Understanding occupants’ behaviour, engagement, emotion, and comfort indoors with heterogeneous sensors and wearables

We conducted a field study at a K-12 private school in the suburbs of Melbourne, Australia. The data capture contained two elements: First, a 5-month longitudinal field study In-Gauge using two outdoor weather stations, as well as indoor weather stations in 17 classrooms and temperature sensors on the vents of occupant-controlled room air-conditioners; these were collated into individual datasets for each classroom at a 5-minute logging frequency, including additional data on occupant presence. The dataset was used to derive predictive models of how occupants operate room air-conditioning units. Second, we tracked 23 students and 6 teachers in a 4-week cross-sectional study En-Gage, using wearable sensors to log physiological data, as well as daily surveys to query the occupants’ thermal comfort, learning engagement, emotions and seating behaviours. Overall, the combined dataset could be used to analyse the relationships between indoor/outdoor climates and students’ behaviours/mental states on campus, which provide opportunities for the future design of intelligent feedback systems to benefit both students and staff. Measurement(s) humidity • temperature • noise level • carbon dioxide • barometric pressure • wind speed • wind direction • solar radiation • UV, rainfall • 3-axis acceleration • skin temperature • electrodermal activity • blood volume pulse • thermal sensation • thermal preference • clothing level • seating position • three-dimensional (behavioural/emotional/cognitive) engagement • emotion (arousal/valence) • the confidence level of responses Technology Type(s) weather station • Empatica E4 wristband • self-report survey Sample Characteristic - Organism Homo sapiens Sample Characteristic - Environment a k-12 private school Sample Characteristic - Location Melbourne Measurement(s) humidity • temperature • noise level • carbon dioxide • barometric pressure • wind speed • wind direction • solar radiation • UV, rainfall • 3-axis acceleration • skin temperature • electrodermal activity • blood volume pulse • thermal sensation • thermal preference • clothing level • seating position • three-dimensional (behavioural/emotional/cognitive) engagement • emotion (arousal/valence) • the confidence level of responses Technology Type(s) weather station • Empatica E4 wristband • self-report survey Sample Characteristic - Organism Homo sapiens Sample Characteristic - Environment a k-12 private school Sample Characteristic - Location Melbourne


Background & Summary
How can indoor spaces be designed in ways that increase occupant well-being while decreasing energy consumption? Answering this question requires a holistic understanding of indoor climates, occupant comfort and behaviour, as well as the dynamic relationships between these different aspects. The present study sits within a context of research that aims to gain insights by examining these themes using mixed methods of data capture within operational buildings. More specifically, the study contains two separate assays, each relating to a distinct body of existing research.
The first assay is a 5-month longitudinal field study using outdoor and indoor weather stations as well as sensors to determine the use of occupant-controlled room air-conditioners. This assay was undertaken to contribute knowledge to the research field of occupant behaviour modelling in building performance simulation. During the design of buildings, engineers often use simulations to predict the indoor environmental quality and energy consumption of design options in order to inform decision-making. There are often large discrepancies between simulated and actual building performance 1 . One of the main factors driving this so-called 'performance gap' is the current misrepresentation of occupant behaviour in the simulations 2 . The software is accurate at modelling deterministic systems like automated air-conditioning units that are governed by set point temperatures, but incapable of accurately modelling the probabilistic nature of human behaviour, for example, the manual operation of air-conditioners. Occupant behaviour tends to be modelled on simplistic, rule-of-thumb assumptions that are not backed by data 3 , usually by using the same set point approaches that are applied to comfort but also their emotions, engagement and productivity while at school. Especially, it's unusual to combine individual sensor data with building environmental data together, to study how indoor and outdoor environments influence the complex occupant behaviours and physiological responses. The combination of two datasets will benefit building scientists, behaviour psychologists and affective computing researchers in future research.

Methods ethics approval. The data collection was approved by the Science, Engineering and Health College Human
Ethics Advisory Network (SEH CHEAN) of RMIT University. SEH CHEAN also reviewed and approved the consent forms for participants and guardians of minors, which included information on the purpose of and procedures for the research, the types of data to be collected, the compensation for the involvement and the protocols for privacy protection and data storage. The project was also approved by the principal of the school in which the study was conducted.
participants and recruitment. For the cross-sectional study, we recruited participants from a K-12 private school in the suburbs of Melbourne (pop. 700). The recruitment occurred in August and September 2019, and calls for participation were disseminated through information leaflets, recruitment letters and a presentation in the school hall, with the assistance of the director teacher of the Year 10 students (Year 10 is the eleventh year of compulsory education in Australia). The admission was restricted to Year 10 students and their teachers whose native language was English or who were bilingual. A total of 23 (15-17 years old, 13 female and 10 male) out of 75 Year 10 students and six (33-62 years old, four female and two male) out of 12 teachers met the inclusion criteria, volunteered for the study and signed the consent forms. Since all the student participants were underage, their guardians also provided signed consent forms. Raw data for n = 23 student participants were properly recorded and nearly complete (but with different wristband wearing days), constituting the majority of the En-Gage dataset. The volunteers were then asked to complete an online background survey, which was accessible through a web page link that was shared with them. In the survey, we collected information on the participants' age, gender, general thermal comfort and classes. The Year 10 students at the school were taught in separate class groups. They were separated into three Form groups for English, Science, Global Politics, Physical Education and Health/Sport courses, three Maths groups and four Language groups (see Table 2). Asking for each student's class group in the background survey allowed us to determine which classroom they were in at any given time. Among the participating teachers, there were three math teachers, one English teacher, one Japanese teacher, and one science teacher.
As a token of appreciation for their participation, we awarded each participating student with a certificate of participation and four movie vouchers -one for each week of successful participation. Participation in this research project was voluntary, and we communicated to participants that they were free to withdraw from the project at any stage. experiment setup. We conducted our study at a mixed-gender K-12 private school.The longitudinal study was conducted for a 5.5-month period from 7 October 2019 to 23 March 2020, using the indoor and outdoor weather stations as well as temperature sensors attached to air-conditioning outlets. The cross-sectional study included four weeks of data capture: the first two weeks of data collection started from 2 September 2019, and the second two weeks of data collection started from 28 October 2019, using the wearable sensors as well as the same weather stations in the first longitudinal study. The two studies are located on the same campus, and the timelines of the two studies were partly overlapped. As a result, the collected data (i.e., weather information and occupant behaviours) in the longitudinal study can benefit the cross-sectional study or vice versa. For instance, the outdoor temperature and humidity can help researchers understand student clothing insulation and thermal comfort on campus. Additionally, the physiological signals can be combined with the environmental signals to accurately predict the heating/cooling behaviours of occupants in buildings.
In the study, we tracked participants using Empatica E4 wristbands (see Fig. 1(a)) to measure physiological data, as well as daily surveys to query their thermal comfort, learning engagement and emotions while at school. Overall, we have collected 488 survey responses and 1415.56 hours of wearable data from all participants. During the data collection, one representative student was selected in each of the three Form classes. Their job

Group
Room Participant   Form   R1  P13, P14, P15, P16, P17, P18, P19, P20, P21, P22   R2  P8, P9, P10, P11, P12, P23   R3  P1, P2, P3, P4, P5, P6, P7   Maths   R1  P2, P4, P5, P10, P11, P14, P18   R2  P3, P6, P7, P8, P9, P15,   www.nature.com/scientificdata www.nature.com/scientificdata/ was to distribute wristband sensors each morning, collect them after school and remind participants to complete the online surveys at the appropriate times. We anonymised the student's data by assigning each student an identity number (ID). Occupancy schedules were obtained from the individual classroom schedules provided by the school. These schedules can be used to represent the actual occupancy patterns of the building, although slight deviations from the planned schedule are to be expected in a school setting due to sickness and other circumstances. The following is a description of the research instruments used in the study (see Table 3).
Daily surveys. On each school day, student participants were asked to complete online surveys (either through tablets placed in each classroom or using their own digital devices) at 11:00, 13:25 and 15:35 (directly after the second, fourth and fifth class). The length of the second and fourth class was either 40 min or 80 min, depending on the day of the week, and the fifth class always lasted 80 min. The curriculum in this school had a bi-weekly rhythm, i.e., the first and second weeks had different class schedules, but the first and third weeks were identical, as were the second and fourth weeks. The representative student was tasked with reminding the student participants to complete the online surveys on time, as described in Table 4. The online questionnaire included 11 items related to the students' psychological states and behaviours (e.g., thermal comfort, student engagement and emotions). All the items (except the seating location and confidence level) were used directly or slightly adapted from the validated questionnaires widely used by researchers in this area. The screenshot of the question for seating location can be seen from Fig. 2(a). Figure 2(b) illustrates the implemented PAM 13 asking the user to choose one picture from a grid of 16 pictures in a library of 32 photos. Figure 3 displays the distribution of responses to the thermal sensation (from −3 to 3), thermal preference and clothing level. The distribution of multidimensional (behavioural, emotional and cognitive) engagement can be found in Fig. 4(a), and the overall engagement across participants is reflected in Fig. 4(b). Figure 3(c) depicts the distribution of emotions in the valence and arousal dimensions. The numbers indicate the percentage frequencies, and the darker the colour, the higher the frequency of the specific emotion (e.g., arousal = 1 and valence = 2). Figure 5 shows the distribution of seating locations across different participants. Figure 6(a) shows the distribution of survey responses throughout the day. As students were requested to submit their self-reports directly after the second, fourth, and fifth classes (i.e., 11:00, 13:25 and 15:35, respectively), most responses were submitted at 11:00-12:00, 13:00-14:00 and 15:00-16:00. The survey responses that were recorded before the start of the targeted class or after the start of the next class should be removed if we aim to explore student engagement in the targeted class. However, if we wish to study thermal comfort, clothing insulation, emotion or confidence level, all the survey responses can be kept. Next, we explored the distribution of the survey responses through the week (see Fig. 6(b)). We found that most students submitted their responses on Monday or Thursday. The number of students who submitted self-reported data on Wednesday was the lowest. The potential reason for this may be that students forgot to submit their responses, as they took breadth studies on Wednesday (normal studies on the other weekdays).   www.nature.com/scientificdata www.nature.com/scientificdata/ Empatica E4 wristband. These wristband sensors (see Fig. 1(a)) were first proposed for use in studies by Garbarino et al. 14 . These watch-like devices have multiple sensors: an EDA sensor, a photoplethysmography (PPG) sensor, a three-axis accelerometer (ACC) and an optical thermometer. EDA refers to constantly fluctuating changes in the electrical properties of the skin at 4 Hz; when the level of sweat increases, the conductivity of the skin increases. PPG sensors measure the blood volume pulse (BVP) at 64 Hz, from which the interbeat interval (IBI) and heart rate variability (HRV) can be derived. The ACC records in the range of [−2 g, 2 g] at 32 Hz and captures motion-based activity, which has been widely used in smartphones, wearables and other IoT devices 15 . The optical thermometer reads peripheral skin temperature (ST) at 4 Hz. In recording mode, E4 wristbands can store 60 hours of data in memory, with a battery life of over 32 hours. They are lightweight, comfortable and waterproof, and were thus especially suitable for the continuous and unobtrusive monitoring of the participants in our study. Before the data collection, all wristbands were synchronised with the E4 Manager App, using a single laptop to ensure that the internal clocks were accurate. Each student was assigned a wristband sensor marked with their unique study ID. The students were asked to wear the wristband on their non-dominant hand, and to avoid pressing the button or performing any unnecessary movements during class. The teacher participants were only required to wear the wristbands while teaching the year 10 classes. Figure 7 displays the  Table 4. Collected annotations from the questionnaires. DigiTech XC0422. We set up two outdoor weather stations on-site: one in the prevailing NNW windward direction located at some distance from the buildings, and one on the SSE leeward side. These logged the data types shown in Table 5 at 5-minute intervals via the school's guest WiFi to WUnderground.com where it can be   www.nature.com/scientificdata www.nature.com/scientificdata/ accessed remotely. Note that these weather stations log solar irradiance values in W/m2 but only have a luminosity sensor. The method of conversion from lux to W/m2 is unclear from the product's datasheet, but we assumed that it was in line with a commonly used, simplified conversion rate (e.g. Michael, 2019) 16 .
Netatmo healthy home coach. We collected indoor environmental data using Netatmo Healthy Home Coaches installed in 17 classrooms as shown in Fig. 1(b,c). The logging specifications of these devices are shown in Table 6. These devices measure indoor temperature, relative humidity, CO 2 levels and noise levels at a five-minute logging frequency. The data was uploaded in real-time via the school's guest WiFi to the Netatmo cloud platform from which we accessed the data remotely through our Netatmo account login. The analysed classrooms differed from one another in several aspects including the room geometry and orientation, as well as the number and location of windows. The placement of environmental sensor devices was therefore determined on a case-by-case basis, with the goal of finding an optimal trade-off between several, partly conflicting considerations, most of which were suggested by Wagner et al. 17 . For example, we tried placing the sensors close to the occupants but at the same time avoiding the sensors from being obstructed, biased or obtrusive due to their proximity to the occupants, furniture, heating elements, vents or appliances. The ASHRAE Standard 55 recommends temperature sensor heights of 0.1, 0.6 and 1.1 m for ankles, waists and heads of seated occupants, respectively. Given these guidelines, since only one device was installed per room in this study and the head height of children is lower than that of adults, we attempted to place the sensors at approximately 0.9 m. Three of the classrooms with a Netatmo station were rooms frequented by Year 10 students, therefore this data could be used in combination with the data captured by the E4 wristband sensors in the cross-sectional study. It should be noted that we started using these three devices and the outdoor weather stations before beginning the full longitudinal field study in all classrooms.
Philio temperature/humidity sensor. The classrooms had split-system remote-controlled air-conditioning units for heating and cooling. We inferred their usage by measuring temperature fluctuations with Philio Temperature/Humidity Sensors placed at the outlets of the vents of the remote-controlled room air conditioning units. The sensors logged data via Z-Wave to Vera Edge hubs, several of which were placed throughout the school due to their limited range. Data was logged at 5-minute intervals using custom LUA scripts via the VeraAlerts app within the Vera SmartHome app, which enabled sending the data to the Pushbullet online platform from where they could be accessed remotely.
Data post-processing. For the longitudinal study, we extracted the environmental data from their respective online platforms and rounded each data point's timestamp to the nearest 5-minute step to enable the aggregation of data from different sources, and interpolated over missing data points. The data from the two weather stations were averaged for each time step. In cases where one of the stations had missing data, we used the other weather station's data point. The outdoor wind direction was originally given in a 16-step scale of cardinal directions which we converted to numerical angle values in degrees.
Within the context of this field study, there was no way to directly monitor when the air conditioning units were in use. Instead, we measured their use indirectly with the Philio temperature sensors mounted to the air conditioning outlets. Creating an algorithm that reliably distinguishes all four event types (cooling switched on, cooling switched off, heating switched on and heating switched off) is a task that would have exceeded the scope of our research. Instead, we used threshold values of the temperature slope to predict events. If the current state was off, then a sudden rise would be classified as switching on the heating; if the current state was cooling, the same rise in temperature would be classified as switching off the cooling. We found that classifying a temperature difference of 0.5 degrees from one 5-minute time step to the next to be useful in auto-detecting the majority of switching events. However, this crude method was limited in its predictive capability, not least because in an 'on' state, an air-conditioner will automatically keep switching itself off and on in order to remain within a certain temperature band around the selected set point; an example of this can be seen in the last air-conditioning period shown in Fig. 8. Therefore, we relied on a visual assessment of the data and manually overwrote time frames with states that appeared to have been incorrectly categorised by the algorithm, based on the curves of the indoor temperature and AC temperature graphs. This is a potential source of error, but we assumed that the www.nature.com/scientificdata www.nature.com/scientificdata/ assessment was sufficiently accurate for this study -an assumption that proved correct when testing it on site. We aggregated all the data into spreadsheets for each classroom individually, and added several data, including columns that identified holiday periods, occupancy and time frames of insufficient data coverage.
In the cross-sectional study, for the wearable data, we converted the timestamps of the wristband sensor readings from raw time intervals and Unix time to the local date-time format. Then we categorized the wearable data based on a different date. The wearable data were extracted according to the scheduled length for the second, fourth and fifth class which ends at 11:00, 13:25, 15:35. For the online survey, we received a total of 488 valid online surveys from students with a response rate of 35.3%. We also received 22 online surveys from teachers. Then, we aligned the survey data to one of the three classes. We set the survey responses before 11:25 pm to belong to the second class, between 12:15 pm-14:15 pm to belong to the fourth class, after 14:15 pm to belong to the fifth class.     18 . It includes two elements: In-Gauge dataset for the longitudinal study and En-Gage dataset for the cross-sectional study. For the En-Gage dataset, we have provided two versions: the original raw data by date and organised data based on the different class groups of the participants.
The In-Gauge dataset consists of comma-separated variable (CSV) files -one for each classroom. Each classroom's spreadsheet contains time-related information and outdoor weather conditions (these are obviously identical for all classrooms). Furthermore, each classroom has information on its own indoor climate, whether or not it is occupied according to the class schedule, and information on whether its room air-conditioner is in heating or cooling mode. The En-Gage dataset includes physiological signals measured with the wristband sensors as well as self-reported engagement, thermal comfort, seating locations, and emotion data from the student and teacher participants.
contents. In the following, we describe the directories and files in our datasets.
Longitudinal. This folder contains all data pertaining to the longitudinal field study. It consists of a TXT file describing the dataset and 16 CSV files (one for each classroom). The CSV file names correspond to the classroom names. Each CSV file has a single header line and each of the following rows contains the following timestamped data at a resolution of 5 minutes per row: • UvLevel: An integer between 0 and 11 representing the current outdoor Global Solar UV Index.
• SolarRadiation: An integer representing the current outdoor solar radiation intensity in W/m 2 .
• CoolingState: '0' means that the room air-conditioner was currently not cooling the room; '1' means it was. • HeatingState: '0' means that the room air-conditioner was currently not heating the room; '1' means it was.
• UsabilityMask: For timeframes where too much data was missing, we set this UsabilityMask field to "False" for the entire day. During holidays, the UsabilityMask also reads "False". www.nature.com/scientificdata www.nature.com/scientificdata/ Participant_class_info. This folder contains demographic information on the background questionnaires participants, and the class schedule. Note that for several survey questions, we adopted the 5-point Likert scale: −2 = 'strongly disagree' , −1 = 'somewhat disagree' , 0 = 'neither agree nor disagree' , 1 = 'somewhat agree' and 2 = 'strongly agree' . The Participant_class_info folder contains the following files: 1. Student.csv. Each row in this file contains a participant ID (Column A), gender (Column B), age in years (Column C), form room, math room and language room (Columns D-F), and three background questions (Columns G-K) related to their general thermal comfort and engagement in class. Specifically, Columns G to I represent, respectively, the questions 'What is your general feeling in the classroom?' [−3 = cold, −2 = cool, −1 = slightly cool, 0 = neutral, 1 = slightly warm, 2 = warm, 3 = hot], 'When I am engaged in class, I usually don't feel too hot or too cold' and 'When I am engaged in class, I could get distracted when the room is too hot or too cold' . For the latter 2 questions, we adopted the 5-point Likert scale. Teacher_survey.csv contains the 22 survey responses by the teachers. The file includes 11 columns where Column A is the recorded time, Column B is the wristband ID, Columns C-E are the thermal comfort-related information, Columns F-G are the engagement related information, and Column K is the confidence level of the survey. For the wristband ID in Column B, A/B/C/D represent the classrooms R1/R2/R3/R4. The specific columns relate to the following questions: www.nature.com/scientificdata www.nature.com/scientificdata/ • Column K: Confidence_level: "Please rate your confidence level for your answers in this survey (optional)" [5-point Likert scales where 1 = Not confident, 3 = Somewhat confident, 5 = Very confident].
Raw_wearable_data. This folder includes 20 sub-folders named with the date of data collection (e.g., '20191122'), containing the raw wearable data for each day during the 4-week data collection. In each sub-folder, there are multiple sessions from different participants. Some participants provided more than 1 session on the same day. The name of each session consists of two parts connected by an underscore: the unique session ID and the participant ID. For example, the session named '1567380164_18' indicates the data is provided by participant 18. There are 6 CSV files in each session, and each of these files (except IBI.csv) has the following format: the first row is the initial time of the session expressed as a Unix timestamp in UTC. The second row is the sample rate expressed in Hz. Specifically: 1. ACC.csv contains data from a 3-axis accelerometer sampled at 32 Hz which is configured to measure accelerations in the range of [−2g, 2 g]. Acceleration is the rate of change of the velocity with respect to time, where SI (International System of Units) 19 derived unit for acceleration is the metre per second squared (m·s −2 ) where 1 g is equal to 9.80665 m·s −2 . The unit in this file is 1/64 g where the raw value of 64 indicates 1 g. The 3 columns refer to the x, y, and z-axis, respectively. 2. BVP.csv contains BVP signals sampled at 64 Hz which is the primary output from the PPG sensor. BVP signals can be used to compute the inter-beat-intervals (IBI) and heart rate (HR). 3. EDA.csv contains data from an electrodermal activity (EDA) sensor expressed as micro siemens (μS) sampled at 4 Hz. The variation of EDA values indicates the electrical changes of the skin surface and the EDA arises when the skin receives nerve signals from the brain and sweat level increases 20 .  www.nature.com/scientificdata www.nature.com/scientificdata/ 4. HR.csv contains the average heart rate data extracted from the BVP signals, calculated in spans of 10 seconds. The first row is the initial time of the session and it is 10 seconds after the beginning of the recording. The sampling rate of heart rate is 1 Hz. 5. IBI.csv contains the time intervals between a participant's heartbeats extracted from the BVP signals. This file does not have a sampling rate. The first column is the time (with respect to the starting time) of the detected inter-beat interval expressed in seconds (s). The second column is the duration in seconds (s) of the detected inter-beat interval (i.e., the distance in seconds from the previous beat). 6. TEMP.csv contains data from a temperature sensor expressed in degrees Celsius (°C), sampled at 4 Hz.
Class_wearable_data. The Class_wearable_data folder contains 221 sub-folders representing 221 different classes during which the wearable data were recorded. Each sub-folder is named by the unique 'Class_id' as shown in the Class_table.csv. Each sub-folder includes further sub-folders named by the unique participant id or simply the label 'teacher' . These contain data from the wristband sensors for each participant of this class. There are 6 CSV files in each sub-folder: ACC.csv, EDA.csv, BVP.csv, HR.csv, IBI.csv, and TEMP.csv. The format of these files is identical to the ones in the Raw_wearable_data folder.
technical Validation indoor and outdoor environmental data. Tables 5 and 6 show the specifications of the outdoor and indoor weather stations, respectively. Figure 8 shows a sample of data captured from these sensors and the air-conditioning states that we inferred from the data. Figure 9 shows data captured by the indoor weather station. Figure 10 shows data captured by the outdoor weather station. We were not able to find the accuracy of the Philio sensors in their datasheet, but assumed that it was sufficient for the purposes of our study. Figures 11 and 12 demonstrate a potential use case for the longitudinal dataset; here, we fitted different logistic regression models to the air-conditioning usage data. Within the scope of our research, we were not able to validate these models. The figures serve merely as an illustration of what the dataset may be used for.

Fig. 11
An example for an application of the dataset: creating models of occupant behaviour to predict the switching of air-conditioners, for both heating and cooling. The above are examples using simple logistic regression; the left ones use indoor temperature as the independent variable, the right ones use outdoor temperature as the independent variable. www.nature.com/scientificdata www.nature.com/scientificdata/ Wearable signals. In the dataset, wearable signals include EDA, HRV, skin temperature and 3-axis acceleration. The above signals can be utilized to understand people's behaviours, engagement, thermal comfort and emotion. Before the data analysis and modelling, the data cleaning stage needs to be conducted to remove noises and motion artefacts for quality control 21 . Usually, there are several types of noises during the data collection from E4 wristbands 9 : flat responses, abrupt signal drops and quantization errors. Flat responses (i.e., 0 micro siemens) happen when there is poor contact between skin and the wristband, and abrupt signal drops occur with movements of wristbands. The quality of wearable measurements in the dataset has been thoroughly examined.
Missing values. Though physiological signals are mostly error-free for the majority of files in the dataset, a portion of data is missing due to issues of devices or human errors (e.g., poor contact, exhausted battery, unintentionally turning-off wristbands, unwilling to keep wearing wristbands). On average, participants contribute wearable signals for 15 days, with different wearing times during the school day (9:00-15:30). P13 and P16 contribute the least number of wearing days (n = 6) and P21 wear the wristbands for most days (n = 28). Then we calculate the missing values (i.e., 0 micro siemens for EDA signal) due to flat responses or motion artefacts. On average, 2.66% of data is missing for all participants, with P10 having the maximal portion of missing values (27.37%) and P20 having the least missing values (0.01%).
Quality control. Figure 13 shows the EDA signals in the school day for six participants before and after applying quality control. Due to space limitations, we only show the data from six participants where n indicates the number of wearing days of wristbands. The quality control involved the removal of motion artefacts (MAs). The median filter with a 5-second window is applied on EDA signals per school day as in previous research 9 . After quality control, the portion of missing values decreases from 2.66% to 2.46%. To better control the quality of wearable signals, various methods can be applied such as visual inspection 9 , different filters with different settings, shape-based artefacts detection 22 , etc. However, the aforementioned methods for different types of wearable signals (e.g., EDA, HRV) are usually selected or adapted according to the specific needs and purposes of researchers. Most importantly, unlike environmental data, there is no absolute ground truth for the physiological signals (EDA, HRV, and skin temperature) and physical activities (3-axis acceleration) of people in the real world. It does not help much to present a fixed and complete pipeline for the quality control of wearable signals. Therefore we only consider dealing with the missing values with a median filter for the EDA data validation as an example of quality control. www.nature.com/scientificdata www.nature.com/scientificdata/

Usage Notes
Our datasets include the outdoor/indoor/wearable sensing data and the self-report occupants' thermal comfort, learning engagement, and emotions while at school. This dataset is the first publicly available dataset for studying the daily behaviours and engagement of high school students using heterogeneous sensing. For the longitudinal outdoor and indoor sensing data, the most straightforward potential usage is to derive predictive models of how occupants operate room air-conditioning units 23 . Our dataset could potentially be useful to examine the relationships between indoor/outdoor climates and physiological signals of occupants, which provide opportunities for the future design of intelligent feedback systems to benefit both students and staff on campus.
Specifically, various data mining (e.g., segmentation 24 , clustering 25,26 ) and modelling techniques 27-29 could be explored to build prediction models for measuring occupants' mental state using sensor-based physiological and behavioural recordings in buildings. This could be further used for various applications in future studies: (1) Monitoring signs of disengagement and negative emotions of students 9,30 . Measuring the study engagement and emotions of students is beneficial to both teachers and students. Teachers will be able to improve their teaching strategies to create the right learning environment, improve the learning experience for students and re-engage students with low engagement 9,31 . Students will be able to self-track their learning engagement and emotions, which could promote their self-regulation and reflective learning. (2) Studying peer effects in educational settings 32 . It could be helpful to explore group-wise seating behaviours and their relationship to perceived engagement and physiological synchrony 33 . (3) Providing comfortable indoor environments for occupants. It is possible to mitigate the negative effects of hot weather on student learning by using air conditioning 34 , and teachers could ventilate classrooms timely to prevent excess carbon dioxide from affecting students' concentration [35][36][37] .
Some limitations of the datasets need to be addressed. Firstly, Empatica E4 wristbands are susceptible to noises caused by many factors, e.g., loose electrodes and faulty wiring 38 , and other devices such as indoor and outdoor weather stations may also be subject to similar systematic errors. Additionally, the accuracy of measuring physiological and behavioural data using E4 wristbands is limited. Menghini et al. 39 found that similar accuracy could not be achieved when comparing EDA signals between wrists and fingers. Lead wire extension is one promising solution to improve the accuracy of E4 wristbands, which allows EDA recordings to be moved from the wrist to the surface of the fingers or palm, thus eliminating the potential site differences. In our data collection, using the E4 wristband is the best option for collecting data from student and teacher participants on-site without putting an extra burden on them. Finally, besides the quality control for EDA measurements, additional measures could be further employed to validate the collected data (e.g., self-report data and other physiological signals) through appropriately designed studies.

code availability
Python code for prepossessing the data and implementing the segmentation based on different classes are available online https://github.com/cruiseresearchgroup/InGauge-and-EnGage-Datasets.

acknowledgements
This research is supported by the Australian Government through the Australian Research Council's Linkage Projects funding scheme (project LP150100246 in partnership with Aurecon). This paper is also a contribution to the IEA EBC Annex 79.

author contributions
N.G. designed, prepared, and conducted the cross-sectional study for wearable data collection, analysed the wearable and indoor sensor data, and wrote the manuscript. M.M. designed, prepared and conducted the longitudinal data collection for outdoor and indoor sensing, and processed the dataset and wrote the manuscript. J.B., S.W. and F.D.S. supervised the data collection, dataset design, and revised the manuscript. F.D.S. advised N.G. on the overall project and data analysis and modelling.