Pitting of malaria parasites in microfluidic devices mimicking spleen interendothelial slits

The spleen is a hematopoietic organ that participates in cellular and humoral immunity. It also serves as a quality control mechanism for removing senescent and/or poorly deformable red blood cells (RBCs) from circulation. Pitting is a specialized process by which the spleen extracts particles, including malaria parasites, from within circulating RBCs during their passage through the interendothelial slits (IES) in the splenic cords. To study this physiological function in vitro, we have developed two microfluidic devices modeling the IES, according to the hypothesis that at a certain range of mechanical stress on the RBC, regulated through both slit size and blood flow, would force it undergo the pitting process without affecting the cell integrity. To prove its functionality in replicating pitting of malaria parasites, we have performed a characterization of P. falciparum-infected RBCs (P.f.-RBCs) after their passage through the devices, determining hemolysis and the proportion of once-infected RBCs (O-iRBCs), defined by the presence of a parasite antigen and absence of DAPI staining of parasite DNA using a flow cytometry-based approach. The passage of P.f.-RBCs through the devices at the physiological flow rate did not affect cell integrity and resulted in an increase of the frequency of O-iRBCs. Both microfluidic device models were capable to replicate the pitting of P.f.-RBCs ex vivo by means of mechanical constraints without cellular involvement, shedding new insights on the role of the spleen in the pathophysiology of malaria.

The spleen is a secondary lymphoid organ that performs critical physiological functions ranging from induction of adaptive cellular and humoral immune response, iron recycling, removal from circulation of senescent red blood cells (RBCs), bacteria, and other pathogens, including malaria parasites 1 . The capacity to fulfill its blood filtering function is given to the exquisite tissue compartmentalization and its unique circulatory system.
The human spleen is organized in two functional compartments known as white pulp and red pulp separated by a marginal zone. The white pulp is composed by T cells lining around arterioles surrounded by a B cells zone forming follicles. The red pulp represents the large majority of the spleen tissue and is formed by reticular cells, and immune cells which function in monitoring aged, dead or opsonized RBCs and in the surveillance of pathogens 1 . Importantly, the red pulp contains circulation open spaces lacking endothelial lining called splenic cords, which are populated by reticular fibers and reticular cells forming a complex mesh. Blood is delivered from terminal arterioles into the splenic cords, where highly active macrophages survey circulating cells and particles to remove aged, infected or dysfunctional RBCs. Before exiting this compartment, in sinusoidal spleens such as that of humans, RBCs pass through interendothelial slits (IES), 1-2 micron structures of the venous sinuses, before reentering into circulation.
During this stringent quality control process of senescent and/or poorly deformable RBCs, the spleen also removes particles from within circulating red cells such as nuclear remnants (Howell-Jolly bodies), insoluble Scientific Reports | (2021) 11:22099 | https://doi.org/10.1038/s41598-021-01568-w www.nature.com/scientificreports/ globin precipitates (Heinz bodies), normally-occurring endocytic vacuoles 2 and malaria parasites 3 . This phenomenon, known as pitting, describes the squeeze passage of erythrocytes containing inclusion bodies through the narrow IES of the venous sinus wall, removing them and leaving a fraction of the cell containing the nondeformable inclusion bodies trailing behind the reticular meshwork side. Therefore, pitting refers to a corrective mechanism rather than the removal of defective RBCs through phagocytosis which is sometimes referred as the culling function of the spleen 2 . For ethical and technical reasons, functional studies of the spleen have been limited to animal models 1 . The development and validation of lab-on-a-chip microfluidic devices to accelerate physiological and drug discovery and to reduce animal experimentation 4,5 , offers a robust alternative to study the function of the spleen. Two different microfluidic devices emulating the fast-flow and slow-flow compartments as well as IES of the spleen have been previously constructed and showed to retain parasitized, aged or defective red blood cells from hereditary spherocytosis 6,7 . Neither studies, however, reported observations on pitting casting doubts on whether this phenomenon is only due to the mechanical forces in the squeezing of infected-RBC through the slits.
In this study, we have designed and constructed two microfluidic devices with the objective of replicating the mechanical pitting functions of the spleen, which remove malaria parasites from infected RBCs, using a flow cytometry approach and imaging to evidence this process. We demonstrated that the microfluidic devices replicate ex vivo the pitting of P.f.-RBCs of the spleen by means of mechanical forces exclusively, leaving a population of once infected red blood cells, free from the parasite without causing cell rupture.

Methods
Sample preparation. Uninfected red blood cells (uRBCs) were obtained from donors at the Blood and Tissue Bank (Barcelona), with a written informed consent and in accordance with the Ethics Committee protocols of the Blood and Tissue Bank. Upon receipt, RBCs were washed twice with incomplete RPMI and resuspended to 50% hematocrit in the same medium. P. falciparum-infected RBCs (P.f.-RBCs) were obtained by culturing P. falciparum 3D7 parasites with human erythrocytes at 3% hematocrit in RPMI medium (Gibco 041-91762A) supplemented with L-Glutamine 200 mM (Invitrogen 25030-024). In all experiments, parasites obtained from in vitro cultures were concentrated using a 70% percoll gradient, followed by a 5% sorbitol treatment to differentially induce osmotic lysis of trophozoites and schizonts in order to achieve > 80% synchronous ring-stages 8 . Right before the experiment, RBCs were washed twice with incomplete RPMI and resuspended to 10% hematocrit in the same medium. Infections were characterized by optical microscopy of thin blood smears stained with Giemsa 8 (see Supplementary Fig. S1). The experiments were conducted according to the guidelines of the Declaration of Helsinki and approved by the University of Barcelona Bioethics Commission (CBUB) (Project 160016 and date of approval March 1st 2016).
Microfluidics, device design and fabrication. Two different models based on the principle of increasing the numbers of IES to achieve statistical significance of the passage of RBC through these slits as reported by Buffet and collaborators 7 were designed and constructed (Fig. 1A). In both models, the grid of columns and slits were set on a rectangular microchannel of 1 mm width and 8 mm length. The slits width decreased uniformly along the microchannel from 100 µm to 2 µm. The difference between both designs is the dimension of their columns. Model 1 is composed of fix columns with dimensions of 50 µm × 50 µm and variations on the slit size from 50 to 2 µm, with a total of 120 slits. The large dimensions of the columns allow for the increase of time that cells need to pass through the slit, submitting the infected cell to a longer exposure to the deformability stress for pitting to take place. Model 2 is composed of different columns dimensions decreasing from 100 µm × 100 µm to 10 µm × 10 µm and slits width that decrease from 100 to 2 µm. This small column size has the advantage of increasing the number of constrictions per chip, 498 in total, therefore its performance relays on the high frequency of pitting. The design of the microchannels was developed using Draftsight Software 2017 (Dassaults Systèmes). The designs were printed, with high resolution, on a 10 cm diameter chrome glass mask. The microchannel fabrication was performed at the Physics Faculty of the University of Barcelona, using photolithography and replica molding techniques 9,10 (Fig. 2). The masters were manufactured spin coating SU-8 negative photoresist (from Microchem) over a silicon substrate. We used 2 different photoresists SU-8 2010, to reach a microchannel depth of b = 7 µm, and SU-8 3005 to reach a microchannel depth of b = 4 µm. Silicon wafers were used instead of regular glass substrates, to ensure good adhesion of the photoresist. After the wafer was thoroughly covered with the photoresist, both mask and wafer were mounted on a lithography aligner. A controlled UV light source was activated, causing the polymerization process of the negative photoresist to take place. Being SU-8 a negative photoresist, the paths covered by the mask, which are not impacted by the UV light, were washed away in the development step. Once curing and baking recommended times were finished, the wafer was washed using the SU-8 developer. Finally, the entire uncured polymer was stripped away, leaving only the designs printed by the mask (see Supplementary Fig. S2A). A silanization process was carried out over the silicon surface after the photolithography process, in order to create a monolayer which protects the surface, prevents SU-8 structures from detaching and allows using the master several times without breaking the structures. The obtained wafers were covered with PDMS and set to solidify at 65 °C for 2 h. Once the PDMS was cured, it was carefully peeled off the wafer. Six sets of channels (three of each design) were cut using a sharp blade. The inlet and outlet for tubing were made using a punch with a diameter of 0.75 mm 2 . Newly cut and pierced PDMS channels were cleaned using water and ethanol to remove any grease or dust particles attached during handling. Next, they were rinsed using isopropanol and deionized water. Subsequently channels were blown dry using compressed nitrogen (see Supplementary Fig. S2B). Lastly, PDMS channels were bonded to clean glass substrates, using oxygen plasma, obtaining the microdevices (see Supplementary Fig. S2C).  (Fig. 3A,B). A constant flow of 5 μl/min was established in the microfluidic device. In all cases, blood passed just once through the devices. The experiments were carried out at RT (room temperature). An Optikam camera connected to an inverted microscope was used to record images (Fig. 3B).

Hemolysis analysis.
Hemolysis was quantified as a function of hemoglobin release in the medium supernatant after centrifugation of non-infected and P.f.-RBCs at 1000×g as previously reported 11 . For that, four conditions were tested for both infected and non-infected blood: (1) Fresh blood (negative control).
(2) Blood passing through the devices at the physiological flow rate (5 μl/min). (3) Blood passing at 40 times the physi-   Epifluorescence microscopy. Following the same staining protocol described above, RBCs were imaged in an epifluorescence microscope (Leica AF6000) before and after passing through the microfluidic devices.
Image acquisition. Several movies 10 s-long of infected blood circulating through the slits were obtained using a laser scanning confocal microscope (TCS-SP5; Leica Microsystems) at a magnification of 25.0 × (water objective). Videos were analyzed using the ImageJ software (version 1.41n, Wayne Rasband, NIH).
Statistical analysis. Data were analyzed using Microsoft Excel and GraphPrism statistics program. Hemolysis analysis were quantified using a Kruskal-Wallis test, considering statistical significance p value < 0.05. Flow cytometry pitting analysis were quantified using a T test with Wilcoxon signed-rank post-test, considering statistical significance a p value < 0.05.

Results
Microfluidic devices. We designed two microfluidic device models containing a set of pillars positioned at particular distance to replicate the minimum IES size that would force P.f.-RBCs to pass through the slits without collapsing, thus, simulating the pitting function of spleen (Fig. 1A). This could be achieved considering the cross-section of the slit to be smaller than the RBC surface. To avoid rotation of the cell, the height of the microchannels should not exceed the diameter of the cells. Hence, considering the average size of the red blood cells (7.8 µm diameter and 2 µm height), we defined two heights for the microchannels. The minimum slit cross-sections were approximately 5.75 and 3.41 times smaller than the area of the cell (Fig. 1B). The microfluidics devices were composed of microchannels with a filtration mesh structure, containing vertical square columns and slits that decrease in size along the microchannel and in the direction of the flow. The columns aim to obstruct the flow of the cells in order to decrease the number of RBCs, and observe them at the minimum slit zone at a smaller concentration. The minimum slit-wide zone of the design is where the microchannel slits will emulate the IES of the spleen, responsible for its filtration function. The relationship between the path geometry and the flow from the system explains how the forces interacting in the fluid flow allow the pitting phenomenon to take place. The pressure drop P , inside the system can be expressed as the product of the fluid flow Q, and the resistance R posed by the microfluidic channel: where the flow rate Q is defined as the product between the mean velocity of the fluid and the area of the crosssection of the channel, Q = vA . The area A = ωb, is a rectangular cross-section of width ( ω) and height (b). The resistance R is: where L is the lenth of the slit and η is the viscosity of the fluid. Taking into account the equations stated above and knowing that the experimental set-up uses constant flow, a characteristic time is necessary to achieve pitting. This time depends on the velocity v . At the same time, it is dependent on the length L, expressed in its relationship to parameter R . Choosing adequate dimensions for the microchannel, the selected length of the slits should be extensive enough to allow pitting to happen while avoiding hemolysis.

Hemolysis.
Hemolysis experiments were conducted to exclude the possibility that the flux through the microchannels caused the rupture of RBCs during its transit through the slits. For that, spectrophotometric quantification of released hemoglobin in the cells medium was performed 11 . Visual inspection (Fig. 4A) and statistical analysis of hemolysis quantification by spectrophotometry (Fig. 4B) showed that non-infected and P.f.-RBCs after passing through both device models were intact as a significant difference in the hemoglobin release was found when compared with saponin-treated RBCs, used as a positive control of hemolysis. Importantly, we did not detect hemolysis of RBCs passing throughout the devices at physiological flow rate (5 µl/min), neither at 40 times the physiological flow rate. These data indicate that RBCs remain intact after passing through the slits of both microfluidic devices designed.  (Fig. 5). Next, we performed a pitting quantification analysis by flow cytometry using a gating strategy to define uRBCs (DAPI -RESA -), P.f.-RBCs (DAPI + RESA + ) and O-iRBCs (DAPI -RESA + ) (see Supplementary Fig. S3A). Importantly, we observed that in all samples, and more prominently those that passed through the devices, independent of its infection status, a population of DAPI -RESA medium was detected, accounting for approximately 0.5% of total cells. Based on the high fluorescence intensity of RESA marker that we observed in P.f.-RBCs population after passing through the device, which clearly differentiated from this DAPI -RESA medium observed in uRBCs, we redefined the truly O-iRBCs population as DAPI -RESA high , therefore excluding this background population from the pitting analysis. Using this gating strategy, we quantified the basal frequencies of all above-mentioned populations in infected cultures from seven independent experiments before passing through the devices. Results showed a great reproducibility in the proportion of all populations (see Supplementary Fig. S2B), indicating that  Pitting analysis consisted in comparing DAPI -RESA high population in P.f.-RBCs before and after passing through the device. We also included in this comparison uRBCs before and after passing through the device to exclude any possible confounding product of alterations in RBCs due to the mechanical passage through its slits (Fig. 6A). Beside the very low frequency of DAPI -RESA high population in all samples, results from seven independent infections showed that frequencies of pitted uRBCs and O-iRBCs (DAPI -RESA high ) after passing through both device models were significantly higher when compared to the proportion of this cell population before its passage through the microchannels (Fig. 6B). This was done for the twelve devices used in each experiment. The finding that uRBCs, which by definition are DAPI -RESA -, become DAPI -RESA high upon its passage through the device was unexpected and probably indicates that some cellular alterations are induced by the mechanical passage of the cells that makes them autofluorescent or prompt to unspecific binding of RESA antibody to its membrane. Nevertheless, when we compared frequencies of "pitted" uRBCs (DAPI -RESA high ) with truly P.f.-RBCs (DAPI -RESA high ) we found a significant higher (p < 0.05) (22 fold) increase of pitted P.f.-RBCs after passing through both device models (Fig. 6B). These results suggest that the passage of P. falciparum-infected RBCs through the microdevices slits caused the loss of parasites, leaving once-infected RBCs expressing RESA antigen on their surface, thus, evidencing the mechanical pitting phenomenon of malaria infected RBCs and supporting our theoretical prediction of suitability of these devices for modelling the pitting function of the spleen.
Imaging. In order to visualize the pitting process occurring in P.f.-RBCs flowing through the slits of the devices, we recorded several movies in the laser scanning confocal microscope. The compilation of movies recorded showed systematically RBC deforming while passing through the smaller slits (2 µm-wide) ( Fig. 7 and Supplementary Movie 1). Of note, P.f.-RBCs were distinguished by the presence of hemozoin, seen as an intracellular dark dot in the infected cells. Remarkably, we observed in a number of cells the retention of such dots in the slits and the exit of empty O-iRBC from these slits during its passage through the devices (Fig. 7), consistent with the results obtained in the pitting quantification by flow cytometry (Fig. 6). These results strongly suggest

Discussion
Here we constructed two different devices to specifically study the pitting function of the spleen where a single fluid flow, only emulating the slow-flow compartment of the spleen, forces RBCs to sequentially pass through slits of decreasing sizes. Pitting is defined as the removal of solid particles from the cytoplasm of a red cell without destructing the cell. Originally observed in hereditary non-spherocytic hemolytic anemia 12 , the presence of other red cell particles such as red-cell nuclei, Heinz bodies and Howell-Jolly bodies, as well as malaria parasites and Bartonella in splenectomized patients 2 , indicates that pitting is a corrective action in red blood cell disorders, such as hemolytic anemias. www.nature.com/scientificreports/ Two different microfluidic devices mimicking the minimal functional filtering unit of the spleen have been previously reported 6,7 . In the first one, emulations of the 90% fast-flow and 10% slow-flow human spleen compartments as well as IES, were used to demonstrate the filtering capacity of the spleen 6 . Aged and P. yoelii-infected reticulocytes passing through this device using physiological flow-rates indeed demonstrated that aged cells got significantly trapped in the IES as opposed to the more flexible infected-reticulocytes. A limitation of such device, however, was the low numbers of IES, thus limiting the statistical power to reach biological meaningful numbers of retention/passage of aged or infected cells. To further study spleen IES retention with statistical power, another device was designed and constructed containing eight filtering units each comprising more than fifty 2 µm slits 7 . Using such device, it was elegantly demonstrated that heat-treated RBCs, P. falciparum-infected RBC and cells from patients with hereditary spherocytosis were significantly retained, albeit variably, in their passage through the IES. Neither studies, however, reported observations on pitting casting doubts on whether this phenomenon is only due to the mechanical forces in the squeezing of infected-RBC through the slits.
Due to changes on the mechanical properties of the RBCs forced through the microfluidic devices, precisely the total number of 2 µm slits is 120 for model 1 and 498 for model 2 (Fig. 1), it was of upmost importance to demonstrate that hemolysis was not a confounding factor when studying pitting in these devices. Hemolysis analysis of uRBC and P.f.-RBCs, indeed showed that the passage of cells through the microchannels allows their deformation and constriction without causing rupture, validating thus the use of these devices for pitting studies (Fig. 4). However, the analysis of pitting by flow cytometry showed that a small fraction of uRBCs become fluorescent after its mechanical passage of cells through the channels, probably indicating some degree of cell damage that may have caused unspecific binding of antibodies to its cell membrane or death-induced autofluorescence, altering scatter properties and generating a once-infected red blood cell, "O-iRBC phenotype" (DAPI -RESA high ). It is already known that autofluorescence commonly overlaps with the spectrum of research fluorophores, and consequently interferes with the fluorescent microscopy and cytometric analyses 13 . In spite of this unwanted effect, statistical analysis demonstrated that both devices modelled the mechanical removal of P. falciparum parasites, as was shown by flow cytometry analysis (Fig. 6). In addition, fluorescence (Fig. 5) www.nature.com/scientificreports/ and light microscopy ( Fig. 7 and Supplementary Movie 1) also demonstrated that pitting of P. falciparum in the spleen can occur by mechanical forces. The product of pitting is the creation of surface area depleted RBCs 2 termed spherocytes, a term that indicates cells that are less disc like than normal RBCs. Very relevant, in patients with malaria the clearance of blood-stage parasites is faster after treatment with artemisinins than with other antimalarial drugs (e.g., quinine). Artemisinins act very early in the parasite's asexual life cycle where young parasite forms (rings) are cleared before they mature to potentially pathogenic cytoadherent forms 14 . These two pharmacodynamics effects, which are not achieved by quinine, are believed to reduce the morbidity and mortality of severe malaria in Southeast Asia and sub-Saharan Africa 15,16 . Newton and collaborators observed that the O-iRBC count rise was faster for patients treated with an artemisinin derivative than those treated with quinine, which probably reflects the greater efficacy of artemisinin derivatives in killing or damaging circulating ring-stage parasites 17 . P. falciparum rings exposed to artemisinins appear morphologically similar to Howell-Jolly bodies and are expelled from their host RBC in the same way. Consistent with these similarities, pitting of infected RBCs does not occur in splenectomized patients or in in vitro culture. Ndour and collaborators analyzed the pitting rate of P.f.-RBC after exposing them to artesunate in vitro by filtering them through microsphere layers, which means that mechanical interactions are involved in pitting 18 .
It is worth of mentioning that the pitting rate concept, defined by Buffet and collaborators 19 in the context of malaria is different from the classical rate of circulating pitted RBCs 2 . Actually, it is of importance to make a clear distinction between both terms because they imply opposite situations. The classical concept of pitting, or culling, is used as the gold standard for assessing the filtering function of the spleen in patients with potential asplenia 2 . It results from the removal of (non-microbial) intracellular remnants by macrophages as evidenced by small surface depressions that can be visualized using differential interference microscopy (Nomarsky optics). Because this process removes part of the RBC membrane, pitted RBCs become less deformable and are cleared from the circulation by the spleen. Thus, a rate of circulating culled RBCs too high is an indication of a higher risk for overwhelming infection due to functional asplenia 2 . By contrast, in the context of malaria patients, RBCs from which parasites have been removed (or pitted) are called once-infected red blood cells (O-iRBCs) and visualized as RESA positive cells lacking the parasite nucleus (DAPI negative) 19 . Since O-iRBCs are not detected in the peripheral blood of asplenic malaria patients, their presence is a marker of spleen-clearing functions.
Future functional studies of the collected DAPI -RESA + cells (O-iRBCs) after passing through the device would help answering the question about function preservation of these cells. Theoretically and from the evolutionary point of view, the main goal of the pitting process is believed to mitigate the anemia caused by the RBC destruction in the infection process. This way, the O-iRBCs would continue to be functional, at least for some more time, and oxygen transportation would not be as affected as if these previously parasitized cells were destroyed 20 . Indeed, this extra time granted has been calculated and the mean lifespan of these "deparasitized" RBCs is 7.6 days, compared with a mean RBCs lifespan of 43 days [21][22][23] . Removal of the parasite from the erythrocyte and subsequent phagocytosis, seems to be a more-efficient defense mechanism than ingesting the infected erythrocyte. This mechanism of destroying the parasite is common, and it may be particularly important during high parasitemias when the prevention of erythrocyte destruction is beneficial to the host 23 . Moreover, because pitted erythrocytes are derived from cells parasitized with ring stages, which consume little hemoglobin, it is likely that these salvaged cells can contribute to the transport and delivery of oxygen and carbon dioxide, attenuating the consequences of parasitism 17 .
To overcome some of the limitations of this study, we contemplate as a future work increasing the number of experiments included, which will be better to find differences in the statistical analysis. Also, the use of freshly drawn blood from patients with malaria in different disease stages, which may have consequences concerning cell membrane flexibility. These issues could be addressed in the future by testing the devices in the field. Finally, we seek to perform experiments with blood samples from splenectomized patients and patients with other hemolytic anemias, so that the pitting performance will be analyzed in other cell inclusion particles.

Conclusions
We have developed a microfluidic device that replicates ex vivo the mechanical pitting of P. falciparum-infected RBCs of the spleen leaving a population of once infected RBCs deparasitized. This demonstrates that pitting can be achieved without the involvement of phagocytic cells by means of mechanical forces. Although pitting is a classic concept in the literature, little is known about the details of this process itself. Thanks to this work, we have now a better understanding of this process, both from the physical and biological point of view. Furthermore, we have been able to replicate the pitting of P.f.-RBCs thanks to the portable microfluidic devices, which prompts us to think that our design thus has applications for exploring pathophysiology in malaria and other hemolytic anemias where pitting corrects for red blood cells with solid particles in the cytoplasm without destructing the cell. www.nature.com/scientificreports/ Publisher's note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http:// creat iveco mmons. org/ licen ses/ by/4. 0/.