Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

UV plasmonic properties of colloidal liquid-metal eutectic gallium-indium alloy nanoparticles


Nanoparticles made of non-noble metals such as gallium have recently attracted significant attention due to promising applications in UV plasmonics. To date, experiments have mostly focused on solid and liquid pure gallium particles immobilized on solid substrates. However, for many applications, colloidal liquid-metal nanoparticle solutions are vital. Here, we experimentally demonstrate strong UV plasmonic resonances of eutectic gallium-indium (EGaIn) liquid-metal alloy nanoparticles suspended in ethanol. We rationalise experimental results through a theoretical model based on Mie theory. Our results contribute to the understanding of UV plasmon resonances in colloidal liquid-metal EGaIn nanoparticle suspensions. They will also enable further research into emerging applications of UV plasmonics in biomedical imaging, sensing, stretchable electronics, photoacoustics, and electrochemistry.


Gold and silver have dominated plasmonics in the past decade and remain highly relevant to the field1. However, many other plasmonic materials exist, which have significant advantages in several emerging applications. Such plasmonic materials include aluminium2, copper3, platinum and palladium4, as well as ferromagnetic metals and their alloys such as cobalt, nickel, iron and Permalloy5. Aluminium for example, shows strong plasmon resonances from the visible to the ultraviolet (UV) spectral region. It is abundant in nature, used industrially on a large scale and therefore inexpensive2. Copper enables ultralow-loss plasmonic waveguides that can outperform their counterparts made of gold and is also compatible with both silicon photonics and silicon microelectronics3. Platinum and palladium are essential for plasmonic optical gas sensing6. The plasmonic properties of ferromagnetic metals can conveniently be controlled via external magnetic fields, which is the basis of the field of magneto-plasmonics5. Furthermore, this allows combining plasmonics with magnonics and spintronics7.

The interest in plasmonic metals other than gold and silver is also rooted in their ability to support plasmon resonances in the UV spectral range. Important examples are gallium8,9,10,11,12,13,14,15,16, indium9,10, tin9,10, thallium9,10, antimony14, lead10, bismuth14,17, magnesium18, and rhodium10,19,20, as well as some of their alloys21. Nanoparticles (NPs) made of these metals are promising candidates for several specific applications in biomedical imaging and sensing. For example, many biomolecules such as DNA strongly absorb light in the UV spectral range. Plasmon-enhanced UV spectroscopy may provide a means to observe dynamic biochemical processes and characterise the chemical properties of these molecules in situ. Moreover, UV-plasmonic NPs have been predicted to find applications in biomedicine as well as in label-free DNA and single molecule sensing22,23,24,25. In cardiovascular science, plasmonic NPs also play an important role in the imaging of atherosclerotic plaques and the study of their pathophysiology with light at different wavelengths including the UV spectral range26,27,28.

Among UV-plasmonic NPs known today, those made of pure gallium have attracted particular attention8,9,12,13,16,25,29. Gallium is an environmentally stable liquid metal at near room temperature and it has been a key element in both electronic and optoelectronic devices since the 1960s30. However, despite being well-understood, gallium as well as its alloys continue to be a topic of active research revealing new and unique properties of this material31,32,33,34. Unlike gold and silver, gallium has a Drude-like dielectric permittivity function extending from the UV range through the visible and, mostly in the liquid state, into the infrared spectral region13,21. Due to their high environmental stability and excellent mechanical properties gallium and its alloys are highly relevant for many emerging applications32,33,34. The liquid nature of gallium alloys also opens unique applications in reconfigurable and photoacoustic UV-plasmonics devices35.

The field of gallium-based UV plasmonics has thus far mostly focused on solid and liquid NPs fabricated on solid substrates. However, since the melting point of gallium is well below the normal human body temperature, understanding and engineering colloidal liquid gallium NPs is vital for biomedical applications22,23,24,25.

In this paper, we experimentally and theoretically investigate eutectic gallium-indium (EGaIn, 75% Ga 25% In by weight, ~15.5 °C melting point29) spherical NPs suspended in ethanol and demonstrate their strong UV plasmonic resonances. Our numerical model based on Mie theory also predicts UV plasmonic resonances and is in good qualitative agreement with experimental results. We also suggest that for some UV plasmonic applications it would be more advantageous to utilize EGaIn than pure gallium because of its superior mechanical, electrical and chemical properties as well as ease of nanofabrication. Indeed, EGaIn is more suitable for liquid-metal UV-plasmonic applications because its melting point is well below room temperature, but the transition of pure gallium into the liquid state may require additional heating under ambient conditions. The liquid-metal EGaIn NP synthesis technique employed in this work is based on ultrasonication and is therefore simple and up-scalable. Moreover, EGaIn offers a low toxicity and has negligible vapour pressure and low viscosity32,33, which makes it essential for stretchable electronic and biomedical devices34. Therefore, in combination with strong UV plasmonic properties, excellent non-optical properties of EGaIn open up opportunities to integrate UV plasmonics with electronics, photoacoustics and optomechanics34, and electrochemistry36 at the nanoscale.

Results and Discussion

EGaIn NPs were synthesized via ultrasonication. This technique is particularly advantageous for our optical analysis because it allows producing NPs with diameters of about 25 nm to 200 nm, which have theoretically been predicted to support strong localized UV-plasmon resonances10. Other fabrication techniques, such as microfluidic flow focusing37, produce much larger EGaIn particles (diameters of ~50 μm) that cannot support any localized UV plasmon mode. Bottom-up methods that are often used to produce metal NPs are difficult to employ with gallium alloys due to its large oxidation potential25.

EGaIn (200 mg) was added to absolute ethanol (10 mL) and sonicated using a probe sonicator (Qsonica, Q700) for 10 minutes at 20 W in a 20 mL vial to create EGaIn particles. Larger particles precipitated for 2 hours and the supernatant was used for further experiments. An exemplary scanning transmission electron microscopy image of the resulting particles as well as electron dispersive X-ray spectroscopy maps of the same particles are shown in the Supplementary Information Fig. S1. These images demonstrate the eutectic nature of the synthesized nanoparticles. The particles were colloidally stable for several weeks before aggregates formed, leading to precipitation. The NP suspension was diluted (1:50 in ethanol) and drop cast onto a holey carbon TEM grid for particle size analysis and diluted 10 times in ethanol for optical analysis.

Figure 1A shows a representative TEM image of the synthesized EGaIn NPs. Based on the analysis of 264 NPs, we find that the sample contains a broad distribution of NP sizes peaking at 100 nm (Fig. 1B). We find more than 20 NPs in each bin (20 nm width) in the size range from 30 nm to 170 nm. A broad NP size distribution in our sample is due to stochastic nature of the sonication process. Finally, we determine (by using both TEM and ellipsometry) that all NPs have a gallium oxide shell (h) of ~3 nm thickness38. Significantly, removing the shell would cause the NPs to coalesce and become unstable, which is highly undesirable.

Figure 1

Nanoparticle size analysis. (A) Representative transmission electron microscopy (TEM) image of EGaIn NPs on a holey carbon grid. (B) Nanoparticle size distribution based on the TEM analysis of 264 NPs. The red curve represents a Gaussian fit to the NP size distribution with a peak at ~100 nm.

We performed UV-visible absorption spectroscopy experiments of the EGaIn NPs suspended in ethanol to measure the optical absorption spectra of the NPs. The NP dispersion was placed in a UV quartz cuvette for extended UV transparency. Extinction and absorption spectra (Agilent Technologies, USA, Cary 7000) were obtained using an integrating sphere for the NP dispersion and the solvent Fig. 2A. Ethanol starts to absorb UV light below ~250 nm and strongly absorbs light below 205 nm, which is generally used as a lower cut-off wavelength for ethanol39. The ethanol contribution to the spectrum was subtracted from the NP spectra (Fig. 2B).

Figure 2

Optical spectroscopy of EGaIn NPs dispersed in ethanol. (A) Raw extinction and absorption spectra of the EGaIn NPs dispersed in ethanol, with pure ethanol absorption for reference. The solvent starts to strongly absorb below 205 nm as indicated by the vertical dashed black line. (B) Extinction, absorption and scattering spectra of the EGaIn NPs only. The ethanol background was subtracted and the scattering spectrum was obtained by subtracting the absorption from the extinction spectrum. The inset shows the scattering spectrum only for a wider spectral range.

The extinction and absorption spectra show two dominant peaks: one broad peak centered at ~275 nm and a second one at ~213 nm. Due to the close proximity of the latter peak to the cut-off wavelength of ethanol, both its absolute and relative amplitude and spectral position are potentially affected by the onset of strong ethanol absorption. By subtracting the absorption spectrum from the extinction spectrum, we find that the NPs also strongly scatter light in the region of the 213 nm peak, while the spectrum is clearly dominated by absorption above 220 nm. Another broad scattering peak is present in the visible centred at around 400 nm (see Fig. 2B, inset). This confirms that, similar to liquid pure-gallium NPs13, EGaIn NPs dispersed in ethanol also support plasmon resonances in the visible range.

We used Mie theory40,41 to explain the physical origin of the resonance peaks in Fig. 2, and calculate the light scattering and absorption properties of single EGaIn NPs in ethanol. In general, Mie theory allows for the determination of the particles’ scattering (Csca) and absorption (Cabs) cross sections, as well as their extinction (Cext = Csca + Cabs) cross sections40,41. In the following, the light absorption is analysed in terms of a particle’s absorption efficiency defined as Qabs = Cabs/G41, where G = πR2 is the geometrical cross-section of a sphere. Note that Qabs can have values greater than one, implying that the NP can absorb photons outside its geometrical cross-sectional area G40,41.

We first calculate the optical properties for single liquid gallium NPs with diameters d of 50 nm, 100 nm, 150 nm and 200 nm, all of which are present in the NP ensemble (Fig. 1). Then, we weight the resulting spectra by the proportion of NPs in the ensemble, which allows us to visually estimate the relative contribution of each spectrum (Fig. 3E). In all calculations, we take into account the experimentally measured gallium oxide shell thickness (h = 3 nm, Fig. 3A) and assume that the NPs are embedded in a constant dielectric material of refractive index nEtOH = 1.478, which is the refractive index of ethanol at 185 nm42. We also compared the result obtained with the Mie theory with that obtained with a 3D finite-difference time-domain (FDTD) method for a single NP. As shown in the Supplementary Information Fig. S2, the results obtained with both methods are in acceptable agreement, even though the FDTD method fails to reproduce some features seen in the spectrum produced by the exact Mie theory.

Figure 3

Theoretical results and comparison with experimental data. (A) Geometry of the investigated EGaIn NP with diameter d, surrounded by a gallium oxide shell of thickness h = 3 nm and refractive index nox = 2. The orientation of the E-field polarisation and the k-vector are also shown. (B) Normalized field intensity distribution I/I0 (=|E|2/|E0|2) in and around the NP upon 213 nm excitation. The distribution was also calculated for 275 nm excitation (not shown). (C) Field intensity distribution as a function of radial distance from the NP centre along the x – axis. (D) Comparison of the theoretical absorption spectrum of a 100 nm particle (red line) with the experimental absorption spectrum (blue line). The result obtained by using an effective medium model is also presented (green line). (E) Calculated absorption efficiency Qabs as a function of wavelength for 50 nm, 100 nm, 150 nm and 200 nm sized particles. Note that the spectra are weighed by the proportion of NPs in the ensemble.

It is instructive to discuss the dielectric permittivity function of EGaIn. We find that in most studies on gallium and gallium alloys the surface oxide layer is not removed before measurements of the dielectric permittivity function are conducted21. When the oxide was removed to get the ‘pure’ metal properties, it was demonstrated that gallium and EGaIn had different optical properties in the absence of the oxide, but showed very similar properties in the presence of the oxide21. This can be explained by the fact that EGaIn becomes surface-enriched with indium in the absence of the oxide21,42.

In our simulations, we therefore use the fact that in the presence of the oxide layer, the optical properties of EGaIn and pure liquid gallium are similar21,43. In the UV-visible spectral region, the dielectric permittivity function of pure liquid gallium can accurately be represented by a simple Drude-like model13,21,43. Thus, as experimental data for the dielectric permittivity of EGaIn (εEGaIn) in the UV spectral region are not available, we employ the Drude model to extrapolate experimental values of εEGaIn obtained for the visible-to-NIR (400 nm to 1000 nm) spectral region21. The refractive index of the oxide layer is nox = 213.

Figure 3B shows the normalized field intensity distribution I/I0 (=|E|2/|E0|2) at a wavelength of 213 nm, where I and I0 denote the calculated and incident field, respectively. Here, a close to 15-fold field intensity enhancement is reached at the surface of the NP, while for 275 nm excitation this enhancement is only 4-fold (Fig. 3C). The radial field intensity cross-section in Fig. 3C also shows that the field intensity is more strongly confined to the NP surface at 213 nm compared to 275 nm. From studies of conceptually similar elongated plasmonic NPs44,45, it is known that a stronger field confinement in the near-field zone of the NP leads to a lower radiative broadening of the resonance peak detected in the far-field zone. Indeed, in good agreement with our experimental observations, the theoretical resonance peak at 213 nm is significantly narrower than the peak at 275 nm (Fig. 3D). Figure 3C also reveals that the dielectric properties of the thin oxide layer result in an additional obstacle for the enhanced field to penetrate the metal surface of the NP, which is a well-known effect demonstrated in systems with a technologically important artificial thin dielectric layer46,47.

For a 100 nm particle, the experimentally observed and calculated absorption peak positions are in excellent quantitative agreement and located at 213 nm and 275 nm (Fig. 3D). The peak at 213 nm shows a narrow spectral width of 9 nm (experiment) and 11 nm (theory). The broader peak at 275 nm has a linewidth of 92 nm (experiment) and 26 nm (theory). The number and relative intensity of resonance peaks in the spectral region between 150 nm and 250 nm varies for the investigated NP sizes in the size range of 50–200 nm (Fig. 3E). While the calculated spectrum for a 50 nm particle shows only one pronounced peak below 200 nm (experimentally not accessible here), the spectrum of a 200 nm particle exhibits three far less pronounced peaks. Importantly, all particle sizes show a significant peak at 275 nm in agreement with experiments.

Finally, we employ an effective medium model to simulate the collective optical response of the ensemble of NPs. We first weight the calculated spectra of the single liquid-metal NPs by the proportion of NPs in the ensemble (Fig. 1B) and then we add them up to obtain an effective response spectrum. In the resulting curve (Fig. 3D), the peak at 275 nm corresponds to the same peak seen in both experimental and theoretical spectra of the 100 nm NP. However, the 213 nm peak appears to merge with the 195 nm higher-order mode peak originating from the spectrum of the 50 nm NP (Fig. 3E). This result is consistent with expectations from an effective medium approach where resonance peaks may become become broader due to contributions all NPs in the ensemble.

Strong absorption of light by ethanol at wavelengths below 205 nm and the peculiarities of the field intensity distribution of higher-order plasmon modes (Fig. 3C) helps to explain why the effective medium approach fails to reproduce the 213 nm peak observed in experiment. The absorption spectrum was measured by using an integrating sphere for the NP dispersion. The 195 nm peak of the 50 nm NP is a higher-order plasmon mode and therefore its contribution to the experimental spectrum was small. Indeed, a high amplitude and narrow linewidth of the 195 nm peak imply that light is tightly confined to the NP and therefore is not emitted to the far-field zone where integrating sphere measurement are performed but it is mostly absorbed by ethanol. This process is not taken into account by the effective medium approach based on theoretically calculated near-field zone optical properties of NPs. However, the prediction of this model for the 275 nm peak confirms that in the 250–350 nm spectral range the optical response of the NP ensemble is dominated by the spectrum of single 100 nm NPs that are most numerous in our samples.


We have investigated the UV plasmonic properties of eutectic gallium-indium (EGaIn) liquid-metal NPs suspended in ethanol and calculated the particles’ optical properties by using Mie theory. We experimentally demonstrate that the NPs exhibit UV plasmonic resonances. In agreement with our theoretical model for a 100 nm particle and an effective medium approach, we show that the two main resonances are located at 213 nm and 275 nm. These UV plasmonic properties of liquid-metal NPs are of significant interest due to their potential applications in biomedical imaging, sensing and medicine. The results presented in this work also further contribute to the concept of reconfigurable liquid-metal plasmonics35, where plasmon resonances of liquid-metal NPs can be tuned by deforming the shape of the NP using, for example, ultrasound. In this case, the NPs must be in solution to enable an efficient propagation of ultrasound from the source to the NPs. Importantly, although the plasmonic properties of liquid-metal NPs made of pure gallium are similar25, the lower melting point of EGaIn (~15.5 °C) compared to pure Ga (~30 °C) for example make it more suitable for applications at room temperature. Finally, an increasingly important role of liquid metal EGaIn NPs in stretchable electronic devices and mechanics34 opens up opportunities to further integrate plasmonics with electronics, optomechanics and electrochemistry36 at the nanoscale.


EGaIn nanoparticles were synthesized using sonication. Briefly, EGaIn (200 mg) was added to absolute ethanol (10 mL) and sonicated using a probe sonicator (Qsonica, Q700) for 10 minutes at 20 W in a 20 mL vial to create EGaIn particles. Larger particles were allowed to precipitate for 2 hours and the supernatant was used for experiments. Extinction and absorption spectra (Agilent Technologies, USA, Cary 7000) were obtained using an integrating sphere. A UV quartz cuvette was used for extended UV transparency.

Standard Mie theory40,41 and finite-difference time-domain (FDTD) methods48 were used to calculate the absorption spectra of EGaIn NPs. In all simulations, the standard Drude model48 was employed to fit experimental values of the dielectric permittivity of EGaIn21. See Supplementary Information for more details regarding FDTD simulations.

Data Availability

The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request.


  1. 1.

    Stockman, M. I. Nanoplasmonics: past, present, and glimpse into future. Opt. Express 19, 2321–2327 (2011).

    Article  Google Scholar 

  2. 2.

    Knight, M. W. et al. Aluminum for Plasmonics. ACS Nano 8, 834–840 (2014).

    CAS  Article  Google Scholar 

  3. 3.

    Fedyanin, D. Y., Yakubovsky, D. I., Kirtaev, R. V. & Volkov, V. S. Ultralow-Loss CMOS Copper Plasmonic Waveguides. Nano Lett. 16, 362–366 (2016).

    ADS  CAS  Article  Google Scholar 

  4. 4.

    Langhammer, C., Yuan, Z., Zoric, I. & Kasemo, B. Plasmonic Properties of Supported Pt and Pd Nanostructures. Nano Lett. 6, 833–838 (2006).

    ADS  CAS  Article  Google Scholar 

  5. 5.

    Maksymov, I. S. Reviews in Physics Magneto-plasmonic nanoantennas: Basics and applications. Rev. Phys. 1, 36–51 (2016).

    Article  Google Scholar 

  6. 6.

    Liu, N., Tang, M. L., Hentschel, M., Giessen, H. & Alivisatos, A. P. Nanoantenna-enhanced gas sensing in a single tailored nanofocus. Nat. Mater. 10, 631 (2011).

    ADS  CAS  Article  Google Scholar 

  7. 7.

    Maksymov, I. S. Magneto-Plasmonics and Resonant Interaction of Light with Dynamic Magnetisation in Metallic and All-Magneto-Dielectric Nanostructures. Nanomaterials 5, 577–613 (2015).

    CAS  Article  Google Scholar 

  8. 8.

    Wu, P. C. et al. Real-time plasmon resonance tuning of liquid Ga nanoparticles by in situ spectroscopic ellipsometry. Appl. Phys. Lett. 9, 103119 (2007).

    ADS  Article  Google Scholar 

  9. 9.

    Sanz, J. M. et al. UV Plasmonic Behavior of Various Metal Nanoparticles in the Near- and Far-Field Regimes: Geometry and Substrate Effects. J. Phys. Chem. C 117, 19606–19615 (2013).

    CAS  Article  Google Scholar 

  10. 10.

    McMahon, J. M., Schatz, G. C. & Gray, S. K. Plasmonics in the ultraviolet with the poor metals Al, Ga, In, Sn, Tl, Pb, and Bi. Phys. Chem. Chem. Phys. 15, 5415–5423 (2013).

    CAS  Article  Google Scholar 

  11. 11.

    Naik, G. V., Shalaev, V. M. & Boltasseva, A. Alternative Plasmonic Materials: Beyond Gold and Silver. Adv. Mater. 25, 3264–3294 (2013).

    CAS  Article  Google Scholar 

  12. 12.

    Yang, Y. et al. Ultraviolet–Visible Plasmonic Properties of Gallium Nanoparticles Investigated by Variable-Angle Spectroscopic and Mueller Matrix Ellipsometry. ACS Photonics 1, 582–589 (2014).

    CAS  Article  Google Scholar 

  13. 13.

    Knight, M. W. et al. Gallium Plasmonics: Deep Subwavelength Spectroscopic Imaging of Single and Interacting Gallium Nanoparticles. ACS Nano 9, 2049–2060 (2015).

    CAS  Article  Google Scholar 

  14. 14.

    Toudert, J. & Serna, R. Ultraviolet-visible interband plasmonics with p-block elements. Opt. Mater. Express 6, 2434–2447 (2016).

    ADS  CAS  Article  Google Scholar 

  15. 15.

    Zhang, T. et al. Gallium platinum alloys - a new material system for UV plasmonics. Opt. Mater. Express 7, 2880–2887 (2017).

    ADS  CAS  Article  Google Scholar 

  16. 16.

    Palomares, F. J., Nucciarelli, F. & Pau, J. L. Tunable plasmonic resonance of gallium nanoparticles by thermal oxidation at low temperatures. Nanotechnology 28, 405705 (2017).

    Article  Google Scholar 

  17. 17.

    Cuadrado, A., Toudert, J. & Serna, R. Polaritonic-to-Plasmonic Transition in Optically Resonant Bismuth Nanospheres for High-Contrast Switchable Ultraviolet Meta-Filters. IEEE Photonics J. 8, 1–11 (2016).

    Article  Google Scholar 

  18. 18.

    Appusamy, K., Blair, S., Nahata, A. & Guruswamy, S. Low-loss magnesium films for plasmonics. Mater. Sci. Eng. B 181, 77–85 (2014).

    CAS  Article  Google Scholar 

  19. 19.

    Alcaraz de la Osa, R. et al. Rhodium Tripod Stars for UV Plasmonics. J. Phys. Chem. C 119, 12572–12580 (2015).

    CAS  Article  Google Scholar 

  20. 20.

    Watson, A. M. et al. Rhodium Nanoparticles for Ultraviolet Plasmonics. Nano Lett. 15, 1095–1100 (2015).

    ADS  CAS  Article  Google Scholar 

  21. 21.

    Morales, D., Stoute, N. A., Yu, Z., Aspnes, D. E. & Dickey, M. D. Liquid gallium and the eutectic gallium indium (EGaIn) alloy: Dielectric functions from 1.24 to 3.1 eV by electrochemical reduction of surface oxides. Appl. Phys. Lett. 109, 091905 (2016).

    ADS  Article  Google Scholar 

  22. 22.

    Lu, Y. et al. Transformable liquid-metal nanomedicine. Nat. Commun. 6, 1–10 (2015).

    ADS  CAS  Google Scholar 

  23. 23.

    Marín, A. G. et al. Gallium plasmonic nanoparticles for label-free DNA and single nucleotide polymorphism sensing. Nanoscale 8, 9842–9851 (2016).

    ADS  Article  Google Scholar 

  24. 24.

    Strobbia, P. & Cullum, B. M. Recent advances in plasmonic nanostructures for sensing: a review. SPIE Opt. Eng. 54, 100902 (2015).

    ADS  Article  Google Scholar 

  25. 25.

    Nucciarelli, F. et al. High Ultraviolet Absorption in Colloidal Gallium Nanoparticles Prepared from Thermal Evaporation. Nanomaterials 7, 172 (2017).

    Article  Google Scholar 

  26. 26.

    Wang, B. et al. Intravascular Photoacoustic Imaging. IEEE J. Quantum Electron. 16, 588–599 (2010).

    CAS  Article  Google Scholar 

  27. 27.

    Fatakdawala, H. et al. Fluorescence Lifetime Imaging Combined with Conventional Intravascular Ultrasound for Enhanced Assessment of Atherosclerotic Plaques: an Ex Vivo Study in Human Coronary Arteries. J. Cardiovasc. Trans. Res 8, 253–263 (2015).

    Article  Google Scholar 

  28. 28.

    Bourantas, C. V. et al. Hybrid intravascular imaging: recent advances, technical considerations, and current applications in the study of plaque pathophysiology. Eur. Heart J. 38, 400–412 (2017).

    Article  Google Scholar 

  29. 29.

    Lin, Y., Liu, Y., Genzer, J. & Dickey, M. D. Shape-transformable liquid metal nanoparticles in aqueous solution. Chem. Sci. 8, 3832–3837 (2017).

    CAS  Article  Google Scholar 

  30. 30.

    Moskalyk, R. R. Gallium: the backbone of the electronics industry. Miner. Engineeing 16, 921–929 (2003).

    CAS  Article  Google Scholar 

  31. 31.

    Losurdo, M., Suvorova, A., Rubanov, S., Hingerl, K. & Brown, A. S. Thermally stable coexistence of liquid and solid phases in gallium nanoparticles. Nat. Mater. 15, 995 (2016).

    ADS  CAS  Article  Google Scholar 

  32. 32.

    Morley, N. B., Burris, J., Cadwallader, L. C. & Nornberg, M. D. GaInSn usage in the research laboratory. Rev. Sci. Instrum. 79, 056107 (2008).

    ADS  CAS  Article  Google Scholar 

  33. 33.

    Dickey, B. M. D. et al. Eutectic Gallium-Indium (EGaIn): A Liquid Metal Alloy for the Formation of Stable Structures in Microchannels at Room Temperature. Adv. Funct. Mater. 18, 1097–1104 (2008).

    CAS  Article  Google Scholar 

  34. 34.

    Lear, T. R. et al. Liquid metal particle popping: Macroscale to nanoscale. Extrem. Mech. Lett. 13, 126–134 (2017).

    Article  Google Scholar 

  35. 35.

    Maksymov, I. S. & Greentree, A. D. Dynamically reconfigurable plasmon resonances enabled by capillary oscillations of liquid-metal nanodroplets. Phys. Rev. A 96, 43829 (2017).

    ADS  Article  Google Scholar 

  36. 36.

    Yu, Z. et al. Discovery of a Voltage-Stimulated Heartbeat Effect in Droplets of Liquid Gallium. Phys. Rev. Lett. 121, 24302 (2018).

    ADS  Article  Google Scholar 

  37. 37.

    Thelen, J., Dickey, M. D. & Ward, T. A study of the production and reversible stability of EGaIn liquid metal microspheres using flow focusing. Lab Chip 12, 3961 (2012).

    CAS  Article  Google Scholar 

  38. 38.

    Lin, Y. et al. Handwritten, Soft Circuit Boards and Antennas Using Liquid Metal Nanoparticles. Small 11, 6397–6403 (2015).

    CAS  Article  Google Scholar 

  39. 39.

    Friedel, R. A. & Orchin, M. Ultraviolet spectra of aromatic compounds. (Wiley, 1951).

  40. 40.

    Yguerabide, J. & Yguerabide, E. E. Light-Scattering Submicroscopic Particles as Highly Fluorescent Analogs and Their Use as Tracer Labels in Clinical and Biological Applications. Anal. Biochem. 262, 137–156 (1998).

    CAS  Article  Google Scholar 

  41. 41.

    Bohren, C. F. & Huffman, D. R. Absorption and Scattering of Light by Small Particles. (WILEY-VCH Verlag, 1983).

  42. 42.

    Sani, E. & Dell’Oro, A. Spectral optical constants of ethanol and isopropanol from ultraviolet to far infrared. Opt. Mater. 60, 137–141 (2016).

    ADS  CAS  Article  Google Scholar 

  43. 43.

    Akashev, La & Kononenko, V. I. Optical properties of liquid gallium-indium alloy. Tech. Phys. 43, 853–854 (1998).

    Article  Google Scholar 

  44. 44.

    Wei, H., Reyes-Coronado, A., Nordlander, P., Aizpurua, J. & Xu, H. Multipolar Plasmon Resonances in Individual Ag Nanorice. ACS Nano 4, 2649–2654 (2010).

    CAS  Article  Google Scholar 

  45. 45.

    Maksymov, I. S. & Greentree, A. D. Synthesis of discrete phase-coherent optical spectra from nonlinear ultrasound. Opt. Express 25, 7496–7506 (2017).

    ADS  Article  Google Scholar 

  46. 46.

    Aouani, H. et al. Crucial Role of the Adhesion Layer on the Plasmonic Fluorescence Enhancement. ACS Nano 3, 2043–2048 (2009).

    CAS  Article  Google Scholar 

  47. 47.

    Maksymov, I. S. et al. Metal-Coated Nanocylinder Cavity for Broadband Nonclassical Light Emission. Phys. Rev. Lett. 105, 180502 (2010).

    ADS  CAS  Article  Google Scholar 

  48. 48.

    Taflove, A. & Hagness, S. C. Computational Electrodynamics: The Finite-Difference Time-Domain Method, 3rd ed. (Artech House, 2005).

Download references


This work was supported by Australian Research Council (ARC) through its Centre of Excellence for Nanoscale BioPhotonics (CE140100003), LIEF program (LE160100051) and Future Fellowship (FT160100357, FT180100343). This research was undertaken on the NCI National Facility in Canberra, Australia, which is supported by the Australian Commonwealth Government. P.R. acknowledges funding through the RMIT Vice Chancellor’s Research Fellowship. The authors acknowledge the support of the Ian Potter Foundation in establishing the Ian Potter NanoBioSensing Facility at RMIT University, where the UV-Vis absorption spectroscopy was carried out. Y.L. and M.D.D. acknowledge funding from the National Science Foundation through the Research Triangle MRSEC (DMR-1121107). The authors acknowledge use of the Analytical Instrumentation Facility (AIF) at North Carolina State University, which is supported by the State of North Carolina and the National Science Foundation (award number ECCS-1542015).

Author information




I.S.M. performed all calculations and simulations. P.R. performed all optical experiments and prepared all graphs. Y.L. synthesized the investigated particles and performed electron microscopy analysis. P.R. and I.S.M. designed experiments and drafted the manuscript. All authors contributed to writing and revising the manuscript and contributed to analysing and interpreting the experimental results.

Corresponding authors

Correspondence to Philipp Reineck or Ivan S. Maksymov.

Ethics declarations

Competing Interests

The authors declare no competing interests.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary file

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Reineck, P., Lin, Y., Gibson, B.C. et al. UV plasmonic properties of colloidal liquid-metal eutectic gallium-indium alloy nanoparticles. Sci Rep 9, 5345 (2019).

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI:

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing