Fluorescent dyes offer great potential as both diagnostic and therapeutic agents, and the combined application has been termed “theranostics”. These compounds can be used to improve cancer diagnoses, assist with image-guided surgery, and treat tumors by photodynamic therapy (PDT). Ideal theranostic agents localize in tumors and become activated by a specific wavelength of light to either emit a different wavelength of light that can be detected for imaging, or generate reactive species for PDT1,2. PDT provides double selectivity through the use of both the dye and light, with the goal of minimizing side effects from the dye or light alone3. To realize the full potential of fluorescent dyes in biomedical applications, it is necessary to increase their brightness and tissue penetration in order to detect and treat deeply-embedded tumors, while also eliminating unwanted side effects.

Fluorescent dyes that absorb and emit in the near-infrared (NIR) range offer several advantages for both PDT and in vivo imaging applications. While visible light (400–650 nm) travels only millimeters in tissues, NIR light (650–1200 nm) can travel centimeters4: 810 nm and 980 nm NIR light have been shown to penetrate 3 cm of skin, skull, and brain tissue5. Additionally, visible light absorbance by endogenous biological fluorophores such as heme and flavin groups6 causes autofluorescence and weak signal intensity. On the other hand, NIR light is minimally absorbed by biological material, drastically reducing background noise and increasing penetrance7,8. FDA-approved NIR-responsive fluorescent dyes including indocyanine green, 5-aminolevulinic acid, and methylene blue are available and used in medical diagnostics9, but are limited due to their low level of brightness. Other commercially available NIR-responsive fluorescent dyes include heptamethine cyanine (Cy7), Alexa Fluor 750, and heptamethine dye IR-80810,11,12. However, these dyes display low brightness, high toxicity, and poor aqueous stability13. Recent PDT-based nanocrystals show energy level tunability via surface ligand modification but have poor biocompatibility due to heavy elements and minute absorbance in the NIR range that stem from a lack of oscillator strength near their bandgap. For example, semiconductor nanocrystals have absorption coefficients of ~103/cm for PbS and PbSe compared to ~106/cm for cyanines with bandgaps around 850 nm – this translates to 1000 times less absorption per nanometer of material by nanocrystals (Supplementary Figure S1).

Fluorescent organic salts, composed of a fluorescent ion and a counterion, have been developed to increase aqueous solubility and photostability14,15. The counterion has largely been thought to have little impact on the properties of the fluorescent organic salts. Only a few reports have investigated the impact of the counterion, but have been limited to encapsulated matrices for modestly increasing the quantum yield16,17,18,19, or have shown no impact on toxicity20,21. The latter study investigated two anions with a visible rhodamine dye, but showed no significant difference in cell viability between the two key anions in a range of cell lines (Hs578Bst, Hs578T, and MDA-MB-231) and did not investigate phototoxicity20. Here, we focus on NIR-responsive polymethine cyanine dyes, which have been used as effective theranostic agents10,22. Heterocyclic polymethine cyanine dyes have been found to preferentially accumulate in tumors and circulating cancer cells23 even in the absence of bioconjugation to tumor-targeting molecules. This is thought to occur through a mechanism mediated by increased expression of organic anion transporter peptides (OATPs) and hypoxia-inducible factor 1-alpha (HIF1α), both of which are upregulated in cancer cells24. HIF1α promotes tumor angiogenesis and expression of OATPs, which facilitate the uptake of polymethine cyanine dyes25, as shown by competitive inhibition of OATP1B322. Lipophilic photosensitizers may also associate into circulating low-density lipoproteins (LDLs) and be imported by cells via ATP-mediated endocytosis26. Charged molecules taken up by the cell accumulate in negatively charged organelles such as mitochondria and lysosomes, where light irradiation can induce generation of reactive oxygen species (ROS)27. While the exact mode of uptake and localization varies depending on the chemical characteristics of any given photosensitizer, these mechanisms are uniquely active in tumor cells, leading to tumor-specific accumulation and retention28.

Cellular toxicity of fluorescent molecules is caused by the combination of: (1) cytotoxicity – toxicity in the dark, independent of photoexcitation; and (2) phototoxicity – toxicity with light illumination, or photoexcitation. While the tumor-specific accumulation of polymethine cyanine dyes reduces their nonspecific toxicity, low levels of systemic toxicity remain due to the cytotoxicity of unexcited molecules28. For applications in tumor imaging, both cytotoxicity and phototoxicity need to be eliminated to minimize side effects. For applications in PDT, cytotoxicity must be eliminated, while phototoxicity should be enhanced to selectively kill cancer cells with targeted light therapy.

We recently reported that a range of weakly coordinating anions can modulate frontier molecular orbital levels of a photoactive heptamethine cyanine cation (Cy+) in solar cells without changing the bandgap29,30. Thus, we are able to control the electronics (i.e. frontier molecular orbitals) of photoactive molecules independently from their optical properties (i.e. bandgaps). We have subsequently employed this electronic tunability to demonstrate cyanine-based organic salt photovoltaics with >7 year lifetime under typical solar illumination31.

Here, we demonstrate the impact of the counterion on independently controlling both cytotoxicity and phototoxicity of fluorescent organic salts in cancer cells for enhanced imaging and improved PDT (Fig. 1A). We achieve this by pairing the NIR-absorbing Cy+ with various dipole-modulating counterions, and characterizing their effect on human lung carcinoma and metastatic human melanoma cell lines. We find that counterion pairings with small hard anions lead to high cytotoxicity even at low concentrations. In comparison, counterion pairings with bulkier, halogenated anions can remain nontoxic even at 20x higher concentrations. We further report a distinct intermediate group of anion pairings that are highly phototoxic, but exhibit negligible cytotoxicity, making them ideal photosensitizers for PDT. This concept of tuning the cytotoxicity and phototoxicity of fluorescent organic salts is a new platform for controlling the photoexcited interactions at the cellular level. It opens new opportunities for greater tissue penetration and the potential for minimizing side effects. Moreover, this approach may be applied to both novel and existing luminophores, including assembled fluorescent probes, phosphors, nanocrystals, and other hybrid nanoparticles32,33,34,35,36.

Figure 1
figure 1

Pairing a fluorescent cation such as heptamethine cyanine (Cy+) with varying counterions enables tunability in cellular toxicity through optoelectronic control to improve near-infrared (NIR) imaging and photodynamic therapy. (A) Anions on the left are generally cytotoxic, anions in the middle are selectively phototoxic and ideal for applications in photodynamic therapy, and anions on the right reduce toxicity for applications in fluorescence imaging. Anions: Iodide (I); hexafluoroantimonate (SbF6); hexafluorophosphate (PF6); o-carborane (CB); tetrakis(4-fluorophenyl)borate (FPhB); cobalticarborane (CoCB); tetrakis (pentafluorophenyl) borate (TPFB); tetrakis[3,5-bis(trifluoro methyl)phenyl]borate (TFM); Δ-tris(tetrachloro-1,2-benzene diolato) phosphate(V) (TRIS). (B) The counterion shifts the HOMO energy level while allowing the band gap to remain the same. Ultraviolet photoelectron spectroscopy (UPS) was used to measure the frontier energy levels of Cy+ with indicated counterion pairings in the solid state. Data were extracted from Suddard et al.29 and Traverse et al.31. (C) Fluorescent organic salts aggregate in aqueous environments. Organic salts fully dissolved in DMSO have a clear maximum at 830 nm with a leading shoulder when characterized with UV-Vis spectroscopy. However, in aqueous solution combinations of H- and J-aggregation of organic salts can be seen by blue-shifted peaks (lower wavelength) and red-shifted peaks (higher wavelength), respectively.


Characterization of fluorescent organic salts

Heptamethine cyanine cation (Cy+; Fig. 1A) is a photoactive cation that absorbs and emits in NIR wavelengths, with a bandgap of 1.3 eV (Fig. 1B). A range of anions were tested with Cy+ and Cy7+ based on our previous studies that demonstrated a full range of valence energy levels tailored by over 1 eV29,31. These include: hard anions iodide (I), hexafluoroantimonate (SbF6), and hexafluorophosphate (PF6), o-carborane (CB); and bulkier soft anions tetrakis(4-fluorophenyl)borate (FPhB), cobalticarborane (CoCB), tetrakis (pentafluorophenyl) borate (TPFB), tetrakis[3,5-bis(trifluoro methyl)phenyl]borate (TFM), and Δ-tris(tetrachloro-1,2-benzene diolato) phosphate(V) (referred to as Δ-TRISPHAT, further abbreviated as TRIS) (Supplementary Figure S2). The counterion causes distinct shifts in the highest occupied molecular orbital (HOMO) energy levels of heptamethine cyanine salts without changing the size of the bandgap in the solid state (Fig. 1B). These changes to energy level are found to be consistent for salt nanoparticles in aqueous solution by measuring shifts to the redox potential and zeta potential (Supplementary Figure S3A,B, Supplementary Table S1), both of which have been correlated to HOMO37,38. The optical properties of the different ion-counterion pairings remain the same, with equivalent quantum yields and absorbance/emission spectra (Fig. 1C, Supplementary Figure S4, Supplementary Table S2). In DMSO, fully dissolved salt monomers display a major peak at 833 nm and a minor shoulder at 764 nm (and no observable shifts in redox potential between various salts as shown in Supplementary Figure S3C,D). Organic salt nanoparticles were formed by diluting these solutions in mixtures of DMSO:H2O. All of the organic salts formed soluble nanoparticles with this approach, which is expected due to their similar solubilities in water (Fig. 1C, Supplementary Table S3). In aqueous solution, the nanoparticles exhibit distinct peak broadening from the major peak and the minor shoulder. The hypsochromic shift of the 764 nm shoulder peak and a bathochromic shift of the 833 nm peak are indicative of both H- and J-aggregation during the nanoparticle formation process. Nanoparticle organization limits the availability for exchange of the ions and preserves salt composition. Nanoparticle size of a typical bulky pairing (CyTPFB) was characterized by small-angle X-ray scattering (SAXS): the mean particle size is 4.1 ± 0.6 nm (Supplementary Figure S5A), a size that is easily taken up by cells39. This data was corroborated using scanning electron microscopy (SEM) (Supplementary Figure S5B). Additional nanoparticle size distributions were measured using SEM, and all counterion pairings display similar nanoparticle sizes ranging from 5 to 9 nm (Supplementary Figure S5C–I). Lifetime experiments confirmed that nanoparticle formation remains stable, with no sign of decomposition into monomers for at least 22 days. The nanoparticles also demonstrated colloidal stability, showing no signs of sedimentation or aggregation over the same period (Supplementary Figure S6).

Tunable cellular toxicity

Human lung carcinoma (A549) and metastatic human melanoma (WM1158) cell lines were used as representative models of two distinct cancer types with increased expression of OATP1B1 and OATP1B340,41 but have limited treatment options. Cells were treated with multiple Cy+-anion pairings by diluting organic salts with cell media to generate self-forming nanoparticles. Cells were incubated with various concentrations of the salt nanoparticles with or without 850 nm light to assess cytotoxicity in the dark and phototoxicity with 850 nm irradiation. Cell viability assays show that Cy+ is cytotoxic at 1 μM for A549 cells even without exposure to NIR light when paired with small hard anions such as I, SbF6, or PF6, and only slightly more phototoxic when exposed to light (Fig. 2A). In contrast, pairings with anions such as FPhB and CoCB have little cytotoxicity for concentrations below 7.5 µM but are already highly phototoxic at 5.0 µM and 5.5 µM, respectively (Fig. 2B). The combination of low cytotoxicity and high phototoxicity is ideal for photosensitizers in PDT. This starkly contrasts to reports that the anion has no impact on dark cytotoxicity in breast cancer cells when paired with a larger bandgap fluorophore20. On the other hand, Cy+ is found to be nontoxic when paired with TPFB, TFM, and TRIS. These pairings display negligible cytotoxicity and only modest phototoxicity at much higher concentrations of >15 μM (TPFB), >20 μM (TFM), and >30 μM (TRIS), making them more ideal for imaging applications (Fig. 2C). Both cytotoxicity and phototoxicity are shown to be dose-dependent for all ion pairings tested, with the exception of TRIS, which displayed no cytotoxicity in the concentrations tested up to 100 μM (Fig. 2C; Supplementary Table S4). The dose-dependent response observed in A549 cells is also consistent in WM1158 cells (Supplementary Figure S7).

Figure 2
figure 2

Organic salts with tunable toxicity can be used to target human cancer cells. Toxicity of photoactive cation heptamethine cyanine (Cy+) is tuned with anion pairing. Human lung cancer A549 cells were incubated with various concentrations of Cy+ with different anionic pairings with or without NIR (850 nm) excitation. Cell viability was determined on day 4 by trypan blue staining and cell counting. (A) In A549 cells, CyI, CySbF6, CyPF6, and CyCB (red/orange) are toxic at low concentrations (1 μM), and cell death occurs independent of light excitation (cytotoxic). (B) CyFPhB and CyCoCB (yellow/green) do not display significant toxicity without light activation, but when photoexcited they induce significant cell death (phototoxic). (C) CyTPFB, CyTFM, and CyTRIS (blue) display low toxicity with and without light (nontoxic). Data are displayed as means ± S.E.M., n = 3.

Mechanism of toxicity

To determine the mechanism of the observed tunability in cytotoxicity and phototoxicity, we investigated salt localization within the cell, which can influence the types of ROS generated and their impact on the cell. Colocalization analysis was done in A549 cells incubated with CyPF6 (Fig. 3A) and stained with a DNA stain, Hoechst (Ho; Fig. 3B), and a mitochondrial stain, Rhodamine 123 (Rho123; Fig. 3C). Colocalization was observed for CyPF6 and mitochondrial tracker Rho123, but not with DNA-specific Ho (Fig. 3D). This indicates that the salts preferentially localize in the mitochondria, which is expected due to the positive charge of Cy+. Some of the salts that do not colocalize with Rho123 could potentially be found within lysosomes, another negatively charged organelle within the cell. Similar results were observed with CyFPhB and CyTPFB (Supplementary Figure S8, Supplementary Table S5).

Figure 3
figure 3

Fluorescent organic salts preferentially accumulate in the mitochondria and lysosomes of cells. A549 cells were treated with 1 μM CyPF6. (A) CyPF6 staining. (B) DNA staining using 2′-[4-ethoxyphenyl]−5-[4-methyl-1-piperazinyl]−2,5′-bi-1H-benzimidazole trihydrochloride trihydrate (Hoechst). (C) Mitochondrial staining using Rhodamine 123 (Rho123). (D) Superimposed CyPF6 + Hoechst + Rho123 staining. Scale bar = 20 µm (100x).

The mechanism of tunability was further studied by oxidative stress analysis using ROS sensitive probes. MitoSOX was used to measure mitochondrial superoxide, and chloromethyl-2′, 7′-dichlorodihydrofluorescein diacetate (Cm-H2DCFDA) was used to analyze general cytoplasmic ROS levels in cells treated with phototoxic levels of organic salts (Fig. 4). We found that an increase in mitochondrial superoxide is directly correlated with both cytotoxicity and phototoxicity of organic salts. Cytotoxic CyPF6 generates superoxide with or without light; phototoxic (but not cytotoxic) CyFPhB photo-generates superoxide only with illumination; and nontoxic CyTPFB generates minimal superoxide even with illumination at high concentrations. No cytoplasmic ROS was detected using general cytoplasmic ROS probe Cm-H2DCFDA (Fig. 4). This data demonstrates that the toxicity of organic salts is caused by localized generation of superoxide within the mitochondria. Mitochondrial superoxide is known to mediate apoptosis through oxidative damage of mitochondrial DNA, hyperpolarization of the mitochondrial membrane potential, and protein modifications leading to the opening of the mitochondrial permeability transition pore42. A key difference in cells treated with CyPF6 is the presence of mitochondrial ROS even without light excitation. This is likely due to the stability of nanoparticles: UV-Vis spectroscopy showed that while pairings with small, hard anions (CyI, CySbF6, and CyPF6,) can form nanoparticles in aqueous solution (Fig. 1C), they do not form nanoparticles in cell media containing fetal bovine serum (Supplementary Figure S9). Pairings with bulkier halogenated anion pairings formed stable and soluble nanoparticles even in cell media containing fetal bovine serum. Lack of nanoparticle formation may lead to cytotoxic species, which are toxic even without light activation because they are more likely to interfere with mitochondrial electron transport chain complexes, a process known to generate ROS. In contrast, stable nanoparticles with average sizes of <20 nm are still able to enter the cell39, but size limitations likely restrict their ability to directly interact and inhibit protein complexes in the mitochondrial membrane.

Figure 4
figure 4

Fluorescent organic salts generate mitochondrial superoxide. MitoSOX was used to measure mitochondrial superoxide, and H2DCFDA for general cytoplasmic ROS in A549 cells treated with organic salts at indicated phototoxic concentrations over 4 days. Phototoxic concentrations were determined from the data in Fig. 1. This data confirms that CyPF6 is cytotoxic, catalyzing superoxide with or without light; CyFPhB is phototoxic but not cytotoxic, photo-generating superoxide only with illumination; and CyTPFB is nontoxic, generating minimal superoxide even with light at high concentrations (*P ≤ 0.05). Data are displayed as means ± S.D., n = 3.

To determine whether the counterion affects cellular uptake of organic salts, intracellular levels of different Cy+-anion pairings were measured by high performance liquid chromatography-mass spectrometry (HPLC-MS). No correlation was observed between toxicity and the intracellular concentration of organic salts (Supplementary Figure S10A). This demonstrates that differential anion-mediated uptake is not the cause of the observed modulation in toxicity, even if it is possible that nanoparticle size may be altered upon cellular uptake. In fact, it appears that the opposite may be true: Cy+ anion pairings with lower cytotoxicity generally had higher intracellular concentrations. However, it should be noted that toxic salts that induce cell death are more likely to rupture and release dyes, potentially decreasing the observed intracellular concentrations.

Furthermore, we found that the anions themselves are not toxic: addition of a phototoxic anion such as I paired with a non-fluorescent cation such as potassium (K+) is neither cytotoxic nor phototoxic (Supplementary Figure S10B). Non-cytotoxic anion-cation pairings cannot be made more toxic by addition of toxic anion salts; for example, a nontoxic salt (CyTRIS) does not become cytotoxic or phototoxic by addition of a toxic precursor salt (KI; Supplementary Figure S10B). However, when the reverse experiment was done and a toxic salt (CyPF6) was supplemented with a nontoxic precursor salt (KTPFB), toxicity was mitigated (Supplementary Figure S10C). This is likely due to variance in nanoparticle stability in cellular environments: in cell media, nanoparticles become less stable when Cy+ is paired with small, hard anions (I, SbF6, and PF6), while nanoparticles remain stable when Cy+ is paired with bulkier anions (FPhB, CoCB, TPFB, TFM, and TRIS; Supplementary Figure S9). Thus, CyPF6 may undergo an energetically favorable anion exchange with KTPFB to generate the nontoxic CyTPFB species in cell media, leading to decreased toxicity and increased cell viability. These data indicate that the toxicity of organic salts is not due to the toxicity of the anion itself, or cellular uptake.

Applications in imaging

We next demonstrated that the concept of counterion-mediated tunability can be used to improve in vitro imaging of live cells. Commercially available cyanine molecules used for NIR imaging are typically formulated with halide anions (e.g. chloride or iodide), including the Cy3, Cy5, and Cy7 analogs. We performed anion exchange reactions on Cy7Cl to replace the chloride with the range of anions described above. While Cy7Cl is highly cytotoxic, Cy7+ can be tuned to become less toxic when paired with TPFB and TRIS (Fig. 5A). This demonstrates that anionic modulation of toxicity is not limited to a specific fluorescent cation, and this effect can be replicated in alternative organic salt formulations. Reduced toxicity is desirable for live cell imaging, as brighter images can be captured with less cellular damage. We have improved live cell imaging using nontoxic anion pairing in both Cy+ and Cy7+. In contrast to the images obtained using toxic CyPF6 and Cy7Cl, brighter images can be captured using nontoxic CyTPFB and Cy7TPFB (Fig. 5B-E). Due to their high toxicity, CyPF6 and Cy7Cl must be used at low concentrations of 1.2 µM and 1.0 µM, respectively. Nontoxic CyTPFB and Cy7TPFB can be used at higher doses of 95 µM and 6 µM, respectively, allowing for increased absorption and absolute brightness while preserving cell viability. Thus, enhanced brightness and lack of toxicity lead to improved images that capture representative cells under less cellular stress. Finally, an initial in vivo demonstration of the tumor-targeting ability of fluorescent organic salts is provided: intraperitoneally injected CyPF6 preferentially localizes to the tumor in a mouse breast cancer model (Fig. 5F–G).

Figure 5
figure 5

Novel and commercial fluorescent dyes can be tuned to be nontoxic for brighter imaging. (A) Commercially available Cy7, sold as Cy7Cl, can be tuned for toxicity through counterion pairing. A549 cells were incubated with Cy7+ paired with indicated anions at 1 μM. Commercial formulation of Cy7 with Cl is found to be cytotoxic; TPFB pairing shows a dramatic decrease in cytotoxicity with a minor amount of phototoxicity; TRIS pairing eliminates both cytotoxicity and phototoxicity (*P ≤ 0.05). Data are displayed as means ± S.E.M., n = 3. (B) Novel fluorescent cation Cy+ paired with PF6 is cytotoxic at low concentrations (1.2 μM), leading to dim images. (C) However, Cy+ paired with TPFB is non-toxic even at increased concentrations (95 μM), and provides brighter images. (D) Commercially available Cy7Cl is cytotoxic at 1 μM and provides dim images. (E) When Cy7 is paired with counterion TPFB, it also becomes non-toxic at higher concentrations (6 μM) and provides brighter images. Scale bar = 100 µm (40x). (F) Anteroinferior image of supine FVB WT mouse with a MMTV myc-driven mammary tumor. Hair was removed from the abdomen for improved visualization. (G) CyPF6 localizes to tumors to enable tumor detection and therapy. Fluorescent images were taken at 41 hours post intraperitoneal injection of 1 mg/kg CyPF6 in PBS. Scale bar represents relative grey value.


There is growing interest in developing noninvasive cancer theranostic agents that can detect and target a wide range of tumor types with minimal toxic side effects. This work develops a platform for tuning the toxicity of theranostic agents through counterion pairings for applications in both enhanced imaging and effective therapy. We have demonstrated the ability of weakly coordinating anions to tune cellular toxicity of multiple organic salts by influencing the energy level of the fluorescent cation to impact generation of mitochondrial superoxide. Nanoparticle formation is necessary for the observed modulation of cellular toxicity by the counterion, as it preserves salt composition and prevents ionic dissociation in aqueous solution. We have shown that the tunability in cellular toxicity is independent of intracellular concentration, localization, anionic toxicity, and is not specific to a particular ionic fluorophore. These data demonstrate that electronic modulation via counterion pairing can tune the cytotoxicity and phototoxicity of photosensitizers in cellular environments. We find a correlation between the zeta potential of nanoparticles in aqueous solution and their cyto- and phototoxicity (Supplementary Figure S11). Cytotoxic/phototoxic nanoparticles have positive zeta potentials, while non-cytotoxic/phototoxic nanoparticles have negative zeta potentials, and non-cytotoxic/non-phototoxic nanoparticles have even lower negative zeta potentials (Supplementary Table S1). Interestingly, nanoparticles with negative zeta potentials have distinct cyto- and phototoxicities, while nanoparticles with positive zeta potentials have overlapping cyto- and phototoxicities (Supplementary Figure S11). Zeta potential has been correlated to HOMO level38, and these shifts in HOMO are likely the driving force for dictating phototoxicity. While we have demonstrated the correlation between energy level modulation and phototoxicity, the mechanism by which valence energy levels effect cellular toxicity remains an open question for future studies. We hypothesize that the degree of phototoxicity is dictated by energy level resonance with components in the mitochondria. For example, CyFPhB with a lower absolute HOMO is highly phototoxic, while CyTPFB with a higher absolute HOMO is not phototoxic even at orders of magnitude higher concentrations. This is likely due to the ability of the photoactivated fluorophore to resonately perform electron transfer reactions within the mitochondria and therefore produce varying amounts and types of particular radical and reactive species. Energy level modulation is only achievable with nanoparticle formulation, as free salts show the same redox potential and therefore the same energy level (Supplementary Figure S3C-D)29. Non-toxic pairing with anions such as TPFB and TFM can be used to reduce cellular toxicity during diagnostic imaging. In contrast, we have selectively enhanced phototoxicity in response to NIR excitation while eliminating dark cytotoxicity of Cy+ across a range of cell lines by pairings with anions such as FPhB and CoCB. This approach has the potential to increase targeting efficacy in tumors while minimizing nonspecific toxicity in healthy tissue. In addition to having broad clinical applications, this work gives insight into a novel method for modulating the electronic characteristics of fluorescent cation-anion pairings, and provides a rational strategy for enhancing existing photodynamic drugs and imagers.



Synthesis of CyPF6, CySbF6, CyFPhB, and CyTPFB: Precursor salts (CyI and NaPF6, NaSbF6, NaFPhB, or KTPFB) were dissolved in methanol:dichloromethane (MeOH:DCM) mixtures and stirred at room temperature under nitrogen. The counterion precursor was added in 100% molar excess to drive the exchange of ions. The product compounds were formed as solid precipitates after approximately 5 minutes. They were collected using vacuum filtration and rinsed with MeOH. The crude product was dissolved in minimal DCM and run through a silica gel plug with DCM as the eluent to remove unreacted precursors and other impurities. The product compound exiting the silica was recognized by its color and collected. Excess DCM was removed in a rotary evaporator. Reaction yield and purity were confirmed using a high mass accuracy time-of-flight mass spectrometer coupled to an ultra-high performance liquid chromatography (UPLC-MS) in positive mode to quantify cations, and in negative mode to quantify anions. For ion purity measurements, solutions of precursors and products were prepared in various known concentrations and analyzed by UPLC-MS. Typical reactions led to products yields of >60% with purities >95%. Reaction schemes and purification procedures described previously were used30,43.

Synthesis of CyTRIS and CyTFM: Precursor salts (CyI and TBA-TRIS or NaTFM) were dissolved in DCM in a 1:2 molar ratio and stirred at room temperature under nitrogen for 1 hour. The reaction contents were passed through a silica gel plug using DCM as the eluent, where the purified product was collected and quantified with UPLC-MS as described for the salts above. Similar yields and purities were achieved for CyTRIS and CyTFM as other salts.

Synthesis of CyCoCB: Precursor salts CyI and NaCoCB were dissolved in MeOH in a 1:2 molar ratio and stirred at room temperature under nitrogen. CyCoCB formed and precipitated out of solution after approximately 5 minutes. The crude product was collected using vacuum filtration and rinsed with MeOH. It was then purified with silica gel chromatography and the purity was quantified with UPLC-MS as detailed previously. Reaction yield and purity of CyCoCB was similar to that of the other salts discussed here30,31.

Synthesis of Cy7PF6, Cy7FPhB, Cy7TPFB, and Cy7TRIS: Precursor salts (Cy7Cl and NaPF6, NaFPhB, KTPFB, and TBA-TRIS) were dissolved in DCM in a 1:2 molar ratio and stirred at room temperature under nitrogen for 1 hour. Reaction contents were passed through a silica gel plug using DCM as the eluent, where the purified product was collected and quantified with UPLC-MS. Reaction yields were 45–50% with similar purity to other salts.

Cyanine7 NHS ester (Cy7) was utilized as received (Lumiprobe), as a commercial reference.

Cell culture

Human lung carcinoma (A549) and metastatic human melanoma (WM1158) cells were cultured in Dulbecco’s Modified Eagle’s Medium (DMEM) with 4.5 g/L glucose without sodium pyruvate with 10% heat inactivated fetal bovine serum supplemented with 2 mM glutamine and 1% penicillin and streptomycin. Cells were incubated in 37 °C with 5% CO2 without light exposure.

Viability studies

A549 and WM1158 cells were seeded at a density of 50,000 cells per well in 6-well tissue culture plates. After 24 hours of incubation, media was aspirated and replaced with media containing fluorescent dyes at indicated concentrations. Each well was irradiated with an 850 nm LED lamp with an illumination flux of 526 mW/cm2 for an hour in the incubator, and control cells were left in a dark incubator without irradiation. For studies using Cy7, a custom made 740 nm LED lamp was used, but with the same illumination flux. Immediately after irradiation, the media was replenished with fresh dye-laced media and allowed to incubate for another 24 hours. The same procedure was done at 48 and 72 hours, but the cells received no further dye-laced media after 72 hours. Viable cell number was determined at 24 and 96 hours using 4% trypan blue and a Nexcelom Cellometer Auto T4 cell counter. All assays were done with 3 biological replicates. The fold change in cell proliferation over days of treatment was calculated using the following equation44:

$$Fold\,change={\log }_{2}\frac{Day\,4\,viable\,cell\,count}{Day\,1\,viable\,cell\,count}$$

The half maximal inhibitory concentration (IC50) was calculated by linear regression analysis of cell viability versus concentration data.

Fluorescent imaging

Images were obtained using a Leica DMi8 microscope with a PE4000 LED light source, DFC9000GT camera, and LAS X imaging software. A549 cells were seeded in 3 cm tissue culture plates at a density of 50,000 cells per well in DMEM containing fluorescent organic salts at indicated concentrations. The cells were incubated for 2 days at 37 °C with 5% CO2 until the day of imaging. For live cell imaging, the media was aspirated, and the cells were washed with phosphate buffered saline (PBS, Sigma-Aldrich) 5 times before being imaged in PBS.

For colocalization analysis, A549 cells were grown on 0.5 mm coverslips placed in 3 cm tissue culture plates containing media for 3 days. Cells were then fixed by aspirating media, washing with PBS 5 times, then submerging the coverslip in cold methanol and incubating on ice for 15 minutes. The fixed cells were stained with 1 µM 2′-[4-ethoxyphenyl]-5-[4-methyl-1-piperazinyl]−2,5′-bi-1H-benzimidazole trihydrochloride trihydrate (Hoechst 33342, Invitrogen) for 5 minutes, washed with PBS, and then incubated with 15 µM of 3,6-diamino-9-(2-(methoxycarbonyl)phenyl chloride (Rhodamine123) and 1 µM CyPF6 for 15 minutes before being washed and mounted to slides with Fluoromount-G (Invitrogen). Cells were analyzed using a Leica DMi8 microscope with a PE4000 LED light source, DFC9000GT camera, and LAS X imaging software.

Flow cytometry

Cells were incubated with phototoxic concentrations of CyPF6 (1 µM), CyFPhB (5 µM), or CyTPFB (15 µM) and exposed to NIR light for 4 days as described above. Each day, cells were collected for analysis by trypsinization from plates (prior to any illumination), spun down and resuspended in a staining buffer consisting of Hank’s buffered salt solution (HBSS, Sigma-Aldrich) with 10 mM 4-(2-Hydroxyethyl)piperazine-1-ethanesulfonic acid (HEPES, Sigma-Aldrich) and 2% FBS. Cells were separated into 2 populations for staining with 15 µM of chloromethyl-2′, 7′-dichlorodihydrofluorescein diacetate (cm- H2DCFDA, Invitrogen) for 60 minutes, or 2.25 µM of MitoSOX (Invitrogen) for 20 minutes. Hydrogen peroxide was used as a positive control for H2DCFDA. Cells were analyzed on a BD LSR II using FITC and PE-A channels and 30,000 events counted. Fluorescence was normalized to the initial value.

Ultraviolet visible spectroscopy

Cyanine dyes were diluted to a concentration of 5 µM in cell media. All dyes were characterized using a Perkin-Elmer 25 UV-Vis spectrometer in the wavelength range from 500–1100 nm in normal incidence transmission mode with a resolution of 1 nm and a 1.27 cm path length. A pure solvent reference was utilized to remove reflections so that the absorption is calculated as 1-transmission.

Zeta potential measurements of nanoparticles

A Zetasizer Nano Z (Malvern Instruments, UK) at 25 °C with a 633 nm laser was used to calculate zeta-potential measurements (ζ) using laser Doppler micro-electrophoresis. Measured electrophoretic mobilities (μe) were converted to zeta potentials from the Henry equation:

$$\zeta =\frac{{\mu }_{e}3\eta }{2{\varepsilon }_{\tau }{\varepsilon }_{0}\,f(Ka)}$$

where ετ is the dielectric constant of the medium, ε0 is the permittivity of the vacuum, f(Ka) is Henry’s function, and η is the viscosity of the colloid. Samples were run in triplicate at a concentration of 10 µM in 10% phosphate buffered saline and 1% DMSO.

Scanning electron microscopy

Polished glass substrates (Xin Yan Technology LTD) for SEM imaging were cleaned by sonicating in soap, deionized water, acetone, and by boiling in isopropanol for 6 minutes each, followed by oxygen plasma treatment for 3 minutes. Nanoparticles of CyX were spin-coated with 50 µL of 0.5 µM solutions on a glass substrate at 2000 rpm for 30 seconds. A thin film of platinum was deposited on the SEM samples to reduce charging. A Carl Zeiss EVO LS 25 Variable Pressure Scanning Electron Microscope and a Tescan Mira3 Scanning Electron Microscope were used to capture SEM images of organic salt nanoparticles. Size distributions were obtained using ImageJ software45.

Small-angle x-ray scattering

Small-angle X-ray scattering (SAXS) was performed with a Rigaku Ultima IV X-ray Diffractometer in the Robert B. Mitchell Electron Microbeam Analysis Lab at the University of Michigan. Parallel beam and SAXS alignment procedures were performed to prepare the diffractometer for measurements. Boron-rich glass capillaries with 1.5 mm outside diameter were purchased from the Charles Supper Company. A control sample of 2 mg/mL PbS quantum dots (Millipore Sigma, 3 nm nominal size) in toluene was run first to verify measurement accuracy, producing a mean particle size of 3.3 ± 0.2 nm after subtracting a toluene background scan. A sample of 2.5 mg/mL CyTPFB nanoparticles in 50% DMSO, 50% water was tested, along with a 50% DMSO, 50% water blank, and produced a size distribution curve shown in Supplementary Figure S5 with a mean particle size of 4.1 ± 0.6 nm. Solubility limits prevented collection of SAXS data for the other CyX nanoparticles, as high concentrations of >1 mg/mL were necessary to obtain data above the background (see Supplementary Table S3).

Differential pulse voltammetry

Differential pulse voltammetry measurements were made using a μAutoLabIII potentiostat to evaluate oxidation potentials for monomer and nanoparticle salts. For monomers, salts were dissolved at 1 mM in acetonitrile with 100 mM TBA-PF6 as a supporting electrolyte. Glassy carbon, Ag/AgNO3 (0.36 V vs SCE), and Pt mesh were used as the working, reference, and counter electrodes, respectively. Nanoparticles of the salts were made at 0.1 mM in 10% DMSO (CyI, CyPF6) and 50% DMSO (CyFPhB) in H2O with 100 mM NaCl as a supporting electrolyte. CyTPFB NPs have greater solubility and were tested at 0.5 mM in 50% DMSO. Ag/AgCl reference electrode (−45 mV vs SCE) was used for the nanoparticle measurements. Nanoparticle solubility limitations in acetonitrile limited collection of CV scans to CyI, CyPF6, CyFPhB and CyTPFB, for which concentrations of at least 0.1 mM were achievable.


Photoluminescence (PL) spectra were collected using a PTI Spectrofluorometer for monomers of Cy7X and CyX salts, as well as nanoparticles of CyX salts. For Cy7X monomers, solutions at 1 μM salt in DMSO were used. Solutions of 5 μM CyX salts were prepared in DMSO for PL measurements. Nanoparticles of CyX salts were made at 2.5 μM in 1% DMSO, 99% water. A mounted Thorlabs 735 nm LED was used at approximately 5% power as the excitation source for the PL spectra of the CyX monomers and nanoparticles, while a monochromated Xenon lamp (700 nm) was used as the excitation source for Cy7X PL.

Quantum yield

Quantum yield (QY) data was gathered using a PTI Spectrofluorometer with an integrating sphere (350–900 nm) for monomers of Cy7X and CyX salts. A Thorlabs 735 nm LED was used at approximately 5% power as the excitation source for all quantum yield measurements. Cy7X solutions were made at 1 μM in DMSO, while CyX salts were prepared at 2.5 μM in DMSO.

Determination of intracellular organic salt concentrations

Cells were seeded at a density of 50,000 cells per well in 6-well plates in media containing 1 µM of indicated dye. Cells were allowed to incubate for 3 days at 37 °C with 5% CO2 with a media change to fresh dye-laced media on day 2. For extraction, media was aspirated from each well, and cells were washed with PBS. The cells were removed from the plate using 0.05% trypsin/EDTA (Thermo Fisher) and centrifuged at 1,500 rpm for 6 minutes. The supernatant was aspirated, and the cell pellet was washed with saline. Saline was aspirated, and the pellets were resuspended with room temperature HPLC-grade 3:7 methanol:acetonitrile (Sigma Aldrich) and centrifuged at 13,000 rpm for 5 minutes. The supernatant was collected in a separate tube, and the pellet was again resuspended in HPLC grade 3:7 methanol:acetonitrile and centrifuged at 13,000 rpm for 10 minutes. The supernatant was combined with the first supernatant for analysis by liquid chromatography-mass spectrometry.

Cell extracts were analyzed the day of extraction using a Waters Xevo G2-XS QToF mass spectrometer coupled to a Waters Acquity UPLC system. The UPLC parameters were as follows: autosampler temperature, 10 °C; injection volume, 5 µl; column temperature, 50 °C; and flow rate, 300 µl/min. The mobile solvents were Solvent A: 10 mM ammonium formate (Sigma-Aldrich) and 0.1% formic acid (Sigma-Aldrich) in 60:40 acetonitrile:water; and Solvent B: 10 mM ammonium formate and 0.1% formic acid in 90:10 isopropanol:acetonitrile. Elution from the column was performed over 5 minutes with the following gradient: t = 0 minutes, 5% B; t = 3 minutes, 95% B; t = 4 minutes, 95% B; t = 5 minutes, 5% B. ESI spray voltage was 3,000 V. Nitrogen was used as the sheath gas at 30 psi and as the auxiliary gas at 10 psi, and argon as the collision gas at 1.5 mTorr, with the capillary temperature at 325 °C. Data were acquired and analyzed using MassLynx 4.1 and QuanLynx software. Cy+, which typically elutes at 2.5 minutes, was analyzed in positive mode. Standards of each anion-cation pair were run at concentrations of 5, 10, 25, 50, and 100 nM to generate standard curves for quantitation. Blanks were run before each sample to minimize sample carryover.

In Vivo Imaging

All animal protocols were approved and performed in accordance with guidelines set by the Institute of Animal Care and Use Committee (IACUC) of Michigan State University. Primary MMTV-Myc papillary tumors were donated by Dr. Eran Andrechek and have been previously described46. Viable frozen tumor chunks (1 mm3) were implanted into the right fourth mammary fat pad of FVB/NJ female mice (purchased from Jackson Laboratories, Bar Harbor, ME, USA) at 6–8 weeks of age. Tumors were monitored with calipers twice a week. Once tumors reached 7.5 mm by the longest axis, mice were given a 1 mg/kg intraperitoneal injection of CyPF6 in 200 µL of sterile PBS and 1% DMSO. Mice were anesthetized with 3% isoflurane and fluorescent images were taken at 41 hours post injection using a Leica M165FC stereoscope with a 740 nm PE4000 LED light source, DFC9000GT camera, and LAS X imaging software.

Statistical analysis

Statistical analysis was done using OriginPro 8 software. For analyses with more than two group comparisons, a one-way ANOVA analysis was performed with an ad hoc Bonferroni test. To assess the homogeneity of variance and suitability for ANOVA analysis, a Levene’s test was performed. P-values < 0.05 are reported as statistically significant.