A major challenge in terrestrial carbon science is identifying atmospheric CO2 source and sink dynamics across numerous timescales1,2,3. Because CO2 efflux (Fsoil) can be the largest and most variable component flux in many ecosystems4, Fsoil drives regional carbon dynamics5,6. Accurate measurements of Fsoil are critical for partitioning net ecosystem CO2 flux (NEE) and modeling local-to-global carbon dynamics4,7,8. Nighttime ecosystem respiration (Reco) can be un-measurable using the eddy covariance (EC) technique because of a lack of turbulence and atmospheric mixing, requiring gap-filling procedures to produce credible sums7. These missing nighttime and all-daytime estimates of Reco are often approximated using an exponential temperature (T)-Reco regression model derived from nighttime EC data and T, which assumes that the diel temperature sensitivity can be fit using an Arrhenius or Q10 model8,9,10. Incorrect daytime Reco confounds NEE partitioning into Reco and gross ecosystem productivity (GEP). Therefore, an incorrect model to estimate Reco leads to greater uncertainty and bias in local-to-global estimates of NEE and its components. Some have suggested that the primary factors limiting our ability to characterize soil carbon metabolism and CO2 efflux include lags and antecedent features of abiotic and biotic drivers associated with above- and belowground processes10,11,12,13,14.

Considerable progress has been made in Fsoil modeling by moving beyond simple temperature response functions (see15) to developing frameworks that account for multiple vegetative cover types or soil microhabitats16,17,18,19 and incorporate the important, but variable, influence of antecedent environmental effects20,21 and biotic inputs14. Still, our limited understanding of abiotic (e.g., environmental) and biotic (e.g., aboveground plant function) interactions constrains robust modeling of Fsoil12,22,23,24. Many studies have shown that Arrhenius15 or Q1025 functions poorly describe temperature dependence of Fsoil – globally, and regardless of ecosystem type. Instead, Fsoil often demonstrates a hysteretic response with temperature11,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42. In a hysteretic relationship, the dependent variable can be at multiple states for a given value of the explanatory variable depending on the system’s history. Here, this means that a model based on a T (the explanatory variable) can give you two different estimates of Fsoil (the dependent variable). How, then, can we expect numerical modeling to capture and appropriately predict rates of this dominant carbon source to the atmosphere, when we know the primary numerical relationship is so flawed? Both biological and physical processes can cause this hysteresis. Biological processes driving Fsoil hysteresis might include patterns of photosynthate allocation12,14,33, physiological upregulation43, phenology13,14, soil water redistribution21,44,45, and dynamic storage and loss of carbon in response to micrometeorology27,36,46,47,48,49,50.

Physical processes contributing to observed decoupling of Fsoil from T include heat transport and gas diffusion through the soil51. For example, hysteresis can increase with soil drying because of decreased thermal diffusivity29,33, or increase with soil wetting because of decreased gas diffusivity52. While a lack of observed T-Fsoil relationships under field conditions does not negate theories of biological or enzymatic temperature dependence23, hysteresis complicates prediction of surface CO2 efflux and requires improved model formulations. Previous efforts to distinguish these physical processes from the influence of biological substrate inputs have been hindered, in part, by the lack of an ability to control meso-scale temperature of a soil column that could differentially regulate these contributing drivers.

The central question we address here is: what is the relative contribution of biotic and abiotic drivers in determining the hysteretic relationship between Fsoil and temperature and how do these contributions vary across environmental gradients of moisture? We explore this question under semiarid conditions with semiarid vegetation. Semiarid regions experience multiple wet-dry transitions that create simultaneous ‘pulses’ of biological activity and alterations to the physical characteristics of the ecosystem45– making them an ideal setting for attempting to detangle these biotic and abiotic drivers. We hypothesized that lag in the delivery of recent photosynthate to soil leads to a hysteretic relationship between Fsoil and temperature and that this lag increases with increased input from the plant (associated with the leaf area and net photosynthetic rates). In fact, previous studies have found this hysteretic relationship to be more prominent under woody plants than under grasses or bare soils33. As such, wetter conditions, which are likely to stimulate photosynthate production and transport, might induce greater hysteresis in the relationship between Fsoil and temperature. The alternate hypothesis is that hysteresis follows the decoupling of soil T relative to Fsoil, not stimulation of Fsoil by photosynthate. As noted by Phillips et al.51, the hysteretic response is likely due to the influence of both of these factors.

How biotic and abiotic drivers modulate patterns of Fsoil in the context of mixed vegetation ecosystems is difficult to assess because of the potential, and variable, role they may play in driving fluxes. Therefore, the objectives of this study were to (i) quantify the response of Fsoil to temperature, soil water content, and leaf-level carbon gain in a suite of controlled mesocosms and (ii) determine the relative influence of abiotic (soil temperature and soil water content) and biotic (photosynthesis) factors on Fsoil rates and the amplitude of any hysteretic response to soil T across a range of moisture conditions. Within each mesocosm, we monitored air temperature, soil temperature, soil moisture, and soil CO2 concentration continuously for two-week periods. At the same time, we measured rates of net photosynthesis of the vegetation to assess aboveground patterns of productivity. Then, we integrated these datasets. Because we wanted to understand the role of vegetative structure in determining the hysteretic relationship between T and Fsoil, we repeated these suites of measurements across mesocosms that contained (i) bare soil, (ii) bunchgrass, (iii) woody plants, or (iv) a mixture of both bunchgrass and woody plants.


Environmental control and mesocosm vegetative development

Tight regulation of soil temperature allowed us to create contrasting treatments in terms of a fluctuating diel pattern in soil temperature (30.88 ± 8.17 °C, representative of natural patterns; Fig. 1a) versus one with near-constant, modulated conditions (29.80 ± 2.43 °C; Fig. 1b). Similarly, precise irrigation yielded significant differences in treatment conditions between well-watered and dry soil moisture states (at 5 cm, 19.91 ± 0.57 versus 6.89 ± 0.37%, respectively).

Figure 1
figure 1

Average diel soil temperatures 5, 20, and 50 cm depths within Ecolabs set to mimic a (a) typical, fluctuating diurnal pattern and (b) relatively constant soil temperatures. Atmospheric CO2 concentrations and diel patterns of air temperature and the timing and intensity of light remained similar between these two treatments.

The two vegetation types utilized here are the grass Bouteloua curtipendula and the woody plant velvet mesquite (Prosopis velutina Woot.), representing fundamentally different growth forms. The grass is shallow-rooted, but produces a dense network of roots that occupy the upper ~30 cm of soil. The woody mesquite utilizes a network of shallow and deeper roots. As such, the grass has a significantly greater mass of fine and coarse roots driving near-surface soil CO2 efflux than does mesquite (p < 0.001; grass and mesquite root biomass averaged 24.15 ± 6.49 and 2.65 ± 1.30 g, respectively; see Supplementary Table 1).

Relationship between diel soil CO2 efflux and soil temperature, soil moisture, and aboveground plant function

Throughout the experiment, we observed the same elliptical shape and clockwise direction in the hysteretic relationship between soil temperature and Fsoil for each vegetation type, regardless of the imposed temperature treatment (Fig. 2). Only the amplitude of hysteresis differed, with higher values associated with mesocosms that contained grasses. Because we experimentally constrained the diel range of temperatures experienced within the “constant” treatment, the X-axis is confined to a 5 °C band, but the range of Fsoil we detected did not change. Soil moisture did not affect general hysteretic patterns (Supplementary Fig. 1). Rates of Fsoil are very low at 20 and 50 cm depths – beyond the primary rooting depths of the plants in this experiment, underscoring a strong influence of vegetation on Fsoil (Supplementary Fig. 2).

Figure 2
figure 2

Average diel soil CO2 efflux plotted against average soil temperature for all biotic treatments within soil temperature treatments. Lights were turned on at 09:30 (represented by a triangle) and shut off at 21:30 (represented by a square). Arrows represent the clockwise hysteresis detected in all situations. Fsoil was estimated from 5 cm depth to the surface. Wet and dry conditions are computed together for each soil temperature treatment.

Differences in vegetation were the only significant driver of variation in the amplitude of the hysteretic relationship between soil temperature and Fsoil (R2 = 0.49; p < 0.001; Fig. 3), and the presence of grasses always increased the hysteresis amplitude. We did not detect any statistical difference between the amplitudes of the hysteresis due to the imposed temperature treatment (Table 1, Fig. 3 top versus bottom panels) or targeted watering conditions (wet versus dry; Fig. 3 left versus right panels, respectively).

Figure 3
figure 3

Adjusted mean of hysteresis amplitude (±standard errors) as a function of soil temperature across temperature treatments (fluctuating versus constant), targeted watering conditions (wet versus dry), and vegetation types. Letters indicate differences (p < 0.05) within each treatment.

Table 1 R2, degrees of freedom, F and p-values for ANOVAs performed on the fitted model for the amplitude of hysteresis as a function of soil temperature, soil moisture and vegetation type. Non-significant interactions are not shown. R2m and R2c stand for marginal and conditional squared-R, respectively.

Average rates of net photosynthesis (Anet) were in most cases greater in the grasses than in the mesquites (Table 2; Fig. 4), although grasses in constant soil temperature and dry conditions did not reach higher photosynthesis levels than mesquites under the same conditions. Though both vegetative forms responded positively to wet versus dry conditions in terms of their average Anet, bunchgrasses were more significantly stimulated by the wet conditions.

Table 2 R2, degrees of freedom, F statistics and p-values for ANOVAs performed on the fitted model for Anet as a function of soil temperature (S.T), soil moisture (S.M) and plant species grown in monoculture (SpS). R2m and R2c stand for marginal and conditional squared-R, respectively.
Figure 4
figure 4

Adjusted mean of Anet (±standard errors) for grasses and mesquites grown in monoculture as a function of soil temperature (soil T) and moisture treatments. Lower case letters indicate differences (p < 0.05). Average is based on Anet measured from 11:30 to 19:30.

When pooling both vegetation types, we detected a significant positive relationship between rates Anet and soil respiration (Fsoil; R2 = 0.29; p < 0.0001) using the simple model: soil CO2 efflux = f (photosynthesis). However, this relationship was largely driven by the high rates of Anet and Fsoil within bunchgrasses (R2 = 0.43; p = 0.0046), as there was no relationship within the mesquite mesocosms (R2 = 0.059; p = 0.3036).

Across all vegetative types, baseline rates of Fsoil explained the most variation in the amplitude of the hysteretic relationship between soil temperature and Fsoil and had the most significant correlation of all potential drivers of the hysteresis (Fig. 5). Volumetric water content (VWC) explained the least amount of variation in the amplitude of the hysteretic relationship between soil temperature and Fsoil, but we still detected a negative correlation when pooling across all vegetative cover types (Fig. 5a). However, when we examined the influence of VWC by species, we found no correlation with the amplitude of the hysteretic relationship (bare soil: R2 = 0.12, p = 0.148; mesquite: R2 = 0.03, p = 0.5496; grass: R2 = 0.03, p = 0.5744; and mixture: R2 = 0.02, p = 0.6344). Rates of Anet, an indirect driver of Fsoil, had the next most significant correlation, but the effect was species specific (Fig. 5b). We found a positive correlation between the hysteresis amplitude and Anet within grass (R2 = 0.29, p = 0.0270), but not within mesquite treatments (R2 = 0.18, p = 0.059). We found that the positive correlation between the hysteresis amplitude and Fsoil was present across all vegetative types - grass (R2 = 0.54, p = 0.0040), mesquite (R2 = 0.49, p = 0.0081) and mixture (R2 = 0.31, p = 0.0031) - but not within bare soil treatments (Fig. 5c).

Figure 5
figure 5

Illustrations of the linkages between the amplitude of hysteresis and (a) volumetric water content (VWC), (b) rates of net photosynthesis (Anet) in monocultures and (c) rates of Fsoil.


Are hysteretic patterns between CO2 efflux and soil temperature driven more by biotic or abiotic properties?

The ways in which biotic and abiotic drivers differentially determine hysteretic patterns between Fsoil and temperature have been difficult to assess because of the potential, yet variable, roles they may play in driving rates of soil CO2 efflux. We used controlled conditions to isolate abiotic from biotic drivers and simultaneously measured rates of aboveground photosynthetic assimilation to infer carbon source dynamics responsible for yielding different rates and temporal patterns of Fsoil. Our results support a more biologically-driven mechanism associated with photosynthate transport in yielding the observed patterns of soil CO2 efflux being out of sync with soil temperature. This assertion is supported by two key findings. First, we found significant and nearly equal amplitudes of clockwise hysteretic behavior between Fsoil and soil temperature whether we allowed diel patterns of soil temperature to follow a typical sinuous curve or we held soil temperatures relatively constant. This finding is contrary to the alternative hypothesis that the hysteretic pattern stems from the differential propagation of heat through the soil profile and CO2 diffusion because we found the same pattern behavior when there was no heat propagation through the soil. Second, we found that the amplitude of hysteresis between Fsoil and soil temperature was most strongly tied to baseline rates of Fsoil, which is strongly driven by the amount of fine root biomass. The majority of the residual relationship is tied to aboveground biological inputs through rates of net photosynthesis.

Others had previously hypothesized this biological driver of the hysteretic behavior based on their documentation of the phenomenon and concurrent measurements of photosynthetic rates, but no study to date had isolated photosynthetic fluxes and abiotic drivers as directly as here. For example, Vargas and Allen31 noted a relationship between Fsoil and soil temperature that resulted in variable rates of photosynthesis in the overstory and understory vegetation under a range of natural conditions. Similarly, Barron-Gafford et al.6 found that the degree of hysteresis was positively correlated with photosynthetic rates of the overstory in a semiarid savanna. Importantly, the hysteresis observed here was greatest in mesocosms occupied by grasses. Previous research has illustrated a very short lag in the time between carbon assimilation until stimulation of Fsoil, ranging from hours50 to ~1 day14,27. These studies, then, would suggest that same-day and day-prior photosynthesis rates were most important in determining current-day Fsoil under bunchgrasses13,14,21. Longer lag times, presumably due to longer phloem transport distance, within mesquite would reduce the correlation between these concurrent fluxes. This may explain the positive correlation we found between Anet and Fsoil for bunchgrass mesocosms, but the decoupling between Anet and Fsoil for mesquite mesocosms in this study.

How do contributions to the hysteretic patterns between CO2 efflux and soil temperature vary across different plant types and environmental gradients?

Rates of net photosynthesis per unit leaf area were greater in the bunchgrasses than in the mesquite. Likewise, total leaf biomass in the bunchgrass mesocosms was six times greater than in the mesquite, and total root biomass in the bunchgrass mesocosms was nine times greater than in the mesquite. Together, these factors would yield significantly greater total photosynthate input into the soils of the mesocosm that contained bunchgrass than those that contained mesquite. This positive relationship between aboveground carbon inputs (rates of net photosynthesis) and Fsoil is expected given that Fsoil is the result of autotrophic and heterotrophic source of soil respiration (as recently summarized by Song et al.36).

Differences in net photosynthetic rates in mesquite and grass tend to depend on moisture conditions, with grass having higher rates under wet conditions and mesquite having similar rates under dry and wet conditions because of the rooting strategies of mesquite that allow for greater access to deep water14,45,53,54. However, these differences in net photosynthetic rates are dependent on the size and age of the woody plant, with smaller mesquites often experiencing significantly lower rates of carbon assimilation than larger individuals53,55,56,57. Thus, the lower photosynthetic rates in mesquite than in bunchgrass found here are in line with previous research, when considering that the mesquites were less than one year old at the time of the experiment.

The small hysteretic pattern between Fsoil and soil temperature within the bare soil mesocosm might be surprising given that there is no vegetation to deliver photosynthetic products. However, previous research has illustrated that in dryland and Mediterranean ecosystems with alkaline soils, there can be a chemical process of carbonate precipitation and dissolution36,58,59,60,61,62,63,64,65,66. The resulting periods of CO2 absorption removal would contribute to a hysteretic pattern between Fsoil and soil temperature because for the same range of temperatures one can detect daytime net CO2 efflux, but nighttime net CO2 influx from the atmosphere due, in part, to strong soil-air temperature gradients. The soils used here, however, contained little inorganic carbon. Even in our more strongly constrained temperature regime, some propagation of temperatures still occurred, and we suggest that it may have affected the small amount microbial activity present and likely drove some of the inorganic processes. As such, the patterns seen in the bare soil treatment likely illustrates the concomitant influence of abiotic and biotic drivers.


The use of precise climatic and soil condition controls allowed us to test whether the hysteretic relationship between Fsoil and soil temperature was mainly driven by abiotic or biotic conditions. We observed a strong influence of biotic factors on hysteretic behaviors. We suggest that the delivery of photosynthate in the soil is a major factor in creating lag in the relationship between soil CO2 efflux and soil temperature. In particular, the high photosynthetic rate and biomass of bunchgrass was associated with higher baseline rates Fsoil and hysteresis amplitudes. Therefore, variation in plant community structure likely has an important regulatory role in governing how Fsoil responds dynamically to climate drivers, with potentially profound impacts on seasonal ecosystem-level respiration rates.


Experimental facility and environmental monitoring

The experiment was conducted at the Ecotron Île-de-France facility (St-Pierre-les-Nemours, France), which houses a suite of highly controllable meso-scale ‘Ecolabs’. Each Ecolab permits the simultaneous manipulation of multiple atmospheric parameters and climatic variables across three individual 13 m3 chamber (see Verdier et al.67 for extensive technical descriptions and Supplementary Methods 1 for pictures). Within each of these chambers, there is a 1 m tall lysimeter with 1 m3 volume in which we placed four separate 60 cm tall mesocosms (0.07 m3 volume). Mesocosms were either left with bare soil or planted with the woody plant velvet mesquite (Prosopis velutina Woot.) only, the grass Bouteloua curtipendula only, or a mixed community of P. velutina and B. curtipendula. In total, six chambers and 24 mesocosm were used. We used a loamy sand-textured basalt with a porosity of 37% and bulk density of 1.5 g cm−3 as our soil matrix. The soil had an inorganic carbon content of 2.30 × 10−5 g g−1, and a pH of 8.18; further details on the soil chemistry are previously reported68,69. P. velutina and B. curtipendula seeds used in this study originated from a site located in the Santa Rita Experimental Range (31.8214°N, 110.8661°W, elevation: 1116 m) south of Tucson, Arizona, USA. This area was historically a grassland, but is now dominated by P. velutina, which covers approximately 35% of the ~2800 m2 study site. Much of the P. velutina understory and intercanopy space consists of a mosaic of bunchgrasses, including B. curtipendula, Eragrostis lehmanniana Nees, Digitaria californica Benth, and B. eriopoda. Mean annual precipitation at this site is 375 mm, with about 50% falling in July-September as part of the North American Monsoon. Scott et al.3 described additional details on the site. We set up an establishment phase of 4 months to allow the plants to grow before the measurements. In mesocosms that include grass, 4 g of seeds were sown. As for mesquites, 30 seeds were initially sown in each mesocosm. After a month, plants were thinned to only three mesquites per mesocosm.

We monitored atmospheric CO2 concentration ([CO2]) using a flow-through loop linking each Ecolab chamber in-line to a gas analyzer (LI-840; LI-COR, Lincoln, Nebraska, USA). Precise control of atmospheric [CO2] was maintained by a solenoid valves that allow for direct injection and by CO2 absorption using soda lime when necessary. We set [CO2] and air relative humidity at 400 ppm and 30%, respectively. Along with measures of air temperature and relative humidity, air samples were measured automatically every 30 seconds, and an average for each chamber within each Ecolab was recorded every 30 minutes. Further, we monitored soil moisture (MAS-1; Decagon Devices Inc., Pullman, WA, USA) and temperature (PT-100) at the near surface (5 cm) and at 20 cm and 50 cm depths within each replicate mesocosm. Again, measurements were conducted every 30 seconds, and we recorded an average for each mesocosm every 30 minutes. We delivered light by an overhead plasma lamp (Lumixo-A, Spectrum AM 1.5, Bulb M46, Lumartix, Aubonne, Switzerland) with a 12-hour day length that was set to occur between 09:30 and 21:30 local time.

Experimental design controlling above and belowground temperatures and soil moisture conditions

We independently controlled above- and belowground temperatures, systematically targeting the role of abiotic versus biotic drivers of hysteretic patterns in Fsoil. We repeated the following pair of environmental cycles under wet and dry soil moisture conditions: (i) a pattern of diel aboveground and soil temperature cycles, which mimics natural conditions of the home field site and serves as a control treatment and (ii) a pattern of diel cycle aboveground temperature but constant soil temperature. This treatment constrains vertical soil temperature gradients, a primary hypothesized abiotic driver of the hysteretic relationship between Fsoil and soil T, while mimicking natural aboveground conditions. To reduce the amplitude of temperature variation at the surface, pipes surrounding the mesocosm surface were filled with an antifreeze liquid either to heat-up or to cool-down the system. The surface of the lysimeter was constantly maintained at 33 °C, and the bottom of the mesocosm was allowed to stabilize through heat transfer. In constant soil temperature conditions, soil cooling occurred during the daytime, whereas warming occurred during nighttime, leading to desynchronized light patterns, air temperature, and soil temperature patterns. To simulate wet conditions, mesocosms received 5 mm of tap water twice a week using a dripping irrigation system that allowed for a slow release of water into the soil. We did not add any water during the ‘dry’ treatments to achieve dry soil moisture conditions. In order to dampen potential legacy effects of individual treatments through time experience for each of the mesocosms, we (i) randomized the timing of each treatment for each mesocosm, (ii) introduced a transition period of one week between each treatment in which the mesocosm went through the new soil moisture and soil temperature settings to allow for acclimation to the new conditions, and (iii) we ran each treatment for a two-week period. This experimental plan yielded a split-plot, repeated-measures design, allowing us to independently test for biotic versus abiotic (temperature and moisture) drivers of hysteretic behavior. The experiment lasted 7 months (4 months of establishment phase and 3 months of measurements).

Continuous estimates of soil CO2 efflux

Building on the methods described by Barron-Gafford et al.6, we calculated Fsoil in 30 minute increments using continuously operating solid-state CO2 sensors (GM222, Vaisala, Helsinki, Finland). Tang et al.70 provide a thorough description of the sensors operation. Briefly, each CO2 sensor is managed by a datalogger via a multiplexer. Holes on the bottom surface of the sensor allow CO2 to diffuse three-dimensionally through a membrane surrounding the probe. As described in detail by Pangle et al.69, we extracted discrete samples of the soil gas phase through gas-sampling tubes installed in the soil at three depths of 5, 20, and 50 cm. These tubes were constructed from 0.5-m length and 0.0064-m diameter microporous Teflon tubing with pore sizes ranging from 10 to 35 µm (Parker 1 103-0125031-NT-1000, Controlled Motion Solutions). That tubing was connected to non-porous tubing, sealed together with epoxy and heat shrink tubing. Gas-phase sampling was accomplished by using a flow-through loop linked in-line to a sealed CO2 probe housing (GMK220, Vaisala, Helsinki, Finland) with a GM222 probe inside. [CO2] at each depth was measured for two-minute-period every 20 minutes. The probe was flushed between each measurement. [CO2] readings were corrected for temperature and pressure using data collected by co-located sensors.

Fsoil was calculated according to the “gradient method” using Fick’s first law of diffusion27,30,31,32,33,49,52,70,71,72, as modified by Sanchez-Cañete et al.19. In previous studies6,39,52, the daily degree of hysteresis was calculated as the difference between maximum and minimum Fsoil for the daily median temperature. In our experiment, the presence of a near-constant soil temperature treatment makes the use of daily median temperatures less useful. We calculated instead a daily, microhabitat-specific amplitude of hysteresis as the difference between maximum and minimum Fsoil for the entire day.

Leaf-level measurements of photosynthetic activity

Rates of photosynthetic CO2 assimilation (Anet) were measured on twelve P. velutina and twelve B. curtipendula individuals using a portable gas-exchange system (LI-6400; LI-COR, Lincoln, Nebraska, USA), which allows the user to create a stable microenvironment inside the cuvette that mimics ambient conditions outside. Following the procedures described by Barron-Gafford et al.73, Anet measurements were made continuously for a 24-hour period with the 12-hour day length. We used the LI-6400 red-blue light source (LI-6400-02b) to mimic the local levels of irradiance. Once sealed into the chamber, the leaf was acclimated to a CO2 setpoint of 400 ppm, the ambient air temperature, the ambient relative humidity, and a constant flow rate of 700 µmol s−1. Leaves placed into the cuvette were allowed to acclimate to current conditions and stabilize for a minimum of 30 minutes prior to the first gas exchange measurements. The portable photosynthesis system was then set on an auto-log procedure to match current temperature and relative humidity levels, acclimate the leaf, match the internal infrared gas analyzers, and log Anet upon reaching a steady value every 30 minutes. Within each species, all measures were conducted on intact leaves of similar size; we selected leaves of like age – the most recent, fully unfurled leaf. This procedure for measurements of rates of Anet was repeated across both temperature treatments and both wet and dry soil conditions for the three vegetated mesocosms to capture a spectrum of physiological activity, for a total of 72 individual diel measurements. Leaves were cut after each measurement to be scanned. Their area was determined using the Image J software (Schneider, Rasband & Eliceiri, 2012), allowing to calculate Anet per surface area.

Statistical analysis

Data analyses were performed using the R statistical software (version 3.5.1; R Core Team, 2018). Mixed effect linear models were fitted to analyse the effects of the treatments on the hysteresis amplitude and Anet (nlme package; Pinheiro et al. 2015). The data fulfilled the heteroscedasticity and normality conditions necessary to fit linear models. The experimental cells were considered as random factors in both models. The models were simplified based on the Akaike Information Criterion. For the analysis of hysteresis amplitude, the soil temperature treatments (fluctuating vs. constant), the soil moisture treatments (wet vs. dry) and the vegetation type (mesquite, grass, mixture, or bare soil) were defined as fixed factors. The model fitted for the Anet analysis was similar, but instead of considering 4 vegetation types, we considered only mesquite and bunchgrass. In order to focus on the general effect of plant species, only monocultures were taken into account for Anet. We used the Anet values from 11:30 to 19:30 to ensure we covered most of the daily patterns. To take into account that ecosystem functioning could change over time, the different ‘two week periods’ of measurements were included as fixed factors in models. Post-hoc pairwise comparisons were calculated from the models using the adjusted mean and Tukey-Kramer method (lsmeans package; Lenth 2018). The r.squaredGLMM function (MuMIn package; Barton 2018) was used to calculate marginal and conditional model R2 such as obtaining the part of variance explained by fixed factors and random effect, respectively (Nakagawa & Schielzeth, 2013).

To analyse how the hysteresis amplitude was affected by soil water content, Anet and Fsoil, person correlation analysis was used to calculate correlation coefficients. Because there is a single hysteresis amplitude value per day, we selected the value of volumetric water content, Anet and Fsoil at mid-day (15:30) to test the correlation.