Correction to: Scientific Reports https://doi.org/10.1038/s41598-019-38615-6, published online 18 February 2019
In this Article, Figure 6 is a duplication of Figure 4. The correct Figure 6 appears below as Figure 1.
(a) Cyclic voltammograms of 4-μm-thick pPy layers on surface-treated electrodes: Scan rate = 1 mV/s, electrolyte = 0.2 M HCl. (b) Charge capacity retention of the pPy layers as a function of scan rate (mV/s).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Kim, KG., Kim, S.Y. Publisher Correction: Increase in Interfacial Adhesion and Electrochemical Charge Storage Capacity of Polypyrrole on Au Electrodes Using Polyethyleneimine. Sci Rep 9, 6346 (2019). https://doi.org/10.1038/s41598-019-42219-5
Published:
DOI: https://doi.org/10.1038/s41598-019-42219-5
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
