Figure 2 | Scientific Reports

Figure 2

From: Transparent Body-Attachable Multifunctional Pressure, Thermal, and Proximity Sensor and Heater

Figure 2

Process of fabrication of (a) thermal sensor, proximity sensor, and transparent heater based on non-aligned Ni Fs, and (b) pressure sensor based on aligned Ni Fs. (c) Assembly of the thermal, proximity, and pressure sensors, and a transparent heater. Top-view SEM images of (d) non-aligned Ni Fs with tes = 2 s as tep increased from 40 to 100 s (from left to right), and (e) aligned Ni Fs with tes = 100 s as tep increased from 40 to 150 s (from left to right). (f) AFM images of the non-aligned (left) and aligned Ni Fs (middle) with tep = 40 s for both, and the corresponding scanned heights of the non-aligned and aligned Ni Fs along lines 1, 2, and 3 (right).

Back to article page