DNA and RNA nucleases play a critical role in a growing number of cellular processes ranging from DNA repair to immune surveillance. Nevertheless, many nucleases have unknown or poorly characterized activities. Elucidating nuclease substrate specificities and co-factors can support a more definitive understanding of cellular mechanisms in physiology and disease. Using fluorescence-based methods, we present a quick, safe, cost-effective, and real-time versatile nuclease assay, which uniquely studies nuclease enzyme kinetics. In conjunction with a substrate library we can now analyse nuclease catalytic rates, directionality, and substrate preferences. The assay is sensitive enough to detect kinetics of repair enzymes when confronted with DNA mismatches or DNA methylation sites. We have also extended our analysis to study the kinetics of human single-strand DNA nuclease TREX2, DNA polymerases, RNA, and RNA:DNA nucleases. These nucleases are involved in DNA repair, immune regulation, and have been associated with various diseases, including cancer and immune disorders.
DNA and RNA nucleases are a hallmark of a growing number of cell signalling cascades including the DNA damage response and immune diversification. They dictate many DNA repair pathway choices by controlling the DNA damage substrates created that dictate downstream options during the signalling cascade. The complex roles DNA and RNA nucleases play in DNA repair pathways underpin several premature ageing-, immune-, and tumour- related syndromes. All of these can result from aberrations in the structural and/or catalytic functions of DNA and RNA nucleases (reviewed in1,2). Despite their importance, the activities of numerous human DNA nucleases are still debated (e.g. Mre11, CTIP, etc.3,4). There are also several yet uncharacterised proteins harbouring predicted nuclease domains in mammalian genomes5,6,7,8.
Even with their myriad and complex functions, DNA/RNA nucleases can be broadly defined by their substrate specificity, directionality of resection, and processivity. A significant restrictive limitation in nuclease studies has been the adequate identification of their catalytic functions and/or their relative activities against differing DNA/RNA intermediates. Conventional nuclease assays predominantly involve the use of radioactive labelling to visualise DNA substrates on an agarose gel9,10,11. The use of radioactive isotopes delivers highly specific, sensitive assays that are free from interference. However, these assays are often inefficient, time-consuming, qualitative, and potentially hazardous12,13. Additionally, the assays are discontinuous, and must be stopped at discreet, often arbitrary, time points before measuring readouts14. Whilst this can provide an indication of reaction rate, it does not allow for real-time visualisation of the catalytic resection activity.
Radiolabelled oligonucleotides are gradually being replaced with fluorescent nucleic acid stains such as DAPI15 and other commercially-available dyes including, but not limited to, Midori Green, SYBR Green I and Acridine Orange16. PicoGreen (PG) is a commercially available dye that emits a fluorescent signal upon intercalation with double-stranded DNA (dsDNA), emitting a fluorescent signal 1,000-fold stronger compared to when it is free in solution. In comparison, the Quant-It (QI) mircoRNA assay dye can specifically recognise short RNAs (<40-nts) and other nucleic acids. The superior sensitivity can quantify picogram or nanogram levels of dsDNA, respectively, unlike other fluorescent dyes, including Hoechst17, ethidium bromide17, EvaGreen18, SYBR Green18 and YOYO-118. Several other sophisticated fluorescent techniques have been devised, building upon the use of FRET, whereby fluorescence is either quenched or dequenched following nuclease activity19. Methods involving graphene oxide surfaces20, electrochemical redox reactions21,22,23, complexing of DNA with a polycationic polymer24, or immobilising nucleotides on magnetic beads25 have also been developed. While highly sensitive, these methods have been designed purely for the detection of a very limited number of DNA and RNA nucleases rather than for their characterisation26.
Similar to other nucleic acid dyes, PG has proven to be a versatile DNA stain in different experimental conditions. PG has been used to visualise dsDNA in agarose electrophoresis as a quality control marker to identify fragmented and nicked DNA27. It has also been implemented in flow cytometry analysis of cell-free DNA which can increase in certain pathologies, such as cancer and autoimmune syndromes28. PG exhibits readily detectable, albeit reduced, fluorescence readings at temperatures of 37 °C, despite manufacturer recommendations to work at room temperature29. As PG very preferentially binds dsDNA compared to ssDNA and RNA structures30, it has been an important feature of discontinuous enzyme-mediated DNA-modifying studies, such as nucleases31, helicases32, polymerases33,34, polymerase inhibitors35, telomerases36, and primases37. However, the full potential of PG and QI in real-time visualisation of reaction progression remains limited38.
Here, we propose a PG and QI fluorescence-based toolkit for performing real-time fluorescent nuclease assays. Our toolkit has been optimised for a range of important representative nucleases, including: DNase I (a non-specific nuclease), T7 exonuclease (a 5′-3′ bacteriophage nuclease)14, Exonuclease III (a 3′-5′ E. coli nuclease)39, human Trex2 (a 3′-5′ ssDNA nuclease)40, a viral nickase, Nt.CviPII41, RNase A (a ssRNA nuclease) and RNase H (targets RNA in RNA:DNA hybrids). Furthermore, we designed a library of nucleotide substrates to account for these enzymes′ differential activities. Our DNA substrates are designed with biotin-TEG-modified 3′ or 5′ termini to provide insight into enzyme directionality. The addition of streptavidin to the biotinylated ends protects the substrate from resection at the modified end, as was demonstrated in a previous resection assay10. This oligonucleotide library can be used to study a multitude of uncharacterised nucleases, and their substrate preferences, to elucidate their roles in DNA repair and genomic maintenance. To extend the power of our approach, we have designed physiologically relevant substrates containing mismatches and methyl-cytosines. It has been posited that repair nucleases resect along a methylated sequence of DNA, thus permanently removing epigenetic markers. Upon recognition of a mismatch, the mismatch repair (MMR) machinery generates incisions either side of the error, allowing the 5′-3′ exonuclease Exo I to resect through the mismatch, permitting polymerases to accurately replicate across the resulting ssDNA tract42. As such, it would be interesting to determine whether this mismatch is permissive to nucleases in general.
Our assay relies on the loss or gain of the DNA duplex structure, and so is potentially useful for study of other enzymes that reconstitute or compromise the DNA-pairing structure. As an example, we demonstrate the observation of polymerase activity by monitoring an increase in fluorescence as the complementary strand is synthesised by the nuclease-deficient Klenow fragment DNA polymerase. PG has previously been used to visualise polymerase activity, but to our knowledge, this is the first time it has been described in a real-time, continuous assay33. Our work provides a robust and versatile universal toolkit to characterise both DNA and RNA nucleases, and determine their substrate preferences with high resolution and sensitivity. This assay can be adapted and modified to suit a wide range of DNA repair applications. This fluorescence-based method is faster, cheaper, and safer than conventional DNA/RNA resection assays using radioisotopes. Additionally, it works cross-species and is platform agnostic. Furthermore, this protocol is sensitive enough for enzyme reaction kinetic calculations and can distinguish the structural preferences exhibited by an enzyme for its substrate.
Materials and Methods
DNA substrates were prepared by diluting plasmid DNA in HyClone waterTM (GE healthcare), and unmodified HPLC-purified oligonucleotide substrates (Eurofins) and modified HPLC-purified oligonucleotides (Integrated DNA Technologies) in 1X Annealing Buffer (Sigma-Aldrich) for DNA substrates and siMAXTM dilution buffer (Eurofins) for all RNA substrates. Oligonucleotides were designed and optimised against secondary structure formation using the ‘Predict a Secondary Structure Web Server’ (https://rna.urmc.rochester.edu/RNAstructureWeb/Servers/Predict1/Predict1.html)43 and annealed at a 1:1 molar ratio. Table S1 shows all the oligonucleotides and their respective illustrations, while Table S2 lists the olignonucleotide sequences and modifications.
Nucleases and PG preparation
The nucleases used were RQ1 RNase-Free DNase I (Promega), T7 exonuclease (New England Biolabs), Exonuclease III (New England Biolabs), Trex2 (Stratech), Klenow Fragment (3′ → 5′ exo-; New England Biolabs), RNase A (Thermo Fisher) and RNase H (New England Biolabs). In preparation for each assay, nucleases used were diluted on ice in their appropriate storage buffers, omitting glycerol. DNase I, T7 exonuclease, Exonuclease III, Trex2 and Klenow fragment storage buffers and reaction buffers were all filtered prior to use, and autoclaved where possible.
The PG reagent from the Quant-iTTM PicoGreenTM dsDNA Assay Kit (Invitrogen) was prepared immediately before use by making a 1:200 dilution of the PG in TE buffer (10 mM Tris-HCl, 1 mM EDTA, pH 7.5) and 40% (v/v) glycerol. For the RNase assays, the dye from the Quant-iTTM microRNA Assay Kit (Invitrogen) was prepared by diluting the microRNA reagent A into buffer B in a 1/2000 dilution, as detailed in the protocol for the kit.
Each DNA substrate reaction mixture contained 50 nM DNA substrate, 1X reaction buffer (specific for each enzyme), 50 µL PG solution, 0.02 mg/mL streptavidin (cat. 21125, Thermo Fisher Scientific) if required, 0.25 mM dNTPs if required, 5 µL enzyme or relevant storage buffer. For the DNA nucleases, Milli-Q water was added to bring the total reaction volume to 100 µL. The RNA nuclease reaction mixtures contained 50 nM RNA substrate 90 µL Quant-iT reagent and 5 µL enzyme or relevant storage buffer. RNase A does not require a specific reaction buffer for its activity, and therefore the enzyme was instead diluted in TE buffer. RNase-free HyClone™ Water (cat. SH305380, Fisher Scientific) was used to bring the reaction volume to 100 µL,. Samples were tested in a 96-well, black flat bottom plate (cat. M9685, Sigma-Aldrich). The final components added were the storage buffers, then the enzyme mixtures, in order to start the reaction.
All storage buffers and reaction buffers were made according to the recipes available on their respective NEB and Thermo Fisher web pages.
A CLARIOstar microplate reader (BMG labtech) was pre-heated to 37 °C. Samples were read every 40–50 s for 30–60 mins. Excitation and emission wavelengths used were 483–15 nm and 530–30 nm, with a focal height of 10.2, 20 flashes per well, with a shake before each read.
For statistical analysis of the data, one-way ANOVA with the Tukey’s post-hoc tests were used. This was implemented using GraphPad Prism v7.03. An example of the workflow is available in Supplementary Materials.
Establishing assay parameters using DNase I
The foundation of the nuclease assay reported here is to monitor the corresponding loss of the fluorescent signal as dsDNA is degraded in response to DNA metabolizing enzymes, primarily DNA nuclease activities. As illustrated (Fig. 1a), PG binds to dsDNA and produces a fluorescent signal that is approximately 400-fold more intense compared to when it is free in solution. Upon the addition of a nuclease, such as DNase I, the duplex structure is lost as the enzyme digests the DNA.
A calibration curve was established to determine the linear range in which the concentration of DNA is directly proportional to the fluorescent signal (Fig. 1b). We compared both plasmid DNA (13.1 kb) and oligonucleotide DNA (80 bp) and determined that the maximum concentration of DNA that could be used in the assay was 2.5 ng/µL regardless of the length and structure of the DNA. Above 2.5 ng/µL this, the fluorescent signal plateaued irrespective of the increase in DNA concentration (Fig. 1b).
As an alternative to converting fluorescence to molar concentrations, which vary according to the length of the DNA substrate (Fig. S1a–d), we generated a standard curve based on the signal produced from 80-, 60-, 40- and 20-bp substrates, as well as a 0-bp single-stranded 80-mer oligomer to represent the final resection product of other resection nucleases (Fig. 1c). PG binds ssDNA with a lower affinity than dsDNA, as indicated by the standard curve. For resection nucleases (Figs 2 and 3) as opposed to DNase, this is a more appropriate end-point of the reaction rather than the comparatively minor fluorescent signal produced in the absence of substrate. This standard curve shows a linear increase in fluorescence with the length of duplex DNA (R2 = 0.99).
The purpose of the standard curve is to enable the conversion of fluorescence units to DNA base pairs to calculate the length of substrate remaining following nucleolytic attack. To convert the data from fluorescence units, the data is first normalised to their relevant control (absence of enzyme). This has the additional benefit of accurately accounting for the inevitable photobleaching effect. As such, any decrease in fluorescence recorded is a result of nuclease activity and not photobleaching of the PG. We then convert the standard curve to base pairs by finding the gradient (m) and intercept (c) of the curve at each time point, and from this we can determine the length of dsDNA (x-axis) from the fluorescent signal (y-axis) at each time point and experimental condition. A worked example is available in Supplementary Materials.
We performed a DNase I titration and converted the y-axis from fluorescence units to length of dsDNA (Fig. 1d). From this we determined that the rate increases with the concentration of DNase I, therefore indicating that the reaction is first order with respect to the enzyme (Fig. 1e). We then calculated that the rate of digestion mediated by DNase I on a 2.5 ng/µL 80-bp dsDNA substrate at 37 °C is approximately 0.001 bp nM−1 sec−1 (Fig. 1f).
Optimisations for substrate-specific nucleases
3′-5′ nucleases: Exonuclease III
Oligonucleotides are far more versatile substrates than plasmids as they can be designed to have different terminal structures, such as 5′ or 3′ overhangs, Y-structures, Holliday junctions, strand invasion or even G-quadruplexes44. Their much shorter length ensures that each enzyme is confronted with a higher proportion of these alternative structures. As such, only oligonucleotides were used for further development of the assay. Our oligonucleotides were designed and optimised so as to reduce the likelihood of secondary structure formation in the ssDNA43.
To account for having a sufficient dsDNA region as well as structurally appropriate terminal ends to study nuclease structural preferences, we designed substrates that were blocked at one end in order to direct the enzyme to resect one single strand only, leaving a full-length, blocked, single-stranded 80-mer substrate as the end product. The substrates were blocked with biotin-TEG (BITEG) at the necessary terminal ends. BITEG alone is insufficient to inhibit resection on substrates blocked at both terminal ends. However, inclusion of streptavidin in the reaction mix successfully protected the modified ends from resection (Fig. S2a,b). We noticed that the presence of streptavidin, but not BITEG alone, is responsible for preventing total resection, prohibiting ExoIII from resecting the final 20 nucleotides (Fig. S2c). This combination of biotin and streptavidin has previously been shown to be effective10. Substrates blocked at both ends while in the presence of streptavidin and treated with enzyme show 15–20% loss of fluorescence. The expected purity of the oligomers synthesised is approximately 85% and, as such, there is always a small proportion of substrate present that either lacks the BITEG modification, or is not synthesised to full-length, rendering them susceptible to resection (Fig. S2a–c). One additional benefit of using BITEG and streptavidin to block resection is that it does not require prior knowledge of inhibitory structures (e.g. designing 4-nt 3′-overhangs to inhibit ExoIII45 or a 22-nt 5′-overhang specifically to inhibit T7 Exo14).
We ensured that the linear range is maintained with the addition of BITEG and streptavidin using a calibration curve (Fig. 2a,b). While the overall fluorescence is lower, the maximal usable concentration of substrate remains unchanged. We then tested whether the assay could be used to study the activity and structural preference of 3′-5′ exonucleases, such as ExoIII. ExoIII has been well-characterised, and so we attempted to replicate its known activities in our assay. A range of ExoIII titrations were performed on three different substrates: blunt ended, 2-nt 3′-overhang, and a 4-nt 3′-overhang. The substrates have been depicted as cartoons for simplicity, and have been named according to their modifications; for example, S* indicates a 3′-terminal BITEG modification, and +2S* indicates a 3′-BITEG modification, and a 2-nt 3′ overhang on the opposite strand. *S would instead reference a 5′-BITEG modification. The preference of ExoIII for blunt and 2-nt overhangs is known, as well as the inhibitory effect of 4-nt 3′-extensions, as these activities are often exploited for various sequencing and DNA detection techniques46,47,48,49 (Fig. 2c–e). After determining the rate of resection on all substrates (Fig. 2f–g), it is clear that this assay is readily able to detect the previously reported substrate specificity of ExoIII. ExoIII is completely inhibited by 4-nt 3′-overhangs, and resects with this with a similarly low rate as the negative control, which has both 3′-ends blocked with BITEG and streptavidin. There is a peak of activity at 10 nM ExoIII, in which the rate of resection appears to be twice as efficient compared to higher and lower concentrations of the enzyme.
Through analysis of the efficiency of each nuclease, we can also compare the activities of ExoIII and DNase I. These results suggest that the ExoIII resection activity is approximately five-fold faster than the DNase I nuclease activity (Fig. 2g) at 37 °C in their respective buffers.
5′-3′ exonuclease: T7 exonuclease
Having demonstrated that this assay is suitable for 3′-5′ nucleases, we next explored whether the assay could be used to study 5′-3′ nucleases. This necessitated the synthesis of substrates presenting 5′-BITEG modifications. We tested the affinity of T7 Exo for a selection of substrates, incorporating blunt, 2-, 10- and 20-nt 5′-overhangs (Fig. 3a). T7 Exo shows no significant difference between the affinity for blunt and 2′-nt 5′-overhangs. As had previously been observed, the rate of T7 Exo-mediated resection with a 20-nt overhang was approximately 50% of a short overhang14 (Fig. 3b). Unexpectedly, as the length of the overhang increased, resection was slightly delayed. However, after resection commenced, it appeared to take place at a faster rate on the intermediate overhangs, considering that the reaction culminates at approximately the same time point on all substrates (p < 0.002 between *S and *S+10, and p < 0.0001 between *S and *S+20) (Fig. 3b). Regardless, difference in rate is rather minimal. In contrast to ExoIII, T7 Exo is limited, but not inhibited, by the 20-nt overhang.
Studying enzyme resection through single-nucleotide mismatches
During mismatch repair, DNA nucleases resect through the mismatch to generate a single-stranded tract of DNA along which DNA polymerases can replicate50,51,52,53,54. It has been suggested that these resection events may even remove epigenetic signatures on the DNA, such as 5-methylcytosine55, which may then be permanently lost when repaired with an unmodified cytosine, and not targeted by de novo methyltransferases, Dnmt3a or Dnmt3b56,57. We therefore tested if our assay can detect differences in resection rates through mismatched and methylated substrates.
We investigated ExoIII activity on mismatched substrates compared to matching substrates and identified some unexpected activities. First, we observed that ExoIII resects the two perfectly matching substrates at substantially different rates, resecting *S at a 1.7–2.0-fold faster rate than S* (Fig. 4a–d) *SC>T contains a selection of C > T substitutions, whilst G>AS* contains G > A substitutions, generating T:G and A:C mismatches, respectively. The presence of the T:G mismatches slows the rate of resection 0.09–0.16X compared to its perfectly matching counterpart (p < 0.001 for 5 nM ExoII; p < 0.05 for 10 nM ExoIII; Fig. 4d). Conversely, incorporating A:C mismatches increases the rate of resection by 1.5–1.8 × (p < 0.0001 with both 5 and 10 nM ExoIII). There is some evidence for a nucleotide preference for ExoIII, although this has not been repeated to the best of our knowledge58. The rate of resection on both the perfectly matching substrate appears to have a delayed start, particularly for S*. Interestingly, *S is then resected at an accelerated rate compared to both mismatched substrates. The mismatches resect at a slower rate but, as their resection begins at the offset, the reaction on the mismatched substrates and *S finish at the same time point for both 5 and 10 nM ExoIII.
T7 exonuclease is considered to be sequence-independent as it lacks a defined DNA binding-motif, similar to other FEN family nucleases that bind DNA in a nonspecific manner14,59. Nevertheless, it has previously been suggested that it might resect different nucleotides with variable efficiency60. Indeed, we observed that T7 Exo resects the perfectly complementary *S with more difficulty than S*, which was noticeable at higher concentrations of T7 Exo (Fig. 4e–g). Similarly with T7 Exo, our assay detected a substrate strand preference (Fig. 4h).
The addition of four T:G mismatches did not slow or accelerate T7 Exo activity. However, incorporating A:C mismatches into the more resistant substrate did appear to slow resection, and this general trend was observed across all concentrations of T7 Exo. The effect of the mismatches was more evident at lower T7 Exo concentrations (p < 0.05 for 7.5 nM and p < 0.01 for 2 nM T7 Exo). These data suggest that mismatches may only be inhibitory to T7 Exo in certain sequence contexts. Indeed, T7 Exo has been shown to recognise single-nucleotide mismatches in an SNP-detection system61.
Enzyme resection through methylated cytosines
Neither ExoIII nor T7 Exo is substantially inhibited by methylated DNA in this experimental system. At the lower concentration of ExoIII, we see a delay in resection initiation (Fig. 5a), resulting in staggered end points (Fig. 5c). However, once ExoIII starts to resect, the rates are not significantly different between the methylated and non-methylated substrates (Fig. 5d). This delay in resection is not observed at higher concentrations of ExoIII (Fig. 5b). T7 Exo showed no significant effect on either maximum rate or time taken to resect in the presence of methylated cytosines (Fig. 5e–h). To our knowledge, there is no data on the effect of methylcytosine on either ExoIII or T7 Exo resection with which to compare.
Validation of nuclease activity assay on nicks and gaps, and its use in studying nickases in combination with processive nucleases
Nicks and gaps are introduced as intermediates in DNA repair mechanisms, yet they need to be rapidly processed to prevent the accretion of double-strand breaks at replication forks, possibly leading to genomic instability if not resolved in a proper and timely manner10,62.
Due to the physiological relevance of nicks and gaps, we explored the nucleolytic activity of ExoIII and T7 Exo on these structures. In order to test this, we used a combination of substrates that had been designed to contain a nick or gap, in conjunction with blocking at both ends (both 5′ or 3′, respectively) to prevent resection from the terminal ends. We also included a recently-purified nickase, Nt.CviPII41 which is known to possess inherent exonuclease activity. Nickases cleave just one strand of duplex DNA, breaking the phosphodiester backbone. Nt.CviPII preferentially cuts CCA and CCG, but cuts less efficiently at CCT41. One strand of the dsDNA substrate contains five evenly distributed CCA motifs, while the opposite strand only contains two CCT motifs, and therefore most of ExoIII’s activity should be directed on the first strand (Fig. 6a–c). To minimise the exonuclease activity of Nt.CviPII, we used a low dilution of the nickase.
Our results show that ExoIII functions marginally better on gaps rather than nicks (p < 0.0001) (Fig. 6d,f), and this may reflect its role in base excision repair where it resects from an abasic site39. ExoIII is nevertheless able to resect from a nick, and the rate is comparable to its activity on blunt ends, as previously observed63. ExoIII also resected from the nickase-induced nicks at an almost equal rate to the substrates designed to contain a single nick (Fig. 6e,f). These data demonstrate that Nt.CviPII is a very fast acting nickase against its preferred substrate sequences as there is no delay in the start of ExoIII-mediated resection.
As with ExoIII, T7 Exo also resects from both nicks and gaps. It has a more defined preference for gaps, showing a rate approximately 2.5-fold greater than for nicks (p < 0.0001; Fig. 6g,i). T7 Exo also resects from nicks generated by a nickase almost as efficiently as from a substrate already presenting a single nick (Fig. 6h,i). Typically, T7 endonuclease cleaves at nicked sites during infection to generate DNA double-stranded breaks that are susceptible to T7 Exo. As such, it is perhaps a redundant property of T7 Exo to resect from a nick64.
Alternative enzymes that degrade or synthesise dsDNA can be studied
We have demonstrated that PG is an effective dye that can be used to study dsDNA nucleases from viruses and bacteria. Given the low, but not insignificant, fluorescent signal observed for the single-stranded 80-mer control in the standard curves, we reasoned that this assay may have the sensitivity to address ssDNA nucleases, such as human Trex265. We confirmed this by showing that the assay is sensitive enough to detect a Trex2 concentration-dependent decrease in fluorescence from ssDNA substrates ranging in size from 60 to 20 nts (Fig. 7a). This indicates that this assay has considerable potential for an even wider range of DNA nucleases, and very high levels of sensitivity in order to capture such activity in detail. As expected, it takes longer for Trex2 to digest longer substrates (Fig. 7b). In terms of reaction kinetics, rate of resection is generally consistent, ranging between 1.7 × 10−4–3.4 × 10−4 nt nM−1 sec−1 (Fig. 7c), which is comparable to previously published rates66.
Since we have shown that this assay is a powerful tool for observing nuclease activity, we attempted to study whether we could capture the reverse activity and visualise an increase in fluorescence upon addition of polymerase. To investigate this, we employed the use of the well-characterised Klenow fragment polymerase (KF). KF requires a short DNA primer fragment hybridised to a ssDNA fragment along which it can replicate. We used a selection of 80-mer oligomers hybridised to a 20-, 40-, 60- and 80-mer oligomer (Fig. 7d). The data clearly indicate that KF-dependent blunting of the 20-mer 5′-overhang is possible to visualise in the context of this real-time assay. KF appears to be unable to extend the 20- and 40-mer primers to produce the full-length 80 bp dsDNA product. KF-elongation of both are inhibited once the primers have been extended to 50- or 55-mer lengths (Fig. 7d). It is understood that KF is sensitive to secondary structures in the ssDNA template, and the presence of a small hairpin adjacent to this region may be responsible for inhibiting polymerisation past this point. Previously, a terminal hairpin has not inhibited KF processivity, although an internal hairpin, such as in this case, may have a different impact on KF67. Analysis of the rate of replication suggests a preference for a longer ssDNA template, as KF polymerises at a much faster rate on the 60mer 5′-overhang, while the 40- and 20-mer 5′-overhangs are processed at a three-fold lower rate (Fig. 7e).
RNA and RNA:DNA nucleases can be also be analysed in real-time
We have established a straightforward and robust assay that can measure DNA nuclease activity. To expand the potential of this assay to include RNA nucleases, we employed the use of an alternative RNA-sensitive fluorescent dye available in the Quanit-iT microRNA assay kit, as PG emits very low fluorescent signal in the presence of RNA.
With the use of RNA nucleases, RNase A and RNase H, we ascertained that we could reproduce their known activities. Indeed, we observed that RNase A efficiently resected ssRNA (Fig. 8a), at a rate of approximately 180 nt nM−1 sec−1 on a 20-nt substrate, and 90 nt nM sec−1 on a 40-nt substrate (Fig. 8b). As expected, RNase A failed to show any nucleolytic activity on dsRNA, RNA:DNA hybrids, or dsDNA (Fig. S3a–c). Interestingly, in this buffer the 20- and 40-mer RNA substrates emitted very similar fluorescent signals and could not be teased apart, yet the fluorescent signals were easily distinguishable on dsRNA and RNA:DNA hybrid substrates (Fig. S3a-b).
On the other hand, RNase H exerts a distributive cleavage pattern on the RNA substrate of RNA:DNA hybrids, periodically cleaving the RNA to produce fragments (Fig. 8c). RNase H did not show any affinity for ssRNA, dsRNA, or dsDNA substrates (Fig. S4a-c). This may account for the much slower rates exhibited by RNase H, as it digested the RNA component of RNA:DNA hybrid substrates at 2.0 × 10−5 nt nM−1 sec−1 on the 20-bp substrate, and 3.5 × 10−5 nt nM−1 sec−1 on the 40-bp substrate (Fig. 8d).
We have further developed a highly-sensitive, fluorescence-based universal nuclease assay that works in real-time and designed a library of substrates that are appropriate for investigating a wide range number of nucleases, polymerases, and helicases. This assay can be used to calculate reaction kinetics and reaction completion times, providing a powerful quantitative tool for characterising enzymes active on nucleic acids. We have successfully validated the technique using well-studied enzymes and, in the process, identified previously unreported details of their mechanisms. Although other reports have shown the limited applicability68 and restrictions of PG69 for the study of DNA metabolism we believe our current toolkit strongly optimizes, enhances, and expands the usage of this methodology in a cost-effective and broader manner. We discuss below all the advantages our assay provides and highlight the ease of use of this new encompassing toolkit. Briefly, our new methodology provides optimized statistical analyses, standardized and modified substrates toolkit, RNA nuclease, and ssDNA nuclease capabilities.
Our assay has important applications in comparing the relative activities of enzymes. Here, we identified that ExoIII hydrolyses the DNA substrate at a faster rate than DNase I in their respective buffers. DNase I exhibits a relatively low affinity for DNA, and higher affinity strains have been engineered for treatment of cystic fibrosis70,71. DNase I may have evolved to be less efficient due to the fact that it can digest all structures of DNA, irrespective of whether it is single- or double-stranded, and deregulation of this activity could be disastrous for the cell. This limitation in its binding may exert some control to prevent inappropriate activity from causing cellular damage. ExoIII shows a greater rate of resection per enzyme protomer, yet this is counteracted by its very limited structural specificity. The product of ExoIII resection during E. coli base excision repair is a single-stranded tract of DNA that can be much more easily repaired than the damage caused by DNase I72,73.
We were also able to compare substrate specificities, as indicated by the preference of ExoIII for 3′-overhangs shorter than 4-nt and T7 Exo’s predilection for 5′-overhangs of 10-nt or fewer. As T7 Exo typically resects DNA from short 5′-overhangs introduced by T7 endonuclease during the infection process in E. coli, our results are consistent with its behaviour in vitro and in vivo14,64. In addition to substrate structures, we have considered other physiologically relevant substrates containing single-nucleotide mismatches and methylcytosines. Unexpectedly, we found that ExoIII and T7 Exo exhibited a preference for one strand of the DNA substrate. There is evidence of a nucleotide preference for ExoIII; C > A ~ T > G, although it seems that it depends on the sequence context58. Nevertheless, the results of their mismatched counterparts do coincide with published ExoIII preferences58. As such, this confirms previously reported preferences in both a qualitative and quantitative way. Work is continuing in our lab to understand the mechanisms of ExoIII, and so we hope to elucidate its nucleotide preferences thoroughly.
For methylated substrates, we observed that resection is delayed for lower concentrations of ExoIII and are inhibited slightly by the presence of multiple methylcytosines. The rate of resection, however, remains consistent on all substrates. At higher concentrations, ExoIII does not appear to distinguish the methylcytosines. T7 Exo does not show any alteration in activity from the methyl groups. Its host, E. coli, contains a small percentage of methylated adenines and cytosines, and it appears that T7 Exo does not discriminate against them. This is in spite of a smaller percentage of methylated DNA ending up in the T7 bacteriophage’s progeny DNA than is present in the E. coli genome74.
While this assay is predominantly useful for studying processive enzymes, it is possible to combine a nickase with an enzyme that resects from nicks, as indicated with nickase Nt.CviPII in conjunction with either ExoIII or T7 Exo. This is a powerful method to identify nicking or endonuclease activities, and study their efficiency based on when resection commences. The superior sensitivity of PG in this assay also expanded our repertoire of enzymes to include ssDNA nucleases, such as Trex2. Trex2 is one of at least eight autonomous exonucleases in human cells, and is likely recruited to 3′-termini to alleviate blocks during replication arrest75. It binds DNA very tightly, and this affinity for its substrate has been captured here due to its very rapid processivity. In addition to the study of enzymes that digest DNA, we extended our study to enzymes that polymerise DNA, such as the nuclease-deficient Klenow fragment polymerase. Its polymerase activity is ten-fold more rapid, for example, than ExoIII at resection in their respective buffers. We further explored the fluorescent dye QI which, unlike PG, recognises RNA polynucleotides. The activities of RNase A and H were captured in real-time, where we recapitulated their known activities on ssRNA and the RNA strand of RNA:DNA heteroduplexes, respectively.
It is worth noting, that our methodology has proven versatile when tested under differing salt concentrations and temperatures. For example, we tested Trex2 in NEB Cutsmart buffer and compared our results to its activity in Trex2 specific buffer66. Trex2 proved to be functional in both cases with a slightly better activity in the latter buffer. The latter buffer was ultimately used in the published Trex2 figures. In addition, we also observed that both T7 and ExoIII had comparable activity in their recommended buffers and the Cutsmart buffer used for the nicked-substrate assays. Our methodology also proved to be resilient to differences in protein batch preparations and variations in temperatures. We have benchmarked at least two different batches of either T7 or ExoIII and each of the batches provided comparable results with minimal variations across preparations. We also performed our assays at optimal 37 °C and sub-optimal room temperatures with both showing activity albeit with differing rates of resection. That is why we believe our assay is sensitive and robust enough to combine various DNA processing enzymes and/or perform enzymatic reactions under a wide range of biochemical conditions.
Characterisation of DNA nucleases is integral for demystifying their roles in maintenance of genomic integrity. Loss of nucleases, or mutations in their structural or functional domains, can have disastrous effects on the health of an organism. The impact of these mutations could affect resection rates or binding affinity to the DNA or interacting partners, and we posit that this assay may be sensitive enough to capture and compare these characteristics71,76,77. Many nucleases have been well-characterised, including those used in the optimisation of this assay, while many more have yet to be characterised at all.
Nucleases may also represent anticancer targets, and this assay could offer an alternative method for studying the effect of future anticancer drugs on the activity of their target nuclease78. In a similar instance, a discontinuous assay using PG was successfully performed to study the inhibitory role of actin on DNase I31. As such, this assay represents a safe, easy, rapid, robust, real-time study of dsDNA and ssDNA nucleases and polymerases. We believe that it has the potential to revolutionise quantitative assessment of DNA and/or RNA cleaving enzymes in a vast range of applications.
Bartosova, Z. & Krejci, L. Nucleases in homologous recombination as targets for cancer therapy. FEBS Lett. 588, 2446–2456 (2014).
Rigby, R. E. & Rehwinkel, J. RNA degradation in antiviral immunity and autoimmunity. Trends Immunol. 36, 179–88 (2015).
Paull, T. T. & Deshpande, R. A. The Mre11/Rad50/Nbs1 complex: recent insights into catalytic activities and ATP-driven conformational changes. Exp. Cell Res. 329, 139–47 (2014).
Makharashvili, N. & Paull, T. T. CtIP: A DNA damage response protein at the intersection of DNA metabolism. DNA Repair (Amst). 32, 75–81 (2015).
Kosinski, J., Feder, M. & Bujnicki, J. M. The PD-(D/E)XK superfamily revisited: identification of new members among proteins involved in DNA metabolism and functional predictions for domains of (hitherto) unknown function. BMC Bioinformatics 6, 172 (2005).
Babbs, C. et al. Homozygous mutations in a predicted endonuclease are a novel cause of congenital dyserythropoietic anemia type I. Haematologica 98, 1383–1387 (2013).
Silva, S., Homolka, D. & Pillai, R. S. Characterization of the mammalian RNA exonuclease 5/NEF-sp as a testis-specific nuclear 3′ → 5′ exoribonuclease. RNA 23, 1385–1392 (2017).
Guan, R.-B. et al. A nuclease specific to lepidopteran insects suppresses RNAi. J. Biol. Chem. 293, 6011–6021 (2018).
Claeys Bouuaert, C. & Keeney, S. Distinct DNA-binding surfaces in the ATPase and linker domains of MutLγ determine its substrate specificities and exert separable functions in meiotic recombination and mismatch repair. PLOS Genet. 13, e1006722 (2017).
Anand, R., Ranjha, L., Cannavo, E. & Cejka, P. Phosphorylated CtIP Functions as a Co-factor of the MRE11-RAD50-NBS1 Endonuclease in DNA End Resection. Mol. Cell 64, 940–950 (2016).
Nowotny, M., Gaidamakov, S. A., Crouch, R. J. & Yang, W. Crystal structures of RNase H bound to an RNA/DNA hybrid: substrate specificity and metal-dependent catalysis. Cell 121, 1005–16 (2005).
Wyatt, H. D. M., Laister, R. C., Martin, S. R., Arrowsmith, C. H. & West, S. C. The SMX DNA Repair Tri-nuclease. Mol. Cell 65, 848–860.e11 (2017).
Abdullah, U. B. et al. RPA activates the XPF‐ERCC1 endonuclease to initiate processing of DNA interstrand crosslinks. EMBO J. 36, 2047–2060 (2017).
Mitsunobu, H., Zhu, B., Lee, S.-J., Tabor, S. & Richardson, C. C. Flap endonuclease activity of gene 6 exonuclease of bacteriophage T7. J. Biol. Chem. 289, 5860–75 (2014).
Buel, E. & Schwartz, M. The use of DAPI as a replacement for ethidium bromide in forensic DNA analysis. J. Forensic Sci. 40, 275–8 (1995).
Schmidt, F. et al. DNA Staining in Agarose Gels with ZN 2+-Cyclen-Pyrene. Nucleosides, Nucleotides and Nucleic Acids 29, 748–759 (2010).
Gallagher, S. R. Quantitation of DNA and RNA with Absorption and Fluorescence Spectroscopy. In Current Protocols in Immunology 116, A.3L.1-A.3L.14 (John Wiley & Sons, Inc., 2017).
Bruijns, B., Tiggelaar, R. & Gardeniers, H. Dataset of the absorption, emission and excitation spectra and fluorescence intensity graphs of fluorescent cyanine dyes for the quantification of low amounts of dsDNA. Data Br. 10, 132–143 (2017).
Su, X. et al. Simultaneous Fluorescence Imaging of the Activities of DNases and 3′ Exonucleases in Living Cells with Chimeric Oligonucleotide Probes. Anal. Chem. 85, 9939–9946 (2013).
Zhou, Z., Zhu, C., Ren, J. & Dong, S. A graphene-based real-time fluorescent assay of deoxyribonuclease I activity and inhibition. Anal. Chim. Acta 740, 88–92 (2012).
Sato, S. et al. Electrochemical assay for deoxyribonuclease I activity. Anal. Biochem. 381, 233–239 (2008).
Hillier, S. C. et al. An electrochemical study of enzymatic oligonucleotide digestion. Bioelectrochemistry 63, 307–310 (2004).
Sato, S. et al. Reliable ferrocenyloligonucleotide-immobilized electrodes and their application to electrochemical DNase I assay. Anal. Chim. Acta 645, 30–35 (2009).
Ding, J. & Qin, W. Potentiometric sensing of nuclease activities and oxidative damage of single-stranded DNA using a polycation-sensitive membrane electrode. Biosens. Bioelectron. 47, 559–565 (2013).
Ye, Y. et al. Direct Electrochemical Monitoring of RNase Activity. Electroanalysis 20, 919–922 (2008).
Sato, S. & Takenaka, S. Highly sensitive nuclease assays based on chemically modified DNA or RNA. Sensors (Basel). 14, 12437–50 (2014).
Georgiou, C. D., Papapostolou, I. & Grintzalis, K. Protocol for the quantitative assessment of DNA concentration and damage (fragmentation and nicks). Nat. Protoc. 4, 125–131 (2009).
Costa, F. et al. Seminal cell-free DNA levels measured by PicoGreen fluorochrome are associated with sperm fertility criteria. Zygote 25, 111–119 (2017).
Blotta, I., Prestinaci, F., Mirante, S. & Cantafora, A. Quantitative assay of total dsDNA with PicoGreen reagent and real-time fluorescent detection. Ann. Ist. Super. Sanita 41, 119–23 (2005).
Singer, V. L., Jones, L. J., Yue, S. T. & Haugland, R. P. Characterization of PicoGreen Reagent and Development of a Fluorescence-Based Solution Assay for Double-Stranded DNA Quantitation. Anal. Biochem. 249, 228–238 (1997).
Choi, S. J. & Szoka, F. C. Fluorometric determination of deoxyribonuclease I activity with PicoGreen. Anal. Biochem. 281, 95–97 (2000).
McKnight, R. E., Gleason, A. B., Keyes, J. A. & Sahabi, S. Binding mode and affinity studies of DNA-binding agents using topoisomerase I DNA unwinding assay. Bioorg. Med. Chem. Lett. 17, 1013–1017 (2007).
Tveit, H. & Kristensen, T. Fluorescence-based DNA polymerase assay. Anal. Biochem. 289, 96–98 (2001).
Driscoll, M. D., Rentergent, J. & Hay, S. A quantitative fluorescence-based steady-state assay of DNA polymerase. FEBS J. 281, 2042–50 (2014).
Nasiri, H. R., Kiss, L. & Krämer, J. A fluorescence polarization based assay for the identification and characterization of polymerase inhibitors. Bioorg. Med. Chem. Lett. 26, 4433–4435 (2016).
Gelmini, S. et al. Rapid, quantitative nonisotopic assay for telomerase activity in human tumors. Clin. Chem. 44, 2133–8 (1998).
Koepsell, S. A., Hanson, S., Hinrichs, S. H. & Griep, M. A. Fluorometric assay for bacterial primases. Anal. Biochem. 339, 353–355 (2005).
Rentergent, J., Driscoll, M. D. & Hay, S. Time Course Analysis of Enzyme-Catalyzed DNA Polymerization. Biochemistry 55, 5622–5634 (2016).
Lovett, S. T. The DNA Exonucleases of Escherichia coli. EcoSal Plus 4 (2011).
Chen, M.-J., Ma, S.-M., Dumitrache, L. C. & Hasty, P. Biochemical and cellular characteristics of the 3′ -> 5′ exonuclease TREX2. Nucleic Acids Res. 35, 2682–2694 (2007).
Ponnaluri, V. K. C. et al. NicE-seq: high resolution open chromatin profiling. Genome Biol. 18, 122 (2017).
Grin, I. & Ishchenko, A. A. An interplay of the base excision repair and mismatch repair pathways in active DNA demethylation. Nucleic Acids Res. 44, 3713–27 (2016).
Bellaousov, S., Reuter, J. S., Seetin, M. G. & Mathews, D. H. RNAstructure: web servers for RNA secondary structure prediction and analysis. Nucleic Acids Res. 41, W471–W474 (2013).
Harmon, F. G. & Kowalczykowski, S. C. RecQ helicase, in concert with RecA and SSB proteins, initiates and disrupts DNA recombination. Genes Dev. 12, 1134–44 (1998).
Weiss, B. Endonuclease II of Escherichia coli is Exonuclease III. J. Biol. Chem. 251, 1896–1901 (1976).
Henikoff, S. Ordered deletions for DNA sequencing and in vitro mutagenesis by polymerase extension and exonuclease Ill gapping of circular templates. Nucleic Acids Res. 18,(1990).
Henikoff, S. Unidirectional digestion with exonuclease III creates targeted breakpoints for DNA sequencing. Gene 28, 351–9 (1984).
Ren, B., Zhou, J.-M. & Komiyama, M. Straightforward detection of SNPs in double-stranded DNA by using exonuclease III/nuclease S1/PNA system. Nucleic Acids Res. 32, e42 (2004).
Tao, C. et al. A new mode for highly sensitive and specific detection of DNA based on exonuclease III-assisted target recycling amplification and mismatched catalytic hairpin assembly. Chem. Commun. (Camb). 51, 4220–2 (2015).
Tubbs, A. & Nussenzweig, A. Endogenous DNA Damage as a Source of Genomic Instability in Cancer, https://doi.org/10.1016/j.cell.2017.01.002 (2017).
Hsieh, P. & Zhang, Y. The Devil is in the details for DNA mismatch repair. https://doi.org/10.1073/pnas.1702747114.
Helleday, T., Lo, J., Vangent, D. & Engelward, B. DNA double-strand break repair: From mechanistic understanding to cancer treatment. DNA Repair (Amst). 6, 923–935 (2007).
Krokan, H. E. & Bjørås, M. Base excision repair. Cold Spring Harb. Perspect. Biol. 5, a012583 (2013).
Bessho, T., Sancar, A., Thompson, L. H. & Thelen, M. P. Reconstitution of human excision nuclease with recombinant XPF-ERCC1 complex. J. Biol. Chem. 272, 3833–7 (1997).
Franchini, D.-M. et al. Processive DNA Demethylation via DNA Deaminase-Induced Lesion Resolution. PLoS One 9, e97754 (2014).
Okano, M., Xie, S. & Li, E. Cloning and characterization of a family of novel mammalian DNA (cytosine-5) methyltransferases. Nat. Genet. 19, 219–220 (1998).
Gowher, H. & Jeltsch, A. Enzymatic properties of recombinant Dnmt3a DNA methyltransferase from mouse: the enzyme modifies DNA in a non-processive manner and also methylates non-CpA sites. J. Mol. Biol. 309, 1201–1208 (2001).
Linxweiler, W. & Hörz, W. Sequence specificity of exonuclease III from E. coli. Nucleic Acids Res. 10, 4845–4859 (1982).
Grasby, J. A., Finger, L. D., Tsutakawa, S. E., Atack, J. M. & Tainer, J. A. Unpairing and gating: sequence-independent substrate recognition by FEN superfamily nucleases. Trends Biochem. Sci. 37, 74–84 (2012).
Shinozaki, K. & Okazaki, T. T7 gene 6 exonuclease has an RNase H activity. Nucleic Acids Res. 5, 4245–61 (1978).
Wu, Z.-K. et al. Single-base mismatch discrimination by T7 exonuclease with target cyclic amplification detection. Chem. Commun. Chem. Commun 51, 2954–2956 (2954).
Uphoff, S., Reyes-Lamothe, R., Garza de Leon, F., Sherratt, D. J. & Kapanidis, A. N. Single-molecule DNA repair in live bacteria. Proc. Natl. Acad. Sci. USA 110, 8063–8 (2013).
Masamune, Y., Fleischman, R. A. & Richardson, C. C. Enzymatic Removal and Replacement of Nucleotides at Single Strand Breaks in Deoxyribonucleic Acid. J. Biol. Chem. 246, 2680–2691 (1971).
Guan, C. & Kumar, S. A single catalytic domain of the junction-resolving enzyme T7 endonuclease I is a non-specific nicking endonuclease. Nucleic Acids Res. 33, 6225–34 (2005).
Mazur, D. J. & Perrino, F. W. Identification and expression of the TREX1 and TREX2 cDNA sequences encoding mammalian 3′–>,5′ exonucleases. J. Biol. Chem. 274, 19655–60 (1999).
Mazur, D. J. & Perrino, F. W. Excision of 3′ termini by the Trex1 and TREX2 3′–>,5′ exonucleases. Characterization of the recombinant proteins. J. Biol. Chem. 276, 17022–9 (2001).
Takahashi, S., Brazier, J. A. & Sugimoto, N. Topological impact of noncanonical DNA structures on Klenow fragment of DNA polymerase, https://doi.org/10.1073/pnas.1704258114.
Tolun, G. A real-time DNase assay (ReDA) based on PicoGreen(R) fluorescence. Nucleic Acids Res. https://doi.org/10.1093/nar/gng111 (2003).
Koba, M., Szostek, A. & Konopa, J. Limitation of usage of PicoGreen dye in quantitative assays of double-stranded DNA in the presence of intercalating compounds. Acta Biochim. Pol (2007).
Pan, C. Q., Ulmer, J. S., Herzka, A. & Lazarus, R. A. Mutational analysis of human DNase I at the DNA binding interface: Implications for DNA recognition. catalysis, and metal ion dependence. Prorein Sci. 7, 628–636 (1998).
Pan, C. Q. & Lazarus, R. A. Hyperactivity of human DNase I variants. Dependence on the number of positively charged residues and concentration, length, and environment of DNA. J. Biol. Chem. 273, 11701–8 (1998).
Taylor, A. F. & Weiss, B. Role of exonuclease III in the base excision repair of uracil-containing DNA. J. Bacteriol. 151, 351–7 (1982).
Samejima, K. & Earnshaw, W. C. Trashing the genome: the role of nucleases during apoptosis. Nat. Rev. Mol. Cell Biol. 6, 677–688 (2005).
Britain, G. Is the DNA of Virus T7 Methylated? J. Gen. Virol. 4, 609–613 (1979).
Perrino, F. W., Harvey, S., McMillin, S. & Hollis, T. The human TREX2 3′ → 5′-exonuclease structure suggests a mechanism for efficient nonprocessive DNA catalysis. J. Biol. Chem. 280, 15212–8 (2005).
Myler, L. R. et al. Single-Molecule Imaging Reveals How Mre11-Rad50-Nbs1 Initiates DNA Break Repair. Mol. Cell 67, 891–898.e4 (2017).
Mitsunobu, H., Zhu, B., Lee, S.-J., Tabor, S. & Richardson, C. C. Flap endonuclease of bacteriophage T7: Possible roles in RNA primer removal, recombination and host DNA breakdown. Bacteriophage 4, e28507 (2014).
Kumar, S. et al. Inhibition of DNA2 nuclease as a therapeutic strategy targeting replication stress in cancer cells. Oncogenesis 6, e319–e319 (2017).
We are grateful to Dr. Mirella Vivoli for her insight in the early development of this assay; and to Prof Fulvia Bono for her insight on RNA nucleases and her support of this project. We are also very thankful to Adam Thomas (University of Exeter) for his knowledge and guidance on the data analysis. We also thank Prof Matthew Scharff, Dr. Shanzhi Wang, and Dr. Michael Dillon for helpful suggestions. Funding for RC was provided by BBSRC [BB/N017773/1], Royal Society [IE150290], and Academy of Medical Sciences [SBF001\1005]. ECS is funded by a PhD studentship from BBSRC [BB/J014400/1].
The authors declare no competing interests.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Sheppard, E.C., Rogers, S., Harmer, N.J. et al. A universal fluorescence-based toolkit for real-time quantification of DNA and RNA nuclease activity. Sci Rep 9, 8853 (2019). https://doi.org/10.1038/s41598-019-45356-z
SLAS DISCOVERY: Advancing the Science of Drug Discovery (2021)