Abstract
Mammalian cells have been widely shown to respond to nano- and microtopography that mimics the extracellular matrix. Synthetic nano- and micron-sized structures are therefore of great interest in the field of tissue engineering, where polymers are particularly attractive due to excellent biocompatibility and versatile fabrication methods. Ordered arrays of polymeric pillars provide a controlled topographical environment to study and manipulate cells, but processing methods are typically either optimized for the nano- or microscale. Here, we demonstrate polymeric nanopillar (NP) fabrication using 3D direct laser writing (3D DLW), which offers a rapid prototyping across both size regimes. The NPs are interfaced with NIH3T3 cells and the effect of tuning geometrical parameters of the NP array is investigated. Cells are found to adhere on a wide range of geometries, but the interface depends on NP density and length. The Cell Interface with Nanostructure Arrays (CINA) model is successfully extended to predict the type of interface formed on different NP geometries, which is found to correlate with the efficiency of cell alignment along the NPs. The combination of the CINA model with the highly versatile 3D DLW fabrication thus holds the promise of improved design of polymeric NP arrays for controlling cell growth.
Similar content being viewed by others
Introduction
Nano- and microtopography mimicking the environment of the extracellular matrix has been widely employed for in vitro studies of cell behavior with the prospect of designing better implants and engineering tissue1, 2. Surface features on the nano- and microscale have been obtained through the shaping of a wide variety of materials2, 3, but polymers are particularly convenient due to low-cost and versatile fabrication methods4. Furthermore, polymers have an excellent biocompatibility and some are even biodegradable, which is of utmost importance in the context of implant technology5. Another attractive feature is optical transparency, which eases the imaging analysis of cells on or inside polymeric structures. The versatility of polymer materials is reflected in the numerous cell studies on a variety of polymeric structures, such as lines or gratings6,7,8, nanopores9, 10, and square11,12,13, triangular14, round6, 15,16,17 or even bridged18 pillars. Among these, ordered arrays of vertical polymeric nano- or micropillars provide a controlled 3D-environment for measuring cell traction forces15, 19, 20, studying cell deformation21, tuning cell alignment14, 22, 23 or controlling stem cell differentiation14, 24,25,26.
However, a current limitation is the fabrication of vertical arrays of polymeric nanopillars (NPs) on demand for investigation of the influence of NP geometry and distribution on cell behavior. Whereas numerous fabrication approaches have been implemented to generate polymeric micro- and nanopatterns4, they usually involve laborious multi-step processing and require expensive masks, especially when submicron features are targeted. Furthermore, most of them are adapted for the nano- or microregime, rarely for both. Indeed, as can be seen from the literature overview of polymeric pillar geometries used for cell studies in Fig. 1 (see SI Table S1 for more details), thinner polymeric pillars (≤500 nm diameter) typically only reach lengths of 1–2 µm, whereas longer structures are seen mainly for diameters in the microregime (≥1 µm). Thus, cell behavior on longer polymeric NPs or for NP diameters in the transition between nano- and microregimes remain only scarcely investigated.
In this context, 3D direct laser writing (3D DLW) by multi-photon polymerization offers an appealing approach to overcome these limitations. It is now well established that this maskless technology enables the production of complex and arbitrary 3D structures both at the micro- and nanoscale27,28,29,30. In particular, 3D DLW allows for a rapid prototyping of NP arrays with a variety of diameters, lengths, densities and lattice types, which makes it ideal for screening the impact of geometrical parameters on cell behavior.
Here, we take advantage of the great flexibility of 3D DLW to venture into an unexplored size regime, which is difficult to reach with other fabrication techniques. We hypothesize that cells will remain sensitive to geometrical tuning within this regime and strive to extend the Cell Interface with Nanostructure Arrays (CINA) model, which has previously been successfully applied to nanostructures with diameters ≤500 nm31. Importantly, if the CINA model applies to this size regime, the ability to predict the cell-NP interface at a given geometry, which can potentially influence the cell response, would make screening and optimization of NP arrays even more rapid. For this purpose, we tune both NP length and density and observe the effects on the interface and behavior of fibroblasts (NIH3T3), which are major players in wound healing32 and known to respond to both nano- and microtopographical cues33, 34.
Results and Discussion
Fabrication of Vertical Polymeric NPs
Polymeric NPs were fabricated by 3D DLW where polymeric 3D microstructures can be precisely defined by displacing the focused laser beam into the photoresist. The submicron resolution is given by taking advantage of the non-linear chemical response of the photoresist combined with the non-linear multi-photon absorption process35. Thanks to the exquisite confinement of the photopolymerization reaction, the thickness of the monomer layer does not have to be precisely controlled, which in turn simplifies the experimental procedure (see experimental section). Besides, since the fabrication area in the present paper is limited to a small number of 250 × 250 µm2 arrays of NPs, 3D DLW can be seen as a rapid prototyping method to generate various geometrical environments. Indeed, contrary to conventional lithography technologies where a mask is requested, the flexibility of design offered by 3D DLW allows for a rapid screening of different geometries to obtain fast feedback regarding the targeted application36.
As a photoresist, we selected a formulation based on pentaerythritol triacrylate (PETIA), which is a multifunctional monomer to favor the elaboration of mechanically stable 3D structures. Besides, Klein and coworkers have demonstrated that PETIA is biocompatible and promotes cell adhesion18 making it an ideal candidate for our present investigation. However, contrary to Klein et al., we used Lucirin TPO as the photoinitiator, which is more soluble in the chosen monomer and well-adapted regarding the wavelength selected (800 nm) for triggering the photopolymerization37.
As mentioned previously, 3D DLW has been exploited for its high flexibility in the design of the NPs both in terms of structure diameter, density, length and pattern, where several parameters may even be altered within a small area on the same chip. Currently, lengths of up to 6 µm and diameters down to ~500 nm (see SI Fig. S1-1) are easily achieved. In the present study, we fix the NP diameter to ~750 nm and explore the effects on NIH3T3 cells when tuning both NP length (3, 6 µm) and density (12, 6, 4, 3, 2 and 1.5 µm center-to-center spacing) inside the unexplored geometry gap marked in Fig. 1. For this purpose, several 250 × 250 µm2 arrays of vertical polymeric NPs were made with these specific features. The fabrication time of the different arrays ranges from few tens of seconds to 40 min (see SI Table S2). It has to be noted that despite the serial nature of the direct laser writing process, the fabrication time is reasonable even for dense arrays, which reinforces its character as a rapid prototyping technology.
Arrays with the same NP length, but different NP densities, were fabricated within the same sample, so that cell studies could be performed in parallel for several conditions. In Fig. 2, we show scanning electron microscopy (SEM) images of arrays of 3 µm-long NPs at the full range of spacings tested in the cell studies described in the following. Figure 2A exhibits an overview of a 250 × 250 µm2 array of NPs achieved by TPS. The inset corresponds to an enlarged and tilted view of the same array. Figure 2B–G represent an enlarged view of several arrays with specific center-to-center spacing of 1.5, 2, 3, 4, 6 and 12 µm respectively. In SI section S1, SEM images of both NP lengths at different densities are shown (SI Fig. S1-2) along with statistical length measurements performed for both sample types (SI Table S3).
Cell adhesion on NPs
Fibroblasts (NIH3T3) were grown on the NP arrays created by 3D DLW and cell adhesion on this new range of geometries was first evaluated by SEM. The SEM images in Fig. 3A provide an overview of NIH3T3 cell morphology on NPs of increasing density. Starting at 12 µm spacing (i), the cell morphology seems unaltered when comparing to the cells on the NP-free area in the upper part of the image, but going across 4 µm (ii), 3 µm (iii), 2 µm (iv) and finally 1.5 µm (v) spacing, the cell morphology is clearly changing (see SI Figure S2 for a quantitative analysis).
When inspecting zoom-ins of single cells on spacings 12 µm (B), 4 µm (C) and 1.5 µm (D), the type of interface also seems to gradually change from the cells having a large contact area with the flat substrate between NPs on the lowest density and to adhesion only at the upper parts of the NPs on the highest density. The cell interface thus follows the trend observed also on thinner polymeric6 or silicon38 nanopillars as well as on indium arsenide39 or gallium phosphide40 nanowires.
The cell-NP interface was furthermore visualized through fluorescent staining of the membrane and cytosol in live NIH3T3 cells (SI Figure S3), which confirmed that a tight interface is formed through plasma membrane deformation around each NP under the cell.
Cytoskeletal Remodeling
To reveal the effect of the tight interface on the cytoskeleton, the actin filaments were visualized through immunostaining. In Fig. 4A, the transition from the NP-free area and onto 3 µm-spaced NPs is shown and it is clear that the normal cytoskeletal organization with long parallel fibers is disturbed. From the closer look at a single cell on NPs in Fig. 4B, the cause of the disturbance is clear, as the actin filaments are seen to tightly wrap each NP both under the cell and along the cell edges. This actin-NP colocalization is even observed on very high densities such as 2 µm spacing (C). However, the effect is less prominent on lower densities such as 6 µm (D) and 12 µm (E) spacing, where the overall cytoskeletal structure appears preserved although a few cases of colocalization with NPs are seen. This is in good agreement with observations for stem cells on a PDMS NP density gradient, where the cytoskeletal arrangement was found to only be altered below 5.6 µm spacing24. In addition to being dependent on the NP spacing, the remodeling of the cytoskeletal structure in favor of colocalization with NPs seems to also increase with NP length (see SI Figure S4). The kind of actin filament colocalization observed here has also been documented with HeLa cells on SU-8 NPs6 and may therefore not be specific to the cell type and material used in the present paper.
Cell Settling Height
From the SEM images in Fig. 3, it is evident that cells settle very differently and deform to different extents around the NP depending on the spacing of these. The difference in cell perturbation and immediate nanotopography seen by each cell could thus potentially influence cell behavior. Furthermore, different types of cellular applications require different types of interfaces, so understanding and predicting cell settling as a function of nanostructure geometry is highly desirable for appropriate design of nanostructure arrays. To this end, we have previously developed a theoretical tool, the Cell Interface with Nanostructure Arrays (CINA) model, which predicts the cell settling height as a function of nanostructure density, length and diameter31, 39. So far, the CINA model has been successfully applied for nanostructure diameters of ≤500 nm and here we extend the model to the present structures with diameters of ~750 nm (see SI section S5).
Figure 5A shows the free energy difference, ΔGbottom-top, between a cell deforming and contacting the flat substrate between NPs (‘bottom’) and a cell settling at the very tips of the NPs (‘top’) as a function of NP length and density (fixed diameter = 750 nm). For negative values of ΔGbottom-top, ‘bottom’ settling is energetically favorable and for positive values of ΔGbottom-top, ‘top’ settling is favorable. Along the light blue line marking ΔGbottom-top = 0, the two states are equally probable and the corresponding density is the so-called ‘crossover density’ for the given combination of NP length and diameter. The combinations of density and length investigated in the present paper have been marked and it is seen that for a NP length of ~3 µm, the spacings 12–4 µm are below the crossover density, and spacings 2–1.5 µm are above, while a spacing of 3 µm corresponds exactly to the predicted crossover density (11 NPs/100 µm2). For a NP length of ~6 µm, a spacing of 4 µm corresponds to the predicted crossover density (6 NPs/100 µm2), while spacings 3–1.5 µm are all above.
To verify these predictions, the extracellular space was stained with a cell-impermeable dye to reveal the distance between the cells and the flat substrate between NPs. Representative confocal side views of cells are shown in Fig. 5B for glass (i) and for 3 µm-long NPs with increasing density (4 µm to 1.5 µm spacing). The observed transition from a pure ‘bottom’ state (ii), over mixed settling (iii) to a pure ‘top’ state (iv, v) is in good accordance with the CINA model prediction. Figure 5C and D show the average cell settling heights measured for the different NP spacings with NP lengths 3 µm or 6 µm, respectively. We have previously defined a cell settling height of 1 µm to mark the border between ‘bottom’ and ‘top’ settling (including partly deformed states) and the transition is seen to happen between 4 and 3 µm spacing for 3 µm length, whereas it is already happening at 4 µm spacing with 6 µm-long NPs, both as predicted by the CINA model. A generic predictive tool for the extended CINA model is found in SI Figure S6.
Guiding of cell growth using NP arrays
The tight interface between NIH3T3 cells and NPs observed with SEM and fluorescence imaging of the cell membrane and actin filaments could be beneficial for guiding of cell growth. To evaluate the cell alignment potential of the polymeric NPs, fluorescence overview images of NIH3T3 cells on NPs (Fig. 6A) were analyzed to extract the orientation of the major axis of single cells with respect to the NP pattern (Fig. 6B).
The distributions of cell orientations have been plotted for NP lengths 3 µm and 6 µm, respectively, in Fig. 6B and C. For the NP-free control (glass), the median of the distribution is close to 22.5° as expected for a random orientation. For the shorter NPs (Fig. 6C), the distributions remain broad and quite similar to glass until the highest density (1.5 µm spacing), where a narrowing and clear shift towards alignment with the pattern (0°) is seen. For the longer NPs (Fig. 6D), this shift happens gradually starting from 4 µm spacing and alignment is already efficient on 2 µm spacing. The corresponding histograms are found in SI section S7. It is noteworthy that alignment on the diagonal (45°) is not observed to the same extent, which suggests that the cell filopodia preferably follow the direction of shorter NP spacing as also observed for neurites on an anisotropic micropillar array41.
Increasingly efficient cell alignment has also been demonstrated on micron-wide polymeric lines with decreasing spacing for both endothelial7 and NIH3T334 cells. However, in addition to NP spacing, the NP length is also found to have a profound effect on cell alignment efficiency. In fact, cell alignment efficiency appears to be correlated with cell settling height, when the tendencies of the data in Figs 5 and 6 are compared. Thus, cell settling states where cells are only in contact with the NPs, and preferably only the very tips of these, seem to promote cell alignment. Such clear guiding at the tips was also observed with SEM, where even outgrowths of cells mainly adhering on the flat substrate next to the NP area were seen to climb and be guided at the tips of the NPs (SI Figure S8). This is in good agreement with the thorough study by Bucaro et al. of cell alignment versus pillar array geometry, where cell alignment was shown to be very efficient for cells adhering only at the tips of both silicon and polymeric pillars with spacings in the range 2 µm-1.5 µm38. However, they found that the effect wears off again towards even higher pillar densities, so there might be an upper limit to the alignment-promoting effect of a high NP density.
Since cell alignment efficiency can thus be linked directly to the cell settling height, it is possible to design an optimized NP array for the desired tuning of cell alignment through theoretical predictions of the cell settling. We therefore envision that the combination of the CINA model with the flexibility of the 3D DLW demonstrated in the present paper holds the potential of immensely improving the use of polymeric structures for cell guiding.
Conclusion
Here, we have demonstrated that 3D DLW can be used for fast and flexible prototyping of polymeric NPs from PETIA, which allowed us to systematically study the effect of NP array geometry (density and length) on the behavior of NIH3T3 cells. We have shown that the polymeric NPs generally provide a biocompatible environment for cell adhesion and sustained cell growth, and that the cells form a tight interface with the NPs through both direct membrane adhesion and actin remodeling around the NPs. As a consequence of this tight interaction, the cell morphology, settling height and alignment with the NPs can be tuned by changing the NP array geometry. In fact, the cell settling height, which can be predicted by an extended version of our previously published CINA model, appears to correlate with the cell alignment efficiency on a given NP array, with cells adhering only to the tips of the NPs being more efficiently aligned with the NP pattern. Thus, in addition to an increased understanding of cell behavior as a function of NP array geometry, the combination of the CINA model with the flexibility of the 3D DLW form a potent tool for designing future polymeric NP arrays for improved cell guiding.
Experimental Section
Fabrication of vertical NPs by 3D DLW
NPs were fabricated using a femtosecond laser source (Chameleon Ultra II, 140 fs @ 800 nm, from Coherent) combined with a TeemPhotonics microfabrication 3D system as described previously42. The formulation contained 3% w/w of photoinitiator (Lucirin-TPO from BASF, Ludwigshafen, Germany) in monomer (pentaerythritol triacrylate (PETIA), from Sigma-Aldrich) and a few hundred microliters were extracted with a Pasteur pipette and dropped on a glass coverslip. The laser beam was focused into the photoresist via an objective lens (40x, NA: 0.65) and typical fabrication was performed with an optimized exposure time and laser power of 10 ms and 10 mW, respectively (see SI Fig. S1-1). After laser exposure, the sample was immersed in ethanol (analytical grade, Sigma-Aldrich) for 15 min to remove the non-polymerized material. Finally, samples were dried with nitrogen and stored in glass vials until use.
Cell culture
Flp-in 3T3 cells (Invitrogen) with a gene coding for a membrane-anchored SNAP-tag at the Flp-in site (will be referred to as NIH3T3) were maintained at 37 °C, 5% CO2, and >95% humidity in DMEM/F-12 Glutamax-I medium (Gibco) supplemented with 10% calf serum (Sigma) and 100 µg/ml hygromycin B (Invitrogen).
Interfacing of cells with NPs
Prior to cell interface, the NP array was washed for 2 × 30 min. in excess MQ H2O to remove any residual chemicals, sterilized with 70% EtOH and washed 3x with cell medium. The NIH3T3 cells were added dropwise to the NP array at a density of 60,000 cells/cm2 and grown in medium supplemented as above for 24 h prior to analysis.
SEM imaging
The NIH3T3 cells were fixed with 4% paraformaldehyde (PFA, Sigma) and dehydrated with methanol as previously described43. The samples were then sputter-coated with 5 nm Au and SEM images were collected using a JEOL JSM-6320F with 10 kV acceleration voltage. Cell-free imaging of the NPs was performed directly using a FEI-Quanta 400 model with 15 kV acceleration voltage.
Immunostaining of actin
The NIH3T3 cells were fixed with 4% PFA for 1 h at room temperature (RT) and then permeabilized and blocked with 0.25% Triton X-100 (BioChemika) and 1% bovine serum albumin (Sigma) for 20 min. prior to incubation with 2% rhodamine-phalloidin (Molecular Probes) for 40 min. at RT.
Fluorescence imaging
Both live and immunostained NIH3T3 cells were imaged with an inverted confocal microscope (Leica TCS SP5) using a 63x magnification, water-immersion objective with numerical aperture 1.2. For 12–3 µm spacing, the sample could be imaged from below, but it was inverted for imaging on 2–1.5 µm spacing.
Cell settling height study
NIH3T3 cells were imaged in 100 µM ATTO647 (ATTO Technology, Inc., New York, USA) with an inverted confocal microscope (see above). The distance between the apical side of the cell and the flat substrate between NPs was measured using vertical cross sections through z-stacks of the confocal images (“side views”) in ImageJ software. Typically, >10 cells were analyzed per condition and replicate.
CINA model calculations
The free energy difference between the ‘bottom’ and ‘top’ cell settling state was calculated from ref. 31:
where ΔA c,bottom-top is the extra surface contact area gained from deforming the membrane along the NPs and contacting the flat substrate, and ΔO bottom-top and ΔG b,bottom-top are the extra exposed surface area and bending energy, respectively, associated with the deformation around the NPs. w is the specific adhesion energy per unit area, which was adjusted to 1.2·10−17 J/µm2 (see SI section S5), and σ is the surface tension, which was fixed to 2.4·10−17 J/µm2 as previously. The bending modulus, κ, which enters into the ΔG b,bottom-top term, was fixed to 9·10−19 J as previously31.
Cell alignment analysis
The cytosol of live NIH3T3 cells was stained with 3 μM calcein acetoxymethyl (Molecular Probes). CellProfiler software (version 2.0, Massachusetts Institute of Technology, Cambridge, MA) was used to identify each cell from the cytosolic live-cell signal (see above) and then calculate the orientation of the major axis of each cell with a horizontal orientation as the reference. Data stem from at least two independent experiments and ~60 cells were typically analyzed per condition. Cell orientation distributions for different NP array geometries were compared using Student’s unpaired t test with a two-tailed distribution, where a p-value below 0.05 was considered a significant difference.
Data availability
The datasets generated during the current study are available from the corresponding author on reasonable request.
References
Dalby, M. J., Gadegaard, N. & Oreffo, R. O. C. Harnessing nanotopography and integrin-matrix interactions to influence stem cell fate. Nat. Mater. 13, 558–569, doi:10.1038/nmat3980 (2014).
Nikkhah, M., Edalat, F., Manoucheri, S. & Khademhosseini, A. Engineering microscale topographies to control the cell-substrate interface. Biomaterials 33, 5230–5246, doi:10.1016/j.biomaterials.2012.03.079 (2012).
Bonde, S. et al. Exploring Arrays of Vertical One-dimensional Nanostructures for Cellular Investigations. Nanotechnology 25, 362001, doi:10.1088/0957-4484/25/36/362001 (2014).
del Campo, A. & Arzt, E. Fabrication approaches for generating complex micro- and nanopatterns on polymeric surfaces. Chem. Rev. 108, 911–945, doi:10.1021/cr050018y (2008).
Teo, A. J. T. et al. Polymeric Biomaterials for Medical Implants and Devices. ACS Biomater. Sci. Eng. 2, 454–472, doi:10.1021/acsbiomaterials.5b00429 (2016).
Beckwith, K. S., Cooil, S. P., Wells, J. W. & Sikorski, P. Tunable high aspect ratio polymer nanostructures for cell interfaces. Nanoscale 7, 8438–8450, doi:10.1039/c5nr00674k (2015).
Yang, J., Rose, F. R. A. J., Gadegaard, N. & Alexander, M. R. A High-Throughput Assay of Cell-Surface Interactions using Topographical and Chemical Gradients. Adv. Mater. 21, 300–304, doi:10.1002/adma.200801942 (2009).
Chen, Z., Atchison, L., Ji, H. & Leong, K. W. Nanograting Structure Promotes Lamellipodia-Based Cell Collective Migration and Wound Healing. Conf. Proc. IEEE Eng. Med. Biol. Soc., 2916–2919, doi:10.1109/EMBC.2014.6944233 (2014).
Wang, J. R. et al. Nanotopology potentiates growth hormone signalling and osteogenesis of mesenchymal stem cells. Growth Horm. IGF Res. 24, 245–250, doi:10.1016/j.ghir.2014.10.003 (2014).
Cha, K. J., Hong, J. M., Cho, D.-W. & Kim, D. S. Enhanced osteogenic fate and function of MC3T3-E1 cells on nanoengineered polystyrene surfaces with nanopillar and nanopore arrays. Biofabrication 5, 025007, doi:10.1088/1758-5082/5/2/025007 (2013).
Badique, F. et al. Directing nuclear deformation on micropillared surfaces by substrate geometry and cytoskeleton organization. Biomaterials 34, 2991–3001, doi:10.1016/j.biomaterials.2013.01.018 (2013).
Davidson, P. M. et al. Topographically induced self-deformation of the nuclei of cells: dependence on cell type and proposed mechanisms. J. Mater. Sci.: Mater. Med. 21, 939–946, doi:10.1007/s10856-009-3950-7 (2010).
Davidson, P. M., Özçelik, H., Hasirci, V., Reiter, G. & Anselme, K. Microstructured Surfaces Cause Severe but Non-Detrimental Deformation of the Cell Nucleus. Adv. Mater. 21, 3586–3590, doi:10.1002/adma.200900582 (2009).
Unadkat, H. V. et al. An algorithm-based topographical biomaterials library to instruct cell fate. Proc. Natl. Acad. Sci. USA 108, 16565–16570 (2011).
van Hoorn, H. et al. The nanoscale architecture of force-bearing focal adhesions. Nano Lett. 14, 4257–4262, doi:10.1021/nl5008773 (2014).
Ghibaudo, M., Di Meglio, J.-M., Hersen, P. & Ladoux, B. Mechanics of cell spreading within 3D-micropatterned environments. Lab Chip 11, 805–812, doi:10.1039/C0LC00221F (2011).
Park, J. et al. Directed migration of cancer cells guided by the graded texture of the underlying matrix. Nat. Mater. 15, 792–801, doi:10.1038/nmat4586 (2016).
Klein, F. et al. Two-Component Polymer Scaffolds for Controlled Three-Dimensional Cell Culture. Adv. Mater. 23, 1341–1345, doi:10.1002/adma.201004060 (2011).
Chen, W., Sun, Y. & Fu, J. Microfabricated Nanotopological Surfaces for Study of Adhesion-Dependent Cell Mechanosensitivity. Small 9, 81–89, doi:10.1002/smll.201201098 (2013).
Kuo, C.-W. et al. Polymeric nanopillar arrays for cell traction force measurements. Electrophoresis 31, 3152–3158, doi:10.1002/elps.201000212 (2010).
Pan, Z. et al. Control of cell nucleus shapes via micropillar patterns. Biomaterials 33, 1730–1735, doi:10.1016/j.biomaterials.2011.11.023 (2012).
Sochol, R. D., Higa, A. T., Janairo, R. R. R., Li, S. & Lin, L. Unidirectional mechanical cellular stimuli via micropost array gradients. Soft Matter 7, 4606–4609 (2011).
Kulangara, K. et al. The effect of substrate topography on direct reprogramming of fibroblasts to induced neurons. Biomaterials 35, 5327–5336, doi:10.1016/j.biomaterials.2014.03.034 (2014).
Ahn, E. H. et al. Spatial control of adult stem cell fate using nanotopographic cues. Biomaterials 35, 2401–2410, doi:10.1016/j.biomaterials.2013.11.037 (2014).
Kim, H. S. & Yoo, H. S. Differentiation and focal adhesion of adipose-derived stem cells on nano-pillars arrays with different spacing. RSC Adv. 5, 49508–49512, doi:10.1039/C5RA07608K (2015).
Viela, F., Granados, D., Ayuso-Sacido, A. & Rodríguez, I. Biomechanical Cell Regulation by High Aspect Ratio Nanoimprinted Pillars. Adv. Funct. Mater. 26, 5599–5609, doi:10.1002/adfm.201601817 (2016).
Jin, M. et al. Pi-conjugated sulfonium-based photoacid generators: an integrated molecular approach for efficient one and two-photon polymerization. Polym. Chem. 5, 4747–4755 (2014).
Gomez, L. P. C. et al. Rapid Prototyping of Chemical Microsensors Based on Molecularly Imprinted Polymers Synthesized by Two-Photon Stereolithography. Adv. Mater. 28, 5931–5937, doi:10.1002/adma.201600218 (2016).
Röhrig, M., Thiel, M., Worgull, M. & Hölscher, H. 3D direct laser writing of nano- and microstructured hierarchical gecko-mimicking surfaces. Small 8, 3009–3015, doi:10.1002/smll.201200308 (2012).
Jang, D., Meza, L. R., Greer, F. & Greer, J. R. Fabrication and deformation of three-dimensional hollow ceramic nanostructures. Nat. Mater. 12, 893–898, doi:10.1038/nmat3738 (2013).
Buch-Månson, N. et al. Towards a Better Prediction of Cell Settling on Nanostructure Arrays-Simple Means to Complicated Ends. Adv. Funct. Mater. 25, 3246–3255, doi:10.1002/adfm.201500399 (2015).
Gurtner, G. C., Werner, S., Barrandon, Y. & Longaker, M. T. Wound repair and regeneration. Nature 453, 314–321, doi:10.1038/nature07039 (2008).
Łopacińska, J. M. et al. Cell motility, morphology, viability and proliferation in response to nanotopography on silicon black. Nanoscale 4, 3739–3745, doi:10.1039/c2nr11455k (2012).
Kim, D.-H. et al. Mechanosensitivity of fibroblast cell shape and movement to anisotropic substratum topography gradients. Biomaterials 30, 5433–5444, doi:10.1016/j.biomaterials.2009.06.042 (2009).
Maruo, S., Nakamura, O. & Kawata, S. Three-dimensional microfabrication with two-photon-absorbed photopolymerization. Opt. Lett. 22, 132–134 (1997).
Kim, P., Adorno-Martinez, W. E., Khan, M. & Aizenberg, J. Enriching libraries of high-aspect-ratio micro- or nanostructures by rapid, low-cost, benchtop nanofabrication. Nature Protocols 7, 311–327 (2012).
Mendonca, C. R., Correa, D. S., Baldacchini, T., Tayalia, P. & Mazur, E. Two-photon absorption spectrum of the photoinitiator Lucirin TPO-L. Applied Physics A 90, 633–636, doi:10.1007/s00339-007-4367-0 (2008).
Bucaro, M. A., Vasquez, Y., Hatton, B. D. & Aizenberg, J. Fine-Tuning the Degree of Stem Cell Polarization and Alignment on Ordered Arrays of High-Aspect-Ratio Nanopillars. ACS Nano 6, 6222–6230, doi:10.1021/nn301654e (2012).
Bonde, S. et al. Tuning InAs Nanowire Density for HEK293 Cell Viability, Adhesion, and Morphology: Perspectives for Nanowire-Based Biosensors. ACS Appl. Mater. Interfaces 5, 10510–10519, doi:10.1021/am402070k (2013).
Persson, H., Li, Z., Tegenfeldt, J. O., Oredsson, S. & Prinz, C. N. From immobilized cells to motile cells on a bed-of-nails: effects of vertical nanowire array density on cell behaviour. Sci. Rep. Vol. 5 18535 (2015).
Park, M. et al. Control over Neurite Directionality and Neurite Elongation on Anisotropic Micropillar Arrays. Small 12, 1148–1152, doi:10.1002/smll.201501896 (2016).
Spangenberg, A. et al. Enhancement of Two-Photon Initiating Efficiency of a 4,4′-Diaminostyryl-2,2′-bipyridine Derivative Promoted by Complexation with Silver Ions. Macromolecules 45, 1262–1269 (2012).
Berthing, T. et al. Intact Mammalian Cell Function on Semiconductor Nanowire Arrays: New Perspectives for Cell-Based Biosensing. Small 7, 640–647, doi:10.1002/smll.201001642 (2011).
Acknowledgements
The authors gratefully acknowledge Stephan Knopf for help and discussion with SEM experiments. The authors also acknowledge financial supports by Agence Nationale de la Recherche (ANR Nanoquenching, contract number 10PDOC-009 01 and ANR 2PhotonInsight) and the Region Council of Alsace, the Lundbeck Foundation, the Danish Council for Strategic Research (ANaCell project), and UNIK Synthetic Biology, funded by the Danish Ministry for Science, Technology and Innovation.
Author information
Authors and Affiliations
Contributions
A.S. and L.P.C.G. fabricated the polymeric NPs and N.B.-M. designed and carried out all cell experiments and theoretical modeling. N.B.-M. and A.S. co-wrote the manuscript, which was reviewed by K.L.M., O.S. and J.-P.M.
Corresponding authors
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Buch-Månson, N., Spangenberg, A., Gomez, L.P.C. et al. Rapid Prototyping of Polymeric Nanopillars by 3D Direct Laser Writing for Controlling Cell Behavior. Sci Rep 7, 9247 (2017). https://doi.org/10.1038/s41598-017-09208-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-017-09208-y
This article is cited by
-
Biointerface design for vertical nanoprobes
Nature Reviews Materials (2022)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.