Figure 9 | Scientific Reports

Figure 9

From: Ultrahigh-temperature tensile creep of TiC-reinforced Mo-Si-B-based alloy

Figure 9

High-temperature test rigs used in this study. (a) Closed loop test system with a vacuum chamber; the load cell (L) and front glass window (GW) are highlighted. (b) Extensometer system placed in front of the GW. (c) Open vacuum chamber with a specimen (down arrow) and thermocouples (T) highlighted. (d) A specimen and graphite loading grips. The widths of the two gaps, Δ1 and Δ2, are recorded during creep testing.

Back to article page