Until now, the reported diversity of representatives from the genus Hantzschia inhabiting soils from different parts of Eurasia was limited to the few species H. amphioxys, H. elongata and H. vivax and some of their infraspecific taxa. We have studied the morphology, ultrastructure and phylogeny of 25 soil diatom strains, which according to published description would be assigned to “H. amphioxys sensu lato” using 18S rDNA, 28S rDNA and rbcL. We show that strains are made up of seven different species of Hantzschia, including five new for science. Five strains were identified as H. abundans. This species has a slight curvature of the raphe near its external proximal ends. Four of the examined strains were represented by different populations of H. amphioxys and their morphological characteristics fully correspond with its isolectotype and epitype. The main specific features of this species include 21–25 striae in 10 μm, 6–11 fibulae in 10 μm, 40–50 areolae in 10 μm and internal proximal raphe endings bent in opposite directions. H. attractiva sp. nov., H. belgica sp. nov., H. parva sp. nov., H. pseudomongolica sp. nov. and H. stepposa sp. nov. were described based on differences in the shape of the valves, significant differences in dimensions, a lower number of striae and areolae in 10 μm and the degree and direction of deflection of the internal central raphe endings. Based on the study of the morphological variability and phylogeny of soil Hantzschia-species from different geographical locations we conclude that while some species such as H. amphioxys are truly cosmopolitan in their distributions, some sympatric populations of pseudocryptic taxa exist in the Holarctic.
Diatoms are one of the most widespread group of unicellular algae, being reported from all types of water bodies and from all continents1. Currently, two hypotheses about freshwater diatom distribution are being discussed; one suggesting that all or most diatom species have a cosmopolitan distribution2,3 and the second that restricted geographic distributions and even endemicity are more common4,5. On the one hand, capacity for dispersal, wide environmental tolerances and interbreeding between morphologically distinct units should result in wide, perhaps ubiquitous distributions6,7,8. On the other hand, current careful investigation of taxonomy and distribution of diatoms5,9,10,11,12 and other microorganisms13,14 have shown that unicellular organisms can be specific to restricted areas. Due to the long history of references that Hantzschia amphioxys (Ehrenberg) Grunow has a cosmopolitan distribution15,16,17, an investigation of the global distribution of this species is an important tool for our understanding of global diatom biogeography.
Until recently, the genus Hantzschia Grunow included less than 50 species known from different parts of the world and from different water ecosystems like freshwater and saline waterbodies, terrestrial and soil ecosystems1. Many new species from this genus were described during the last decade. Over 250 described taxa are currently known from the genus Hantzschia18. Main morphological features that are used for species delimitation are number of striae and areolae, position and shape of fibulae, the degree and direction of deflection of the external and internal central raphe endings and the shape of the frustule19.
The first drawings of valves, which later became the basis for the description of Hantzschia amphioxys, were made by C.G. Ehrenberg for several diatoms found in samples from the Americas, including the Falkland Islands, Peru, French Guiana and Labrador Peninsula in 1843; the valve from the Labrador was designated as lectotype20. Initially, the species was described as Eunotia amphioxys21. A. Grunow, discussing new species of diatoms from Honduras, introduced the new genus Hantzschia, which included five species previously from the genera Eunotia Ehrenberg, Nitzschia Hassall and Epithemia Kützing22.
C.S. Boyer23 chose the species Eunotia amphioxys as type for the genus Hantzschia. The further history of the study of H. amphioxys is associated with the accumulation of much material such as distributional reports on this species from around the world, and the inclusion of specimens reported under this name in taxonomic references and floristic studies. In parallel with this, there was an improvement in the methods of algal research, including the application of scanning and transmission electron microscopy, both of which contributed to the identification of new and taxonomically-important features for distinguishing between diatom species. For more than 150 years in the study of H. amphioxys, the diagnosis of this species has undergone numerous refinements and revisions. By the end of the first decade of the twenty-first century, many, sometimes completely contradictory, diagnoses of the species were the result. For example, the length and width of valves as in different sources include: 20–100 and 5–15 µm24, 20–210 (300) and 13–15 µm25, 15–50 and 5–7 µm19, 36–68 and 6–10 µm16. Such discrepancies in size are also mirrored in the reported number of striae and fibulae in 10 µm. The situation changed in 2014, when R. Jahn, besides designating a lectotype after reviewing the samples of C.G. Ehrenberg, proposed an epitype from a soil strain for H. amphioxys20.
Until now, the diversity of representatives of the genus Hantzschia among soil diatoms was reported as H. abundans Lange-Bertalot, H. amphioxys, H. elongata Grunow and H. vivax (W. Smith) Peragallo, including some of their varieties26,27,28,29,30,31,32,33,34. H. amphioxys, as the most commonly reported species, has been noted to occur in various ecosystems, from diverse soils, including alkaline32 or calcareous26, soils of halophilic, shrub, meadow, and psammophytic phytocenoses30, soil horizons in artificial and natural forests of the steppe zone33,35, forest litter of pine, oak and white acacia plantations36, urban soils37 and disturbed lands38. It was shown that H. amphioxys could dominate even in the steppe soil post-pyrogenic communities39 and in biological soil crusts after the effects of fire29.
At the same time, the adoption of a narrow species concept by many researchers had led to the description of a number of new species within the genus Hantzschia. Thus, 17 new taxa were described by Lange-Bertalot et al.40 mainly from samples from Sardinia, one taxon from springs in Germany41, four species from Xinjiang Province, China18, and five new taxa from fresh water bodies and soil of the South Atlantic islands19. Until recently, many of the described species had been identified as H. amphioxys, which was considered to be a cosmopolitan species.
The predominant use of light microscopy for a long period of time as the main method of studying soil diatoms has led to the conclusion that only a few cosmopolitan species dominate in the soils. However, at the present stage of research, the combination of light and electron scanning microscopy and molecular phylogenetic analyses, can either support cosmopolitanism among soil diatoms or reveal their hidden diversity. Our study presents molecular phylogenetic analyses of 13 novel soil strains of diatom algae, corresponding to H. amphioxys in the broad sense, isolated from soil or forest floor in the steppe, forest-steppe, forest and mountain zones of Eurasia. In addition, we performed morphological studies of 12 original strains by Souffreau et al.16. The results contain a description of five new species of Hantzschia and remarks on the biogeography of H. amphioxys sensu stricto.
Results and discussion
In most of the forest soil samples used in this survey, specimens belonging to the genus Hantzschia are quite common. Based molecular as well as on light microscopy (LM) and scanning electron microscopy (SEM) observations of 25 strains, seven different taxa were recognized. Figure 1 contains the locations of the strain’s habitats. In anticipation of the nomenclatural consequences, we are using the new names already here but will describe them formally later.
The obtained phylogenetic tree for representatives of the different strains Hantzschia contains several large clades, some of which are monophyletic, while others contain several different species names (Fig. 2). In the analyzed tree, the largest clade is represented by different strains of H. amphioxys, the structure of which is described in the corresponding molecular analysis section. At the same time, the most significant is that in the same clade there is strain H. amphioxys D27_008, which has been designated as epitype20. One of the largest is the clade with H. abundans, which, in addition to our strains, and some that have already been published, includes the group of strains referred to as “Hantzschia sp. 3” (Sterre6)e, (Sterre6)f from Souffreau et al.16. We propose to refer to all of these strains as H. abundans. The next clade consists of the new species of H. attractiva and three strains of Hantzschia sp. 2 (Mo1)a, (Mo1)e, (Mo1)m from Souffreau et al.16, the latter we propose to merge into the new species named H. pseudomongolica, which is sister to H. attractiva. Given the topology of the tree and the morphological features of the representatives, we can conclude that there is a close relation between H. abundans and H. attractiva plus H. pseudomongolica. A separate group consists of two clades with sufficient statistical support (likelihood bootstrap, LB 76; posterior probability, PP 100), one of which is represented by two strains of H. parva, and the other with strains of H. cf. amphioxys (Sterre1)f, (Sterre1)h. Another large clade represents a set of strains of Hantzschia sp. 1 and Hantzschia sp. 2 (Mo1)h, (Mo1)l from Souffreau et al.16, among which there are both large cells (86–89 µm length) and smaller ones (37–39 µm length); strains also differ by striation – from 18–20 striae in 10 μm (strain (Mo1)h) to 21–22 in 10 μm (strain (Ban1)h). It is possible that Hantzschia sp. 1 and Hantzschia sp. 2 (Mo1)h, (Mo1)l may be several closely related species. Besides the large clades, there are a number of separate branches in the tree, representing separate strains: Hantzschia sp. 1 (Ban1)d, and the new species H. belgica (H. cf. amphioxys (Sterre3)a from Souffreaua et al.16) and H. stepposa. Interesting is the position of the H. abundans (Tor3)c strain, which is very distant from other representatives of H. abundans and probably is a cryptic taxon, whose taxonomic status needs to be revised.
The absence of nucleotide sequences of the 18S rDNA gene for the Hantzschia strains discussed in Souffreau et al.16 did not allow us to carry out phylogenetic analysis based on three genes (18S rDNA, 28S rDNA and rbcL). However, in GenBank, 18S rDNA sequences are available for other Hantzschia strains, including strain D27_008, for which the nucleotide sequence of the 18S V4 rDNA region is known (NCBI Accession FR873247). Comparison of this sequence with similar ones in our strains shows a similarity of 98.4% (368 bp) with H. amphioxys MZ–BH9, MZ–BH14 and MZ–BH15. At the same time, the 18S V4 rDNA regions of these three strains are identical and they differ from the epitype by four transitions and one transversion. The similarity with the MZ-BH8 strain is somewhat less with 98.1%, due to one transition (transitions), in which it differs both from the rest of our strains and from the epitype. Also, for the 18S V4 rDNA region of the H. amphioxys D27_008 strain, compared with all of our H. amphioxys strains, a specific feature is characteristic—the position of one nucleotide (insertion of thymine T). The level of similarity of 98.1–98.4% significantly exceeds the previously calculated rate of 97% for 399/387 bp20 between the strain H. amphioxys D27_008 and the strain H. amphioxys var. major A4 (NCBI Accession HQ912404) from Ruck and Theriot42.
The studied Hantzschia strains presented low similarities between the clades indicated in the Fig. 2 and the evolutionary distance matrix based on the partial 28S rRNA gene including the D1-D3 region showed that nine H. abundans strains shared 99.20–99.87% similarities inside the clade, but they shared 95.61–96.67% similarities with H. amphioxys strains, 95.74–96.25% with H. stepposa MZ–BH12 and 96.14–96.54% with H. belgica (Sterre3)a (Supplementary Table S1). Thirteen H. amphioxys strains shared more than 99.07% similarity inside the clade with the greatest differences between SCII and SCIII subclades. Simultaneously, the evolutionary distance matrix showed that H. pseudomongolica strains shared low similarities with Hantzschia species which have central raphe endings internally bent to opposite directions with similarity 96.01–96.54% for H. amphioxys, 96.11% for H. stepposa and 96.54% for H. belgica.
Pairwise comparisons with putatively related taxa showed that strains of H. amphioxys were more than 99.13% similar, however they shared 98.01–98.26% similarities with H. attractiva and less than 98.55% amino acids similarity of ribulose-1,5-bisphosphate carboxylase with H. abundans strains in the analysis (Supplementary Table S2). Amino acids similarity between H. belgica, H. parva and H. stepposa had value less 99%. The percent similarity among aligned amino acids between Hantzschia species had a range of 97.95–100%.
Calculated evolutionary distances for the region D1–D3 of the 28S rRNA gene and amino acid sequence of ribulose-1,5-bisphosphate carboxylase provided strong evidence for H. attractive, H. belgica, H. parva, H. pseudomongolica and H. stepposa as species separate from H. amphioxys and H. abundans, since the intraspecies percent dissimilarity for Hantzschia species was 0.13–0.93% (D1–D3) or 0.59–0.89% (rbcL).
In order to obtain an overview of the diversity and distribution of the diatoms with Hantzschia amphioxys-like morphology, we took soil samples for diatom analysis from steppe, meadow and forest biogeocenoses of Eurasia. In total, we studied 20 soil samples and from these thirteen strains of Hantzschia were isolated. H. attractiva sp. nov., H. belgica sp. nov., H. parva sp. nov., H. pseudomongolica sp. nov. and H. stepposa sp. nov. were described based on differences in the shape of the valves, significant differences in dimensions, a lower number of striae and areolae in 10 μm and the degree and direction of deflection of the internal central raphe ends. Molecular investigations based on two-gene phylogeny and comparison of 18S V4 rDNA sequences supported our results that new species were clearly separated from other Hantzschia species. The remaining species belonged to H. abundans and H. amphioxys.
H. abundans was split off from H. amphioxys by Lange-Bertalot28. The main morphological features of the species (compared to H. amphioxys) were the large sizes of the valves (length up to 80 µm, width up to 10 µm), fewer striae in 10 µm (15–20) and one-sided deviation of the internal proximal raphe ends (Table 1). A soil isolate from a wet meadow dominated by Phalaridetum, which was located 30 m from the river Nidder, Windecken, Hessen, Germany, was chosen as holotype. In general, our strains correspond to the diagnosis of the H. abundans species according to all major morphological characteristics. An exception, however, is the slightly smaller valve length in strain MZ–BH6 (37.5–39 µm, in diagnosis—not less than 40 µm), a smaller valve width in strains MZ–BH1 and MZ–BH6 (6–7 µm, in diagnosis—7–10 µm). We also noted an increase in areolae density up to 50 in 10 µm (40 in 10 µm in diagnosis), although close values (45 in 10 µm) were noted by Zidarova et al.19 for the population of H. abundans from Byers Peninsula, South Shetland Islands. We have not noted the formation of the keel near the raphe from the outer side of the valve in our strains, which, according to Lange-Bertalot28, could indicate an excess of silica in the substrate. From the outer side of the valve in all the studied strains, we noted a slight curvature of the raphe near its central endings, which was not previously noted (Fig. 3m). This feature is more characteristic for different strains of H. amphioxys. According to morphological characteristics such as the width and length of the valve, the number of striae and fibulae 10 μm (supplementary Table S2 in Souffreau et al.16), as well as the position in the phylogenetic tree rbcL–28S rDNA (Fig. 2), we suggest to include the Hantzschia sp. 3 strains (Sterre6)e and (Sterre6)f from Souffreau et al.16 to H. abundans.
H. attractiva sp. nov. is visually and parametrically similar with some Hantzschia species but differs in a number of ways. In terms of the ratio of the length and width of the valve, the shape of its ends and concavity in the center of the ventral side of the valve, H. attractiva is most similar to H. subrupestris Lange-Bertalot28. However, these species can be distinguished from one another by a smaller number of striae (14–16 in 10 μm) and areolae (24 in 10 μm) in H. subrupestris (Table 1). In the case of H. subrupestris, the central raphe ends are straight or barely noticeably deflected in one direction, whereas in H. attractiva they deviate in one direction very clearly. Compared with H. abundans, the diagnostic features of H. attractiva include: less pronounced concavity of the middle part of the valve from the ventral side, vertical position of the valve ends, which are also less pronounced; a larger number of areolae in 10 μm and one-sided deviation of the central raphe ends on both sides of the valve (they are located straight in H. abundans). Our species differs from H. bardii Lange-Bertalot, Cavacini, Tagliaventi et Alfinito in the shape of the valve ends (in H. bardii, they are obliquely cuneate and finally protracted narrow-rostrate to subcapitate), a smaller number of striae in 10 µm and a larger number of areolae40. Of nearly similar size to H. attractiva is H. compactoides Lange-Bertalot, Cavacini, Tagliaventi et Alfinito, which can be distinguished by a more pronounced bend of the valve from the ventral side, the direction of the valve ends in the same direction and their rostrate shape40. Also, H. attractiva is characterized by smaller values of the width of the valve, the greater the number of striae and areolae in 10 µm. Another similar species is H. giessiana Lange-Bertalot et Rumrich28, which characterized by capitate valve ends, a smaller number of areolae in 10 µm (26–30) and the central raphe ends from inner part deviate in opposite directions in comparison with H. attractiva. The lengths 66–70 µm and breadth 7.7–8.9 µm also correspond to the type of H. nematoda Metzeltin, Lange-Bertalot et García-Rodríguez and H. psammicola Garcia-Baptista, which are distinguished from H. attractiva in addition to the shape of the valves by the presence of costae on the outer side of the valve43.
We obtained light and scanning electron micrographs based on the study of the original materials of the strains (Mo1)a, (Mo1)e and (Mo1)m and described H. pseudomongolica sp. nov. Originally the (Mo1)a, (Mo1)e and (Mo1)m strains were presented in Souffreau et al.16 as “H. amphioxys sp. 2”, however, the authors presented only the length and breadth characteristics of the valves without clarifying the taxonomic status or providing an explanation of the isolated position of the strains in the phylogenetic tree in relation to the clade with H. amphioxys (Fig. 4 in Souffreau et al.16). H. mongolica Metzeltin, Lange-Bertalot et Nergui 44 was described from freshwater habitats from Mongolia. This species differs from H. pseudomongolica sp. nov. by its larger valve size (length 80–127 µm and width—15–18 µm) and significantly smaller striae density (11–14 in 10 µm). H. pseudomongolica sp. nov. differs from H. attractiva in both its dimensional characteristics (longer valves and more dense arrangement of striae) and the shape of the valve ends. In H. attractiva the ends are narrowed, broadly-rounded and directed vertically, in H. pseudomongolica the ends are more attenuate, almost capitate, and deflected towards to the dorsal side.
The paratype of H. parva differs from the holotype by somewhat larger valve sizes, namely, 41.5–42.5 µm long and 6–7 µm wide. The large width of the valves, a smaller number of striae in 10 µm and one-sided deviation of the central ends of the raphe from the inside of the valve in H. parva underlines its differences with H. amphioxys (in comparison with the isolectotype20). Compared with H. abundans, H. parva is characterized by having narrower valves (for H. abundans in the range of 7–10 µm), a more dense areola arrangement, lack of a keel near the raphe externally and by the position of the central raphe ends (for H. abundans they are straight internally).
The smallest species of the genus Hantzschia is H. achroma B.E. Volcani et C.-W. Li, which differs from H. parva, in addition to the narrower shape of the valve and tapering valve ends, by a smaller width (up to 4.5 μm), more dense striation (34–35 striae in 10 μm) and a higher fibular density (11–14 in 10 μm)45. In spite of the close dimensions of the valve, described from Uruguay H. delicatula Metzeltin, Lange-Bertalot et García-Rodríguez43 has an almost flat ventral side of the valve and its ends are in almost the same plane as the cuneate, as well as lower density of areolae (30 to 10 μm), which distinguishes it from H. parva (Table 1). The greater width of the valve (9–10 µm), as well as its flattened form on the ventral side, distinguish H. parva from another Uruguayan species H. valdeventricosa Metzeltin, Lange-Bertalot et García-Rodríguez43.
According to its morphometric features, H. stepposa sp. nov. is similar to H. amphioxys. Also, these two species are similar in the deflection of the central raphe ends on the inner side of valve—they curve in opposite directions. Despite this, the two species are easily distinguished by the shape of the valves: H. amphioxys is characterized by a pronounced concavity of the ventral side of the valve in the middle, whereas in H. stepposa, the ventral side is almost straight; in H. amphioxys, the valve ends are clearly directed to the dorsal side of the valve, while in H. stepposa they are arranged vertically. The presence of central raphe ends at the inner side that are deflected in opposite directions distinguishes H. stepposa from most of the known Hantzschia species, whose valve length do not exceed 100 μm (including H. attractiva and H. parva). The only species with a similar position of the central ends of the raphe and up to 100 µm in length is H. giessiana28. However, along with the large size of the valve (50–100 μm), it is also characterized by a completely different shape of the valves—a strongly concave ventral side and ends curved towards it (Table 1).
Originally strain (Sterre3)a was presented in Souffreau et al.16 as “H. cf. amphioxys”, however, the authors presented only the morphometric characteristics and the light micrograph of one valve without clarifying its taxonomic status and explaining its isolated position in the phylogenetic tree in relation to the Hantzschia amphioxys clade (Fig. 4 in Souffreau et al.16). We present light and scanning electron micrographs based on a study of the original material with description of a new species H. belgica sp. nov. In comparison with other Hantzschia species that have internal proximal raphe ends that are deflected in opposite direction (H. amphioxys and H. stepposa), H. belgica differs in shape and direction of the valve ends. If H. amphioxys and H. stepposa are characterized by extended and capitated ends, which are directed to the dorsal side of the valve in H. amphioxys and arranged vertically in H. stepposa, in H. belgica the ends of the valves are not distinctly protracted and not directed to either the dorsal or ventral margins.
A comparative analysis of the main morphological characteristics (length and width of the valves, the number of striae, the number of fibulae and areolae in 10 μm) in the four H. amphioxys strains isolated by us with the proposed diagnoses of Jahn et al.20 of the lectotype and epitype show a coincidence in most data. Small differences can be attributed to the slightly larger maximum length of the valves in strain MZ–BH14 (46.0 μm with a maximum of 44.6 μm in the epitype). The density of the areolae for epitype is in the range of 48–53 areolae in 10 µm (submitted in this study). Some studies indicate the number of areolae in 10 µm for different populations of H. amphioxys in the range of 40–50 areolae in 10 µm19,28. In this regard, the excess of this range is observed only in the strain MZ–BH14, whose density of areolae in the valve can reach 60 in 10 µm.
Based on a detailed study of morphology and ultrastructure, as well as the use of phylogenetic analysis using the 28S rDNA and rbcL genes, our results found 25 soil strains that represent geographically distant populations and formally could be classified as H. amphioxys sensu lato, containing seven different Hantzschia species, including five new for science. Five strains were identified as H. abundans and are fully consistent with the diagnosis of all major morphological characteristics for that taxon. For these strains, we noted areolar densities up to 50 in 10 μm (the original diagnosis reported 40 areolae in 10 μm). Externally, in all the studied strains, we noted a slight curvature of the raphe near its proximal endings, which was not previously reported. In addition, another four of the studied strains represent different populations of H. amphioxys and their morphological characteristics fully correspond to the adopted isolectotype and epitype20. The main specific features of these types include: the presence of 21–25 striae in 10 µm, 6–11 fibula in 10 µm, 40–50 areolae in 10 µm and internal proximal raphe ends curved in opposite directions (Table 1). Five new species were identified on the basis of differences in the shape of valves, the size characteristics of the valves, the number of striae and areolae in 10 μm and the position of the central raphe ends compared to the already known Hantzschia species.
Phylogenetic analysis using the 28S rDNA and rbcL genes showed that adding our strains does not change the tree topology obtained by C. Souffreaua et al.16 for different lines of H. amphioxys. At the same time, the presence of a detailed morphological description of our strains using SEM results made it possible to distinguish morphological differences between the available clades. The connection of the topology of the obtained tree with the morphological features of the isolated strains shows that morphological features reflect phylogenetic relatedness. These morphological features that also reflect relationships based on genomic data are shape of the valve, the raphe structure (presence or absence of the central nodule and direction of the central branches relative to each other in it), the number of striae and areolae in 10 µm. These morphological features were correlated with the clades in the ML (Maximum Likelihood) and BI (Bayesian inference) trees constructed from fragments of the 28S rDNA and rbcL genes.
Description of new species and emendations
Hantzschia abundans Lange-Bertalot emended by Maltsev et Kulikovskiy (Fig. 3)
Valves are dorsiventral with evidently concave central part of ventral side of the valve. Dorsal side is slightly convex, sometimes straight (Fig. 3a–l). Valve ends are slightly tapered and capitate (strains MZ–BH2, MZ–BH5) or more cuneate and capitate (MZ–BH1, MZ–BH6). Length 37.5–53.5 µm, breadth 6.0–7.5 µm. Fibulae are of different sizes, 6–9 in 10 µm. Two central fibulae are rather widely spaced. Striae are radiate, parallel at the valve ends, 16–20 in 10 µm. Areolae are not visible in LM. Fibulae are connected with 1–4 striae or interstriae.
In outside view central raphe ends are straight or slightly curved to the same side (Fig. 3m). In inside view central raphe ends are curved to dorsal side (Fig. 3n). Striae are uniseriate, 40–50 in 10 µm. Helictoglossae are small.
In the phylogenetic tree based on the 28S rDNA and rbcL genes, H. abundans strains form a separate clade (Fig. 2). In addition to our 5 strains, we also included two other strains of H. abundans, (Wes1)b and (Wes3)b, that were isolated from De Panne, Belgium (Souffreau et al.16). This clade also includes soil strains (Sterre6)e and (Sterre6)f, named by Souffreau et al.16 as “Hantzschia sp. 3”, isolated from Gent, Belgium.
Ecology and distribution
Hantzschia attractiva Maltsev et Kulikovskiy sp. nov. (Fig. 4)
Slide no. 02508/MZ–BH11 (Holotype represented by Fig. 4) in the collection of Maxim Kulikovskiy, К.A. Timiryazev Institute of Plant Physiology RAS, 10.05.2015, collected by Y. Maltsev.
Sod-medium podzolic soil, horizon 0–5 cm, plantation Betula pendula Roth, Yaroslavl region, Russia, N57°50′ 23.83″ E38°4′13.02″, 10.05.2015.
Length 66–70 µm, breadth 7.7–8.9 µm. Valves slightly asymmetrical to the apical axis, with dorsal margin concave or straight, ventral margin slightly concave. Apices protracted, rounded. Fibulae are different in size and placed irregularly, 5–7 in 10 µm. Central fibulae are more widely spaced than the others. Striae 17–18 in 10 µm. Areolae are not evident in LM.
Raphe with two branches, not continuous, internal proximal raphe ends curved in the dorsal direction. Fibulae of varying sizes, connected with 1–5 striae. Striae are uniseriate with 40–50 areolae in 10 µm. Internally, the areolae are rectangular in shape.
The epithet refers to the attractive nature of the shape of the valve.
In the phylogenetic tree based on the 28S rDNA and rbcL genes, the strain H. attractiva MZ–BH11 occupies an isolated position in the clade with three strains of Hantzschia sp. 2 (Mo1)a, (Mo1)e and (Mo1)m (Fig. 2), described by Souffreau et al.16 from Kangai-Nuruu (Mongolia). Clade H. attractiva plus H. pseudomongolica (Hantzschia sp. 2(Mo1)a, (Mo1)e and (Mo1)m) has high BI support and is sister to the clade of H. abundans (Fig. 2).
Ecology and distribution
The strain H. attractiva MZ–BH11 was isolated from the soil (sod-medium podzol) (Table 2).
Hantzschia pseudomongolica Maltsev et Kulikovskiy sp. nov. (Fig. 5)
Slide no. CSO77/(Mo1)a (holotype represented by Fig. 5a, d–g) in the collection of Universiteit Gent, collected by Pieter Vanormelingen.
Soil, Kangai-Nuruu, Mongolia. N47°50′20.0″ E99°59′59.9″.
Slide no. CSO78/(Mo1)e (paratype represented by Fig. 5b–c) in the collection of Universiteit Gent, collected by Pieter Vanormelingen. Slide no. CSO81/(Mo1)m in the collection of Universiteit Gent, collected by Pieter Vanormelingen.
Valves nearly straight, slightly asymmetrical to the apical axis and some specimens are also slightly asymmetrical to the transapical axis (Fig. 5d,g). Apices protracted, rounded to slightly capitate. Length 83.2–91.4 µm, breadth 7.8–9.4 µm. Fibulae are of different sizes, 6–8 in 10 µm. Two central fibulae are more widely spaced than the others. Striae 19–21 in 10 µm. Areolae are not discernible in LM.
Raphe not continuous. In inside view central raphe ends are straight (Fig. 5h). Areolae 40–45 in 10 µm.
In the phylogenetic tree based on the 28S rDNA and rbcL genes, H. pseudomongolica strains form a common clade with H. attractiva with high statistical support (LB 90; PP 100) (Fig. 2). In this case, the strains (Mo1)a and (Mo1)e form a separate subclade, slightly isolated from the clade with strain (Mo1)m.
The species is named according to the region where it was found and indicating superficial similarities with H. mongolica.
Hantzschia parva Maltsev et Kulikovskiy sp. nov. (Fig. 6)
Slide no. 02509/MZ–BH4 (Holotype here represented by Fig. 6a–g) in the collection of Maxim Kulikovskiy, К.A. Timiryazev Institute of Plant Physiology RAS, 19.04.2015, collected by Y. Maltsev.
Chernozem, horizon 0–5 cm, mixed deciduous stands, Poltava region, Ukraine, N49°8′31.69″ E34°13′1.51″, 19.04.2015.
Slide no. 02504/MZ–BH3 (Paratype here represented by Fig. 6h–n) in the collection of Maxim Kulikovskiy, К.A. Timiryazev Institute of Plant Physiology RAS, 1.03.2013, collected by Y. Maltsev.
Valves linear-lanceolate, asymmetrical about the apical axis, with dorsal margin more or less straight to slightly convex, ventral margin concave, with apices small, protracted, rounded to subrostrate. Length 37.0–42.5 µm, breadth 5–7 µm. Fibulae irregularly-placed along the ventral margin, 7–9 in 10 µm, with a distinct central nodule. Striae 17–20 in 10 µm; areolae not visible with LM.
Raphe not continuous, with internal proximal raphe ends deflected slightly in the same direction. Areolae 40–45 in 10 µm, rectangular in shape internally.
The epithet “parva” chosen according to size of the valve and compared with most species in the genus.
In the phylogenetic tree based on the 28S rDNA and rbcL genes, two strains of H. parva, MZ–BH3 and MZ–BH4, form a single clade (Fig. 2). With high bootstrap support, a sister clade joins this lineage, which includes two soil strains of H. cf. amphioxys (Sterre1)f and (Sterre1)h, isolated from the region of Gent, Belgium16. Compared to H. parva, these strains are characterized by somewhat larger valve sizes (35–49 µm long, 8–9 µm wide) and the number of striae is about 20–22 in 10 µm. It is possible that strains (Sterre1)f and (Sterre1)h represent another new species of Hantzschia, closely related to H. parva.
Ecology and distribution
In the course of this research, two H. parva soil strains were isolated from geographically distant biogeocenoses (Fig. 1, Table 2). The strain H. parva MZ–BH4 (holotype) was isolated from the soil in the broadleaf forest biogeocenosis. The strain H. parva MZ–BH3 (paratype) BH2 was isolated from the soil of the steppe biogeocenosis at the city cemetery. The dominant grass cover consisted of Elytrigia repens (L.) Desv. ex Nevski, Hordeum leporinum Link and other grasses.
Hantzschia stepposa Maltsev et Kulikovskiy sp. nov. (Fig. 7)
Slide no. 02516/MZ–BH12 (Holotype represented by Fig. 7) in the collection of Maxim Kulikovskiy, К.A. Timiryazev Institute of Plant Physiology RAS, 20.10.2014, collected by Y. Maltsev.
Forest litter, ordinary humus chernozem, plantation Quercus robur, Zaporizhzhia region, Ukraine, N47°30′23.46″ E34°23′15.99′, 10.20.2014.
Valves linear-lanceolate, straight to extremely weakly asymmetrical to the apical axis, apices protracted, knob-like to nearly capitate. Length 40.0–42.5 µm, breadth 6.0–6.5 µm. Fibulae irregular in size, 5–9 in 10 µm. Striae 22–25 in 10 µm.
Raphe not continuous externally and internally; central raphe endings are straight in outside view and curved in opposite directions in inside view. Areolae fine, 44–52 in 10 µm, rectangular in shape internally.
The species named according to the ecological region where it was found.
In the phylogenetic tree based on the 28S rDNA and rbcL genes, H. stepposa MZ–BH12 occupies a separate position (Fig. 2). H. stepposa is the sister taxon to the H. amphioxys clade, which emphasizes the close relation of the two species. The H. stepposa plus H. amphioxys clade is sister to the soil-dwelling Hantzschia belgica (Sterre3)a, characterized as a small cell species (length 36–37 μm and width 6.0–6.5 μm) with a number of striae close to H. stepposa (22–23 in 10 μm).
Ecology and distribution
The strain H. stepposa MZ–BH12 was isolated from the fermentation sub-horizon of the forest floor in the Quercus robur plantation with Celtis occidentalis L. in the second tier. The grass ground cover was represented by Stellaria holostea L., Anthriscus sylvestris (L.) Hoffm., Glechoma hederacea L. and Urtica dioica L.
Slide no. CSO86/(Sterre3)a (Holotype represented by Fig. 8) in the collection of Universiteit Gent.
Soil, Gent, Oost-Vlaanderen (East Flanders), Belgium. N51°01′38.6″ E3°42′58.4″, 21.11.2007, collected by Caroline Souffreau.
Valves linear-lanceolate, weakly asymmetrical to the apical axis, with small, protracted apices. Length 36–38 µm, breadth 6–7 µm. Fibulae variable in size and spacing along the ventral margin. Central fibulae more widely spaced than the others, 8–9 in 10 µm. Striae 22–23 in 10 µm.
Raphe not continuous and eccentric, placed on the valve mantle for the entire length. In inside view central raphe endings curved in opposite directions. Externally, areolae are rounded; internally they are rectangular in shape. Areolae fine, 50–55 in 10 µm.
The species named according to the region where it was found.
In the phylogenetic tree based on the 28S rDNA and rbcL genes, H. belgica (Sterre3)a occupies a separate position, sister to H. amphioxys plus H. stepposa clade (Fig. 2). These three taxa are closely related, with high statistical support (LB 100; PP 100) and represent a group of Hantzschia species, in which the central raphe ends on the inner side of the valve and are deflected in opposite directions.
Hantzschia amphioxys (Ehrenberg) Grunow emend. Maltsev et Kulikovskiy (Fig. 9)
Valves linear-lanceolate, with apices narrowly protracted, deflected dorsally. Fibular approximately of similar size and equally-spaced, with the two central fibulae more separate from one another as compared to others. Length 36–46 µm, breadth 4.8–6.5 µm. Fibulae 7–10 in 10 µm. Striae 21–24 in 10 µm.
Raphe not continuous. In outside view central raphe ends slightly curved to the same side (Fig. 9r). In inside view central raphe endings distinctly curved in opposite directions (Fig. 9s). Number of areolae are variable in different strains: from 40–50 in MZ–BH9 to 50–60 in MZ–BH14. Areolae range from 40 to 60 in 10 µm between the strains investigated.
In the phylogenetic tree, all the H. amphioxys strains isolated by us, as well as the sequences taken from BOLDSYSTEMS, form a separate clade (Fig. 2). This clade has several prominent subclades, formed with high statistical support. The first subclade (SCI) is represented by two strains of H. amphioxys (Sterre1)e and (Sterre3)c, isolated from soil in the Gent (Belgium) region16. The second subclade (SCII), which is sister to SCI, is formed by three strains, also isolated from Gent (Belgium), which are 2–5 µm shorter than the valves compared to the first group, one of our strains, MZ–BH8 and the epitype H. amphioxys D27_008. A separate monophyletic group within H. amphioxys has the other two subclades. The third subclade (SCIII) consists of three strains of H. amphioxys isolated from Schirmacher Oasis (Antarctica)16. The fourth subclade (SCIV) is represented by our three strains: MZ–BH9, MZ–BH14 and MZ–BH15 from widely separated habitats in Russia and Ukraine.
Ecology and distribution
The four H. amphioxys MZ–BH8, MZ–BH9, MZ–BH14 and MZ–BH15 strains we have identified belong to different, geographically distant, soil populations (Fig. 1, Table 2). Strain MZ–BH8 and MZ–BH9 were isolated from soil in mixed deciduous forests. Strain MZ–BH14 was isolated from the fermentation sub-horizon of forest litter in the Pinus pallasiana (D. Don) Holmboe planting. In the algae flora of this litter, H. amphioxys is one of the dominants36. Strain MZ–BH15 was isolated from the forest floor in the Pinus sylvestris L. plantation.
The H. abundans clade contains strains isolated in different regions of Belgium: (Sterre6)e and (Sterre6)f from Gent, (Wes1)b and (Wes3)b from De Panne16, as well as our strains from Zhytomyr, Kyiv and Kherson regions of Ukraine (Fig. 2). Clade H. attractiva plus H. pseudomongolica (“Hantzschia sp. 2” of Souffreau et al.16) represents rather remote populations: H. attractiva MZ–BH11 was isolated in the Yaroslavl region of Russia, and strains H. pseudomongolica (Mo1)a, (Mo1)e, (Mo1)m—in the mountain region of Kangai-Nuruu Mongolia. However, the presence of a stable phylogenetic connection between these populations undoubtedly underlines their close relationship. Also quite interesting is the relationship between the Canadian strains of Hantzschia sp. 1 (Ban1)b, (Ban1)e, (Ban1)f, (Ban1)h and Mongolian Hantzschia sp. 2 (Mo1)h, (Mo1)l. As for the clade of H. amphioxys, it represents the most distant populations from the Antarctic, Belgium, Germany, Russia and Ukraine. Moreover, the selected subclades do not always correspond to the region: the SCI subclade includes two Belgian strains (Sterre1)e and (Sterre3)c; SCII subclade is formed by three Belgian strains (Sterre4)a (Sterre4)b, (Sterre6)b, one Berlin strain D27_008 and strain MZ–BH8 from the Moscow Region (Russia); SCIII subclade consists of three Antarctic strains SCHIR S11, SCHIR S15, SCHIR S16; SCIV subclade is represented by our three strains: MZ–BH9 (Kursk region, Russia), MZ–BH14 and MZ–BH15 (Zaporizhia region, Ukraine). Due to the absence of distinct differences in morphology and ultrastructure between representatives of the subclade SCI–SCIV (Fig. 2) we don’t distinguish new species which may correspond to the separate monophyletic subclades within H. amphioxys.
Analysis of the distribution of the studied strains showed the presence of two trends in the biogeography of Hantzschia species. The first one shows that within the genus there are a number of widely distributed species; the second one shows that there are also species with a probably limited distribution (see also for Planothidium by Jahn et al.12). Neither H. abundans, nor H. amphioxys had strains that are more closely related to local endemics, and given the habitats confirmed in our study, they are species with wide distribution. Also, H. parva can be considered as widely distributed, two strains of which were isolated from habitats distant more than 400 km apart. The second trend may indicate the presence of species with a limited distribution: H. stepposa, H. abundans (Tor3)c, and two strains of H. cf. amphioxys (Sterre1)f, (Sterre1)h. However, the question of endemism of these species has to be rethought after revising the characteristics of the morphology and ultrastructure of phylogenetically close or new strains of Hantzschia. Our study has shown that samples of H. amphioxys strains can contain both H. amphioxys sensu stricto itself and a number of pseudocryptic taxa. When studying the biogeography of individual taxa, it is necessary to take into account the seasonal characteristics of their vegetation. We have shown, for example, that H. amphioxys as a dominant of all communities in the coniferous and white acacia litter in the spring, and in the summer—only in the white acacia. In the fall, H. amphioxys falls out of the dominant complex and may be absent in samples46.
Today, there is no single and universal morphological or ultrastructural feature that would characterize the genus Hantzschia and the most effective way to verify membership to this genus is with a molecular phylogeny47. Considering this, the data obtained here for 13 new soil strains of H. amphioxys and 6 related species not only significantly complement the previously obtained material16, but also represent a significant step in understanding the diversity and biogeography of cryptic and pseudocryptic taxa in the genus Hantzschia.
Materials and methods
Diatom samples of Hantzschia were collected in 2014–2015 from different soil and forest floor horizons in the territory of steppe, meadow and forest biogeocenoses of Eurasia (Fig. 1, Table 2). The forest floor samples were taken at a distance of 1.0–1.5 m from tree trunks in the areas without large branches and accumulated bark from the A01 (fresh debris), A02 (0–5 cm, decomposed debris with partially preserved initial structure of some components), and A03 (5–10 cm, strongly decomposed debris) sub-horizons. In total, we studied 20 soil samples, and from these 13 strains of Hantzschia amphioxys sensu lato were isolated. The isolated strains were deposited in the culture collection of Molecular systematics of aquatic plants laboratory at К.A. Timiryazev Institute of Plant Physiology RAS. The cultivation of the strains was done as follows: a subsample of each collection was added to a WC liquid medium48. Monoclonal strains were established by micropipetting single cells under the inverted microscope Zeiss Axio Vert. A1. Nonaxenic monocultures of the algae were cultivated in the liquid WC medium in Petri dishes with alternating 12-h light and dark photoperiod with 70 μmol photons m−2 s−1 light intensity. Strains were analyzed after one month of culturing.
Parts of the original strains by Souffreau et al.16 such as Hantzschia sp. 1 (Ban1)e and (Ban1)f, Hantzschia sp. 2 (Mo1)a, (Mo1)e and (Mo1)m, Hantzschia sp. 3 (Sterre6)f, H. amphioxys SCHIR_S11, SCHIR_S16, (Sterre1)e, (Sterre3)c and (Sterre4)b, H. cf. amphioxys (Sterre3)a were provided by Ghent University (Belgium) and used for morphological studies with taxonomic revisions.
Samples and strains for light microscopy and scanning electron microscopy investigations were processed by means of a standard procedure involving treatment with 10% HCl and concentrated H2O2. The material was washed with distilled water. Permanent diatom preparations were mounted in Naphrax. LM observations of the natural population and monocultures were performed using a Zeiss Axio Scope A1 microscope (Germany) equipped with oil immersion objective (× 100/n.a 1.4, DIC). The ultrastructure of the valve was examined with the JSM-6510LV (Japan) scanning electron microscope49. Cell measurements were based on at least 50 individuals and expressed as minimum and maximum values in the taxonomic description.
The sample selected and designated as lectotype was from the Labrador Peninsula (sample Nr. 1780) stored in the Ehrenberg collection, Museum für Naturkunde, Leibniz-Institut für Biodiversitäts- und Evolutionsforschung an der Humboldt Universität zu Berlin (BHUPM) with the mica-reference number 250502b blue. Additionally, in the Algae Collection, Botanischer Garten und Botanisches Museum Berlin-Dahlem, Freie Universität Berlin (B) an isolectotype (B 40 0040891) was selected, and the strain D27_008 was designated as epitype with its V4 domain of 18S rDNA already published20; rbcL and 28S rDNA sequences of Hantzschia amphioxys strain D27_008 have been submitted to NCBI in this study (for methods of extraction see Abarca et al.50).
Total DNA of monoclonal cultures was extracted using InstaGene Matrix according to the manufacturer’s protocol. Fragments of 18S rDNA (380 bp, including V4 domain), partial 28S rDNA gene including the D1-D3 region (753 bp) and partial rbcL plastid gene (1032 bp) were amplified using primers from Zimmerman et al.51 for 18S rDNA fragments, from Jo et al.52 for 28S rDNA fragments and from Ruck and Theriot42 for rbcL fragments. The rbcL and 28S rDNA sequences were used for phylogeny reconstruction. V4 domains were used for the step–by–step comparison of the 18S rDNA sequences of our strains and other Hantzschia strains.
Amplifications of the 18S rDNA fragments, partial 28S rDNA and rbcL genes fragments were carried out using the premade mix ScreenMix (Evrogen, Russia) for the polymerase chain reaction (PCR). The conditions of amplification for 18S rDNA fragments were: an initial denaturation of 5 min at 95 °C, followed by 35 cycles at 94 °C for denaturation (30 s), 52 °C for annealing (30 s) and 72 °C for extension (50 s), and a final extension of 10 min at 72 °C49. The conditions of amplification for partial 28S rDNA were: an initial denaturation of 5 min at 95 °C, followed by 45 cycles at 94 °C for denaturation (30 s), 62 °C for annealing (30 s) and 72 °C for extension (80 s), and a final extension of 10 min at 72 °C. The conditions of amplification for partial rbcL were: an initial denaturation of 5 min at 95 °C, followed by 45 cycles at 94 °C for denaturation (30 s), 60 °C for annealing (30 s) and 72 °C for extension (80 s), and a final extension of 10 min at 72 °C49.
The resulting amplicons were visualized by horizontal agarose gel electrophoresis (1.5%), colored with SYBR Safe (Life Technologies, United States). Purification of PCR products was carried out with a mixture of FastAP, 10 × FastAP Buffer, Exonuclease I (Thermo Fisher Scientific, USA) and water. 18S rDNA fragments and partial 28S rDNA and rbcL genes were decoded from two sides using forward and reverse PCR primers and the Big Dye system (Applied Biosystems, USA), followed by electrophoresis using a Genetic Analyzer 3500 sequencer (Applied Biosystems, USA)49.
Editing and assembling of the consensus sequences were carried out by comparing the direct and reverse chromatograms using the Ridom TraceEdit program (ver. 1.1.0) and Mega753. Newly determined sequences and DNA fragments from 27 other Hantzschia species, which were downloaded from GenBank and BOLD (taxa, strain numbers and Accession Numbers are given in Supplementary Table S3), were included in the alignments.
The nucleotide sequences of the 28S rDNA and rbcL genes were aligned separately using the Mafft v7 software and the E-INS-i model54. For the protein-coding sequences of the rbcL gene, we checked that the beginning of the aligned matrix corresponded to the first position of the codon (triplet). The resulting alignments had lengths of 752 (28S rDNA) and 1033 (rbcL) characters and can be found in the Supplementary Alignment S4.
The data set was analyzed using Bayesian inference method with posterior probability implemented in Beast ver. 184.108.40.206 to construct phylogeny. For each of the alignment partitions, the most appropriate substitution model was estimated using the Bayesian information criterion (BIC) as implemented in jModelTest 2.1.1056. This BIC-based model selection procedure selected the following models, shape parameter α and a proportion of invariable sites (pinvar): TrNef + I and pinvar = 0.8330 for 28S rDNA; F81 + I and pinvar = 0.9030 for the first codon position of the rbcL gene; JC for the second codon position of the rbcL gene; TPM1uf + G and α = 0.8100 for the third codon position of the rbcL gene. We used the HKY model of nucleotide substitution instead of TrNef, F81, JC and TPM1uf given that they were the best matching model available for Bayesian inference method. A Yule process tree prior was used as a speciation model. The analysis ran for 10 million generations with chain sampling every 1000 generations. The parameters-estimated convergence, effective sample size (ESS) and burn-in period were checked using the software Tracer ver. 220.127.116.11. The initial 25% of the trees were removed, the rest retained to reconstruct a final phylogeny. The phylogenetic tree and posterior probabilities of its branching were obtained on the basis of the remaining trees, having stable estimates of the parameter models of nucleotide substitutions and likelihood. ML analysis was performed using the program RAxML57. The nonparametric LB analysis with 1000 replicas was used. As there are no outgroup taxa included in our analysis, we chose an unrooted tree design. The statistical support values were visualized in FigTree ver. 1.4.4 and Adobe Photoshop CC (19.0).
Round, F. E., Crawford, R. M. & Mann, D. G. Diatoms: Biology and Morphology of the Genera (Cambridge University Press, Cambridge, 1990).
Fontaneto, D. Biogeography of Microscopic Organisms (Cambridge University Press, Cambridge, 2011).
Kociolek, J. P. & Spaulding, S. A. Freshwater diatom biogeography. Nova Hedwigia 71, 223–241 (2001).
Kulikovskiy, M. S., Lange-Bertalot, H., Metzeltin, D. & Witkowski, A. Lake Baikal: hotspot of endemic diatoms I (Iconographia Diatomologica (Koeltz Scientific Books, Oberreifenberg, 2012).
Abarca, N., Jahn, R., Zimmermann, J. & Enke, N. Does the cosmopolitan diatom Gomphonema parvulum (Kützing) Kützing have a biogeography?. PLoS ONE 9, e86885. https://doi.org/10.1371/journal.pone.0086885 (2014).
Finlay, B. J., Monaghan, E. B. & Maberly, S. C. Hypothesis: the rate and scale of dispersal of freshwater diatom species is a function of their global abundance. Protist 153, 261–273. https://doi.org/10.1078/1434-4610-00103 (2002).
Finlay, B. J. & Fenchel, T. Cosmopolitan metapopulations of free-living microbial eukaryotes. Protist 155, 237–244. https://doi.org/10.1078/143446104774199619 (2004).
Pinseel, E. et al. Global radiation in a rare biosphere soil diatom. Nat. Commun. 11, 2382. https://doi.org/10.1038/s41467-020-16181-0 (2020).
Poulíčková, A., Spackova, J., Kelly, M. G., Duchoslav, M. & Mann, D. G. Ecological variation within Sellaphora species complex (Bacillariophyceae): specialists or generalists?. Hydrobiologia 614, 373–386. https://doi.org/10.1007/s10750-008-9521-y (2008).
Beszteri, B., John, U. & Medlin, L. An assessment of cryptic genetic diversity within the Cyclotella meneghiniana species complex (Bacillariophyta) based on nuclear and plastid genes, and amplified fragment length polymorphisms. Eur. J. Phycol. 42, 47–60. https://doi.org/10.1080/09670260601044068 (2007).
Li, Y., Williams, D. M., Metzeltin, D., Kociolek, J. P. & Gong, Z. Tibetiella pulchra gen. nov. et sp. Nov., a new freshwater epilithic diatom (Bacillariophyta) from River Nijiang in Tibet, China. J. Phycol. 46, 325–330. https://doi.org/10.1111/j.1529-8817.2009.00776.x (2010).
Jahn, R. et al. Planothidium lanceolatum and Planothidium frequentissimumreinvestigated with molecular methods and morphology: four new species and the taxonomic importance of the sinus and cavum. Diatom Res. 32, 75–107. https://doi.org/10.1080/0269249X.2017.1312548 (2017).
Chao, A., Li, P. C., Agatha, S. & Foissner, W. A statistical approach to estimate soil ciliate diversity and distribution based on data from five continents. Oikos 114, 479–493. https://doi.org/10.1111/j.2006.0030-1299.14814.x (2006).
Foissner, W. Biogeography and dispersal of micro-organisms: a review emphasizing protists. Acta Protozool. 45, 111–136 (2006).
Gollerbach, M. M. & Shtina, E. A. Soil Algae (Nauka, Leningrad, 1969).
Souffreau, C. et al. Molecular evidence for distinct antarctic lineages in the cosmopolitan terrestrial diatoms Pinnularia borealis and Hantzschia amphioxys. Protist 164, 101–115. https://doi.org/10.1016/j.protis.2012.04.001 (2013).
Maltsev, Y. & Kulikovskiy, M. Molecular and morphological investigation of cosmopolitan diatom Hantzschia amphioxys with remarks on biogeography. Phycologia 56, 125 (2017).
You, Q., Kociolek, J. P. & Wang, Q. The diatom genus Hantzschia (Bacillariophyta) in Xinjiang Province, China. Phytotaxa 197, 1–14. https://doi.org/10.11646/phytotaxa.197.1.1 (2015).
Zidarova, R., Van De Vijver, B., Quesada, A. & De Haan, M. Revision of the genus Hantzschia (Bacillariophyceae) on Livingston Island (South Shetland Islands, Southern Atlantic Ocean). Pl. Ecol. Evol. 143, 318–333. https://doi.org/10.5091/plecevo.2010.402 (2010).
Jahn, R., Kusber, W.-H. & Lange-Bertalot, H. Typification and taxonomy of Hantzschia amphioxys (Ehrenberg) Grunow (Bacillariophyta): type of the genus name Hantzschia Grunow. Nova Hedwigia Beih. 143, 103–110. https://doi.org/10.1127/1438-9134/2014/005 (2014).
Ehrenberg, C. G. Verbreitung und Einfluss des mikroskopischen Lebens in Süd- und Nord-Amerika. Abh. Königl. Akad. Wiss., 291–445 (1843).
Grunow, A. New diatoms from Honduras, with notes by F. Kitton. Monthly Microscopical J. 18, 165–186 (1877).
Boyer, C. S. Synopsis of the North American Diatomaceae. Proc. Acad. Nat. Sci. Philadelphia 79, 227–583 (1927).
Topachevsky, O. V. & Oksyuk, O. P. Diatom algae - Bacillariophyta (Diatomuae). Identifier of Freshwater Algae of the Ukrainian SSR, vol 11 (USSR Academy of Sciences, Kyiv, 1960).
Krammer, K. & Lange-Bertalot, H. Bacillariophyceae. 2. Teil: Bacillariaceae, Epithemiaceae, Surirellaceae. Süßwasserflora von Mitteleeuropa. Band 2/2 (Gustav Fisher Verlag, Jena, 1988).
Lund, J. W. Observations on soil algae. New Phytol. 44, 196. https://doi.org/10.1111/j.1469-8137.1945.tb05033.x (1945).
Aleksakhina, T. I. & Shtina, E. A. Soil Algae of Forest Biogeocenoses (Nauka, Moscow, 1984).
Lange-Bertalot, H. 85 neue Taxa und über 100 weitere neu definierte Taxa ergänzend zur Süßwasserflora von Mitteleuropa. Vol 2/1–4. Biblioth. Diatomol. 27, 1–454 (1993).
Johansen, J. R. Impacts of fire on biological soil crusts. In Biological Soil Crusts: Structure, Function, and Management. Ecological Studies (Analysis and Synthesis) (eds. Belnap, J. & Lange, O. L.) vol. 150 (Springer, Berlin, 2001).
Kostikov, I. Y. et al. Soil Algae of Ukraine: History and Methods of Research, System, Synopsis of Flora (Kyiv, 2001).
Rosentreter, R. & Belnap, J. Biological Soil Crusts of North America in Biological Soil Crusts: Structure, Function, and Management. Ecological Studies (Analysis and Synthesis) (eds. Belnap, J. & Lange, O. L.) vol. 150 (Springer, Berlin, 2001).
Tsarenko, P. M., Wasser, S. & Nevo, E. Algae of Ukraine: Diversity, Nomenclature, Taxonomy, Ecology and Geography Vol. 2 (Bacillariophyta (ARG Gantner Verlag K-G, Ruggell, 2009).
Maltseva, I. A. Soil Algae of the Forests of Steppe Area of Ukraine (Lux, Melitopol, 2009).
Lin, C.-S., Chou, T.-L. & Wu, J.-T. Biodiversity of soil algae in the farmlands of mid-Taiwan. Bot. Stud. 54, 41. https://doi.org/10.1186/1999-3110-54-41 (2013).
Maltsev, Y. & Maltseva, I. The influence of forest-forming tree species on diversity and spatial distribution of algae in forest litter. Folia Oecologica 45, 12–21. https://doi.org/10.2478/foecol-2018-0008 (2018).
Maltsev, Y. I., Pakhomov, A. Y. & Maltseva, I. A. Specific features of algal communities in forest litter of forest biogeocenoses of the Steppe zone. Contemp. Probl. Ecol. 10, 71–76. https://doi.org/10.1134/S1995425517010085 (2017).
Maltsev, Y. I., Maltseva, I. A., Solonenko, A. N. & Bren, A. G. Use of soil biota in the assessment of the ecological potential of urban soils. Biosyst. Divers. 25, 257–262. https://doi.org/10.15421/011739 (2017).
Maltseva, I. A. & Maltsev, Y. I. Diversity of cyanobacteria and algae in dependence to forest-forming tree species and properties rocks of dump. Int. J. Environ. Sci. Technol. https://doi.org/10.1007/s13762-020-02868-w (2020).
Scherbina, V. V., Maltseva, I. A. & Solonenko, A. N. Peculiarities of postpyrogene development of algae in steppe biocenoses at Askania Nova Biospheric national park. Contemp. Probl. Ecol. 7, 187–191. https://doi.org/10.1134/S1995425514020140 (2014).
Lange-Bertalot, H., Cavacini, P., Tagliaventi, N. & Alfinito, S. Diatoms of Sardinia. Rare and 76 New Species in Rock Pools and Other Ephemeral Waters. Iconographia Diatomologica (ARG Gantner Verlag KG, Königstein, 2003).
Werum, M. & Lange-Bertalot, H. Diatoms in Springs from Central Europe and Elsewhere Under the Influence of Hydrogeology and Anthropogenic Impacts. Iconographia Diatomologica (ARG Gantner Verlag K-G, Königstein, 2004).
Ruck, E. C. & Theriot, E. C. Origin and evolution of the canal raphe system in diatoms. Protist 162, 723–737. https://doi.org/10.1016/j.protis.2011.02.003 (2011).
Metzeltin, D., Lange-Bertalot, H. & García-Rodríguez, F. Diatoms of Uruguay, Compared with Other Taxa from South America and Elsewhere. Iconographia Diatomologica (ARG Gantner Verlag KG, 2005).
Metzeltin, D., Lange-Bertalot, H. & Soninkhishig, N. Diatoms in Mongolia. Iconographia Diatomologica (ARG Gantner Verlag KG, 2009).
Li, C.-W. & Volcani, B. E. Four new apochlorotic diatoms. Br. Phycol. J. 22, 375–382 (1987).
Maltsev, Y. I., Didovich, S. V. & Maltseva, I. A. Seasonal changes in the communities of microorganisms and algae in the litters of tree plantations in the Steppe zone. Eurasian Soil. Sci. 50, 935–942. https://doi.org/10.1134/S1064229317060059 (2017).
Carballeira, R. et al. A combined morphological and molecular approach to Nitzschia varelae sp. Nov., with discussion of symmetry in Bacillariaceae. Eur. J. Phycol. 52, 342–359. https://doi.org/10.1080/09670262.2017.1309575 (2017).
Guillard, R. R. L. & Lorenzen, C. J. Yellow-green algae with chlorophyllide c. J. Phycol. 8, 10–14 (1972).
Kulikovskiy, M. et al. Morphological and molecular investigation of Gomphonema longissimum and related taxa from Malili lakes (Indonesia) with comments on diatom evolution in ancient lakes. Eur. J. Phycol. 55, 147–161. https://doi.org/10.1080/09670262.2019.1664771 (2020).
Abarca, N. et al. Defining the core group of the genus Gomphonema Ehrenberg with molecular and morphological methods. Bot. Lett. 167, 114–159. https://doi.org/10.1080/23818107.2019.1694980 (2020).
Zimmermann, J., Jahn, R. & Gemeinholzer, B. Barcoding diatoms: evaluation of the V4 subregion on the 18S rRNA gene, including new primers and protocols. Org. Divers. Evol. 11, 173–192. https://doi.org/10.1007/s13127-011-0050-6 (2011).
Jo, B. Y., Shin, W. & Boo, S. M. Studies on ultrastructure and three-gene phylogeny of the genus Mallomonas (Synurophyceae). J. Phycol. 47, 415–425. https://doi.org/10.1111/j.1529-8817.2010.00953.x (2011).
Kumar, S., Stecher, G. & Tamura, K. MEGA7: molecular evolutionary genetics analysis version 7.0 for bigger datasets. Mol. Biol. Evol. 33, 1870–1874. https://doi.org/10.1093/molbev/msw054 (2016).
Katoh, K. & Toh, H. Parallelization of the MAFFT multiple sequence alignment program. Bioinformatics 26, 1899–1900. https://doi.org/10.1093/bioinformatics/btq224 (2010).
Drummond, A. J. & Rambaut, A. BEAST: Bayesian evolutionary analysis by sampling trees. BMC Evol. Biol. 7, 214. https://doi.org/10.1186/1471-2148-7-214 (2007).
Darriba, D., Taboada, G. L., Doallo, R. & Posada, D. jModelTest 2: more models, new heuristics and parallel computing. Nat. Methods 9, 772. https://doi.org/10.1038/nmeth.2109 (2012).
Stamatakis, A., Hoover, P. & Rougemont, J. A rapid bootstrap algorithm for the RAxML web-servers. System. Biol. 75, 758–771. https://doi.org/10.1080/10635150802429642 (2008).
Purification and culturing, performing the DNA extraction and PCR reactions, depositing of the investigated Hantzschia strains were carried out with financial support by Russian Science Foundation (project number 20-74-10076) and by framework of the state assignment (theme AAAA–A19–119041190086–6) for finishing the manuscript. The authors would like to thank Dr. Koen Sabbe for the comments and improving the paper. We thank Dr. Caroline Souffreau and Dr. Eveline Pinseel for providing samples from Souffreau et al. .
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Table S1 Percent similarity (p-distance) matrix of 40 Hantzschia strains on the basis of the partial 28S rRNA gene (752 bp).
Supplementary Table S2 Percent similarity (p-distance) matrix of 40 Hantzschia strains on the basis of the partial ribulose-1,5-bisphosphate carboxylase, large subunit (344 amino acids).
Supplementary Table S3 Taxa and DNA sequence data used in phylogenetic analysis.
Supplementary alignment 1 Alignment file of 40 partial rbcL and partial 18S rDNA sequences of 1785 characters, in txt format.
About this article
Cite this article
Maltsev, Y., Maltseva, S., Kociolek, J.P. et al. Biogeography of the cosmopolitan terrestrial diatom Hantzschia amphioxys sensu lato based on molecular and morphological data. Sci Rep 11, 4266 (2021). https://doi.org/10.1038/s41598-021-82092-9
Microbial Ecology (2021)