A major challenge in maize (Zea mays) production is to achieve high grain yield (yield hereafter) by improving resource use efficiency. Using a dataset synthesized from 83 peer-reviewed articles, this study mainly investigated the effects of water and/or nitrogen (N) input on maize yield, water productivity (WP), and N use efficiency (NUE); and evaluated the effects caused by planting density, environmental (temperature, soil texture), and managerial factors (water and/or N input). The input of water increased maize yield, WP, and NUE only when the input was less than 314, 709, and 311 mm, respectively; input of N increased maize yield, WP, and NUE until input was greater than 250, 128, and 196 kg ha−1, respectively. Additionally, results of the mixed-effects model and random forest analysis suggested that mean annual temperature (MAT) was the most critical factor for narrowing gaps (between the actual and attainable variable, which was indicated as response ratio of the treatment relative to the control) of yield (RRY), WP (RRWP), and NUE (RRNUE), respectively. Specifically, RRY, RRWP, or RRNUE were negatively correlated to MAT when MAT was higher than 15 °C. Additionally, the structural equation model showed that water input and RRWP with the higher coefficient were more important than N input and RRNUE in improving RRY. These findings provide new insights into the causes and limitations of global maize production and offer some guidances for water and/or N managements.
Considering the rapidly increasing global population and diminishing water and land resources for supporting agricultural production, mankind faces challenges in food security and maintaining ecological sustainability1. Cereal crops are vital sources for sustaining the nutritional/energy need of the global population2. Particularly, maize (Zea mays) is one of the most important cereal crops for supporting the production of ethanol, livestock feed and others food products including starch and syrup3. Consequentially, it is also one of the most commonly grown crops, accounting for 10% of global crop production in the period from 1996 to 20054. Therefore, enhancing maize productivity and resource use efficiency by developing and adopting appropriate managerial practices is important for maintaining global food supply and ecological resilience2.
Water and nitrogen (N) have long been recognized as two major limiting input constraints for maize production5. Water consumption of main cereal crops was expected to increase by 41% from 2000 to 2015 and given current crop water productivity (WP), there will be an increasing demand due to production and global warming6. As a C4 plant, maize typically offers superior WP compared with C3 crops (e.g. alfalfa (Medicago sativa) or wheat (Triticum aestivum)), however, it still consumes greater amount of water due to high biomass production and large evaporation losses during the growing season. Specifically, based on a review of 27 publications across 4 continents, Zwart and Bastiaanssen7 summarized that global average WP for maize was 1.8 kg m−3 with great variability between 1.1 and 2.7 kg m−3. Likewise, the global average N application rate of maize was 80 kg ha−1 yr−1 from 1961 to 20108, and had resulted in an overall low N use efficiency (NUE, < 33%);5. While high water and N saving potentials have also been reported across many global maize production areas9. Thus, there is a strong need for conducting quantitative analysis on actual and potential WP and NUE of maize to better understand crucial managerial practices that could affect its yield, WP, and NUE. In particular, presenting such a study across a wide scale to overcome complex interactions with the environment caused by spatial and temporal heterogeneities. Numerous studies have reported the diminishing contributory effects of either water or N on maize yield increase9,10, however, the critical response thresholds (i.e. water and N) for productivity and major efficiency indices (i.e. WP and NUE) on a cropping system scale were rarely synthesized and remain poorly understood.
Additionally, temperature is extremely important in affecting maize grain yield and resource use efficiency11,12. Temperature affects both the rate and duration of grain growth and influences the persistence and productivity of leaves. For example, maize under an average temperature of 21 °C had greater leaf area duration after silking than that under either 25 °C or 18 °C13. Yield modelling using the scenarios of lowest (RCP2.6) to highest (RCP8.5) emissions indicate that maize will suffer greater yield reductions than wheat, rice (Oryza sativa L.), or soybean (Glycine max L.)14 in response to global warming. The effects of temperature can also be confounded with other environmental/managerial factors (e.g. water stress, or radiation intensity). Tollenaar and Wu15 reported that increased stress tolerance is associated with lower plant-to-plant variability and high-stress tolerance will probably provide the highest potential for yield improvement in maize. Therefore, advanced data analysis methods and factorization techniques are warranted to better understand the role of temperature in regulating the effect of water or N inputs on maize yield, WP, and NUE. To our knowledge, there have been limited attempts to characterize gaps of maize yield, WP, and NUE response to water, and N inputs, and their associated effects on aspects related to temperature.
In addition, based on a previous study using a meta-analysis approach, we identified large gaps between the actual and attainable yield, WP, and NUE on maize production9. Here, we defined the “gap” as the difference between the observed yield, WP, or NUE (actual value) in a given year of a study, and the highest reported yield, WP, or NUE (attainable value) in a given year of a study9,16. Therefore, this study aimed to: i) identify a series of important ecophysiological thresholds of water and/or N inputs on optimizing maize yield, WUE, and NUE; ii) summarize the actual and attainable yield, WP, and NUE in the main maize producing countries; and iii) assess the roles of environmental and management factors on affecting maize yield and resource use efficiency.
Overview of maize yield, WP and NUE
Figure S1 displays maize yield, WP, and NUE across the main maize production areas in the world. The overall mean yield (ranging from 4.6 to 12 t ha−1) was higher than that yield in most countries with exceptions of China (mean ± standard deviation, 8.8 ± 3.3 t ha−1, median = 8.6, n = 800), Croatia (9.6 ± 2.7 t ha−1, median = 10.3, n = 36), Spain (11.1 ± 1.6 t ha−1, median = 11.1, n = 4), and USA (11.1 ± 3.0 t ha−1, median = 11.8, n = 240) (Fig. S2a). Water productivity ranged from 23 to 1077 kg m−3 for all observations (Fig. S2b). WP in China (1.9 ± 0.9 kg m−3, median = 1.8, n = 815), Croatia (1.8 ± 0.6 kg m−3, median = 1.8, n = 36), Turkey (3.5 ± 0.8 kg m−3, median = 3.9, n = 6), and USA (2.3 ± 0.8 kg m−3, median = 2.3, n = 243) were greater than the overall mean WP and all other countries. NUE varied widely (Fig. S2c), NUE in Argentina (100.2 ± 51.3 kg kg−1, median = 91.5, n = 16), Brazil (71.9 ± 34 kg kg−1, median = 62.5, n = 9), Croatia (82.8 ± 26.6 kg kg−1, median = 68.2, n = 24), Nigeria (71.9 ± 11.4 kg kg−1, median = 71.5, n = 28), and USA (84.0 ± 61.7 kg kg-1, median = 68.2, n = 192) were relatively higher than the overall mean NUE.
Pooling data from all countries showed maize yield increased linearly with increasing water input, with 3% of the variation in yield explained when the total water input was less than 314 mm (P < 0.001, Fig. 1a), however, further water input actually declined maize yield (P = 0.04) with 3% of the variation explained. WP decreased linearly with increasing water input with 73% of the variation in WP explained when the total water input was higher than 709 mm (P < 0.001, Fig. 1b), otherwise, WP increased linearly with increasing water input, with 3% of the variation in WP explained (P < 0.001). Conversely, NUE increased linearly with increasing water input, with 7% of the variation in NUE explained when the total water input was less than 311 mm (P < 0.001, Fig. 1c), NUE declined linearly with increasing water input, with 1% of the variation in NUE explained.
Maize yield increased linearly with increasing N input, with 12% of the variation in grain yield explained when the total N input was less than 250 kg ha−1 (P < 0.001, Fig. 1d), and further N input had no effect on maize yield. Similarly, WP increased linearly with increasing N input with 6% of the variation in WP explained when the total N input was less than 128 kg ha−1 (P = 0.06, Fig. 1e), afterwards, WP had no response with increasing N input. Conversely, NUE declined linearly with increasing N input, with 17% of the variation in NUE explained when the total N input was less than 196 kg ha−1 (P < 0.001, Fig. 1f), then NUE declined slightly with increasing N input and 35% of the variation in NUE explained (P < 0.001).
The mixed-effects model suggested that maize yield was positively related to water or N inputs and (P < 0.001, Table 1). However, interactive effects (water × N inputs) had no effects on maize yield (P = 0.80). Also, planting density had a positive effect on maize yield (P < 0.001). Mean annual temperature suggested negative effects on yield (P < 0.001).
Water productivity was negatively related to MAT and water inputs (P < 0.001), and NUE was negatively related to MAT and N inputs (P < 0.001). Both WP (P = 0.02) and NUE (P = 0.01) were positively related to PPH. The interaction of water and N inputs negatively affected both WP (P < 0.001) and NUE (P = 0.03, Table 1). Initial SOC was negatively related to NUE (P = 0.02) but not to WP (P = 0.35).
Input of water and N affects maize yield, WP and NUE
RRY, RRWP, and RRNUE varied widely in Canada, Egypt, Iran, Niger, and Nigeria (Fig. 2). In contrast, RRY, RRWP, and RRNUE in Brazil, Croatia, Australia, and Turkey were relatively smaller than in other countries.
The importance of variables impacting RRY, RRWP and RRNUE are displayed in Fig. 3. Water and N input were the most important factors affecting the gaps between achieved and attainable maize yield, WP, and NUE, and then followed by variables MAT, initial SOC, and soil texture. While PPH played a less important role in influencing RRY, RRWP and RRNUE.
Considering the importance of MAT in affecting maize yield, WP, and NUE (Table 1), and RRY, RRWP and RRNUE (Fig. 3), the relationships between independent variables (i.e., water and N input) and dependent variables (i.e., RRY, RRWP and RRNUE, Figs. 4–6) were determined based on sub-dataset grouped by MAT. For regions where the MAT is less than 15 °C, there was a positive relationship between RRY and water input when the total water input quantity was less than 700 mm (Fig. 4a). There were negative relationships between RRY, RRWP and RRNUE and water input when MAT was higher than 15 °C (Figs. 4–6c). However, some of these quadratic models indicated a poor-fitting to the entire data (R2 = 0.03–0.07).
The RRY, RRWP and RRNUE increased with total N input when the N application rate was less than 300 kg kg−1 (Figs. 4–5d–f), with exception of NUE when MAT is less than 8 °C. Some of these quadratic equations explained a great amount of variation of the regressed data, and R2 ranged from 0.19 to 0.38.
The final SEM model highlighted the importance of management practices (i.e., water and nitrogen input, and PPH) and climate factor (MAT) on improving RRY, RRWP, and RRNUE (Fig. 7). However, water and nitrogen inputs had an opposite effect on RRY and RRWP/RRNUE, and RRWP showed the highest positive effect on RRY.
There are a number of mechanisms illustrating the application of water and/or N could affect plants growth17,18. Crop NUE could be largely controlled by soil water availability by regulating several important processes in the N cycle and affecting N availability and plants uptake10. Hence, a slight increase at the below-threshold water level leads to an increase in yield and NUE, and above-threshold input significantly decreased yield and NUE (Fig. 1a,c). This increase, however, did not increase WP in our study, possibly because water demand of maize typically ranged from 500 to 800 mm19, the breakpoint of WP was 709 (Fig. 1b), and thus more water input is demanded to increase WP considering other water losses such as water evaporation and water runoff in the field. On the other hand, a reasonable supply of N can always enhance WP by promoting plant protein synthesis for supporting growth7,20. Likewise, a below-threshold N input increased yield and WP, while above threshold N input significantly decreased yield and WP (Fig. 1d,e). However, regression results only explained 3–73% of the variations, thereby indicating that there exist other environmental or managerial factors or interactions that affect productivity and NUE16,17. As indicated in this study, climate factor, e.g. MAT, probably play an important role in affecting maize production and resource use efficiency (Table 1). It has long been known that agricultural production is vulnerable to climate change, especially the temperature impacts14. Compiling extensive published results from global grid-based and local point-based models, statistical regressions, and field-warming experiments, Zhao, et al.14 reported that the reduction of yield for each degree Celsius increase in global mean temperature is largest for maize, -7.4 ± 4.5% per degree Celsius.
Temperature can be a universal limiting factor for crop yield21. Temperature increase, particularly night-time high temperature, most likely has negative impacts on cereal grain production14,22. Our study indicates that there is a negative correlation between MAT and yield (Table 1), and the lowest percentage change of yield took place when MAT was greater than 15 °C (Fig. 4a). Additionally, the increased water input decreased the RRY (Fig. 4c), RRWP (Fig. 5c), and RRNUE (Fig. 6c) when MAT was >15 °C. Using boundary-function analysis, a study in the Argentine Pampas region, using data from 30 stations, found that the highest maize yield was observed at moderate MAT, 21.8–23.5 °C23, which agrees with our findings. Maize is a typical C4 plant, however, high MAT leads to physiological stresses resulting in leaf curling, stomatal closure, reduction of CO2 assimilation rate, and shrinkage of the length of the growing cycle24. High temperature, particularly night-time high temperature, could increase crop respiration costs while shortening the grain-fill duration25. In addition, increased temperature enhances soil evaporation and thus water deficits14,26, eventually decreasing maize yields. A study compiling extensive published results from field warming experiments showed that MAT (21–29 °C) negatively affected crop yield of wheat, rice, maize, and soybean at the global scale14, and loss of yield due to the increase of MAT was the highest for maize. More importantly, we suspect that the MAT threshold might be 15 °C9 for maize production. This number is lower than the threshold value identified by a previous study11: 18 °C, which is the optimal temperature for phosphoenolpyruvate carboxylase, known as the primary enzyme in charge of carbon fixation processes in C4 photosynthetic pathway.
Additionally, despite research indicating that high-temperature stresses could be easily confounded with moisture stress27, we found that the increased water input did reduce the gaps between actual and attainable yield in frigid areas (Fig. 4a) but not in thermic temperature areas (Fig. 4c). This is likely that MAP is generally higher, possibly with concurrently low elevation, in thermic temperature areas than that in frigid areas28. In other words, water input from irrigation is the limiting factor of maize yield in low MAP areas instead of high MAP areas29. Varietal changes can be made to assist to preserve the pre-flowering length30 against the shortening effect of warming and compensate for the negative effects of changes in climate (i.e. temperature and radiation)31.
The quadratic meta-regression results indicated that the threshold of efficiently using water and N input for global maize production was around 700 kg m−3 and 300 kg kg−1, respectively, in most cases (Figs. 4–6). However, both inputs of water and N were much greater than the average values in most regions9. These partly explain that the achieved yield, WP and NUE were significantly lower than the optimal values. While adjusting water or N input independently would only optimize productivity and NUE to a certain extent (Fig. 1). High input of either water or N may postpone the phenological development of maize10 due to prolonged vegetative growth stage and delayed maturity. In contrast, treatments with a low irrigation level and reduced N dose could also result in significantly shortened vegetative growth stage and early maturity. Thus, disregarding the MAT subgroup, the responses of yield (Fig. 4b–f), WP (Fig. 5a–b,d–f)), or NUE (Fig. 6a,b,e,f) to the input of water or N typically yield a quadratic relationship. Considering the increase in global mean temperature, our results are critical in assessing future climate impacts on global maize production using models or field-warming experiments. Hence, adaptation strategies, possibly combining earlier sowing dates and selection of longer-season maize cultivars, could be a general approach to optimize yield, and water and N utilization efficiency on a global scale.
Row spacing greatly affects yield per unit land area regardless of crop species32,33. However, it is less important than other factors, such as water and N management, or climate conditions. Using a similar dataset, previous research has reported that the overall mean PPH was 6.9 ± 1.5 plants m−2 9, and Testa, et al.32 suggested that planting density between 7.5 and 10.5 plants m−2 should be appropriate under irrigation and fertilizer conditions. Therefore, if PPH was managed properly in studies used in the current research, then future research should pay more attention to other factors to improve maize yield, and resource use efficiencies.
Due to data quality issues, criteria of data selection used in the current study does not include the interactions with other critical managerial practices, such as mulching and cover cropping practices. Also, many resource input and climatic data used in this study (i.e., nitrogen and/or water input, growing season temperatures) was not stratified according to production phase or developmental stages. Additionally, almost 50% studies used in this study were in China. Thus, interpretation should be made with caution. It is also noteworthy to mention that the Mainland China features a broad array of soil types and climate conditions, thus, the results can still provide a broader scope of interpretation.
Input of either water or N has a significantly positive impact on yield, WP, or NUE of maize. The current study quantified critical thresholds (input of water and N) and MAT impacting production and resource use efficiency for maize production. We found water input and RRWP were more important than N input and RRNUE in improving RRY. Moreover, to achieve the highest yield by optimizing WP and NUE, a MAT value around 15 °C was observed. The results, threshold values (i.e., levels of water and N) and key drivers (i.e., MAT), will be helpful for large-scale modelling effort and improving water and/or N management strategies for maize production in the future. In the meantime, site-specific studies are warranted to verify results of the current study in the future.
Materials and methods
This study used the dataset from our previously published meta-analysis9 with identical data selection criteria and filtering methods. The final analysis was based on 1436 yield observations from 83 studies conducted in 15 countries (Fig. S1). Afterwards, information related to soil property (soil texture, initial soil organic carbon concentration (SOC)), climatic conditions, mean annual precipitation (MAP), and mean annual temperature (MAT), and maize planting density (number of plants per hectare, PPH) were collated from each study. Particularly, the whole dataset was organized according to MAT [frigid (<8 °C), mesic (8–15 °C), or thermic (>15 °C)] MAT regimes34.
Definitions and data analysis
Water productivity (WP, kg m–3) was calculated as grain yield (Y, kg ha−1) divided by the total amount of water (W, rainfall + irrigation, mm) input in crop production20. Nitrogen use efficiency (kg kg−1) was calculated as: NUE = Y/N, where N is the total amount of N fertilizer applied (kg ha−1).
Estimating the mean effects of environmental or managerial factors
The effects of water and N input, MAT, PPH, initial SOC and on maize yield, WP and NUE were assessed using a mixed-effect model via the R package “nlme35”, using soil texture as a random effect factor:
where Y is yield (t ha−1), β1–6 represent variable effects, W represents total water (rainfall + irrigation, mm) input, N represents the total fertilizer N input (kg ha−1), W × N indicates the interaction of water and N input, and error is the residual that was not explained by the independent variables. All independent variables are numeric. Similar analyses were also conducted for WP and NUE.
Additionally, linear regression was conducted to illustrate the effect of water and N input on yield, WP, and NUE. While yield, WP, and NUE were plotted as a function of water and N inputs and fit with a broken-stick linear regression model with a critical limiting value, which can be described with two straight lines that intersect at a threshold value36 using the ‘segmented’ package37. The broken-stick linear regression model was mainly used to identify threshold values at which the effects on response variables reverse as increasing water or N inputs; instead of identifying linear models.
Estimating the factors affecting yield, WP, and NUE
Optimal water and N inputs were defined as ‘the least input levels that produced the highest reported yield in a specific year of a study’9,16. The effect size of below-optimal and above-optimal water and N inputs on yield was calculated using the natural logarithm of the response ratio (RR)38:
where Yobs is the observed yield in a specific year of a study, and Yref is the highest reported yield (reference yield) in a specific year of a study. Likewise, the intensity of below-optimal and above-optimal water and N input on WP and NUE were estimated for each study as:
where WPobs and NUEobs are the observed WP and NUE in a specific year of a study, and WPref and NUEref are the WP and NUE associated with optimal water and N inputs of a specific year of a study.
Using ‘randomForest’ package39, the importance of variables on RRY, RRWP, and RRNUE was estimated. This nonparametric method allowed for the consideration of all observations for assessing the relationship of predictors to the change in response to RRY, RRWP, and RRNUE and various environmental (initial soil organic carbon concentrations, soil texture, and MAT) and management (water and N inputs, and PPH) factors.
Using the ‘metafor’ package40 with the restricted maximum likelihood (RMLE) and the Knapp and Hartung (KH) adjustment, a meta-regression analysis was performed to investigate the linear associations between the RRY, RRWP, RRNUE to water or nitrogen input.
Finally, structural equation model (SEM) was used to disentangle indirect and direct effects of climate (MAT), and management practices (water and N inputs, and PPH) on the RRY, RRWP, and RRNUE using the ‘lavaan’ package41. All data were normalized (to ensure that the data fit a standard normal distribution with a mean of 0 and a standard deviation of 1), and an a priori regression analyses was established based on the known effects and relationships among the variables42. Rather than multiple regressions, SEM can be used to model multiple causal and/or interactive interrelationships among variables, which results in multiple explanatory and/or response variables in one model42. Data were fitted to the models using the maximum likelihood estimation method. The quality of fitting was assessed using the χ2-test, goodness of fit (GIF) index, and root mean squared error of approximation (RMSEA) indices. An accurate model should have no significant differences between the observed and simulated data evaluated using the χ2-test (p > 0.05). Additionally, the model should also provide high GIF (>0.9), low RMSEA (<0.08), and low Akaike information criterion (AIC) values43.
Alexandratos, N. & Bruinsma, J. World agriculture towards 2030/2050: the 2012 revision, http://large.stanford.edu/3174B40D-38BB-4666-9BF0-B83C5A13CC3E/FinalDownload/DownloadId-83BF020A7CB21638499FB8BD241C3D52/3174B40D-38BB-4666-9BF0-B83C5A13CC3E/courses/2014/ph240/yuan2/docs/ap106e.pdf (2012).
Tilman, D., Balzer, C., Hill, J. & Befort, B. L. Global food demand and the sustainable intensification of agriculture. Proc Natl Acad Sci USA 108, 20260–20264, https://doi.org/10.1073/pnas.1116437108 (2011).
Foley, J. It’s time to rethink America’s corn system, https://www.scientificamerican.com/article/time-to-rethink-corn/ (2013).
Mekonnen, M. M. & Hoekstra, A. Y. Water footprint benchmarks for crop production: A first global assessment. Ecological Indicators 46, 214–223, https://doi.org/10.1016/j.ecolind.2014.06.013 (2014).
Raun, W. R. & Johnson, G. V. Improving nitrogen use efficiency for cereal production. Agron J 91, 357–363, https://doi.org/10.2134/agronj1999.00021962009100030001x (1999).
Rosegrant, M. W., Ringler, C. & Zhu, T. Water for agriculture: maintaining food security under growing scarcity. Annul Rev Env Resour 34, 205–222, https://doi.org/10.1146/annurev.environ.030308.090351 (2009).
Zwart, S. J. & Bastiaanssen, W. G. M. Review of measured crop water productivity values for irrigated wheat. rice, cotton and maize. Agric Water Manag 69, 115–133, https://doi.org/10.1016/j.agwat.2004.04.007 (2004).
Ladha, J. K. et al. Global nitrogen budgets in cereals: A 50-year assessment for maize, rice, and wheat production systems. Sci Rep 6, 19355, https://doi.org/10.1038/srep19355 (2016).
Li, Y. et al. A global synthesis of the effect of water and nitrogen input on maize (Zea mays) yield, water productivity and nitrogen use efficiency. Agric For Meteorol 268, 136–145, https://doi.org/10.1016/j.agrformet.2019.01.018 (2019).
Ashraf, U. et al. Maize growth, yield formation and water-nitrogen usage in response to varied irrigation and nitrogen supply under semi-arid climate. Turk J Field Crops 21, 88–96, https://doi.org/10.17557/tjfc.93898 (2016).
Kingston-Smith, A. H., Harbinson, J. & Foyer, C. H. Acclimation of photosynthesis, H2O2 content and antioxidants in maize (Zea mays) grown at sub-optimal temperatures. Plant Cell Environ 22, 1071–1083, https://doi.org/10.1046/j.1365-3040.1999.00469.x (1999).
Allen, D. J. & Ort, D. R. Impacts of chilling temperatures on photosynthesis in warm-climate plants. Trends Plant Sci 6, 36–42, https://doi.org/10.1016/S1360-1385(00)01808-2 (2001).
Wilson, J. H., Clowes, M. S. J. & Allison, J. C. S. Growth and yield of maize at different altitudes in Rhodesia. Ann Appl Biol 73, 77–84, https://doi.org/10.1111/j.1744-7348.1973.tb01311.x (1973).
Zhao, C. et al. Temperature increase reduces global yields of major crops in four independent estimates. Proc Natl Acad Sci USA 114, 9326–9331, https://doi.org/10.1073/pnas.1701762114 (2017).
Tollenaar, M. & Wu, J. Yield improvement in temperate maize is attributable to greater stress tolerance. Crop Sci 39, 1597–1604, https://doi.org/10.2135/cropsci1999.3961597x (1999).
Qin, W., Assinck, F. B. T., Heinen, M. & Oenema, O. Water and nitrogen use efficiencies in citrus production: A meta-analysis. Agric Ecosyst Environ 222, 103–111, https://doi.org/10.1016/j.agee.2016.01.052 (2016).
Hernández, M. et al. Maize water use efficiency and evapotranspiration response to N supply under contrasting soil water availability. Field Crops Res 178, 8–15, https://doi.org/10.1016/j.fcr.2015.03.017 (2015).
Bennett, J. M., Mutti, L. S. M., Rao, P. S. C. & Jones, J. W. Interactive effects of nitrogen and water stresses on biomass accumulation, nitrogen uptake, and seed yield of maize. Field Crops Res 19, 297–311, https://doi.org/10.1016/0378-4290(89)90100-7 (1989).
Critchley, W., Siegert, K. & Chapman, C. A manual for the design and construction of water harvesting schemes for plant production, www.fao.org/docrep/u3160e/u3160e04.htm (1991).
Ragab, R. A note on Water use efficiency and water productivity, http://www.water4crops.org/wp-content/uploads/2014/08/RR_Water-use-efficiency-and-water-productivity.pdf (2012).
van Ittersum, M. K. & Rabbinge, R. Concepts in production ecology for analysis and quantification of agricultural input-output combinations. Field Crops Res 52, 197–208, https://doi.org/10.1016/S0378-4290(97)00037-3 (1997).
Muchow, R. C., Sinclair, T. R. & Bennett, J. M. Temperature and solar radiation effects on potential maize yield across locations. Agron J 82, 338–343, https://doi.org/10.2134/agronj1990.00021962008200020033x (1990).
Andrade, J. F. & Satorre, E. H. Single and double crop systems in the Argentine Pampas: Environmental determinants of annual grain yield. Field Crops Res 177, 137–147, https://doi.org/10.1016/j.fcr.2015.03.008 (2015).
Wang, X. et al. Divergence of climate impacts on maize yield in Northeast China. Agric Ecosyst Environ 196, 51–58, https://doi.org/10.1016/j.agee.2014.06.009 (2014).
Peng, S. et al. Rice yields decline with higher night temperature from global warming. Proc Natl Acad Sci USA 101, 9971–9975, https://doi.org/10.1073/pnas.0403720101 (2004).
Badu-Apraku, B., Hunter, R. B. & Tollenaar, M. Effect of temperature during grain filling on whole plant and grain yield in maize (Zea mays L.). Can J Plant Sci 63, 357–363, https://doi.org/10.4141/cjps83-040 (1983).
Lobell, D. B. et al. Greater sensitivity to drought accompanies maize yield increase in the US Midwest. Science 344, 516–519, https://doi.org/10.1126/science.1251423 (2014).
Johnson, B. G., Verburg, P. S. J. & Arnone, J. A. Effects of climate and vegetation on soil nutrients and chemistry in the Great Basin studied along a latitudinal-elevational climate gradient. Plant Soil 382, 151–163, https://doi.org/10.1007/s11104-014-2144-3 (2014).
Zhang, G. et al. Optimizing water use efficiency and economic return of super high yield spring maize under drip irrigation and plastic mulching in arid areas of China. Field Crops Res 211, 137–146, https://doi.org/10.1016/j.fcr.2017.05.026 (2017).
Egli, D. B. Time and the productivity of agronomic crops and cropping systems. Agron J 103, 743–750, https://doi.org/10.2134/agronj2010.0508 (2011).
Liu, Y., Wang, E., Yang, X. & Wang, J. Contributions of climatic and crop varietal changes to crop production in the North China Plain, since 1980s. Global `Change Biol 16, 2287–2299, https://doi.org/10.1111/j.1365-2486.2009.02077.x (2010).
Testa, G., Reyneri, A. & Blandino, M. Maize grain yield enhancement through high plant density cultivation with different inter-row and intra-row spacings. Eur J Agron 72, 28–37, https://doi.org/10.1016/j.eja.2015.09.006 (2016).
Casal, J. J., Deregibus, V. A. & SÁNchez, R. A. Variations in tiller dynamics and morphology in Lolium multiflorum Lam. vegetative and reproductive plants as affected by differences in red/far-red irradiation. Ann Bot (Lond) 56, 553–559, https://doi.org/10.1093/oxfordjournals.aob.a087040 (1985).
Knorr, M., Frey, S. D. & Curtis, P. S. Nitrogen additions and litter decomposition: A meta‐analysis. Ecology 86, 3252–3257, https://doi.org/10.1890/05-0150 (2005).
Pinheiro, J., Bates, D., DebRoy, S. & Sarkar, D. nlme: linear and nonlinear mixed effects models. R package version 3.1–117, URL: http://cran.rproject.org/web/packages/nlme/index.html (2014).
Sadras, V. O. & Milroy, S. P. Soil-water thresholds for the responses of leaf expansion and gas exchange: A review. Field Crops Res 47, 253–266, https://doi.org/10.1016/0378-4290(96)00014-7 (1996).
Muggeo, V. M. Segmented: an R package to fit regression models with broken-line relationships. R News 8, 20–25 (2008).
Hedges, L. V., Gurevitch, J. & Curtis, P. S. The meta‐analysis of response ratios in experimental ecology. Ecology 80, 1150–1156, https://doi.org/10.1890/0012-9658(1999)080[1150:TMAORR]2.0.CO;2 (1999).
Liaw, A. & Wiener, M. Classification and regression by randomForest. R news 2, 18–22, https://www.r-project.org/doc/Rnews/Rnews_2002-3.pdf (2002).
Viechtbauer, W. Conducting meta-analyses in R with the metafor package. J Stat Softw 36, 1–48 (2010).
Rosseel, Y. Lavaan: An R package for structural equation modeling. J Stat Softw 48, 1–36 (2012).
Grace, J. B. In Structural equation modeling and natural systems (ed. James B. Grace) 324–349 (Cambridge University Press, 2006).
Schermelleh-Engel, K., Moosbrugger, H. & Müller, H. Evaluating the fit of structural equation models: Tests of significance and descriptive goodness-of-fit measures. MPR-online 8, 23–74 (2003).
We thank all researchers whose data were used in this study. This work was jointly supported by the National Natural Science Foundation of China (31802133) and the China Scholarship Council (File no. 201606180104). We are very grateful for the critical reading and revising of the manuscript by Dr. Douglas J. Cattani (University of Manitoba).
The authors declare no competing interests.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Li, Y., Cui, S., Zhang, Z. et al. Determining effects of water and nitrogen input on maize (Zea mays) yield, water- and nitrogen-use efficiency: A global synthesis. Sci Rep 10, 9699 (2020). https://doi.org/10.1038/s41598-020-66613-6
This article is cited by
Exploring the Potential of Biochar and Mulched Drip Irrigation with Plastic Film on Crop Yields in Water-Stressed Regions: a Global Meta-Analysis
Journal of Soil Science and Plant Nutrition (2023)
Distinct enhanced efficiency urea fertilizers differentially influence ammonia volatilization losses and maize yield
Plant and Soil (2022)