A micro-CT-based method for quantitative brain lesion characterization and electrode localization

Lesion verification and quantification is traditionally done via histological examination of sectioned brains, a time-consuming process that relies heavily on manual estimation. Such methods are particularly problematic in posterior cortical regions (e.g. visual cortex), where sectioning leads to significant damage and distortion of tissue. Even more challenging is the post hoc localization of micro-electrodes, which relies on the same techniques, suffers from similar drawbacks and requires even higher precision. Here, we propose a new, simple method for quantitative lesion characterization and electrode localization that is less labor-intensive and yields more detailed results than conventional methods. We leverage staining techniques standard in electron microscopy with the use of commodity micro-CT imaging. We stain whole rat and zebra finch brains in osmium tetroxide, embed these in resin and scan entire brains in a micro-CT machine. The scans result in 3D reconstructions of the brains with section thickness dependent on sample size (12–15 and 5–6 microns for rat and zebra finch respectively) that can be segmented manually or automatically. Because the method captures the entire intact brain volume, comparisons within and across studies are more tractable, and the extent of lesions and electrodes may be studied with higher accuracy than with current methods.

the brain (see Methods; Supplementary Fig. S1). As our method relies on mineralizing the brain with osmium, it is incompatible with any further histology or immunofluorescence of the same sample.
Recently, researchers have demonstrated whole mouse brain staining for electron microscopy using a method that alternates incubation in osmium and reduced osmium, combined with a number of specialized buffers 11,12 . This method was developed in order to preserve ultra-structure needed for electron microscopy imaging. We focused instead on developing a much simpler staining protocol that would allow the researcher to place the sample in one solution and revisit the sample when it was time for sample embedding.
After two weeks, we dehydrated the tissue and embedded the sample in resin. Because these steps only require solution exchanges, it takes roughly the same amount of time to process one sample as it does many. As a result, it is easy to process many brains in parallel.
Once the resin had cured, we placed the sample in a micro-CT machine and generated a 3D digital volume of the sample. Many institutions have in-house micro-CT machines, and commercial micro-CT scanning services are also broadly available, where researchers can ship samples (which are embedded in hard resin by this point) to the vendor and get 3D digital volumes back. Typical scanning of a sample with a micro-CT machine takes 30-60 minutes of preparation followed by a few hours of scan time that requires no user input (these imaging runs can also be done overnight). Once the digital volume is available, the researcher may visualize, segment and analyze the data with commercial or freely available software. A few of these packages include Avizo, VGStudio Max, SPIERS (free), Osirix (free), 3D Slicer (free), ImageJ (free), VAST (free) and Adobe Photoshop.
Method Capabilities. Employing micro-CT for lesion quantification enables high precision reconstruction without incurring substantial labor time (tissue preparation essentially consists of serially incubating the brain in different solutions) or cost (micro-CT machinery is available at many institutions and micro-CT scanning is available for modest fees via third party commercial services). The method results in a fully manipulable 3D volume (Video 1, Fig. 2a). Whereas with traditional sectioning one orientation must be chosen, with micro-CT scanning, the brain can be virtually sliced coronally, sagittally, horizontally, or at any arbitrary orientation (Fig. 2b). This means that lesions can be visualized and quantified from any plane.
The resolution of the scan depends on the size of the sample. For an entire rat brain, including the olfactory bulbs, we were able to achieve a nominal resolution of about 12-15 μm voxels, meaning that optical slices would have a thickness of 12-15 μm, considerably thinner than conventional physical slice thicknesses for lesion quantification. Smaller brains, such as whole mouse or zebra finch brains, may be scanned at higher resolution (~5.6 μm voxels, Fig. 2e). Subsets of the sample may also be scanned at higher resolution, in some cases revealing finer features, such as individual neural tracts and individual glomeruli in the olfactory bulb (4.9 μm voxels, Fig. 2c).
In order to ensure that our staining method faithfully preserved the tissue at the level of resolution required for micro-CT imaging, we re-purposed a brain prepared for micro-CT imaging, sliced a piece of its cortex into 30 nm sections and imaged it with a scanning electron microscope (SEM). We found that tissue features about an order of magnitude smaller than the micro-CT resolution were well-preserved, making us confident that our staining method was not producing gross damage or introducing artifacts into the sample (Fig. 2d). We note that while the stained tissue quality was adequate for micro-CT imaging, the protocol described here is not recommended for sample preparation for high-resolution electron microscopy, as ultra-structural damage is evident at the sub-micron scale.
In order to test the versatility of our staining method, we replicated the method with a zebra finch brain. We found that the procedure also stained the zebra finch brain satisfactorily, indicating that our staining protocol may be largely applicable to most small brains (Fig. 2e). While our method can in principle be applied to brains of all sizes, we predict a significant increase in necessary incubation time for larger brains, such as macaques.
Brain Lesion Characterization. A major impetus for the development of this technique stemmed from attempting to quantify lesions in rat visual cortex. The visual cortex in the rat is in the far posterior end of the brain, and coronal sections in this area of cortex are not well attached to underlying subcortical structures. As a result, when sectioned, visual cortex often ends up in a few disconnected parts, further complicating attempts at 3D reconstruction. When these areas are lesioned, they make the already fragile sectioned tissue even more fragile, increasing the probability of damaging the sections during processing. By processing whole brains, we circumvent this problem by quantifying lesion extent in the context of an otherwise intact brain.
We induced a lesion in the visual cortex of an adult rat, allowed the lesion to "set" for several days, and processed the brain as described above. After scanning, we manually segmented the lesion and generated a lesion volume (Fig. 3). Because digital volumes allow virtual slicing, we had the ability to quantify the lesion from any orientation. This is a big advantage over traditional sectioning where one orientation must be chosen at the time of sectioning because lesion boundaries may be more apparent in some views than others, and ambiguities can be resolved with much higher confidence (Fig. 3b). Further, because the brain is intact, we were able to visualize the lesion volume in context, a powerful tool for understanding the extent of damage and how it may correlate with behavior (Fig. 3a).
Having found that we could quantify surface cortical lesions well, we next sought to characterize deep lesions and compare these results directly with the results obtained from traditional sectioning. To this end, we induced large bilateral lesions in dorso-lateral striatum (DLS) and adjacent cortical regions in two animals. After extracting the brains, we separated the hemispheres and processed the right halves traditionally, and prepared the left halves for micro-CT imaging (Fig. 4). For the left hemisphere of brain 1, we decided to manually segment every other virtual slice (slice thickness = 13.5 μm, thus every 27 μm) in the sagittal orientation and then generate a lesion volume (Fig. 4a). For the left hemisphere of brain 2, we decided to manually segment every 8 slices in the coronal orientation (simulating ~100 μm thick slices) (Fig. 4c). The interpolation to generate the volumes from our annotation worked very well in both cases, as can be seen by the lesion extent in the orientations Scientific RepoRTs | (2018) 8:5184 | DOI:10.1038/s41598-018-23247-z other than the ones manually segmented (Fig. 4a,c). This result indicates that researchers may prioritize detail or time when annotating lesions, both of which are advantages over traditional sectioning that normally results in time-consuming approximations.
We processed the right hemispheres traditionally, by slicing, Nissl-staining and imaging. Corresponding traditional and micro-CT slices are shown (Fig. 4b,d). In order to quantify lesion volume in the traditionally processed slices, we hand-registered the slices to the closest matching slice diagrams from an atlas 13 and we multiplied approximate lesion areas with slice thickness to arrive at volume estimates.
Although the lesions on each hemisphere for each brain are different, we expected them to be similar given that we injected the same amount of toxin at the same depths. Propitiously, we found that our volume estimates through micro-CT and traditional methods were concordant (brain 1 left (micro-CT): 34 mm 3 , brain 1 right (traditional): 32 mm 3 ; brain 2 left (micro-CT): 35 mm 3 , brain 2 right (traditional): 39 mm 3 ).  (13.9 μm voxels) at arbitrary orientations from a micro-CT scan of a Long-Evans rat. (c) Olfactory bulb scanned at higher resolution (4.9 μm voxels) revealing glomeruli (white arrowhead) and individual nerve fibers (blue arrowhead). (d) Scanning electron microscope (SEM) image (10 nm/pixel) of visual cortex of rat brain prepared for micro-CT imaging. (e) Zebra finch (Taeniopygia guttata) brain prepared for micro-CT imaging; 3D volume and 2D slices (5.6 μm voxels) in the coronal, horizontal and sagittal planes.
Reporting the locations of lesions, and how consistent lesion are among different test subjects is important in lesion studies. Thus, we report lesion locations as done traditionally (Fig. 4e) and as possible through micro-CT preparation ( Fig. 4f-h).
Electrode Localization. Traditional methods for verifying electrode location in the brain involve many of the same histological methods as lesion quantification, and as a result, these methods suffer from many of the same drawbacks. Often, after recordings are completed, current will be sent down the electrode to induce an electrolytic lesion near the tip. Physiologists then look for this lesion after sectioning and staining the brain. A disadvantage of this approach is that the lesion is generally bigger than the tip of the electrode, introducing some uncertainty about where exactly it was located. In addition, during sectioning, the lesioned area may be challenging to find and precisely locate in the 3D context of the brain. Because conventional electrode materials have different x-ray absorption properties as compared to osmicated brain tissue, we next sought to test whether our method would allow in situ localization of electrodes in the brain.
To test the utility of our method for localizing electrodes, we began by implanting a single tetrode in the brain of a rat and then subsequently perfused the animal with the electrodes in place. Recordings from this tetrode showed three isolated units ( Supplementary Fig. S2). We perfused the animal, and prepared the brain as described above for lesion quantification. To reduce "ringing" artifacts associated with CT imaging of metal electrodes, we scanned with a metal filter in front of the x-ray source, filtering out the harder x-rays responsible for the ringing. Scan results show that the tetrodes were easy to find and could be visualized from any orientation (Fig. 5a).  Since it is common to implant multiple tetrodes at a time, we repeated the above procedure with a 16-tetrode array inserted into the anterior cortex of a rat. Post implantation, we severed the electrodes, leaving them in place. We then perfused the animal and prepared the brain for micro-CT imaging. The tetrodes were easily distinguishable in the resulting 3D volumes (Video 2, Fig. 5c). Interestingly, we found that many tetrodes experienced notable excursions as they penetrated the brain (Fig. 5). Despite this "drift" in the positions of the tetrodes, our method allowed unambiguous tracing from the tip of the tetrode to the connector at the skull.
While severing the electrodes and leaving them in place enables precise localization of multiple electrodes with our method, it may not always be desirable or possible to leave electrodes in the brain (e.g. in the case of acute recordings with stiff electrodes). We thus set out to test whether our method could also be used for the localization of electrolytic lesions, which at least addresses the challenges that come with sectioning and staining, even if localizing electrode positions this way still suffers from imprecision induced by the size of the electrolytic lesion. We implanted an acute recording tungsten electrode in the anterior cortex of a rat and passed a high current in order to induce an electrolytic lesion. The lesion "set" over the course of the next few days, and we perfused the animal and prepared the brain for micro-CT imaging. We found that the electrolytic lesion was readily apparent in our micro-CT dataset (Fig. 5b) with a volume of 0.0064 mm 3 and a diameter of approximately 250 μm at its longest (it was oblong in shape).
We also asked whether our method could be used to locate the track of a retracted electrode. At a scanning resolution of 13.9 μm voxels, we were able to locate the track of a 75 mm diameter electrode (Fig. 5b Bottom left panel, white arrowhead), though the track was significantly more difficult to find as compared to the severed electrodes above.
Finally, while insulated metal electrodes are popular tools for neurophysiology, other recording technologies, such as silicon micro-machined electrode arrays are also widely used 14 . To test whether our method can also localize silicon probes, we implanted a rat with a silicon probe through posterior cortex, hippocampus and subcortical structures. We then severed the probe, allowed the animal to recover for 4 days (simulating conditions for chronic recording), and later perfused the animal and prepared the brain for micro-CT imaging. The silicon probe was easily identifiable in the resulting micro-CT volume (Video 3, Fig. 5d). Although the individual metal recording sites were not visible at our scanning resolution of 13.9 μm voxels (nor at a higher resolution scan of 7.4 μm voxels; data not shown), we did identify the probe's larger reference electrode site higher up the silicon shank (Fig. 5d, Top right and Bottom left panels, white arrows). Because this site is a known distance from the silicon probe's recording pads, the experimenter can nonetheless calculate the location of the probe's recording sites. While the silicon probe itself appeared at a similar grey-level as the surrounding osmicated tissue, the probe track was nonetheless visible due to disruption of the tissue adjacent to the probe (see Video 3).

Discussion
We have presented a new method for quantifying lesions and determining electrode location in small brains that combines electron microscopy-style staining techniques with micro-CT imaging. This method improves upon the quality of results of current standard methods, while at the same time requiring less labor and expertise to carry out. Although scientists have previously attempted to scan small animal brains with micro-CT machines (discussed below), the tissue preparation we have outlined here makes micro-CT imaging more accessible and useful for lesion quantification and electrode localization.
The method we propose comes at a time when there is increasing interest in micro-CT imaging and electron microscopy staining techniques. CT imaging has historically been common in the medical community (e.g. CT/ CAT scans), but it is gaining popularity in biology. For example, micro-CT imaging is very useful to scientists in evolutionary and comparative biology, who employ the technique to generate 3D reconstructions of fossils, bones and exoskeletons 15 . Such samples are easy to scan because their chemical composition (e.g. the calcium carbonate in bones) makes them visible to x-rays without any prior treatment.
A key challenge for using micro-CT methods for brain imaging is that brain tissue is mostly transparent to x-rays. Fortunately, a variety of staining techniques exist that can adequately mineralize soft issue and overcome its contrast problem in a wide-range of samples, from fish to insects to squid hatchlings 16 . Thus, scientists who study soft tissue have increasingly been looking to micro-CT imaging. For example, developmental biologists have employed micro-CT imaging to track embryo development 17 , entomologists have employed it to study mating ethology in Drosophila 18 and brain morphology in honeybees 19 , and very recently arachnologists have employed the method towards advancing spider neuroanatomy [20][21][22][23] .
Our work builds upon several previous studies that have suggested or applied micro-CT for imaging brains in various capacities 24 . For instance, one previous investigation performed on rabbits and mice proposed the use of micro-CT in the postmortem brain with a particular emphasis on its utility for histopathology, such as in the search for tumors and other abnormalities 25 . Although their samples were stained with proprietary MRI contrast agents, the authors predicted micro-CT's potential usefulness in lesion studies as a time-saving, non-destructive alternative, as well as in genetic and drug discovery screens. Another study proposed staining mouse brains within the skull with iodine for quickly determining gross anatomical differences during a screen 26 . However, because of the use of iodine, the authors faced uneven shrinkage of the tissue and opted to embed it in a hydrogel to compensate for the change. Recently, scientists reported using micro-CT to assess cerebral cavernous malformations, a disorder resulting in abnormally large and irregular capillaries, in mouse cerebellum using both osmium tetroxide 27,28 and aqueous iodine 29 . In the case of these studies, the samples were much smaller in volume (consisting of detached mouse hindbrains) and scanning resolution was reported at 9.5 μm voxels, whereas we reported higher resolutions for larger samples, such as whole zebra finch brains (scanned at 5.6 μm voxels). During our preliminary experiments, we found iodine potassium iodide solution (I 2 KI) did not satisfyingly stain nor generate the desired contrast in the rat brain. We did not observe any appreciable brain shrinkage using osmium and confirmed that the tissue was preserved at the cellular level (Fig. 2d).
Another alternative method for 3D brain volume reconstruction and lesion quantification is microscopic magnetic resonance imaging (μMRI) 30 . There are several advantages to μMRI, such as greater white/grey matter contrast 25 compared to micro-CT and the ability to scan soft tissue in vivo (micro-CT has been shown to be safe in vivo for bone scans 31,32 ). One study combined μMRI, micro-CT and histology in order to create a brain atlas for the short-tailed opposum 33 . In the case of this study, however, the micro-CT imaging was used for the skull and the μMRI was used for the brain. Nonetheless, the resolution of μMRI is poorer (~25 μm voxels for similar samples 34 ) and the technique is much more expensive because the machines are much more costly to obtain and maintain 25,35 . In many cases, ex vivo analysis of lesions is already a part of the standard work flow for lesion quantification, so the method proposed here represents only a mild modification to existing protocols.
Another possible method that could be implemented to quantify lesions in a similar fashion is high-resolution episcopic microscopy, similar to block-face EM, but with much thicker slices and optical microscopes 36 . However, Scientific RepoRTs | (2018) 8:5184 | DOI:10.1038/s41598-018-23247-z this technique requires a specialized setup, does not have as much commercial support as micro-CT, and is typically geared more towards smaller samples, such as embryos. One could envision a block-face apparatus that allowed whole-brain sectioning, in which case such a technique might be as useful as the one proposed here. Disadvantages of such an approach include the need for specialized microscope and sectioning hardware and the fact that the sample is destroyed in the course of imaging.
Our work also extends upon previous efforts to use x-rays to localize electrodes in the brain [37][38][39] . While previous methods for x-ray electrode localization have relied on MRI for visualizing soft tissue, our method captures both the electrode and the surrounding tissue in a single volumetric image and at high resolution. We have demonstrated that our method allows for straightforward localization of single tetrodes, tetrode arrays, electrolytic lesions, electrode tracks and silicon probes.
Because our method produces rich 3D brain anatomy data, a valuable future direction would be to build a micro-CT "average brain" atlas from multiple co-registered brains, in order to standardize lesion location and size quantification. Expanding this method to a number of model organisms would also be worthwhile. Based on our results with a zebra finch brain (Fig. 2e), we also expect that extending this method to other species would only be a matter of determining incubation time in osmium based on brain size.

Surgeries and Electrophysiology.
We conducted all animal experiments in accordance with NIH guidelines and protocols approved by the Institutional Animal Use and Care Committee (IACUC) at Harvard University. We used male and female Long-Evans rats (Charles River Laboratories, Wilmington, MA) for our experiments.
For electrophysiology experiments, we similarly anesthetized the animals, and drilled craniotomies. For the single tetrode implant, we implanted a tetrode stereotaxically in V1 and attached a head stage with dental cement. We drilled a second craniotomy in an anterior region of the contralateral hemisphere and inserted a ground wire parallel to the surface of the brain. We allowed the animal to recover overnight and recorded spontaneous neural activity the following day. We acquired electrical activity with a multiplexing headstage (RHD2132, Intan Technologies, Los Angeles, CA) at 30 kHz using Open Ephys software (http://www.open-ephys.org/gui/) and sorted the spikes with the [SPIKO]saurus [CLUST] MATLAB toolbox (https://github.com/jmarkow/spikoclust). Before perfusing the animal, we anesthetized it with isoflurane, and drilled off the head implant, severing the tetrode wire and leaving it still inserted in the brain. By leaving the wire in the brain, we aimed to maximize the accuracy in its localization. Moreover, because the tetrode is made of solid metal, we predicted it would scatter x-rays much more strongly than osmicated brain tissue, making it easy to locate.
For the 16-tetrode implant, we followed the procedure as described for a single tetrode but implanted the tetrodes in anterior cortex. As this experiment was a proof of concept, we did not conduct any recordings and sacrificed the animal after the surgery. Before sacrificing, we applied Vetbond (3 M, St. Paul, MN) to the electrodes and brain in order to prevent displacement and then cut the electrodes with scissors. An alternative method to sever the electrodes while introducing minimal disturbances would be to burn them off. Tetrodes were made by spinning together four 12.5 μm diameter nichrome wires (tetrode diameter approximately 25 μm) and gold-plating them to 250-400 kOhms. The tetrode array was made by threading tetrodes through an 8 × 2 grid of 34 AWG polyimide tubes (each tube had a diameter of 0.1601 mm, making each tetrode about 320 μm apart).
To induce an electrolytic lesion, we similarly anesthetized an animal and drilled a craniotomy in anterior cortex. We inserted a tungsten electrode (Scientific Microelectrode, Catalog #367-040605-00, Lot #30005086, Alpha Omega, Alpharetta, GA) with a 75 μm diameter and passed 40 μA of current for 15 seconds with the cathode to the animal's tongue and the anode to the electrode. We retracted the electrode slowly and allowed the animal to recover and the lesion to set for 4 days.
To test whether silicon probes were detectable with our method, we implanted a 32-channel silicon probe with a 10 mm shank (A1x32, NeuroNexus, Ann Arbor, MI) into posterior cortex and through hippocampus of the same animal used to test electrolytic lesions. As this was a proof of concept, we did not record from this electrode and severed it with a pair of scissors, leaving it inserted in the brain. However, the electrode remained in the brain for several days, simulating the conditions of chronic recording, before the animal was perfused and the brain was prepared for imaging.
We incubated the brains in the same 2% PFA and 2.5% GA solution in 1X PBS at 4 °C while shaking lightly at 50 RPM on an orbital shaker for 48-72 hours. We made sure there was at least 10 times the volume of the brain in solution to ensure adequate post-fixation (in practice, this meant 40-50 ml of solution in a 50 ml conical centrifuge tube placed horizontally on the shaker).
We tried several variations of this perfusion and post-fixation protocol in an effort to get the osmium to diffuse evenly and completely throughout the entire brain. We found that the combination of PFA and GA (as opposed to just PFA) was important for consistent full osmium penetration of the tissue. Though we did not test it explicitly, we hypothesize this is because PFA fixation is reversible 41 , whereas glutaraldehyde fixation is not 42,43 . Given the two week incubation in osmium (see Staining and Embedding), it is possible that the PFA in the interior of the brain diffused out and the tissue degraded during the course of the staining, preventing the osmium from preserving the interior structures. The pressure of the perfusion (whether high-pressure, peristaltic or gravity-based) did not seem to have an effect on the quality of the staining based on our piloting, so we chose to carry out high-pressure perfusions because they were faster.
A previous study comparing glutaraldehyde and PFA in preparations of rat cerebral cortex for EM found that glutaraldehyde fixation for 24 hours was sufficient to protect the tissue and make it osmotically non-reactive 42 . At the nano-scale our tissue looks considerably damaged compared to the study, which we predict is because we perfuse with fixative buffered in 1X PBS whereas the study perfuses with glutaraldehyde buffered in sodium cacodylate. Thus, we predict an improvement to the tissue quality at the nano-scale could be achieved by perfusing and post-fixing with fixative buffered in sodium cacodylate, followed by an incubation in aqueous osmium. However, as we have mentioned, for micro-CT scanning, the tissue is well-enough preserved as we outline here, where we prioritized the simplicity of the procedure.

Staining and Embedding.
In finding an appropriate staining and embedding protocol, we aimed to achieve full, even osmium penetration throughout the entire rat brain while ensuring the protocol was as simple as possible.
Because rat brains are much larger than mouse brains, we faced considerable difficulty in finding a staining protocol that would achieve even osmium penetration throughout the entire rat brain. Previously, researchers have demonstrated even osmium penetration in mouse brains using a relatively complex protocol meant to preserve ultra-structure for electron microscopy 11,12 .
After an adequate post-fixation period, we washed the brains 3-4 times in ddH 2 O to remove any fixative and PBS. We then placed the brains in 40-50 ml of aqueous 2% OsO 4 (#19190 EMS) in 50 ml conical centrifuge tubes. We sealed the tubes with Parafilm ® M (Bemis Company, Inc, Oshkosh, WI) and covered them completely in aluminum foil. We stored the brains at 4 °C shaking lightly at 50 RPM on an orbital shaker for two weeks ( Supplementary Fig. S2). Horizontal placement of the tube on the shaker seemed to offer better mixing than vertical placement and may have improved osmium infiltration.
We found that the use of aqueous osmium (as opposed to osmium in a buffer like sodium cacodylate) was important for full tissue penetration. After numerous samples processed with osmium buffered with sodium cacodylate, we found that even after 6 weeks of incubation the osmium did not penetrate fully and seemed to be encountering a diffusion barrier about 2 mm into the tissue (Supplementary Fig. S2). Osmium was first described as a metal that dyed organic compounds 44 , and was later found to mostly bind to lipids in cell membranes [45][46][47] . If, for instance, there is a layer of intact cell membranes that is saturated with bound osmium, it could prevent further osmium from traveling deeper into the tissue because there are no passages for effective diffusion. Thus, we hypothesize that water as a solvent (and not sodium cacodylate) acts like a light detergent and permeabilizes the cell membranes enough so that even if a layer of cell membranes is saturated with osmium, there still exist paths through which unreacted osmium can continue to travel deeper into the tissue. A previous study also encountered a diffusion barrier, although it was microns not millimeters into the sample, and they were able to attribute it to precipitation in the extra-cellular space 11 .
After two weeks, we washed the brain in ddH 2 O, dehydrated it with ethanol dilutions and transferred it to pure acetone to prepare for resin infiltration and embedding. We allowed the resin (Durcupan ™ ACM, #44610 Sigma-Aldrich, St. Louis, MO) to infiltrate the brain through resin/acetone dilutions and finally cured the brain  We reconstructed the samples (projections to z-stack) with CT Pro (Nikon Metrology Ltd., Tring, UK), the scanner software. We saved the data as z-stacks in TIFF format, making them easily readable by virtually any image processing software.
To annotate lesions, we created sub-volumes of the brains where the lesions were located and used a combination of the lasso and brush tools in Avizo to highlight lesioned areas. We used the fill holes and smoothing commands to regularize the edges and interiors of the masks. To illustrate the ability to annotate at different levels of detail, we annotated samples every 2 or every 8 virtual slices using different 2D views (e.g. coronal, sagittal). Once the entire lesions were outlined, we used the interpolation tool to generate full volumes. We calculated volumes by using the material statistics tool. We annotated the silicon probe and electrolytic lesion using the same methods in Avizo. In cases where we simply wanted to show different 2D views of the brain, we used VGStudio Max to generate coronal, sagittal and horizontal projections using the save image stack command.
Three-dimensional renderings of the brains were made with the volume rendering tool in Avizo and recorded with the snapshot tool. The 3D rendering of the brain in Fig. 5c was made in VGStudio Max by combining an image of the brain with low opacity and one with a high contrast threshold (excluding everything but the electrodes) in Photoshop to illustrate the electrode locations.
The brains typically only occupied a fraction of the image histogram, so to improve visualization we normalized (contrast-stretched) the pixel values by the boundaries of the darkest and lightest pixels present in the sample.
For our histological samples, we calculated lesion volumes by registering the sections to the closest-matching samples from an atlas 13 (sections will typically distort in size/shape after histological treatment), multiplying lesion area per section by the section thickness (80 μm) and adding up the volumes calculated for every section.
The single tetrode in the brain in Fig. 5a was at a slight angle to the coronal plane, so to better visualize it in the coronal view, we created a maximum intensity projection of the slices that contained the electrode using FIJI 48 .
Step  Fig. 3, we cut the brains in half and processed one half for micro-CT as outlined above, and one half for histology and light microscopy. We sectioned the brains into 80 μm sections using a vibratome. We mounted the sections onto slides and stained them with Cresyl-violet after serial ethanol dilutions. We imaged sections with an Axio Scan.Z1 (Zeiss, Oberkochen, Germany).
Electron Microscopy. After micro-CT imaging, we bisected a brain sample with a bandsaw and machined a 7 mm × 7 mm × 20 mm block of cortex from one hemisphere. We mounted the block onto the chuck of a Leica EM UC-7 Ultramicrotome (Leica Microsystems, Buffalo Grove, IL), trimmed down the machining damage with a diamond knife and reduced the face to a 1 mm × 2 mm rectangle with a 400 μm setback. We then collected 30 nm sections onto carbon-coated Kapton tape with an automated tape-collecting ultramicrotome (ATUM) 49 . The tape with the sections was mounted to silicon wafers and we then post-stained the sections with 1% uranyl acetate in maleate buffer and 3% stabilized lead citrate (Ultrostain II, Leica Biosystems, Wetzlar, Germany). We imaged the sections on a Zeiss Sigma scanning electron microscope and acquired images using secondary electron detection.  Table 2. Reagents for Small Whole-Brain Preparation for Micro-CT Scanning.