A new transaminase (VbTA) was identified from the genome of the halotolerant marine bacterium Virgibacillus 21D. Following heterologous expression in Escherichia coli, it was located entirely in the insoluble fraction. After a single mutation, identified via sequence homology analyses, the VbTA T16F mutant was successfully expressed in soluble form and characterised. VbTA T16F showed high stability towards polar organic solvents and salt exposure, accepting mainly hydrophobic aromatic amine and carbonyl substrates. The 2.0 Å resolution crystal structure of VbTA T16F is here reported, and together with computational calculations, revealed that this mutation is crucial for correct dimerisation and thus correct folding, leading to soluble protein expression.
Transaminases (TAs, also known as aminotransferases) have been extensively studied in recent years for their potential as biocatalysts1,2,3. TAs require pyridoxal phosphate (PLP) as a coenzyme and catalyse the transfer of an amino group from an amino donor to a carbonyl acceptor, thus generating new amines and carbonyls, often with high stereoselectivity. Major efforts have been devoted to the discovery of new TAs and the evolution of known proteins for obtaining biocatalysts with selectivity and robustness fit for preparative biotransformations. To date, more than 60 microbial TAs have been described as potential biocatalysts, of which about 20 have been identified only in the last two years4. A number of examples of the evolution by protein engineering of natural TAs into more stable and more selective enzymes, with larger substrate scopes have also been reported5,6,7,8,9,10. This endeavor was made possible by the availability of new TA crystal structures that have provided a better insight into the functional mechanisms of these enzymes1,11. In addition, immobilisation of TAs has been shown to enable catalysis under practical conditions (in the presence of co-solvents, stoichiometric amounts of the amine donor) in continuous reactors, where the reaction can be performed with better productivity and long-term stability of the biocatalyst12,13,14.
Extremophile microorganisms (microbial species withstanding extreme conditions, such as low/high temperatures, low/high pH, high ionic strength and high hydrostatic pressure) have great potential as a source of enzymes that are active under harsh conditions15. In particular, marine microorganisms are known to produce enzymes characterised by outstanding tolerance to organic solvents and high salt concentrations16. The recruitment of new enzymes from marine microorganisms as selective and robust biocatalysts is highly attractive. A TA from the halo-adapted bacterium Halomonas elongata proved tolerant to the presence of co-solvents up to 20% and showed remarkable stability under operating conditions17. In this context, different biocatalytic activities (ketoreductase, esterase, and transaminase) have been reported in marine bacteria, such as Virgibacillus sp. 21D, a strain that grows in NaCl concentrations of up to 12%18.
In this current study, a TA gene (VbTA) identified from the genome of Virgibacillus sp. 21D was codon optimised and expressed in E. coli, however, the protein was entirely found in inclusion bodies under all conditions studied. To address this problem, we successfully adopted a protein engineering approach, based on the mutation of a single residue (T16F) that resulted in sufficiently soluble expression of recombinant VbTA T16F in Escherichia coli. Here, we report the functional and structural characterisation of the mutant enzyme. Analysis of the VbTA T16F crystal structure, together with molecular modelling, provides an insight into the role of F16 in stabilising the tertiary and quaternary structure of VbTA T16F.
Results and Discussion
Production of soluble VbTA after protein engineering
Protein sequences of TAs from Vibrio fluvialis (VfTA), Chromobacterium violaceum (CvTA), and Halomonas elongata (HeTA) were used to search for homologous genes in the genome of Virgibacillus sp. 21D; this analysis detected a sequence (VbTA) with an identity of 38% and 55% similarity with the HeTA sequence, and 36% similarity with VfTA and CvTA genes.
The selected 1350 bp gene encodes for a protein of 448 amino acid residues. Classification of PLP-dependent enzymes is primarily based on fold type19; e.g., fold type I, also referred to as the ‘aspartate aminotransferase superfamily’, which combines the highest quantity and diversity of members20. Transaminases are additionally divided into six classes depending on common structural features and sequence similarity; VbTA, according to its sequence, belongs to fold type I and the class III subgroup. Based on sequence alignments, it was possible to identify three highly conserved residues (see ConSurf analysis, Supplementary Figure 1) that bind PLP: D24 and Y148, involved in salt bridge and hydrogen bond formation with PLP, respectively, and K273 that forms a Schiff base with PLP (Fig. 1).
The codon optimised VbTA gene sequence was cloned into different conventional E. coli expression systems (see Materials for details) and expressed under different fermentation settings (temperature, expression time, and inducer concentration) using a Mutisimplex optimization design21, resulting in the accumulation of expressed protein as insoluble inclusion bodies, under all conditions tested. The halophilic archaeon host Haloferax volcanii22 was also tested to optimise the marine transaminase expression, without any significant improvement.
While insoluble expression can be due to incompatibility of the host cytoplasmic environment, it is also known that misfolding can be linked to specific mutations in the sequence23. All fold type-I TAs reported in literature exist as dimers or tetramers and are generally produced as soluble proteins1. Therefore, the VbTA sequence was further analysed to gain insight into its structure and lack of solubility. Previous structural studies, whereby the active site of a HeTA homology model was probed by site directed mutagenesis to investigate the enzyme affinity for specific aromatic substrates24, highlighted that F18 (corresponding to T16 in VbTA) is a key active site residue in the catalytic pocket. It forms a strong interaction with a second phenylalanine (F84, contributed by the second monomer), thus stabilizing the compact dimeric structure. He-TA F18A was generated at the time to increase the size of the small pocked to shift the activity of the enzyme towards bulky-bulky substrates, however this variant was found to be completely insoluble (data not shown), suggesting that the aromatic side chain at position 16 was essential for the correct folding of the protein. Furthermore, using the program ConSurf (http://consurf.tau.ac.il)25, sequence alignments made with around 500 homologous protein sequences showed that this position is highly conserved for aromatic residues (76.8% Phe, 16.3% Tyr, see Supplementary Figures 1 and 2). Therefore, based on the hypothesis that dimerisation is critical for solubility, and on the fact that amino acids involved in the structural stabilisation of the functional homodimer must be evolutionary preserved, to some extent, the mutant VbTA T16F was produced.
Expression of the N-terminal His-tagged transaminase was performed in a conventional BL21 DE3 E. coli strain, transformed with the expression vector pET100-D-TOPO and its expression under different fermentation conditions was compared by SDS-PAGE (Supplementary Figure 3). The best results were achieved in ZYM-5052 auto-induction medium, with incubation at 30 °C, with shaking at 150 rpm, for 24 h. VbTA T16F migrated with a MW of 50–55 kDa in agreement with its calculated MW of 53.2 kDa (including 4.1 kDa corresponding to the His-tag). In order to determine the quaternary arrangement of VbTA T16F, size-exclusion chromatography experiments were carried out, resulting in an estimated MW of 104 kDa, corresponding to a dimeric quaternary structure (theoretical value 106 kDa).
Characterization of transaminase activity
A standard assay, using (S)-1-phenylethylamine as the amino donor and pyruvate as the amino acceptor, was used to determine the transaminase activity of VbTA T16F26. The highest activity was observed at pH 8.0 and 45 °C, with 60% of the initial activity still maintained at 60 °C. As described for the first time by Ikai et at.27, this mesophilic profile could be related to the high aliphatic index (94.44) of VbTA T16F. Stability tests at different pHs and temperatures showed that the enzyme is highly stable at temperatures up to 45 °C when stored at pH 8.0 (see Supplementary Figure 4 for details).
Virgibacillus sp. strain 21D was isolated from a deep hypersaline anoxic basin characterised by the presence of high concentration of MgCl2 (5 M)18. This strain also grows in presence of NaCl concentrations up to 1.5 M, which may imply halotolerant behavior of its enzymes. As previously observed, enzymes from halotolerant microorganisms are stable in conditions of high ionic strength and co-solvents, which are often crucial for the reaction or storage medium in biocatalysis. Stability towards organic solvents (Fig. 2) was relatively high in most solvents tested; the enzyme, stored at 25 °C for 2 days in the presence of 20% (v/v) methanol (MeOH) maintained 94–95% of its initial activity. Activity of VbTA T16F in the presence of 10% (v/v) MeOH was nearly unaffected and around 50% activity was observed in the presence of 20% (v/v) DMSO. This tolerance towards polar organic solvents, commonly employed for solubilising hydrophobic substrates, is quite remarkable and significantly better than previously reported for other TAs1.
Stability of VbTA T16F in the presence of different concentrations of NaCl and KCl is reported in Fig. 3. VbTA T16F was stable and exhibited 63–65% of its initial activity after 7 days in the presence of 1 M NaCl (5.84%) and up to 80% in the presence of 1 M KCl (7.45%); even at 3 M NaCl (17.5%) still 40% of residual activity was retained after 1 week.
Under optimal reaction conditions, the maximum turnover number (kcat) of VbTA T16F was 0.099 s−1 and measured Michaelis–Menten constants (KM) were 1.9 mM and 10.7 mM for (S)-1-phenylethylamine and pyruvate, respectively (see Supporting Information for further details).
Different amino acceptors and donors were evaluated under standard conditions (Table 1) to evaluate the substrate scope of VbTA T16F.
Hydrophobic substrates bearing aromatic groups were the preferred substrates, both as amino donors and acceptors, whereas small aliphatic substrates and keto-sugars were not generally converted; pyruvate/alanine were among the only small polar substrates accepted. VbTA T16F showed a complete S-enantioselectivity toward 1-phenylethylamine.
The crystal structure of VbTA T16F
In order to investigate the structural bases that govern the improved solubility of the heterologously expressed T16F mutant, the 3D structure of VbTA T16F was solved at 2 Å resolution by X-ray crystallography. VbTA T16F crystallised with one monomer in the asymmetric unit (Matthews coefficient (VM) of 2.68 A3/Da, with an estimated solvent content of 54.1%. Electron density was evident for residues 2 to 444 with no gaps. One molecule of PLP was bound at the active site, although it does not form a covalent aldimine bond with the catalytic lysine residue (K273), as seen in the crystal structures of many other PLP-dependent enzymes (See Supplementary Figure 5).
The VbTA T16F monomer possesses the canonical class III (S)-selective ω-aminotransferase fold, comprising two domains: a PLP-dependent transferase-like domain (residues 81 to 313) that hosts a central, seven-stranded mixed β-sheet (β4-β10-β9-β8-β7-β5-β6), with β-strand 10 being antiparallel to the rest, surrounded by 8 α-helices and three 310 helices (η1-3) (Fig. 4a); ii) domain 2 (residues 2-80; 314–444) that contains a small N-terminal sub-domain (residues 2 to 49; α1-α2-β1-β2-β3) (Fig. 4b).
In agreement with the majority of class III TAs, VbTA T16F forms a dimer, generated between VbTA T16F chain A and its symmetry-related monomer (180° rotation) (Fig. 5a). Dimerisation covers an interaction surface area of 5463 A2, involving 103 residues from each monomer and 48 hydrogen bonds (as calculated using PDBsum)28.
The closest structural homolog to VbTA T16F is the apo-form of the omega transaminase from Chromobacterium violaceum (PDB entry 4A6R), with a sequence identity of 37.5% over 432/443 aligned residues (RMSD value = 1.3 Å)11. The sequence and structural conservation of VbTA T16F with all homologous structures deposited in the PDB was assessed using ENDscript 2.0 (http://endscript.ibcp.fr)29. 125 deposited unique structures (sequence conservation > 30%) were superimposed with VbTA T16F. As expected, the highest conservation was located to the PLP-binding domain residues; the least conservation was observed in flexible loop regions, and in particular in the N-terminal domain that mediates dimerization (Fig. 5b).
Based on the availability of a holo-, two apo-forms and intermediate states of CvTA, Humble et al., demonstrated for the first time (for a transaminase) that, upon PLP binding, the enzyme undergoes extensive structural rearrangements in three loop regions that form the architecture of the active site11. In particular, the N-terminal subdomain of domain 2 completely refolds, as indicated by the lack of electron density in the apo-form of the CvTA crystal structure (PDB entry 4A6R). Correct structural reorganisation of these loops was shown to be essential to form the catalytic pocket at the dimer interface.
F16 is located in a critical position, at the center of the 14-residue loop, connecting α1 to α2 of subdomain 2 (Fig. 5c,d). This loop clasps between α11 (domain 1) and α12 (domain 2) of the opposing monomer, locking the dimer together (Fig. 5c). F16 has a clear role in stabilising the dimer interface, making 26 contacts (<4 Å) with main- and side- chain atoms from six residues in the opposing monomer, including three hydrogen bonds with the carbonyl oxygen atoms of L303 (3.4 Å) and H305 (2.97 Å), and the nitrogen atom of the α-amine group of S84 (2.84 Å) (Fig. 5d). Such interactions result in the stabilisation of a second loop (residues 298–313) that contributes to the active site. The correct positioning of this loop is essential as it houses the highly conserved residue T308 that binds PLP via two hydrogen bonds between the phosphate oxygen atom (O2P) of PLP and the main chain amide nitrogen atom (length 2.78 Å) and side chain hydroxyl atom (length 2.64 Å) of T308. Furthermore, T308, in turn, also hydrogen bonds (length 2.68 Å) to the catalytic lysine residue K273 (NZ atom) via its side chain hydroxyl atom (See Supplementary Figure 5). These observations indicate that the loss of the F16 interaction network by substitution with threonine would result in significant destabilisation of the dimer interface, as confirmed in structural bioinformatics calculations described below.
Stability and affinity calculations (wt versus T16F)
To evaluate the stability of monomeric and homodimeric forms of VbTA, we performed in silico mutagenesis simulations and evaluated protein stability and affinity (Table 2).
The introduction of the T16F mutation significantly increases the protein stability, with a contribution of 4.82 kcal/mol computed for the monomeric forms. Since the F16T mutation is located at the dimerisation interface of VbTA, its impact is significant for the homodimerisation process. The affinity of the protomers for one another differs by 14.23 kcal/mol between the wild type VbTA and the F16T mutant, suggesting that the latter has a propensity to dimerise.
The stability of the VbTA T16F dimer is 10.24 kcal/mol higher than mutant monomer (2 protomers × 4.82 kcal/mol), suggesting that dimerisation can increase T16F mutant stabilisation not only through intramolecular but also via intermolecular interactions (5.12 kcal/mol protomer).
In silico solvent analysis
The surface area regions of VbTA T16F, with significant hydration free energy contributions (Fig. 6, Panel a, solid green surface), correspond to superficial, negatively charged, glutamic and aspartic acid residues (46 out of 443 total residues). The presence of salt at high concentrations can significantly stabilise VbTA T16F, specifically via extensive interactions with positively charged sodium ions (Fig. 6, Panel b, dotted cyan surface), as can be appreciated from the almost perfect superposition between the hydration free energy and the relative sodium density surfaces. Differently, chloride ions (Fig. 6, Panel b, dotted yellow surface) do not seem to concentrate, to the same extent, around the solvent shell close to VbTA T16F and thus do not play a similar, strong stabilisation role as sodium ions. The Lennard-Jones probe particles (Fig. 6, Panel c, orange surface lines) concentrate all around the VbTA T16F surface, generating a diffused and extended interaction network, but they avoid the high hydration free energy areas (Fig. 6, Panel a, solid green surface) that are preferentially occupied by sodium ions (Fig. 6, Panel b, dotted yellow surface and Panel c, yellow surface lines).
Our data illustrate how the strategic mutation of a single residue can improve the heterologous expression of an otherwise, unstable/insoluble protein, and represents a strategy that may be adopted for other TA enzymes. This approach was employed to prepare a new transaminase (VbTA) from the highly tolerant marine bacterium Virgibacillus sp. 21D. The mutant VbTA T16F was obtained as soluble protein in E. coli, and showed remarkable stability towards organic solvents and displayed activity over hydrophobic aromatic substrates (both primary amines and ketones/aldehydes). The crystal structure of VbTA T16F and related computational calculations reveal the crucial structural role of the N-terminal subdomain and the T16F mutation for correct active site architecture and stable dimerisation.
Materials and Methods
Marine microorganism, wt VbTA identification, cloning and expression
Virgibacillus sp. 21D (EMBL database accession numbers HG799644) was isolated from the water-brine interface of the deep hypersaline anoxic basin Discovery on the Mediterranean Ridge30. Virgibacillus sp. 21D genome was sequenced and the data were deposited in The Seed database. Genes were annotated using the RAST software42 (Rapid Annotation using Subsytems Technology). Virgibacillus sp. 21D was grown in CYSP medium31 (casitone 15 g/L, yeast extract 5 g/L, soytone 3 g/L, peptone 2 g/L, MgSO4*7H2O 15 mg/L, FeCl3*6H2O 116 mg/L, MnCl2*4H2O 20 mg/L, NaCl 30 g/L) at 30 °C. After 24 h, cells gown to the stationary phase were harvested and genomic DNA was extracted using the GenElute Bacterial Genomic DNA Kit (Sigma-Aldrich). The VbTA gene was identified by homology, searching Chromobacterium violaceum, Vibrio fluvialis and Halomonas elongata transaminase protein sequences against the Virgibacillus sp. 21D genome at default settings of RAST software. All three enzyme sequences matched with a gene annotated as an omega-amino acid-pyruvate aminotransferase. The gene was cloned into pET100-D-TOPO and pET101-D-TOPO plasmid vectors (His tag fused at the N- and C-termini, respectively) (Invitrogen). Expression of the recombinant VbTA protein was performed using BL21(DE3), BL21(DE3)Star, Rosetta(DE3), Codon Plus RIPL E. coli strains. VbTA was coexpressed with the pG-KJE8 plasmid that encodes for the chaperonins dnaK, dnaJ, grpE, groES and groEL, according to the manufacturer’s instructions (Takata Clontech). Expression cultures were grown from a single bacterial colony for 24 h at 18, 25, 30, 37 °C, on a rotatory shaker at 200 rpm, in flasks containing LB/TB/ZYM-5052 auto-induction medium32 supplemented with 100 µg/mL ampicillin. For LB and TB media, 0.5 mM IPTG was added to induce protein expression at an OD600nm of 0.6, inducing for 24 h, unless otherwise stated.
VbTA T16F cloning, expression and purification
The VbTA gene harboured in a pET100-D-TOPO plasmid was mutated employing the QuikChange Lightning Site-Directed Mutagenesis Kit (Agilent Technologies) using standard protocols. Primers were designed using the QuickChange Primer Design tool (Agilent Technologies).
The best expression conditions were observed using BL21(DE3) cells transformed with the pET100-D-TOPO vector in auto-induction medium33. Pellets derived from 300 mL cultures were resuspended in approx. 12 mL (2 mL per g pellet) of wash buffer (50 mM Tris-HCl pH 8.0, 100 mM NaCl, 0.1 mM PLP, 30 mM imidazole) and lysed by sonication, as previously described17. The bacterial lysate was clarified by centrifugation at 13,000 × g for 1 h at 4 °C, and filtered using a 0.45 μM filter (Millipore). Using an ÄKTA Start System (GE Healthcare), crude extract was loaded at a flow rate of 1 mL/min into a 1 mL HisTrap HP column packed with NiSO4 (0.1 M). The column was washed with wash buffer for 10 column volumes (CVs) and the purified protein was eluted with elution buffer (50 mM Tris-HCl pH 8,0, 100 mM NaCl, 0.1 mM PLP, 300 mM imidazole), following an intermediate wash step with 10 CVs of buffer, prepared by mixing 15% elution buffer with wash buffer, to remove non-specifically bound proteins. Fractions containing the purified enzyme were desalted via overnight dialysis against 50 mM phosphate buffer pH 8, containing 0.1 mM PLP. The purified enzyme was quantified by Epoch Take3 and stored at 4 °C.
The purified recombinant enzyme was quantified and stored at 4 °C. A kinetic assay derived from Schätzle et al.26 was used as standard enzymatic assay using pyruvate as the amino acceptor except where stated otherwise. The reactions were carried out at 25 °C employing a reaction mixture containing 1 mL phosphate buffer (50 mM, pH 8), 2.5 mM (S)-(–)-1-phenylethylamine, 2.5 mM pyruvate, 0.25% DMSO, 0.1 mM PLP and an appropriate amount of enzyme. These parameters were modified to investigate the behaviour of the enzyme in different reaction conditions. Modifications to the standard assay are indicated when applied. The activity was estimated following the production of acetophenone during the first three minutes of reaction at 245 nm.
Size exclusion chromatography
The molecular mass of VbTA T16F was estimated by size exclusion chromatography on a Superdex 200 (10/300) GL column with a total bed volume of 24 mL (GE Healthcare), pre-equilibrated with 20 mM phosphate buffer pH 8.0, containing 150 mM NaCl. Elution was carried out at a flow rate of 0.2 mL/min at 4 °C and the column was calibrated using the following MW markers: β-amylase (200 kDa), yeast alcohol dehydrogenase (150 kDa), bovine serum albumin (66 kDa), carbonic anhydrase from bovine erythrocytes (29 kDa), cytochrome c from horse heart (12.4 kDa), Blue Dextran (2000 kDa) was used to calculate the void volume.
Enzymatic reactions were carried out at 37 °C in potassium phosphate buffer (100 mM, pH 8.0) containing 10 mM amino donor (20 mM if racemic), 10 mM amino acceptor and 0.1 mg/mL of VbTA T16F in a reaction volume of 200 μL. Enzymatic activity under diverse reaction conditions was established employing (S)-(–)-1-phenylethylamine as the amino donor and pyruvate as the acceptor. One enzymatic unit was defined as the amount of enzyme that converts 1 μmol of (S)-(–)-1-phenylethylamine in 1 min. To study the effect of pH on enzyme activity and stability, a universal buffer was used instead of the phosphate buffer. The effect of co-solvents on VbTA T16F activity and stability was studied by storing the enzyme in the presence of either 10% or 20% (v/v) of co-solvent at 4 °C. Before and after incubation the residual activity was determined using the standard spectrophotometric enzymatic assay in presence of the corresponding amount of co-solvents. Each run was performed in triplicate. The kinetic catalytic constants Vmax and Km were measured at pH 8.0 and 25 °C using the two spectrophotometric coupled assays as described above in the presence of 0.25% DMSO, 0.1 mM PLP and 0.1 mg/mL of VbTA T16F. Reactions were carried out with 5 mM pyruvate and varying concentrations (0.5–10 mM) of (S)-(–)-1-phenylethylamine, at 5 mM (S)-(–)-1-phenylethylamine and various concentrations (0.05–5 mM) of pyruvate. The initial velocity data were fitted to the Michaelis–Menten equation using the SigmaPlot software (Version 11.0).
The final conversion of the different amino acceptors was determined using a Thermo Scientific HPLC instrument equipped with Accucore C18, LC column, Particle size 2.6-micron, diameter 4.6 mm, length 150 mm. Substrates were detected at 210, 245, 280 nm using the following mobile phase A: formic acid (0.1% in water), B: ACN; the gradient elution method adopted was 15% B (10 min), increasing to 80% B (over 8 min), decreasing to 15% B (over 2 min) at 25 °C at a flow rate of 1 mL/min. The depletion of aromatic amines, aldehydes and the formation of acetophenone was evaluated using a calibration curve. Samples were injected after a 1:50 dilution with 0.2% HCl in the quenching step.
400 nl crystallisation drops of VbTA T16F solution (5 mg/ml prepared in 20 mM Tris-HCl pH 8.0, containing 2 mM dithiothreitol (DTT) and 50 μM (PLP) were set-up in 96-well round-bottomed sitting drop plates (Greiner), containing 100 μl of 96 Morpheus® screen conditions (Molecular Dimensions). VbTA T16F crystals grew in drops containing 50% VbTA T16F and Morpheus condition D10 (0.12 M Alcohols, 0.1 M Buffer System 3 (Trizma base and bicine, titrated to pH 8.5), 50% (v/v) Precipitant Mix 2 (40% (v/v) ethylene glycol; 20% (w/v) PEG 8000). As all Morpheus® conditions already cryoprotect, crystals were removed directly from the drop, prior to cryocooling in liquid nitrogen.
Data Collection and Structure Determination
X-ray diffraction data were collected at 2.0 Å resolution on a single VbTA T16F crystal at the automated MASSIF-1 (ID30a1) beamline at the European Synchrotron Radiation Facility (ESRF, Grenoble, France)34,35. Data were processed using XDS and assigned to a trigonal (P3221) space group using POINTLESS and scaled using SCALA; both included in the CCP4i suite. The 3D structure of VbTA T16F was solved using Molrep and the structure of a putrescine aminotransferase from Pseudomonas aeruginosa (PDB entry 5TI8; 43% sequence identity over 433 aligned residues) as a search model36. The structure was manually built using COOT and refined using phenix.refine until satisfactory refinement parameters were achieved (Rwork = 17.9%; Rfree = 21.8%). All residues are located in allowed regions of the Ramachandran plot, except for three residues, located in geometrically-restrained regions: S53, located between two β-turns and A283 and the catalytic K284. Data collection parameters and refinement statistics are shown in Supplementary Table 1.
In silico mutagenesis and affinity/stability analysis and calculations
In silico mutagenesis simulations and evaluation of protein stability and affinity were carried out using the BioLuminate suite and the OPLS3 force field (Schrödinger, LLC), using the Residue Scanning panel. After residue substitution, the new side chain, surrounding residues and backbone were sampled to the nearest energy minimum and an implicit solvent MM-GBSA method was used to retrieve the solvation energy and the binding affinity of the mutated monomers. The wild type VbTA monomer was generated from the experimental crystallographic structure of VbTA T16F mutant, crystallised as a monomer in the asymmetric unit. The dimer was generated using Chain A and the coordinates for its symmetry-related monomer (180° rotation).
In silico solvent analysis
In order to estimate the effect of the ionic strength on VbTA8 T16F stability, we carried out solvent analyses to characterise the interplay between the solvent (mainly water and salt) and the solute. Calculations were run using the three-dimensional reference interaction site model (3D-RISM) of the Molecular Operating Environment (MOE 2018.01). This application computes a time-averaged distribution of water H and O densities, along with free-energy maps for analysing solvent stability and solvation contributions to binding free-energy.
Calculations were run using the “Solvent analysis” program of the MOE suite and the AMBER10:EHT forcefield. Crystallographic water molecules were removed and VbTA8 was submitted to MOE QuickPrep program before 3D-RISM calculations with 1 M NaCl.
Cut-off values for both the relative sodium and chloride ion densities were set as four-fold denser than bulk and the cut-off value for hydrophobe density was set as two-fold denser than the bulk. In order to favour a graphical comparison between hydration free energy and relative ion and hydrophobe densities, a multiplication factor of 2 was applied to both the relative ion and hydrophobe density grid iso-levels.
Coordinates and structure factors have been deposited in the Protein Data Bank (www.rcsb.org) under accession number 6FYQ.
Guo, F. & Berglund, P. Transaminase biocatalysis: optimization and application. Green Chem. 19, 333–360 (2017).
Slabu, I., Galman, J. L., Richard, C., Lloyd, R. C. & Turner, N. J. Discovery, engineering, and synthetic application of transaminase biocatalysts. ACS Catal. 7, 8263–8284 (2017).
Gomm, A. & O'Reilly, E. Transaminases for chiral amine synthesis. Curr. Opin. Chem. Biol. 43, 106–112 (2018).
Ferrandi, E. E. & Monti, D. Amine transaminases in chiral amines synthesis: recent advances and challenges. World J. Microbiol. Biotechnol. 34, 13–23 (2018).
Savile, C. K. et al. Biocatalytic asymmetric synthesis of chiral amines from ketones applied to Sitagliptin manufacture. Science 329, 305–309 (2010).
Han, S. W., Park, E. S., Dong, J. Y. & Shin, J. S. Expanding substrate specificity of ω-transaminase by rational remodeling of a large substrate-binding pocket. Advanced Synthesis & Catalysis 357, 2712–2720 (2015).
Skalden, L. et al. Two subtle amino acid changes in a transaminase substantially enhance or invert enantiopreference in cascade syntheses. Chem. Eur. J. Chem. Bio. 16, 1041–1045 (2015).
Weiß, M. S. et al. Protein-engineering of an amine transaminase for the stereoselective synthesis of a pharmaceutically relevant bicyclic amine. Org. Biomol. Chem. 14, 10249–10254 (2016).
Weiß, M. S. et al. Amine transaminase engineering for spatially bulky substrate acceptance. Chem. Eur. J. Chem. Bio. 8, 6965–6966 (2017).
Huang, J., Xie, D.-F. & Feng, Y. Engineering thermostable (R)-selective amine transaminase from Aspergillus terreus through in silico design employing β-factor and folding free energy calculations. Biochem. Biophys. Res. Commun. 483, 397–402 (2017).
Humble, M. S. et al. Crystal structures of the Chromobacterium violaceum ω-transaminase reveal major structural rearrangements upon binding of coenzyme PLP. FEBS J. 279, 779–792 (2012).
Van den Biggelaar, L., Soumillion, P. & Debecker, D. P. Enantioselective transamination in continuous flow mode with transaminase immobilized in a macrocellular silica monolith. Catalysts 7, 54 (2017).
Planchestainer, M. et al. Continuous flow biocatalysis: production and in-line purification of amines by immobilised transaminase from Halomonas elongata. Green Chem. 19, 372–375 (2017).
Tamborini, L., Fernandes, P., Paradisi, F. & Molinari, F. Flow bioreactors as complementary tools for biocatalytic process intensification. Trends Biotechnol. 36, 73–88 (2018).
DasSarma, S. & DasSarma, P. Halophiles and their enzymes: negativity put to good use. Curr. Opin. Macrobiol. 25, 120–126 (2015).
Antranikian, G., Vorgias, C. E. & Bertoldo, C. Extreme environments as a resource for microorganisms and novel biocatalysts. Adv. Biochem. Eng. Biotechnol. 96, 219–262 (2005).
Cerioli, L., Planchestainer, M., Cassidy, J., Tessaro, D. & Paradisi, F. Characterization of a novel amine transaminase from Halomonas elongata. J. Mol. Catal. B: Enzymatic 120, 141–150 (2015).
De Vitis, V. et al. Marine microorganisms as source of stereoselective esterases and ketoreductases: kinetic resolution of a prostaglandin intermediate. Mar. Biotechnol. 17, 144–152 (2015).
Schneider, G., Käck, H. & Lindqvist, Y. The manifold of vitamin B6 dependent enzymes. Structure 8, R1–R6 (2000).
Steffen-Munsberg, F. et al. Bioinformatic analysis of a PLP-dependent enzyme superfamily suitable for biocatalytic applications. Biotechnol. Adv. 33, 566–604 (2015).
Romano, D., Gandolfi, R., Guglielmetti, S. & Molinari, F. Enzymatic hydrolysis of capsaicins for the production of vanillylamine using ECB deacylase from. Actinoplanes utahensis. Food Chem. 124, 1096–1098 (2011).
Strillinger, E., Grotzinger, S. W., Allers, T., Eppinger, J. & Weuster-Botz, D. Production of halophilic proteins using Haloferax volcanii H1895 in a stirred-tank bioreactor. Appl. Microbiol. Biotechnol. 100, 1183–1195 (2016).
Idicula-Thomas, S. & Balaji, P. V. Understanding the relationship between the primary structure of proteins and its propensity to be soluble on overexpression in Escherichia coli. Protein Sci. 14, 582–592 (2005).
Contente, M. L., Planchestainer, M., Molinari, F. & Paradisi, F. Stereoelectronic effects in the reaction of aromatic substrates catalysed by Halomonas elongata transaminase and its mutants. Org. Biomol. Chem. 14, 9306–9311 (2016).
Ashkenazy, H., Erez, E., Martz, E., Pupko, T. & Ben-Tall, N. ConSurf 2010: calculating evolutionary conservation in sequence and structure of proteins and nucleic acids. Nucleic Acids Res. 38, W529–W533 (2010).
Schatzle, S., Hohne, M., Redestad, E., Robins, K. & Bornscheuer, U. T. Rapid and sensitive kinetic assay for characterization of ω-transaminases. Anal. Chem. 81, 8244–8248 (2009).
Ikai, A. Thermostability and aliphatic index of globular proteins. J. Biochem. 1898, 1895–1898 (1980).
Laskowski, R. A., Jabłońska, J., Pravda, L., Vařeková, R. S. & Thornton, J. M. PDBsum: Structural summaries of PDB entries. Protein Sci. 27, 129–134 (2018).
Robert, X. & Gouet, P. Deciphering key features in protein structures with the new ENDscript server. Nucleic Acids Res. 42, W320–4 (2014).
van der Wielen, P. W. et al. The enigma of prokaryotic life in deep hypersaline anoxic basins. Science 4, 121–123 (2005).
Romano, D. et al. Enhanced enantioselectivity of Bacillus coagulans in the hydrolysis of 1,2-O-isopropylidene glycerol esters by thermal knock-out of undesired enzymes. Tetrahedron Asymmetry 16, 841–845 (2005).
Pettersen, E. F. et al. UCSF chimera – a visualization system for exploratory research and analysis. J. Comput. Chem. 25, 1605–1612 (2004).
Studier, F. W. Protein production by auto-induction in high-density shaking cultures. Protein Expr. Purif. 41, 207–234 (2005).
Bowler, M. W. et al. MASSIF-1: A beamline dedicated to the fully automatic characterisation and data collection from crystals of biological macromolecules. J. Sync. Rad. 22, 1540–1547 (2015).
Svensson, O., Monaco, S., Popov, A. N., Nurizzo, D. & Bowler, M. W. Fully automatic characterization and data collection from crystals of biological macromolecules. Acta Cryst. D71, 1757–1767 (2015).
Wilding, M., Scott, C., Newman, J. & Peat, T. S. Crystal structure of a putrescine aminotransferase from Pseudomonas sp. strain AAC. Acta Crystallogr. F Struct. Biol. Commun. 73, 29–35 (2017).
Shin, J. S. & Kim, B. G. Exploring the active site of amine: pyruvate aminotransferase on the basis of the substrate structure-reactivity relationship: How the enzyme controls substrate specificity and stereoselectivity. J. Org. Chem. 67, 2848–2853 (2002).
This work was in part supported by the Biotechnology and Biological Sciences Research Council [grant number BB/P002536/1]. LJG gratefully acknowledges departmental ‘Linea 2’ funding for VbTA F16T structural studies. IE gratefully acknowledges departmental ‘Linea 2 – Azione A 2017’ funding. IE and TL research was supported by grants from MIUR – Progetto Eccellenza.
The authors declare no competing interests.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Guidi, B., Planchestainer, M., Contente, M.L. et al. Strategic single point mutation yields a solvent- and salt-stable transaminase from Virgibacillus sp. in soluble form. Sci Rep 8, 16441 (2018). https://doi.org/10.1038/s41598-018-34434-3
- Mutation T215F
- Hydration Free Energy
- Deep Hypersaline Anoxic Basins
- Acceptor Amino
This article is cited by
Characterization of proteins from the 3N5M family reveals an operationally stable amine transaminase
Applied Microbiology and Biotechnology (2022)
Recombinant expression of insoluble enzymes in Escherichia coli: a systematic review of experimental design and its manufacturing implications
Microbial Cell Factories (2021)
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.