Figure 5 | Scientific Reports

Figure 5

From: Modeling Electrical Percolation to optimize the Electromechanical Properties of CNT/Polymer Composites in Highly Stretchable Fiber Strain Sensors

Figure 5

(Occhipinti) Experiments on the fiber strain sensor fabricated by the CNT/polymer composite. (a) Experimental setup, (b) a snapshot of fabricated fiber strain sensor, and (c) the relative resistance change curves for two different samples. Cross-sectional SEM images of CNT/polymer composite fiber strain sensors for (d) sample #1 and (e) sample #2.

Back to article page