Organic materials exhibit exceptional room temperature light emitting characteristics and enormous exciton oscillator strength, however, their low charge carrier mobility prevent their use in high-performance applications such as electrically pumped lasers. In this context, ultralow threshold polariton lasers, whose operation relies on Bose-Einstein condensation of polaritons – part-light part-matter quasiparticles, are highly advantageous since the requirement for high carrier injection no longer holds. Polariton lasers have been successfully implemented using inorganic materials owing to their excellent electrical properties, however, in most cases their relatively small exciton binding energies limit their operation temperature. It has been suggested that combining organic and inorganic semiconductors in a hybrid microcavity, exploiting resonant interactions between these materials would permit to dramatically enhance optical nonlinearities and operation temperature. Here, we obtain cavity mediated hybridization of GaAs and J-aggregate excitons in the strong coupling regime under electrical injection of carriers as well as polariton lasing up to 200 K under non-resonant optical pumping. Our demonstration paves the way towards realization of hybrid organic-inorganic microcavities which utilise the organic component for sustaining high temperature polariton condensation and efficient electrical injection through inorganic structure.
The ease of creation and manipulation of polariton Bose-Einstein condensates1,2,3,4,5 through direct optical pumping of semiconductor microcavities has recently led to demonstrations of numerous prototype polaritonic devices including low threshold lasers6,7,8,9, interferometers10 and transistor devices11. The later are almost entirely based on GaAs semiconductors that offer superior material quality, despite the restriction to low temperature operation due to the small exciton binding energy in this material12, 13. Organic microcavities owing to their very robust excitons14 are much more resilient and have been shown to support room temperature operation15,16,17. Furthermore, recent studies highlight their superfluid properties and long range propagation with potential use in interferometric devices18, 19.
In the pioneering work by Agranovich20, and co-workers it was shown that hybrid organic-inorganic structures, which mix two degenerate excitonic species can combine many desirable properties such as large exciton Bohr radius, favouring polariton-polariton interaction and relaxation as well as large oscillator strength for room temperature operation. Furthermore, optical nonlinearities in such systems were predicted to be increased by up to two orders of magnitude due to hybridization of the excitonic species21. Recent observations of the strong light-matter coupling in such hybrid structures22, 23, highlights their potential, albeit no observation of optical nonlinearities or lasing have been reported up to now.
Here, we obtain cavity photon-mediated hybridization of Frenkel and Wannier-Mott excitons in a hybrid microcavity formed by incorporation of organic J-aggregate dye and inorganic GaAs quantum wells (QWs) inside a high quality factor optical cavity (Q~2000). The constituents of the hybrid microcavities are described under Materials and Methods. The resulting mixed bosonic polariton quasiparticles, owing to their hybrid nature are shown to exhibit lasing under pulsed optical excitation that persists up to 200 K. Furthermore, electrical contacts (see Fig. 1a) defined on to the inorganic part of the device allow for efficient electrical injection of the whole system via ultrafast energy exchange between different excitonic species in a mixed polariton state.
We study the linear properties of hybrid exciton-polaritons in using 0.5 mW of continuous wave optical excitation tuned above the stopband of the dielectric mirror at 1.908 eV. The sample is held in a closed cycle-cryostat at elevated temperatures ranging from 80–160 K in order to obtain sufficiently strong photoluminescence (PL) at the wavevectors of the expected anti-crossing between the cavity and exciton modes. The measurements are performed with the use of a linear polarizer, recording only the TE polarization for clarity. Figure 2(a–c) shows the dispersion for different temperatures and detunings (Δ); Δ here is defined as the energy difference between the QW heavy hole (HH) exciton and the cavity mode (CM). By increasing the temperature, we observe a redshift of the GaAs exciton energy as it is clearly seen by the change of the HH exciton energy between Fig. 2(a–c), while the J-aggregate exciton energy varies much less with temperature in agreement with previous observations24.
The normalized photoluminescence from the lower polariton (LPB) and middle polariton (MPB) branches of Fig. 2(a–c) is superimposed with the calculated hybrid polariton dispersion of the LPB, MPB and upper polariton branch (UPB). The modeled dispersions are calculated using a four coupled oscillator model that includes the HH and light hole (LH) excitons of the GaAs QWs, the J-aggregate excitons and the cavity photon mode25,26,27 with corresponding linewidth broadenings. The J-aggregate exciton linewidth is γJ-agg = 13 meV at 80 K and remains nearly constant for the whole experimental temperature range. The corresponding cavity mode linewidth is γcav = 0.1 meV while HH and LH excitons linewidths vary slightly with temperature from γHH = 3.6 meV, γLH = 3.7 meV at 80 K to 4.2 meV, 4.5 meV at 160 K respectively (see Supplementary Table S3). In this simple coupled oscillators model, we have neglected non-radiative resonance energy transfer due to the large inorganic-organic spatial separation. The blue dotted line refers to the bare cavity mode energy, while the red dashed lines mark the full width at half maximum (FWHM) of the corresponding polariton branches. From the fitted dispersion curves we obtain a Rabi splitting of 4.5 meV for the GaAs HH exciton and 50 meV for the larger oscillator strength J-aggregate excitons respectively. The corresponding polariton linewidth at the crossing point of cavity mode with J-aggregate is ~6.5 meV.
The non-uniform distribution of J-aggregates in the suspension matrix, allows us to locate areas of the sample with negligible concentrations of J-aggregate. Figure 2d shows the dispersion of the PL in the absence of strong coupling with J-aggregate while the system is strongly coupled to only GaAs excitons. We note the difference in dispersions presented in Fig. 2c, d around ~1.58 eV. The green dots in Fig. 2c (see Supplementary Fig. S1) show a clear deviation between the parabolic dispersion of bare cavity mode (blue dots), also shown in Fig. 2d, and the LPB of Fig. 2c, providing unequivocal evidence of strong coupling with the J-aggregate in Fig. 2(a–c).
The Hopfield coefficients between the cavity, J-aggregate, HH and LH excitons used to fit the experimental dispersion of the LPB of Fig. 2b show that k|| = 0, exhibit substantial mixing of all four components (0.88, 0.075, 0.04, 0.005 respectively, also shown in Supplementary Fig. S2). In particular, Frenkel and cavity photon components dominate the polariton character at normal incidence, while the Wannier-Mott excitons contribution becomes considerable at large angles.
An important implication for the efficiency of the pumping scheme in the studied structure is that GaAs QW with exciton energy lying below J-aggregate exciton energy serves as efficient reservoir for accumulation of injected carriers. These subsequently feed lower polariton states near the HH anticrossing point with the lower polariton branch as seen from the bright emission in Fig. 2(a–c).
Hybrid polariton nonlinearities
Nonlinear properties of hybrid polaritons are studied by optically exciting the structure with quasi-CW YAG laser at 532 nm with 500 ps pulse duration and a repetition rate of 7.58 kHz. The diameter of the excitation spot size is 5 μm. In Fig. 3a we provide evidence of hybrid polariton lasing by the narrow and intense emission at normal incidence above threshold. Fitted polariton branch dispersions show that lasing emission occurs at least 10 meV below the corresponding bare cavity mode dispersion confirming that the observed nonlinearity occurs indeed in the strong coupling regime with J-aggregate excitons. Furthermore, our theoretical gain calculations presented in supplementary Fig. S4, show that at the injected carrier densities used in the experiment, no population inversion and gain can be supported by the GaAs QW active medium at the lasing energy and highlight the role of hybridization in achieving polariton lasing in this device.
Normal incidence PL spectra with increasing excitation power is plotted in Fig. 3b. It shows nonlinear increase in the PL intensity accompanied by continuous blueshift (see also Supplementary Mov. S5) of the lower polariton branch which originates from both J-aggregate and QW exciton-exciton interactions28. Such interactions are considerably weaker for the tightly bound Frenkel excitons characteristic of organic semiconductors, therefore largest contribution to the blueshift arises from GaAs QW excitons. Assuming characteristic exciton-exciton interaction constant of ~6.5 μeV·μm2 for such QWs and energy blueshift dependence on carrier density ΔΕ = g N, we estimate that the carrier density at the threshold when ΔΕ = 1.48 meV per QW is ~3.78 109 cm−2, well below Mott density. The corresponding integrated emission together with the FWHM emission linewidth as well as blueshift are plotted in Fig. 3(c,d) respectively. Expectedly, nonlinear increase in the emission is accompanied by significant line narrowing of the PL emission around threshold as shown in Fig. 3c at 16.1 μJ/cm2. At higher excitation powers, the emission is broadened slightly due to increased scattering from and to the exciton reservoir and within the condensate itself.
Identical power dependent PL measurements using stretched regenerative amplifier pulses of ~3 ps duration, reveal similar lower polariton energy blueshift at the corresponding threshold value of 13.9 µJ/cm2 confirming that the onset of lasing regime occurs indeed at similar carrier densities despite very different excitation conditions used (see Supplementary Fig. S6). This is because for a typical carrier lifetime in the order of 1ns29, both excitation schemes use pulse durations ≤500 ps, which are sufficiently small to ignore any recombination effects, resulting in the same maximum carrier concentrations created at the end of the pulse. However, discrepancies are observed above threshold in the overall blueshift, for the two cases. Notably, the high repetition rate laser ~250 kHz delivers larger average power onto the sample causing sample heating and energy redshift which counteracts the expected energy blueshift from the rising power density30, 31. In contrast, low repetition rate laser produces minimal heating and blueshift continues up to highest recorded excitation powers. Furthermore, high repetition rate laser and subsequent heating induce photobleaching32 of the sample above threshold, as opposed to very robust lasing operation under low repetition rate excitation.
Efficient population of lower energy polariton states responsible for the onset of lasing is achieved by the presence of HH exciton reservoir in the vicinity of the LPB capable of directly feeding lower polariton states below relaxation bottleneck. We therefore study the effect of temperature and energy position of the feeding reservoir on the lasing threshold of our hybrid device. Strikingly, for a negatively detuned Δ = −25.2 meV device, the lasing threshold gradually decreases with increasing temperature from 9 K up to 200 K as seen in the Fig. 4. This threshold reduction is obtained by feeding polaritons closer to the lowest lying polariton states requiring shorter relaxation paths. The lasing threshold increases sharply when HH exciton energy approaches the lower polariton branch due to the rapid change in the LPB density of states33 as well as inability of HH exciton reservoir to efficiently populate LPB states once its energy is below cavity mode.
We note that identical structures without J-aggregate dye show no polariton lasing at such large negative detunings. Furthermore, these structures do not exhibit lasing even in the weak coupling regime, since gain arising from population inversion has no overlap with the cavity mode.
Hybrid polariton LED
We exploit the hybrid nature of exciton polariton states to efficiently exchange energy between inorganic and organic excitations and build a prototype hybrid polariton light emitting device described in detail in the materials and methods section. Electrical contacts are fabricated onto the inorganic section of the device allowing for direct intracavity injection of carriers into the GaAs QWs. A mesa with 350 μm outer diameter and 150 μm inner diameter is operated under forward DC bias producing electrical current of 1.61 mA. Due to strong mixing of polariton states the injected excitons are rapidly transferred34 from the inorganic excitons to the organic counterparts radiatively, resulting in strong electroluminescence (EL) presented in Fig. 5. The device shows characteristic anticrossing behaviour and operates in the strong coupling regime even at elevated temperatures of 160 K. However, in the present device only small fraction of injected carriers are captured inside QWs with the escaping carriers contributing strongly to EL emission arising from the DBR barriers. By comparing LPB blueshits observed in EL measurements under highest possible electrical injection current of 5.01 mA, with PL measurements, we conclude that, similar blueshift of 0.8 meV is produced under optical excitation with 4μJ/cm2, which is ~4 times below lasing threshold. Therefore, we believe that further improvements of the electrical contacts in the presence of organics as well as better carrier capture efficiency will be necessary to achieve lasing operation under electrical injection.
The results presented here, show that it is possible to achieve efficient energy exchange between inorganic and organic exciton species via their hybridization with the cavity photon in a polariton state. We exploit such resonant interactions and the hybrid nature of polaritons to dramatically enhance optical nonlinearities in our system allowing demonstration of polariton lasing at 200 K. Furthermore, the advantage of the implemented electrical injection scheme is that it does not require the use of low mobility organic hole injection layers that typically limits device performance35. Instead, the present device relies on well-established GaAs technology to electrically inject carriers into inorganic part of the device36 and uses strong coupling regime to efficiently transfer excitation from inorganic to organic semiconductor excitations, thus promising a new route to electrical injection of organic active medium.
The microcavity sample investigated in the present work is an organic-inorganic hybrid microcavity light emitting diode - LED, depicted in Fig. 1a. The structure consists of an active layer, composed of III-V semiconductor quantum wells and a molecular J-aggregate forming cyanine dye film, embedded in between two distributed Bragg reflectors (DBR) mirrors. The bottom DBR is formed by molecular beam epitaxy (MBE) and consists of 24 λ/4 pairs of n-type doped AlAs/GaAs layers, followed by six GaAs/AlGaAs quantum wells capped by a p-type AlGaAs layer which acts as a spacer at the interface with the organic film. In Fig. 1b reflectivity spectra on inorganic part of the structure reveals HH, LH exciton resonances as well as QW PL emission which overlaps with bare J-aggregate PL. To ensure electrical isolation 350 µm diameter mesas are fabricated using reactive ion etching. The cyanine J-aggregate dye chosen for the purpose is the U3(3-[(2Z)-5-chloro-2-[((3E)-3-[5-chloro-3-(3-triethylammonium-sulfonatopropyl)-1,3benzothiazol-3-ium-2-yl]methylene-2,5,5-trimethylcyclohex-1-en1-yl)methylene]-1,3-benzothiazol-3(2 H)-yl] propane-1-sulfonate)24 and its chemical structure is shown in Supplementary Fig. S7. After the U3 dye being previously dissolved in a water based poly(vinyl alcohol) matrix solution (3 mg/ml), the device is completed by spin casting organic J-aggregate U3 dye film of ~90 nm thickness followed by evaporation of the top dielectric mirror consisting of 8 alternating pairs of Ta2O5/SiO2 deposited in an oxygen plasma atmosphere.
Wertz, E. et al. Spontaneous formation and optical manipulation of extended polariton condensates. Nature Phys. 6, 860–864 (2010).
Kasprzak, J. et al. Bose–Einstein condensation of exciton polaritons. Nature 443, 409–414 (2006).
Boulier, T. et al. Polariton-generated intensity squeezing in semiconductor micropillars. Nature Commun. 5, 3260 (2014).
Amo, A. et al. Collective fluid dynamics of a polariton condensate in a semiconductor microcavity. Nature 457, 291–295 (2009).
Ohadi, H. et al. Tunable magnetic alignment between trapped exciton-polariton condensates. Phys. Rev. Lett. 116, 106403 (2016).
Bhattacharya, P. et al. Room temperature electrically injected polariton laser. Phys. Rev. Lett. 112, 236802 (2014).
Das, A. et al. Room temperature ultralow threshold GaN nanowire polariton laser. Phys. Rev. Lett. 107, 066405 (2011).
Savvidis, P. G. Nature Photon. 8, 588–589 (2014).
Schneider, C. et al. An electrically pumped polariton laser. Nature 497, 348–352 (2013).
Sturm, C. et al. All-optical phase modulation in a cavity-polariton Mach–Zehnder interferometer. Nature Commun. 5, 3278 (2014).
Gao, T. et al. Polariton condensate transistor switch. Phys. Rev. B 85, 235102 (2012).
Andreani, L. C. & Pasquarello, A. High exciton binding energies in GaAs/GaA1As quantum wells. Superl. and Microstr. 9, 1–4 (1991).
Chao, C. Y.-P. & Chuang, S. L. Momentum-space solution of excited states and heavy-hole-light-hole mixing in quantum wells. Phys. Rev. B 48, 8210–8221 (1993).
Lidzey, D. G. et al. Strong exciton–photon coupling in an organic semiconductor microcavity. Nature 395, 53–55 (1998).
Lidzey, D. G. et al. Room temperature polariton emission from strongly coupled organic semiconductor microcavities. Phys. Rev. Lett. 82, 3316–3319 (1999).
Daskalakis, K. S., Maier, S. A., Murray, R. & Kéna-Cohen, S. Nonlinear interactions in an organic polariton condensate. Nature Mater. 13, 271–278 (2014).
Plumhof, J. D., Stöferle, T., Mai, L., Scherf, U. & Mahrt, R. F. Room-temperature Bose–Einstein condensation of cavity exciton–polaritons in a polymer. Nature Mater. 13, 247–252 (2014).
Giovanni, L. et al. High-speed flow of interacting organic polaritons. Light Sci. Appl. 6, e16212 (2017).
Giovanni, L. et al. Room-temperature superfluidity in a polariton condensate. Nature Phys. AOP, doi:https://doi.org/10.1038/nphys4147 (2017).
Agranovich, V. M., Basko, D. M., La Rocca, G. C. & Bassani, F. Excitons and optical nonlinearities in hybrid organic-inorganic nanostructures. J. Phys. Condens. Matter 10, 9369–9400 (1998).
Agranovich, V. M., Gartstein, Y. N. & Litinskaya, M. Hybrid resonant organic-inorganic nanostructures for optoelectronic applications. Chem. Rev. 111, 5179–5214 (2001).
Lanty, G. et al. Hybrid cavity polaritons in a ZnO-perovskite microcavity. Phys. Rev. B 84, 195449 (2011).
Slootsky, M., Liu, X., Menon, V. M. & Forrest, S. R. Room temperature Frenkel-Wannier-Mott hybridization of degenerate excitons in a strongly coupled microcavity. Phys. Rev. Lett. 112, 076401 (2014).
Wenus, J. et al. Optical strong coupling in microcavities containing J-aggregates absorbing in near-infrared spectral range. Organic Electronics 8, 120–126 (2007).
Kuhn, T. & Rossi, F. Theory of ultrafast phenomena in photoexcited semiconductors. Rev. Mod. Phys. 74, 895 (2002).
Chovan, J., Perakis, E., Ceccarelli, S. & Lidzey, D. G. Controlling the interactions between polaritons and molecular vibrations in strongly coupled organic semiconductor microcavities. Phys. Rev. B 78, 045320 (2008).
Somaschi, N. et al. Ultrafast polariton population build-up mediated by molecular phonons in organic microcavities. Appl. Phys. Lett. 99, 143303 (2011).
Ciuti, C., Schwendimann, P., Deveaud, B. & Quattropani, A. Theory of the angle-resonant polariton amplifier. Phys. Rev. B 62, R4825–R4828 (2000).
Houdré, R. et al. Saturation of the strong-coupling regime in a semiconductor microcavity: Free-carrier bleaching of cavity polaritons. Phys. Rev. B 52, 7810 (1995).
Carusotto, I. & Ciuti, C. Quantum fluids of light. Rev. Mod. Phys. 85, 299–366 (2013).
Deng, H., Haug, H. & Yamamoto, Y. Exciton-polariton Bose-Einstein condensation. Rev. Mod. Phys. 82, 1489 (2010).
Peng, G. D., Xiong, Z. & Chu, P. L. Fluorescence decay and recovery in organic dye-doped polymer optical fibers. J. Lightwave Technol. 16, 2365–2372 (1998).
Mazza, L., Fontanesi, L. & La Rocca, G. C. Organic-based microcavities with vibronic progressions: Photoluminescence. Phys. Rev. B 80, 235314 (2009).
Christogiannis, N. et al. Characterizing the electroluminescence emission from a strongly coupled organic semiconductor microcavity LED. Adv. Optical. Mater. 1, 503–509 (2013).
Baldo, M. A., Holmes, R. J. & Forrest, S. R. Prospects for electrically pumped organic lasers. Phys. Rev. B 66, 035321 (2002).
Flatten, L. C. et al. Electrically tunable organic–inorganic hybrid polaritons with monolayer WS2. Nature Commun. 8, 14097 (2017).
We acknowledge grants, EPSRC Programme grant in Hybrid Polaritonics, Greece-Russia bilateral ‘POLISIMULATOR’ project on Quantum Technologies funded by Greek GSRT, Stavros Niarchos Foundation “ARCHERS” project, EU FP7 ICARUS 237900 and ERC Starting grant ‘POLAFLOW’. We thank L. Mouchliadis for discussions and Dr. Jurii L. Slominskii for synthesizing the U3 J-aggregate dye.
The authors declare that they have no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Paschos, G.G., Somaschi, N., Tsintzos, S.I. et al. Hybrid organic-inorganic polariton laser. Sci Rep 7, 11377 (2017). https://doi.org/10.1038/s41598-017-11726-8
Exciton polaritons based on planar dielectric Si asymmetric nanogratings coupled with J-aggregated dyes film
Frontiers of Optoelectronics (2020)
Annual Review of Physical Chemistry (2020)
ACS Applied Nano Materials (2020)
Applied Physics Letters (2020)
Materials Today (2020)