Author Correction: Electrical Conductivity Distribution in Detonating Benzotrifuroxane

Article metrics

  • 118 Accesses

Correction to: Scientific Reports, published online 25 June 2018

This Article contains errors in Figure 8; the scale for the distribution of the electrical conductivity of the triaminotrinitrobenzene based explosive (TATB) is incorrect. The correct Figure 8 appears below as Figure 1.

Figure 1

Electrical conductivity profiles in detonating dense explosives: RDX (ρ = 1.74 g/cm3), TATB (ρ = 1.8 g/cm3), BTF (ρ = 1.9 g/cm3).

Author information

Correspondence to Nataliya Satonkina.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Satonkina, N., Ershov, A., Kashkarov, A. et al. Author Correction: Electrical Conductivity Distribution in Detonating Benzotrifuroxane. Sci Rep 8, 11788 (2018) doi:10.1038/s41598-018-29783-y

Download citation


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.