Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Variation in Tree Species Ability to Capture and Retain Airborne Fine Particulate Matter (PM2.5)

Abstract

Human health risks caused by PM2.5 raise awareness to the role of trees as bio-filters of urban air pollution, but not all species are equally capable of filtering the air. The objectives of this current study were: (1) to determine the foliar traits for effective PM2.5-capture and (2) explore species-to-species differences in foliar PM2.5-recapture capacity following a rain event. The study concluded that overall, the acicular needle shape made conifers more efficient with PM2.5 accumulation and post-rainfall recapture than broadleaved species. The foliar shape and venation of broadleaved species did not appear to influence the PM2.5 accumulation. However, the number of the grooves and trichomes of broadleaved species were positively related to foliar PM2.5 accumulation, suggesting that they could be used as indicators for the effectiveness of tree PM2.5 capture. Furthermore, the amount of PM2.5 removal by rainfall was determined by the total foliar PM2.5. Not all PM2.5 remained on the foliage. In some species, PM2.5 was resuspended during the growing season, and thus reduced the net particular accumulation for that species. These findings contribute to a better understanding of tree species potential for reducing PM2.5 in urban environments.

Introduction

PM2.5 has raised severe public health concerns as particles easily penetrate the pulmonary alveoli1 and pollution issues related to it have become increasingly severe as a result of global climate change. Periodic PM2.5 pollution episodes in cities are more likely to develop in winter in the Northern Hemisphere because of increased air temperature as well as more frequent atmospheric inversions under the background of global climate change2. Moreover, summer episodes may also increase PM2.5 concentrations due to an increased in the likelihood of stationary air masses3, intense secondary aerosol formation4,5,6 and forest fires7,8,9. Cessation of vehicular or industrial PM2.5 emissions is not economically or functionally practical in highly urban areas such as Beijing. Therefore, cities will have to develop multiple measures to mitigate PM2.5 concentrations. Tree planting (a.k.a. “greening”) has been suggested as one method to reduce PM2.5 in urban areas because these measures would effectively complement air pollution mitigation10. Foliage acts as a bio-filter of air pollution11 and improve air quality12 due to the leaves’ rough texture and large contact area. Vegetated greenbelts (i.e., areas of natural or planted herbaceous and non-herbaceous vegetation) can effectively reduce the dust and filter the suspended particles that would otherwise impact urban areas13. Several previous studies have evaluated the amount of PM2.5 removal from urban air by vegetation. For example, concentrations of PM2.5 have been shown to decrease by 9% in woodlands immediately adjacent to urban areas14. On a larger scale, trees annually removed approximately 300 metric tons of air pollutants from Christchurch, New Zealand15. In Beijing, the trees removed 1,261 metric tons of pollutants, 772 metric tons of which was PM10 16. Studies conducted in the UK indicated that planting trees on one-fourth of the available urban area can reduce PM10 concentrations by 2 to 10%17. Overall, the findings suggest that urban vegetation have a direct and positive effect on human health by reducing PM2.5. Thus, tree planting can be considered pollution mitigation measure in a variety of urban settings. However, open space suitable for tree greening programs is limited in cities. Therefore, if urban vegetation is to be employed as a measure for controlling the air pollution, the most efficient species and tree spacing should be used to maximize PM2.5 uptake by vegetation. The ability to identify the most efficient vegetation attributes and species for capturing PM2.5 is important because that will provide a basis for selecting plants to improve air quality in vulnerable areas.

Unfortunately, current studies on foliar PM2.5 capture efficiency are inconclusive. Significant differences have been reported between and within modelling and experimental studies. A number of such studies were conducted to evaluate deposition velocity (Vd, cm s−1)18, deposition amount (mg cm−2 or μg cm−2)19, 20, magnetic deposition velocity (cm−1)21, particle number (mm−2)22, and particle cover area (%)23. For example, PM10 deposition velocities (Vd) on vegetation varied from ~0.01 to ~10 cm s−124, but models were not very accurate at predicting Vd within a species. Simulated Vd of 1 μm diameter particles on Picea abies were calculated to be 0.02 cm s−125, but measured rates of Vd were 0.55 cm s−126, a 25-fold difference. Differences between modeled and measured Vd can be attributed to uncertainties associated different physical and chemical processes involved in tree-atmosphere interactions such as PM2.5 capture model sensitivity to different plant boundary layer parameters, and to the importance of initial conditions27. Measured particle Vd are not only dependent on the measurement methods17 but also on a number of other factors such as particle size and density28, concentrations of other pollutant (e.g., ozone)29, meteorological conditions (e.g. precipitation affecting particle removal from the leaves30 and wind31 affecting resuspension and boundary layer heights32) and the tree canopy morphology30. Although foliar PM2.5 deposition varies with in-situ conditions, the foliar PM2.5 accumulation is often just considered to be a species-specific33. An examination foliar PM2.5 retention ability for different species under similar conditions is necessary to better rank tree species efficiency for capturing PM2.5.

Given that the surface properties of objects are known to influence particle immobilization34, plant species differ in their ability to scavenge dust-laden air24, 34. The dust-retention abilities of vegetation depend on several factors including canopy type, leaf and branch density, and leaf micromorphology (e.g., roughness, trichomes and wax)18, 19, 31, 33, 35,36,37,38,39. Conifers are considered to be more effective in PM10 capture than broadleaved species34 and evergreen conifers have the potential to accumulate pollutants throughout the year. Within the broadleaved species, rough leaf surfaces are more efficient in capturing PM2.5 than those with smooth leaf surfaces31, 40. Within species cultivar, leaf surface property variation can also impact PM2.5 capture. Large-scale sampling must be conducted to quantify the relationships between species traits and PM2.5 capturing capacity.

Although it is understood that the temporary retention of particles by urban trees can reduce atmospheric PM2.5 concentrations, the effectiveness of vegetation as a long-term alternative to other measures is still under debate24. Most particles are retained on the plant surface and subsequently removed from the canopies by resuspension to the atmosphere through rainfall and leaves fallen to the ground30, 41. Particle fate is also impacted by other factors, including canopy characteristics, micrometeorological conditions, particle size and leaf morphology18, 31, 42, 43. However, to date, no study has systematically compared interspecies effectiveness in capturing and retaining PM2.5. It is not applicable to deduce the foliar PM2.5 deposition and resuspension from PM10 studies due to the weak correlations between the PM size fractions44.

Therefore, the aim of this study is to (1) quantify the relationship between PM2.5 accumulation and the leaf macromorphology and micromorphology using a large sampling population and (2) explore the differences in PM2.5 retention under rainfall conditions by leaves of different species. To our knowledge, this is the first study to quantify the relationship between leaf macromorphology and foliar PM2.5 capture. The findings from this study have practical implications for urban tree species selection targeting air pollution. Moreover, the results presented here will assist urban planners to evaluate the potential capacity of PM2.5 removal from the long term, large scale perspective.

Results

Foliar PM2.5 accumulation of tree species

Atmospheric PM2.5 captured on the leaves of urban trees varied among species and seasons (Fig. 1, see also Supplementary Table S1). Coniferous species predominately contained the largest accumulation (>20 μg cm−2) of PM2.5 were predominantly coniferous species (Fig. 1b). Conversely, the four most efficient broadleaved PM2.5-retention species were Catalpa specieosa, Ulmus pumila, Amygdalus triloba and Broussonetta papyrifera, all characterized by leaves covered with dense hairs, whereas the least effective species wereTilia tuan, Armeniaca sibirica and Lonicera maackii, which had smooth leave surfaces.

Tree morphological traits and leaf retention of PM2.5

Acicular (needle-shaped) leaves showed the highest capacity to capture PM2.5 (one-way ANOVA, P = 0.01, Fig. 2a), followed by lanceolate leaves. No significant differences (P = 0.09) in the PM2.5 amount per unit leaf area were observed between the different venation patterns of the studied species, although trinervious veins exhibited favourable PM2.5 capturing effect (Fig. 2b).

Digitized morphological features were extracted from leaf images (Fig. 3). The groove ratio (groove area/total leaf area) ranged from ~3 to 25% across all species. Trichomes are the fine outgrowths (including various types of hairs) or appendages on plants. Among the examined species, 53% had no trichomes, (i.e., trichome density (LHave = 0). The remaining species had trichomes with varying morphologies and densities including sparsely distributed trichomes (LHave = 5.6 ± 1.13 mm−2) or densely covered trichomes (LHave = 19.9 ± 5.20 mm−2). The stoma densities ranged between 40 and 140 mm−2 and diameters ranging between 10 and 25 μm.

Across species, the highest rates of PM2.5 capture were observed on foliage with micromorphological structures that included dense grooves (Fig. 3a–h) and epicuticular trichomes (Fig. 3q–t). Armeniaca sibirica (Fig. 3n) and Phyllostachys propinqua (Fig. 3i) both had pointy, protrusive structures. However, A. sibirica had grooves around the protrusion and was able to capture more PM2.5 than P. propinqua that lacked these grooves. Protrusions that were flattened were not as efficient at retaining PM2.5 (Fig. 3i–p) compared to protrusions that were pointy. However, the presence of stoma did not necessarily lead to a larger capacity for PM2.5 capture (Fig. 3u–x).

A correlation analysis indicated that the amount of captured PM2.5 trapped particulate matter was positively correlated with the total epicuticular trichomes (R = 0.69, Fig. 4a) and the groove density (Fig. 4b). No relationship was found between foliar PM2.5 accumulation and the stomatal density or diameter.

Removal of PM2.5 from leaf surfaces by simulated rainfall

PM2.5 removal by rainfall was correlated with the amount of the pollutant retained on the leaf before the rainfall simulation (Fig. 5a). This is in consistent with the fact that rainfall scavenging being a first-order process, and dependent on leaf particle concentration45. The PM2.5 retention ability of different species varied significantly (one-way ANOVA, P = 0.03) (Fig. 5b). The average removal rate of the foliar PM2.5 of the examined coniferous species was 60% (SE = 4%) while the removal rate for broadleaf species was 47% (SE = 3%). Platyladus orientalis and Pinus armandii lost up to 86% (SE = 5%) and 66% (SE = 4%) of their foliar PM2.5, respectively. Only Cedrus deodara demonstrated a lower foliar PM2.5 removal rate of 30%. Among the broadleaf species, Eucommia ulmoides and Sophora japonica demonstrated the highest average foliar PM2.5 removal rate of 82% (SE = 4%) and 64% (SE = 4%), respectively. The removing process of PM2.5 from the leaf surface by rainfall fluctuated with time (Fig. 6). It indicated that the removal process was species specific and subject to rainfall duration and species (Fig. 6).

Discussion

Species differences in accumulating PM2.5

The influence of morphological traits on foliar PM2.5 accumulation was reflected by the changes in the sequence along the temporal progression (Fig. 1). For broadleaf species, large area of foliar ultrastructures, such as grooves, trichomes and glands, were exposed and captured the ambient PM2.5 during the process of leaf expansion. The PM2.5-capture capacity of such species is expected to increase as they grow mature. This has been observed in Ginkgo biloba, Ulmus pumila, and Salix babylonica 23. Therefore, a collection of species with different phenology would maximize the PM2.5 trapping effects. Thus, increased biodiversity would extend the period of leaf expansion and maximize PM2.5 capture. On a large scale, conifers had higher rates PM2.5 compared in broadleaved trees in urban environments18. In computer simulation studies, conifers ranked highest in accumulated particulate matter on their foliage46, 47. The capture efficiency differences between the needles and the flat leaves can be expressed by the Stoke’s number31 which describes the relationship between the stopping distance of a particle and the characteristic dimension of an object (m)48. In short, narrow conifer needles have much larger Stoke’s numbers and thus higher capture efficiency. For instance, in the study comparing species including both coniferous and broadleaved trees, the maximum Stoke’s number for the coniferous species was 0.05 while the maximum Stoke’s number for broadleaved species was 0.00001231. Additionally, in principle, more turbulent flow could occur across fine cylinders, like coniferous needles, than across large plates, like broadleaves, leading to the reduced boundary layer thickness of needle leaves. Small individual leaf area49 of needles is another factor for developing thinner boundary layer in comparison with broad leaves. When the wind carrying PM2.5 travels across the leaf, the boundary layer stays relatively stationary and forms a barrier between the surrounding air and the leave surface. Therefore, the thin boundary layer of long narrow needle leaves experienced more potential for PM2.5 contact with the leaf surface. Conifer leaf morphology increased the potential for PM2.5 capture but did not impact PM2.5 release during a rain event as indicated by the high removal ratio (Fig. 5b) under rainfall. Studies on the self-cleaning of leaf surfaces have revealed that epicuticular wax ultrastructures are correlated with the hydrophobic properties of the leaf surfaces and leaf surface PM2.5 50, 51. Therefore, the pine species show greater PM2.5 attenuation capabilities in urban areas, especially in winter when pollution concentrations are the highest and broadleaf tree species are leafless. However, pine species are not recommended to use in heavily polluted areas because they are susceptible to pollutant-induced injuries34, 47 For example, ozone induces visible injury on pine needles52. Sulfur dioxide (SO2) causes foliar necrosis in pine trees53, and aluminium causes nutrient imbalance and structural changes in the pine needles54. Species response to pollutant loading is important for estimating total greening impacts on PM2.5 reduction potential. For example, if a conifer has twice the PM2.5 capture capacity per unit leaf area of a broadleaf tree, but only a third of the leaf area due to pollutant stress, then the broadleaf species would be more effective at capturing particulate matter at the stand level.

Influences of leaf micromorphology on PM2.5 accumulation

For broadleaved species, leaf shape and venation did not have a significant influence on the PM2.5 immobilization because the individual leaves cannot reflect the physical properties of canopy density. Canopy density influences the wind turbulence which has been proposed as a significant explanatory factor for the deposition of particulate matter55, especially for the fine particles. Moreover, canopy density has significant influence over the air PM2.5 concentration56, and thus leads to different PM2.5 deposition on leaves. However, the leaf micromorphology such as the groove area and trichomes (Fig. 3) also significantly influences the PM2.5 deposition. Foliar surface morphology has been observed to have direct effects on the PM2.5 capture by leaves. Specifically, leaf surfaces with grooves or trichomes have a higher capacity for PM2.5 retention than smooth leaves (Fig. 4). This finding is consistent with those of previous studies where the degree of leaf roughness and the number of trichomes in upper and lower epidermis of a leaf determined the species dust retention capacity57, 58. Additionally, an increased roughness due to leaf hairs, scales, glands, furrows and veins, has been found to increase the particulate accumulation33, 43, 59,60,61. This study also found that dense leaf grooves provided an ideal condition for the deep retention of the PM2.5. Foliar trichomes improved the PM2.5 capture capacity of leaves. Species with densely haired leaves, such as Catalpa speciosa, Ulmus pumila and Broussonetia papyrifera were the most effective measured species for retaining PM2.5 (Fig. 4) as indicated by the amount of PM2.5 retention by the leaves after they were fully expanded. The effect of dense trichomes was also reported by other studies. Compared with the adaxial surface, the abaxial leaf surface is less efficient for the deposition of PM2.5 61 due to the lighter micro-roughness of the surface. Therefore, species with abaxial indumentum (a covering of trichomes) were proved more effective in trapping PM2.5 31. For example, the hairy abaxial surface of Platanus occidental is reported to be more efficient at capturing PM2.5 than the adaxial surface40. A previous study44 ranked tree species PM2.5 capture capacity based on visual observation of trichomes occurrence rather than density as was done in this study. The existence of trichomes would not necessarily correlate with the increased foliar PM2.5 retention because sparse hairs had limited PM2.5 retention ability. This was consistent with the SEM statistical results that indicated by pattern of PM2.5 accumulation for species with a trichome density below 20 mm−2 (Fig. 4a). The limited ability of leaves with few trichomes was further evidenced in the SEM images, for species such as Tilia tuan (Fig. 3q). With improved trichome statistics from the detailed SEM images in this study, we were able to refine the previous analysis by developing a numerical relationship between trichomes and foliar PM2.5 amount. Therefore, visual leaf macromorphological traits may not be sufficient for determining a species PM2.5 capture capacity, leaf micromorphological examination may be necessary. This is also the case with the description of foliar roughness represented by groove area ratio.

Stomata size and stomatal density are considered important factors in controlling PM2.5 accumulation62. For example, an indoor high-dose dust-spray experiment observed discernable particulate distribution around the stomas35. However, no significant influence of stomatal charateristics on foliar PM2.5 amount trapping was observed in our study. The complex wind turbulence in the outdoor environment may create changing diffusion conditions leading to the lower exposure doses for the plants and disturbances for the deposition of particulate matters. Therefore, the foliar deposition of particulate matters in the controlled experiment would be more evident than in the outdoor natural environment. Moreover, this might be attributed to the lower stomatal density and stomata size in our samples than those in the studies that observed significant relationship between stomatal features and particles. Another study conducted in Beijing63 observed that leaves with high stomatal density (>189 mm−2) demonstrated significant increase with stomatal density in trapping PM2.5. However, this relationship was absent among species with lower stomatal density. Therefore, stomatal density appears to only increase particle capture when the stomatal density is high. This is proved by the comparison of another pair of studies. Stomatal density was related to foliar accumulation of air contaminant for species with high leaf stomatal density (ranging averagely from 237–757 mm−2)64. By contrast, in another study where the leaf stomatal density ranged from 10.36–38.36 mm−2 in average, no significant relationship was found between foliar particle accumulation and stomatal density65. Also, the stomatal size in our study was low, ranging from 10 to 25 μm. The study that observed similar stomatal size range (14.5–19.9 μm)64 also failed to show consistent relationship between stomata size and foliar air pollutant accumulation. By contrast, this relationship was found in the study where the stomata size ranged from 20 to 192 μm65. The state of stomatal opening is another reason for the inconsistent relationship between stomatal density or stomata size and foliar PM2.5 accumulation. The stomatal density and stomata size does not necessarily stand for the opening size of the stomas. Sensitive to ambient environmental factors, such as light and water status, the stomas can open to different extent, and thus lead to different rates of transpiration which in turn alters relative humidity. Given that relative humidity influences dry deposition velocity, foliar accumulation of PM2.5 capture could be impacted66. Although the particles have been observed to enter the leaf through stomatal openings67, the frequency to which this occurs is unknown. Blockage of stomata with PM could significantly decreased stomatal conductance and gas exchange, which may further influence the water regime, photosynthesis67, and overall plant growth68. Therefore, we believe the entering of PM2.5 through the stomatal openings should be an occasional observation.

Rainfall effect on PM2.5 retention

The across-seasonal comparisons of the same species indicated that the foliar PM2.5 accumulation did not necessarily increase with time (Fig. 1), which may have been caused when the maximum loading capacity of leaves was reached3, 23, 58. For example, plant leaves reached their maximum PM2.5 loading capacities after 26 days of no rainfall in Guangzhou, China69. Therefore, the accumulation of PM2.5 on leaves is not linearly related to exposure duration. Foliar PM2.5 accumulation is dynamic. Leaves may capture PM2.5 for some time before a wind event releases the material back into the air, or a rain event washes the material off of the leaf. Therefore, the amount of foliar PM2.5 at the end of the examined period cannot be interpreted as a representation of the total mass of foliar PM2.5 accumulation during the corresponding period (e.g., growing season).

This study examined the differences in rainfall removal of foliar PM2.5 among species (Fig. 6b). Although the kinetic energy of rainfall is the predominant factor in the foliar washing process70, leaf surfaces features like wax layer, trichomes and other protrusions can result in different contact angle between water droplet and different leaf surfaces71. These factors create different water-repellent performances between species72. Moreover, the hydraulic pressure change due to the impaction of raindrop can change the contact angle and thus the leaf wettability73 which could also contribute to the PM2.5 rainfall removal patterns. Measurements taken immediately after a rainfall indicated that once deposited, coarse and fine particles were not easily washed off of the leaves18. Therefore, modelling the associated processes throughout the entire season to obtain an accurate estimate of the amount of PM2.5 immobilized by urban trees is necessary.

The amount of PM2.5 accumulated on a leaf is therefore a combination of multiple factors, including species factors and meteorological condition24. The amount of washed-off PM2.5 was not significant related to the leaf morphological traits but was significantly related to the total foliar PM2.5 accumulation. This result suggests that mechanisms that determine rainfall loss of foliar retention of PM2.5 may apply equally to broadleaf and coniferous species.

The present study demonstrates the PM2.5 attenuation dynamics of different species and provides insights for species selection for PM2.5 pollution mitigation in urban areas. Nevertheless, trees may also act as PM2.5 sources by emitting biogenic volatile organic compounds (BVOCs)74 and enhancing local PM2.5 concentration under dense planting schemes75. BVOCs can react with nitrogen oxides (NOx) to form O3 and secondary organic aerosol (SOA)76. Therefore, the release of BVOCs from vegetation may pose a problem if the planted species are high emitters77. BVOC emissions can vary widely among tree species and even within species78, 79, depending on physiological and environmental factors76. For instance, in Mediterranean areas, where summer is usually characterized by high temperature and little precipitations, the potential for BVOC and ozone formation is high78. Therefore, BVOC emissions should be considered during the design of urban green spaces and trees with high BVOC emissions should be avoided to achieve the improved net air pollution reduction benefits from the tree planting. Although PM2.5 dispersion was not the focus in the present study, the release of deposited PM2.5 from foliage should be considered. A simulation of tree and shrub effects on particle dispersion suggested that particulate matter concentrations would be highest on streets with a high density of trees80. Based on dispersion conditions, different planting configurations were showed to have varied abilities to mitigate airborne PM2.5 concentrations44. Therefore, to optimize the benefits of trees in various urban settings, the pros and cons of different taxa in relation to PM2.5 pollution must be considered81.

In conclusion, needle-leaved coniferous species are more efficient at removing atmospheric PM2.5 and have a higher potential than broadleaved species to recapture PM2.5 after rain events. For broadleaved species, macromorphological traits, such as leaf shape and venation, do not have a significant influence on foliar PM2.5 retention, whereas micromorphological traits, such as grooves and trichomes, are strongly correlated with foliar PM2.5 accumulation and can be used as effective species selection criteria. The temporal process of foliar PM2.5 wash-off is highly species-specific, which implies the influence of rainfall duration and intensity on the ability of leaves to accumulate PM2.5. A cross-season comparison showed positive and negative increases in PM2.5, which reflected the varying influence of resuspension on the amount of foliar PM2.5 accumulation. These findings indicate that the accumulation-suspension cycle of urban trees must be further investigated to accurately evaluate accurately the long-term potential bio-filtration capacity of different trees.

Methods and Materials

Leaf-washing experiments for the species comparison

Samples for the leaf-washing experiments were collected on the campus of Beijing Forestry University (40°00′ N, 116°34′ E), Beijing, China, which offers abundant vegetation species within a radius of 500 m. Thus, it is reasonable to assume (for the purpose of comparison) that the vegetation is exposed to the same PM2.5 concentrations. Thirty-one tree species (specific species are listed in the results) were tested for their capacity to accumulate PM2.5 on the leaf surface. Leaves of 15 species were collected in April 2015 as late spring samples, and the leaves of 16 additional species were collected during September 2015 as the summer-autumn samples. The following criteria applied to leaf collection days: sunny and wind speed less than 5 m s−1. Lower wind speeds ensured that the wind would not affect the particle deposition on the leaf 82. A portable meteorological station (NK4500, Kestrel Co., Philadelphia, PA, USA) was used to measure the sampling conditions in the middle of an open green space at a height of 10 m. All the branches were firmly held and cut carefully from a height of 1.5–2.5 m to avoid losing particulate matter from the leaves. Each species included three sampled trees, and eight small peripheral branches at four azimuth angles were cut from one sampled tree. This sample size provided a leaf area range of 300 to 500 cm2. During collection, samples were immediately closed and labeled in plastic bags to avoid contamination, and they were stored in the lab in a freezer (−18 °C).

PM2.5 can be trapped both on the leaf surface and in the leaf wax. However, only PM2.5 deposition on the leaf surface was assessed in this study because of the environmental concerns of using chloroform81 and the relatively low ratio of in-wax PM2.5 20. Once the samples were removed from the freezer, 10 g (fresh weight) of leaves were washed with distilled water and brushed carefully so that the PM2.5 was fully removed from the leaf surface. The solution was run through a metal sieve with a mesh diameter of 100 μm to obtain a suspension of liquid sample I. Ten percent of the liquid sample I was injected into pre-weighted PP plastic bag (W1) and dried. The dried bag was weighted again (W2), and the difference between W2 and W1 was the weight of 10% of the total suspended particulates (TSP) in the rinse water, which was translated to the TSP amount (WTSP) in the original liquid sample by dividing by 0.1. The remaining 90% of water sample I was pumped through filters (PTFE membrane, Whatman, UK) of 10 μm and then of 2.5 μm to intercept particles with a diameter of 10–100 μm and 2.5–10 μm, respectively81. The filters used for the analysis were first soaked in distilled water for 2 hours and then dried at 105 °C in a drying chamber for 3 hours to remove soluble impurities, and they were then placed in a balancing chamber for 48 hours to stabilize the humidity change. Filters were weighed before and after filtration (XS105DU balance, Mettler-Toledo International Inc., Switzerland). The resulting weight of the PM10-100 and PM2.5-10 only account for 90% of the original rinsing liquid and therefore should be divided by 0.9 to obtain the total PM10-100 ($${{\rm{W}}}_{{\text{PM}}_{10 \mbox{-} 100}}$$) and PM2.5-10 ($${{\rm{W}}}_{{\text{PM}}_{2.5 \mbox{-} 10}}$$). The PM2.5 mass was then calculated as the difference between the WTSP and the sum of $${{\rm{W}}}_{{\text{PM}}_{10 \mbox{-} 100}}$$ and $${{\rm{W}}}_{{\text{PM}}_{2.5 \mbox{-} 10}}$$.

To facilitate the species comparison, leaf area-normalized PM2.5 accumulation results (i.e. in the unit of μg cm−2) are required. Therefore, the leaves were scanned, and the surface areas were obtained from digital images processed with Photoshop (version: Photoshop CS5, Adobe Systems Incorporated, San Jose, CA, U.S.). Branches were excluded from the PM2.5 deposition quantification due to issues with accurately assessing branch area and the potentially low ratio in the total plant area index83. For needle leaves, we measured water displacement to determine leaf volume and converted the volume to the leaf area according to the following formula:

$${A}_{L}=2L(1+\frac{\pi }{n})\sqrt{\frac{nV}{\pi L}}$$
(1)

where A L is the leaf area, V is the water displacement volume as a the substitute of the needle-leaf-volume, n is the number of needle leaves in a single bundle, and L is the average length of the needle leaves84.

Microscopic observation of foliar morphology

Leaf samples were examined under an environmental scanning electron microscope (ESEM, Quanta 200 FEG, FEI, USA) operated in the low vacuum mode (15 kV, 80 Pa) to test for relationships between foliar micromorphological traits and PM2.5 accumulation. These analyses were conducted on the same day to prevent desiccation and subsequent alteration of leaf surface micromorphology3. Two pieces (1 × 1 cm2) were excised from the centre of the lamina of each leaf 22. Then, two adaxial specimens and two abaxial specimens23 were coated with a thin conductive film of platinum in order to increase electrical conductivity and improve optical transmission. The processed samples were mounted on the stubs for microscopic observations. Grooves, trichomes and stomata were included for further analysis after a preliminary visual screening of the scanning images to determine the effective micromorphological traits for PM2.5 retention. The roughness of the leaves on the abaxial or adaxial side was quantified in terms of the groove area ratio (%), which represents the ratio of groove area to total leaf area of the specimen;

$${Groove}\,{area}\,{ratio}=\frac{{A}_{G}}{{A}_{L}}\times 100 \%$$
(2)

where A G stands for groove area (μm2) and A L stands for total leaf area (μm2). Due to the overlapping of trichomes, this trait could not be quantified in a measurable unit. Instead, the pubescent area (defined as the surface bearing trichomes) as calculated as a measurement of the trichomes density. The stomata were quantified in terms of stomatal density (SD, mm−2) and stomatal size (evaluated in diameter, DS, μm).

Simulated rain wash experiment

A controlled rainfall wash experiment was conducted to evaluate the species differences in resisting rainfall removal of foliar PM2.5. Branches with leaves of different species were fixed in a container with a hole at the bottom for sampling water, and they were then placed underneath an artificial rainfall system. The system was installed at the ceiling of a room with a base area of 400 m2. Based on the statistical data provided by Haidian District Water Authority, Beijing, China (http://hdsw.bjhd.gov.cn/zxfw/bmcxfw/hdqyqcx/index_3.htm), the average daily rainfall during the sampling period was 8.4 mm, and individual rainfall event s varied between 2–10 mm most frequently in the region. Combined with the settings of the system, the samples were subjected to a simulated rain event of 7.5 mm that lasted for 15 minutes. The water containing the washed foliar PM2.5 was sampled every 3 minutes to examine the change in the amount of PM2.5 washed off the leaves. Each species had three repetitions. In addition, to exclude the influence of impurities from the water, a parallel experiment was conducted for the control group, and it included three containers with the same configurations as all of the others but with no branch sample. The final result of the washed-off PM2.5 was calculated as the difference between the water samples from planting containers and that from the control group.

Statistical analysis

Significant differences among species were examined via one-way ANOVA in SPSS 18.0 (SPSS Inc., Chicago, IL, USA). The Bonferroni correction method was applied for the comparison statement because of the unequal sample size among groups. Curve fitting and plotting were conducted using Sigmaplot software 12.5 (Systat Software, San Jose, CA, USA).

References

1. Gilmour, P. S. et al. Pulmonary and systemic effects of short-term inhalation exposure to ultrafine carbon black particles. Toxicol. Appl. Pharmacol. 195, 35–44 (2004).

2. Pope, C. A. III et al. Ambient particulate air pollution, heart rate variability, and blood markers of inflammation in a panel of elderly subjects. Environ. Health Persp. 112, 339 (2004).

3. Speak, A., Rothwell, J., Lindley, S. & Smith, C. Urban particulate pollution reduction by four species of green roof vegetation in a UK city. Atmos. Environ. 61, 283–293 (2012).

4. Wang, D. F. et al. Intense secondary aerosol formation due to strong atmospheric photochemical reactions in summer: observations at a rural site in eastern Yangtze River Delta of China. Sci. Total Environ. 571, 1454–1466 (2016).

5. Liu, Q. et al. Vertical distribution of ambient aerosol extinctive properties during haze and haze-free periods based on the Micro-Pulse Lidar observation in Shanghai. The Science of the total environment 574, 1502–1511 (2017).

6. Lindwall, F. et al. Fourfold higher tundra volatile emissions due to arctic summer warming. J. Geophys. Res.-Biogeosci. 121, 895–902 (2016).

7. Zielinski, T. et al. Impact of wild forest fires in Eastern Europe on aerosol composition and particle optical properties. Oceanologia 58, 13–24, doi:10.1016/j.oceano.2015.07.005 (2016).

8. Gaston, C. J. et al. Online molecular characterization of fine particulate matter in Port Angeles, WA: Evidence for a major impact from residential wood smoke. Atmos. Environ. 138, 99–107 (2016).

9. Rea, G. et al. Impact of the New South Wales fires during October 2013 on regional air quality in eastern Australia. Atmos. Environ. 131, 150–163, doi:10.1016/j.atmosenv.2016.01.034 (2016).

10. Escobedo, F. J. & Nowak, D. J. Spatial heterogeneity and air pollution removal by an urban forest. Landsc. Urban Plan. 90, 102–110 (2009).

11. Meusel, I., Neinhuis, C., Markstädter, C. & Barthlott, W. Ultrastructure, chemical composition, and recrystallization of epicuticular waxes: transversely ridged rodlets. Can. J. Bot. 77, 706–720 (1999).

12. Freer-Smith, P., Holloway, S. & Goodman, A. The uptake of particulates by an urban woodland: site description and particulate composition. Environ. Pollut. 95, 27–35 (1997).

13. Wang, Y. C. Carbon sequestration and foliar dust retention by woody plants in the greenbelts along two major Taiwan highways. Ann. Appl. Biol. 159, 244–251 (2011).

14. Yin, S. et al. Quantifying air pollution attenuation within urban parks: An experimental approach in Shanghai, China. Environ. Pollut. 159, 2155–2163 (2011).

15. Cavanagh, J. Influence of urban trees on air quality in Christchurch; preliminary estimates LC0708/097. Landcare Research, Lincoln, NZ (2008).

16. Yang, J., McBride, J., Zhou, J. & Sun, Z. The urban forest in Beijing and its role in air pollution reduction. Urban For. Urban Gree. 3, 65–78 (2005).

17. McDonald, A. et al. Quantifying the effect of urban tree planting on concentrations and depositions of PM10 in two UK conurbations. Atmos. Environ. 41, 8455–8467 (2007).

18. Freer-Smith, P., Beckett, K. & Taylor, G. Deposition velocities to Sorbus aria, Acer campestre, Populus deltoides× trichocarpa ‘Beaupré’, Pinus nigra and× Cupressocyparis leylandii for coarse, fine and ultra-fine particles in the urban environment. Environ. Pollut. 133, 157–167 (2005).

19. Sgrigna, G. et al. Particulate Matter deposition on Quercus ilex leaves in an industrial city of central Italy. Environ. Pollut. 197, 187–194 (2015).

20. Mo, L. et al. Assessing the Capacity of Plant Species to Accumulate Particulate Matter in Beijing, China. PloS one 10, e0140664 (2015).

21. Mitchell, R., Maher, B. & Kinnersley, R. Rates of particulate pollution deposition onto leaf surfaces: temporal and inter-species magnetic analyses. Environ. Pollut. 158, 1472–1478 (2010).

22. Neinhuis, C. & Barthlott, W. Seasonal changes of leaf surface contamination in beech, oak, and ginkgo in relation to leaf micromorphology and wettability. New Phytol. 138, 91–98 (1998).

23. Wang, L., Gong, H. L., Liao, W. B. & Wang, Z. Accumulation of particles on the surface of leaves during leaf expansion. Sci. Total Environ. 532, 420–434 (2015).

24. Litschke, T. & Kuttler, W. On the reduction of urban particle concentration by vegetation–a review. Meteorol. Z. 17, 229–240 (2008).

25. Peters, K. & Eiden, R. Modelling the dry deposition velocity of aerosol particles to a spruce forest. Atmos. Environ. Part A 26, 2555–2564 (1992).

26. Bunzl, K., Schimmack, W., Kreutzer, K. & Schierl, R. Interception and retention of Chernobyl-derived 134 Cs, 137 Cs and 106 Ru in a spruce stand. Sci. Total Environ. 78, 77–87 (1989).

27. Selmi, W. et al. Air pollution removal by trees in public green spaces in Strasbourg city, France. Urban For. Urban Gree. 17, 192–201 (2016).

28. Gallagher, M. et al. Measurements of aerosol fluxes to Speulder forest using a micrometeorological technique. Atmos. Environ. 31, 359–373 (1997).

29. Beckett, K. P., Freer Smith, P. & Taylor, G. Effective tree species for local air quality management. J. Arboric. 26, 12–19 (2000).

30. Nowak, D. J., Hirabayashi, S., Bodine, A. & Hoehn, R. Modeled PM2.5 removal by trees in ten US cities and associated health effects. Environ. Pollut. 178, 395–402 (2013).

31. Beckett, K. P., Freer-Smith, P. & Taylor, G. Particulate pollution capture by urban trees: effect of species and windspeed. Glob. Change Biol. 6, 995–1003 (2000).

32. Zhang, L., Gong, S., Padro, J. & Barrie, L. A size-segregated particle dry deposition scheme for an atmospheric aerosol module. Atmos. Environ. 35, 549–560 (2001).

33. Sæbø, A. et al. Plant species differences in particulate matter accumulation on leaf surfaces. Sci. Total Environ. 427, 347–354 (2012).

34. Beckett, K. P., Freer-Smith, P. & Taylor, G. Urban woodlands: their role in reducing the effects of particulate pollution. Environ. Pollut. 99, 347–360 (1998).

35. Rai, A., Kulshreshtha, K., Srivastava, P. & Mohanty, C. Leaf surface structure alterations due to particulate pollution in some common plants. Environmentalist 30, 18–23 (2010).

36. Prusty, B., Mishra, P. & Azeez, P. Dust accumulation and leaf pigment content in vegetation near the national highway at Sambalpur, Orissa, India. Ecotoxicol. Environ. Saf. 60, 228–235 (2005).

37. Kardel, F. et al. Leaf saturation isothermal remanent magnetization (SIRM) as a proxy for particulate matter monitoring: inter-species differences and in-season variation. Atmos. Environ. 45, 5164–5171 (2011).

38. Burkhardt, J. Hygroscopic particles on leaves: nutrients or desiccants? Ecol. Monogr. 80, 369–399 (2010).

39. Räsänen, J. V. et al. Effects of species-specific leaf characteristics and reduced water availability on fine particle capture efficiency of trees. Environ. Pollut. 183, 64–70 (2013).

40. Hwang, H. J., Yook, S. J. & Ahn, K. H. Experimental investigation of submicron and ultrafine soot particle removal by tree leaves. Atmos. Environ. 45, 6987–6994 (2011).

41. Freer-Smith, P., El-Khatib, A. & Taylor, G. Capture of particulate pollution by trees: a comparison of species typical of semi-arid areas (Ficus nitida and Eucalyptus globulus) with European and North American species. Water Air Soil Poll. 155, 173–187 (2004).

42. Hofman, J. et al. On the relation between tree crown morphology and particulate matter deposition on urban tree leaves: A ground-based LiDAR approach. Atmos. Environ. 99, 130–139 (2014).

43. Weber, F., Kowarik, I. & Säumel, I. Herbaceous plants as filters: Immobilization of particulates along urban street corridors. Environ. Pollut. 186, 234–240 (2014).

44. Chen, L. et al. Experimental examination of effectiveness of vegetation as bio-filter of particulate matters in the urban environment. Environ. Pollut. 208, 198–208 (2016).

45. Seinfeld, J. H. & Pandis, S. N. Atmospheric Chemistry And Physics: From Air Pollution To Climate Change. 1203 (Wiley & Sons, 2006).

46. Tiwary, A. et al. An integrated tool to assess the role of new planting in PM10 capture and the human health benefits: a case study in London. Environ. Pollut. 157, 2645–2653 (2009).

47. Tallis, M., Taylor, G., Sinnett, D. & Freer-Smith, P. Estimating the removal of atmospheric particulate pollution by the urban tree canopy of London, under current and future environments. Landsc. Urban Plan. 103, 129–138 (2011).

48. Chamberlain, A. In Vegetation and the Atmosphere Vol. 1 (ed J. L. Monteith) 155–203 (Academic Press, 1975).

49. Ackerly, D. et al. Leaf size, specific leaf area and microhabitat distribution of chaparral woody plants: contrasting patterns in species level and community level analyses. Oecologia 130, 449–457 (2002).

50. Barthlott, W. & Neinhuis, C. Purity of the sacred lotus, or escape from contamination in biological surfaces. Planta 202, 1–8 (1997).

51. Neinhuis, C. & Barthlott, W. Characterization and distribution of water-repellent, self-cleaning plant surfaces. Ann. Bot. 79, 667–677 (1997).

52. Feng, Z. et al. Evidence of widespread ozone-induced visible injury on plants in Beijing, China. Environ. Pollut. 193, 296–301, doi:10.1016/j.envpol.2014.06.004 (2014).

53. Shaw, P. J. A., Holland, M. R., Darrall, N. M. & McLeod, A. R. The occurrence of SO2-related foliar symptoms on Scots pine (Pinus sylvestris L.) in an open-air forest fumigation experiment. New Phytol. 123, 143–152, doi:10.1111/j.1469-8137.1993.tb04540.x (1993).

54. Janhunen, S., Palomäki, V. & Holopainen, T. Aluminium causes nutrient imbalance and structural changes in the needles of Scots pine without inducing clear root injuries. Trees 9, 134, doi:10.1007/bf02418202 (1995).

55. Ottelé, M., van Bohemen, H. D. & Fraaij, A. L. Quantifying the deposition of particulate matter on climber vegetation on living walls. Ecol. Eng. 36, 154–162 (2010).

56. Liu, X., Yu, X. & Zhang, Z. PM2.5 concentration differences between various forest types and its correlation with forest structure. Atmosphere 6, 1801–1815 (2015).

57. Younis, U. et al. Variations in leaf dust accumulation, foliage and pigment attributes in fruiting plant species exposed to particulate pollution from Multan. Int. J. Agric. Sci. Res. 3, 1–12 (2013).

58. Song, Y. et al. Particulate matter deposited on leaf of five evergreen species in Beijing, China: Source identification and size distribution. Atmos. Environ. 105, 53–60 (2015).

59. Jamil, S. et al. Fly ash trapping and metal accumulating capacity of plants: Implication for green belt around thermal power plants. Landsc. Urban Plan. 92, 136–147 (2009).

60. Blanusa, T., Fantozzi, F., Monaci, F. & Bargagli, R. Leaf trapping and retention of particles by holm oak and other common tree species in Mediterranean urban environments. Urban For. Urban Gree. 14, 1095–1101 (2015).

61. Wang, L. et al. Physicochemical characteristics of ambient particles settling upon leaf surfaces of urban plants in Beijing. J. Environ. Sci. 18, 921–926 (2006).

62. Abbruzzese, G. et al. Leaf morphological plasticity and stomatal conductance in three Populus alba L. genotypes subjected to salt stress. Environ. Exp. Bot. 66, 381–388, doi:10.1016/j.envexpbot.2009.04.008 (2009).

63. Yang, J. et al. Accumulation of particulate matter on leaves of nine urban greening plant species with different micromorphological structures in Beijing. Reserch of Environmental Sciences 28, 384–392 (2015).

64. Simon, E. et al. Elemental concentrations in deposited dust on leaves along an urbanization gradient. Sci. Total Environ. 490, 514–520, doi:10.1016/j.scitotenv.2014.05.028 (2014).

65. Liang, D. et al. Quantifying PM2.5 capture capability of greening trees based on leaf factors analyzing. Environmental Science and Pollution Research 23, 21176–21186, doi:10.1007/s11356-016-7687-9 (2016).

66. Mohan, S. M. An overview of particulate dry deposition: measuring methods, deposition velocity and controlling factors. International Journal of Environmental Science and Technology 13, 387–402, doi:10.1007/s13762-015-0898-7 (2016).

67. Farmer, A. M. The effects of dust on vegetation-a review. Environ. Pollut. 79, 63–75, doi:10.1016/0269-7491(93)90179-r (1993).

68. Rai, A., Kulshreshtha, K., Srivastava, P. K. & Mohanty, C. S. Leaf surface structure alterations due to particulate pollution in some common plants. Environmentalist 30, 18–23, doi:10.1007/s10669-009-9238-0 (2010).

69. Liu, L., Guan, D. & Chen, Y. Morphological structure of leaves and dust-retaining capability of common street trees in Guangzhou Municipality. Acta Eco. Sin. 33, 2604–2614 (2013).

70. Juri Ayub, J. et al. Assessment of 7Be content in precipitation in a South American semi-arid environment. Sci. Total Environ. 441, 111–116 (2012).

71. Shi, H., Wang, H. & Li, Y. Wettability on plant leaf surfaces and its ecological significance. Acta Eco. Sin. 31, 4287–4298 (2011).

72. Bussonniere, A. et al. Universal wetting transition of an evaporating water droplet on hydrophobic micro- and nano-structures. Soft matter 13, 978–984, doi:10.1039/c6sm02287a (2017).

73. Zheng, Q. S., Yu, Y. & Zhao, Z. H. Effects of hydraulic pressure on the stability and transition of wetting modes of superhydrophobic surfaces. Langmuir 21, 12207–12212, doi:10.1021/la052054y (2005).

74. Owen, S. et al. Biogenic volatile organic compound (VOC) emission estimates from an urban tree canopy. Ecol. Appl. 13, 927–938 (2003).

75. Tiwary, A. & Kumar, P. Impact evaluation of green–grey infrastructure interaction on built-space integrity: an emerging perspective to urban ecosystem service. Sci. Total Environ. 487, 350–360 (2014).

76. Benjamin, M. T. & Winer, A. M. Estimating the ozone-forming potential of urban trees and shrubs. Atmos. Environ. 32, 53–68 (1998).

77. Simpson, J. & McPherson, E. The tree BVOC index. Environ. Pollut. 159, 2088–2093 (2011).

78. Calfapietra, C. et al. Role of Biogenic Volatile Organic Compounds (BVOC) emitted by urban trees on ozone concentration in cities: A review. Environ. Pollut. 183, 71–80 (2013).

79. Kesselmeier, J. & Staudt, M. Biogenic volatile organic compounds (VOC): an overview on emission, physiology and ecology. J. Atmos. Chem. 33, 23–88 (1999).

80. Wania, A., Bruse, M., Blond, N. & Weber, C. Analysing the influence of different street vegetation on traffic-induced particle dispersion using microscale simulations. J. Environ. Manag. 94, 91–101 (2012).

81. Dzierżanowski, K. et al. Deposition of particulate matter of different size fractions on leaf surfaces and in waxes of urban forest species. Int. J. Phytoremediat. 13, 1037–1046 (2011).

82. Ould-Dada, Z. & Baghini, N. M. Resuspension of small particles from tree surfaces. Atmos. Environ. 35, 3799–3809 (2001).

83. Van der Zande, D. et al. 3D upscaling of transpiration from leaf to tree using ground-based LiDAR: Application on a Mediterranean Holm oak (Quercus ilex L.) tree. Agric. For. Meteorol. 149, 1573–1583 (2009).

84. Li, J., Zhou, P. & Zhao, L. Influence of drought stress on transpiring water-consumption of seedlings. Acta Eco. Sin. 22, 1380–1386 (2001).

Download references

Acknowledgements

The authors gratefully thank Ge Sun and Steven McNulty from USDA Forest Service for their dedication in editing the manuscript. And we acknowledge Forestry Public Welfare Project of China (Project No. 20130430103), National Natural Science Foundation of China (Project No. 31400615 and 41401013), the Fundamental Research Funds for the Central Universities (No. 2015ZCQ-SB-03) and the open project of Beijing engineering technology and research center of rural landscape planning and design (No. bjxcjg201601) for funding the research.

Author information

Authors

Contributions

L.X.C. contributed to the literature search, study design, data analysis and interpretation, and manuscript writing and revision. L.Z., C.M.L. and R.Z. contributed to study design, experiment performance and data processing. Z.Q.Z. led the study design and field experiments, and revised the draft manuscript.

Corresponding author

Correspondence to Zhiqiang Zhang.

Ethics declarations

Competing Interests

The authors declare that they have no competing interests.

Additional information

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

About this article

Cite this article

Chen, L., Liu, C., Zhang, L. et al. Variation in Tree Species Ability to Capture and Retain Airborne Fine Particulate Matter (PM2.5). Sci Rep 7, 3206 (2017). https://doi.org/10.1038/s41598-017-03360-1

Download citation

• Received:

• Accepted:

• Published:

• DOI: https://doi.org/10.1038/s41598-017-03360-1

Further reading

• Influence of urban air pollution on the population in the Klang Valley, Malaysia: a spatial approach

• Siti Haslina Mohd Shafie
• Mastura Mahmud
• Ahmad Fariz Mohamed

Ecological Processes (2022)

• Combined effects of different leaf traits on foliage dust-retention capacity and stability

• Lishuai Xu
• Qian Yan
• XueXiong Chen

Air Quality, Atmosphere & Health (2022)

• Urban greenery for air pollution control: a meta-analysis of current practice, progress, and challenges

• Sriroop Chaudhuri
• Arvaan Kumar

Environmental Monitoring and Assessment (2022)

• Variations of particulate matter retention by foliage after wind and rain disturbance

• Lishuai Xu
• Qian Yan
• Yaodong Jing

Air Quality, Atmosphere & Health (2022)

• The effectiveness of urban trees in reducing airborne particulate matter by dry deposition in Tehran, Iran

• Seyed Mahdi Heshmatol Vaezin
• Mohammad Moftakhar Juybari
• Thomas Grant Pypker

Environmental Monitoring and Assessment (2021)

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Search

Quick links

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing