Correction to: Scientific Reports https://doi.org/10.1038/s41598-021-93365-8, published online 09 July 2021
The original version of this Article contained errors in Figure 8(a) and (b) where the AFM and SEM images were incorrectly constructed showing the electrode on glass, rather than the electrode deposited on PET substrate.
The original Figure 8 and accompanying legend appear below.
Schematic illustration of the formation of the interpenetrating networks by mixing PEDOT-PSS with VOx(acac). AFM (a), SEM (b) and TEM (c) images of the PEDOT-PSS:VOx (1:3) printed film.
The original Article has been corrected.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Wageh, S., Raïssi, M., Berthelot, T. et al. Author Correction: Digital printing of a novel electrode for stable flexible organic solar cells with a power conversion efficiency of 8.5%. Sci Rep 11, 24515 (2021). https://doi.org/10.1038/s41598-021-04283-8
Published:
DOI: https://doi.org/10.1038/s41598-021-04283-8
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
