Polymeric nanoparticles as an alternative for application of gibberellic acid in sustainable agriculture: a field study

Nanocarrier systems for the encapsulation of agrochemicals can contribute to sustainable agriculture, but few nanosystems have been developed for plant growth regulators (PGRs). The present study evaluated the effects of seed priming using alginate/chitosan (nanoALG/CS) and chitosan/tripolyphosphate (nanoCS/TPP) containing GA3 on the growth and productivity of Solanum lycopersicum cultivated under field conditions. The results demonstrated that nanocarrier systems could improve fruit production, with the productivity increasing almost 4-fold using nanoALG/CS-GA3. This pioneering study demonstrates the potential of nanocarrier systems with PGRs for applications in agriculture.

In agriculture, seed vigor is essential for germination and the rapid growth of robust seedlings, leading to satisfactory yields 12 . Diverse types of seed pretreatments employing a limited amount of water (collectively called seed priming) are used to improve the metabolic activity prior to germination, such as osmotic conditioning (hydration followed by drying) and hormone priming 13,14 . The advantages of these treatments include increased emergence, enhanced ability to compete with weeds for resources, better development under stress conditions, improved resistance to pathogens, and increased yields 14 . Many studies have demonstrated the beneficial effects of seed pretreatment with GA 3 in different crops, including increased productivity of Triticum aestivum under drought and unstressed conditions 15 , increased water uptake by seeds of Beta vulgaris under saline conditions 16 , shorter emergence time of Glycine max seedlings 17 , and increased plant weight and yield of Helianthus annuus 18 .
However, it is important to apply GA 3 at a suitable concentration and at the correct time, in order to avoid adverse effects on plant development and crop yield 19 . In a study with Leymus chinensis, Ma et al. 20 reported the biphasic effect of GA 3 seed priming on development of the grass. The aboveground biomass increased up to the optimum GA 3 concentration (50 µM), above which the effect of the hormone decreased. In this way, the use of nanocarrier systems for GA 3 could enable slow and sustained release of the active agent, avoiding the attainment of supra-optimal levels. In addition, the nanoencapsulation could improve the solubility of GA 3 and protect it from degradation [21][22][23] .
There have been few studies concerning the development of nanocarrier systems for PGRs such as brassinosteroids, O-naphthyl acetyl, and GA 3 [21][22][23][24] . According to Yang et al. 22 , an inclusion complex of GA 3 with cyclodextrins enhanced the chemical stability of the hormone and increased the growth of mung bean and cucumber seedlings. In studies using alginate/chitosan (ALG/CS) and chitosan/tripolyphosphate (CS/TPP) nanocarrier systems containing GA 3 , it was shown that the treatment of seeds led to beneficial effects in the development of Phaseolus vulgaris plants. After seven days, the seedlings showed increases of root development, leaf area, and photosynthetic pigments, compared to use of the hormone. The results demonstrated that these systems were able to improve the vigor of seeds of P. vulgaris 21,23 . However, these studies did not investigate the potential of the nanocarrier systems under field conditions. This study describes the results obtained for two chitosan-based nanoparticle systems loaded with GA 3 . Seeds of Solanum lycopersicum var. cerasiforme were treated with chitosan/tripolyphosphate and alginate/chitosan nanoparticles containing GA 3 (nanoCS/TPP-GA 3 and nanoALG/CS-GA 3 , respectively), and evaluation was made of the effects on plant growth and fruit production under field conditions. It should be highlighted that there have been no previous studies reported in the literature that have investigated the growth of plants following application of a natural plant growth regulator associated with biodegradable polymer nanoparticles prepared without the use of organic solvents. These new systems offer benefits for use in sustainable agricultural production practices.

Materials and Methods
Materials. Chitosan (MW 27 kDa), sodium alginate, and the GA 3 plant hormone were obtained from Sigma-Aldrich. Seeds of Solanum lycopersicum var. cerasiforme were removed from fruits purchased in a local market in São Paulo (Brazil) and were dried at room temperature. preparation of nanoparticles. The CS nanoparticle formulations were prepared with a final GA 3 concentration of 0.05 mg/mL. The formulations were characterized in an earlier study by dynamic light scattering (DLS), nanoparticle tracking analyses (NTA), and atomic force microscopy (AFM) 21 . The nanoALG/CS nanoparticles presented a size of 450 nm, PDI of 0.3, and zeta potential of −29 mV, while the nanoCS/TPP particles presented a size of 195 nm, PDI of 0.3, and zeta potential of +27 mV 21 . The GA 3 encapsulation efficiencies were 100% (nano-ALG/CS) and 90% (nanoCS/TPP) 21 .
NanoCS/TPP-GA 3 . An aqueous solution of 10 mL of CS (0.2%, pH 4.5) containing 0.6% acetic acid was kept under vigorous stirring. GA 3 was added, with agitation until complete dissolution, followed by slow addition of 6 mL of TPP solution (0.1%, pH 4.5 at 4 °C), using a pipette. The final formulation was a colloidal dispersion that was kept under stirring for a further 20 minutes.
NanoALG/CS-GA 3 . Firstly, 59 mL of an aqueous solution of ALG (0.063%, pH 4.9) was kept under stirring and 3.75 mL of an aqueous solution of CaCl 2 (50 mM) was added over a period of 1 hour, using a peristaltic pump. Subsequently, GA 3 was added, with agitation until complete dissolution. The ALG/CaCl 2 /GA 3 solution was kept under agitation and 12.5 mL of an aqueous solution of CS (0.07%, pH 4.5) was added over a period of 1.5 hours, using a peristaltic pump, resulting in the formation of a colloidal dispersion. treatment of the seeds. The seeds were pretreated using GA 3 , nanoCS/TPP-GA 3 , and nanoALG/CS-GA 3 at concentrations of 0.05 mg/mL (stock formulation) and dilutions of 0.005 mg/mL (1:10) and 0.0005 mg/mL (1:100). The controls were distilled water and aqueous solutions of TPP (0.03%, m/v), CS (0.12%, m/v), and ALG (4.9 × 10 −4 %, m/v) (these concentrations were the same as those of the final colloidal dispersions of nanoparticles). Dilutions of the nanoALG/CS-GA 3 nanoparticles were performed with a solution of CaCl 2 (2.5 mM), while the CS/TPP nanoparticles were diluted with a solution of TPP (0.03%, m/v). These concentrations were employed as controls and for dilution of the nanoparticles, since the same concentrations of CaCl 2 and TPP were used for the nanoparticles in the colloidal dispersions.
For the seed priming process, 50 seeds per treatment were placed in 50 mL Erlenmeyer flasks containing 10 mL of each solution, with agitation overnight for 12 hours, in the dark, at room temperature. After the treatment period, the seeds were sown in germination trays containing Carolina substrate (composed of peat, vermiculite, www.nature.com/scientificreports www.nature.com/scientificreports/ limestone, and agricultural gypsum) and left for 30 days in a greenhouse. Twelve seedlings were removed for obtaining data on the initial growth, considering the root and shoot lengths (cm) and dry weight (mg).
transfer to the soil. After 30 days, 12 seedlings from each treatment were transferred to the soil and kept for a further 90 days in the greenhouse at an average temperature of 25-35 °C. The field experiment was conducted in the city of São Miguel Arcanjo (São Paulo State, Brazil). The region is located in a subtropical zone and during the experiment, the temperature ranged from 20 to 30 °C, with relative humidity of around 40%. The soil of the region is classified as clayey. The seedlings were planted in soil previously prepared with organic fertilizer, with a spacing of 20 cm between the plants. After 90 days, measurements were made of the shoot length (m), shoot fresh and dry masses (g), number of fruits per plant, and fruit weight (g). The dry weight was determined after keeping the plants in an oven at 60 °C for 7 days. The number of fruits considered the total produced by each plant and the fruit weight was obtained by weighing 50 fresh tomatoes. productivity estimation. The productivity was calculated as the fruit fresh weight produced per hectare, considering that each plant was cultivated in an area of 0.5 m 2 .
Efficacy of the biological effect. The efficacies of the nanocarrier systems were evaluated by comparing the results obtained for the nanoparticles containing GA 3 and GA 3 , at equivalent concentrations. The data were treated according to Eq. 1.
where, BE NPS is the biological effect caused by the treatment with the nanoparticles, NPs (effect) is the result obtained for the evaluated parameters after treatment with the nanocarrier system containing GA 3 , and GA 3(effect) is the result obtained using GA 3 . The results are expressed as % biological efficacy. statistical analysis. The data obtained were treated by calculation of the means and standard deviations (n = 12), followed by analysis of variance (ANOVA) with Tukey's post-hoc test (p < 0.05), using GraphPad Prism 5.01 software.

Results and Discussion
Initial development (30 days). Seed pretreatments are used to improve the synchrony of germination and increase seed vigor due to the activation of metabolic processes 25 . To this end, nanocarrier systems can provide a mean for increasing the effectiveness of the treatment and promoting greater seed vigor. In all cases, the average germination rate was 90% in a total of 50 seeds, with no differences among the treatments (results not shown). Figure 1 shows the effects of the seed treatments on seedling development, 30 days after germination. At the 100-fold dilution, the nanoALG/CS-GA 3 formulation was able to increase the shoot length and dry weight by 38 and 107%, respectively, compared to the control (Fig. 1a,b). These parameters of plants whose seeds were treated with nanoALG/CS-GA 3 were also higher than those from seeds treated using GA 3 at the same concentration. For GA 3 at 100-fold dilution, the only significant effect, compared to the control, was a 52% increase of shoot dry weight (Fig. 1b). The use of nanoCS/TPP carriers loaded with GA 3 resulted only in a 32% increase in shoot length, which did not differ from the treatment with GA 3 (Fig. 1a). The use of the nanoALG/CS carrier alone (without GA 3 ), diluted 100-fold, also resulted in a 29.3% increase in shoot length, compared to the control (water) (Fig. 1a).
At higher concentrations, using the stock formulation and the 10-fold dilution, treatment with GA 3 increased shoot length by 33.7 and 26.5%, respectively, compared to the control (water), with the effects being significantly greater than those achieved for both nanoparticles loaded with GA 3 at the same concentrations (Fig. 1a). In addition, the stock formulation of GA 3 led to higher shoot dry weight, compared to the control (Fig. 1b). None of the analyzed parameters was affected by the treatments with the nanoformulations at higher concentrations (stock formulation and 10-fold dilution) (Fig. 1a,b).
The different treatments showed no effects on main root length (Fig. 1c). However, treatment using nano-ALG/CS-GA 3 diluted 100-fold resulted in a 113% increase in root dry weight, while use of GA 3 did not affect this parameter, demonstrating a clear effect of this carrier system loaded with GA 3 (Fig. 1d). The results considered the entire root weight (including the main and lateral roots).
Overall, these results demonstrated that the concentration was an important factor that influenced the biological effects of the different formulations. The effects of the nanoformulations on early growth of the seedlings were observed only at the lowest concentration, whereas the effects of GA 3 occurred when the stock formulation and the 10-fold dilution were used. This observation could be explained by the direct contact of GA 3 present in the medium with the seeds, which did not occur for the GA 3 in the nanoparticles, since the active agent was encapsulated within the polymeric wall and was therefore released more slowly during the seed priming process (which lasted 12 hours). In previous studies, it was shown that the total release of GA 3 occurred within 24 hours in water (under sink dilution conditions), with factors such as pH and temperature affecting the release profile 21 . However, the behavior could be different after seed exposure, since interaction with the seed components could alter the release profile. Furthermore, some nanoparticles could have remained attached to the seed surface, maintaining the delivery of GA 3 to the seeds after the priming process. Possible uptake of the nanoparticles by the seeds and subsequent release within the plant tissues should also be considered. The uptake of nanomaterials by seeds was reported by Khodakovskaya et al. 26 , who found that carbon nanotubes were able to penetrate tomato seeds, resulting in increased seed germination and plant development. Our earlier work showed that use of these nanocarrier systems led to greater vigor of seeds of Phaseolus vulgaris, resulting in increased rates of germination 21 . In the (2019) 9:7135 | https://doi.org/10.1038/s41598-019-43494-y www.nature.com/scientificreports www.nature.com/scientificreports/ present study, the tomato seeds germinated successfully and rapidly, even in the case of the control seeds treated with water. Hence, there were no observable differences in the effects of the different treatments. Further studies should therefore be undertaken to test the effects of the nanoformulations on seeds presenting dormancy or low germination rates, which could lead to novel applications of these nanoformulations for obtaining faster and more uniform emergence.
In the initial evaluation, it was demonstrated that the most effective treatment for plant development was nanoALG/CS-GA 3 used at a 100-fold dilution, which increased the shoot and root dry weights. The nanoCS/ TPP-GA 3 formulation showed relatively low biological activity during the initial growth of the tomato seedlings, even when compared with GA 3 .
Previous studies have shown that different nanomaterials may have agricultural applications. For example, metallic or carbon nanomaterials have been used to increase the germination and initial development of plants, aiming at future applications as nutritional supplements or stimulants 7,27 . The uptake of nanoparticles by plants can lead to their accumulation in different plant tissues, with potential undesirable effects in the short or long term 27 .
One of the great advantages of using biodegradable polymer systems, instead of the systems mentioned above, is that they can be used in the metabolism of living organisms. An important point is that neither nanoCS/ TPP-GA 3 nor nanoALG/CS-GA 3 showed any phytotoxic effects during the stages of germination and initial growth of the tomato plants, even at high concentrations.
The nanoparticles used in this study were mainly composed of CS and ALG, which are edible nontoxic polymers employed in various pharmaceutical and agricultural applications, and can avoid adverse effects such as bioaccumulation. Another point is that the production of the nanoparticles did not involve the use of organic solvents, so the systems were produced entirely from biodegradable materials and were loaded with an active agent that is a plant metabolite. Therefore, biopolymer-based formulations are suitable for use in the development of more sustainable agricultural practices. www.nature.com/scientificreports www.nature.com/scientificreports/ Other polymers such as poly(lactic-co-glycolic acid) (PLGA), poly(epsilon-caprolactone) (PCL), and zein have shown potential for use in the development of nano-based delivery systems for plants [28][29][30] . It has been found that PLGA nanoparticles can be taken up by roots and by stomata in the leaves, and can be transported through the vascular system 29 . These nanoparticles can adhere strongly to the outer side of the cell wall, due to electrostatic interactions, and were found to be able to enter grapevine cells by clathrin-dependent or clathrin-independent endocytosis 30 . In the case of PCL nanoparticles, entry into the mesophyll can also occur through stomatal pores and hydathodes 31 . Prasad et al. 32 reported that zein nanoparticles were internalized by the roots and were transported to different plant organs. Since such nanoparticles can penetrate the plant tissue, they may be transported within the roots by apoplastic and symplastic pathways, which are involved in the uptake of water and nutrients 27 .
In the case of seeds, the surfaces possess pores whose selective permeability restricts the uptake of solids or particles. However, intracellular spaces in the parenchyma tissue may be filled with liquid media that facilitate the transfer of nutrients or particles to the embryo, and another mechanism of particle entry into seeds is through aquaporins 27 .
Plant development (120 days). After 120 days, the plants were collected and analyses were made of the shoot length, the shoot dry weight, and the number and weight of the fruits.
The shoot length of plants from seeds treated with nanoALG/CS-GA 3 was greater than for plants from seeds treated with GA 3 (Fig. 2a). For the treatments with the stock formulation and the 10-and 100-fold dilutions, the use of nanoALG/CS-GA 3 resulted in increases of 45, 63, and 61%, respectively, relative to the water control, compared to increases of 11.6, 18.9, and 40.32% obtained using GA 3 . The shoot length was also affected by the treatments with CaCl 2 (16.3% increase), TPP (17.14%), ALG (25.3%), CS (26.5%), and nanoparticles without GA 3 .
Several factors could explain the observed effects. For example, the Ca 2+ ion is a messenger species involved in many cell signaling processes related to stress and hormonal regulation in plants. For this reason, treatment of seeds with CaCl 2 has been reported to alleviate the negative effects of abiotic stresses and enhance plant growth 33 . www.nature.com/scientificreports www.nature.com/scientificreports/ Biopolymers such as CS can form thin semi-permeable films around seeds, acting to maintain humidity and consequently promote germination. Polymers can also alter seed metabolism, improving the mechanisms of defense against pathogens and increasing the vigor of seedlings 34 .
In the present case, improved effects were observed for the treatments using nanoALG/CS-GA 3 , reflecting the greater efficiency achieved when the active agent was encapsulated. In addition, previous studies have found that the chitosan polymer mixed in soil can enhance plant growth and act as a growth stimulator [35][36][37] . Some nanomaterials can influence seed vigor, which has been attributed to the generation of increased numbers of pores on the seed surface, resulting in greater water penetration and uptake of nutrients from the soil 26,38 .
The treatments with nanoCS/TPP-GA 3 using the stock formulation and the 10-fold dilution increased the shoot dry weight by 208 and 81%, respectively (Fig. 2b). These increases were significantly different to those achieved with GA 3 , for which the weight increases were only 32 and 47%, compared to the control (water). These results indicated greater long-term biological efficacy of nanoCS/TPP-GA 3 , compared to GA 3 . In terms of fruit production (Fig. 2c), treatments using the nanoparticle stock formulations significantly increased the number of fruits, with increases of 225.5% (nanoCS/TPP-GA 3 ) and 178.8% (nanoALG/CS-GA 3 ), relative to the control (water), compared to an increase of 101% for the treatment with GA 3 .
When the concentration of nanoCS/TPP-GA 3 was reduced, there were no differences in the number of fruits per plant, relative to the control (water). However, at 10-fold dilution, the nanoALG/CS-GA 3 system maintained high fruit production, with an increase of 151.2%, compared to 72.0% for GA 3 . Increased fruit production was also observed using the formulations at 100-fold dilution, with increases of 81.2% for nanoALG/CS-GA 3 and 105% for GA 3 , relative to the control (water). Hence, both formulations were still able to increase fruit production, even after substantial dilution. However, nanoCS/TPP-GA 3 at 100-fold dilution did not induce an increase of fruit number. The results for fruit production are summarized in Table 1.
In terms of average fruit weight, most of the treatments presented no significant differences relative to the control (water), although the use of nanoALG/CS-GA 3 resulted in a 30% increase in fruit fresh weight (Fig. 2d).
The high efficiency of chemical agents delivered using carrier systems has been attributed to greater solubility of the substance, protection against degradation, and prolonged release 2,6,22 . However, other factors are also involved, including the characteristics of the nanoparticles (size, polydispersity index, and zeta potential) and the ways in which they interact with the plant, indicating the importance of evaluating different carrier systems.
An especially interesting feature was that the nanocarrier systems acted to increase the long-term effect of GA 3 on the development and production of the tomato plants, when the stock or 10-fold dilution formulations were used. It should be noted that the empty nanocarrier systems did not present any effects on fruit production, while loading of GA 3 in the nanocarriers acted to increase the activity of the plant hormone, according to mechanisms that remain to be elucidated. seed priming to increase tomato productivity. The CS nanoparticles showed considerable potential for application in agriculture. The gain provided by nanoencapsulation was evaluated by calculation of the fruit productivity (Fig. 3).
The nanoALG/CS-GA 3 and nanoCS/TPP-GA 3 treatments (stock formulations) resulted in productivities of 36.8 ± 5.6 and 30.7 ± 3.2 ton/ha, respectively, compared to 20.7 ± 1.1 ton/ha for GA 3 . All these treatments resulted in productivities that were higher than when the seeds were treated only with water (10.1 ± 2.2 ton/ha).
The productivity gains induced by nanoALG/CS-GA 3 and nanoCS/TPP-GA 3 were probably related to the GA 3 nanoencapsulation, rather than the nanoparticle constituents, given the small or absent effects induced by the treatments with unloaded nanoparticles or the isolated constituents. Even when 10-fold diluted, the nanoALG/ CS-GA 3 formulation resulted in a tomato productivity of 25.4 ± 4.4 ton/ha, while GA 3 led to a productivity of 18.7 ± 2.6 ton/ha. All treatments with GA 3 resulted in a similar productivity (around 20 ton/ha), even at 100-fold dilution, when GA 3 treatment was as effective as nanoALG/CS-GA 3 and more effective than nanoCS/TPP-GA 3 . However, in general, for most of the parameters evaluated, the nanoparticles (especially nanoALG/CS-GA 3 ) presented greater effects than GA 3 .
It is noteworthy that the effects of nanoALG/CS-GA 3 and nanoCS/TPP-GA 3 on tomato productivity were highly dependent on the concentration. The productivity of the plants whose seeds were treated with nanoALG/ CS-GA 3 increased from 17.2 to 36.8 ton/ha, when the concentration was increased from the 100-fold dilution to the stock formulation. In the case of the nanoCS/TPP-GA 3 treatments, productivity of 30.7 ton/ha was obtained when the stock formulation was used. In contrast, the effect of GA 3 on fruit productivity was not dependent on the concentration, with values close to 20 ton/ha obtained for all treatments. This fact may explain why the GA 3 was as efficient as nanoALG/CS-GA 3 and more efficient than nanoCS/TPP-GA 3 in increasing fruit productivity, when the 100-fold dilution was used. Nevertheless, for the other concentrations, the nanoALG/CS-GA 3 and Fruit production 0.5 mg/mL (stock solution) 0.05 mg/mL (10-fold dilution) 0.005 mg/mL (100-fold dilution) nanoALG/CS-GA 3 178% 151% 81% Table 1. Summary of the results for tomato fruit production (shown in Fig. 1). The data are given as % production, compared to the control (seed priming with water).
Seed coating is a methodology used to treat seeds with fungicides and insecticides, in order to protect the seeds in the first stages of development 25 . Theoretical estimation of large-scale productivity indicated that the chitosan nanoparticles containing GA 3 presented excellent potential for applications in agriculture. The polymers used to manufacture the nanoparticles are very cheap and are essentially produced using water. Moreover, the seed treatment methodology means that the seeds are ready for sowing in the field, while avoiding application of the nanoparticles to the soil and possible contamination of the environment. However, new studies are required to evaluate biosafety issues and to ensure the safe use of this technology.
Biological efficacy of treatment with the nanoparticles, compared to GA 3 . Figure 4 shows the calculated biological efficacies of the different nanocarrier formulations, in comparison with GA 3 , for the parameters evaluated 120 days after sowing.
The greatest effects on shoot length were achieved using nanoALG/CS-GA 3 , with increases of 31 and 38% for the stock colloidal dispersion and the 10-fold dilution, relative to the effects of GA 3 at the same concentrations. For plant dry weight, the biological effect of treatment with nanoCS/TPP-GA 3 (stock dispersion) was 149% greater than obtained with GA 3 , while use of nanoALG/CS-GA 3 diluted 10-fold resulted in a dry weight increase of 112%.
The results obtained for plant development (length and dry weight) demonstrated that the nanocarrier systems provided increased efficacy and activity of the plant hormone, compared to GA 3 . Seeds treated with the GA 3 stock colloidal dispersion and the 10-fold dilution showed no differences compared to the control (water-treated) seeds. However, in the case of the nanocarrier systems, dilution did not reduce the effects, and could even increase them.
The two CS-based nanocarrier systems presented different physico-chemical characteristics, which consequently influenced the release of GA 3 during the seed priming. In vitro assays showed that release from the nano-ALG/CS-GA 3 system was initially slower, while almost 100% of the active agent present within the system was released in 24 hours 21 . The nanoCS/TPP-GA 3 system presented faster initial release, but 54% of the hormone was retained within the particles after 24 hours. An important consideration is that the conditions of pH and temperature can alter the mechanism and duration of release of GA 3 21 , so further studies are needed to elucidate the nature of release of GA 3 in plants, as well as to determine how the nanocarrier systems behave within plants.
In terms of fruit production, the nanoCS/TPP-GA 3 (stock formulation) system was 64% more effective than GA 3 , while the nanoALG/CS-GA 3 system was 41 and 46% more effective than GA 3 , at dilutions of 10-and 100-fold, respectively. In contrast to nanoCS/TPP-GA 3 at the same concentration, the stock colloidal dispersion of the nanoALG/CS-GA 3 formulation was 29% more effective than GA 3 in increasing fruit weight.
The results described above demonstrated that use of the nanocarrier systems increased the biological activity of GA 3 . Seed priming with the stock formulation and the 10-fold dilution presented long-term effects including enhanced plant development and fruit production. In the case of nanoALG/CS-GA 3 , there was also an increase in the weight of the fruits.
In the field, the use of these new technological systems for seed treatment could result in higher agricultural yields. Another feature related to sustainability and food safety is that the treatment was only applied to the seeds, so there was no direct exposure of the formulations to the environment, hence avoiding any possibility of the nanoparticles becoming a source of contamination in water bodies or the soil. www.nature.com/scientificreports www.nature.com/scientificreports/ From comparison of the two nanoparticle systems, it could be seen that nanoALG/CS-GA 3 was more effective than nanoCS/TPP-GA 3 . Consistent with this result, our earlier work showed that nanoALG/CS-GA 3 was more efficient than nanoCS/TPP-GA 3 in enhancing the development of apical and lateral roots, as well as the production of photosynthetic pigments, in Phaseolus vulgaris plants 21 . The two systems presented different characteristics in terms of particle size, zeta potential, and the mechanism of GA 3 release, resulting in different biological activities. As an example, the different zeta potentials of the nanocarriers studied (−29 mV for nanoALG/CS and +27 mV for nanoCS/TPP) might have contributed to the observed differences in biological activity. Some studies have shown that the zeta potential has a crucial rule in plant-nanoparticle interaction. Nanoparticles with positive zeta potential have strong interaction with the negative groups of plant cell walls, with low internalization in the cells and a tendency for accumulation on the cell surface. In contrast, nanoparticles with negative zeta potential can be rapidly distributed and internalized into plant cells 39,40 .
Seed priming is a methodology with great potential for use in agriculture. The pretreatment is able to change the metabolism of seeds, not only improving germination and early seedling growth, but also having long-term effects on plant development, with positive impacts on productivity. Many products can be used for seed priming, including plant growth regulators, macro and micro nutrients, and microorganisms. In a recent study, Ma et al. 20 showed that the treatment of Leymus chinensis seeds with GA 3 (non-encapsulated) improved seed germination, plant development, and grass productivity. This growth-promoting effect lasted at least two years, being transmitted to clonal offspring. The authors proposed a transgenerational transmission mechanism for GA 3 priming effects in the species evaluated. Other studies have demonstrated the beneficial effects of seed priming with GA 3 on the yields of sunflower and wheat 18,41 . The molecular and physiological mechanisms by which GA 3 seed priming induces long-term effects in plants are not yet understood, although they may involve epigenetic alterations 20 . Moreover, it remains to be investigated whether exogenous GA 3 applied during the early development of the embryo could irreversibly alter the transcriptional feedback loops that finely regulate gibberellin homeostasis and signaling 42 . www.nature.com/scientificreports www.nature.com/scientificreports/ Here, we observed that GA 3 nanoencapsulation improved the long-term effect of the seed priming treatment, compared to the use of GA 3 , enhancing the impact of seed priming on tomato productivity. Given the release profiles of nanoALG/CS-GA 3 and nanoCS/TPP-GA 3 21 , nanoencapsulation did not slow down GA 3 release to such an extent that would allow delivery of the hormone until the reproductive phase. Hence, a number of different factors could have contributed to the greater development and productivity of the tomato plants following application of CS-based nanoparticles containing GA 3 : (1) The nanoparticles formed a coating on the seeds, which maintained the release of GA 3 for some period after the seed priming process. The coating of nanoparticles may also have assisted in maintaining seed hydration, which together with the release of GA 3 had a positive effect on the early development of the seedlings, consequently improving their viability prior to transfer to the soil; (2) The nanoparticles were taken up by the seeds and then continued to release GA 3 within the plant tissues, hence increasing the endogenous GA 3 availability more efficiently, compared to the application of GA 3 . The coating of seeds and/or their uptake of nanoparticles provide possible explanations for the positive results obtained using these nanocarrier systems containing GA 3 . However, further studies will be required in order to elucidate their mechanisms of action and the reasons for their effectiveness.

Conclusions
By using realistic conditions for seed treatment and tomato cultivation, the results indicated that the chitosan-based nanoparticle systems loaded with GA 3 plant growth regulator presented excellent potential for use in seed treatment in agriculture. The best results were achieved with the nanoALG/CS-GA 3 formulation, which not only enhanced plant development, but also increased fruit productivity. These nontoxic systems deserve further studies aimed at increasing food production in sustainable agricultural practices. Additional ways of applying the systems should be investigated, such as foliar application at different stages of plant development. This is the first work to report the use of these carrier systems for the treatment of seeds, with evaluation of their effects up until production of the final crop. The systems could be used for treating the seeds of different crop species in order to improve productivity, add value to the product, and provide greater profits for the producer. In addition, the encapsulation of other classes of plant growth regulators could also be used to enhance their effectiveness and increase crop productivity. Further studies should be performed to elucidate the ways in which the characteristics of a nanocarrier system influence the biological activities of the active agents.