Article | Open | Published:

Unique skull network complexity of Tyrannosaurus rex among land vertebrates

Scientific Reportsvolume 9, Article number: 1520 (2019) | Download Citation

Subjects

Abstract

Like other diapsids, Tyrannosaurus rex has two openings in the temporal skull region. In addition, like in other dinosaurs, its snout and lower jaw show large cranial fenestrae. In T. rex, they are thought to decrease skull weight, because, unlike most other amniotes, the skull proportion is immense compared to the body. Understanding morphofunctional complexity of this impressive skull architecture requires a broad scale phylogenetic comparison with skull types different to that of dinosaurs with fundamentally diverging cranial regionalization. Extant fully terrestrial vertebrates (amniotes) provide the best opportunities in that regard, as their skull performance is known from life. We apply for the first time anatomical network analysis to study skull bone integration and modular constructions in tyrannosaur and compare it with five representatives of the major amniote groups in order to get an understanding of the general patterns of amniote skull modularity. Our results reveal that the tyrannosaur has the most modular skull organization among the amniotes included in our study, with an unexpected separation of the snout in upper and lower sub-modules and the presence of a lower adductor chamber module. Independent pathways of bone reduction in opossum and chicken resulted in different degrees of cranial complexity with chicken having a typical sauropsidian pattern. The akinetic skull of opossum, alligator, and leatherback turtle evolved in independent ways mirrored in different patterns of skull modularity. Kinetic forms also show great diversity in modularity. The complex tyrannosaur skull modularity likely represents a refined mosaic of phylogenetic and ecological factors with food processing being probably most important for shaping its skull architecture. Mode of food processing primarily shaped skull integration among amniotes, however, phylogenetic patterns of skull integration are low in our sampling. Our general conclusions on amniote skull integrity are obviously preliminary and should be tested in subsequent studies. As such, this study provides a framework for future research focusing on the evolution of modularity on lower taxonomic levels.

Introduction

The hypercarnivore Tyrannosaurus rex (Theropoda) is an icon of paleontology and evolution. Its unique anatomy, including an immense skull and small forelimbs, has inspired a number of morphofunctional experiments1,2. Its skull length is about a sixth of the total body length, and cranial performance analyses resulted in reconstructions of a very powerful bite force3,4,5,6,7. In addition to the ancestral temporal fenestrae, large cranial openings in the snout and the lower jaw are thought to decrease skull weight and to better distribute strain when processing food, but also other morphofunctional reasons have been discussed such as specific muscle insertions, shock absorption, pneumaticity, and internal skull mobility6,8,9. As a result, the skull shows a complex architecture made of several bone bars, typical also for other theropod dinosaurs. Theropod skull diversity10,11, like that of dinosaurs as a whole8, is very high. A general understanding on the relationship between modular and functional patterns of amniote skulls is needed to understand the morphofunctional diversity of those groups.

Among fully terrestrial vertebrates (amniotes), a great diversity of skull types exists12. For example, the temporal skull region behind the eye can be closed, can have one or, like in tyrannosaurs, two openings, or can display marginal reductions between bones. In addition, the snout, braincase, and palatal region experienced great modifications through evolution related to behavioral (e.g., neurobiological) and ecological (e.g., feeding, fossorial) adaptations13.

Here we present the first study of the cranial complexity and modularity of T. rex in comparison with a sample representing all the major clades of extant amniotes (lepidosaurs, turtles, crocodylians, birds, and mammals) using Anatomical Network Analysis (AnNA)14,15. This methodology allows us to detect deeper anatomical aspects that cannot be examined otherwise and can provide crucial information about potential functional entities. AnNA complements the more traditional approach to morphological integration and modularity using morphometrics, which focuses on co-variations in size and shape16. Specifically, AnNA uses algorithms from network theory to quantify and compare the anatomy of organisms14,15. This approach starts with the modeling of anatomical structures as networks, in which nodes represent anatomical parts (e.g., bones) and links represent their physical connections (e.g., articulations).

We hypothesized that life performance of the tyrannosaur skull can be deduced from patterns of bone integration in extant amniote skulls, for which functional morphology is better understood than in any fossil. To better understand the skull of T. rex, here we provide a function-related discussion of modularity in an evolutionary context17. As representatives of the major extant amniote clades, we studied skull networks of the Virginian opossum, tuatara, leatherback turtle, alligator, and the chicken, which in our sampling represents the closest relative of tyrannosaurs (Fig. 1A).

Figure 1
Figure 1

Phylogenetic arrangement of taxa analyzed in this study. Phylogenetic framework and divergence times correspond to Shedlock and Edwards75 for extant taxa and Benton76 for Tyrannosaurus rex (A). Values of network parameters and results of the modularity analysis for every skull network in the sample (B). Phylograms of network-parameters (CH). Abbreviations within the subfigures: N, nodes, number of skeletal elements; L, links, number of contacts among skeletal elements (i.e., physical joints); (D) density of connections, actual number of links divided by the maximum number possible; (C) mean clustering coefficient, average of the ratio of a node’s neighbors that connect among them; L, mean shortest path length, average number of links required to travel between two nodes; H, heterogeneity of connections, standard deviation divided mean of the number of connections of every node; S, number of S-modules, modules identified using statistical significance; Q, number of Q-modules, modules identified using optimization function Q; Qmax, maximum value of Q calculated for the best partition of the dendrogram; Qmax error, expected error of Qmax. Time in million years.

Results

Network parameters describing skull anatomy

Tyrannosaurus rex and chicken have the skulls and lower jaws with the highest and lowest number of bones of the sample (N = 63 and 34, respectively) (Fig. 1B). The number of bones in the chicken is close to that of the opossum (N = 35), whereas tyrannosaur is closer to the other diapsids: tuatara (N = 58) and alligator (N = 53) (Fig. 1C). The leatherback turtle takes intermediate values (N = 46). The same pattern observed for nodes is visible for the number of links (connections between bones: K) (Fig. 1D).

When considering the density of connections (D), tyrannosaur (D = 0.095) falls close to chicken and other sauropsids (i.e., reptiles), as is expected by its phylogenetic position (Fig. 1A,E). The parameter D has been interpreted in past works as a proxy of morphological complexity, with a higher value of D meaning a greater complexity of the skull18. In this regard, the chicken skull is as complex as that of other sauropsids, while the opossum (D = 0.139) has the skull with the greatest morphological complexity of all.

The chicken shows a relatively low mean clustering coefficient (C = 0.304) that sets it apart from the other taxa of the sample, with about 10% less C than others. Tyrannosaur (C = 0.438), however, falls close to the leatherback turtle (C = 0.444) (Fig. 1B,F). C has been interpreted in the past as a proxy of anatomical integration, with higher values of C meaning greater integration18. In this context, integration refers to the degree of inter-connectivity among the parts of the skull; having a greater integration is related to stronger constraints or co-dependences, such as those affecting co-evolution or co-variation of skull regions15. This means that chickens have evolved a less integrated skull anatomy.

All taxa except the opossum show a similarly large mean shortest path length (L), although opossum has a relatively small value (L = 2.066) (Fig. 1G). The shortest path length is a network parameter or topological variable. It measures the minimum amount of connections separating two nodes (e.g., two connected nodes have an L = 1; if they are not directly connected, L will be >1; thus, the higher their L the more separated they are). L has been interpreted in the past as proxy of integration, with smaller values of L meaning greater integration18. In this context, the chicken skull (L = 3.371) is less integrated than those of reptiles, while the opossum skull is the least integrated of all. The tyrannosaur (L = 3.431) falls together with all other sauropsids, clearly deviating from the opossum. As stated above, overall skull integration at a topology has been suggested to affect other aspects of phenotypic organization and variation19.

Regarding heterogeneity of connections, the chicken (H = 0.493) shows intermediate values between the other sauropsids and the opossum (Fig. 1B,H). H has been interpreted as a proxy of anisomerism (i.e., irregularity, differentiation, or specialization) with higher H meaning greater anisomerism18. In this context, chicken skull bones have a degree of differentiation (in terms of connectivity) between other sauropsids (low) and the opossum (high), with tyrannosaur (H = 0.345) falling together with the chicken and the other reptiles, with values similar to that of tuatara (H = 0.323), which would suggest a phylogenetic linkage.

Modularity

The tyrannosaur shows a more modular skull and has, in terms of network theory, a less consistent pattern (Q-modules = 7, Qmax = 0.551, Qmax.error = 0.035) than any other amniote studied here (Q-modules = 5 or 6; Figs 13). An internal separation of the left anterior skull side exists (red module in figures, p = 0.001; Figs 2A and 4A) consisting of upper jaw and anterior palatal bones in its lower part (pink module) and anterior skull roof and circumorbital bones in its upper part (purple module, p = 0.001). Posterior skull roof bones (green module) and braincase bones (yellow module) form modular patterns on each side. The sphenoids and the ethmoid form a close association (blue module). A close relation of bones situated in the lower part of the adductor chamber (orange module), including quadrate, palatoquadrate, pterygoid, and epipterygoid, exists on each side. In contrast to all other amniotes studied, the detailed composition of bones in the modules of the tyrannosaur skull is very inconsistent on each side and the association of modules differs as well. This means that modules are largely independent from each other and internal integrity is not as consistent/stable in a topological sense.

Figure 2
Figure 2

Dendrograms showing the hierarchical clustering of nodes for each anatomical network in tyrannosaur (A), chicken (B), and alligator (C). Anatomical regions (modules/submodules) are labeled on the branches. The horizontal red dashed line marks the best partition into Q-modules. Cluster with a circle are all S-modules; filled circles in clusters mark the statistical significance of this potential module (white, p-value < 0.05; grey, p-value < 0.01; black, p-value < 0.001).

Figure 3
Figure 3

Dendrograms showing the hierarchical clustering of nodes for each anatomical network in leatherback turtle (A), tuatara (B), and opossum (C). Anatomical regions (modules/submodules) are labeled on the branches. The horizontal red dashed line marks the best partition into Q-modules. Cluster with a circle are all S-modules; filled circles in clusters mark the statistical significance of this potential module (white, p-value < 0.05; grey, p-value < 0.01; black, p-value < 0.001).

Figure 4
Figure 4

Drawings of skulls with modules shown in different colors corresponding to Fig. 2A and B, respectively. (A) Tyrannosaur Tyrannosaurus rex, (B) chicken Gallus gallus. Abbreviations for Figs 46: ang, angular; art, articular; b, beak; ba, basioccipital; br, braincase; bs, basisphenoid; cor, coronoid; den, dentary; ec, ectopterygoid; epi, epipterygoid; et, ethmoid; fr, frontal; ju, jugal; la, lacrimal; mx, maxilla; na, nasal; oc, occipital; op, opisthotic; pa, parietal; pb, palpebral; pal, palatine; pbs, parabasisphenoid; pe, petromastoid; pfr, prefrontal; pmx, premaxilla, po, postorbital; pofr, postfrontal; pra, prearticular; pro, prootic; psph, parasphenoid; pt, pterygoid; qj, quadratojugal; qu, quadrate; sa, supraangular; smx, septomaxilla; so, supraoccipital; sp, splenial; sph, sphenoid; sur, surangular; vo, vomer; zy, zygomatic. For drawings without coloration, see Supplementary Figures.

In the chicken, the palate and beak form one single module (pink in Fig. 2B), the left and the right zygomatic arch form distinct modules (red), and all other bones, surrounding and including the braincase, form the other module (yellow) (Figs 2B and 4B).

In alligator, the left and right snout parts are split into two separate modules (red in figures, p = 0.05). Anteriorly, the snout tip forms a separate module (light red) (Figs 2C and 5A), like in the opossum (Figs 3C and 6B), being limited posteriorly by canine-like large teeth from the lower jaw, and bearing the nose opening dorsally (Fig. 5A). Similar to tuatara (Figs 3B and 6A), the temporal bones of alligator form a module (orange) within a higher integration of other skull elements on each side. The pterygoid is part of the module that comprises the large snout related bones (red). The small braincase (yellow) is loosely integrated to the temporal and the skull roof region.

Figure 5
Figure 5

Drawings of skulls with modules shown in different colors corresponding to Figs 2C and 3A, respectively. (A) Alligator Alligator mississipiensis, (B) leatherback turtle Dermochelys coriacea. For abbreviations, see caption of Fig. 4. For drawings without coloration, see Supplementary Figures.

Figure 6
Figure 6

Drawings of skulls with modules shown in different colors corresponding to Fig. 3B,C, respectively. (A) Tuatara Sphenodon punctatus, (B) opossum Didelphis virginiana. For abbreviations, see caption of Fig. 4. For drawings without coloration, see Supplementary Figures.

The leatherback turtle shows a separation in a bilateral snout module (red in figures), a left and a right module (p = 0.01) combining the skull roof (green) and the cheek bones (orange), and a module composed of braincase and associated elements (yellow) (Figs 3A and 5B).

The tutatara has a clear modular pattern distinguished into left and right sides of the skull (Figs 3B and 6A). Temporal bones (orange in figures), skull roof bones (green), and braincase bones (yellow) are modular entities in tuatara, nested within each skull side, although they do not show a clearly positioned integration to each other.

The opossum shows one module made of snout bones from both body sides (red in figures) (p = 0.01), including palatal and upper jaw elements (Figs 3C and 6B). The posterior part of the skull with the braincase and associated bones, such as the squamosals and parietals, form the second module (yellow). The tip of the snout, as a third module (light red), is made of the nasals and premaxillas. The ear ossicles form completely separated modules on each side (white, p = 0.01), because they are not connected to other bones.

In addition to the above-mentioned modules of the skull, each sauropsid has two separated lower jaw modules with species-specific integration of the particular bones (grey in figures). Except for the beak-bearing chicken, the articular, which articulates with the quadrate, is less integrated to the other lower jaw elements. Importantly, in the opossum both mandibles (dentaries) form a single module (grey), providing a further example of a phylogenetic pattern (i.e., contralateral bone fusion in mammals) revealed by AnNA. The tyrannosaur does not show a particularly different modular system although a large fenestra is present on the mesial side of its lower jaw.

Discussion

The tyrannosaur has the most complex and least consistent modular pattern among the sample representatives of each major extant amniote clade. In terms of its topology, the tyranosaur skull is clearly peculiar, displaying a high number of modular subdivisions. Single bones are not necessarily fixed to a particular module. Moreover, modules are largely independent from each other on each body side. These important findings suggest a highly flexible skull, in terms of functional morphology. We detected diverse modular patterns for all amniotes studied here. These patterns are highly specific for each taxon and are likely related to specific functional demands, because despite some clear cases of phylogenetic patterns that were revealed by AnNA, only little phylogenetic correlation was detected (Fig. 1B). The comparative discussion of skull modularity among amniotes, highlighting common and diverging patterns, permits us to provide here a refined morphofunctional characterization of the tyrannosaur, a taxon deeply nested within amniote phylogeny (Fig. 1A).

Bone reduction

The number of bones in the tyrannosaur is similar to that of all other sauropsids except for the chicken. Through fusion processes during ontogeny, this relatively close relative of the tyrannosaur shows great reduction of ossification centers20 and, convergent to opossum, accordingly shows great bone reduction (low N- and K-values). The complexity of the chicken skull (estimated by D) is, however, similar to that of other sauropsids illustrating that bone connections were established differently when compared to opossum. This observation is further supported by the low integration (as estimated by C and L) in chicken, showing that bone contacts arranged in a different, less compact way when compared to those of the opossum. In the latter taxon, inter-connections among close bones produced a very compact skull (high D and C, low L) and although heterogeneity (H-value) is higher in the chicken when compared to other sauropsids, it is still far from that achieved in opossum. The higher compactness in opossum, however, does not necessarily imply less modularity – which is similar in chicken and opossum (i.e., number of Q-modules, Fig. 1B) – meaning that individual bone size and anatomical differentiation are, of course, also important to establish modular patterns in the skull.

Kinetic and akinetic forms

Kinesis of the skull not only refers to mobile joints between bones, but cranial kinesis can also be developed in skulls with immobile sutures by having relatively thin and elastic bones in gracile crania that eventually enable the same range of motion21. Cranial kinesis of tuatara is highly disputed. Although a single cineradiography experiment failed to demonstrate (joint based) cranial kinesis22, anatomical conditions such as the presence of constrictor dorsalis musculature, indicate that at least some degrees of skull kinesis are actually present in this species23,24,25. Kinesis appears to be largely reduced in adult tuatara by strong sutures between bones, although the gracile architecture of the skull is generally compatible with elasticity-related cranial kinesis, particularly in juveniles, which have a different feeding behavior compared to adults25. Given the lightweight design of the tuatara skull26, we define it as kinetic herein. Also dinosaurs do not have well-developed intracranial joints when compared to many lizards or birds; however, little is known about actual intracranial mobility in their comparably gracile skulls23.

In this regard, we found a clear distinction between species with a suspected skull kinesis (i.e., tyrannosaur, chicken, tuatara) and species with fully akinetic skulls (i.e., alligator, leatherback turtle, opossum). Akinetic species, have to withstand extremely strong biting forces27,28,29. As a result, they have fewer bones (N ≤ 53) than tyrannosaur and tuatara and relatively high network density, meaning they have to build broader sutures (e.g., in contrast to tuatara) to each other to keep integrity. Suspected kinetic species have more bones (N ≥ 58) and, in average, a lower network density (Fig. 1), meaning that, overall, smaller sutures might enable high mobility in the articulations and/or bones are more flexible/elastic than in akinetic species. Among kinetic species, however, the tyrannosaur has the greatest density, a bit larger than the akinetic alligator, which appears to relate to its supposedly hypercarnivor behavior and powerful food processing. The chicken skull is an exception in this regard, because it has fewer bones (N = 34) but, as mentioned above, its network density is relatively high. This is because its braincase bones are highly fused to support the brain30,31; the remainder of the skull, including palate, break, and skull roof, consists of very fragile and highly kinetic elements32. Overall skull network construction is highly diverse, and has little affinity to phylogenetic relationship as noted above. Even if the turtle and archosaurs (tyrannosaur, chicken, alligator) are relatively closely related33, the physical joints differ in number and position. The akinetic skulls obviously evolved independent from each other in these lineages.

Individual skull modularity

Patterns of modularity show a clear correspondence to skull architecture in each species. We first discuss the modularity of opossum, as the mammalian outgroup, and then continue along the tree (Fig. 1A) with tuatara, leatherback turtle, alligator, and finally chicken as the taxon more closely related to the tyrannosaur. By doing this comparison, we hope to contribute to a better understanding of the evolutionary history of tyrannosaur skull complexity and modularity.

The integration of left and right body side elements in individual bilateral modules nicely illustrates the compact nature of the akinetic mammal skull, as seen in the example of opossum (Figs 3C and 6B). In mammals such as the opossum food processing occurs in the middle of the snout module. The snout includes the zygomatic bone (Fig. 6B), from which the chewing muscle, the masseter, mainly originates. The main bite forces appear in the posterior part of the skull, from which the jaw closing muscle, the temporalis, originates34. Associated to that, the sphenoid, which braces the lateral braincase35, is part of the posterior skull module (Figs 3C and 6B). The separate module at the snout tip corresponds to the macrosmathic nature of most mammalian skulls. The canines, which have to resist much biting force36, are situated posterior to this module.

Tuatara shows a very independent nature of its modules in the global context of the gracile skull, the architecture of which is made of several bony bars, loosely embracing the modules. The skull of tuatara is principally constructed as kinetic (see above) and the certain independency of modules (Figs 3C and 6B) might enable a better flexibility when processing food37. For that, highly differentiated jaw adductor musculature of lepidosaurs allows for handling agile prey23,38,39. The epipterygoid (Fig. 6B), which supposedly moves the palatal shelve in lizards, is a part of the braincase module in tuatara, which also highlights the diverse labor division in the adductor chamber.

The snout of turtles is very broad and left and right sides are strongly fused, likely as an adaptation of the akinetic skull. Early in turtle evolution, the skull was still kinetic as indicated by a pterygoid-braincase articulation. In extant turtles, without such articulation, the pterygoid (Figs 2C and 5B) is an integrated part of the braincase module40,41,42. In addition, the braincase is broadly fused with the quadrate in crown turtles making cranial mobility impossible41,43,44. In crown turtles, development of the akinetic skull is completed by the formation of a secondary lateral braincase wall, mainly made of a descending process of the parietal45. As such, the skull roof - present as a submodule in the leatherback turtle - also covers the brain laterally. The cheek submodule is composed of jugal, quadratojugal, and squamosal (Figs 3A and 5B) bones to which the superficial external adductor musculature attaches46,47,48,49.

The alligator also has an akinetic skull. However, it has evolved a different modular pattern of skull bones compared to the opossum and leatherback turtle, and a unique mode of skull fixation took place50. Like in opossum, the snout tip is not as much involved in bite force distribution as the rest of the snout19, making it a separate module (Figs 2C and 5A). Apparently, the double-fenestrated temporal region in the alligator resulted in a separate temporal module such as in tuatara. In both species, the external jaw musculature attaches to the temporal region in a complex manner51. In alligator, however, most biting force is transmitted via pterygoid-related internal jaw musculature making the pterygoid a part of the snout module52,53.

The specific avian adaptation of having both large eyes and beaks is clearly mirrored in the detected modularity (Figs 2B and 4B). The posterior part of the skull forms a dense capsule of bones31. The kinetics are highly derived when compared to the ancestral diapsid condition (with two temporal openings), which is still partly preserved in tuatara37, and the beak is moveable against the skull roof (prokinesis) thanks to the lever of the zygomatic arch32.

Tyrannosaur skull performance

The highly complex modularity detected for the tyrannosaur (Figs 2A and 4A) indicates a very flexible skull regarding bite force distribution. Although loosely associated to others, the best-resolved modular associations are established by the lateral sides of the skull. The comparison to other amniotes and biological considerations result in the following assumptions.

  1. 1.

    Like all supposedly or clear kinetic forms studied herein (tuatara, chicken), a high degree of cranial mobility is possible in the tyrannosaur when compared to clear akinetic forms. This is consistent with the flexible sutures11 and the great number of links in the network of its cranial bones. This flexibility should be taken into account when reconstructing cranial performance54. Like in alligator, a large snout is formed; however, different to alligator, streptostylic movement (via the epipterygoid, which connects the laterosphenoid and the quadrate process of the pterygoid) might have existed in the tyrannosaur. Although quite robust8, the epipterygoid might have enabled some independent movements of the snout against the rest of the skull, like in tuatara, and an internal mobility between the upper and lower snout regions might have been beneficial in prey processing.

  2. 2.

    Internal snout mobility is supported by the formation of large fenestrations in the snout, which are mainly thought to enable pneumaticity, reduction of skull weight, and to buffer bite forces6,9, but also reduces the contact area between bones and as such triggers higher mobility between them. The modular separation of the snout in upper and lower parts, related to snout fenestrations, not necessarily mirrors bite force distribution. It was reconstructed to travel from the canine-like teeth upwards when puncturing prey6,10, a pattern also found in mammals, which do not have such a facial fenestration55. The tyrannosaur was hypothesized to have not only punctured but also pulled its food6,10,54. Associated to the presence of thecodont teeth, nesting in jaw alveoles, strain travels mainly along the upper jaw via the maxillar-jugal contact6 in the lower part of the snout module. Pulling food, as such, might have had a major influence in separating a lower and an upper snout submodule. In this context it is worth noting that, in contrary to the opossum, although specialized teeth are present on the premaxillary, no snout tip module was formed. Finite element analyses might be able to confirm this refined hypothesis for tyrannosaur when considering suture anatomy [sensu56].

  3. 3.

    Although having a typical diapsid skull (like tuatara and alligator), a separation of a temporal bone module does not exist in tyrannosaur. This indicates that bite force might have been concentrated on a different aspect of the skull, namely the lower part of the adductor chamber, to which the muscles adductor mandibulae posterior and pseudotemporalis insert57,58,59. The lower adductor chamber represents a separate module in our analysis. Voluminous jaw muscles have also been reconstructed for the upper part of the adductor chamber. However, within particular muscles, the distribution of different muscle fiber types60,61 and different fiber orientation62, which generate specific force distributions, were not yet considered in any finite element analysis. Moreover, reconstructing fiber distribution in extinct species would be extremely time consuming. As such, AnNA, as presented here, in combination with biomechanic analysis is crucial to provide a first approximation to a more reasonable reconstruction of feeding biology in tyrannosaurs - and other fossil vertebrates.

Conclusions

In summary, the results of this study highlight how the use of AnNA can offer a new perspective on long-standing anatomical problems and help to better understand the evolvability of amniote skulls and their adaptations to different feeding behaviors. “Hidden” kinetics, not obvious due to the absence of movable joints but enabled by elastic bone and gracile skull constructions permit better estimation of skull performances. Using the extant bracketing approach and broad scale phylogenetic comparison helps understanding functional constraints and possibilities in extinct species for which no direct data on life performances are available. Our results show a relatively low correlation between the network skull integration and modularity with phylogenetic relationships, which suggest that the patterns of integration and modularity revealed in the present work are more likely related to ecological factors, such as the mode of food processing. In all species, however, a trade-off exists between phylogenetic and general functional constraints, such as lowering skull weight in tyrannosaur or brain encapsulation in birds on the one hand, and feeding adaptations on the other hand. Future studies may concentrate on modular patterns on lower taxonomic levels, for example, comparing different non-avian theropod or bird species to test the general conclusions of our work and to specify functional integrity of specific skull regions. Moreover, studies relating muscle and bone integration will help detailing the functional derivations hypothesized herein. We believe this founding study will pave the way for more comprehensive analyses of reptile evolution in particular and of anatomical evolution in general, and for the further use of AnNA to tackle morphological complexity, integration, and modularity in evolution.

Methods

Taxonomic sampling

We selected a sample of species from all major amniote groups for the analysis, including the opossum Didelphis virginiana63 (Mammalia), the tuatara Sphenodon puctatus25,38,64 (Lepidosauria), the leatherback turtle Dermochelys coriacea65 (Testudines), the alligator Alligator mississippiensis66,67 (Crocodylia), the chicken Gallus gallus20,30 (Aves), and the tyrannosaur Tyrannosaurus rex68,69,70 (Tyrannosauridae).

For D. virginiana, the sphenoid was coded as a single bone because its subparts (e.g., the alisphenoid) are not completely separated (by sutures) bones in the adult (for a recent review, see63]. D. coriacea is a representative of cryptodire turtles with a fully formed dermal armor above the adductor chamber. In this regard, it resembles the morphotype of stem turtles such as Proganochelys quenstedt40. However, it must be noted that skull diversity is enormous among turtles and marine turtles such as D. coriacea show a secondary formation of a full temporal armor12. Development and fusion of ossification centers is well traceable in G. gallus20. In the adult condition (coded herein), however, the braincase shows comprehensive fusion.

Anatomical network analysis

We built unweighted, undirected network models of the skull anatomy of the six amniote taxa. Anatomical networks were coded as adjacency matrices in Excel sheets, with each contact between two nodes coded as “1” and the absence of contact between those nodes coded as “0”. In defining nodes and links, we did not include cartilaginous elements because this information is not known for fossils and/or homology of cartilaginous elements is not fully resolved in most taxa. Data were analyzed with R71 using the package igraph72. For every network, parameters were measured using functions implemented in the package igraph (see below and Supplementary information).

Identification of network modules

We delimited the modules of the anatomical networks using a hierarchical clustering of the generalized topological overlap similarity matrix among nodes (GTOM)14,73. The heuristic of GTOM is that nodes that connect to the same other nodes (i.e., share neighbors) have a higher chance of belonging to the same module. Topological overlap between two nodes is defined by the number of common neighbors between them as, \(T{O}_{i,j}=J({n}_{i},{n}_{j})/\mathop{\min }\limits_{k}({k}_{i},{k}_{j})\), where J(ni, nj) is the number of neighbors in common between nodes i and j. TO is 1 when the two nodes share all their neighbors, that is, they connect to exactly the same other nodes. TO is 0 when the two nodes have no neighbor in common. Using the values of TO as a distance or dissimilarity matrix, we then group nodes into clusters using an agglomerative hierarchical cluster analysis (do not confuse this with the parameter clustering coefficient). The output is a hierarchical grouping of nodes as in a dendrogram.

To identify the modules of the network we needed to cut the dendrogram at an appropriate height. To make this decision we used the optimization function modularity Q defined by Clauset et al.74, which is commonly used to assess whether the best partition identified by a community detection algorithm is better that what is expected at random. For each possible partition of the dendrogram we measured Q, the best partition is the one having the highest Q or Qmax (dashed red lines in Figs 2 and 3). Thus, quality of the identified partitions is given by its Q value: Q will be close to 0, if the number of links within modules is no better than that expected at random; Q will be closer to 1 if the modules identified deviate from what is expected for a random network. According to Clauset et al.’s74 observations, usual values of strongly modular networks range between 0.3 and 0.7. The expected error of Q was calculated using a jackknife procedure, where every link is an independent observation. Modules identified using the cutting of the dendrogram at Qmax were called Q-modules.

We also calculated the statistical significance of every cluster of the dendrogram. This was done by performing a two-sample Wilcoxon rank-sum test on the internal vs. external connections of every module. According to the general definition of a module as a group of nodes highly connected among themselves and poorly connected to nodes in other groups, we expect internal connections to be significantly higher than external connections (H0: Kinternal = Kexternal; HA: Kinternal > Kexternal). Lower p-values tell us to reject H0, and hence we can assume the alternative hypothesis, that the nodes of the module are more connected among themselves than to other nodes outside the module, is supported. In other words, the module identified is not expected by a random grouping of nodes. Figures 2 and 3 show the statistical significance of each cluster using colored circles (no-circle, p-value ≥ 0.5, white, p-value < 0.05; grey, p-value < 0.01; black, p-value < 0.001). Modules identified using the p-value of the two-sample Wilcoxon rank-sum test were called S-modules. For a meaningful biological interpretation, a balanced discussion between Q- and S-modules is necessary.

Availability of Data and Material

Four online supplementary files are associated to this paper.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

References

  1. 1.

    Bakker, R. T. Speed in tyrannosaurs. Journal of Vertebrate Paleontology 22, 34A (2002).

  2. 2.

    Biewener, A. A. Walking with tyrannosaurs. Nature 415, 971–972 (2002).

  3. 3.

    Samman, T. Tyrannosaurid Craniocervical Mobility: A Preliminary Assessment. In Tyrannosaurid Paleobiology (eds Parrish, J. M., Molnar, R. E., Currie, P. J. & Koppelhus, E. B.) 195–210 (2013).

  4. 4.

    Snively, E. & Russell, A. P. Craniocervical feeding dynamics of Tyrannosaurus rex. Paleobiology 33, 610–638, https://doi.org/10.1666/06059.1 (2007).

  5. 5.

    Snively, E. & Russell, A. P. Functional variation of neck muscles and their relation to feeding style in Tyrannosauridae and other large theropod dinosaurs. The Anatomical Record: Advances in Integrative Anatomy and Evolutionary Biology 290, 934–957, https://doi.org/10.1002/ar.20563 (2007).

  6. 6.

    Rayfield, E. J. Cranial mechanics and feeding in Tyrannosaurus rex. Proceedings of the Royal Society of London, Series B 271, 1451–1459 (2004).

  7. 7.

    Gignac, P. M. & Erickson, G. M. The biomechanics behind extreme osteophagy in Tyrannosaurus rex. Scientific Reports 7, https://doi.org/10.1038/s41598-017-02161-w (2017).

  8. 8.

    Weishampel, D. B., Dodson, P. & Osmólska, H. The Dinosauria. 2 edn, (University of California Press 2004).

  9. 9.

    Witmer, L. M. The evolution of the antorbital cavity of archosaurs: A study in soft-tissue reconstruction in the fossil record with an analysis of the function of pneumaticity. Journal of Vertebrate Paleontology 17, 1–73 (1997).

  10. 10.

    Rayfield, E. J. Aspects of comparative cranial mechanics in the theropod dinosaurs Coelophysis, Allosaurus and Tyrannosaurus. Zoological Journal of the Linnean Society 144, 309–316 (2005).

  11. 11.

    Rayfield, E. J. Using finite-element analysis to investigate suture morphology: a case study using large carnivorous dinosaurs. The anatomical record. Part A, Discoveries in molecular, cellular, and evolutionary biology 283, 349–365 (2005).

  12. 12.

    Werneburg, I. Temporal bone arrangements in turtles: an overview. Journal of Experimental Zoology. Part B: Molecular and Developmental Evolution. 318, 235–249 (2012).

  13. 13.

    Lakjer, T. Studien über die Gaumenregion bei Sauriern im Vergleich mit Anamniern und primitiven Sauropsiden. Zoologische Jahrbücher 49, 57–356 (1927).

  14. 14.

    Esteve-Altava, B. Challenges in identifying and interpreting organizational modules in morphology. Journal of Morphology 278, 960–974, https://doi.org/10.1002/jmor.20690 (2017).

  15. 15.

    Rasskin-Gutman, D. & Esteve-Altava, B. Connecting the dots: anatomical network analysis in morphological Evo Devo. Biological Theory 9, 178–193 (2014).

  16. 16.

    Esteve-Altava, B. In search of morphological modules: A systematic review. Biological Reviews 92, 1332–1347, https://doi.org/10.1111/brv.12284 (2017).

  17. 17.

    Witmer, L. M. The extant phylogenetic bracket and the importance of reconstructing soft tissues in fossils. In Functional Morphology in Vertebrate Paleontology (ed. Thomason, J.) Ch. 2, 19–33 (University Press 1995).

  18. 18.

    Esteve-Altava, B., Marugan-Lobon, J., Botella, H. & Rasskin-Gutman, D. Structural constraints in the evolution of the tetrapod skull complexity: Williston’s Law revisited using network models. Evolutionary Biology 40, 209–219, https://doi.org/10.1007/s11692-012-9200-9 (2013).

  19. 19.

    Sellers, K. C., Middleton, K. M., Davis, J. L. & Holliday, C. M. Ontogeny of bite force in a validated biomechanical model of the American alligator. Journal of Experimental Biology 220, 2036–2046, https://doi.org/10.1242/jeb.156281 (2017).

  20. 20.

    Jollie, M. T. The head skeleton of the chicken and remarks on the anatomy of this region in other birds. Journal of Morphology 100, 389–436 (1957).

  21. 21.

    Natchev, N., Handschuh, Lukanov, S., Tzankov, N., Naumov, B. & Werneburg, I. Contributions to the functional morphology of caudate skulls: Kinetic and akinetic forms. PeerJ 5, 1–15 (2016).

  22. 22.

    Metzger, K. Cranial kinesis in lepidosaurs: skulls in motion. In Topics in Functional and Ecological Vertebrate Morphology (eds Aerts, P., D’Août, K., Herrel, A. & Van Damme, R.) 15–46 (Shaker Publishing 2002).

  23. 23.

    Holliday, C. M. & Witmer, L. M. Cranial kinesis in dinosaurs: Intracranial joints, protractor muscles, and their significance for cranial evolution and function in diapsids. Journal of Vertebrate Paleontology 28, 1073–1088 (2008).

  24. 24.

    Ostrom, J. H. On the constrictor dorsalis muscles of Sphenodon. Copeia 1962, 732–735 (1962).

  25. 25.

    Jones, M. E. H., Curtis, N., Fagan, M. J., O’Higgins, P. & Evans, S. E. Hard tissue anatomy of the cranial joints in Sphenodon (Rhynchocephalia): Sutures, kinesis, and skull mechanics. Palaeontologia Electronica 14, 92p (2011).

  26. 26.

    Curtis, N. et al. Predicting muscle activation patterns from motion and anatomy: modelling the skull of Sphenodon (Diapsida: Rhynchocephalia). Journal of the Royal Society, Interface/the Royal Society 7, 153–160 (2010).

  27. 27.

    Schwenk, K. Feeding: Form, Function and Evolution in Tetrapod Vertebrates (Academic Press, San Diego 2000).

  28. 28.

    Novacek, M. J. Patterns of Diversity in the Mammalian Skull. In The Skull, Volume 2: Patterns of Structural and Systematic Diversity (eds Hanken, J. & Hall, B. K.) 438–545 (University of Chicago Press 1993).

  29. 29.

    Herring, S. W. Functional anatomy of mammalian mastication. American Zoologist 33, 289–299 (1993).

  30. 30.

    Bittner, F. Über die Schläfenregion am Schädel der Vögel und dessen Beziehungen zu dem der Reptilien. Archiv für Naturgeschichte 78, 1–23, Tafel I (1912).

  31. 31.

    Zusi, R. L. Patterns of Diversity in the Avian Skull. In The Skull, Volume 2: Patterns of Structural and Systematic Diversity [580p.] (eds Hanken, J. & Hall, B. K.) Ch. 8, 391–437 (University of Chicago Press 1993).

  32. 32.

    Bock, W. J. Kinetics of the avian skull. Journal of Morphology 114, 1–42 (1964).

  33. 33.

    Rieppel, O. The Relationships of Turtles within Amniotes. In Biology of Turtles (eds Wyneken, J., Godfrey, M. H. & Bels, V.) Ch. 13, 345–353 (CRC Press 2008).

  34. 34.

    Lautenschlager, S., Gill, P., Luo, Z.-X., Fagan, M. J. & Rayfield, E. J. Morphological evolution of the mammalian jaw adductor complex. Biological Reviews 92, 1910–1940 (2017).

  35. 35.

    Maier, W. The ontogenetic development of the orbitotemporal region in the skull of Monodelphis domestica (Didelphidae, Marsupialia), and the problem of the mammalian alisphenoid. In Morphogenesis of the mammalian skull. Mammalia depicta - Beihefte zur Zeitschrift für Säugetierkunde (eds Kuhn H. J., Zeller, U. & Röhrs, M.) (Verlag Paul Parey 1987).

  36. 36.

    Wroe, S., Clausen, P., McHenry, C., Moreno, K. & Cunningham, E. Computer simulation of feeding behavior in the thylacine and dingo as a novel test for convergence and niche overlap. Proceedings. Biological sciences/The Royal Society 274, 2819–2828 (2007).

  37. 37.

    Curtis, N. et al. Functional relationship between skull form and feeding mechanics in Sphenodon, and implications for diapsid skull development. Plos One 6, e29804 (2011).

  38. 38.

    Evans, S. E. The Skull of the Lepidosauria. In Biology of the Reptilia (eds Gans, C., Gaunt, A. S. & Adler, A.) Ch. 1, 1–347 (Society for the Study of Amphibians and Reptiles 2008).

  39. 39.

    Iordansky, N. N. Cranial kinesis in lizards (Lacertilia): Origin, biomechanics, and evolution. Biological Bulletin 38, 852–861 (2011).

  40. 40.

    Gaffney, E. S. The comparative osteology of the Triassic turtle Proganochelys. Bulletin of the American Museum of Natural History 194, 1–263 (1990).

  41. 41.

    Werneburg, I. & Maier, W. Considerations on the development of the akinetic skull in pleurodire and cryptodire turtles. In Turtle Evolution Symposium. Program & Abstracts (eds Hirayama, R. et al.) 86–87 (Scidinge Hall Tübingen 2018).

  42. 42.

    Rabi, M., Zhou, C.-F., Wings, O., Ge, S. & Joyce, W. G. A new xinjiangchelyid turtle from the Middle Jurassic of Xinjiang, China and the evolution of the basipterygoid process in Mesozoic turtles. BMC Evolutionary Biology 13, 1–28 (2013).

  43. 43.

    Joyce, W. G. Phylogenetic relationships of Mesozoic turtles. Bulletin of the Peabody Museum of Natural History 48, 3–102 (2007).

  44. 44.

    Gaffney, E. S. Comparative cranial morphology of recent and fossil turtles. Bulletin of the American Museum of Natural History 164, 67–376 (1979a).

  45. 45.

    Eßwein, S. E. Zur phylogenetischen und ontogenetischen Entwicklung des akinetischen Craniums der Schildkröten. Natürliche Konstruktionen - Mitteilungen des SFB 230(7), 51–55 (1992).

  46. 46.

    Schumacher, G. H. Die Kopf- und Halsregion der Lederschildkröte Dermochelys coriacea (LINNAEUS 1766) - Anatomische Untersuchungen im Vergleich zu anderen rezenten Schildkröten (Akademie-Verlag 1972).

  47. 47.

    Werneburg, I. The cranial musculature in turtles. Palaeontologia Electronica 14, 15a: 99 pages (2011).

  48. 48.

    Werneburg, I. Jaw musculature during the dawn of turtle evolution. Organisms, Diversity & Evolution 13, 225–254 (2013b).

  49. 49.

    Ferreira, G. S. & Werneburg, I. Evolution, Diversity, and Development of the Craniocervical System in Turtles with Special Reference to Jaw Musculature. In Heads, Jaws and Muscles - Anatomical, Functional and Developmental Diversity in Chordate Evolution Fascinating Life Science (eds Ziermann, J. M., Diaz, R. E. & Diogo, R.) (Springer, in press).

  50. 50.

    Klembara, J. Ontogeny of the partial secondary wall of the otoccipital region of the endocranium in prehatching Alligator mississippiensis (Archosauria, Crocodylia). Journal of Morphology 266, 319–330, https://doi.org/10.1002/Jmor.10380 (2005).

  51. 51.

    Holliday, C. M. & Witmer, L. M. Archosaur adductor chamber evolution: Integration of musculoskeletal and topological criteria in jaw muscle homology. Journal of Morphology 268, 457–484, https://doi.org/10.1002/Jmor.10524 (2007).

  52. 52.

    Witzmann, F. & Werneburg, I. The palatal interpterygoid vacuities of temnospondyls and the implications for the associated eye- and jaw musculature. Anatomical Record 300, 1240–1269 (2017).

  53. 53.

    Lautenschlager, S., Witzmann, F. & Werneburg, I. Palate anatomy and morphofunctional aspects of interpterygoid vacuities in temnospondyl cranial evolution. Naturwissenschaften 103, 1–10 (2016).

  54. 54.

    Lautenschlager, S. Estimating cranial musculoskeletal constraints in theropod dinosaurs. Royal Society Open Science 2, https://doi.org/10.1098/rsos.150495 (2015).

  55. 55.

    Wroe, S. Cranial mechanics compared in extinct marsupial and extant African lions using a finite-element approach. Journal of Zoology 274, 332–339 (2008).

  56. 56.

    Curtis, N., Jones, M. E. H., Evans, S. E., O’Higgins, P. & Fagan, M. J. Cranial sutures work collectively to distribute strain throughout the reptile skull. Interface 10, 1–8 (2013).

  57. 57.

    Holliday, C. M. New insights into dinosaur jaw muscle anatomy. The Anatomical Record 292, 1246–1265 (2009).

  58. 58.

    Molnar, R. E. The Cranial Morphology and Mechanics of Tyrannosaurus rex (Reptilia: Saurischia) PhD thesis thesis, University of California (1973).

  59. 59.

    Molnar, R. E. In Tyrannosaurus rex. The Tyrant King (eds Larson, P. & Carpenter, K.) 255–286 (2008).

  60. 60.

    Schantz, P., Randallfox, E., Hutchison, W., Tyden, A. & Astrand, P. O. Muscle-fiber type distribution, muscle cross-sectional area and maximal voluntary strength in humans. Acta Physiol Scand 117, 219–226, https://doi.org/10.1111/j.1748-1716.1983.tb07200.x (1983).

  61. 61.

    Neufuss, J. et al. Fibre type composition in the lumbar perivertebral muscles of primates: Implications for the evolution of orthogrady in hominoids. Journal of Anatomy 224, 113–131, https://doi.org/10.1111/joa.12130 (2014).

  62. 62.

    Dickinson, E., Stark, H. & Kupczik, K. Non-destructive determination of muscle architectural variables through the use of DiceCT. Anatomical Record (in press).

  63. 63.

    Diogo, R., Bello-Hellegouarch, G., Kohlsdorf, T., Esteve-Altava, B. & Molnar, J. L. Comparative myology and evolution of marsupials and other vertebrates, with notes on complexity, bauplan, and “scala naturae”. Anatomical Record 299, 1224–1255, https://doi.org/10.1002/ar.23390 (2016).

  64. 64.

    Tanner, W. W. & Avery, D. F. Buccal floor of reptiles, a summary. The Great Basin Naturalist 42, 273–349 (1982).

  65. 65.

    Wegner, R. N. Der Schädelbau der Lederschildkröte Dermochelys coriacea Linné (1766). Abhandlungen der Deutschen Akademie der Wissenschaften zu Berlin. Klasse für Chemie, Geologie und Biologie 4, 1–80, 17 plates (1959).

  66. 66.

    Holliday, C. https://sketchfab.com/holliday/collections/adult-alligator-skull-atlas [access: 2018-12-20].

  67. 67.

    Iordansky, N. N. The Skull of the Crocodylia. In Biology of the Reptilia Vol. 4 Morphology D (eds Gans, C. & Parsons, T. S.) Ch. 3, 201–262 (Academic Press 1973).

  68. 68.

    Brochu, C. A. Osteology of Tyrannosaurus rex: Insights from a nearly complete skeleton and highresolution computed tomographic analysis of the skull. Journal of Vertebrate Paleontology 22 (2003).

  69. 69.

    Carr, T. D. Craniofacial ontogeny in Tyrannosauridae (Dinosauria, Coelurosauria). Journal of Vertebrate Paleontology 19, 497–520, https://doi.org/10.1080/02724634.1999.10011161 (1999).

  70. 70.

    Molnar, R. E. The cranial morphology of Tyrannosaurus rex. Palaeontographica Abteilung A, 137–176 (1991).

  71. 71.

    R-Core-Team. R: A language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria. ISBN 3-900051-07-0, http://www.R-project.org/ (2013).

  72. 72.

    Csardi, G. & Nepusz, T. The igraph software package for complex network research. InterJournal Complex Syst. 1659, 1–9 (2006).

  73. 73.

    Esteve-Altava, B., Marugan-Lobon, J., Botella, H., Bastir, M. & Rasskin-Gutman, D. Grist for Riedl’s mill: A network model perspective on the integration and modularity of the human skull. Journal of Experimental Zoology Part B-Molecular and Developmental Evolution 320, 489–500, https://doi.org/10.1002/jez.b.22524 (2013).

  74. 74.

    Clauset, A., Newman, M. E. J. & Moore, C. Finding community structure in very large networks. Physical Review E 70, https://doi.org/10.1103/PhysRevE.70.066111 (2004).

  75. 75.

    Shedlock, A. M. & Edwards, S. V. Amniotes (Amniota). In The TimeTree of Life (eds Hedges, S. B. & Kumar, S.) Ch. 52, 375–379 (Oxford University Press 2009).

  76. 76.

    Benton, M. J. Origin and relationships of Dinosauria. In The Dinosauria, 2nd edition (eds Weishampel, D. B., Dodson, P. & Osmólska, H.) 7–24 (University of California Press, 2004).

Download references

Acknowledgements

We are particularly thankful to Octavio Mateus for helping coding the connectivity matrix of the tyrannosaur and to Janine M. Ziermann for sharing the connectivity matrix of Didelphis. We wish to thank one anonymous reviewer for valuable comments. IW was supported by SNF-grant P300PA_164720. BE-A has received financial support through the Postdoctoral Junior Leader Fellowship Programme from “la Caixa” Banking Foundation (LCF/BQ/LI18/11630002). Part of this project was funded - to RD and BE-A - by an American Association of Anatomists Innovation Award.

Author information

Affiliations

  1. Senckenberg Center for Human Evolution and Palaeoenvironment (HEP) at Eberhard Karls Universität, Sigwartstraße 10, 72076, Tübingen, Germany

    • Ingmar Werneburg
  2. Fachbereich Geowissenschaften der Eberhard-Karls-Universität Tübingen, Hölderlinstraße 12, 72074, Tübingen, Germany

    • Ingmar Werneburg
  3. Museum für Naturkunde, Leibniz-Institut für Evolutions- & Biodiversitätsforschung an der Humboldt-Universität zu Berlin, Invalidenstraße 43, 10115, Berlin, Germany

    • Ingmar Werneburg
  4. Structure and Motion Laboratory, Department of Comparative Biomedical Sciences, The Royal Veterinary College, London, United Kingdom

    • Borja Esteve-Altava
  5. Departament de Prehistòria, Universitat Autònoma de Barcelona, Barcelona, Spain

    • Joana Bruno
  6. Paläontologisches Institut und Museum der Universität Zürich, Zürich, Switzerland

    • Marta Torres Ladeira
  7. Department of Anatomy, Howard University College of Medicine, Washington DC, USA

    • Rui Diogo
  8. Department of Experimental and Health Sciences, Pompeu Fabra University, Barcelona, Spain

    • Borja Esteve-Altava

Authors

  1. Search for Ingmar Werneburg in:

  2. Search for Borja Esteve-Altava in:

  3. Search for Joana Bruno in:

  4. Search for Marta Torres Ladeira in:

  5. Search for Rui Diogo in:

Contributions

Conceptualization. I.W., B.E.-A., R.D. Data collection: I.W., R.D., M.T.L., J.B. Data analysis: B.E.-A. Writing paper: I.W., B.E.-A. Revising manuscript: I.W., R.D., B.E.-A., M.T.L., J.B. Illustrations: J.B. (skull drawings), I.W., B.E.-A.

Competing Interests

The authors declare no competing interests.

Corresponding author

Correspondence to Ingmar Werneburg.

Supplementary information

About this article

Publication history

Received

Accepted

Published

DOI

https://doi.org/10.1038/s41598-018-37976-8

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.