Correction to: Scientific Reports https://doi.org/10.1038/srep32049, published online 25 August 2016
In this Article, Figure 4 contains an inappropriate base line correction and signal-to-noise (S/N) ratio duplication at low angle between the 5–10 degrees (2θ). The correct Figure 4 without any spectral processing appears as Figure 1.
As a result, in the Results section,
“The XRD patterns of the delaminated MXene have very weak peaks comparable to those previously reported12. The peak of MXene at 13° (2θ) shifts to 11° and 9° in the cases of Ag@ and Au@Mxene hybrids, respectively.”
should read:
“The XRD patterns of the delaminated MXene have very weak peaks comparable to those previously reported12.”
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Satheeshkumar, E., Makaryan, T., Melikyan, A. et al. Author Correction: One-step Solution Processing of Ag, Au and Pd@MXene Hybrids for SERS. Sci Rep 10, 16069 (2020). https://doi.org/10.1038/s41598-020-72793-y
Published:
DOI: https://doi.org/10.1038/s41598-020-72793-y
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.