CRISPR/Cas9 targeted CAPTURE of mammalian genomic regions for characterization by NGS

The robust detection of structural variants in mammalian genomes remains a challenge. It is particularly difficult in the case of genetically unstable Chinese hamster ovary (CHO) cell lines with only draft genome assemblies available. We explore the potential of the CRISPR/Cas9 system for the targeted capture of genomic loci containing integrated vectors in CHO-K1-based cell lines followed by next generation sequencing (NGS), and compare it to popular target-enrichment sequencing methods and to whole genome sequencing (WGS). Three different CRISPR/Cas9-based techniques were evaluated; all of them allow for amplification-free enrichment of target genomic regions in the range from 5 to 60 fold, and for recovery of ~15 kb-long sequences with no sequencing artifacts introduced. The utility of these protocols has been proven by the identification of transgene integration sites and flanking sequences in three CHO cell lines. The long enriched fragments helped to identify Escherichia coli genome sequences co-integrated with vectors, and were further characterized by Whole Genome Sequencing (WGS). Other advantages of CRISPR/Cas9-based methods are the ease of bioinformatics analysis, potential for multiplexing, and the production of long target templates for real-time sequencing.

Considerable effort has been devoted to developing 'target-enrichment' methods, in which genomic regions are selectively captured from a DNA sample before sequencing. The rationale for those efforts is that sequencing the retained genomic regions is more time and cost-effective than whole-genome sequencing (WGS), with the added benefit of data being considerably less cumbersome to analyze.
The most common techniques that have existed for some time can be categorized according to the nature of their core reaction principle. In the "hybrid capture" method, nucleic acid strands derived from the input sample are hybridized specifically to prepared DNA fragments complementary to the targeted regions of interest, either in solution or on a solid support, so that one can physically capture and isolate the sequences of interest. There are several popular commercial solutions for this -SureSelect and HaloPlex from Agilent Technologies, xGen from Inegrated DNA Technologies (IDT), Ion TargetSeq from Life Technologies, -all adapted from the hybrid selection method originally developed by Gnirke et al. 1 . These assays place a premium on performance and are cost effective if used for parallel characterization of the same genomic region in multiple samples. However, these methods become cost-prohibitive for one-time use on a single genomic locus. Also, the fragment sizes utilized by current DNA target enrichment technologies remain a limiting factor, producing DNA fragments generally shorter than 1 Kb. In the "selective circularization" methods (e.g. MIPs 2,3 , gap-fill padlock probes 4 , selector probes 5 ) single-stranded DNA circles containing the target region sequences are formed (by gap-filling and ligation chemistries) in a highly specific manner, creating structures with common DNA elements that are then used for selective amplification of the targeted regions. PCR amplification methods can be directed toward the targeted regions by conducting either multiple long-range PCRs in parallel, a limited number of standard multiplex PCRs, or using highly multiplexed PCR methods that amplify very large numbers of short fragments. However, these methods heavily rely on PCR amplification, which may result in artifact sequence junctions that are difficult to distinguish from real ones. Recently, a targeted locus amplification (TLA) method has been developed on the basis of the crosslinking of physically proximal sequences 6 . This technique allows re-sequencing and haplotyping of long multikilobase genomic regions, but the method is not easily implementable. Given the Results CRISPR/Cas9 target capture protocols. In vitro CRISPR/Cas9 methods use biotin-labeled RNA-guided engineered nucleases (RGEN) to specifically bind to targeted regions and enable either the isolation of the targeted DNA fragments from the population of gDNA, or cleave the targeted regions and produce double-stranded breaks that can be further enzymatically labeled by biotin and isolated from the mixture of genomic fragments. The purified target DNA fragments are then used for NGS library construction and sequencing. Three different Cas9 RGEN protocols have been developed and tested using three CHO-K1-based cell lines, AE54SL, AD49ZG and AD49ZH, all bearing integrated vectors with immunoglobulin transgenes.
In both RGEN-R and RGEN-TdT protocols ( Fig. 1) gDNA is first sheared using routine methods to make long, >20 Kb fragments, which are then treated with a DNA polymerase and ddNTP to block free 3′ DNA ends (step 1). Next, Cas9 nuclease is incubated with an appropriate single-guide RNA (sgRNA) to form RGEN that is then used to cleave ddNTP-treated DNA fragments at a targeted site, resulting in blunt-ended DNA fragments (step 2). In the RGEN-R protocol, a short double-stranded DNA (dsDNA) adapter with a site for a rare-cutter restriction enzyme and containing a biotin molecule at the free 5′-end is ligated to the cleaved DNA fragment (step 3). DNA fragments containing a ligated biotinylated adapter are then isolated from the DNA mixture using streptavidin-coated magnetic beads and released from the beads by digestion with the desired restriction enzyme (step 4). In the RGEN-TdT protocol, in place of the adapter ligation step, the DNA fragments are labeled by TdT-mediated dUTP-biotin end-labeling (TUNEL) 20 and purified using streptavidin-coated magnetic beads. Single stranded DNA (ssDNA) fragments are released after heat or chemical treatment of the biotin-streptavidin complexes. Depending on the yield, in both protocols the released DNA fragments may require whole genome amplification using available chemistries before proceeding with NGS library construction (step 5).

RGEN ds breaks in fragmented gDNA (step 2)
Random fragmenta on (20-30 kB) and ddNTP treatment (step 1) It is interesting to note that an earlier variant of the RGEN-TdT without a ddNTP pre-treatment step failed to meaningfully enrich the targeted loci (Supplementary Table 2). Only after introducing this step the RGEN-TdT protocol resulted in drastic enrichment of the vector integration region. It is apparent that pre-treatment of the genomic DNA with Klenow fragment and ddNTP prevents nonspecific biotin labeling of the DNA by TdT. Another useful step that increased the RGEN-TdT sensitivity is addition of dATP alongside with biotin-16-dUTP to the labeling mix to increase the number of biotin-modified nucleotides at the 3′-OH DNA termini 20 . TdT prefers dATP as a substrate and can add up to five times more dATP than other nucleotides at an identical concentration. Hence, dATP was included in the labeling mix to increase the length of the end-labeling and consequently the number of biotin-modified nucleotides added to the termini of each DNA break. This increased the efficiency of DNA binding to streptavidin magnetic beads.
In the RGEN-D protocol 3′-biotinylated sgRNAs and a mutant, inactive Cas9 protein are used to generate biotin-labeled RGENs that can only bind, but not cleave targeted loci at the binding sites ( Fig. 2A). Alternatively, a biotinylated, inactive Cas9 protein can also be used (Fig. 2B). Biotin-labeled RGENs (about one RGEN per 2-3 Kb stretch of DNA) are incubated with fragmented gDNA (~5 Kb fragments) and then RGEN-DNA complexes are isolated from the DNA mixture either using streptavidin-coated magnetic, followed by RNAse A and Proteinase K treatment to release dsDNA fragments. Purified DNA fragments are then used for TruSeq ® Illumina ® library construction and sequencing.
A summary of several target enrichment experiments with three different protocols (RGEN-TdT, RGEN-D (A), and RGEN-R (Figs 1 and 2)) and using two different CHOK1-derived clones are presented in Table 1. All experiments were designed as proof-of-principal to demonstrate the utility of Cas9 proteins for selective enrichment of DNA. For the RGEN-R and RGEN-TdT protocols, a single target site for Cas9 cleavage was identified in the middle of the 11,489 bp integration vector pCLD1 (gRNA1), while five target sites were chosen for the RGEN-D (A) protocol (Supplementary Table 1, Fig. 5). To assess the enrichment efficiency, we used, in all cases, a comparative ∆∆C T TaqMan Assay 21 . This assay was designed for estimating the copy number fold change of a targeted sequence in the enriched DNA sample relative to the target's "normal" copy number in the control DNA sample.
Following isolation of the target DNAs by the described protocols, we used Illumina ® sequencing by synthesis to characterize the targeted DNA regions and estimate the level of enrichment. The RGEN-TdT's (AD49ZG and AD49ZH clones) and RGEN-D's (AD49ZG clone) captured DNAs were sequenced using Illumina TruSeq Nano  (Table 2). This is close to the 17.1X value obtained by ∆∆C T TaqMan method (Table 1). It is interesting that seemingly identical RGEN-D (A) and (B) protocols (Fig. 2) result in substantially different enrichment of the target region ( Table 2). As seen in Tables 1 and 2, the highest enrichment between different RGEN protocols is consistently achieved using the RGEN-TdT protocol. www.nature.com/scientificreports www.nature.com/scientificreports/ structure of the Integration Loci. Because RGEN protocols isolate all DNA fragments in close proximity to the vector integration site, it is possible to identify surrounding host system (e.g. CHO-K1) sequences, in addition to the adjacent vector sequence. The only challenge is the selection of proper reference genomes for mapping analysis. In the case of Chinese hamster and CHO cell lines it is difficult due to the lack of a complete reference genome assembly. Therefore, to characterize the sites of vector integration, we created custom reference genomes comprised of CHO-K1 chromosomes, a corresponding integration vector and Escherichia coli K-12 MG1655 (E. coli) fasta sequences as pseudochromosomes (see METHODS for details). The use of custom chromosome-based reference genomes has simplified the analysis and presentation of vector integration events, and allowed visualization of associated chromosomal rearrangements. Moreover, such an approach is fully compatible with popular structural variation (SV) callers and pipelines (SpeedSeq. 22 , Manta 23 , Lumpy 24 , Delly 25 ), allowing their usage without modification, obtaining results in the standard VCF format. We also used an in-house custom genomic stability (GS) pipeline to identify read pairs where one read is fully or partially mapped to a vector sequence, but paired or mate paired reads are unmapped. Assembling these reads followed by Basic Local Alignment Search Tool (BLAST 26 ) analysis of resulting contigs against a reference genome results in identifying all vector|vector and/or vector|chromosome breakpoints. An example of this pipeline run is provided in the Supplemental Information.

RGEN-D
AE54SL cell line. Both the RGEN-D and xGen targeted capture protocols, as well as WGS, identified two vector fusion breakpoints in the AE54SL cell line (Fig. 3). However, the vector copy number per genome can be estimated only from the WGS data (Table 2), based on the average aligned read depth of the Illumina ® WGS datasets across the genomes (Supplementary Table 2), and which we consider the diploid baseline. Thus, a mean per chromosome coverage is 1/2 of the diploid baseline and this value is used for the vector copy number calculation in all cases ( Table 2).
The xGen protocol (IDT) results in extremely high coverage across the vector, which is not surprising as this protocol relies on two rounds of NGS library amplification by PCR. It has therefore a great potential for multiplexing and/or can be run on a low output sequencer (e.g., on an Illumina ® iSeq100). However, for the very same reason (two rounds of amplification), it also may result in PCR chimeras, which are impossible to separate from real fusion breakpoints without verification of all junctions by separate method(s) [27][28][29] . For example, it resulted in three false positives in this clone: fusions between positions 7276|6304C, and 7247|11081C (vector chimeras), as well as a fusion between 4152|6,881,753 (vector|CHO chr10 chimera). These specific chimeric junctions are absent in both the PCR-free RGEN-D and WGS data sets.  www.nature.com/scientificreports www.nature.com/scientificreports/ The only vector "head-to-head" junction together with the only chromosome-vector fusion breakpoint in this clone (Figs 3 and 4) suggest a recombination event involving the vector (pGMX) in a head-to-head duplication with the upstream region of chromosome 10 (the letter of unknown size due to limitations in the technology).
Using the corresponding WGS data, we looked more closely at this region, leveraging both depth of coverage (DOC) of chromosome 10 and discordant pair-end mapping techniques to establish a sequence of events that best explains the observed copy number and SVs. Figure 4 illustrates some of the CGRs in chromosome 10 of this clone. Comprehensive analysis of this region revealed vector pMGX ( Fig. 3) was integrated into one copy of the amplified ~220 kb fragment at chromosomal position 6,863,078. Multiple copies of this region are also present in the AE63XG genome, which is the parental cell line used for transfection with pGMX to generate the AE54SL clone, though its copy number in the AE54SL chromosome 10 is higher (approximately 10 vs 7 copies; see Supplementary Fig. 2 and 4). The subsequent inverted vector duplication probably occurred upon replicative recombination within the expanding repeat with concurrent loss of the 3′ flanking chromosomal sequence. The whole vector-containing ~220 bp segment then underwent a duplication. The further rearrangements are difficult to reconstruct, particularly the occurrence of several regions after position 6,003,515 with high depth of coverage (Fig. 4). The WGS sequencing read coverage of the pMGX vector is consistent with its four-copy number presence in the AE54SL genome (Table 2).  Supplementary Fig. 4), the observed DOC indicates the presence of one intact chromosome, while two or even 4 more copies formed isochromosomes. Such event(s) would create a partial monosomy of the 6 Mb region at the 5′ end of chromosome 10 and a trisomy of the remaining ~8.7 Mb portion. At least one putative isochromosome has the 354 bp unique loop (colored blue) and ~300 kb deletion (mR) in one arm.  www.nature.com/scientificreports www.nature.com/scientificreports/ AD49ZG and AD49ZH cell lines. The DNA from these cell lines was analyzed by CRISPR/Cas9-based RGEN-TdT protocols and the results were compared with the hybridization capture xGen protocol, TLA, and with WGS (data sets generated using both Illumina ® and PacBio systems) ( Table 2). The WGS data suggests there are four pCLD1 vector copies in the AD49ZG (Table 2)  Owing to long DNA fragments pulled down by RGEN-TdT in combination with a relatively large (up 1 kb) insert NGS library made from these pulled fragments (Supplementary Table 2), we recovered the integrated ~10.5 kb of pCLD1 vector sequence and, unexpectedly, a ~1 kb of Escherichia coli (E. coli) sequence merge with the vector. Further analysis using the WGS data revealed about 150 Kb of an E. coli K-12 MG1655 genome co-integrated with the pCLD1 vector into chromosome 7 in an intricate way, resulting in the ~355 Kb integration locus ( Fig. 6; Supplementary Figs 7 and 8). This suggests that fragments of contaminating E. coli DNA in plasmid preparations were co-integrated with the vector. A similar finding was recently reported during the analysis of mouse transgenic sites using the TLA method 31 .
It is interesting that E. coli genes encoded by the insert show high level of transcription as revealed by RNA sequencing of total RNA isolated from AD49ZG cells (see Methods). It appears that transcription of insert genes is driven by vector-encoded transgene promoter (Fig. 6). However, only three reliably detected proteins out of a total of 5,358 identified by LC-MS/MS (Supplementary Table 4) are encoded by the insert, and all three are derived from the vector fragments of the insert (C. griseus glutamine synthetase (GS), E. coli β-lactamase, and an E. coli 55 kDa hypothetical protein; Fig. 6A). There might be also a forth protein derived from the E. coli part of the insert (RNA 2′-phosphotransferase) but the spectral count of this protein is too low to be confident in its expression (Supplementary Table 4). Though the significance of the integrated and transcribed E. coli sequences is unclear, prior reports have shown that bacterial sequences covalently attached to expression cassettes can contribute to gene silencing 32 .
Analysis of the related AD49ZH clone (transfected with the same pCLD1 vector) revealed two host|vector junctions in chromosome 3 (84,250,935|<−499 and 486 <−|124888077) and no vector|vector fusions. It is worthy to note that data generated with the xGen protocol suggests another vector concatenation junction 8,525|8,548, which is unsupported by both the RGEN-TdT protocol and WGS, and therefore is likely a PCR artifact. TLA data also supports the same two host|vector junctions in chromosome 3 in the AD49ZH clone but also, report multiple false positive vector breakpoints (data not shown). While the two host|vector fusion breakpoints are in different scaffolds (likely both corresponding to regions of chromosome 3, data not shown), the chromosomal coverage around the breakpoints is over 30X of the average genome average, suggesting that the integration happened in a misassembled amplified chromosomal region. Since pCLD1 is present in 20 copies in AD49ZH, it is possible that a vector monomer have integrated into a single repeat unit, which expanded further (20X) after this event. www.nature.com/scientificreports www.nature.com/scientificreports/

Discussion
This study explores the enrichment of long DNA fragments from mammalian genomes using the CRISPR/ Cas9 system for specific targeting of genomic loci. Compared to other popular targeted techniques, like hybridization-based xGen or TLA, our RGEN protocols do not use PCR amplification and thus are essentially free from PCR-introduced chimeric junctions. Being able to enrich for long DNA fragments, the RGEN protocols give a wider range of possibilities for sequencing of complex genomic regions that cannot be studied with other methods. While we only used Illumina's ® sequencing technology to assess the RGEN methods, the isolated fragments may also serve as suitable input material for the third-generation long-range sequencing systems like Oxford Nanopore's MinION system.
Although the described RGEN methods can be used on an as is basis, we have identified several bottlenecks in these protocols, which if eliminated, could increase the target enrichment substantially. For example, the RGEN-R protocol would benefit from optimizing the oligonucleotide duplex ligation to long genomic fragments, for instance, by using a recently described type II-B FnCas9 from Francisella novicida 33 that cleaves the target DNA to leave 4-nt 5′-overhangs, and from improved restriction digestion of the ligated duplex. The latter can be achieved by varying the length of an oligo and trying different restriction endonucleases. In the RGEN-TdT protocol, care should be taken to not introduce new single and/or double stranded breaks after the ddNTP pre-treatment of genomic DNA as such newly generated non-specific breaks reduce the enrichment efficiency. Also, the binding specificity and efficiency of biotinylated multi-kilobase DNA fragments to streptavidin beads, as well as the fragment recovery, needs to be improved in all methods. The beads binding protocols and buffers are mostly designed for capturing relatively short DNA fragments. Long fragments have a greater chance to bind non-specifically to beads, thus decreasing the fold of target enrichment. This step would benefit from optimization of beads binding/washing buffers.
We have demonstrated the utility of the RGEN protocols by capturing and determining, through sequencing, the fusion breakpoints in loci of three CHO-derived cell lines that are associated with integrated vectors. The seemingly simple task of identifying vector integration boundaries in hamster genomes is not as simple as in human or mouse cell lines. This is because of a lack of a high quality assembly of the Chinese hamster or CHO genomes 34 and because of the inherent nature of aneuploidy and continuing chromosomal rearrangement in CHO cells 17,35 . The cell lines investigated in this work illustrate the complexity of this problem and highlight the limitations of target enrichment protocols in general. We were able to determine entire structures of integration loci only in combination with whole genome sequencing.
Interestingly enough, in two out of three CHO-K1 cell lines studied here vector integrations occurred in unstable high copy number chromosomal regions (see Supplementary Figs 2 and 4). If this is a wide spread phenomenon, then such recombinant transgene producing clones may undergo further rearrangements involving the integration site 36 , with unpredictable phenotypic consequences. Given our findings, and the different chromosomal stability in CHO cells 19 (Supplementary Figs 2 and 4) it might be attractive for the industry to move away from making recombinant CHO cell lines by random transgenesis and adopt CRISPR/Cas9 assisted locus targeting or other precise gene targeting modalities 37 as more robust approaches to construct stable cell lines. Identification of neutral loci on stable chromosomes appears to be attractive candidate locations for establishing high-yielding CHO cell lines.   Table 3 and Supplementary Fig. 11).

CHO-K1 Cell Lines and
www.nature.com/scientificreports www.nature.com/scientificreports/ (BLI). The highest expressing pools were used for cloning via limiting dilution in 20% conditioned media/80% EX-CELL CHO Cloning Media. Clonality was determined based upon visual inspection five days post-plating and IgG secretion of all clones was monitored via BLI. The top expressing clones were scaled up, banked and tested for stable IgG secretion in a 70-generation stability assay. primers and sgRNAs. DNA sequence information from the genome assembly CHOK1GS_HDv1 38 (GCA_900186095.1) of the Chinese hamster ovary cell line CHOK1 was used for designing guide RNAs. The following web resources were used for selecting primers and crRNA sequences: http://chopchop.cbu.uib.no (a webtool for crRNA design 39 ), NCBI's Primer-BLAST https://www.ncbi.nlm.nih.gov/tools/primer-blast/, and ThermoFisher's Multiple Primer Analyser. All oligonucleotides (both modified and unmodified ones) were synthesized by IDT, TaqMan probes were ordered from ThermoFisher. Sequences of primers and crRNA target sites are provided in Supplementary Table 1. Single-guide RNAs were prepared by IDT's method; custom synthesized 36-mer crRNAs were annealed to universal 67-mer tracrRNA. In the RGEN-D protocol tracrRNA contained biotin at the 3′-end.

Comparative C t (threshold cycle) method of real-time PCR.
In this method 21 , which is typically used for gene expression profiling, the real-time PCR data is presented relative to another gene which is often referred to as an internal control. Accordingly, PCR amplicons were designed for the vectors that either span the RGEN cut site inside the vector sequence or are positioned in close proximity to the cut site to serve as an internal control. Upon cleavage of gDNA with RGEN(s), the amount of PCR amplicon spanning the RGEN cut sites diminishes depending on the efficiency of RGEN cleavage, while upstream and/or downstream internal control amplicons stay unaffected, thus allowing calculation of percentage of cleavage. An example of this method for evaluation of the RGEN-1 cleavage efficiency is provided in the Supplementary Fig. 12.
Comparative ∆∆C t taqMan Assay. This assay was designed for estimating the degree of depletion of non-target sequence versus target sequence as a result of the capture. Based on this assay, a decision is made about NGS library construction. Two TaqMan probes are used in the assay, one designed for a target region, which is the common region in the transgene sequences in vectors pCLD1 and pMGX (ThermoFisher's TaqMan assay Hs00378230_g1), while the other is chosen outside of the target region (Cgr Spag5 gene region; ThermoFisher's Taqman assay Cg04462858_g1) and serves as an internal control. TaqMan probes in the assays are labeled with different fluorescent dyes (FAM ™ and VIC ™ ) and can be conveniently used on the same DNA template in one tube. This greatly decreases all experimental errors associated with pipetting and using separate tubes. The following equation is used to compare the target sequence enrichment in two different samples (untreated and treated DNA samples): Fold change = − ΔΔ 2 C T = [(C T target sequence amplicon − C T internal control amplicon)treated DNA − (C T target sequence amplicon − C T internal control amplicon)untreated DNA)].

DNA Preparation for NGS in RGEN-R Protocol. Genomic DNAs were isolated using QIAGEN's EZ1
and DNeasy Blood & Tissue kit. To digest target sequences in the genome, Cas9 protein (2-10 μg) (New England Biolabs (NEB)), which had been preincubated with sgRNA1 at room temperature for 15 minutes to make RGEN-1, was mixed with genomic DNA (10-20 μg) in a Cas9 reaction buffer with added 1 M betaine and 50 µg/ml bovine serum albumin (BSA) and incubated at 37 °C for 8 hours. Digested genomic DNA was purified again after incubation with RNase A (50 μg/mL) for 1 hour at 37 °C followed by incubation with Proteinase K (50 μg/mL) for 1 hour at 50 °C. A single ' A' nucleotide was added to the 3′ ends of the blunt fragments using NEB's A-tailing protocol with Klenow Fragment. A corresponding single 'T' nucleotide on the 3′ end of the adapter provides a complementary overhang for ligating the adapter to the fragment. The duplex adaptor (1 pM) with a biotinylated 5′-end and containing a site for rare cutting restriction endonuclease AsiSI was ligated to A-tailed DNA ends using the Quick Ligation Kit (NEB). Double stranded biotinylated DNA molecules were then immobilized to streptavidin magnetic beads using Dynabeads kilobaseBINDER kit (ThermoFisher) according to the manufacturer's recommendations, and then subsequently released by digestion of the ligated adaptor with AsiSI. The enrichment of the targeted locus was estimated by comparative ∆∆C T TaqMan assay.

DNA Preparation for NGS in RGEN-TdT Protocol. Isolation and digestion of genomic DNA with
RGEN-1 was performed as described in the RGEN-A protocol. In the initial variant of this protocol, to demonstrate the specific capture and sensitivity of DNA strand breaks in vitro, RGEN-1 treated DNA was directly labeled by the terminal deoxynucleotidyl transferase-mediated dUTP-biotin end-labeling (TUNEL) using a recombinant terminal transferase (TdT) and according to the standard tailing protocol from the supplier (NEB). Briefly, 15 µg of digested gDNA was incubated in TUNEL reaction mix containing 5 mM CoCl 2 , 0.20 mM of biotin-16-dUTP, and 1600 U of TdT at 37 °C for 1 hour in a final volume of 70 µL. The end-labeling reaction was arrested by heating the reaction mix at 70 °C for 10 min. To remove TdT, Zymo Research's DNA Clean & Concentrator-25 columns were used. It was noticed that this step may result in significant loss during purification. As an alternative LiCl/ ethanol precipitation can be used. Labeled DNA molecules were immobilized to streptavidin magnetic beads using Dynabeads kilobaseBINDER kit (ThermoFisher) and then subsequently released according to the protocol from the supplier. After purification with QIAGEN's MinElute PCR purification kit, DNA was double-stranded/ amplified with Illustra GenomiPHI kit (GE Life Sciences) and the enrichment was evaluated using comparative ∆∆C T TaqMan assay. The enrichment of the targeted locus using the improved RGEN-TdT method was estimated by comparative ∆∆C T TaqMan assay. www.nature.com/scientificreports www.nature.com/scientificreports/ DNA Preparation for NGS in RGEN-D Protocol. Instead of non-labeled tracrRNA, tracrRNA biotinylated at the 3′ end was used in the RGEN-D (A) protocol. To make individual biotinylated sgRNAs, equal volumes of tracrRNA-3′-biotin and each of crRNAs were incubated at 95 °C for 2 minutes and cooled down to room temperature. dCas9 (NEB, EnGen Epy dCas9) protein (2-10 μg), was then incubated with equimolar mixture of sgRNA1-5 (vector pCLD1) or sgRNA6-10 (vector pGMX) (Figs 5 and 6 and Supplementary Table 1) at room temperature for 15 minutes to make the corresponding RGENs. Sonicated genomic DNA (10-20 μg, 5 kb average size) was mixed at room temperature for 20 minutes with RGENs conjugated to 50 μL of Dynabeads -Streptavidin M280 beads. RGEN-Dynabeads conjugation was performed in Cas9 reaction buffer with added 1 M betaine and 50 µg/mL BSA, at room temperature for 15 minutes. RGEN-Dynabeads with bound DNA were washed four times with 0.3 mL of modified low salt buffer in the presence of 0.05% Triton. The captured RGEN-DNA complexes were treated with RNase A and Proteinase K. DNA was purified using ChIP DNA Clean & Concentrator (Zymo Research). Alternatively, bound DNA was released from the beads by treatment with 95% Formamide at 65 °C for 5 minutes followed by DNA purification using microspin G-50 colums (GE Lifesciences). Released DNA was amplified using the Illustra GenomiPhi kit (GE Lifesciences) before proceeding with NGS library preparations.
In the RGEN-D (B) protocol, all steps were the same as above, except non-labeled tracrRNA and dCas9-3XFLAG ™ -Biotin Protein (MilliporeSigma) were used.

Construction of Genomic Libraries for NGs and sequencing.
Captured DNA (AE54SL, AD49ZG, and AD49ZH clones) and genomic DNA (clone AE63XG) fragmentation was performed using a Covaris S220 system and appropriate consumables and protocols. Typically, DNA was fragmented to 500 bp. Fragmented genomic DNA was ligated with adaptors using Illumina's TruSeq Nano DNA Library Prep kit or the Nextera XT kit in case of xGen protocol (IDT). The concentration of the libraries was determined using the KAPA Library Quantification Kits for Illumina platforms (Kapa Biosystems). Libraries were sequenced using an Illumina ® MiSeq sequencer in a paired-end mode with 301 (in some cases with 76 and 251) cycles per read. For Nextera XT libraries, the DNA was enzymatically "tagmented" in lieu of fragmentation. The PCR duplication rate in xGen protocols was calculated using a computational method of Bansal 40 to estimate the average PCR duplication rate that accounts for natural read duplicates by leveraging heterozygous variants in a genome. PCR-free libraries of AD49ZG and AD49ZH genomic DNAs were prepared and sequenced by Macrogen Inc. One library per sample was constructed using Illumina's TruSeq PCR Free Library Preparation kit with insert size of 550 bp. Sequencing was performed using the Illumina HiSeq2500 system with 250 bp paired-end sequencing method. Each library was sequenced over one entire flowcell, which contains two lanes. Each flowcell produced over 700 M reads and resulted in ~70X coverage for both DNA samples.
For PacBio SMRT sequencing of the AD49ZG genomic DNA, SMRTbell DNA template libraries (insert size of ~20 Kb) were prepared according to the manufacturer's specification followed by size selection using Sage Science's BluePippin instrument to remove short molecules. SMRT sequencing (10 SMRT cells) was performed on the Pacific Biosciences Sequel System by Macrogen Inc.
Reconstruction of CHOK1 Chromosomes. For the characterization of integration loci we used Cricetulus griseus GenBank assembly GCA_000448345.1 (Cgr1.0) and the most recent draft genome assembly CHOK1GS_ HDv1 (GenBank assembly accession GCA_900186095.1) of the Chinese hamster ovary cell line CHOK1 38 . The last assembly contains the fewest number of scaffolds compared to previous CHO cell lines assemblies [41][42][43][44] ; in some cases scaffolds approach the size of individual chromosomes. Brinkrolf et al. 41 isolated, by flow cytometric cell sorting, Cricetulus griseus (C. griseus) chromosomes and sequenced them individually. This has made possible the assignment of scaffolds to most of C. griseus chromosomes (Cgr1.0 assembly 41 ). Using their data as well as data of Wlaschin and Hu 45 , corresponding scaffolds from the CHOK1GS_HDv1 assembly were concatenated to make chromosomes 1-8, and X. Because chromosome 1 exceeds 2 27 bp, it was split into two equal parts (referred to as chr0 and chr1) for compatibility with different bioinformatics tools used for the analysis. Remaining scaffolds belonging to chromosomes 9, 10, and Y were not assigned to individual chromosomes in the original work because chromosomes 9 and 10 could only be separated as a pool and chromosome Y was not sorted at all during sequencing 41 . We found, however, a way to assign scaffolds between chromosomes 9 and 10 and properly orient them within respective chromosomes in silico, using corresponding CHOK1GS_HDv1 scaffolds, a good synteny of these scaffolds with an internal region of the mouse chromosome 15, and our data on chromosomes coverage ( Supplementary Fig. 1). Scaffolds belonging to chromosome 7 were also oriented based on the synteny with mouse chromosomes 11, 12, 16, and 17 ( Supplementary Fig. 2). All other unplaced scaffolds were combined into pseudochromosome Y.
processing DNA sequencing Data. Illumina NGS data analysis followed an established approach that included (i) raw data pre-processing, (ii) mapping of reads to reference genome, and (iii) extracting mapping information and sequence context of vector integration site(s). A customized reference genome for each CHO cell clone represented a fasta sequence file of reconstructed CHO-K1 chromosomes with a corresponding vector sequence and E. coli genome (RefSeq NZ_CP017100.1) as a pseudochromosomes. We found that external data pre-processing (i.e., adapter and quality trimming) can be safely skipped as adapter trimming can be done by the instrument software (e.g., MySeq Reporter) during raw data processing, and quality trimming was generally not required. Thus, in most cases machine generated fastq files were directly used for mapping to reference genomes. For mapping Illumina sequencing reads and for extracting and visualizing sequence context of vector integration sites, Burrows-Wheeler Aligner (bwa mem) 46 , samtools 47 , bbmap package 48 , and IGV 49 or Consed 50 programs were used. An example of a minimal analysis session is provided in the Supplemental Information. We also used Ribbon 30  www.nature.com/scientificreports www.nature.com/scientificreports/ For building reference depth of coverage (DOC) maps of C. griseus chromosomes, we downloaded from NCBI SRA archive 336 M reads (BioProject PRJNA167053) and mapped them to our customized reference genome (without vector and E. coli pseudochromosomes).
PacBio sequencing reads were aligned with NGM-LR 52 and SVs were called with Sniffles 52 , which is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs (10 bp+) using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Illumina HiSeq2500 251-bp paired reads   (total 713,405,402 reads; Supplementary Table 2) were mapped with bwa mem to a combined reference sequence containing the CHOK1GS_HDv1 assembly, E. coli K-12 MG1655 genome (Genbank accession number NZ_ CP017100.1), and the pCLD1 vector sequence (Supplementary Figure XX). Similarly, starting with 10 SMRT cells, 5,210,389 uncorrected continuous reads longer than 1000 bases were obtained, merged together into a single dataset, and mapped with NGM-LR 52 to the combined reference sequence. Using samtools 47 to identify read names from an Illumina bam file mapped to E. coli and pCLD1 sequences, a unique list of corresponding read pairs was created and then used by BBTools 53 to extract paired read sequences from the HiSeq2500 dataset. Pacbio subreads mapped to E. coli and pCLD1 sequences were extracted in fasta format from a corresponding bam file in a similar way. The total 44,850 vector-and E. coli-mapped HiSeq2500 reads were then assembled by spades 54 (v. 3.11.1), while 326 Pacbio subreads were assembled separately by canu 55 ; spades was also used for a hybrid assembly of the pCLD1-E. coli insert using both HiSeq2500 reads and Pacbio subreads. The final insert sequence was produced in Consed 50 after manual evaluation of three different assemblies ( Supplementary Figs 9  and 10).

AD49ZG Transcriptome Sequencing and Analysis.
Total RNA was extracted from 10 6 AD49ZG cells using the RNeasy Mini kit (QIAGEN) following the manufacturer's protocol. The purity and yield of total RNA was analyzed using the Quant-It ™ RNA Assay Kit (Life Technologies) and SpectraMax M2 plate reader (Molecular Devices). The RNA integrity was confirmed by the Agilent 2100 Bioanalyzer system (Agilent Technologies). Two samples of 1 µg each with an RNA integrity number value greater than 8 were used for preparation of sequencing libraries using TruSeq ™ Stranded Total RNA Sample Preparation Kit (Illumina ® ) and protocol (fr-firststrand libraries). The library concentration was determined with the KAPA Library Quantification kit for Illumina platforms (Kapa Biosystems). RNA sequencing was performed using a paired-end strategy (each end with 300 bases) on the Illumina ® MiSeq instrument.
Adaptor trimmed fastq files from two MiSeq runs were combined (total 117 M reads) and second reads (read2) were mapped to the customized AD49ZG genome containing CHO-K1 chromosomes and the ~320 kb assembled integration sequence. Reads were aligned to the reference with Burrow-Wheeler Aligner (BWA) 46 .

AD49ZG Total Protein Profiling with LC-MS/MS. Sample Preparation.
The cell pellet (10 7 cells) was suspended in 400 μL of modified RIPA buffer (2% SDS, 150 mM NaCl, 50 mM Tris.HCl pH8, 1X Roche Complete protease inhibitor) and sonicated using a sonic probe (QSonica) with the following settings: Amplitude 50%, Pulse 10 × 1 s. 1 on 1 off. The protein concentration of the lysate was determined by Qubit fluorometry (Invitrogen). 20 μg of protein was processed by SDS-PAGE using a 4-12% Bis-Tris NuPAGE mini-gel (Invitrogen) with the MOPS buffer system. The gel lane was excised into forty equally sized bands and in-gel digestion with trypsin was performed on each using a ProGest robot (Digilab) with the protocol outlined below.
• Washed with 25 mM ammonium bicarbonate followed by acetonitrile • Reduced with 10 mM dithiothreitol at 60 °C followed by alkylation with 50 mM iodoacetamide at room temperature • Digested with trypsin (Promega) at 37 °C for 4 hours • Quenched with formic acid and the supernatant was analyzed directly without further processing.
Mass Spectrometry. Half of each digested sample was analyzed by nano LC-MS/MS with a Waters NanoAcquity HPLC system interfaced to a ThermoFisher Q Exactive mass spectrometer. Peptides were loaded on a trapping column and eluted over a 75 μm analytical column at 350 nL/min; both columns were packed with Luna C18 resin (Phenomenex). The mass spectrometer was operated in data-dependent mode, with the Orbitrap operating at 70,000 FWHM and 17,500 FWHM for MS and MS/MS respectively. The fifteen most abundant ions were selected for MS/MS. Data Processing. Data were searched using a local copy of Mascot with the following parameters: www.nature.com/scientificreports www.nature.com/scientificreports/ Mascot DAT files were parsed into Scaffold (Proteome software) for validation, filtering and to create a non-redundant list per sample. Data were filtered using at 1% protein and peptide FDR and requiring at least two unique peptides per protein.

Data Availability
Complete sequencing data have been deposited in the Sequence Read Archive (SRA) under the accession number SRP151278.