Correction to: Scientific Reports https://doi.org/10.1038/s41598-017-17391-1, published online 07 December 2017
The Acknowledgements section in this Article is incorrect.
“This work was undertaken at the University of Nottingham funded by the Engineering and Physical Sciences Research Council (EPSRC) through the grants EP/I033335/2 “EPSRC Centre for Innovative Manufacturing in Additive Manufacturing” and EP/N024818/1 “Formulation for 3D Printing”, and by the Air Force Office of Scientific Research (AFOSR) through award FA9550-14-1-0048. ES wants to acknowledge the EPSRC grant for the Kratos LiPPS XPS instrument EP/K005138/1.”
should read:
“This work was supported by the Engineering and Physical Sciences Research Council [grant number EP/I033335/2, EP/N024818/1, EP/K005138/1]; the Air Force Office of Scientific Research (AFOSR) [grant number FA9550-14-1-0048].”
Author information
Authors and Affiliations
Corresponding authors
Additional information
The original article can be found online at https://doi.org/10.1038/s41598-017-17391-1.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Hu, Q., Sun, XZ., Parmenter, C.D.J. et al. Author Correction: Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction. Sci Rep 8, 3512 (2018). https://doi.org/10.1038/s41598-018-21513-8
Published:
DOI: https://doi.org/10.1038/s41598-018-21513-8
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
