Standardized identification of genotypes is necessary in animals that reproduce asexually and form large clonal populations such as coral. We developed a high-resolution hybridization-based genotype array coupled with an analysis workflow and database for the most speciose genus of coral, Acropora, and their symbionts. We designed the array to co-analyze host and symbionts based on bi-allelic single nucleotide polymorphisms (SNP) markers identified from genomic data of the two Caribbean Acropora species as well as their dominant dinoflagellate symbiont, Symbiodinium ‘fitti’. SNPs were selected to resolve multi-locus genotypes of host (called genets) and symbionts (called strains), distinguish host populations and determine ancestry of coral hybrids between Caribbean acroporids. Pacific acroporids can also be genotyped using a subset of the SNP loci and additional markers enable the detection of symbionts belonging to the genera Breviolum, Cladocopium, and Durusdinium. Analytic tools to produce multi-locus genotypes of hosts based on these SNP markers were combined in a workflow called the Standard Tools for Acroporid Genotyping (STAG). The STAG workflow and database are contained within a customized Galaxy environment (https://coralsnp.science.psu.edu/galaxy/), which allows for consistent identification of host genet and symbiont strains and serves as a template for the development of arrays for additional coral genera. STAG data can be used to track temporal and spatial changes of sampled genets necessary for restoration planning and can be applied to downstream genomic analyses. Using STAG, we uncover bi-directional hybridization between and population structure within Caribbean acroporids and detect a cryptic Acroporid species in the Pacific.
Genotype identification and tracking are required for well-replicated basic research experiments and in applied research such as designing restoration projects. High-resolution genetic tools are necessary for large clonal populations where genets can only be delineated via genotyping. The advent of reduced representation sequencing methods such as Genotype-By-Sequencing (GBS) or Restriction-site Associated DNA Sequencing (RADseq) have made it possible to assay a large number of single-nucleotide polymorphism (SNP) loci in any organism at a reasonable cost1. These methods are widely used in population genomics but have the disadvantage that the SNP loci are anonymous. Thus, there is no guarantee that the same set of SNP loci will be recovered from each sample within an experiment or between experiments, making it more difficult to design standardized workflows. To circumvent this issue, standardized SNP probes can be designed for reproducible genotyping and analysis from hundreds of samples using modified RAD-based approaches like Rapture2, RADcap3, and quaddRAD4 or using hybridization-based SNP genotyping arrays. Hybridization-based SNP arrays tend to have lower error rates then RADseq methods5,6 and thus increased accuracy of genet identification and tracking. However, both approaches forgo discovery of new SNP loci in favor of assaying a standard set of probes across all samples resulting in some ascertainment bias7,8,9.
When it comes to the analysis of SNP genotyping data, familiarity with computer programming and access to high performance computing is typically required but not always available. Because genotyping arrays contain a known set of SNP loci, standardized workflows can be designed easily. Galaxy is an open source, web-based platform for data-intensive biomedical research10 and provides the underlying framework for Science Gateways. Science Gateways are extensions of cyberinfrastructure, like Galaxy, that focus on a specific scientific communities’ needs by providing digital interfaces of computational resources which lowers the barriers (know-how and cost) often associated with these resources. The use of a standardized workflow within a Scientific Gateway enables scientists and restoration practitioners to accurately match samples to existing genets and strains, discover novel genets/strains and track their fate across years, all from a web browser.
Corals, like other clonal plant and animal species, reproduce frequently via asexual fragmentation11,12,13,14,15. Over time coral genets can extend over tens of meters consisting of tens to hundreds of colonies16,17,18. This leads to considerable variability in genotypic evenness and richness on small spatial scales, ranging from minimal clonal replication to reefs dominated by a single genet 12,14,18,19. The importance of coral genets in explaining variation in growth rates and stress response is becoming increasingly clear20,21,22,23,24. Further, hermaphroditic corals species like the Caribbean acroporids are mainly self-incompatible, thereby requiring the presence of gametes from different genets for successful sexual reproduction25,26. For these reasons, identification of genets and preservation of genotypic diversity are conservation priorities27.
Tropical corals frequently house single-celled photosynthetic algae in the family Symbiodiniaceae that provide the majority of the hosts organic carbon28,29. Coral species differ in their symbiont specificity, and colonies may house several algal genera within their cells at a given time. Thus, the complex mixtures of coral and algal DNA present challenges and opportunities for the development of high-resolution co-genotyping methods. Microsatellite markers specific for certain species of algae have further revealed subspecies level strain diversity and elucidated the temporal and spatial dynamics of symbiont strain/host genet associations30,31,32,33,34,35,36,37,38, but no SNP-based markers are available yet. Given that the algal species associated with a coral colony can influence the colony’s physiology, it is also of interest to researchers and practitioners to identify the dominant and any background symbionts in coral samples.
Corals often occur in remote locations without access to molecular laboratory and computation facilities or require special export permits to transport tissue samples to well-equipped facilities. Thus, we aimed to develop a genotyping array designed for instruments available at most major hospitals around the world. Genotyping arrays can be processed by a sequencing facility with user supplied tissue (as well as extracted DNA; Fig. 1) eliminating the need for a molecular laboratory and therefore, can be widely adopted by users without access to such facilities.
Here, we report the development of a SNP array and standardized analysis workflow for the most speciose genus of coral, Acropora. The roughly 120 Acropora spp. dominate shallow reefs in the Pacific and Atlantic oceans39,40. In the Caribbean, the primary shallow reef builders are Acropora palmata and A. cervicornis, which form a hybrid (commonly known as A. prolifera)41,42,43. Because of drastic population declines, they are listed as threatened under the U.S. Endangered species act, making them the focal species in reef restoration efforts across the Caribbean. Promoting genotypic diversity within nurseries and outplanting sites is a management priority for these species. We present a ~ 30k SNP genotyping array that identifies host and symbiont genotypes, coral hybrid status and background symbiont genera. The array can be analyzed cost-effectively in a standardized manner using the Standard Tools for Acroporid Genotyping (STAG) within a Galaxy environment (Fig. 1). We further establish a publicly available database of Acropora genets. This approach can serve as a template for other asexually producing species of conservation concern.
Array design and validation
We identified 1.6 million high-quality coral SNPs that varied between the genomes of 42 previously sequenced A. palmata and A. cervicornis from four locations (Belize, Curacao, Florida, and U.S. Virgin Islands) using two variant callers, samtools mpileup44 that uses likelihood scores and freebayes45 that uses Bayesian posterior probabilities for variant calls. After Affymetrix filtered the 34,783 coral loci, the final array contained 32,124 loci with 53,579 probes, broken down into 25,889 fixed, 17,803 population and 9,887 A. palmata variable probes (Table S1 and Fig. 2). The majority of these variable sites are found within introns of coding sequences in the A. digitifera genome, followed by intergenic regions (Fig. 2b).
When comparing two deeply-sequenced A. palmata and A. cervicornis genomes to the reference S. tridanidornium genome, we identified 2,657 high-quality symbiont SNPs using samtools mpileup44. When comparing 42 coral genome samples including the two above46 to the draft genome of A. cervicornis ‘like’ S. ‘fitti’, 60,946 SNPs were considered high-quality (Reich et al., In Prep). Applying similar filtering methods to identify so-called ‘fixed’ differences between strains and populations as was done in the coral, we were left with only a small fraction of SNPs. Given the status of the S. ‘fitti’ genome analysis at the time of the array design, we submitted more probes from the first comparison than the latter (2,269 from first comparison and 380 from the second comparison). Those loci were mostly found in the intergenic regions of the Symbiodinium genomes (Fig. 2b). Of the 2,661 symbiont loci we submitted, all were retained in the final array with 4,021 probes covering fixed (n = 3,663), population (n = 304) and genera (n = 54) categories (Table S1).
The recommended coral probes from the first plate were designated as the genotyping probes for the Caribbean acroporids in all subsequent analyses (Fig. 2c and Table S2). For the symbionts, all samples from the five plates that passed quality filtering (n = 293 samples) were re-analyzed together using the ‘Best Practices Workflow’ (BPW). The recommended probes were reduced further after removing probes that matched draft genome assemblies of A. palmata (Kitchen, unpublished), A. cervicornis (Kitchen, unpublished), A. tenuis 47, A. hyacinthus 47, and A. millepora 48 with high homology (blastn, e-value 1e−13), were not classified as Poly High Resolution, and had limited resolution outside of Florida samples (see Table S3). In particular, there were 146 probes that only distinguish the deeply-sequenced A. cervicornis symbiont strain, 247 probes that only distinguish the deeply-sequenced A. palmata symbiont strain, and 944 probes that distinguish the Florida A. cervicornis symbiont strains (n = 36 samples) from all the other samples. This resulted in 531 symbiont genotyping probes for downstream analysis.
The genotype success for each plate is presented in Table S4. The quality was first assessed by the background fluorescence of the non-polymorphic probes, or dish quality with a threshold of 82%. Then, only the samples with a call rate of 97% for the coral or symbiont probes, respectively, proceeded to the next step in the analysis. Because some of the samples were symbiont-enriched DNA or exclusively symbiont culture DNA, they failed BPW for the coral probe set. Alternatively, coral sperm and larvae failed the symbiont probe set (Table S4). Overall, Caribbean coral genotype calling was successful for samples with DNA concentrations as low as 0.064 ng/µl and as high 203.34 ng/µl (Table S5). Symbiont genotype calling worked for samples with DNA concentrations ranging from 0.23 to 203.34 ng/µl (Table S5).
Coral genotyping via analysis portal
Four hundred seventy-nine corals (out of 520) were successfully genotyped using the genotyping probe set (Table S4 and Fig. 3a) in the Galaxy CoralSNP analysis environment. The missing data ranged from 0.06% to 3.22% for the samples analyzed on the array (Fig. S1). Plates differed in the amount of missing data that we attributed to a batch effect of sample preparation, but not sample preservative or extraction method because these were shared between plates. A significant positive correlation was detected between percent missing data and percent heterozygosity for each species (Pearson’s Correlation, A. palmata R2 = 0.4507, p = 8.142e−14; A. cervicornis R2 = 0.8223, p < 2.2e−16; Fig. S2a), both of which are indications of sample quality. Misclassification of heterozygous calls can occur in samples with lower quality49,50.
Technical variation between replicate runs of the same DNA was low with an average genetic distance of 0.0053 ± 0.0015 between technical replicates (Mean ± 1 SD; samples SI-1, SI-10, SI-12, Table S6 and Fig. 3b). The average pairwise genetic distance of ramets from the same genet (clone mates) within a plate was 0.0038 ± 0.0026 and between plates was 0.0079 ± 0.0041 (Fig. 3b). Due to the larger genetic distances between technical replicates than ramets observed within a plate, we tested for differences in the five plates. There was a significant effect of plate on the genetic distance of ramets analyzed within plate (1-way ANOVA, F (4,391) = 17.58, p = 2.81e−13). Plate 9SR22843, which contained the technical replicates, had larger average pairwise genetic distances between ramets and technical replicates within the plate compared to three of the other plates (Tukey HSD, 9SR22843 was on average 0.0014 larger than 9SR22844 p = 0.0003; 9SR22843 was on average 0.0015 larger than P9SR10073 p = 0.0019; 9SR22843 was on average 0.0025 larger than P9SR10076 p = 0.0000).
The threshold for genet assignment of samples was defined using previously identified ramets, ranging from two to six ramets per genet (shared baums_coral_genet_id in Table S5). The largest genetic distance within known ramets was ca. 0.0312 between a genome sample and array sample (ie. 14120_Mixed and 4960, Table S7). We used pairwise genetic distance = 0.032 as the threshold for genet assignment based on the observations above (Fig. 3c). The average pairwise genetic distance among ramets was 0.0064 ± 0.0064 for all genet IDs with more than one ramet and ranged from 0.0006 to 0.0312 (Table S7). Additionally, tissue from eight genets extracted in two different laboratories recovered the same genet ID, albeit with differences in DNA concentration, missing data, and percent heterozygosity of the fixed probes (Fig. 3b and Table S8). There was between 0.012 to 0.027 pairwise genetic distance among ramets of the same genet in this set, which is like what was observed for differences in genotyping methods (genome sequencing vs. array) and is within the genet threshold.
Between genet pairwise distance was on average 0.113 ± 0.023 for A. cervicornis and 0.128 ± 0.025 for A. palmata (Fig. 3c). In the case of siblings from outcrossed offspring, the genetic distance ranged from 0.047 (SWSA-140 and SWSA-124) to 0.078 (SWSA-105 and SWSA-128) with an average genetic distance of 0.0642 ± 0.0068 (Fig. 3c). Heterozygosity also varied by species and geographic region, ranging from 0.110 to 0.127 in A. cervicornis and 0.132 to 0.156 in A. palmata (Table 1 and Fig. S2b). The inbreeding coefficient FIS, which calculates the proportion of alleles within an individual that are shared with the population, was highest in Belize and Florida in both species (Table 1).
Genet resolution was reproducible across collection years, plates and different laboratories (Figs. 3b, 4 and Table S8). For example, HG0127 and HG0170 were recovered from samples collected between 2005 to 2018 and run on two different plates (Fig. 4b). There was only one case where a genet defined via microsatellite genotyping was split into two genets as defined via SNP genotyping (blue lineage in Fig. 4b). In the inverse situation, there were four cases where genets defined via microsatellite genotyping were no longer considered to be unique genets and combined with other samples defined via SNP genotyping (Table S5).
A Neighbor-Joining tree (Fig. 4a) using the Prevosti’s genetic distance and identity-by-state analysis (Fig. S3) clustered the samples, first by species and then by their collection location. However, the geographic regions were not clearly delineated using these methods. We could recover population clusters using an unsupervised model-based approach with ADMIXTURE (Fig. 4c). After genet correction and applying a minor allele threshold of 5%, 18,823, 7,019, and 6,097 coral loci remain for all three taxa (n = 193 samples), A. palmata (n = 90 samples) and A. cervicornis (n = 64 samples), respectively. The ancestry of each sample was assessed assuming two source populations for the full dataset and two to ten populations for each species separately. For K = 2 of the entire dataset, the two species clearly separate with the hybrids having mixed ancestry (Fig. 4c). The lowest prediction error for A. cervicornis was three inferred populations (Fig. S4) with a population in Florida, a population in Belize and a population in USVI and Puerto Rico (Fig. 4c). Three populations were also predicted in A. palmata with a population in Florida and Belize, a population in Puerto Rico and a population in the Curacao (Fig. 4c).
The genetic species assignment was based on 9,072 fixed probes. The proportion of ancestry from each parental species was calculated for each sample and used to identify hybrids (Fig. S5). There were 39 A. prolifera hybrids of which all but one appears to be a F1 hybrid (Fig. 4c and Fig. S5). Based on the field calls, one hybrid detected with the array data was previously misidentified as A. palmata and 11 samples identified as hybrids in the field (n = 7 larvae and n = 4 adults) were assigned to one of the parental species instead.
There were 293 samples that passed the BPW for the symbiont probes. Unlike the coral samples, the extraction method mattered for symbiont DNA recovery and genotyping. This is exemplified by the failure of all but one replicate DNA extractions using the magnetic bead protocol and successful genotyping of all samples after DNA extraction with the QIAGEN DNeasy kit. One hundred and eighty six putative S. ‘fitti’ strains were identified based on a genetic distance threshold of 0.0018. We call these putative strains based on the limited a priori information available for setting the strain detection threshold. Enriched symbiont DNA and mixed DNA extractions from the same tissue shared the same strain ID as did technical replicates of the same DNA extractions from the same ramet (Table S5).
Sometimes more than one strain can be present in a given host and the strain ID might represent a mixture of different S. ‘fitti’ strains. We attempted to identify colonization of single or multiple strains in a host sample through various supervised and semi-supervised classification methods using the signal intensity of the symbiont genotyping probes. The posterior probabilities of the linear discriminant analysis (LDA) were used to determine likely colonization status for the known and unknown samples (Fig. S6a). There was a difference in the distribution of the multiple and single colonized samples on LD1 (Fig. S6a); however, two single strain samples overlapped the distribution of samples with multiple strains. More unknown samples overlapped with the distribution of samples with multiple strains compared to the distribution of samples with a single strain (Fig. S6a). The decision tree had an accuracy of 53.6% and only required signal intensity of two probes for the classification with the lowest cross-validation error (probes AX.197983721.B and AX.198082605.A, Fig. S6b). For the random forest model, the accuracy was estimated to be 66.9% with higher classification error for the single strain samples (multiple error = 29.4%, single error = 54.5%). Five trees were predicted to have the lowest error with the largest number of nodes, one of which is presented in Figure S6c. Naïve Bayes had an accuracy of 69.2% for the training data. Lastly, the semi-supervised k-nearest neighbor model had an accuracy of 65.8%. The results of all classification models were calculated as the percent agreement of multiple strains prediction (ex. 2 out of 5 tests predicted multiple strains = 40%). There were 112 samples that were likely colonized by a single strain (0–20% agreement for multiple) and 157 samples that were likely colonized by multiple strains (80–100% agreement for multiple) (Table S5).
In addition to multiple strains of S. ‘fitti’ present in a single coral host, the coral can be colonized by additional symbiont genera. We used the same classification methods above to detect background genera using the signal intensity of 18 genera probes (Table S9), but each sample was pre-assigned to a genus or classified as not colonized based on their allele patterns. The prediction accuracy of the LDA (Fig. 5), decision tree (Fig. S7a) and random forest (Fig. S7b) was 98.9%, 96.4% and 98.9%, respectively. The predictions for each model are presented in Table S5. The presence of Breviolum was detected in thirteen samples with one of the classification methods, ranging from 0.2% to 100% probability. Of these, seven had probabilities greater than 60% and two of those also had S. ‘fitti’ strain IDs indicating co-infection. The Cladocopium containing samples were split into two clusters, one contained samples that were exclusively A. muricata hosts (Cladocopium 2) and the other contained host samples that were A. cervicornis (n = 2), A. digitifera (n = 8), and A. millepora (n = 5). Finally, there were 49 samples with Durisdinium (n = 5 A. muricata, 3 A.cervicornis, 41 A. palmata). Samples containing either Cladocopium or Durisdinium failed the S. ‘fitti’ genotyping analysis.
Suitability for Pacific acroporids
Based on in silico genome searches, 26,963 of the coral probes matched A. hyacinthus, 28,395 matched A. millepora and 14,399 matched A. tenuis. Given that our probes were designed using the genome assembly of A. digitifera and that they had high homology to other species, we tested whether we could find a conserved set of probes across the Pacific acroproids for future genotyping studies. The Pacific samples were run separately for each species in the genotyping mode in the Axiom Analysis Suite to get the recommended probe sets. This analysis did not enforce a dish-quality threshold. A total of 15,717, 21,520 and 7,275 probes were recommended for A. digitifera (n = 9 samples), A. millepora (n = 5 samples) and A. muricata (synonom = A. formosa; n = 11 samples), respectively. Only those probes that were recommended for all three species were used for further analysis (n = 1,779 probes, Table S10). The pairwise genetic distance among A. digitifera samples ranged from 0.018 to 0.081 (Fig. 6a), with tight clustering in all but one sample. Two A. millepora samples were nearly identical (Prevosti’s distance = 0.00084) and differed only at two probes (Fig. 6b), while the largest pairwise genetic distance was only 0.024 (difference of 42 probes). Similarly, two A. muricata samples were also closely related, with a Prevosti’s distance of 0.004 (Fig. 6c). For this species a clear pattern emerged separating the nearshore and offshore samples with a maximum pairwise distance of 0.429 (763 probes, Fig. 6c). Although the sample size is too limited for each species to determine genotyping thresholds, less than 50 loci are necessary to identify the 33 unique genets in this dataset based on a genotype accumulation curve (Fig. S8).
Here we report the first genotyping array for corals, which in combination with an open access Galaxy Scientific Gateway to execute the Standard Tools for Acroporid Genotyping (STAG) workflow produces multi-locus genotypes for coral hosts and their algal symbionts. In the workflow, new user-supplied samples are compared to previously genotyped samples and their results contribute to the growing STAG database (Fig. 1). This archive of coral genets and symbiont strains can be used to identify reefs with high host and/or symbiont genetic diversity, temporal and spatial changes, and shuffling in host-symbiont pairings. In addition, a subset of the Caribbean genotyping probes can be used to genotype Pacific acroporids, expanding the utility of the STAG workflow to hundreds of species.
The SNP array and analysis workflow developed here delineate genets in agreement with the previous gold standard for Caribbean acroporid genotyping, multiplex microsatellite genotyping25. The STAG workflow uses 61% of the coral loci to produce the host genotype (Table S1) and identified 325 genets out of 479 genotyped samples (Table S4). The average genetic distance of 0.0064 (difference of 0.64%) among ramets was well below our maximum between genet genetic distance threshold of 0.032 (Fig. 3c), which accounts for both biological processes (mutations) and technical error during genotyping. We estimate that technical error accounts for ≤ 0.0053 (16.56%) of this variation based on the lower genetic distance observed within plate for both species than the replicate analysis on the same DNA extraction from a single tissue sample (Fig. 3b and Table S6). The differences observed in ramet genetic distance between plates may be due to the genotyping probe set applied to all plates irrespective of the recommended set for each plate (Table S2). Differences in genetic distances of ramets can also arise from DNA quality that is influenced by sample preservation, tissue type, extraction method, and extraction laboratory. We found a positive relationship between missing data and total heterozygosity (Fig. S2), suggesting that a portion of heterozygous genotype calls in the lower quality samples might be an artifact of technical error. This was evident in the different percent heterozygous estimate of the fixed probes in the between laboratory replicate extractions (Table S8). However, our technical error is similar to previous genotype concordance estimates ranging from 0.2% to 2.4% for replicates of a given subject genotyped on Affymetrix SNP arrays for humans50, rainbow trout6, soybean51 and walnut52. In that latter study, the variation was also higher between technical replicates than biological replicates, which the authors attributed to DNA quality. All these sources of technical variation are accounted for in the genotype assignment by the STAG workflow, resulting in robust coral genet identification.
Technical variability can be minimized by standardizing procedures. We recommend that adult samples of at least 3- 4 polyps are preserved in 95% non-denatured ethanol (190 proof), stored as cold as possible and extracted using the Qiagen DNeasy tissue extraction kit. DNA requirements are modest for the Axiom SNP array. Adult tissue, single larva and concentrated sperm were successfully genotyped in samples with DNA concentrations as low as 63 pg/µl, although higher concentrations are recommended. While high-quality, non-degraded DNA provided the best results, moderately degraded samples (i.e. extractions that show a dense band of high molecular weight DNA with some smearing across size ranges) were also successfully genotyped. DNA requirements with respect to quality and quantity are thus comparable to RADseq and whole genome sequencing techniques.
A. palmata and A. cervicornis differ in the scale of dispersal with A. cervicornis showing higher levels of population subdivision across the Caribbean and North Atlantic compared to A. palmata34,53,54,55,56,57. A. palmata stands were found to be structured into two long-separated East/West populations based on microsatellite data58, but additional samples from the Mesoamerican Reef Tract57 and the development of SNP markers59 resulted in the discovery of further population structure. Our results from a limited number of geographic locations identified three populations in A. palmata consistent with the previous study by Devlin-Durante and Baums59, recovering the East/West divide with additional substructure between Puerto Rico and Curacao in the East. We also recovered three populations in A. cervicornis, but with substructure detected between the Western Caribbean populations of Florida and Belize.
Quantifying the extent to which introgression has historically occurred and may occur now can elucidate the evolutionary and ecological significance of hybridization in acroporids. Using the species-specific fixed SNPs, we identified 39 F1 hybrid genets and corrected several species misidentifications in the field based on colony morphology (one classified hybrid identified as A. palmata in the field and two classified A. palmata identified as hybrid in the field). While F1 hybrids are more common, later generation backcrosses do occur41,42 albeit the direction of introgression has been debated42,60,61. Here, we identified one later generation hybrid that was classified as a putative backcross A. palmata (44.98% heterozygous and 52.7% A. palmata; Fig. S5) in contrast to earlier findings that backcrosses are restricted to introgression of A. palmata genes into the A. cervicornis genome. A recent report also found putative A. palmata backcrosses based on microsatellite data in the Lesser Antilles62. Together, these results support the conclusion of bidirectional introgression in Caribbean acroporids.
Because of the intimate association between corals and algae, the SNP array was designed to assay host and symbiont DNA simultaneously, a novel application for the Axiom SNP array. The array contains a much smaller number of symbiont-specific probes compared to host probes and thus information gleaned from these probes is more limited. The large genome size, haploidy and asexuality of Symbiodinium ‘fitti’, the dominant symbiont of the Caribbean acroporids33, presents challenges. The lower allelic diversity of S. ‘fitti’ microsatellite loci compared to the allele diversity of their cnidarian host counterparts necessitates using larger number of loci for strain resolution34. After exhaustive filtering of the symbiont genotyping probes based on their performance, only 20% of the loci remained which recovered reproducible strain identity in replicate ramets of a given genet. However, given the limited prior strain information for the samples, the conservative threshold we used for strain assignment will need to be validated with more known strains in the future. Only 58% of coral samples with symbionts yielded an S. ‘fitti’ genotype. Failures were either due to inefficient symbiont DNA recovery in the extraction or to presence of other Symbiodiniaceae genera. Comparison of strain resolution achieved with the SNP array relative to microsatellite strain resolution revealed previously unresolved strain diversity. However, it is not yet clear how much of this strain diversity results from mutational processes versus diversity produced as a result of recombination between strains34,63.
Acropora colonies are at times colonized by more than one strain of S. ‘fitti’34 but classification of colonies as being colonized by a single or multiple strains was challenging (Fig. S6). In contrast, the ability to detect the presence of other Symbiodiniaceae genera within coral samples is encouraging (Fig. 5). We detected eight A. cervicornis and 44 A. palmata colonies that harbored symbionts of the genera Breviolum, Cladocopium or Durusdinium. Of these, three A. cervicornis and three A. palmata are likely to be co-colonized by Breviolum and S. ‘fitti’, a combination of symbionts shown to be intermittent in A. cervicornis through profiling the ITS2 region64. Further, symbiont genera detected in nearshore (= Durusdinium) and offshore (= Cladocopium) A. muricata samples were consistent with a recent study by Hoadley, et al.65, although this taxon of Cladocopium (Cladocopium_2) was distinctly different from the other Cladocopium taxa (Cladocopium) containing both Caribbean and Pacific hosts (Fig. 5). The two Cladocopium groups differed in their signal intensities for the genera probes with samples in the Cladocopium_2 having signal intensity on average 4.5 × higher than samples within the Cladocopium group. Signal intensities may vary due to quantity of DNA, random difference in hybridization efficiency, and variable affinity of probes to different symbiont taxa within genera. Thus, we stress here that the SNP array cannot be used to derive quantitative differences among symbiont taxa associated with a coral sample. Moreover, DNA from cultured S. tridacnidorium was also on average 4 × higher than mixed Acropora-S. ‘fitti’ samples, suggesting that “pure” symbiont DNA extracts cannot be directly compared to mixed host-symbiont samples. Further experiments should benchmark the method by testing mixtures of Symbiodiniaceae genera with known composition.
Application of the current array to non-target Pacific acroporid species is possible when the sole intent is to delineate genets as is often required in restoration settings. Using a common set of acroporid probes, we genotyped three additional acroporid species and could identify members of the same genet. Interestingly, we observed genetic distances between A. muricata nearshore and offshore samples (0.405 ± 0.017) that were only slightly lower than those observed between A. palmata and A. cervicornis (0.684 ± 0.051), suggesting potential cryptic speciation between the two divergent A. muricata populations. Polyphyletic relationships between conspecific A. muricata have been observed66 as well as lack of fertilization among morphotypes67. To establish a robust threshold for genet assignment in Pacific acroporids, it will be necessary to add additional samples to the STAGdb that have also been genotyped using highly polymorphic microsatellite markers. However, because of the large ascertainment bias inherent in applying probes designed for Caribbean acroporids to long-separated Pacific species, population genetic models and models designed to detect loci under selection should not be applied to this data.
The combination of the tools presented here provides reliable, standardized identification of host genotypes in diverse Acropora spp. and symbiont strains of the Caribbean species. These markers and analysis tools can be used for basic research questions such as gene by environment interactions, hybridization history, or identification of loci under selection. Genetic linkage maps can be generated and inbreeding levels, and relatedness questions can be addressed. Because of the low error rate, the SNP array is particularly suited for the detection of somatic mutation, which are expected to be common in the large, old genets that are now dominating Caribbean Acropora populations. Restoration practitioners can use the information to design propagule transfer zones and choose genets for nursery rearing.
Materials and methods
Coral SNP selection
Coral samples were pulled from an archival tissue databank from previous collection efforts. Sample information can be found in Supplemental Table S4 and in the Supplemental Methods. DNA extraction methods varied depending on the tissue type, sample preservative and laboratory described in the Supplemental Methods. Protocols for sample collection (https://doi.org/10.17504/protocols.io.bec8jazw) and DNA extractions (https://doi.org/10.17504/protocols.io.bgjqjumw) are available. We previously identified 8.4 million SNPs between the two Caribbean acroporids and the Pacific acroporid A. digitifera, and of those 1.6 million high-quality SNPs varied between the Caribbean acroporids46. To create a conservative set of SNP, we additionally called variants with freebayes v1.1.0-50-g61527c545 using the same alignment file from the previous study and identified shared SNPs between the two variant callers with vcf-compare v0.1.14-12-gcdb80b868. From these shared SNPs, they were further refined into three informative categories: fixed, population and variable. The “fixed” SNPs are those variants where all 21 individuals of a given species share a nucleotide and the other 21 individuals of the other species share a different nucleotide. The fixed SNPs were filtered to a sample read depth of ≥ 3 and a minimum distance of 500 bp. We also retained those that we previously defined as PCR-ready (n = 894, no observed SNPs, indels, low-complexity DNA or unassembled regions within 50 bp on either side of the SNP (see Kitchen, et al.46). Population SNPs were identified based on pairwise comparisons of the four different collection sites (Table S11). These SNPs were filtered such that all samples from one site shared an allele with a frequency of 0.8 or greater and differed from the samples of the other site with the alternative allele at a frequency of 0.8 or greater. Finally, variable SNPs were identified by filtering the SNPs to a sample read depth of ≥ 4, allowing no ambiguous bases or repetitive sequences in 71 bp of flanking sequence, a minimum distance of at least 1,000 bp between surrounding SNPs, and an allele frequency between 0.5 and 0.7 for all 21 A. palmata samples while the variants was also observed in the A. cervicornis samples. SNP frequencies were calculated using –freq parameter with VCFtools68.
For each SNP, 35 bp of identical flanking sequence between the species was pulled from the A. digitifera genome assembly (NCBI: GCF_000222465.1; Shinzato, et al.69) using bedtools getfasta70. These 71 nucleotide (71mer) candidate sequences were filtered through a series of similarity searches to reduce non-specific sequence capture. First, the sequences were compared to the A. digitifera genome assembly using BLAST v2.6.0 (task = blastn, e-value = 1e−13) to determine whether redundant genomic targets were present. Sequences were discarded that had a ≥ 30 bp match with more than one genomic location. To check for repetitive probes, a same-strand self-analysis was performed using blastn (filter query sequence = false, word size = 11, -dust no, e-value = 1e−13, strand = both).
In addition to the SNP probes, we identified non-polymorphic sequences from acroporids by extracting high-quality SNPs that were identical between the two Caribbean acroporids and different from A. digitifera. We required a sample read depth of ≥ 6 reads with a minimum distance of 1,000 bp between SNPs and no repetitive or ambiguous bases in the 35 bp flanking sequence. We discarded probes that had significant overlap to the array probes (task = blastn, e-value = 1e−13) and randomly selected 3,000 to act as the background probes.
Symbiont variant calling and SNP selection
SNP discovery in the symbionts was accomplished by comparing our genome samples to two reference genomes, either the assembly of cultured S. tridacnidorum (NCBI: GCA_003297005.171) or partial assembly of the predominant symbiont of A. palmata and A. cervicornis, S. ‘fitti’ (Reich et al., unpublished), both of which belong to the genus Symbiodinium (ITS2-clade A3). Only 15–25% of the reads mapped to the symbiont genomes, reducing our ability to identify comparable number of SNPs in the symbiont as the coral. Some of the Symbiodinium SNPs were identified by comparing only the deep-coverage metagenome sequences of A. palmata and A. cervicornis to the genome assembly of S. tridacnidorum71. These SNPs were identified as fixed between the two representative Florida acroporids sampled, but it was unclear if they were fixed between the symbiont strains of the two coral species across their geographic range, just in Florida or just between these two samples. The other Symbiodinium SNPs were identified by mapping the 42 re-sequenced genome samples to a draft genome assembly of S. ‘fitti’ and processed as described in Kitchen, et al.46. High-quality SNPs were had a quality phred score > 200 and no more than 20% missing data at a given site among all samples. The 71 bp flanking sequences were filtered through the series of blast homology searches in the same manner as the coral SNPs described above. Finally, to confirm that the probes designed for the host and symbiont did not overlap, the final set of both groups were compared to each other using blastn with an e-value threshold of 1e−13. Symbiodinium non-polymorphic SNVs were identified from extracted genomic regions from the S. ‘fitti’ scaffolds with the highest gene coverage for the A. palmata and A. cervicornis samples. After searching the non-polymorphic probes against each other using blastn (task = blastn, e-value = 1e−13), a random subset of 3,000 probes was selected.
In addition to the genotyping probes, we identified 12 SNPs in loci used to distinguish genera of Symbiodinaceae to capture potential background symbionts. The most common genera associated with tropical corals are Symbiodinium, Breviolum, Cladocopium and Durisdinium and can be distinguished by genetic markers. These loci include ribosomal (internal transcribed spacer 2 and nr28S), mitochondrial (COI and cob), chloroplast (cp23S and psbA) and nuclear (elongation factor 2) markers using sequences from previously published studies72,73,74,75,76. Sequence accessions are provided in Supplemental Table S12. At least one representative sequence from each of the genera Symbiodinium, Breviolum, Cladocopium and Durusdinium for each locus was aligned with MUSCLE in Mega X77. SNPs were identified based on their ability to distinguish genera with enough conserved flanking sequence for probe design (Table S9).
SNP validation by genotyping
After filtering, 34,783 acroporid SNPs (15,644 fixed, 10,429 population and 6,050 variable) and 2,661 symbiont SNPs were submitted for review by Affymetrix (Thermo Fisher, Santa Clarita, CA, USA). Final probe construction was completed by their bioinformatics team (Table S1). The final coral probe set was run through snpEff v4.378 and the final algal probe set was compared to the respective GFF file for each Symbiodinium genome using bedtools intersect70 to determine genomic locations. The SNP density in bin sizes of 10,000 was extracted for all coral probes using VCFtools v0.1.1568.
Affymetrix optimized their current genotyping tools and pipeline to provide dual genotyping of the coral and symbiont in a single run. Five 96-well plates (Applied Biosystems Axiom Coral Genotyping Array—550962) were processed on the GeneTitan (Thermo Fisher, Santa Clarita, CA, USA). The raw data was analyzed using the Axiom ‘Best Practices Workflow’ (BPW) in the Axiom Analysis Suite software (Thermo Fisher, Santa Clarita, CA, USA) for each of the five runs separately for the coral and algal probe sets, with default quality filtering thresholds. Important thresholds that identify low sample quality include the dish quality, which is the signal of the non-polymorphic probes from one individual to the next, and call rate, which is the proportion of assigned genotypes for an individual out of all tested probes. The Bayesian clustering algorithm BRLMM-P79 was used to compute three posterior cluster locations (AA, AB, and BB) based on pre-positioned genotype cluster locations called priors. Genotype calls were made by identifying the intensity distribution, or cluster, each sample most likely belongs to with a confidence score (1 – posterior probability of the sample assignment to genotype cluster). In the case of the symbionts, because they are haploid, the algal genotyping probes were treated as mitochondrial probes with only homozygous AA or BB allele calls being valid. Five of the symbiont genera probes allowed for three clusters when multiple alleles were predicted to separate different genera (Table S9).
Following the analysis of the five plates, the performance of each probe was classified into six categories based on their separation of genotype clusters with SNPpolisher (Affymetrix, CA, USA) (Table S1). These categories include Poly High Resolution, Mono High Resolution, No Minor Hom, Call Rate Below Threshold, Other and Off-Target Variant. Probes that fell under ‘Poly High Resolution’ are those with resolution of three clusters (AA, AB and BB) with at least two sample having the minor allele. Probes that fell under ‘Mono High Resolution’ are those where all samples share the same allele possibly due to low minor allele frequency or sample selection on the plate. Finally, probes that fell under ‘No Minor Hom’ are those where no minor homozygous allele is observed, only AA and AB. These three categories make up the “best and recommended” probe set that was used in downstream analyses (Table S2, S3 and S10, and Fig. 2c).
Standard tools for acroporid genotyping workflow
The general overview of the data conversion and genotype analysis steps are presented in Fig. S9a and code for new Galaxy tools can be found at (https://github.com/gregvonkuster/galaxy_tools/tree/master/tools/corals). Following the BPW, the genotypes were converted https://github.com/freeseek/gtc2vcf, filtered and combined with user-supplied metadata into a VCF (see Supplemental Methods), which are inputs for the Coral Multilocus Genotype tool executed through the R environment80. The VCF file was imported and converted into the genind format by the package vcfR v1.8.081. The genind contains the individual genotypes that is then converted into a genclone format utilized by poppr v2.8.3 for clone identification82,83. A distance matrix is calculated within poppr using the Prevosti’s absolute genetic distance84, or the number of allelic differences between two individuals. From the distance matrix, known clone mates (ramets of the same genet) or replicate extractions from the same sample (Table S5) were compared to define a threshold for genet detection. This threshold encompasses technical (ie. missing alleles, genotyping error or DNA extraction differences) and biological (ie. somatic mutation) variation. The threshold was applied using mlg.fitler in poppr resulting in the assignment of samples to multi-locus genotype IDs, or genet IDs. Samples assigned to a genet ID with previously genotyped samples in the database took on the previous genet ID (ex. HG0000), whereas samples without matches to previously genotyped samples were assigned new genet IDs. The representative sample of the new genet ID was identified using the clonecorrect function in poppr. A series of tables were generated from the analysis and imported into the respective database tables using the Update STAG Database tool (Fig. S9a). This tool parses the metadata and genet information to append new records to the postgreSQL database (Fig. S10).
The genetic distance matrix was used to calculate a neighbor-joining tree with 100 bootstrap replicates using the aboot function in poppr. An identity-by-state analysis was performed using SNPRelate as previously described46,85. The representative sample for each genet ID (n = 193, excluding the genome samples, offspring of a Curacao cross with sample ID = SWSA, and plate 9SR22844), was used to identify populations with ADMIXTURE v1.3.086 outside of the Galaxy portal. Plate 9SR22844 was excluded due to higher percentage of missing data (average 1.271 ± 0.581% out of 96 samples, Fig. S1e) and heterozygosity (average 14.163 ± 0.756% in A. palmata and 12.875 ± 1.020% in A. cervicornis, Fig. S2a) for the entire plate that contained only Puerto Rico samples compared to the Puerto Rico samples on plate P9SR10076 (average missing data of 0.501 ± 0.251% out of 73 samples and average heterozygosity of 13.801 ± 0.626% in A. palmata and 9.623 ± 0.446 in A. cervicornis, Fig. S1c). The exported VCF file from Galaxy was filtered for representative genets and loci were reduced after applying a minor allele threshold of 0.05 with VCFtools, and converted using PLINK v1.987. First, all representative genets were analyzed with inferred population of K = 2 from 20 replicates with different random seeds to identify hybrids. Second, the two Caribbean species were split and populations of K ranging from 2 to 10 were run on each species separately over 20 replicates with different random seeds. In each iteration of ADMIXTURE, the replicates were combined and merged using the CLUMPAK server88.
Genotypes were extracted from the VCF file using the extract.gt tool in the vcfR package to determine the species of each sample. The nominally fixed probes were filtered further based on data from three plates where allele calls shared by less than 90% of all samples of a species were removed. Missing data was calculated for the full probe set and the fixed probe set. The percentage of heterozygous alleles (AB) and the percentage of homozygous alleles matching each species in the fixed probe set was calculated. A sample was identified as A. palmata or A. cervicornis if more than 85% of the fixed alleles match the respective species. Hybrid samples were identified as having 40% or greater heterozygosity.
Galaxy CoralSNP analysis environment
The Galaxy Scientific Gateway called CoralSNP (https://coralsnp.science.psu.edu/galaxy) enables streamlined analysis of the Affymetrix genotype data described above to ultimately provide the user with a genet ID, converted raw genotype data, sample relatedness and hybrid status (Fig. 1). A baseline set of reports (https://coralsnp.science.psu.edu/reports) provides various views of the data, and additional reports will be added over time.
The straightforward process is shown in Figure S9b and described in additional detail in the Supplemental Methods. In brief, the user uploads their raw Affymetrix data files and metadata using the Upload File tool. Next, the user selects the appropriate files as inputs to the Queue Genotype Workflow tool (Fig. S9b), which validates the metadata (Validate Affy Metadata tool), executes the CoralSNP workflow (Fig. S9a) and updates a dataset that contains all previously genotyped samples as well as the STAG database (Fig. S10) with the samples in the current run (Update STAG Database tool).
It is imperative that the previously genotyped samples contained within this VCF file are synchronized with the previously genotyped sample records contained within the STAG database. The Ensure Synced tool confirms that the data contained within these two components is synchronized and creates backup copies of the VCF file and the database before updating either component. The Galaxy CoralSNP environment contains an independent tool named Export All Sample Data, which produces a tabular dataset consisting of all samples and associated metadata in the STAG database. This dataset can be saved locally for analysis within other environments. The dataset that contains all previously genotyped samples can also be downloaded from the Galaxy Data Library, providing more options for additional analyses outside of Galaxy.
All the code and configuration files needed for hosting a local Galaxy CoralSNP instance are available in GitHub, and the instructions for configuring the environment are here https://github.com/gregvonkuster/galaxy_tools/blob/master/galaxy/README. The CoralSNP workflow requires access to a dataset that contains all previously genotyped samples stored in a Galaxy Data Library (https://coralsnp.science.psu.edu/galaxy/library/list#folders/Fcba2ba6d6fdc5d84). The CoralSNP Science Gateway is hosted on a high-performance compute cluster environment managed by the Information Technology VM Hosting team at Pennsylvania State University.
Symbiont genotyping: strain identification and background genera detection
The symbiont genotype data was analyzed in a similar manner to the coral data, but outside the Galaxy environment. Symbiont genotyping probes were identified from the BPW of all five plates after additional filtering to remove host contamination and low-resolution probes (n = 531, Table S3). The genotyping probes were subset using VCFtools and analyzed with a modified version of the Coral Multilocus Genotype tool. Notably, the ploidy was set to haploid. Because there was limited a priori information on the symbiont stains from microsatellite data, the distance threshold was set based on farthest and nearest threshold calculated by cutoff_predictor in poppr. Symbiont strains were given strain IDs in the format of SG0000.
For multiple vs. single strain detection from a single coral sample, five classification methods were used based on signal intensities of the filtered genotyping probes for samples assigned a strain ID. The intensities for each allele of each probe was extracted from the raw CEL file using Axiom Analysis Suite. Samples with prior symbiont genotyping from 12 to 13 microsatellites were used as the training set for all classification models where any sample with more than one allele per microsatellite marker was considered as containing multiple strains of S. ‘fitti’ (n = 17 samples with multiple strains and n = 11 samples with a single strain). The remaining samples were the test set (n = 265). The two data sets were centered and scaled prior to analysis. The five classification tests included supervised learning models such as linear discriminant analysis (LDA) (MASS v7.3-51.4 R package89), decision tree (rpart v4.1-15 R package90 and rpart.plot v3.0.8 R package91), random forest (caret v6.0–84 R package92), naïve Bayes (caret v6.0–84 R package92), and semi-supervised learning model using k nearest-neighbor masking 30% of the training data (SSC v2.0.0 R package93). All tests, except for the LDA, were resampled three times with tenfold cross-validation to evaluate model fit. The results of the five tests are presented as the percent of multiple strain assignment for each genotyped sample.
The background genera were assigned based on the fit of three of the classification tests above: LDA, decision tree and random forest. All samples and probes were first visualized in the Axiom Analysis Suite software to identify patterns in samples with known background symbiont populations (A. cervicornis with Cladocopium: n = 294, A. cervicornis with Durusdinium: n = 2, Pacific acroporids with Cladocopium: n = 20 and A. muricata with Durusdinium: n = 565). Probes were filtered based on their recommended status (Table 1) and assignment of known samples above. A preliminary assignment of symbionts to genera was made for each sample based on their cluster patterns. The signal intensity for the genera probes (n = 18) was extracted for all samples regardless of their genotype status using the Axiom Analysis Suite. The data was split into 80% for training and 20% for testing. Cross-validation was performed on the decision tree and random forest models as described above.
The Galaxy CoralSNP analysis environment and database reports are available at https://coralsnp.science.psu.edu/reports. The metadata template is available at https://baumslab.org/research/data/. A tutorial for executing the analysis workflow is available https://protocols.io/view/tutorial-to-use-the-galaxy-coral-snp-stagdb-workfl-beqcjdsw.html. Protocols are available for how to sample corals for genotyping (https://doi.org/10.17504/protocols.io.bec8jazw) and how to extract DNA (https://doi.org/10.17504/protocols.io.bgjqjumw). The code for the new tools developed for this study are available at https://github.com/gregvonkuster/galaxy_tools/tree/master/tools/corals and https://github.com/gregvonkuster/galaxy_tools/tree/master/galaxy. Sequences for the genome samples are available on NCBI under SRA project SRP149363. The coral probe annotation is provided in Supplemental File 1 and the symbiont probe annotation is provided in Supplemental File 2. The Applied Biosystems Axiom Coral genotyping array is available in 96 (#550962) and 384 (#550961) sample format.
Altshuler, D. et al. An SNP map of the human genome generated by reduced representation shotgun sequencing. Nature 407, 513–516. https://doi.org/10.1038/35035083 (2000).
Ali, O. A. et al. RAD capture (Rapture): flexible and efficient sequence-based genotyping. Genetics 202, 389 (2016).
Hoffberg, S. L. et al. RADcap: sequence capture of dual-digest RADseq libraries with identifiable duplicates and reduced missing data. Mol. Ecol. Resour. 16, 1264–1278. https://doi.org/10.1111/1755-0998.12566 (2016).
Franchini, P., Monné Parera, D., Kautt, A. F. & Meyer, A. quaddRAD: a new high-multiplexing and PCR duplicate removal ddRAD protocol produces novel evolutionary insights in a nonradiating cichlid lineage. Mol. Ecol. 26, 2783–2795 (2017).
Darrier, B. et al. A comparison of mainstream genotyping platforms for the evaluation and use of barley genetic resources. Front. Plant Sci. 10, 544 (2019).
Palti, Y. et al. The development and characterization of a 57 K single nucleotide polymorphism array for rainbow trout. Mol. Ecol. Resour. 15, 662–672 (2015).
Moragues, M. et al. Effects of ascertainment bias and marker number on estimations of barley diversity from high-throughput SNP genotype data. Theor. Appl. Genet. 120, 1525–1534 (2010).
Malomane, D. K. et al. Efficiency of different strategies to mitigate ascertainment bias when using SNP panels in diversity studies. BMC Genomics 19, 22 (2018).
Lachance, J. & Tishkoff, S. A. SNP ascertainment bias in population genetic analyses: why it is important, and how to correct it. BioEssays 35, 780–786 (2013).
Afgan, E. et al. The Galaxy platform for accessible, reproducible and collaborative biomedical analyses: 2018 update. Nucleic Acids Res. 46, W537–W544 (2018).
Whitaker, K. Genetic evidence for mixed modes of reproduction in the coral Pocillopora damicornis and its effect on population structure. Mar. Ecol. Prog. Ser. 306, 115–124 (2006).
Miller, K. J. & Ayre, D. J. The role of sexual and asexual reproduction in structuring high latitude populations of the reef coral Pocillopora damicornis. Heredity 92, 557–568 (2004).
Stoddart, J. A. Asexual production of planulae in the coral Pocillopora damicornis. Mar. Biol. 76, 279–284 (1983).
Ayre, D. J. & Hughes, T. P. Genotypic diversity and gene flow in brooding and spawning corals along the Great Barrier Reef, Australia. Evolution 54, 1590–1605 (2000).
Adjeroud, M. & Tsuchiya, M. Genetic variation and clonal structure in the scleractinian coral Pocillopora damicornis in the Ryukyu Archipelago, southern Japan. Mar. Biol. 134, 753–760 (1999).
Foster, N. L., Baums, I. B. & Mumby, P. J. Sexual vs. asexual reproduction in an ecosystem engineer: the massive coral Montastraea annularis. J. Anim. Ecol. 76, 384–391. https://doi.org/10.1111/j.1365-2656.2006.01207.x (2007).
Neigel, J. E. & Avise, J. C. Clonal diversity and population structure in a reef-building coral, Acropora cervicornis: self-recognition analysis and demographic interpretation. Evolution 37, 437–453. https://doi.org/10.1111/j.1558-5646.1983.tb05561.x (1983).
Baums, I. B., Miller, M. W. & Hellberg, M. E. Geographic variation in clonal structure in a reef building Caribbean coral, Acropora palmata. Ecol. Monogr. 76, 503–519. https://doi.org/10.1890/0012-9615 (2006).
Pinzón, J., Reyes-Bonilla, H., Baums, I. & LaJeunesse, T. Contrasting clonal structure among Pocillopora (Scleractinia) communities at two environmentally distinct sites in the Gulf of California. Coral Reefs 3, 765–777. https://doi.org/10.1007/s00338-012-0887-y (2012).
Parkinson, J. E. & Baums, I. B. The extended phenotypes of marine symbioses: ecological and evolutionary consequences of intraspecific genetic diversity in coral-algal associations. Front. Microbiol. https://doi.org/10.3389/fmicb.2014.00445 (2014).
Polato, N. R., Altman, N. S. & Baums, I. B. Variation in the transcriptional response of threatened coral larvae to elevated temperatures. Mol. Ecol. 22, 1366–1382 (2013).
Baums, I. et al. Genotypic variation influences reproductive success and thermal stress tolerance in the reef building coral, Acropora palmata. Coral Reefs 32, 703–717 (2013).
Randall, C. J. & Szmant, A. M. Elevated temperature affects development, survivorship, and settlement of the Elkhorn coral, Acropora palmata (Lamarck 1816). Biol. Bull. 217, 269–282 (2009).
Meyer, E. et al. Genetic variation in responses to a settlement cue and elevated temperature in the reef-building coral Acropora millepora. Mar. Ecol. Prog. Ser. 392, 81–92 (2009).
Baums, I. B., Hughes, C. R. & Hellberg, M. H. Mendelian microsatellite loci for the Caribbean coral Acropora palmata. Mar. Ecol. Prog. Ser. 288, 115–127. https://doi.org/10.3354/meps288115 (2005).
Fogarty, N. D., Vollmer, S. V. & Levitan, D. R. Weak Prezygotic isolating mechanisms in threatened Caribbean Acropora corals. PLoS ONE 7, e30486. https://doi.org/10.1371/journal.pone.0030486 (2012).
Baums, I. B. et al. Considerations for maximizing the adaptive potential of restored coral populations in the western Atlantic. Ecol. Appl. 19, e01978 (2019).
Muscatine, L. & Cernichiari, E. Assimilation of photosynthetic products of zooxanthellae by a reef coral. Biol. Bull. 137, 506–523 (1969).
Davies, P. S. Effect of daylight variations on the energy budgets of shallow-water corals. Mar. Biol. 108, 137–144 (1991).
Santos, S. R. & Coffroth, M. A. Molecular genetic evidence that dinoflagellates belonging to the genus Symbiodinium Freudenthal are haploid. Biol. Bull. 204, 10–20 (2003).
Pettay, D. T. LaJeunesse TC (2007) Microsatellites from clade B Symbiodinium spp. specialized for Caribbean corals in the genus Madracis. Mol. Ecol. Notes 7, 1271–1274. https://doi.org/10.1111/j.1471-8286.2007.01852.x (2007).
Pettay, D. T. & LaJeunesse, T. C. Microsatellite loci for assessing genetic diversity, dispersal and clonality of coral symbionts in ‘stress-tolerant’ clade D Symbiodinium. Mol. Ecol. Resour. 9, 1022–1025. https://doi.org/10.1111/j.1755-0998.2009.02561.x (2009).
Pinzón, J. H., Devlin-Durante, M. K., Weber, M. X., Baums, I. B. & LaJeunesse, T. C. Microsatellite loci for Symbiodinium A3 (S. fitti) a common algal symbiont among Caribbean Acropora (stony corals) and Indo-Pacific giant clams (Tridacna). Conserv. Genet. Resour. 3, 45–47. https://doi.org/10.1007/s12686-010-9283-5 (2011).
Baums, I. B., Devlin-Durante, M. K. & LaJeunesse, T. C. New insights into the dynamics between reef corals and their associated dinoflagellate endosymbionts from population genetic studies. Mol. Ecol. 23, 4203–4215. https://doi.org/10.1111/mec.12788 (2014).
Wham, D. C., Pettay, D. T. & LaJeunesse, T. C. Microsatellite loci for the host-generalist “zooxanthella” Symbiodinium trenchi and other Clade D Symbiodinium. Conserv. Genet. Resour. 3, 541–544. https://doi.org/10.1007/s12686-011-9399-2 (2011).
Grupstra, C. G. et al. Evidence for coral range expansion accompanied by reduced diversity of Symbiodinium genotypes. Coral Reefs 36, 981–985 (2017).
Chan, A. N., Lewis, C. L., Neely, K. L. & Baums, I. B. Fallen pillars: the past, present, and future population dynamics of a rare, specialist coral-algal symbiosis. Front. Mar. Sci. 6, 218 (2019).
Andras, J. P., Kirk, N. L., Coffroth, M. A. & Harvell, C. D. Isolation and characterization of microsatellite loci in Symbiodinium B1/B184, the dinoflagellate symbiont of the Caribbean sea fan coral, Gorgonia ventalina. Mol. Ecol. Resour. 9, 989–993 (2009).
Veron, J. E. N. Corals of the World (Australian Institute of Marine Science, Townsville, 2000).
Wallace, C. C. Staghorn Corals of the World: A Revision of the Coral Genus Acropora (Scleractinia; Astrocoeniina; Acroporidae) Worldwide, with Emphasis on Morphology, Phylogeny and Biogeography (CSIRO publishing, Clayton, 1999).
van Oppen, M. J. H., Willis, B. L., van Vugt, J. A. & Miller, D. J. Examination of species boundaries in the Acropora cervicornis group (Scleractinia, Cnidaria) using nuclear DNA sequence analyses. Mol. Ecol. 9, 1363–1373 (2000).
Vollmer, S. V. & Palumbi, S. R. Hybridization and the evolution of reef coral diversity. Science 296, 2023–2025 (2002).
de Lamarck, J. B. P. A. Histoire Naturelle des Animaux sans Vertebres Vol. 2 (Verdiere, Paris, 1816).
Li, H. A statistical framework for SNP calling, mutation discovery, association mapping and population genetical parameter estimation from sequencing data. Bioinformatics 27, 2987–2993 (2011).
45Garrison, E. & Marth, G. Haplotype-based variant detection from short-read sequencing. arXiv:1207.3907 (2012).
Kitchen, S. A. et al. Genomic variants among threatened Acropora corals. G3: Genes Genomes Genet. https://doi.org/10.1534/g3.119.400125 (2019).
Liew, Y. J., Aranda, M. & Voolstra, C. R. Reefgenomics.org—a repository for marine genomics data. Database https://doi.org/10.1093/database/baw152 (2016).
Fuller, Z. L. et al. Population genetics of the coral Acropora millepora: towards a genomic predictor of bleaching. bioRxiv https://doi.org/10.1101/2020.02.10.943092 (2019).
49Hong, H. et al. in BMC Bioinformatics. (BioMed Central).
Hong, H. et al. Technical reproducibility of genotyping SNP arrays used in genome-wide association studies. PLoS ONE 7, e44483 (2012).
Lee, Y. G. et al. Development, validation and genetic analysis of a large soybean SNP genotyping array. Plant J. 81, 625–636 (2015).
Marrano, A. et al. A new genomic tool for walnut (Juglans regia L.): development and validation of the high-density Axiom™ J. regia 700K SNP genotyping array. Plant Biotechnol. J. 17, 1027–1036 (2019).
Baums, I. B., Johnson, M. E., Devlin-Durante, M. K. & Miller, M. W. Host population genetic structure and zooxanthellae diversity of two reef-building coral species along the Florida Reef Tract and wider Caribbean. Coral Reefs 29, 835–842. https://doi.org/10.1007/s00338-010-0645-y (2010).
Hemond, E. M. & Vollmer, S. V. Genetic diversity and connectivity in the threatened Staghorn coral (Acropora cervicornis) in Florida. PLoS ONE 5, e8652 (2010).
Vollmer, S. V. & Palumbi, S. R. Restricted gene flow in the Caribbean staghorn coral Acropora cervicomis: Implications for the recovery of endangered reefs. J. Hered. 98, 40–50 (2007).
Drury, C. et al. Genomic variation among populations of threatened coral: Acropora cervicornis. BMC Genomics 17, 286. https://doi.org/10.1186/s12864-016-2583-8 (2016).
Porto-Hannes, I. et al. Population structure of the corals Orbicella faveolata and Acropora palmata in the Mesoamerican Barrier Reef System with comparisons over Caribbean basin-wide spatial scale. Mar. Biol. https://doi.org/10.1007/s00227-014-2560-1 (2014).
Baums, I. B., Miller, M. W. & Hellberg, M. E. Regionally isolated populations of an imperiled Caribbean coral, Acropora palmata. Mol. Ecol. 14, 1377–1390 (2005).
Devlin-Durante, M. K. & Baums, I. B. Genome-wide survey of single-nucleotide polymorphisms reveals fine-scale population structure and signs of selection in the threatened Caribbean elkhorn coral, Acropora palmata. PeerJ 5, e4077 (2017).
Palumbi, S. R., Vollmer, S., Romano, S., Oliver, T. & Ladner, J. The role of genes in understanding the evolutionary ecology of reef building corals. Evol. Ecol. 26, 317–335. https://doi.org/10.1007/s10682-011-9517-3 (2012).
Miller, D. J. & Van Oppen, M. J. H. A “fair go” for coral hybridization. Mol. Ecol. 12, 805–807 (2003).
Japaud, A., Bouchon, C., Magalon, H. & Fauvelot, C. Geographic distances and ocean currents influence Caribbean Acropora palmata population connectivity in the Lesser Antilles. Conserv. Genet. 20, 447–466 (2019).
Liu, H. et al. Symbiodinium genomes reveal adaptive evolution of functions related to coral-dinoflagellate symbiosis. Commun. Biol. 1, 95. https://doi.org/10.1038/s42003-018-0098-3 (2018).
Thornhill, D. J., LaJeunesse, T. C., Kemp, D. W., Fitt, W. K. & Schmidt, G. W. Multi-year, seasonal genotypic surveys of coral-algal symbioses reveal prevalent stability or post-bleaching reversion. Mar. Biol. 148, 711–722 (2006).
Hoadley, K. D. et al. Host–symbiont combinations dictate the photo-physiological response of reef-building corals to thermal stress. Sci. Rep. 9, 1–15 (2019).
Rosser, N. L. et al. Phylogenomics provides new insight into evolutionary relationships and genealogical discordance in the reef-building coral genus Acropora. Proc. Roy. Soc. B: Biol. Sci. 284, 20162182 (2017).
Hatta, M. et al. Reproductive and genetic evidence for a reticulate evolutionary history of mass-spawning corals. Mol. Biol. Evol. 16, 1607–1613 (1999).
Danecek, P. et al. The variant call format and VCFtools. Bioinformatics 27, 2156–2158 (2011).
Shinzato, C. et al. Using the Acropora digitifera genome to understand coral responses to environmental change. Nature 476, 320–323. https://doi.org/10.1038/nature10249 (2011).
Quinlan, A. R. & Hall, I. M. BEDTools: a flexible suite of utilities for comparing genomic features. Bioinformatics 26, 841–842 (2010).
Shoguchi, E. et al. Two divergent Symbiodinium genomes reveal conservation of a gene cluster for sunscreen biosynthesis and recently lost genes. BMC Genomics 19, 458 (2018).
Takishita, K., Ishikura, M., Koike, K. & Maruyama, T. Comparison of phylogenies based on nuclear-encoded SSU rDNA and plastid-encoded psbA in the symbiotic dinoflagellate genus Symbiodinium. Phycologia 42, 285–291 (2003).
Pochon, X., Putnam, H. M., Burki, F. & Gates, R. D. Identifying and characterizing alternative molecular markers for the symbiotic and free-living dinoflagellate genus Symbiodinium. PLoS ONE 7, e29816 (2012).
Arif, C. et al. Assessing Symbiodinium diversity in scleractinian corals via next-generation sequencing-based genotyping of the ITS2 rDNA region. Mol. Ecol. 23, 4418–4433. https://doi.org/10.1111/mec.12869 (2014).
LaJeunesse, T. C. Diversity and community structure of symbiotic dinoflagellates from Caribbean coral reefs. Mar. Biol. 141, 387–400 (2002).
LaJeunesse, T. C. Investigating the biodiversity, ecology, and phylogeny of endosymbiotic dinoflagellates in the genus Symbiodinium using the ITS region: in search of a “species” level marker. J. Phycol. 37, 866–880 (2001).
Kumar, S., Stecher, G., Li, M., Knyaz, C. & Tamura, K. MEGA X: molecular evolutionary genetics analysis across computing platforms. Mol. Biol. Evol. 35, 1547–1549 (2018).
Cingolani, P. et al. A program for annotating and predicting the effects of single nucleotide polymorphisms, SnpEff: SNPs in the genome of Drosophila melanogaster strain w1118; iso-2; iso-3. Fly 6, 80–92 (2012).
Affymetrix. (Affymetrix, 2007).
R: a language and environment for statistical computing [Online] (R Foundation for Statistical Computing, Vienna, 2017).
Knaus, B. J. & Grünwald, N. J. vcfr: a package to manipulate and visualize variant call format data in R. Mol. Ecol. Resour. 17, 44–53 (2017).
Kamvar, Z. N., Brooks, J. C. & Grünwald, N. J. Novel R tools for analysis of genome-wide population genetic data with emphasis on clonality. Front. Genet. 6, 208 (2015).
Kamvar, Z. N., Tabima, J. F. & Grünwald, N. J. Poppr: an R package for genetic analysis of populations with clonal, partially clonal, and/or sexual reproduction. PeerJ 2, e281 (2014).
Prevosti, A., Ocana, J. & Alonso, G. Distances between populations of Drosophila subobscura, based on chromosome arrangement frequencies. Theor. Appl. Genet. 45, 231–241 (1975).
Zheng, X. et al. A high-performance computing toolset for relatedness and principal component analysis of SNP data. Bioinformatics 28, 3326–3328 (2012).
Alexander, D. H., Novembre, J. & Lange, K. Fast model-based estimation of ancestry in unrelated individuals. Genome Res. 19, 1655–1664 (2009).
Chang, C. C. et al. Second-generation PLINK: rising to the challenge of larger and richer datasets. Gigascience 4, 7 (2015).
Kopelman, N. M., Mayzel, J., Jakobsson, M., Rosenberg, N. A. & Mayrose, I. Clumpak: a program for identifying clustering modes and packaging population structure inferences across K. Mol. Ecol. Resour. 15, 1179–1191 (2015).
Venables, W. & Ripley, B. Modern Applied Statistics with S, 4th edn (Springer, New York, 2002).
Therneau, T. & Atkinson, B. rpart: Recursive Partitioning and Regression Trees. R package version 4.1-15 (2019). https://CRAN.R-project.org/package=rpart.
Milborrow, S. rpart.plot: Plot ‘rpart’ Models: An Enhanced Version of ‘plot.rpart’. R package version 3.0.8 (2019). https://CRAN.R-project.org/package=rpart.plot.
Kuhn, M. Building predictive models in R using the caret package. J. Stat. Softw. 28, 1–26 (2008).
González, M., Rosado-Falcón, O. & Rodríguez, J. D. ssc: Semi-Supervised Classification Methods. R package version 2.1-0 (2019). https://CRAN.R-project.org/package=ssc.
Lirman, D. et al. Growth dynamics of the threatened Caribbean staghorn coral Acropora cervicornis: influence of host genotype, symbiont identity, colony size, and environmental setting. PLoS ONE 9, e107253 (2014).
Funding for this project was supported by NOAA Office for Coastal Management NA17NOS4820083 awarded to IBB and SAK, and NSF OCE-1537959 awarded to IBB, NDF and WM. We are grateful for assistance with sample collection by Zachary Fuller, Mikhail Matz, Stephen Palumbi, Todd LaJeunesse, Jose M. Eirin-Lopez, Katie Flynn, Sea Ventures, Coral Restoration Foundation, The Nature Conservancy, and Fragments of Hope, and sample preparation by Meghann Devlin-Durante and Sam Piorkowski. We thank Sam Vohsen and Eslam Osman for valuable feedback on the Multilocus Genotype tool and Reef Futures 2018 workshop participants for their feedback on the Galaxy CoralSNP analysis environment. We also thank Aki Ohdera for the creation of the database logo. Permits for samples include Florida: CRF permit numbers CRF-2017-009, CRF-2017-012, NOAA FKNMS permit numbers FKNMS-2011-159-A4, FKNMS-2001-009, FKNMS-2014-148-A2, and FKNMS-2010-130-A, Belize: CITES Permit 0385, 7487 and 7488; Curacao: CITES Permit 16US784243/9 and 12US784243/9; Puerto Rico Department of Natural and Environmental Resources permit 2018-000064; and USVI Department of planning and natural resources, Division of fish and wildlife DFW14017T.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Kitchen, S.A., Von Kuster, G., Kuntz, K.L.V. et al. STAGdb: a 30K SNP genotyping array and Science Gateway for Acropora corals and their dinoflagellate symbionts. Sci Rep 10, 12488 (2020). https://doi.org/10.1038/s41598-020-69101-z
The coral symbiont Candidatus Aquarickettsia is variably abundant in threatened Caribbean acroporids and transmitted horizontally
The ISME Journal (2022)
Scientific Reports (2022)
Coral Reefs (2022)