Cholesterol oxidase catalyzes the oxidation and isomerization of the cholestane substrates leading to the addition of a hydroxyl group at the C3 position. Rational engineering of the cholesterol oxidase from Pimelobacter simplex (PsChO) was performed. Mutagenesis of V64 and F70 improved the catalytic activities toward cholestane substrates. Molecular dynamics simulations, together with structure-activity relationship analysis, revealed that both V64C and F70V increased the binding free energy between PsChO mutants and cholesterol. F70V and V64C mutations might cause the movement of loops L56-P77, K45-P49 and L350-E354 at active site. They enlarged the substrate-binding cavity and relieved the steric interference with substrates facilitating recognition of C17 hydrophobic substrates with long side chain substrates.
Cholesterol is the precursor of the five major classes of steroid hormones: glucocorticoids, mineralocorticoids, androgens, estrogens, and progestogens, which mediate a wide variety of developmental and physiological events in multicellular organisms1,2,3. It is also a frequently determined analyte in clinical analysis, diagnosis and prevention of many clinical disorders4. On the other hand, cholesterol could be used by mycobacteria as carbon and energy source to transform sterols into highly valuable sterol drug intermediates5. For instance, 4-cholesten-3-one, as cholesterol metabolite and analog, could be a potential candidate for anti-metastasis of lung adenocarcinoma6.
Cholesterol oxidase (ChO, EC 18.104.22.168), a bifunctional oxidase flavoprotein, catalyzes the dehydrogenation and the isomerization of the hydroxyl group at C3 position (C3-OH) of a cholestane system to yield the corresponding carbonyl product7. It plays a critical role in sterol catabolism by converting 3β-hydroxy steroids to 3-oxo-4-ene steroids8. In addition, ChO can be used for biosynthesis of steroid hormones and other pharmaceutical steroids9,10. This enzyme is also known as a virulence factor in pathogenic species, i.e., Mycobacterium sp.11 and Rhodococcus equi 12. ChO has emerged as a useful biotechnological tool employed for the determination of serum and food cholesterol levels13. Protein engineering provides a rigorous strategy and allows the creation of novel enzymes for biotechnological applications14,15. Rational design based on structure and function relationships has achieved significant success for improving enzymatic performance16,17. For instance, Toyama and co-workers introduced amino acid substitutions into Streptomyces cholesterol oxidase using site-directed mutagenesis and structural comparisons to investigate substrate specificity and affinity18. A mutant of Q145E substitution from R. equi enzyme showed improved thermal stability19. Brevibacterium sp. cholesterol oxidase was engineered to improve the thermal stability and activity based on the structural analysis, whereas Q153E/F128L mutant showed superior thermal stability and enzymatic activity than wild type enzyme20. The rational design of cholesterol oxidase (ChO) variants for its potential industrial application as an enzyme electrode for measuring total serum cholesterol is challenging.
Cholesterol oxidases from various microorganisms have been subjected to protein engineering and considerable attention is devoted to cholesterol oxidase for its biotechnological applications. Recently, Pimelobacter simplex (also called Arthrobacter simplex) is widely used in the steroids transformation for its high tolerance to organic solvents21, and a novel putative cholesterol oxidase gene from Pimelobacter simplex, PsChO, was identified22. PsChO is a novel flavin-dependent enzyme that catalyzes the dehydrogenation at C3-position of cholestane skeleton substrates (Figs 1 and S1). However, enzymatic activity and substrate selectivity remain poorly understood, and this has hampered its application toward industrial catalyst. Therefore, successful rational design of functional PsChO would greatly advance our understanding of this family of enzymes. Moreover, insight into substrate selectivity of PsChO can be achieved by structural comparison of the wild-type (WT) and mutants using molecular simulations (MD). To obtain an enzyme with higher catalytic activity, molecular modeling combined with mutagenesis and biological assays were used to obtain a PsChO mutant with better substrate specificity and activity.
Results and Discussion
Structural analysis of PsChO
We generated a structural homology model of PsChO using Brevibacterium sterolicum cholesterol oxidase as template (PDB ID: 1COY, sequence identity 66%, root-mean-square deviation (RMSD), 0.06 Å; 488 aligned Cα atoms)23, which possessed the characteristic nucleotide-binding fold (Rossmann fold) consisting of a β-pleated sheet sandwiched between α-helices (Fig. 2A). A loop region (L56-P77), which is located at the entrance of the active-site cavity, forms a flexible lid23,24. This flexible loop is presumed to open and allow the substrate to enter the binding site and then close to seal steroid from the solvent25,26. The substrate-binding domain shows a variety of different topologies in ChO family (Figs S2 and S3). PsChO contains a topologically equivalent FAD binding domain24,25, in which partially conserved residues E28, M29, L83, R97, N106, G107, M109, M205, H235, V237, A276, Y430, F471 and G459 may form hydrogen bonds or hydrophobic interactions with the cofactor FAD (Fig. 2B). The internal cavity is occupied by a lattice of nonconserved hydrophobic residues: V46, P63, V64, F70, T329, P331, L360 and Y430 (Fig. 2C). The substrate is buried within this cavity and these residues are predicted to interact with the substrate. A narrow-gated oxygen channel, which is composed of M109, V111, V178, P179, G334, F344 and V468, plays an important role in oxygen entry to the active site from the surface during flavin reoxidation (Fig. 2D).
Characteristics of the active site
The active site is located under the isoalloxazine of FAD for the noncovalent form in ChO family enzymes7. Three residues, H431, E346 and N469, form a catalytic triad (Fig. 3). Residue H431 acts as the general base catalyst for abstraction of a proton from the C3-OH of the steroid substrate during oxidation and, subsequently, as the general acid for stabilization of the dienolic intermediate of isomerization23. E346 is positioned in close proximity to the C4 β-proton of the steroid. E346 acts as the base for both catalytic reactions to transfer a proton and the isomerization step13. N469 affects the oxidative activity and modulates the redox potential of the flavin through interaction between its side chain and the ring of FAD26. A single water molecule at the active site forms a network of hydrogen bonds between the catalytic residues H431, E346, N469 and the C3-OH of the substrate. This active water molecular acts as the keystone for the active site27,28.
Enzyme characteristics of PsChO
The catalytic activity of ChO is highly dependent on the buffer composition, pH, temperature and surfactant used to solubilize the substrate; a comparison and discussion of these parameters were performed. The purified WT PsChO was active at pH 5.5–9.0 and maximal activity was observed in PBS buffer pH 7.5. The PsChO exhibited good pH stability over the pH range of 5.0–9.0 and more than 75% of the maximal activity was retained over this range (Fig. 4A). The optimal temperature for PsChO activity was 25 °C. The activity began to decrease when the temperature was >40 °C, and there was only 25% residual activity after pre-incubation at 50 °C for 30 minutes (Fig. 4B). Cholesterol oxidase catalyzed substrates in organic solvents and detergents using hydrophobic interactions due to the negligible solubility of cholestane skeleton substrates in buffers. The catalytic activity of PsChO in various micelles varied, but all micelle solutions reduced enzyme activity (Fig. 4C).
PsChO exhibited a broad range of selectivity toward various cholestane skeleton substrates, especially the 3β-hydroxysteroids (Fig. 5). However, PsChO showed almost no activity toward 3α-hydroxysteroid (cholic acid), because His431 might not abstract a proton from the 3α-O of cholic acid (Fig. S4). The highest enzyme activity was observed using cholesterol as the substrate (12.7 U mg−1), and the products of cholestane skeleton substrates, such as cholest-4-en-3-one, β-sitostenone, stigmastadienone, progesterone, ergosta-4,7,22-trien-3-one and androstenedione were characterized by GC-MS (Fig. S5).
Structure-based rational design of PsChO
To identify the role of specific amino acids in substrate selectivity and structure-function relationships, a single point mutant library containing only 39 single mutants at 17 residues was constructed and evaluated (Figs 5 and S6). Mutation of residues V46, P63, M109, M205, L360, P331, F344, and Y430 reduced activity, indicating that these residues play a crucial role in substrate recognition. Interestingly, P63 and P432 mutants were inactive toward cholesterol. Mutation of V64 and F70 improved the catalytic activity toward cholesterol (Fig. S6). Therefore, these two sites were selected as targets for rational design.
Proteins are dynamic and undergo conformational changes to bind ligands, which makes protein modification a major challenge in structure-based rational design. In order to increase enzyme activity, we performed rational design beginning with site-directed mutagenesis guided by the structural homology model of PsChO. The mutants V64L, V64I, V64C, F70V and F70A showed improved activities toward cholestane skeleton substrates. These mutants also showed higher k cat/K m values toward cholesterol when compared with the k cat/K m value of the WT protein (Table S2). The F70L mutant showed almost the same level of activity as the WT, which suggests that the leucine side chain did not effectively enlarge the binding pocket to reduce the steric hindrance with the substrate. Surprisingly, mutants V64C and F70V showed 50% higher activities toward cholesterol when compared with that of the WT enzyme. Furthermore, these two mutants, together with V64L/I and F70A also improved the activity toward β-sitosterol, dehydroepiandrosterone, pregnenolone and stigmasterol (Figs 5, S7 and Table 1). Unexpectedly, the F70 mutants improved catalytic activity >10-fold toward ergosterol and stigmasterol when compared with the results of the WT enzyme (Fig. S8).
The Michaelis–Menten constant (K m) and the catalytic rate constant (k cat) of PsChO toward cholesterol were determined to investigate the substrate selectivity. The k cat/K m of WT for cholesterol (0.06 μM−1 s−1) was higher than other substrates, which implied that PsChO possessed strong catalytic activity towards the C17 hydrophobic substrate with a long side chain when compared with the activity toward smaller substrates (i.e. dehydroepiandrosterone and pregnenolone). However, the F70V mutant had a more than two-fold increased k cat/K m toward cholesterol, β-sitosterol, dehydroepiandrosterone and pregnenolone when compared with the results for the WT enzyme. A similar increased in activity was also observed for the V64C mutant.
Molecular dynamic simulations
Molecular dynamic simulations were performed to investigate the binding free energy of PsChO WT and mutants with cholesterol. The results showed that the binding energies of PsChO mutants with cholesterol were increased compared with that of WT (>−104 kcal/mol vs −96.83 kcal/mol) (Table 2). Notably, the V64C mutant contributed the highest affinity toward cholesterol. Thus, the PsChO mutants exhibited higher substrate affinity than the WT enzymes. To determine the stability of PsChO/mutants–cholesterol complexes, RMSD and root mean square fluctuations (RMSF) of the whole system over 50-ns are shown in Fig. 6. Some residues in loops of K45-P49, A62-F70 and T352-I354, which are part of the substrate binding sites showed a greater degree of flexibility with RMSFs of >0.2 nm when compared with that of the WT enzyme, indicating that these residues are more flexible as a result of binding to ligands.
Structural comparison of PsChO wild type and mutants
A structural comparison between PsChO and family members reveals a structural change to residues L56-P77 (Figs 2C, S2 and S3), where the side chains of V64 and F70 located in the lid loop project into the active-site cavity, regulating the entrance on protein surface (Fig. 2C). We compared the equilibrated 3D structures from 50 ns of MD trajectory for WT PsChO and mutants to obtain further insights into protein conformational changes associated with substrate binding. The features of the structural and functional analyses are supported by the MD simulations in which V64 and F70 within the loop have moved upon substrate binding, resulting in an enlargement of the steroid-binding cavity. The movement of the lid loop (L56-P77) including the side-chain of V64 and F70 facilitates the accommodation of the hydrophobic tail moiety of long C17 side-chain substrates (Figs 6 and 7 and S9). These results also suggest that the mutations cause movement of two other loops (K45-P49 and L350-E354), which are located near the substrate cholesterol and interacted with the tail moiety of cholesterol. Therefore, F70V and V64C appear to relieve the steric interference with substrates by forming a sufficiently large space to accommodate larger substrates in the active site.
We have characterized PsChO, showing that this enzyme exhibits pH stability over the range of 5.0–9.0 and is thermostable to 40 °C. PsChO catalyzes 3β-hydroxysteroids, i.e. cholesterol, β-sitosterol and pregnenolone. Residues related to substrate recognition around the active site were investigated and mutants of V64 and F70 improved the substrate selectivity and activity. Consistent with structural data, the MD simulations showed that PsChO mutants increased the binding free energy when compared with that of the WT. Furthermore, the lid loop of L56-P77, including V64 and F70, regulated substrate entry. The substrate selectivity of PsChO was significantly improved toward various cholestane skeleton substrates based on rational design and protein engineering technologies.
Materials and Methods
Cloning, expression and purification
The E. coli BL21(DE3) cells harboring pET28a(+) with the wild-type PsChO gene (GenBank No. CP009896.1; Protein ID: WP_052138420.1) were grown at 37 °C in lysogeny broth medium containing 40 μg/mL kanamycin. Overexpression was induced by adding 0.1 mM isopropyl-β-D-thiogalactopyranoside (IPTG) when OD600 reached 0.6–0.8. The culture was then further incubated at 16 °C overnight. After harvesting, the cells were disrupted by sonication in the resuspending buffer [20 mM Tris-HCl (pH 7.4), 20 mM imidazole, and 0.5 M NaCl], and the cell debris was removed by centrifugation. PsChO was trapped on Ni-NTA Superflow resin (QIAGEN). After washing, the His6-tagged protein was eluted with resuspension buffer containing 400 mM imidazole. The solution containing purified PsChO was dialyzed against PBS buffer for activity assay. The PsChO concentration was measured by the method of BCA.
The activity of cholesterol oxidase was measured using the following protocol10. The purified enzyme was added to 3 mL solution A containing 25 mM phosphate buffer (pH 7.5), 1 mM 4-aminoantipyrine, 6 mM phenol, 7000 U L−1 peroxidase and solution B containing 150 μL isopropanol with 0.83% (w/v) cholesterol and 4.26% (v/v) Triton X-100. The reaction was proceeded for 5 min and was terminated by placing the reaction mixture in boiling water. The concentration of H2O2 was calculated by the increase in the OD500 value. One units of enzyme is defined as the amount of enzyme to catalyze 1 μM cholesterol in one minute.
Characterization of PsChO
The optimal pH of the purified enzyme was determined in the following buffers: 25 mM MES buffer (pH 5.5–6.5), 25 mM PBS buffer (pH 6.0–8.0), 25 mM HEPES buffer (pH 7.0–8.0), 25 mM Tris-HCl buffer (pH 7.0–9.0) and 25 mM glycine-NaOH buffer (pH 8.5–9.0) at 25 °C for 5 min. The effect of pH on PsChO stability was determined by incubating the purified enzymes under various pH conditions (pH 5.0–9.0) for 1 h at 4 °C. The buffers (25 mM each) used were: pH 5.0–6.0, MES; pH 7.0–8.0, PBS; pH 9.0, Tris-HCl. Residual enzyme activity was then measured. The optimal temperature was determined by incubating PsChO at different temperatures ranging from 20 to 60 °C. The thermostability was determined by measuring the residual activity after the incubation of the enzyme at different temperatures (20–70 °C) for 30 min in PBS buffer (pH 7.5). The effects of organic solvents (33% v/v, ethanol, isopropanol, ethyl acetate, DMSO, trichloromethane, acetone and methanol) and detergents (0.5% w/v, SDS, D-sorbitol; 0.5% v/v Tween80, Tween20 and Triton X-100) to the activity of the protein was determined by measuring the residual activity after incubation of the enzyme at 4 °C for 1 h in the various organic solvents and detergents. The activity was then measured under standard reaction conditions.
GC-MS analysis of products of the cholestane skeleton substrates
The products of cholestane skeleton substrates, such as cholest-4-en-3-one, β-sitostenone, stigmastadienone, progesterone, ergosta-4,7,22-trien-3-one and androstenedione were resuspended in 20 μL n-hexane and a 1-μL aliquot analyzed by GC-MS (VARIAN 4000 GC/MS) using an ultraviolet detector (Agilent 1260 Infinity, USA) at 240 nm and a HP-5 ms (30 m × 0.25 mm × 0.25 mm, Agilent Technologies) column in electron ionization (70 eV) mode. Initial oven temperature was 150 °C, held for 3 min, then increased to 300 °C at the rate of 5 °C/min and then held for 10 min. Helium was used as a carrier gas at a flow rate of 1 ml/min. Temperatures of injection port, interface and ion source were 280 °C, 250 °C and 200 °C, respectively.
Structure modeling of the PsChO
The three-dimensional (3D) homology model of PsChO was generated using Modeller 9.929. The crystal structure of cholesterol oxidase from Brevibacterium sterolicum (PDB ID: 1COY, 1.8 Å), which has 66% sequence identity to the target protein PsChO, was chosen as the template. The align2d command was used to automatically generate a sequence alignment between the template and PsChO. Subsequently, homology modeling was performed by the automodel command. Thereafter, each model was first optimized by the variable target function method with conjugate gradients. Simulated annealing MD simulations were used to refine the structure. Finally, the best model was chosen based on the values of the Modeller objective function and the DOPE assessment scores. The PyMol molecular Graphics System (http://www.pymol.org)30 was used to visualize and analyze the generated model structure.
Molecular dynamics simulations
The initial structure of cholesterol was built by Chemoffice software. The GROMOS96 53a6 force-field parameters of cholesterol were sourced from the Automated Topology Builder and Repository 2.0 webserver (https://atb.uq.edu.au/)31. Subsequently, the atomic charges and charge groups of brazilin were corrected to achieve better agreement with the GROMOS96 53A6 force field parameter set32.
The cholesterol and the target protein PsChO complex were initially placed into a square box with a size of 7 nm. Water molecules were then added into the box and three water molecules were replaced by the same number of negative Cl− ions. The simple point charge (SPC) model was used to describe water. We first performed 1000 energy minimization steps to relax the simulation system, after which the relaxed system was equilibrated for 40 ps by successively using an isochoric-isothermal ensemble and an isothermal-isobaric ensemble, via the Berendsen weak coupling method33. Finally, the product MD simulations of 10 ns under different initial conditions were carried out by assigning different initial velocities to each atom of the simulation system. All of the MD simulations were performed close to physiological temperature (i.e., 300 K) and a pressure of 1 bar.
We performed all-atom MD simulations using the GROMACS 5.1.1 package34 together with the GROMOS96 53A6 force field. Newton’s classical equations of motion were integrated using the Verlet Leapfrog algorithm with a 2 fs time step35. All short-range non-bonded interactions were cut off at 1.4 nm, with dispersion correction applied to energy and pressure terms to account for the truncation of van der Waals interactions. Long-range electrostatic interactions were calculated with the smooth particle mesh Ewald method36 via cubic-spline interpolation with a Fourier grid spacing of approximately 0.12 nm. The neighbor list was updated every five simulation steps. All bond lengths were constrained using the LINCS algorithm37 with a relative geometric tolerance of 10−4. Initial velocities were assigned according to a Maxwell distribution. The atomic coordinates were saved every 50 ps for subsequent analyses. The snapshots were made using PyMol version 0.99rc630. The free energies between cholesterol and the target protein were calculated using g_mmpbsa software38.
Site-directed mutagenesis of PsChO was performed by PCR with the QuikChange method on a template consisting of the DNA encoding PsChO inserted into pET28a(+) vector. The primers for mutants are summarized in Table S1. The mutations were confirmed by DNA sequencing. PsChO mutants were expressed and purified according to the method described for wild-type PsChO.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
This work was supported by National Key R&D Program of China (2017YF0400304), National Natural Science Foundation of China (31771911), Natural Science Foundation of Tianjin (16JCQNJC09200) and the Overseas High-level Talents Program of Tianjin University of Science and Technology to H.-M. Qin, China.