Functional identification of alginate lyase from the brown alga Saccharina japonica

Despite the progress in massive gene analysis of brown algal species, no alginate-degrading enzyme from brown alga has been identified, impeding the understanding of alginate metabolism in brown alga. In the current study, we identified and characterized alginate lyase from Saccharina japonica using a protein-based approach. First, cDNA library was prepared from the S. japonica sporophyte. Expression screening was then performed; the encoding gene was identified and cloned; and the recombinant enzyme was purified and characterized. Alginate lyase production in algal tissues was evaluated by western blotting. The identified alginate lyase, SjAly (359 amino acids, with a predicted N-terminal secretion signal of 27 residues), is encoded by an open reading frame comprising seven exons. Recombinant SjAly exhibited endolytic alginate lyase activity, specifically toward stretches of consecutive β-d-mannuronic acid units. The optimum temperature, pH, and NaCl concentration were 30 °C, pH 8.0, and 100 mM, respectively. SjAly exhibited pronounced activity below 20 °C, the S. japonica growth temperature. SjAly was highly expressed in the blade but not the stipe and rhizoid. The data indicate that S. japonica possesses at least one active alginate lyase. This is the first report of a functional alginate lyase from brown alga, the major natural alginate producer.


Results and Discussion
Identification of an S. japonica protein with alginate-degrading activity. Since no nucleotide or amino acid sequence information for any candidate alginate-degrading enzyme from brown alga was available before the current study, S. japonica cDNA library was constructed and expression screening performed. Out of 3280 colonies screened, one colony extract exhibited alginate degradation activity, with oligoalginate reaction products detected by thin-layer chromatography (TLC) (Supplementary Fig. S1). This suggested the presence of an alginate-degrading enzyme in brown alga. Although the sequenced cDNA clone harbored 1057 bp encoding 340 amino acids, including the termination codon, the N-terminal sequence appeared to be missing ( Supplementary Fig. S2). Hence, S. japonica transcriptome database was generated and the clone sequence was used to search the database using tblastn search. One candidate sequence with a full open reading frame was identified. The candidate DNA sequence was amplified using a specific set of primers complementary to the 5′-and 3′-untranslated regions; it encoded a 359-amino acid protein, which was named SjAly (Supplementary Fig. S2). Since the N-terminal 27 residues were predicted by the SignalP 4.1 server to constitute a secretion signal peptide, we concluded that the mature SjAly consisted of 332 residues, with a molecular weight of 35,837. According to the database search, SjAly shared the highest identity (48%) with a protein annotated as E. siliculosus FirrV-1-B30 precursor (nosD copper-binding protein of Feldmannia irregularis virus a; GenBank accession number CBN79456) whose function is unclear (Fig. 1a). Residues 1-13 of the counterpart were predicted to constitute a signal peptide for secretion. Further, SjAly shared 38-47% identity with five other proteins annotated as FirrV-1-B30 in E. siliculosus. No secretion signal peptide was predicted for three of the proteins (CBJ32749, CBN76926, and CBN76927), while four proteins (CBJ32331, CBJ32749, CBN76926, and CBN76927) harbor a C-terminal extension sequence of 171-281 residues that SjAly lacks.
To characterize the gene structure of SjAly, genomic PCR was conducted using a primer set complementary to the 5′-and 3′-untranslated regions of the SjAly gene. Unfortunately, the attempt was unsuccessful, probably because of the length of the target region or the presence of sequence(s) that are challenging to amplify (e.g., GC-rich regions). Consequently, the nucleotide sequence of SjAly gene was aligned with the genomic sequence of S. japonica 35 available from the CoGe database (genomevolution.org/coge) 41 . A sequence identical to SjAly cDNA was identified in contig_JXRI01000040. The analysis revealed that SjAly gene consists of seven exons (Fig. 1b). All overlapping nucleotides of SjAly gene and exons were matched except that T at position 1345 of SjAly gene was replaced with C in the genome sequence, without altering the amino acid sequence. The first two and the last two nucleotides of each intron were GT and AG, respectively. This supported the notion that SjAly is an original gene product of S. japonica.
A homology model of SjAly was constructed using Bacteroides thetaiotaomicron rhamnogalacturonan lyase (PDB ID: 5OLQ) belonging to the polysaccharide lyase family (PL) 9 as a template, with 100% confidence (Supplementary Fig. S3). The analysis suggested that the protein contains a parallel β-helix fold. Among alginate lyases, a similar fold has been reported for Paraglaciecola chathamensis AlyGC from the PL-6 family 42 . Hence, amino acid sequence of SjAly was compared with those of PL-6 and PL-9 enzymes (Supplementary Figs S4 and S5). SjAly shared low identity with these enzymes: 12% with P. chathamensis AlyGC (PL-6); 13% with Pedobacter heparinus chondroitinase B (PL-6); 18% with Dickeya dadantii pectate lyase PelL (PL-9); and 13% with B. thetaiotaomicron rhamnogalacturonan lyase (PL-9). Two catalytic residues, corresponding to Lys247 and Arg268 of AlyGC 42 , are conserved in the PL-6 enzymes; the corresponding residues in SjAly are Arg221 and Val242. Of these, Arg221 is not conserved in E. siliculosus homologs, being replaced by Thr, Val, Glu, or Gly (Fig. 1a). In the PL-9 family, Asn268 and Lys273 of PelL are highly conserved among pectate lyases 43 and are predicted to be catalytic residues; they correspond to Thr264 and Val269 of SjAly, respectively. Both residues are substituted by Ser in all E. siliculosus homologs (Fig. 1a). Considering the low conservation of SjAly residues in the vicinity of these www.nature.com/scientificreports www.nature.com/scientificreports/ known catalytic residues, amino acids responsible for the catalytic mechanism of SjAly may be different from those of the PL-6 and PL-9 family enzymes. Functional analysis of SjAly. Recombinant enzyme (rSjAly, residues 28-332) was first expressed as a His-tagged protein in E. coli. The purified protein yield was below 100 μg from a 1-L culture, which was  www.nature.com/scientificreports www.nature.com/scientificreports/ insufficient for biochemical characterization (data not shown). Further, as estimated by SDS-PAGE, the purity of the preparation was below 40% because of contaminating co-purified proteins. On the other hand, when rSjAly was expressed with an N-terminal HMSS-tag and C-terminal His-tag (Fig. 2a) using the baculovirus secretion expression system, at 17 °C for five days, 1.9 mg of highly pure rSjAly was successfully obtained from a 1-l culture. Molecular mass of the purified rSjAly was determined by SDS-PAGE to be approximately 35 kDa (Fig. 2b). Since the calculated mass of rSjAly without the signal peptide HMSS was 38,791 Da, the N-terminus of the protein was sequenced. The five N-terminal residues were determined to be Ala-Thr-Thr-Tyr-Lys, which was consistent with residues 28-32 of SjAly. Considering that rSjAly was purified by Ni-affinity chromatography, the protein migrated at a slightly lower position than expected on an SDS-PAGE gel. Hence, we successfully obtained rSjAly for biochemical characterization.
To investigate rSjAly substrates, the protein was incubated with several polysaccharides that are known substrates of various polysaccharide lyases (Fig. 2c). Of these, alginate was the only polysaccharide degraded by rSjAly (Fig. 2c), and TLC spots corresponding to unsaturated tri-and tetramannuronic acids were the major products. Smaller-sized decomposition products, most likely di-and monosaccharides, were also detected. Hence, alginate was the sole degradable substrate of SjAly from among the tested polysaccharides.
As shown in Fig. 2d, the relative viscosity of alginate solution was rapidly reduced by rSjAly at the early stage of the reaction, suggesting that SjAly degraded alginate in an endolytic manner. Absorbance at 548 nm of the reaction mixture after 2-thiobarbituric acid (TBA) reaction almost linearly increased in a time-dependent manner. Therefore, SjAly cleaved the glycosidic bond in alginate by a lyase mechanism.
Testing of polyM, polyG, or polyMG as substrates revealed that SjAly preferentially used polyM ( Fig. 2e). At 20 °C, the specific activities with polyG (0.25 ± 0.04 U/mg) and polyMG (0.60 ± 0.11 U/mg) were lower than that with polyM (9.1 ± 0.4 U/mg). The polyM degradation products were mainly DEH, and unsaturated di-, tri-, and tetrasaccharides (Fig. 2f). Therefore, the smallest product of rSjAly-catalyzed reaction was DEH, and it was spontaneously converted from an unsaturated monosaccharide derived from alginate. On the other hand, no degradation product was detected in the polyG reaction mixture and a weak oligosaccharide signal was detected in the polyMG reaction mixture (Fig. 2e, inset). These observations indicated that SjAly specifically attacks M-block in an alginate molecule, producing DEH and oligosaccharides.
Next, the effect of temperature, pH, NaCl, and various chemicals on SjAly activity was evaluated, with polyM as a substrate. The optimum temperature was determined to be 30 °C (with a specific activity of 13.8 ± 0.7 U/mg); no degradation activity was detected at 50 °C (Fig. 3a). Notably, appreciable activities were observed at 4-20 °C, a range comparable to the temperature tolerated by S. japonica. As shown in Fig. 3b, SjAly was stable after incubation at 4-20 °C for 30 min. A 50% loss of activity was observed at 28 °C after 30-min incubation, and the activity was completely abolished at 40 °C or above.
Further, rSjAly was more active under alkaline conditions than under acidic conditions (Fig. 3c). The optimum pH was close to 8, with over 80% of the maximum activity observed between pH 7.2 and 9.0. On the other hand, the lyase activity was not apparent below pH 5.6.
NaCl activated SjAly, with an optimum NaCl concentration of 100 mM (Fig. 3d). Although higher concentration of NaCl inhibited the enzyme activity, 19.1% relative activity was retained even in the presence of 1 M NaCl.
The effect of various compounds on rSjAly was also investigated (Fig. 3e). None of the tested compounds significantly activated rSjAly. Among them, Pb 2+ , Cd 2+ , Ni 2+ , Cu 2+ , Fe 2+ , Zn 2+ , Hg 2+ , and Fe 3+ strongly inhibited the enzyme; while Mn 2+ , Mg 2+ , Al 3+ , and DTT exerted a moderate inhibitory effect. Interestingly, Ca 2+ , and the chelating reagents EDTA and EGTA did not visibly affect rSjAly activity. It has been reported that the PL-6 and PL-9 family enzymes require Ca 2+ for activity 42,[44][45][46] . In terms of alginate lyases, AlyGC (PL-6) requires Ca 2+ for activity, with 0.2 mM EDTA almost completely inhibiting the enzyme and 0.2 mM Ca 2+ fully activating the enzyme 42 . By contrast, SjAly appeared to be an alginate lyase that does not require Ca 2+ and is not affected by divalent metal ion chelators.
The determined properties of SjAly may provide some clues for the understanding of its physiological role in S. japonica. The activity of SjAly is affected by high concentration of NaCl, suggesting that it may be active intracellularly rather than in seawater. Although brown algal alginate is thought to be biosynthesized in the Golgi apparatus [47][48][49][50] , SjAly would exhibit poor activity in such acidic organelle. Since the SjAly gene encodes a predicted signal sequence for secretion (Fig. 1a), the protein may be localized in vivo in the plasma membrane or at sites where alginate is secreted. Since SjAly specifically degrades consecutive M-stretches in alginate, two possible roles of the enzyme may be considered, before and/or after epimerization by MC5Es. In the former case, the protein may be responsible for degrading the nascent synthesized polymannuronan, similarly to the degradation of unexported alginate by the alginate lyase AlgL located in the periplasmic space in Pseudomonas fluorescens 22 . In the latter case, SjAly may contribute to the decomposition of the cell wall matrix by degrading alginate in response to such biological requirements as growth, differentiation, and changes in the environment. conducted in a mixture containing 10 mM sodium phosphate (pH 8.0), 0.1 M NaCl, 0.02 mg/mL rSjAly, and 0.2% (w/v) each substrate, at 20 °C for 10 min. The relative activity of 100% was equivalent to 9.1 U/mg. An inset shows TLC analysis of rSjAly degradation products. Enzyme reaction was conducted in a mixture containing 10 mM sodium phosphate (pH 8.0), 0.1 M NaCl, 0.02 mg/mL rSjAly, and 0.2% (w/v) each substrate, at 20 °C for 24 h. (f) TLC analysis of fractionated polyM products of degradation by rSjAly. Before, the sample before column chromatography. A, B, C, and D, degradation products eluted at 50 mM, 250 mM, 350 mM, and 450 mM NH 4 Cl ( Supplementary Fig. S6), respectively. Each determined mass by ESI-MS (Supplementary Fig. S7) and predicted possible structure are shown below the lane of each sample. ΔM, ΔMM, and ΔMMM are mean unsaturated di-, tri-, and tetramannuronic acids, respectively. (2019) 9:4937 | https://doi.org/10.1038/s41598-019-41351-6 www.nature.com/scientificreports www.nature.com/scientificreports/

Expression of SjAly in vivo.
Next, expression of SjAly in vivo was investigated using a specific antibody raised against a peptide corresponding to the residues 203-222 of SjAly, in the blade, stipe, and rhizoid of S. japonica sporophyte. As shown in Fig. 4, although no signal was detected in the rhizoid extract, a protein band of approximately 33 kDa and migrating slightly quicker than rSjAly was detected in the blade and stipe extracts. The signal in the blade sample was stronger than that in the stipe sample. This suggested that the expression of SjAly was higher in the blade than in the other algal tissues. The M:G ratio in the blade is lower than that in other portions of brown alga 5,51-53 . Therefore, an M-specific alginate lyase, such as SjAly, could be involved in alginate degradation in the blade. SjAly alone does not completely decompose alginate to DEH (Fig. 2c,e). This may indicate that other alginate lyases, with properties different from those of SjAly (such as G-or MG-lyases, and an exolytic lyase) may work together if complete degradation of alginate is required. Further, the expression of G-and/or MG-lyases may be higher than that of SjAly in the stipe and rhizoid.

Conclusions
In summary, we presented evidence that brown alga S. japonica produces at least one functional alginate lyase. This is the first report on an alginate lyase from an alginate-producing eukaryotic organism. DEH was the smallest product of alginate degradation by SjAly (Fig. 2f), which raises an interesting question about alginate metabolism in brown alga. DEH is a well-known intermediate of alginate metabolism in alginate-assimilating organisms. DEH-specific reductases, which reduce DEH to KDG using coenzyme NAD(P)H, have been characterized in Sphingomonas sp. strain A1 54,55 , Z. galactanivorans 24 , Flavobacterium sp. UMI-01 56 , Vibrio splendidus 57 , and abalone 58 . In alginate-assimilating bacteria, KDG is phosphorylated to KDPG by a kinase, and KDPG aldolase cleaves KDPG to pyruvate and glyceraldehyde 3-phosphate in the Entner-Doudoroff pathway 29,59,60 . If brown alga possesses a similar pathway, the enzymes involved should be investigated. The bacterial DEH-specific reductases identified to date belong to the short-chain dehydrogenase/reductase superfamily and the β-hydroxyacid dehydrogenase family, and the eukaryotic ones belongs to aldo-keto reductase superfamily. A number of candidate genes for proteins classified in these families have been identified in the sequence database of brown algae, such as E. siliculosus and S. japonica. Enzymes belonging to these families participate in the conversions of various compounds [61][62][63][64] . Although it is difficult to predict the specific substrate of each protein based on the protein primary structure, it might be possible to identify brown algal DEH-specific reductase by using the approach presented in the current study.
In the future, functional analysis and investigation of the cellular localization of alginate lyases and enzymes involved in the alginate metabolism in brown alga will allow elucidation of the biosynthesis and degradation of alginate in brown algae.

Methods
Materials. S. japonica sporophyte (54-cm-long) was harvested on the shore of Hakodate (Hokkaido, Japan) in June 2015. Sodium alginate (300 cps) and polygalacturonic acid were purchased from Nacalai Tesque (Kyoto, Japan). PolyM, polyG, and polyMG were prepared from alginate following the method of Gacesa and Wusteman 65 . Pectin, xanthan gum, heparin, hyaluronic acid, chondroitin sulfate B, and chondroitin sulfate C were purchased from Wako Pure Chemicals Industries (Osaka, Japan). Chondroitin sulfate A was purchased from ChromaDex (Irvine, CA). Other chemicals were purchased from Wako Pure Chemicals Industries, unless otherwise stated.

Screening of an S. japonica cDNA expression library for alginate-degradation enzymes. Total
RNA was extracted from a sporophytic thallus (0.2 g) of S. japonica using GM quicker 2 (Nippon Gene, Tokyo, Japan) and HULK alginate lyase (Nippon Gene), as described previously 66 except that DNase I (Nippon Gene) was used instead of an attached RNase A. Then, mRNA was purified using Oligotex-dT30 Super mRNA purification kit (Takara Bio, Shiga, Japan). The cDNA was synthesized and subcloned into pAP-3neo plasmid (Takara Bio) using cDNA library construction kit (Takara Bio). Recombinant pAP3neo plasmids were used as templates in PCR using PrimeStar MAX DNA polymerase (Takara Bio) and a specific primer set [primers pAP3-F, 5′-AGGTAATACACCATGATAGGTAGGGAATTCCCGGG-3′; and pAP3-R, 5′-GCGGCCGCCCTTTAGTGAGGGGATCCGGTGGAGGTG-3′ (the underlined sequences represent additional nucleotides for in-fusion cloning)] to construct the cDNA expression library. The PCR conditions were as follows: 12 cycles of 98 °C for 10 s, 55 °C for 15 s, and 72 °C for 3 min. After the removal of primers and small DNA molecules by gel filtration using a CHROMA SPIN-200 column (Takara Bio), the amplified DNA was ligated with a modified pCold vector (Takara Bio) 26 that had been predigested with NcoI and BamHI, using an In-Fusion HD cloning kit (Takara Bio). Escherichia coli BL21(DE3) (Nippon Gene) was used as the expression host; the transformants were cultured on LB agar supplemented with 50 μg/mL ampicillin at 37 °C. Each colony was cultured in 10 mL of 2×YT medium containing 50 μg/mL ampicillin at 37 °C for 12 h. Protein production was induced by incubating at 15 °C for 18 h in the presence of 0.1 mM IPTG. The cells were harvested by centrifugation at 5000 × g for 10 min, and then disrupted in 300 μL of BugBuster master mix (Merck, Darmstadt, Germany), according to the manufacturer's protocol. After centrifugation at 10 000 × g for 10 min, 10 μL of the supernatant was mixed imidazole-HCl (pH 8.0), 0.1 mg/mL rSjAly, and 100 mM each monovalent cation was incubated on ice for 1 h. The enzyme reaction was then assayed in a mixture containing 10 mM imidazole-HCl (pH 8.0), 0.02 mg/mL rSjAly, 0.2% (w/v) polyM, and 100 mM each monovalent cation, at 20 °C for 10 min. For other compounds, the incubation and assay conditions were the same except that 100 mM NaCl and the indicated concentration of each compound were used. The relative activity of 100% was equivalent to 9.5 U/mg. www.nature.com/scientificreports www.nature.com/scientificreports/ with 90 μL of 0.25% (w/v) sodium alginate solution containing 20 mM NaPi (pH 7.5) and 0.15 M NaCl, and the mixture was incubated at 17 °C for 24 h. The clones were screened on the basis of alginate degradation activity. Plasmid DNA extracted from the positive clone was sequenced using the BigDye Terminator v3.1 cycle sequencing kit and Applied Biosystems 3130xl Genetic Analyzer (both from Applied Biosystems, Foster City, CA).
RNA sequencing of S. japonica. Total RNA from S. japonica blade was prepared as described in the preceding subsection. Transcriptome analysis was performed using the HiSeq. 3000 system (Illumina, San Diego, CA) at Hokkaido System Science (Hokkaido, Japan). Trimmed sequence reads were de novo assembled using the Trinity software 67,68 . cDNA cloning and heterologous expression. DNA encoding the full open reading frame of alginate lyase was amplified using a specific primer set (primers SjA-F1, 5′-GTGACCACCCCAACCGAAACTTTGC-3′; and SjA-R1, 5′-CCGCGGGTGACCATCAATATGCGAC-3′), and PrimeStar Max DNA polymerase, with S. japonica cDNA as a template. The PCR conditions were as follows: 2 min at 98 °C; followed by 30 cycles of 10 s denaturation at 98 °C, annealing for 15 s, and extension for 30 s. The PCR reaction products were resolved on an agarose gel, purified using an ISOSPIN agarose gel kit (Nippon Gene), treated with an A-attachment mix (Toyobo, Osaka, Japan), and subcloned into pTac-1 vector (BioDynamics, Tokyo, Japan). The analyzed nucleotide sequence is available from the DDBJ/EMBL/GenBank under the accession number LC432510.
The recombinant plasmid was used as a template in PCR [with primers SjA-F2, 5′-TCTTACATCTATGCC GCCACGACGTACAAGGTTAC-3′; and SjA-R2, 5′-AAGCTTTTGCTCGAGGCAGTCTTCATCCCACGTCT-3′ (the underlined sequences represent additional nucleotides for in-fusion cloning)], using the same reaction conditions as those described in the preceding paragraph. Amplified DNA was purified and ligated with a modified pFastBac1 vector (Thermo Fisher Scientific, Waltham, MA), in which sequences for the honeybee melittin signal peptide (HMSS; MKFLVNVALVFMVVYISYIYA, N-terminal) 69,70 and 8×His-tag following a c-Myc-tag (EQKLISEEDL, C-terminal) were introduced 71 . Recombinant baculovirus particles were prepared according to the manufacturer's protocol and used to infect Sf9 insect cells (Thermo Fisher Scientific; the multiplicity of infection was approximately 10). The culture was maintained in an EX-CELL 420 medium (Sigma-Aldrich, St. Louis, MO) supplemented with 5% fetal bovine serum (Thermo Fisher Scientific) in a spinner flask at 17 °C for 7 d, and then centrifuged at 3000 × g for 15 min. The supernatant was dialyzed against 10 mM imidazole-HCl (pH 7.4) Figure 4. Western blot analysis of SjAly from Saccharina japonica. Each sample was applied to one gel in order of symmetry. After electrophoresis, the gel was cut in the middle, one stained with Coomassie Brilliant Blue and the other transferred to a nitrocellulose filter for western blotting. The primary antibody was diluted 1,000 times with 1 × TBS (20 mM Tris-HCl (pH 7.5) and 150 mM NaCl) and used, and the secondary antibody was similarly diluted 10,000 times and used. Protein bands were visualized using an ECL prime western blotting detection reagent (GE Healthcare Life Sciences, Pittsburgh, PA) and chemi-luminescence imager (EZ-capture MG, ATTO, Tokyo, Japan) in an auto exposure mode. An overexposed image is represented in Supplementary  Fig. S8. (a) SDS-polyacrylamide gel stained using Coomassie Brilliant Blue. (b) Western blot analysis using anti-SjAly antibodies. rSjAly, purified recombinant SjAly; Marker, protein ladder; Blade, protein extract from the blade; Stipe, protein extract from the stipe; Rhizoid, protein extract from the rhizoid. Full-length gel and blot are presented here.
www.nature.com/scientificreports www.nature.com/scientificreports/ with 0.5 M NaCl at 4 °C for 8 h. After centrifugation at 10 000 × g for 15 min, proteins in the supernatant were precipitated by ammonium sulfate fractionation (20-80%). The precipitates were suspended in a buffer of 10 mM imidazole-HCl (pH 7.4), 0.5 M NaCl, and 1% Triton X-100. Recombinant S. japonica alginate lyase (rSjAly) was purified using a column (1 × 3 cm) packed with His-select nickel-affinity gel (Sigma-Aldrich). The resin was washed with 20 volumes of 30 mM imidazole-HCl (pH 7.4) with 0.5 M NaCl. The protein was eluted using 250 mM imidazole-HCl (pH 7.4) with 0.5 M NaCl. After SDS-polyacrylamide gel electrophoresis (SDS-PAGE; see below), fractions containing rSjAly were collected and dialyzed against 10 mM NaPi (pH 8.0) with 0.1 M NaCl for 12 h at 4 °C. After centrifugation at 10 000 × g for 15 min, the samples were placed on ice and assayed within 2 d. Protein concentration was determined using Takara BCA protein assay kit (Takara Bio) and bovine serum albumin fraction V as a standard. The N-terminal amino-acid sequence was obtained using the ABI Procise 492 protein sequencer (Applied Biosystems), as per manufacturer's guidelines.
Alginate lyase activity assay. The reaction mixture contained 10 mM sodium phosphate (pH 8.0), 0.1 M NaCl, 0.02 mg/mL rSjAly, and 1% (w/v) sodium alginate. The decrease in viscosity of alginate solution indicative of enzyme activity was measured at 20 °C using an Ostwald-type viscometer.
Alginate lyase activity of rSjAly was determined using the TBA method, as described previously 66 . One unit of activity was defined as the amount of enzyme required to liberate 1 μmol of β-formyl-pyruvic acid per min. The assay was performed three times and the data are presented as the mean ± SD.

Fractionation of products of degradation by rSjAly and their mass spectrometry analysis.
Enzyme reaction was conducted in a mixture containing 10 mM sodium phosphate (pH 8.0), 0.1 M NaCl, 0.05 mg/ mL rSjAly, and 0.2% (w/v) polyM at 20 °C for 24 h. Reaction mixture (10 mL) was mixed with the same volume of chloroform and subjected to vortex mixing. The upper layer after centrifugation at 10 000 × g for 10 min was collected. Next, it was diluted 10-fold with distilled water and applied onto a TOYOPEARL SuperQ-650 column (1.0 × 5.0 cm) (Tosoh, Tokyo, Japan) pre-equilibrated in 10 mM NH 4 Cl. The column was washed with 100 mL of the same solution and then eluted with a step-wise gradient of 20, 50, 150, 250, 350, 450, 550, and 750 mM NH 4 Cl at a flow rate of 2.0 mL/min. Each fraction (10.0 mL) was monitored by the TBA method and peak fractions were analyzed by TLC. Samples for mass spectrometry analysis were pooled and concentrated by lyophilization as needed. Each sample was measured with an Exactive Mass Spectrometer (Thermo Fisher Scientific) with the ionization methods of electrospray ionization (ESI) at the Instrumental Analysis Division, Global Facility Center, Creative Research Institution, Hokkaido University. SDS-polyacrylamide gel electrophoresis. SDS-PAGE was conducted on a 10% (v/v) polyacrylamide gel.
After electrophoresis, the gel was stained with 0.1% (w/v) Coomassie Brilliant Blue R-250 in 50% (v/v) methanol and 10% (v/v) acetic acid, and then destained with 5% (v/v) methanol and 7% (v/v) acetic acid. Protein molecular weight marker (broad; Takara Bio) was used as the molecular standard. Western blotting. Peptide N-GEGIYIGTSSTQWKNGEDRC-C was synthesized and conjugated to keyhole limpet hemocyanin by Sigma-Aldrich. Antibodies were prepared by injecting rabbits with the conjugated peptide (Sigma-Aldrich). The anti-SjAly antibody was purified by affinity chromatography using an immobilized antigen formyl-cellulofine column (Seikagaku Kogyo, Tokyo, Japan).
Proteins from the blade, stipe, and rhizoid of S. japonica sporophyte were extracted under denaturing conditions, as previously described 40 . After separation by SDS-PAGE, each protein sample was transferred by electroblotting onto a nitrocellulose membrane (Atto, Tokyo, Japan). The anti-SjAly antibody was used as the primary antibody, followed by the administration of anti-rabbit IgG secondary antibodies conjugated with horseradish peroxidase (Sigma-Aldrich). The reaction signal was detected using ECL prime western blotting detection reagent (GE Healthcare Life Sciences, Pittsburgh, PA).