The human protease family HtrA is responsible for preventing protein misfolding and mislocalization, and a key player in several cellular processes. Among these, HtrA1 is implicated in several cancers, cerebrovascular disease and age-related macular degeneration. Currently, HtrA1 activation is not fully characterized and relevant for drug-targeting this protease. Our work provides a mechanistic step-by-step description of HtrA1 activation and regulation. We report that the HtrA1 trimer is regulated by an allosteric mechanism by which monomers relay the activation signal to each other, in a PDZ-domain independent fashion. Notably, we show that inhibitor binding is precluded if HtrA1 monomers cannot communicate with each other. Our study establishes how HtrA1 trimerization plays a fundamental role in proteolytic activity. Moreover, it offers a structural explanation for HtrA1-defective pathologies as well as mechanistic insights into the degradation of complex extracellular fibrils such as tubulin, amyloid beta and tau that belong to the repertoire of HtrA1.
The high-temperature requirement A (HtrA) family of serine proteases prevent cellular malfunction arising from protein misfolding and mislocalization1,2. Human HtrA1 is responsible for the cleavage of substrates such as the tau protein and tubulin3,4. HtrA1 up- or down-regulation have been associated with important pathological processes. For example, a polymorphism in the promoter sequence of the HtrA1 gene results in an abnormal increase in HtrA1 protease levels, linked to age-related macular degeneration (AMD)5. Diseases such as the Cerebral Arteriopathy, Autosomal Recessive with Subcortical Infarcts and Leukoencephaolopathy (CARASIL) syndrome and the cerebral small vessels disease (CSVD) are caused by mutations or deletions that impair HtrA1 function6,7. HtrA1 also plays a role in tumor suppression8. While it stands as a promising pharmaceutical target, HtrA1 activation and regulation are not fully understood.
In solution, HtrA1 is most abundant as a trimer. Each monomer is composed of four different domains: a trypsin-like catalytic domain, a C-terminal PDZ domain, an IGFBP-like domain and Kazal-like domain9. In some bacterial homologs such as DegP, it has been found that the interaction between the catalytic and the PDZ domains orchestrates activation by driving conformational change across the monomers of the oligomeric forms, upon binding of unassembled outer-membrane proteins (OMPs) accumulated in the periplasm10,11. However, stripping the PDZ domain from HtrA1 and other bacterial homologs such as DegS, still produce proteins with similar in vitro proteolytic activity to the full-length versions. Recently, de Regt et al.11 have proposed an elegant mechanism for DegS activation in which the PDZ domain would be inhibiting the process until a signal in the form of peptide binding is received. In the case of HtrA1, structural evidence in the form of Small-angle X-ray Scattering (SAXS) models seem to indicate that the PDZ domains in the trimeric form are not found in direct contact with the catalytic domains9. In addition, experiments with polymeric proteins4 have shown that the PDZ domain, although dispensable for proteolysis of small peptides, is still essential to correctly process more complex substrates. Taken together, this information indicates that human HtrA1 might undertake a similar activation process to other members of the family12, but in which the role of the PDZ domain would not be pivotal.
Molecular dynamics (MD) simulations have been successfully applied to characterize molecular states leading to conformational change13,14,15. We combined this tool with community analysis16 to identify allosteric regions and to investigate the mechanisms leading to HtrA1 activation both at the monomer level and globally for the trimer.
Our aim is to understand the structural and dynamic mechanisms leading to HtrA1 activation, relevant for the development of new therapeutic strategies. We find that allostery is a driver of human HtrA1 regulation and explain how the proteolytic activation in human HtrA1 is achieved independently of the PDZ domain, mediated by inter-monomer communication. Combining computational and experimental evidence from an AMD disease relevant model developed in Retinal Pigment Epithelium (RPE cells), we elucidate how an allosteric signal, transmitted throughout the amino acid network, could promote HtrA1 catalytic activity. Our study provides structural explanation for HtrA1-related pathologies such as CARASIL and CSVD, and explains why trimeric architecture is critical to HtrA1 function.
HtrA1 monomer is activated by a gating mechanism
Molecular dynamics simulations of static X-ray structures were used to generate hypotheses on the intermediate conformational states leading to HtrA1 activation, which we later validated in vitro with site-directed mutagenesis.
Starting from the fully active and fully inactive HtrA1 catalytic domain conformations, a five-state hidden Markov model has been constructed making use of extensive MD conformational sampling to investigate the cascade of events leading from the inactive to the active conformations.
The protein flows through several intermediates in which the catalytic triad (Ser 328, His220 and Asp250), the L2 loop residues Leu345 and Lys346, the LD loop and the L3 loop (residues 298–307) suffer a major rearrangement to produce an active conformation (see Fig. 1 for a detailed description). Hydrophobic Leu345 stands obstructing the entrance of the substrate to the binding pocket. The dynamics of the L2 loop, and particularly Lys346 are key to initiate the conformational transition to remove Leu345.
We propose a model of lock-and-gate activation by which the dynamics of the L2 loop, and particularly Lys346 (lock), would be key to initiate the transition by forcing a conformational change on Leu345, which acts as a hydrophobic gate obstructing the entrance of the substrate to the binding pocket in the inactive conformation. A similar mechanism, with tryptophan residues, has been described in other members of the trypsin-like serine protease family17.
The withdrawal of the Leu345 side chain from the S1 pocket into the solvent seems thermodynamically unfavourable, and therefore unlikely to happen unless a protein conformational change facilitates the process. On the other hand, the positively charged residue Lys346 is found exposed to the solvent, at different degrees, in both the active and inactive states. Our simulations suggest that the flexibility and dynamics of this side chain could potentially trigger the flip of the L2 loop that unblocks the S1 site facilitating the transition towards the active conformation.
To test this hypothesis, we first determined the kinetic parameters for the wild-type protein and then we simulated and subsequently expressed the variants L345G and K346I for biochemical enzymatic characterization (Table 1). Importantly, the assayed wild-type catalytic efficiency (Table 1) is in line with other serine proteases (Hedstrom, 2002), which suggests a low-energy barrier leading to HtrA1 substrate-driven activation.
Mutation K346I was designed to reduce the flexibility of Lys346 by replacing the positively charged side chain with a more conformationally restrained residue of similar size, while preserving the hydrophobicity of the 4-carbon-atom chain of the aminobutyryl group of lysine. Simulations of the K346I variant showed a very stable L2 loop, but with a looser oxyanion-forming (residues 325–327) loop due to the missing interactions of the original lysine residue. To further investigate the role of this mutation, we established a sensitive enzymatic assay for the variant using the fluorescence-quenched peptide substrate H2-Opt -previously reported as an excellent substrate for both HtrA1 and HTRA29 (Methods). The biochemical characterization of K346I reported a 10-fold decrease in Kcat (Table 1), consistent with the proposed dynamic character of this residue and its role as initiator of the activation mechanism.
With the L345G variant, we aimed to eliminate the side chain that blocks the active site hoping to obtain an increase in activity. However, glycine substitutions are known to increase loop flexibility by removing steric interference18. Simulations with the glycine variant predicted an enzyme with a large increase in L2 loop flexibility that could potentially interfere with catalysis by perturbing the configuration of the substrate and the catalytic triad. Accordingly, this variant has greatly impaired catalytic activity (10-fold decrease in Kcat, Table 1), highlighting the essential role of this residue (both size and dynamics) in the activity and regulation of the protease.
Sequence analysis of HtrA1 in the context of a subset of HtrA family proteins, revealed that the lysine residue seems to be predominant at position 346 (42.5% conservation), while other hydrophobic amino acids are also found at position 345 such as alanine or methionine, in agreement with our results. (See sequence analysis in Supp. Information).
Allosteric activation of HtrA1 trimer
We used molecular dynamics simulations to identify concerted motions in HtrA1 that could possibly lead to the activation process. Importantly, the pattern and distribution of dynamic groups varies between the fully inactive and fully active trimeric HtrA1. In particular, the presence of inter-monomer communities in the active trimer suggests long-distance allosteric coupling between monomers associated with activation (Fig. 2). Next, we validated our hypothesis of allosteric activation with an in vitro catalytic assay and investigated its implications for inhibitor binding using surface-plasmon resonance (SPR). A similar community analysis was undertaken for the HtrA1 monomer (Supp. Info.).
HtrA1 trimer dynamic communities
Taken globally, the inactive trimer presents the simplest distribution with almost identical communities in each monomer: two dynamic intra-monomer halves which do not involve inter-monomeric elements, and a third community formed by loop LA (residues 190 to 200) consistent with the inherent flexibility of this region (Fig. 2c).
The active trimer, on the other hand, shows a more complex picture. All three monomers also present a basic scheme of two dynamic halves each and a flexible community with the LA loop. However, new dynamic communities arise as specific to the active trimer (Fig. 2b and Supp. Figure S3). Notably, loop L3 (Ser298 to Leu307) appears either independently or coupled to the LD loop located on top of the oxyanion hole of the next monomer (Fig. 2a). This dynamic unit bridges adjacent monomers, indicating that in the active form, amino acids in loops L3 and LD from different monomers have correlated motions. Remarkably, the fully inactive trimer does not include such inter-monomer regions.
Allosteric activation mechanism
The previous community analysis leads to the hypothesis of an activation mechanism that involves two contiguous monomers. Mechanistically, amino acid side chains in the loop L3 -especially the well-conserved Arg302- would play an essential role in HtrA1 activity by interacting with the backbone of the residues Gln289 and Thr291 located at the LD loop of the next monomer. In turn, the LD loop would subsequently interact with the oxyanion forming loop and the catalytic residues, promoting activation. To verify this idea, we first addressed the L3 loop by engineering two variants to disturb the hypothetical allosteric network. Mutation R302A was selected to abolish a possible signal communication between L3 and LD loops, while the double mutant E306A/R310A was designed to substantially modify the L3 loop dynamics, by removing charged residues, without affecting substrate binding. As a proof of concept, first we generated a model for the variant R302A. As expected, the simulation of this variant displayed a loss of the inter-monomeric communities similar to that of the inactive trimer (Fig. 2d).
In vitro catalytic assays
Following our computational hypothesis, to assess whether inter-monomer communication mediated by the L3 and LD loops is indeed relevant for HtrA1 activity, we measured the catalytic activity of the R302A and E306A/R310A HtrA1 variants in vitro (Table 1). As expected from the simulation, R302A presented no catalytic activity while E306A/R310A presented a 2-fold drop in Kcat. These results confirm that, first, the Arg302 mediated inter-monomeric communication is essential for activity, and second, other mutations in the L3 loop are not detrimental enough to abolish the activation of the protease (as shown by the catalytic assay).
Substrate binding measured with SPR
To investigate the role of the substrate in the activation mechanism and to investigate the effects of R302A on substrate binding, we employed SPR and the peptide-like boronic acid inhibitor DPMFKL-boro-V, which is known to bind to HtrA1 with high affinity19. As can be seen in Fig. 3a, S328A (inactive control) and R302A variants show a total loss of binding as compared with the wild-type enzyme. This result is compatible with the idea of a stable protease population of inactive conformations, where the Leu345 residue side chain blocks the S1 site20. Upon binding of a substrate to an intermediate conformation, if available, the active state would be stabilized, thus assisting in the activation of the remaining trimer units. Consistently, previous studies have already suggested a possible conformational selection mechanism for HtrA19,20, our evidence now expands this concept to full trimer activation. In this context, in presence of the substrate, the inter-monomer flow of the activation signal is required to stabilize the intermediate active-like conformations that may coexist with the fully inactive trimeric state, as the biochemical experiments with the L3 loop variants (R302A, E306A/R310A) and our simulations suggest.
To discard any possible structural disarrangement of the protein due to the introduced mutation that could account for the lack of binding and proteolytic activity, we verified by native mass spectrometry (MS) that the mutation R302A does not affect the ratio of monomer/trimer populations. Figure 3b shows native MS peaks for constructs wild-type, R302A and the catalytically inactive S328A (negative control) at high and low backing pressure and different collision energies. At high backing pressure, mostly trimer was observed for all constructs, with similar ratios r trimer/monomer (WT r = ~6/2 = ~3, R302A r = ~8/3 = ~2.7, and S328A r = ~20/5 = ~4.4). At increasing collision energy and/or lower backing pressure, a decrease in trimeric species is observed in all instances. The rate of decrease in ratio with either backing pressure or collision energy is similar in all cases (For panel C, Δr = 0.66 WT, Δr = 0.76 R302, Δr = 0.6), indicating that for the mutant R302A, the trimeric species is comparatively stable as the wild type and the negative control S328A (Fig. 3b, Figure S6).
Conformational space of the L3 loop
Given the importance of the L3 loop for the enzymatic activity and substrate binding in vitro, we further characterized the conformational space of this region using MD simulations. We analysed the trajectories of the segment spanning residues 298–310 in the active, inactive and intermediate conformations. We found three groups of residues to be strongly involved in the transition between the ordered L3 active conformation and the disordered states in the inactive and the intermediate conformations (Supp. Figure S7): i) Arg302, Glu306, Gln318; ii) Leu307, Phe353 and Ile351; and iii) Lys305 and Arg310. The first group contains the residue Arg302 which has been found in this work to be essential to transmit the signal to other monomers in the trimer. Residues Glu306 and Gln318 interact with Arg302, essentially locking its position in the active conformation. The second group will be accountable for signalling activation towards the L2 loop and the third group would facilitate L3 flexibility. Previous mutagenesis work on this loop in bacterial DegS by De Regt et al.11,20 are consistent with our simulations. Further details regarding this analysis can be found in Supp. Info.
Role of the LD loop in disease
Having established that perturbations in the L3 loop affect both activity and substrate binding in vitro, we sought to understand the role of the interfacial LD loop, the L3 loop binding partner, by focusing on naturally-occurring mutations in patients with syndromes linked to HtrA1 dysfunction. Chen et al.21 described the clinical phenotype of a CARASIL patient carrying the mutation P285L (LD loop), producing an impaired HtrA1 protease. Similarly, Verdura et al.6 identified disease-causing heterozygous mutations S284R, P285Q and F286V in CSVD patients, which produce HtrA1 proteins with residual or decreased catalytic, as measured in an in vitro enzymatic assay of the conditioned supernatants from transfected HEK 293 T cells6. Still, how heterozygous mutations far from the active site could have such deleterious effect is an open question in that study.
According to the crystallographic evidence, the LD loop is found forming a small helix in the active conformation, while it is disordered in the inactive one. In the helical conformation, the LD loop would be able to interact with the L3 loop of the previous monomer, and with the oxyanion forming loop, promoting a productive arrangement and hence, directly enabling catalysis.
Based on this hypothesis, we ran molecular dynamic simulations for the wild-type and several CSVD-variants to measure the propensity of helicity of the LD loop residues. The results show that the wild-type LD loop is predominantly (95%) helical in the active form (Supp. Table S4, Methods) while all CSVD-related variants present a significant loss of helical propensity (26–65%). Our simulated model of the variant with disease-causing mutations, therefore, reveals that these mutations affect the secondary structure of the loop LD, disturbing intermonomer communication and precluding activity in complexes which may combine mutant and wild-type HtrA1 forms.
Significance of inter-monomer allosteric activation in a cellular context
Finally, we assessed the relevance of our findings in a cellular context by overexpressing the full length HtrA1 wild-type and variants, including the PDZ and N-terminal domains in RPE cells. RPE cells are known to overexpress HtrA1 under the pathological condition of AMD, and thus are well-established models for the study of AMD and currently being used in clinical trials22. RPE cells were infected by adenoviruses containing the wild-type HtrA1 and the variants S328A (catalytically inactive), R302A and the single mutant R310A.
Western blot analysis of the RPE cell lysates revealed a minor band at 47 kDa, below the intact 54 kDa monomer band, for the wild-type HtrA1 and R310A-carrying vectors (Fig. 4a), that agrees with a previously reported self-cleavage band23. Instead, the isolating mutation R302A prevents intracellular self-cleavage of the full-length HtrA1 similarly to the negative control S328A, noted by the absence of the corresponding bands (Fig. 4a,b).
To confirm the inactivity of the R302A variant, we characterized in vitro the protein present in the cell supernatant by using an enzymatic assay. Proteolytic activity of the cell supernatant confirms that the enzymatic activity of the variant R302A is also comparable to that of the negative control (Fig. 4c). Thus, the R302A mutation has an inhibiting effect but does not impair the secretion of HtrA1 to the extracellular matrix.
On the other hand, the R310A single mutant variant remains similarly active to the wild-type HtrA1 construct, as opposed to the loss of activity shown by the double mutant E306A/R310A in our in vitro biochemical experiments. This suggests that, despite it is located in the L3 loop, R310A alone is not sufficient to perturb the inter monomer communication and prevent activity.
Previous studies have demonstrated that HtrA1 is secreted into the extracellular space to digest several extracellular proteins including clusterin24. We investigate whether allosteric activation is relevant in the context of HtrA1 extracellular activity. We carry out this analysis by monitoring HtrA1-dependent clusterin cleavage based on a novel cleavage site EQL362-NEQ identified with differential N-terminomic analysis of the secretome of RPE cells. A targeted proteomics assay (selective reaction monitoring, SRM) was developed to quantify the semi-tryptic peptide NEQFNWVSR, which is generated through cleavage of clusterin at EQL362-NEQ by a cellular protease, postulated to be HtrA1. We established and validated the link between the levels of the cleaved clusterin peptide and HtrA1 activity (Supp. Info).
To characterize HtrA1 activity of our mutants we compared the levels of the cleaved clusterin peptide (Fig. 4). As expected, the R302A variant presented a similar profile to the negative control S328A: both variants exhibited similar statistically significant decreases in the level of the cleaved clusterin peptide compared to wild-type HtrA1, indicating that these mutations inactivate HtrA1 to similar extents. (Fig. 4d, Table 2). HtrA1 levels in the conditioned media of the RPE cells were not perturbed by the R302A mutation in comparison to wild-type (Supp. Figure S5), indicating that the R302A mutation had no effect on HtrA1 secretion. In concordance with the WB data, no significant difference was observed between R310A single mutant and wild-type HtrA1 variants, suggesting that this mutation alone is not sufficient to perturb extracellular HtrA1 activity.
In human HtrA1, activation has been previously suggested to be a process of allosteric remodelling25. Here we propose an activation mechanism which is consistent with previous works on the HtrA proteases family12,20,26,27,28,29,30.This mechanism relies on the communication of the activation signal across contiguous monomers in the HtrA1 trimer. At the monomer level, our combined computational and experimental evidence shows that HtrA1 is self-regulated by a gating mechanism: the enzyme defaults to an inactive state by reversible occlusion of the catalytic site by L2 loop residues. Eventually, binding of the substrate first stabilizes the monomer’s active state, and then the activation signal is allosterically transmitted to other monomers via residues in the L3 loop (see Supp. Inf.), and in particular Arg302, facilitating subsequent substrate binding, shown by the wild-type high catalytic efficiency. Furthermore, our SPR experiments show that substrate binding is inhibited in the R302A mutant, indicating that binding and inter-monomer communication go hand-in-hand. In this way, HtrA1 would behave as a proficient trimeric machine in which monomers are coordinated and interdependent ratchets that cannot work in isolation. Our experimental evidence, based on a computational study of HtrA1 trimer dynamics, shows that this allosteric mechanism is possible in the absence of the PDZ domain, and that both L3 and LD loops play an essential role in cascading the activation signal across monomers.
De Regt et al. have recently proposed an analogous activation strategy for the bacterial counterparts of HtrA1 (DegP and DegS), based on structural information and mutational analysis of the L311 and LD-equivalent20 loops. A triad of residues Thr176, Arg187, Gln200 (DegP residue numbers), of which Arg187 is equivalent to Arg302 in HtrA1, would mediate inter-monomer allosteric activation of both DegP and also DegS. In the case of the bacterial DegS protease, the PDZ domain acts as an inhibitory lock which is only released when an OMP peptide binds and produces a series of conformational changes transmitted from the PDZ domain to the catalytic domain through the L3 loop11, explaining the proteolytic activity of DegSΔPDZ. However, the particular region that mediates the interactions between both domains in DegS (residues 178–187) seems to be poorly conserved across the family, with the exception of the Arg178 (Arg187 in DegP and Arg302 in HtrA1) equivalent residues. In addition, low resolution models of the full HtrA1 protein trimer derived from SAXS data9 show that the PDZ domains are not located in close contact with the L3 loop in solution, in order to allow a similar mechanism of autoinhibition. This evidence, together with our results and the fact that the HtrA1 PDZ domain is required to process polymeric proteins such as tubulin4 but not small peptides6,9 seem to suggest a different role to the activation process for this domain in HtrA1. Additional work will be required to fully explain the interplay between the different HtrA1 domains. The results obtained in our cellular RPE model confirm the relevance of our in vitro findings, which suggest that Arg302 might be essential for communicating the allosteric signal across monomers. Perturbation of this cross-monomer signal via the mutation R302A precludes activity both in the presence and in the absence of the PDZ domain. In contrast, a nearby mutation in the L3 loop (R310A), has no deleterious effect on the activity. Moreover, the isolating R302A mutation does not impede HtrA1 secretion to the extracellular matrix, but can inhibit both extracellular and intracellular HtrA1 protease activity, as measured by the impairment of both clusterin cleavage and HtrA1 self-degradation respectively.
Importantly, our data from native MS shows that the stability of the trimers is not significantly affected by the mutation R302A, confirming that this L3 loop residue is inactivating HtrA1 without disrupting HtrA1 trimeric architecture.
What are the biological implications of such an allosteric activation mechanism in HtrA1? As a protease, HtrA1 should be the subject of tight regulation by the cell in terms of substrate specificity and activity. By default, HtrA1 would be found in an inactive state, maintained by gatekeeper L2 loop residues. Occasionally, the conformational dynamics of loop L2 will partially open access to the catalytic site and subsequent substrate binding would transfer the activation signal to other monomers via L3 and LD loop interaction. Allosteric activation is an elegant strategy for self-regulation, which enables the protease to switch back to an inactive conformation once protein substrates are degraded or activators are removed. Additionally, not all substrates should be equally able to access the HtrA1 enzymatic cavity and activate the enzyme. A concerted strategy of monomer activation, such as the one we propose here, would allow this enzyme to act as a sensor that is activated by smaller or ‘easier’ substrates colocalized with more difficult protein targets to be digested. HtrA1 activation would be triggered by the small substrates binding to one monomer, while the other monomers remain active and accessible to other proteins, which by themselves, would not have been able to activate the protease. Such mechanism would also facilitate the degradation of complex tissue and fibrillar proteins such as collagens, fibronectin, fibromodulin, tubulin that have been identified as substrates of HtrA131. Interestingly, in this context, HtrA1 has been found localized in certain brain regions, and attributed a role in the proteolysis of tau and amyloid beta fibrils, as part of HtrA1 house-keeping repertoire32.
We have investigated the activation process of the HtrA1 protease by means of computational models, biophysical experiments, proteomics and disease cellular models. Our description of the allosteric regulation of HtrA1 opens up new possibilities for targeting the protease beyond the classical active-site inhibition, and provides an alternative manner of achieving selectivity towards HtrA1. Furthermore, it shows the complementary value of computational molecular dynamics models hand-in-hand with experimental validation at the biochemical, biophysical and cellular levels.
The human protease family HtrA is responsible for preventing protein misfolding and mislocalization, and a key player in several cellular processes. Among these, HtrA1 is implicated in several cancers, and cerebrovascular disease. Our work provides a mechanistic step-by-step description of HtrA1 activation and regulation, which is relevant for drug-targeting this protease. We report that the HtrA1 trimer is regulated by an allosteric mechanism by which monomers relay the activation signal to each other, in a PDZ-domain independent fashion. Our study establishes how HtrA1 trimerization plays a fundamental role in proteolytic activity. Moreover, it offers a structural explanation for HtrA1-defective pathologies as well as mechanistic insights into the degradation of complex extracellular fibrils such as tubulin, amyloid beta and tau that belong to the repertoire of HtrA1.
The datasets generated during and/or analysed during the current study are either provided in Supplementary Information or available from the corresponding author on reasonable request.
Modelling and simulation details
Cartesian coordinates of HtrA1 protease catalytic domain in the active (PDB ID: 3NZI) and inactive (PDB ID: 3NUM)25 states were extracted from their respective X-Ray solved structures. Residues were protonated at a pH of 8.033. GROMACS 5.0.5 and the AMBER 03 force field were used to perform all simulation steps34,35. To describe the dynamic units of HtrA1 we have used the MutInf method16,36, which uses mutual information to identify correlated movements based on simulations in the nanoseconds scale. We have employed the Girvan-Newman algorithm to detect the dynamic communities in our monomeric and trimeric systems. The DSSP program was used to assign the secondary structure to the residues in LD loop (P285 to S287) for each simulation snapshot. Wild-type and variant monomers aggregated simulations, starting from an active conformation, were used by getting snapshots each 5 ns. The percentage of simulation time assigned to a helix was measured by residue. Further computational details are provided in Supp. Information, including Hidden Markov model construction.
The HtrA1 wild-type catalytic domain (residues Asp161 to Asp369) of the human HtrA1 protease and its R302A, L345G, K346I, E306A/R310A and R310A variants were acquired from Origene. Proteins were expressed in HEK293 cells with a C-terminal FLAG-tag (Myc/DDK) for purification.
(I) The quenched H2-opt peptide (Mca-IRRVSYSFK(Dnp)K) from Innovagen was used as substrate to carry out all the enzymatic reactions at 25 °C9. Fluorescence was measured at 400 nm with excitation at 360 nm. Optimal enzyme concentrations were determined using titration curves with a H2-opt peptide concentration of 500 µM, and the following enzyme concentrations 0.1 nM, 0.2 nM, 0.4 nM, 0.8 nM, 1.6 nM, 3.2 nM and 6.4 nM. Signal produced by the unquenched fluorophore was recorded during 60 minutes at 1 minute intervals. For Km and Kcat determination, the following substrate concentrations were used at optimal enzyme concentrations (WT: 0.4 nM, L345G: 0.8 nM, E306A/R310A: 0.4 nM, K346I: 0.8 nM) 4 µM, 2 µM, 1 µM, 0.5 µM, 0.25 µM, 0.125 µM, 0.0625 µM and 0 µM. All experiments were done in an assay buffer consisting of 50 mM Tris pH 8.0, 200 mM NaCl, and 0.05% CHAPS. A calibration curve using the fluorophore (7-methoxycoumarin-4-yl acetyl) was used to convert the signal units. Values of Km and Kcat for the wild-type enzyme and its variants were calculated according to the data, by first obtaining the slopes (rates) of the linear models representing the relationship between the reaction product generated and the time for different concentrations of substrate, and then fitting the rates to the Michaelis-Menten equation using custom python scripts. (II) For the enzymatic assay in cell supernatant of RPE cells the substrate WIRRVSYSFC-MR121 was used29. Here the fluorophore MR121 is statically quenched by Trp. This substrate has favorable excitation and emission wavelengths (exc. 630 nm, em. 695 nm) for measurements in supernatant compared to the H2-opt substrate with excitation in the UV. The substrate was used at 500 nM final concentration diluted in assay buffer (50 mM Tris pH 8.0, 200 mM NaCl, 0.125% CHAPS).
Surface plasmon resonance
All proteins were immobilized by standard amino coupling chemistry on the CM5 sensor. HBS-N buffer (10 mM HEPES, 150 mM NaCl, pH 7.4) was used as running buffer. Protein immobilization and binding assay were performed at 25 °C, and the coupling step was performed for all proteins in 10 mM acetate buffer pH 5.5. A buffer composed of 50 mM Tris, 200 mM NaCl, 200 µM EDTA, 1% CHAPS, pH 8.0 was used as running buffer for binding assay. Binding of the compound DPMFKL-boro-V19 was analyzed in duplicates in a titration experiment up to a concentration of 20 µM by using 5 concentrations with dilution factor of 2.
A modified QTOF Ultima (MS-Vision, NL-Almere) mass-spectrometer was used for high-mass measurements. Mass-spectra calibration was done with CsI using the same ionization and declustering conditions. Extended details on sample preparation could be found in Supp. Experimental Procedures.
Human Fetal RPE Cell Culture and HtrA1 transfection
Cells were purchased from Sciencell (6540), seeded in plastic plates previously coated with Laminin 521 (BioLamina, LN521–03) and cultured for three weeks37. We used recombinant adenoviruses containing the human HtrA1 mRNA (GenBank: NM_002775; SIRION Biotech) for the different variants: wild-type, S328A, R302A or R310A.
Western Blot analysis was performed similarly as to what is described by Vierkotten et al.38. Full details in Supp. Info.
Monitoring HtrA1 activity by targeted proteomics
A targeted proteomics assay was developed using the mass spectrometry-based selected reaction monitoring (SRM) approach for the novel HtrA1-driven clusterin cleavage site EQL362-NEQ. www.msstats.org) in R version 3.3.2 (www.r-project.org)39. Peptide intensity values were log2 transformed and the median intensities were equalized across all heavy-labeled reference peptides. Peptide summarization to protein abundance was performed using Tukey’s median polish, and the cleaved clusterin peptide NEQFNWVSR was treated as a separate protein. Clusterin cleavage was assessed by adjusting the cleaved peptide abundance for HtrA1 and clusterin content present in the samples, acquired as the residuals of a model containing the two protein amounts. Statistical modeling was performed on these adjusted cleavage values, taking into account the experimental factors and the six different cell types. The following comparisons were made, adjusted for multiple testing (Hothorn et al., 2008): HtrA1 − EV, S328A − EV, HtrA1 − S328A, R302A − HtrA1, R310A − HtrA1, and R302A − S328A. More details can be found in Supporting Statistics.
Dobson, C. M. Protein folding and misfolding. Nature 426, 884–890, https://doi.org/10.1038/nature02261 (2003).
Clausen, T., Kaiser, M., Huber, R. & Ehrmann, M. HTRA proteases: regulated proteolysis in protein quality control. Nat Rev Mol Cell Biol 12, 152–162, https://doi.org/10.1038/nrm3065 (2011).
Tennstaedt, A. et al. Human high temperature requirement serine protease A1 (HTRA1) degrades tau protein aggregates. J Biol Chem 287, 20931–20941, https://doi.org/10.1074/jbc.M111.316232 (2012).
Chien, J., He, X. & Shridhar, V. Identification of tubulins as substrates of serine protease HtrA1 by mixture‐based oriented peptide library screening. Journal of cellular biochemistry 107, 253–263 (2009).
Dewan, A. et al. HTRA1 promoter polymorphism in wet age-related macular degeneration. Science 314, 989–992, https://doi.org/10.1126/science.1133807 (2006).
Verdura, E. et al. Heterozygous HTRA1 mutations are associated with autosomal dominant cerebral small vessel disease. Brain 138, 2347–2358, https://doi.org/10.1093/brain/awv155 (2015).
Hara, K. et al. Association of HTRA1 mutations and familial ischemic cerebral small-vessel disease. N Engl J Med 360, 1729–1739, https://doi.org/10.1056/NEJMoa0801560 (2009).
Chien, J. et al. Serine protease HtrA1 associates with microtubules and inhibits cell migration. Mol Cell Biol 29, 4177–4187, https://doi.org/10.1128/MCB.00035-09 (2009).
Eigenbrot, C. et al. Structural and functional analysis of HtrA1 and its subdomains. Structure 20, 1040–1050, https://doi.org/10.1016/j.str.2012.03.021 (2012).
Krojer, T., Sawa, J., Huber, R. & Clausen, T. HtrA proteases have a conserved activation mechanism that can be triggered by distinct molecular cues. Nature structural & molecular biology 17, 844–852 (2010).
De Regt, A. K., Baker, T. A. & Sauer, R. T. Steric clashes with bound OMP peptides activate the DegS stress-response protease. Proceedings of the National Academy of Sciences 112, 3326–3331 (2015).
Sohn, J., Grant, R. A. & Sauer, R. T. Allosteric activation of DegS, a stress sensor PDZ protease. Cell 131, 572–583, https://doi.org/10.1016/j.cell.2007.08.044 (2007).
Lane, T. J., Bowman, G. R., Beauchamp, K., Voelz, V. A. & Pande, V. S. Markov state model reveals folding and functional dynamics in ultra-long MD trajectories. Journal of the American Chemical Society 133, 18413–18419 (2011).
Bowman, G. R. & Geissler, P. L. Equilibrium fluctuations of a single folded protein reveal a multitude of potential cryptic allosteric sites. Proceedings of the National Academy of Sciences 109, 11681–11686 (2012).
Malmstrom, R. D., Kornev, A. P., Taylor, S. S. & Amaro, R. E. Allostery through the computational microscope: cAMP activation of a canonical signalling domain. Nature communications 6 (2015).
McClendon, C. L., Kornev, A. P., Gilson, M. K. & Taylor, S. S. Dynamic architecture of a protein kinase. Proc Natl Acad Sci USA 111, E4623–4631, https://doi.org/10.1073/pnas.1418402111 (2014).
Peisach, E., Wang, J., de los Santos, T., Reich, E. & Ringe, D. Crystal structure of the proenzyme domain of plasminogen. Biochemistry 38, 11180–11188, https://doi.org/10.1021/bi991130r (1999).
Hemmer, W., McGlone, M., Tsigelny, I. & Taylor, S. S. Role of the glycine triad in the ATP-binding site of cAMP-dependent protein kinase. Journal of Biological Chemistry 272, 16946–16954 (1997).
Weski, J. et al. Chemical Biology Approaches Reveal Conserved Features of a C‐Terminal Processing PDZ Protease. ChemBioChem 13, 402–408 (2012).
De Regt, A. K. et al. A conserved activation cluster is required for allosteric communication in HtrA-family proteases. Structure 23, 517–526 (2015).
Chen, Y. et al. A novel mutation of the high-temperature requirement A serine peptidase 1 (HTRA1) gene in a Chinese family with cerebral autosomal recessive arteriopathy with subcortical infarcts and leukoencephalopathy (CARASIL). J Int Med Res 41, 1445–1455, https://doi.org/10.1177/0300060513480926 (2013).
Forest, D. L., Johnson, L. V. & Clegg, D. O. Cellular models and therapies for age-related macular degeneration. Disease models & mechanisms 8, 421–427 (2015).
Jomaa, A., Iwanczyk, J., Tran, J. & Ortega, J. Characterization of the autocleavage process of the Escherichia coli HtrA protein: implications for its physiological role. Journal of bacteriology 191, 1924–1932 (2009).
An, E., Sen, S., Park, S. K., Gordish-Dressman, H. & Hathout, Y. Identification of novel substrates for the serine protease HTRA1 in the human RPE secretome. Investigative ophthalmology & visual science 51, 3379–3386 (2010).
Truebestein, L. et al. Substrate-induced remodeling of the active site regulates human HTRA1 activity. Nat Struct Mol Biol 18, 386–388, https://doi.org/10.1038/nsmb.2013 (2011).
Sohn, J., Grant, R. A. & Sauer, R. T. Allostery Is an Intrinsic Property of the Protease Domain of DegS Implications for Enzyme Function and Evolution. Journal of Biological Chemistry 285, 34039–34047 (2010).
Mauldin, R. V. & Sauer, R. T. Allosteric regulation of DegS protease subunits through a shared energy landscape. Nature chemical biology 9, 90–96 (2013).
Sohn, J. & Sauer, R. T. OMP peptides modulate the activity of DegS protease by differential binding to active and inactive conformations. Molecular cell 33, 64–74 (2009).
Neuweiler, H., Schulz, A., Böhmer, M., Enderlein, J. & Sauer, M. Measurement of submicrosecond intramolecular contact formation in peptides at the single-molecule level. Journal of the American Chemical Society 125, 5324–5330 (2003).
Kim, S. & Sauer, R. T. Cage assembly of DegP protease is not required for substrate-dependent regulation of proteolytic activity or high-temperature cell survival. Proceedings of the National Academy of Sciences 109, 7263–7268 (2012).
Jiang, J. et al. Overexpression of HTRA1 leads to down-regulation of fibronectin and functional changes in RF/6A cells and HUVECs. PloS one 7, e46115 (2012).
Poepsel, S. et al. Determinants of amyloid fibril degradation by the PDZ protease HTRA1. Nature chemical biology 11, 862–869 (2015).
Dolinsky, T. J., Nielsen, J. E., McCammon, J. A. & Baker, N. A. PDB2PQR: an automated pipeline for the setup of Poisson-Boltzmann electrostatics calculations. Nucleic Acids Res 32, W665–667, https://doi.org/10.1093/nar/gkh381 (2004).
Abraham, M. J. et al. GROMACS: High performance molecular simulations through multi-level parallelism from laptops to supercomputers. SoftwareX 1, 19–25 (2015).
Sorin, E. J. & Pande, V. S. Exploring the helix-coil transition via all-atom equilibrium ensemble simulations. Biophysical Journal 88, 2472–2493 (2005).
McClendon, C. L., Friedland, G., Mobley, D. L., Amirkhani, H. & Jacobson, M. P. Quantifying correlations between allosteric sites in thermodynamic ensembles. Journal of chemical theory and computation 5, 2486–2502 (2009).
Sonoda, S. et al. A protocol for the culture and differentiation of highly polarized human retinal pigment epithelial cells. Nature protocols 4, 662–673 (2009).
Vierkotten, S., Muether, P. S. & Fauser, S. Overexpression of HTRA1 leads to ultrastructural changes in the elastic layer of Bruch’s membrane via cleavage of extracellular matrix components. PloS one 6, e22959 (2011).
R. Core Team (2013). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria. http://www.R-project.org.
A.C. and E.M. acknowledge the support of the Roche Postdoctoral Fellowship program. P.P. gratefully thanks Juan Domingo Gispert, José Luis Molinuevo, and the team at BarcelonaBeta Brain Research Center for their support. Authors thank Sascha Fauser, Vice President of pRED Ophthalmology, Martin Strahm, Martin Erkens, Andrew Thomas, Josiane Kohler and Carlos Fenoy. We thank Klaus Müller for inspiration and encouragement. OS acknowledges support from grants DFG (SCHI 871/11-1) and (EXC 294, BIOSS).
All authors are F. Hoffman-La Roche employees or collaborators.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Cabrera, A.C., Melo, E., Roth, D. et al. HtrA1 activation is driven by an allosteric mechanism of inter-monomer communication. Sci Rep 7, 14804 (2017). https://doi.org/10.1038/s41598-017-14208-z
Proteomic profiling in cerebral amyloid angiopathy reveals an overlap with CADASIL highlighting accumulation of HTRA1 and its substrates
Acta Neuropathologica Communications (2022)
Genotype–phenotype correlations of heterozygous HTRA1-related cerebral small vessel disease: case report and systematic review
Murine osteoclasts secrete serine protease HtrA1 capable of degrading osteoprotegerin in the bone microenvironment
Communications Biology (2019)