Table 3 Parameters of homogeneous and heterogeneous bonding for the ADCB test.

From: Organic-Inorganic Solid-State Hybridization with High-Strength and Anti-Hydrolysis Interface

Bonding conditions Al-Al PI-PI Al-PI
Surface treatment Ar-FAB bombardment20 for 30 s Water-assisted VUV irradiation process18,19 at 2.8RH% for 5 min E-VUV treatment for the predetermined exposures (see Fig. S2c)
Contact pressure (MPa) ~2.07 ~1.68 ~4.00
Contact area (mm2) 400.0 400.0 100.0
Temperature (°C) 200 150 150
Bonding time (min) 10 10 10