Cetuximab Conjugated with Octreotide and Entrapped Calcium Alginate-beads for Targeting Somatostatin Receptors

There is a need to formulate oral cetuximab (CTX) for targeting colorectal cancer, which is reported to express somatostatin receptors (SSTRs). Therefore, coating CTX with a somatostatin analogue such as octreotide (OCT) is beneficial. Alginate was used to coat CTX to facilitate delivery to the gastrointestinal tract (GIT). This study aimed to deliver CTX conjugated with OCT in the form of microparticles as a GIT-targeted SSTR therapy. Both CTX and OCT were conjugated using a solvent evaporation method and the conjugated CTX-OCT was then loaded onto Ca-alginate-beads (CTX-OCT-Alg), which were characterized for drug interactions using differential scanning calorimetry (DSC), and Fourier transform infrared spectra (FTIR). Moreover, the morphology of formulated beads was examined using a scanning electron microscope (SEM). The drug content and release profile were studied using UV spectroscopy. Finally, in vitro cytotoxicity of all compounds was evaluated. The results showed homogenous conjugated CTX-OCT with a diameter of 0.4 mm. DSC showed a delay in the OCT peak that appeared after 200 °C due to small polymer interaction that shifted the OCT peak. Moreover, FTIR showed no prominent interaction. SEM showed clear empty cavities in the plain Ca-alginate-beads, while CTX-OCT-Alg showed occupied beads without cavities. CTX-OCT-Alg had a negligible release in 0.1 N HCl, while the CTX-OCT was completely released after 300 min in phosphate buffer pH 7.4. All formulations showed good antiproliferative activity compared with free drugs. The formulated CTX-OCT-Alg are a promising platform for targeting colorectal cancer through GIT.


Results and discussion
preparation of the conjugated ctX with oct. This study aimed to formulate CTX conjugated with OCT in Ca-alginate-beads using sodium alginate polymer for targeting of SSTRs expressed in colorectal cancer. Due to differences in the solubility of OCT and CTX, CTX was coated with OCT forming a soluble CTX-OCT product. OCT is a water-soluble drug, while CTX is soluble in a mixture of methanol and chloroform, forming a clear rather than a cloudy solution. We found one study which used polyethylene glycol (PEG) as a coating polymer for fluconazole in water to exploit the hydrophilicity of PEG; the fluconazole and PEG reaction was carried out by solvent evaporation to form highly soluble fluconazole 28 . The CTX was converted from a water-insoluble material to highly water-soluble CTX-OCT particles that facilitated the transfer of CTX to the receptor site of SSTRs. Moreover, CTX was measured spectrophotometrically at a wavelength of 360 nm, while OCT was measured at 291 nm. It was previously reported that the CTX absorbance could be measured using a multiwall scanning spectrophotometer at 440 nm 31 , while OCT could be detected at 220 nm 32 . The variance between the published wavelength and our method could be due to the difference in the type of instruments used.
The formed Ca-alginate-beads before and after drying were studied at concentrations of 16,22,35,60, and 82 µM, all of which showed uniform beads before drying. However, after drying the beads were irregular in shape and did not hold their form (Fig. 1a-j). A concentration of 128 µM (30 mL sodium alginate/10 mL water) produced the most well-formed and stable beads before and after drying (Fig. 1k-n). The formed CTX-OCT particles were loaded into Ca-alginate-beads of uniform shape and size, which could be targeted to the GIT in treatment of colorectal cancer.
The encapsulation efficiency of the obtained CTX-OCT-Alg. The encapsulation efficiency of CTX-OCT in the Ca-alginate-beads ranged between 40-65% for the OCT and between 38-56% for the CTX. Table 1 shows the amount (mg) of CTX and OCT loaded in Ca-alginate-beads. The amount of OCT loaded was 4.5 ± 0.56 mg/10 mg OCT-beads, and 5.9 ± 0.61 mg/10 mg in CTX-OCT-beads, respectively. In addition, the amount of CTX loaded was 6.1 ± 0.91 mg/10 mg CTX-beads and 4.1 ± 0.34 mg/10 mg in CTX-OCT-Alg, www.nature.com/scientificreports www.nature.com/scientificreports/ respectively. The amount of CTX and OCT loaded into CTX-OCT-Alg were reasonable as the amount initially used in the formulation was considered to be the saturated solution of CTX-OCT 33 . Size, morphology and swelling determination. The formed beads at a concentration of 128 µM alginate were characterized to determine bead size. The prepared beads were measured at a resolution of 1.5× to determine the diameter of beads on a slide marked with 100-µm squares. The formulated beads were equal to four squares (e,f) dried plain Ca-alginate-beads (35 µM); (g,h) dried plain Ca-alginate-beads (60 µM); (i,j) dried plain Ca-alginate-beads (82 µM); (k,l) dried plain Ca-alginate-beads (128 µM; (m,n) dried CTX-OCT-Alg (128 µM).
in width and height, with a diameter of 0.4 mm (Fig. 2), which was calculated as 4 squares × 100 µm = 400 µm. Another study found that formulated Ca-alginate-beads had diameters that ranged from 700 to 1400 μm 34 . This difference in size was due to the different formulation methods, in this study alginate was dropped into the CaCl 2 solution, whilst the grinded beads showed ranged size of 1-2 µm.
CTX free drug was imaged using SEM and observed to be composed of heterogeneous particles (Fig. 3a,b). However, after conjugation of CTX to OCT, the particles were homogenous (Fig. 3c,d), which confirmed the coating of CTX with OCT. Moreover, plain beads were imaged using at magnifications 35×, 500 µm and 140×, 100 µm. In these images, the powders had empty cavities (Fig. 3e,f). In contrast, Ca-alginate-beads loaded with CTX-OCT powders had turbid and fill cavities, which indicated the physical presence of drug powder (Fig. 3g,h). Another study that used SEM to evaluate alginate bead shape found an irregular shape of sodium alginate before coating, that resolved to a homogenous and uniform shape after coating 28 , which was consistent with our findings (Fig. 3). This indicates that CTX alone does not confer irregular alginate bead structure, but after its conjugation with OCT, the beads take on a uniform and homogenous shape, which serves as an indication that OCT coating of CTX results in uniform structures.
TEM evaluation was used to examine the internal structure and morphology of CTX-OCT-Alg. The beads before milling exhibited irregular shapes with particle sizes <0.4 mm (Fig. 4). The internal structure of the CTX particles had no core (i.e. drug loading/encapsulation efficiency) and therefore, no distinct shape (Fig. 4a). After the CTX was coated with a layer of the stabilizing OCT, the particles were stable and soluble, and the CTX had a visible coating layer of OCT (Fig. 4b). TEM of CTX-OCT-Alg confirmed that CTX-OCT formed complexes and were incorporated inside the beads (Fig. 4c). Similar results were reported by Page et al., who showed vesicle-like shapes inside beads incorporated drugs 35 . entrapment and drug interaction of ctX-oct in ca-alginate-beads. The thermal analysis of sodium alginate showed a broad endothermic peak that began at 145.5 °C, which indicated that the compound was pure. Moreover, the same peak was observed in the physical mixture of CTX-OCT (Fig. 5d). Pure OCT powder produced an endothermic peak at 123 °C that ended at 168 °C, which represented the melting point of OCT (Fig. 5b). The pure CTX drug had an endothermic peak that began at 56 °C and it ended at 91.4 °C; these peaks indicated the melting point of CTX (Fig. 5c). We then analyzed Ca-alginate-beads and observed approximately the same endothermic peak as sodium alginate (Fig. 5a), which indicated no interaction between CTX-OCT conjugate and sodium alginate and indicate the CTX-OCT can be released from Ca-alginate-beads. DSC analysis of CTX-OCT-Alg showed endothermic peaks at 77.71 °C that represented CTX and a delay in the OCT peak that appeared after 200 °C, indicating a slight polymer interaction that shifted the OCT peak from 150 °C to 200 °C, this predicted reaction led us for formulate CTX-OCT (Fig. 5d).
To examine the drug interaction between OCT and CTX, FTIR was used. Absorption bands showed no prominent interaction between the two compounds, and CTX-OCT bead powder had similar absorption bands as their raw powders. Bands between 3000-3600 cm −1 indicated O-H stretching in alginic acid, and OH in OCT. Bands

Beads Sample
Amount of drug (mg) in 10 mg beads ± SD

Octreotide (OCT) Cetuximab (CTX)
Octreotide-beads 4.5 ± 0.56 -Cetuximab-beads -6.1 ± 0.91 Cetuximab-octreotide-beads 5.9 ± 0.61 4.1 ± 0.34 Table 1. Amount of drug loaded into Ca-alginate-beads measured using the wavelengths of octreotide and cetuximab. www.nature.com/scientificreports www.nature.com/scientificreports/ between 1670 and 1460 cm −1 were related to asymmetrical and symmetrical stretching vibrations of carboxylate salt ions in alginate and OCT. C-H stretching was presented at a range of 2955-2870 cm −1 , while C-O stretching of the pyranose ring in alginate and OCT appeared at 1100 cm −1 . Ca-alginate had a narrow O-H band compared to sodium alginate due to a decrease in OH groups from Ca-alginate chelation. The Ca ion substitution of the sodium ion resulted in a change in atomic weight and charge density; thus, asymmetric stretching vibrations were shifted to a lower wavelength (Fig. 6). Moreover, the FTIR studies showed no interaction between the CTX, OCT, www.nature.com/scientificreports www.nature.com/scientificreports/ and alginate, which was consistent with other results that used FTIR to confirm the physical interaction of all components but found no interaction between CTX, OCT and alginate 32,36 .
Alginic acid is an anionic polymer, hence the carboxyl groups are not ionized at a pH lower than the pKa, swelling of Ca-alginate beads is negligible under an acidic condition. Any product release thus mostly is due to   www.nature.com/scientificreports www.nature.com/scientificreports/ the distribution of the medication over the insoluble matrix. Nevertheless the anionic polymer is more ionized and swells under neutral and basic conditions after which drug release is dependent on the beads' swelling 37 . Bead swelling percent in HCl showed that very low change in diameter, which indicated a very low swelling percentage. In contrast, beads in phosphate buffer showed a gradual increase in diameter size, indicating a high swelling percentage ( Table 2).
Release of ctX-oct from ca-alginate-beads. The release of CTX-OCT from Ca-alginate-beads relied on the diffusion of the release medium into the Ca-alginate-beads, swelling and dissolution of the alginate matrix. During the first 60 min in acidic media, none of the formulations released the drug compound. After this initial time, the release rates between the formulations were statistically significant (p < 0.05) in alkaline media, pH 7.4 (Fig. 7). In the alkaline medium, the release of both OCT and CTX was biphasic, in which an initial burst was detected after pH changed, followed by a sustained release pattern. During the first stage after pH change (60-90 min), two superficial mechanisms, swelling and diffusion, control drug release from the beads. During the second phase from 90-300 min, the enlargement of the beads was continuous while did not affect drug release. Comparing the drug release from free and loaded beads, the alginate significantly reduced the release profile of the drug from beads. These results show that the free drugs were completely dissolved in the first 30 min in acidic pH, which justifies the role of alginate as a coat that can significantly increase the targeting and release of drug in GIT.
Once exposed to acidic media, Ca-alginate-beads tend to shrink. The carboxylates of the Ca-alginate-beads are protonated at low pH values (<4), which decreases and shrinks the electrostatic repulsion between these groups 38,39 . In addition, the swelling/bruising curve begins to decline in the somewhat basic PBS environment, implying dissolution or decay 40 . Additional, swelling/bruising of the dried beads was typically due to the hydration of the hydrophilic groups of alginate 41 . In this case, free water penetrates the beads and thus promotes a bigger swelling level, filling the inert pores among the polymer chains while no swelling was observed in acidic media. In the mild alkaline environment of PBS, all preparatory products showed significant swelling levels. In this case, the swelling was associated with the exchange of Ca2+ and ion Na+. 40 .
CTX-OCT's alginate-bead release profile of 0.1 N HCl, pH 1.2 is shown in (Fig. 7), with 5.5% and 18.8% of the drug content discharged, in CTX-loaded and OCT-loaded-beads, respectively after 1 hr. The OCT powder in the acidic medium in comparison showed full release of the drug content after 1 hr. The highest peak of CTX release after 300 minutes was 64.2% and 95.7% of OCT. Zero-Order, First Order, Hixson-Crowell and Higuchi equations were used for the analysis of the separation kinetics and the process of the liberation of drugs from prepared Ca-alginate-beads. Table 3 shows that the release kinetics were better suited to the first-order equation and that the release rates were dependent on concentration. Furthermore, the mechanism by which OCT and   www.nature.com/scientificreports www.nature.com/scientificreports/ CTX were released from the Ca-alginate-beads produced in this study was best suited to the Hixson-Crownell equation. Previous studies reported that the release of drugs from Ca-alginate-beads was best fit to the Higuchi equation 42,43 , which characterized the mechanism of release as diffusion-controlled.
One of the limitations of formulating CTX-OCT in Ca-alginate-beads is the low mechanical stability of the beads, which may enhance the swelling of the alginate polymer and accelerate drug release. Coating Ca-alginate-beads with cationic polymers can overcome this problem low mechanical stability. Our in vitro release results showed that CTX-OCT-Alg have a low drug release rate after 60 min in 0.1 HCl 1.2 pH, while in phosphate buffer pH 7.4, all drug contents were released after 300 min. Results from flurbiprofen loaded Ca-alginate showed less than 5% of the drug content was released after 1 hr 23 , which support our finding that CTX release in 0.1 HCL 1.2 pH was less than 5% of drug content released after 1 h; however, OCT drug released was higher but still less than 20%. CTX-OCT-Alg in phosphate buffer 7.4 revealed a gradual increase of the drug release rate until complete release after 5 h. This finding agrees with the data from theophylline coated by alginate for colon targeting delivery, which had complete drug release after 7 h. This delay in release was attributed to the coating of Ca-alginate-beads with another polymer such as chitosan, which provided more release control compared to our results with CTX-OCT-loaded beads 44 .
The mechanistic pathway of Ca-alginate-beads containing CTX-OCT can interpreted by swelling of Ca-alginate-beads then releasing of CTX-OCT in GIT medium. The CTX-OCT particles can be uptake through receptor activation within a mammalian cell. CTX-OCT can be internalize through endocytic vesicles by both phagocytosis and pinocytosis pathways 45 . Phagocytes are the more favored mechanism which can take up large particles (also, aggregates), or particles with certain ligand such as OCT. Moreover, the non-accepted mechanism for particles internalization in a non-phagocytic mammalian cell is commonly throughout pinocytosis or direct diffusion. Furthermore, particles can be taken up via specific internalization (receptor-mediated) endocytosis or nonspecific endocytosis 45 . The receptor-mediated endocytosis authorizes an introduction of extracellular big molecules (Fig. 8) 46,47 . In this phase, complex membrane micro-domains containing clathrins or caveolin-coated pits shape the plasma membrane 47 . Nevertheless, the precise absorption of nanoparticles through means of surface receptors can be improved either through direct interactions between coated particles and receptors or via nanoparticles ligands [47][48][49] .

Determination of the antiproliferative activity of CTX-OCT formulations. The effects of tested
compounds on human cancer cell lines HCT-116, HepG-2, and MCF-7 were measured and recorded in Table 4. The viability of the cells treated with OCT-alginate and CTX-alginate-beads significantly decreased compared to the free OCT and CTX treatments. This result could be due to the improved solubility of the OCT-alginate and CTX-alginate-beads, which improved cell penetration for both OCT and CTX in all cell lines as the antiproliferative activity for both OCT and CTX were improved 50,51 . For example, the HCT-116 cell line had an IC 50 for OCT-alginate and CTX-alginate-beads of 5.48 µg/mL and 4.38 µg/mL vs 7.92 µg/mL and 5.21 µg/mL for free OCT and CTX, respectively. In addition, HEPG-2 cells showed a distinct reduction in the IC 50 of OCT and CTX-alginate-beads (IC 50 = 5.76 µg/mL and 3.82 µg/mL, respectively) compared to free OCT and CTX (IC 50 = 10.26 µg/mL and 7.32 µg/mL, respectively). However, the outcomes exhibited less cytotoxic activity for CTX-OCT-Alginate-beads paralleled to the OCT-alginate or CTX-alginate-beads in all the tested cell lines 50,51 . These results suggest the coating of CTX with OCT decreased CTX activity by making a barrier layer around the molecules. Furthermore, CTX-OCT-Alginate-beads had the same activity as free CTX and were more active than free OCT. These findings indicate that the Ca-alginate-beads loaded with CTX-OCT can target the specific area in GIT at pH 7.4, allowing CTX-OCT to enter cells that express the SSTRs and then dissociate into OCT and CTX with anti-cancer activity. Importantly, the activities of all formulations were synergistic or similar to the free drugs, indicating that the anti-cancer activity was not affected by the alginate bead coating.

Methodology. Preparation of the conjugated CTX-OCT-Alg. For preparing of Ca-alginate-beads loaded
with CTX-OCT. A stock solution of sodium alginate was prepared by dissolving 2 g sodium alginate powder in 100 mL distilled water with the aid of magnetic stirring at 100 rpm for 1 hr 52 . Six diluted concentrations of sodium alginate were prepared at 16 µM, 22 µM, 35 µM, 60 µM, 82 µM, and 128 µM. For preparing of calcium chloride solution, one hundred milliliters 0.2 M CaCl 2 were prepared by adding 2.22 g to 100 mL water, which was then mixed by the aid of magnetic stirring at 100 rpm for 1 min 52 . Moreover, sodium alginate solution was dropped into CaCl 2 . Each concentration of sodium alginate was dropped into (0.2 M) calcium chloride solution using a 2-mL pipette and mixed with the aid of magnetic stirring at 100 rpm.
The coating of OCT to CTX depends on their solubility difference in aqueous and organic media; CTX can be coated with OCT using the solvent evaporation method 53 for SSRT targeting. OCT is a water-soluble drug, while CTX is solubilized in 1 mL 1:1 methanol and chloroform mixture. Briefly, each drug was separately mixed with a suitable solvent; 30 mg OCT was dissolved in 2.5 mL phosphate buffer and 50 mg CTX was dissolved in 1 mL 1:1 methanol and chloroform. The mixture was left to mix for 4 hr at 100 rpm to evaporate the methanol and chloroform and facilitate the OCT coating of CTX. The reaction produced 8.2 µM CTX that was soluble in water due to being coated with 736 µM OCT (Fig. 9).
preparation of ctX-oct-loaded ca-alginate-beads. The conjugated CTX-OCT solution was mixed with 128 µM sodium alginate and then dropped into 100 ml 0.2 M CaCl 2 using a 2-mL pipette, and stirred at 100 rpm. The obtained beads were loaded with CTX-OCT. The formulated beads were purified by filtration through 90-mm filter paper obtained from Sigma Aldrich (Irvine, UK). Finally, formulated beads were dried in an oven at 40 °C for 4 hr (Fig. 9).

Determination of encapsulation efficiency.
To determine the drug content/encapsulation efficiency of the CTX-OCT-Alg, 10 mg beads were placed in 100 mL phosphate buffer, pH 7.4. The mixture was stirred for 6 hr until all beads dissolved and released the CTX-OCT content. The solution was measured for encapsulation efficiency of CTX-OCT using a UV spectrophotometer (Varian Cary ® 50 UV-Vis Spectrophotometer, Port Melbourne, Australia) at a wavelength of 360 nm, while OCT was measured at 291 nm. Drug content was computed using a calibration curve (R 2 = 0.9998) prepared from CTX-OCT solutions with concentrations ranging 1-6 µg/mL. The drug loading capacity of the Ca-alginate-beads was calculated according to the following equation: Total amount of drug in particle weight of particles taken Drug Loading (%) ( ) 100 = × The actual concentration of obtained CTX-OCT-Alg was determined by a comparison between the concentration of a known standard and the concentration of unknown sample using different diluted concentrations of both CTX and OCT 54 .
Size measurement. The size of CTX-OCT-Alg were assessed with an optical microscope fitted with a stage micrometer using a Leica Ultracut UCT Ultra-microtome (Mannheim, Germany) with the accuracy of 0.5-3 mm. Analysis of prepared beads was performed at a resolution of 1.5× to determine the diameter of beads with each square equal to 100, and then calculated bead diameter by the number of squares occupied 55 . Scanning electron microscopy (SEM). Five milligrams of each empty Ca-alginate and CTX-OCT-Alg were milled into a fine powder with a mortar and pestle. SEM was carried out using a JEOL JSM-550 Scanning Electron Microscope (Jeol, Akishima, Tokyo, Japan) to analyze the superficial morphology of the formulated bead powder. Randomly chosen bead powder samples were placed on the surface double-sided copper conductive tape. The beads were then sputter-coated (Sputter coater, JOEL JFC-1300) with a thin layer of platinum in a vacuum for 55 s at 25 mÅ using a coating unit to make it electrically conductive before imaging in an SEM instrument 56 .

Transmission electron microscopy (TEM).
A transmission electron microscope (TEM) was used to characterize the exterior and interior shape of Ca-alginate-beads particles (FEI Tecnai G2 20 TWIN, USA) that was operated at 200 kV. The point-to-point with the resolution of this microscope was less than 0.25 nm, while the line-to-line resolution was less than 0.10 nm 57 .

Differential scanning calorimetry (DSC).
To study the thermal behavior of CTX, OCT, CTX-OCT, and CTX-OCT-Alg, DSC measurements were conducted using a DSC-60 calorimeter (Shimadzu, Kyoto, Japan) 58 . DSC-60 was used for thermal analysis of CTX-OCT-Alg and their powders, sodium alginate powder and ca-alginate-beads. Exactly 5 mg of CTX-OCT-Alg were placed on aluminum pans and assessed for 27 min at 10 °C per min, and then 5 mg of each raw drug powder was assessed separately under same conditions. The DSC thermogram of conjugated CTX-OCT, sodium alginate and CTX-OCT powder was analyzed to confirm the materials were pure, confirm conjugation, and to identify any drug-polymer interactions.
Fourier-transform infrared spectroscopy (FTIR). FTIR was used to test the compatibility of all components together; therefore, we aimed to detect any drug interaction between the drug and polymer by collecting Swelling percentage. Percentage of swelling was studied by investigating the penetration of HCl or phosphate buffer into CTX-OCT-Alg 55 . Eight beads were tested for their swelling in 50 mL 0.1 HCl for 1 hr followed by 50 mL phosphate buffer for another 3 h. The swelling % was determined and presented as a graph.
In vitro release of ctX-oct-Alg. In a dissolution tester (Validata-Hansen study Chatsworth, Ca, USA), a aliquot of CTX-OCT loaded Ca-alginate-beads equal to 50 mg per medication rotated at 50 rpm. 1 mL sample was withdrawn and substituted by 1 mL of phosphate buffer at predefined times. The CTX and OCT published rates were measured using UV spectroscopy for 360 nm for CTX and 292 nm for OCT, depending on the calibration www.nature.com/scientificreports www.nature.com/scientificreports/ curve 23 . The CTX-OCT-Alg were placed in 50 mL 0.1 N HCl (pH 1.2) for 60 min, then the same beads were filtered and retested in phosphate buffer (pH 7.4) for an additional 210 min. The released CTX-OCT from the beads was analyzed spectrophotometrically at a wavelength of 360 nm for CTX, measured at 291 nm for OCT.
Cytotoxic activity and antiproliferative activity of the formulae. An in vitro cytotoxicity assay of all compounds was evaluated using the method described by Bakr et al. 59 . The study was performed in three human tumor cell lines: Michigan Cancer Foundation-7 (MCF-7), human hepatocellular carcinoma (HepG-2) and colon carcinoma (HCT-116). The cells were cultured with 10% fetal bovine serum in RPMI-1640 solution containing antibiotics (100 units/mL penicillin and 100 μg/mL streptomycin) and seeded in a 96-well plate at 1 × 10 4 cell/well density and cultured at 37 °C, 5% CO 2 , for 48 hr. Cells were loaded with 6.25 and 100 μg/mL of blank ca-alginate beads, OCT only, CTX only, OCT alginate beads, CTX alginate beads and CTX-OCT-Alginate beads, and were incubated for 24 hr. The medium was discarded and cells were fixed in 150 μL/well 10% trichloroacetic acid (TCA) for 1 hr at 4 °C, and subsequently rinsed with water three times. Wells were stained with 70 μL/well 0.4% SRB for 10 min in the dark at 37 °C. The cells were then washed with 1% acetic acid to remove any unbound dye, then air-dried for 24 hr. The dye was solubilized in 50 μL/well 10 mM tris base (PH 7.4) for 5 min on a shaker at 1600 rpm. The optical density (OD) of each well was measured spectroscopically at 570 nm with an ELISA microplate reader (EXL 800 USA). The inhibitory concentration at 50% (IC 50 ) was determined from an exponential curve of viability versus concentration of CTX and OCT. The viabilities were determined by the variable Sigmaplot software (systat software inc) as (A570 of samples/A570 of samples not being treated) × 100 and the amount IC 50 (the concentration required to inhibit cell viability by 50 percent) for each compound. The data were collected and analysed to estimate the cell viability and growth effects of the testing compounds.

conclusions
Targeted drug delivery using specific drug carriers to treat tumors has many benefits including reduction of off-site targets and hence side effects, whilst also reducing the dose of the anticancer agent required for therapeutic response. We have successfully produced peptide-drug conjugates (PDCs) to function as potent drug delivery carriers due to their simplicity, versatility and relatively low cost for the construction of PDCs. In this study, CTX was successfully coated with OCT and loaded into alginate beads (CTX-OCT-Alg). FTIR studies confirmed the physical interaction of all components but found no interaction between CTX, OCT and alginate. The in vitro release results showed that CTX-OCT-Alg had a low drug release rate after 1 h in 0.1 HCl 1.2 pH, while in phosphate buffer pH 7.4, all drug contents were released over 5 h. Our results demonstrate CTX-OCT-Alg beads to have excellent gastro-resistant activity and efficiently deliver anti-cancer drugs to the higher pH environments of the colon with higher antiproliferative activity compared to free drug.