological settings. We cannot exclude that a “block in matrix” structure could have also been acquired at shallow structural levels at the onset of subduction27 and/or during the exhumation path “en route” to surface. However, the described ubiquitous foliation and dilational hydroshear veins and, more importantly, the presence of synkinematic carpholite and phengitic muscovite in boudins, boudin necks and matrix (Figs. 2a,b and 3c–e) constrain formation of these structures to the peak P–T recorded by these rocks. A later retrograde greenschist facies overprint is locally observed at the micro- and meso scale, where both blueschist facies foliation and veins are deformed by upright folds and S-C-C′ planes associated with chlorite (Supplementary Figs. 6 and 7; details available in Supplementary).
Episodic jamming of more competent blocks can occur during deformation, forming a transient load-bearing, more competent network of competent blocks and minor deformation in the surrounding weak matrix53. Jamming can cause fracturing of the blocks and surrounding matrix and distributed ductile deformation in the matrix53. Nevertheless, the peculiarity of the studied field site is that structures ascribable to both brittle and ductile deformation are found in all lithotypes, irrespective of their competence (Fig. 8d), comparable to what observed in metasediments deformed at similar temperatures but at much shallower depths12. This style of deformation is different from what reported by15,41, where brittle deformation is reported as only occurring in the more competent blocks, and ductile deformation is mostly limited to the surrounding weaker matrix.
In the Verrucano, metapelite and phyllosilicate-rich layers acted as seals that maintained overpressure and allowed for preferential fluid flow parallel to the mesoscopic planar anisotropy defined by the foliation and lithological boundaries50. Such conditions are highly favourable for the opening of dilational hydroshear veins, once critical overpressure conditions are met32. Successively, the stark competence contrast between blocks and matrix in the Verrucano likely induced local kinematic flow perturbations, inducing the non-cylindrical folding of both dilational hydroshear veins and foliation (Figs. 1c and 5). Finally, folded dilational hydroshear veins are cut by a younger generation of quartz and carpholite veins, attesting to the cyclic character of both brittle and ductile deformation (Fig. 6).
Concluding, we propose that the studied geological structures may represent the fossil record of deep ETS, which would have led to cyclic brittle and ductile deformation within the subduction channel at > 30 km depth. Pore pressure is proposed as the main trigger of cyclicity, repeatedly and transiently reaching near-lithostatic values due to metamorphic dehydration reactions occurring in both oceanic and continental rocks. We identify the carpholite-out reaction as one such reaction for metasediments poor in Ca, and carpholite as one of the carriers of H2O down to 30–60 km depth in cold subduction zones. Phyllosilicate-rich rocks can act as relatively low-permeability barriers that maintain overpressure and allow for fluid flow to preferentially occur parallel to the foliation and lithological boundaries. Our results suggest reconsidering the role of quartz-carpholite veins forming coevally with metamorphic foliation as a possible record of deep ETS in similar geological settings of other convergent orogens, including the Alps54, Tukey55, Crete56, Oman57, the Svalbard24 and New Caledonia58.
Methods
Thin sections were cut parallel to the stretching lineation (X = Ls in the sketch shown in Figures and in Supplementary Figures) and perpendicular to the mylonitic foliation (Z parallel to the pole to the mylonitic foliation in the sketch shown in figures).
Electron probe micro-analyser (EPMA) and X-ray compositional map elaboration
EPMA analysis was performed on carbon-coated thin sections using a JEOL JXA-8200 electron microprobe at the Department of Earth Sciences of the University of Milano (Italy). Backscattered electron images (BSE) were acquired using an accelerating voltage of 15 keV, a beam current of 5 nA, and a working distance of 11 mm. Point analyses and X-ray compositional maps were acquired using wavelength-dispersive spectrometers. Point analyses were acquired first, before the X-ray compositional maps on the same area. Analytical conditions of point analysis were a 15 keV accelerating voltage, a 5 nA beam current and a beam ø of ~ 1 μm. Nine oxide compositions were measured, using the following standards: grossular (SiO2/Al2O3/CaO), fayalite (FeO), forsterite (MgO), K-feldspar (K2O), omphacite (Na2O), ilmenite (TiO2), and rhodochrosite (MnO). Analytical conditions for Xray map acquisition were a 15 keV accelerating voltage, a 100 nA specimen current, and 50 ms dwell times. Nine elements (Si, Ti, Al, Fe, Mn, Mg, Na, Ca, and K) were measured at the specific wavelength in two passes. X-ray maps were processed using XMapTools34 and intensity X-ray maps were standardized to concentration maps of oxide weight percentage using spot analyses as the internal standard.
Thermodynamic modelling
The Gibbs free energy minimization algorithm Theriak–Domino59 was used to compute the isochemical equilibrium phase diagrams, mineral isopleths, and diagrams of the H2O content in solids and modal amount of the hydrous mineral phases. The thermodynamic database of60, based on61, was used. All Gibbs free energy minimizations were computed with an excess in pure H2O fluid. Local bulk compositions were obtained using standardized X-ray maps, following the procedure described in35, removing the Fe content of hematite, as in60. Fe3+ was ignored because of its subtle content or absence in the studied mineral phases (Supplementary Table 2). Ca and Mn were removed from the input composition because of their minor content (Supplementary Table 3). Plots of vol% of the hydrous mineral phases and wt% of H2O in solids were computed along a prograde P–T path valid for the Northern Apennines, based on data from this study and from23 (Supplementary Fig. 5).
Data availability
All data generated or analysed during this study are available within this published article (and its Supplementary Information files).
References
Peacock, S. M. Fluid processes in subduction zones. Science 248, 329–337 (1990).
Schmidt, M. W. & Poli, S. 4.19—devolatilization during subduction. In (eds. Holland, H. D. & Turekian, K. K. B. T.-T. on G. 2nd ed, 669–701 (Elsevier, 2014). https://doi.org/10.1016/B978-0-08-095975-7.00321-1.
Dragert, H., Wang, K. & James, T. S. A silent slip event on the deeper cascadia subduction interface. Science 292, 1525–1528 (2001).
Obara, K. Nonvolcanic deep tremor associated with subduction in Southwest Japan. Science 296, 1679–1681 (2002).
Shelly, D. R., Beroza, G. C., Ide, S. & Nakamula, S. Low-frequency earthquakes in Shikoku, Japan, and their relationship to episodic tremor and slip. Nature 442, 188–191 (2006).
Saffer, D. M. & Tobin, H. J. Hydrogeology and mechanics of subduction zone forearcs: Fluid flow and pore pressure. Annu. Rev. Earth Planet. Sci. 39, 157–186 (2011).
Bernaudin, M. & Gueydan, F. Episodic tremor and slip explained by fluid-enhanced microfracturing and sealing. Geophys. Res. Lett. 45, 3471–3480 (2018).
Obara, K. & Kato, A. Connecting slow earthquakes to huge earthquakes. Science 353, 253–257 (2016).
Gao, X. & Wang, K. Rheological separation of the megathrust seismogenic zone and episodic tremor and slip. Nature 543, 416–419 (2017).
Kirkpatrick, J. D., Fagereng, Å. & Shelly, D. R. Geological constraints on the mechanisms of slow earthquakes. Nat. Rev. Earth Environ. https://doi.org/10.1038/s43017-021-00148-w (2021).
Behr, W. M. & Bürgmann, R. What’s down there? The structures, materials and environment of deep-seated slow slip and tremor. Philos. Trans. R. Soc. A Math. Phys. Eng. Sci. 379, 20200218 (2021).
Fagereng, Å., Remitti, F. & Sibson, R. H. Incrementally developed slickenfibers—Geological record of repeating low stress-drop seismic events?. Tectonophysics 510, 381–386 (2011).
Barnes, P. M. et al. Slow slip source characterized by lithological and geometric heterogeneity. Sci. Adv. 6, eaay3314 (2020).
Muñoz-Montecinos, J., Angiboust, S., Cambeses, A. & García-Casco, A. Multiple veining in a paleo–accretionary wedge: The metamorphic rock record of prograde dehydration and transient high pore-fluid pressures along the subduction interface (Western Series, central Chile). Geosphere 16, 765–786 (2020).
Behr, W. M., Kotowski, A. J. & Ashley, K. T. Dehydration-induced rheological heterogeneity and the deep tremor source in warm subduction zones. Geology 46, 475–478 (2018).
Tarling, M. S., Smith, S. A. F. F. & Scott, J. M. Fluid overpressure from chemical reactions in serpentinite within the source region of deep episodic tremor. Nat. Geosci. 12, 1–9 (2019).
Giuntoli, F., Vitale Brovarone, A. & Menegon, L. Feedback between high-pressure genesis of abiotic methane and strain localization in subducted carbonate rocks. Sci. Rep. 10, 9848 (2020).
Angiboust, S. et al. Probing the transition between seismically coupled and decoupled segments along an ancient subduction interface. Geochem. Geophys. Geosyst. 16, 1905–1922 (2015).
Molli, G., Menegon, L. & Malasoma, A. Switching deformation mode and mechanisms during subduction of continental crust: A case study from Alpine Corsica. Solid Earth 8, 767 (2017).
Doglioni, C., Gueguen, E., Harabaglia, P. & Mongelli, F. On the origin of west-directed subduction zones and applications to the western Mediterranean. Geol. Soc. Lond. Spec. Publ. 156, 541–561 (1999).
Molli, G. Northern Apennine-Corsica orogenic system: An updated overview. Geol. Soc. Lond. Spec. Publ. 298, 413–442 (2008).
Jolivet, L. et al. Midcrustal shear zones in postorogenic extension: Example from the northern Tyrrhenian Sea. J. Geophys. Res. Solid Earth 103, 12123–12160 (1998).
Bianco, C. et al. The lawsonite-glaucophane blueschists of Elba Island (Italy). Lithos 348, 105198 (2019).
Agard, P., Labrousse, L., Elvevold, S. & Lepvrier, C. Discovery of Paleozoic Fe-Mg carpholite in Motalafjella, Svalbard Caledonides: A milestone for subduction-zone gradients. Geology 33, 761–764 (2005).
Azzaro, E. et al. Geology and petrography of the Verrucano and Paleozoic formations of southern Tuscany and Northern Latium (Italy). In The Continental Permian in Central, West, and South Europe (ed. Falke, H.) 181–195 (Springer Netherlands, 1976). https://doi.org/10.1007/978-94-010-1461-8_15.
Hsü, K. J. Principles of melanges and their bearing on the Franciscan-Knoxville paradox. Geol. Soc. Am. Bull. 79, 1063–1074 (1968).
Festa, A., Pini, G. A., Ogata, K. & Dilek, Y. Diagnostic features and field-criteria in recognition of tectonic, sedimentary and diapiric mélanges in orogenic belts and exhumed subduction-accretion complexes. Gondwana Res. 74, 7–30 (2019).
Bell, T. H., Rubenach, M. J. & Fleming, P. D. Porphyroblast nucleation, growth and dissolution in regional metamorphic rocks as a function of deformation partitioning during foliation development. J. Metamorph. Geol. 4, 37–67 (1986).
Rossetti, F. et al. Syn-versus post-orogenic extension: The case study of Giglio Island (Northern Tyrrhenian Sea, Italy). Tectonophysics 304, 71–93 (1999).
Cox, S. F. & Etheridge, M. A. Crack-seal fibre growth mechanisms and their significance in the development of oriented layer silicate microstructures. Tectonophysics 92, 147–170 (1983).
Fagereng, Å., Remitti, F. & Sibson, R. H. Shear veins observed within anisotropic fabric at high angles to the maximum compressive stress. Nat. Geosci. 3, 482–485 (2010).
Ujiie, K. et al. An explanation of episodic tremor and slow slip constrained by crack-seal veins and viscous shear in subduction mélange. Geophys. Res. Lett. 45, 5371–5379 (2018).
Goffe, B., Chopin, C., Goffé, B. & Chopin, C. High-pressure metamorphism in the Western Alps: Zoneography of metapelites, chronology and consequences. Schweizerische Mineral. und Petrogr. Mitteilungen 66, 41–52 (1986).
Lanari, P. et al. XMapTools a Matlab©-based graphic user interface for microprobe quantified image processing. Comput. Geosci. 62, 227–240 (2014).
Lanari, P. & Engi, M. Local bulk composition effects on metamorphic mineral assemblages. Rev. Miner. Geochem. 83, 55–102 (2017).
Sibson, R. H. Tensile overpressure compartments on low-angle thrust faults. Earth Planets Space 69, 113 (2017).
Hyndman, R. D., Yamano, M. & Oleskevich, D. A. The seismogenic zone of subduction thrust faults. Isl. Arc 6, 244–260 (1997).
Ito, Y., Obara, K., Shiomi, K., Sekine, S. & Hirose, H. Slow earthquakes coincident with episodic tremors and slow slip events. Science 315, 503–506 (2007).
Chuang, L. Y., Chen, K. H., Wech, A., Byrne, T. & Peng, W. Ambient tremors in a collisional orogenic belt. Geophys. Res. Lett. 41, 1485–1491 (2014).
Ide, S., Yabe, S., Tai, H.-J. & Chen, K. H. Thrust-type focal mechanisms of tectonic tremors in Taiwan: Evidence of subduction. Geophys. Res. Lett. 42, 3248–3256 (2015).
Hayman, N. W. & Lavier, L. L. The geologic record of deep episodic tremor and slip. Geology 42, 195–198 (2014).
Pourteau, A. et al. Multistage growth of Fe–Mg–carpholite and Fe–Mg–chloritoid, from field evidence to thermodynamic modelling. (2014) https://doi.org/10.1007/s00410-014-1090-7.
Whitney, D. L. & Evans, B. W. Abbreviations for names of rock-forming minerals. Am. Miner. 95, 185–187 (2010).
Bebout, G. E., Agard, P., Kobayashi, K., Moriguti, T. & Nakamura, E. Devolatilization history and trace element mobility in deeply subducted sedimentary rocks: Evidence from Western Alps HP/UHP suites. Chem. Geol. 342, 1–20 (2013).
Fagereng, Å. & Diener, J. F. A. A. Non-volcanic tremor and discontinuous slab dehydration. Geophys. Res. Lett. 38, 1–5 (2011).
Peacock, S. M. The importance of blueschist → eclogite dehydration reactions in subducting oceanic crust. Bull. Geol. Soc. Am. 105, 684–694 (1993).
Condit, C. B., Guevara, V. E., Delph, J. R. & French, M. E. Slab dehydration in warm subduction zones at depths of episodic slip and tremor. Earth Planet. Sci. Lett. 552, 116601 (2020).
Vitale Brovarone, A. & Beyssac, O. Lawsonite metasomatism: A new route for water to the deep Earth. Earth Planet. Sci. Lett. 393, 275–284 (2014).
Burlini, L., Toro, G. Di, Meredith, P., Di Toro, G. & Meredith, P. Seismic tremor in subduction zones: Rock physics evidence. Geophys. Res. Lett. 36, L08305 https://doi.org/10.1029/2009GL037735 (2009).
Peacock, S. M., Christensen, N. I., Bostock, M. G. & Audet, P. High pore pressures and porosity at 35 km depth in the Cascadia subduction zone. Geology 39, 471–474 (2011).
Agostinetti, N. P., Bianchi, I., Amato, A. & Chiarabba, C. Fluid migration in continental subduction: The Northern Apennines case study. Earth Planet. Sci. Lett. 302, 267–278 (2011).
Fagereng, Å. & Sibson, R. H. Mélange rheology and seismic style. Geology 38, 751–754 (2010).
Beall, A., Fagereng, Å. & Ellis, S. Fracture and weakening of jammed subduction shear zones, leading to the generation of slow slip events. Geochem. Geophys. Geosyst. 20, 4869–4884 (2019).
Bousquet, R., Oberhänsli, R., Goffé, B., Jolivet, L. & Vidal, O. High pressure-low temperature metamorphism and deformation in the ‘Bündnerschiefer’ of the Engadine window (eastern Central Alps): Implications for regional evolution. J. Metamorph. Geol. 16, 653–674 (1998).
Rimmelé, G. et al. First evidence of high-pressure metamorphism in the “Cover Series” of the southern Menderes Massif. Tectonic and metamorphic implications for the evolution of SW Turkey. Lithos 71, 19–46 (2003).
Viswanathan, K. & Seidel, E. Crystal chemistry of Fe-Mg-carpholites. Contrib. Miner. Petrol. 70, 41–47 (1979).
El-Shazly, A. E. K. Petrology of Fe-Mg-carpholite-bearing metasediments from NE Oman. J. Metamorph. Geol. 13, 379–396 (1995).
Black, P. M., Maurizot, P., Ghent, E. D. & Stout, M. Z. Mg–Fe carpholites from aluminous schists in the Diahot region and implications for preservation of high-pressure/low-temperature schists, northern New Caledonia. J. Metamorph. Geol. 11, 455–460 (1993).
de Capitani, C. & Petrakakis, K. The computation of equilibrium assemblage diagrams with Theriak/Domino software. Am. Miner. 95, 1006–1016 (2010).
Pourteau, A. et al. Multistage growth of Fe–Mg–carpholite and Fe–Mg–chloritoid, from field evidence to thermodynamic modelling. Contrib. Miner. Petrol. 168, 1090 (2014).
Berman, R. G. Internally consistent thermodynamic data for minerals in the system Na2O-K2O-CaO-MgO-FeO-Fe2O3-Al2O3-SiO2-TiO2-H2O-CO2. J. Petrol. 29, 445–522 (1988).
Acknowledgements
We warmly acknowledge Stefano Poli and Andrea Risplendente for the acquisition of the EPMA data. We acknowledge the constructive comments and suggestions by Åke Fagereng and an anonymous reviewer and Christopher Scholz for the editorial handling. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 839779.
Author information
Authors and Affiliations
Contributions
The study concept was formulated by F.G. and G.V. F.G.: Fieldwork, sample preparation, data acquisition, elaboration and figure preparation. G.V.: Fieldwork, data elaboration. Both authors wrote the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Giuntoli, F., Viola, G. A likely geological record of deep tremor and slow slip events from a subducted continental broken formation. Sci Rep 12, 4506 (2022). https://doi.org/10.1038/s41598-022-08489-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-08489-2
This article is cited by
-
Syn-exhumation metasomatic glaucophane-phengite-quartz veins formed at moderate pressures: exploring the control of fO2 and bulk composition on nominally HP metamorphic assemblages
Contributions to Mineralogy and Petrology (2024)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.