Correction to: Scientific Reports https://doi.org/10.1038/s41598-020-68370-y, published online 21 August 2020


This Article contains a typographical error in the Results section under subheading ‘Mechanical properties’ where,


“The compressive strength of the scaffolds calculated as the maximum compression force divided by the cross-sectional area of tested specimen, was 87.4 ± 22.1 and 6.5 ± 0.8 MPa for ATE-G3 and Repros (BCP) scaffolds, respectively.”


should read:


“The compressive strength of the scaffolds calculated as the maximum compression force divided by the cross-sectional area of tested specimen, was 8.7 ± 2.2 and 6.5 ± 0.8 MPa for ATE-G3 and Repros (BCP) scaffolds, respectively.”