Global land projection based on plant functional types with a 1-km resolution under socio-climatic scenarios

This study presents a global land projection dataset with a 1-km resolution that comprises 20 land types for 2015–2100, adopting the latest IPCC coupling socioeconomic and climate change scenarios, SSP-RCP. This dataset was produced by combining the top-down land demand constraints afforded by the CMIP6 official dataset and a bottom-up spatial simulation executed via cellular automata. Based on the climate data, we further subdivided the simulation products’ land types into 20 plant functional types (PFTs), which well meets the needs of climate models for input data. The results show that our global land simulation yields a satisfactory accuracy (Kappa = 0.864, OA = 0.929 and FoM = 0.102). Furthermore, our dataset well fits the latest climate research based on the SSP-RCP scenarios. Particularly, due to the advantages of fine resolution, latest scenarios and numerous land types, our dataset provides powerful data support for environmental impact assessment and climate research, including but not limited to climate models.


Background & Summary
Since the industrial revolution, human activities have continuously strengthened in scope and intensity and have substantially impacted regional-and global-scale land-use and land-cover changes (LUCCs) 1,2 . Moreover, this trend is expected continue in the foreseeable future 3,4 . Scenario-based simulations of future land changes can provide important evaluation information on the effect of land policies under different conditions. Thus, they have become a powerful tool for analysing potential future land-use changes 5 . Furthermore, from the ongoing global climate change perspective, scenario-based future land change simulations can provide an essential reference for environmental change risk assessment 6 . Moreover, land simulation products are an essential driving factor for climate models 7 .
To better coordinate international climate research, Phase 6 of the Coupled Model Intercomparison Project (CMIP6) used the latest group of coupled scenarios, the SSP-RCP scenarios 8 . Using these scenarios, different scholars can establish universal and comparable climate studies. In the coupled scenario, shared socioeconomic pathways (SSPs) consider the future social and economic possibilities from population, economy, policy and technology perspectives 9 . Representative concentration pathways (RCPs) employ radiative forcing as an indicator to describe future climate change possibilities 10 . Different SSPs and RCPs can form a scenario matrix comprising numerous coupled scenarios. Therefore, CMIP6 recommends some of the most likely scenarios as critical SSP-RCP scenarios to sharpen the research focus. Herein, we focus on the seven coupling scenarios with the highest priority, Tier 1 and Tier 2 levels, designated by CMIP6, and one coupling scenario that is specially added to achieve the goal of temperature increase below 1.5°C (SSP1-1.9) 11 . Tier 1 level scenarios include SSP1-2.6, SSP2-4.5, SSP3-7.0 and SSP5-8.5, while Tier 2 level scenarios include SSP4-3.4, SSP4-6.0 and SSP5-3.4-OS (hereinafter, abbreviated as SSP5-3.4). Fig. 1 shows the creation process of a future land dataset. The process can be divided into three parts. The first part is the estimation of the future area demands for different land types under different SSP-RCP scenarios. The second part is the implementation of a 1-km spatial land simulation using the future land use simulation (FLUS) model under the macro constraints of the demands. The FLUS model is discussed below. At this point, a future LULC dataset containing seven land types is afforded. Furthermore, in the third part, we subdivide the land types to form a future land dataset of SSP-RCP scenarios with a 1-km resolution based on PFT classification. estimating future land demand. CMIP6 affords a set of officially recommended future land-use datasets, LUH2 (Land-Use Harmonization 2) 4 , which is available for free at http://luh.umd.edu/index.shtml. We downloaded the LUH2 v2f Release with tree cover correction files on 25 February 2019. This dataset comprises a global projection of multiple land types for successive years from 2015 to 2100 under different SSP-RCP scenarios with a 0.25° resolution (approximately 25 km at the equator). Considering CMIP6, the recommended land-use prediction results for different SSP-RCP scenarios have been provided using different integrated assessment models (IAMs) created by different research teams 25 . IAMs are a class of integrated models that integrate relevant models developed in various disciplines, such as energy, economics, atmospheric chemistry, climate and ecology by constructing representative sectors 26 . One IAM can project several SSP-RCP scenarios 3,27-30 . In the official future land-use datasets, however, a specific SSP only corresponds to a recommended IAM, which also affords RCPs coupling with this SSP, i.e. IMAGE model for SSP1 31 , MESSAGE-GLOBIOM model for SSP2 29 , AIM model for SSP3 28 , GCAM model for SSP4 30 and REMIND-MAGPIE model for SSP5 27 . Notably, LUH2 integrates the results afforded by different IAMs so that they have the same initial land-use distribution. Nevertheless, specific conversions are required before it can be used to support our land simulation because of its particular land classification and coarse resolution.

Method
First, we mapped the land classification from LUH2 to the classification used in our simulation, which is based on the ESA-CCI land cover data from 2015. Table 1 shows the specific corresponding relation. The land types in LUH2 are combined into seven classes, wherein water and permanent ice and snow remain unchanged in the simulation.
Second, statistics on the land demand trends in LUH2 for each scenario and region were compiled. We divided the world into 31 regions by referring to the SSP official database's partitions 32 (https://tntcat.iiasa.ac.at/ SspDb, accessed on 20 September 2018, see Figure S1). The partition principles were mainly as follows: First, since countries with different development states tend to adopt different policies, countries with similar development status were divided into the same region. Second, considering spatial heterogeneity, spatially neighbouring countries were preferentially divided into the same region. To deal with the area gap between LUH2 and ESA-CCI land cover data in the initial year, 2015, the land change trends from LUH2 were extracted to calibrate the future land demands.
The calibration can be further subdivided: preliminary calibration and harmonisation of the total area. The preliminary future land demand based on the 2015 ESA-CCI land cover data was calibrated considering the land change trend in LUH2. The equation is as follows: (1)   www.nature.com/scientificdata www.nature.com/scientificdata/ where ′ Area r j t , represents the preliminary calibrated demand for land type j in region r at time t. Additionally, rate r j t , ∆ denotes the net change rate of the area of land type j in region r from time t−1 to t in LUH2. LUH 2 r j t , 1 − denotes the area of land type j in region r at time t−1 in LUH2. Through such calibration, the illogical drastic fluctuations of land demands caused by the difference in the initial area in different products can be reduced while maintaining the original trend of LUH2. As an exception, Eq. 2 was applied to urban land since it represents a small fraction of the land, and this study assumes that urban land does not shrink at the 1-km scale.
Second is the harmonisation of the total land area. The total land area after preliminary calibration may be inconsistent with the actual total land area. Therefore, we adjusted the areas of the various land types obtained from the preliminary calibration using a proportion-based approach to render their total areas equal to the actual total land areas. Note that urban land was not considered in the adjustment because of its small proportion. The equation for the adjustment is as follows: where Area r j t , represents the adjusted demand for land type j in region r at time t, U denotes urban land and Area r total represents the actual total land area of region r. The adjusted future land-use demands were used as simulation targets for different scenarios and as constraint conditions for iteration termination when performing future land-use simulations.
Simulating future land dynamic. Herein, we used the FLUS model to simulate future land-use dynamics.
It is a widely used land simulation model that effectively simulates land-use change at global and regional scale [33][34][35][36][37] . Furthermore, it can be coupled with IAMs and system dynamics models. It has been successfully applied to the long-term simulation of global land cover change under the SRES scenario 17 and the simulation of global urban land change under SSPs from 2015 to 2100 38 , reflecting its reliable computing capabilities. Compared to traditional cellular automata (CA), the FLUS model has the following advantages: First, it uses a roulette selection mechanism to determine the state of each cell changes, which can adequately reflect the competition and randomness of various land types in reality. Simultaneously, it eliminates the drawbacks of traditional CA, which requires researchers to subjectively set thresholds. Second, the FLUS model adopts adaptive inertia coefficients; thus, the iteration speed can be automatically adjusted according to the difference between the existing land area and the target land area after each iteration. Thereby, the FLUS model eliminates the subjective setting of iterative speed parameters in traditional CA. Equation 4 expresses the execution of the FLUS model 37 : where TP i j , represents the total probability of grid cell i becoming land type j. Pg i j , represents the suitability probability of land type j on grid cell i. neighbor i j , represents the neighbourhood effect of land type j around grid cell i, and it is positively related to the number of grids of land type j around grid cell i. Moreover, inertia j represents the adaptive inertia coefficient of land type j, and cons k j → represents the constraint of changing from the current land type k to land type j. That is, its value is 1 when such conversion is allowed; otherwise, it is 0. Herein, water bodies and permanent ice and snow are frozen, and urban land cannot change to other land types.
The estimation of the suitability probability is the key for ensuring the effective execution of the FLUS model. The FLUS model employs artificial neural networks (ANNs) to train and estimate the suitability probabilities of various land types 37 . Since our research comprises numerous land types, including artificial land (such as urban) and natural land (such as woodland, grassland and wasteland), we need to select appropriate spatial driving factors and input them into the ANNs to drive the suitability probability estimation. Regarding the existing land simulation studies 5,39-41 , we selected a series of relevant spatial driving factors, such as socioeconomic (GDP, population, urban centre and road) and physical (temperature, precipitation, topography and soil quality) factors. We selected the driving factors that are close in time to the initial year of our simulation. Furthermore, the driving factors' original resolutions are as close as possible to 1 km, except for the soil quality factor (5′ resolution). Nevertheless, since the soil's spatial heterogeneity is not as prominent as factors such as population and GDP, a 5′ resolution (approximately 10 km on the equator) is also acceptable. Table 2 shows the spatial driving factors used herein. All these factors were resampled to 1-km resolution before being input to the ANN for training and evaluation.
The FLUS model software (GeoSOS-FLUS V2.4) 37 for performing future land change simulations can be downloaded for free from http://www.geosimulation.cn/FLUS.html. The FLUS Model module of the software can implement the operations of this subsection. First, we estimated each land type's suitability probability (also called Probability-of-occurrence) in each region separately by inputting the corresponding land data and spatial driving factors. Then, we executed the land use simulation by region using the FLUS model under the SSP-RCPs land demand constraints. The simulation was performed with a 1-km resolution for 2015-2100, with 5-year intervals.
Creating plant functional types (PFT) product. The PFT classification used in the CLM model 7 is used as a reference to create our future global PFT dataset based on previous land simulation results. Each grid unit www.nature.com/scientificdata www.nature.com/scientificdata/ comprises five landunits in the CLM model: glacier, lake, wetland, vegetated and urban. Since we do not simulate the changes of glaciers and water bodies, the first three landunits can be frozen in the initial year data of the ESA-CCI dataset. Next, the CLM model subdivides the vegetated types, especially forest and grassland, into 15 PFTs. Thus, we referred to the method proposed by Bonan et al. 42 and used historical average climate data and coarse-classified vegetated distribution data for subdividing forest and grassland into 15 corresponding PFTs. Subsequently, a future global land cover product based on PFT classification containing 20 land types was afforded. Figure 2 shows the workflow.
As shown in Figure 2, barren, cropland, urban, water and permanent snow and ice can be directly retained from the previous land simulation results. Therefore, the land subdivision based on PFT can be divided into two parts: forests and grasslands.
Subdivision for forest-type PFTs. Forest-type PFTs were subdivided into two steps. First, based on the 2015 ESA-CCI land cover data and the nearest neighbour principle, each forest-type grid in the future years in each SSP-RCP scenario was assigned to one of the five preliminary forest-type PFTs (i.e. broadleaf evergreen tree, broadleaf deciduous tree, needleleaf evergreen tree, needleleaf deciduous tree and shrub). The nearest neighbour principle is the most straightforward method for judging the potential of forest-type PFT. Second, the five preliminary PFTs were further subdivided into 11 types of forest-type PFTs using historical average climate data. The 1-km global historical average climate dataset provided by WorldClim 43 (version 2.0, download on 3 July 2018, https://worldclim.org/) was employed. This dataset comprises the average monthly climate indicators for 30 years (1970-2000), such as average temperature, maximum temperature, minimum temperature, precipitation and solar radiation. Additionally, to achieve reliable accuracies, it uses climate information from 9,000 to 60,000 weather stations worldwide and the MODIS platform 43 .
The effect of the first step is shown in Fig. 3. After the preliminary forest-type PFTs were subdivided, the method proposed by Bonan et al. 42 was used to further subdivide them into 11 forest-type PFTs according to different climate rules (Table 3).
In Table 3, T c is the average temperature in the coldest month, T w is the average temperature in the warmest month, P ann is the average annual precipitation, P win is the average precipitation in the winter half year (referring to November-April of the following year in the northern hemisphere and May-October in the southern hemisphere) and GDD (growing-degree day) is the annual accumulated temperature of days over 5°C 42 . The daily GDD, GDD d , can be expressed as follow: GDD is the sum of GDD d in one year. T d is the daily average temperature. T b is the base temperature of crop development, which is set as 5°C here. However, the WorldClim dataset does not provide historical daily average temperatures. Therefore, when calculating GDD, a trade-off method was adopted. That is, T d was replaced with the monthly average temperature, and then, the calculated GDD d was multiplied by the number of days in the corresponding month. The historical average climate data used for subdividing forest-type PFTs are shown in Figure S2~S6.

Spatial Variables
Year  www.nature.com/scientificdata www.nature.com/scientificdata/ Subdivision for grassland-type PFTs. Specific climatic rules were also adopted to subdivide grassland-type PFTs. Grassland-type PFTs were subdivided into arctic C3 grass, C3 grass and C4 grass in the CLM model. Different grasslands are located in regions with different climatic characteristics. Considering the method proposed by Bonan et al. 42 , we used the climate rules shown in Table 4 to subdivide the grassland-type PFTs.
In Table 4, P mon represents monthly precipitation. Additionally, the meanings and corresponding data of other abbreviations are the same as in Table 3. Mixed C3/C4 grass denotes that both C3 and C4 grasses account for 50% of a 1-km grid. The historical average data of precipitation in the driest month are shown in Figure S7.

Data Records
Two land datasets from 2015 to 2100 with 5-year intervals were created herein under the following SSP-RCP scenarios: 1) 1-km global land dataset comprising seven land types and 2) 1-km global PFT-based land dataset comprising 20 land types. Both land datasets are publicly available and open source at https://doi.org/10.5281/ zenodo.4584775 44 or http://www.geosimulation.cn/Global-SSP-RCP-LUCC-Product.html. All files in the datasets are in single-band GeoTIFF format, representing one year of a scenario. GeoTIFF files can be processed in ArcGIS and using programming languages such as Python. Moreover, some extension packages, such as the GDAL package for Python, can make the handling of these GeoTIFF files easy.

technical Validation
Future land demand. After extracting and calibrating the LUH2 dataset, we obtained the demands for each land type in the 31 regions of the world from 2015 to 2100 under the SSP-RCP scenarios used during the land change simulations. To demonstrate the effect of calibrating the land demands provided by LUH2, the land demands and their trajectories were compared on a global scale (Fig. 4). www.nature.com/scientificdata www.nature.com/scientificdata/    www.nature.com/scientificdata www.nature.com/scientificdata/ As shown in Fig. 4, the two-step calibration of LUH2 data yields satisfactory results. The results show that our adjusted land demands for each land type in each scenario are maintained highly similar to that in LUH2. That is, the trajectory of each land type in each scenario in LUH2 is well preserved. Moreover, for the gaps between our dataset and LUH2 in the area of different land types in the initial year, with some relatively large gaps, the change ranges of our adjusted land demands are comparable to LUH2. Therefore, the land demands in our land change simulation fully reflect the macro constraints on land change caused by SSP-RCPs' storyline. Simultaneously, these projected demands are consistent and comparable with land projections made by various IAMs in CMIP6. www.nature.com/scientificdata www.nature.com/scientificdata/ Validation of the land simulation. To validate the land simulation accuracy, historical simulations were independently conducted on the 31 regions and the obtained accuracies were evaluated. The historical simulation spanning from 1992 to 2015 reflects the long-term simulation performance of our model. The land data observed in 1992 also stem from the ESA-CCI land dataset. It is merged into seven land types according to the corresponding relationship in Table 1 and resampled to 1-km resolution. We assumed that physical conditions, such as topography, temperature, precipitation and soil, did not significantly change in two decades. Similarly, socioeconomic factors such as GDP and population did not significantly change in the spatial distribution pattern. Therefore, we employed the same spatial driving factor dataset to estimate the seven land types' suitability Accuracy of the suitability probability. Suitability probability is an essential part of the FLUS model. As shown in Fig. 5, we selected three representative regions (China, USA and Brazil) containing comprehensive land types to exhibit the spatial distribution of suitability probabilities in the historical land simulation. The results show that the spatial distributions of the suitability probabilities achieve good results in each region. Moreover, the suitability probability distribution of each land type generally coincided with the observed land pattern. The suitability probability's spatial pattern shows that the suitability probability is relatively high in places where a specific land type is concentrated. However, the converse is observed in places where specific land types are scattered.
To quantify the suitability probability's accuracy, we employed the receiver operating characteristic (ROC) curve as a detection tool. The area under the curve (AUC) from the ROC curve was used to measure the suitability probability's accuracy. AUC ranged between 0 and 1. The larger the value, the higher the accuracy. We uniformly sampled each land type according to 10% of the total number of grids in each region and evaluated the accuracies shown in Table 5. Figures S8-S12  Since less grassland is present in this region, this low AUC value has a limited impact on the land simulation's accuracy. Generally, the AUC of the suitability probabilities reached the desired accuracy in each region and each land type.  Table 5. AUC of the suitability probability in each region and each land type.
www.nature.com/scientificdata www.nature.com/scientificdata/ Accuracy of the land simulation. Fig. 6 shows the comparison of the land pattern in 2015 obtained from the historical land simulation and the observed land data. The figure shows that the simulated land pattern is similar to the observed land pattern. The land simulations perform reasonably well. To further quantitatively evaluate the land simulation's accuracy, the three commonly used accuracy indicators, the Kappa coefficient, overall accuracy (OA) and Figure of Merit (FoM), were used. Table 6 lists each region's Kappa coefficient, OA and FoM in the historical land simulation. The spatial distributions are shown in Figures S13-S15. From the overall results of the 31 regions, the Kappa coefficient is 0.864, OA is 0.929 and FoM is 0.102. Thus, the simulations afford high accuracy in terms of the Kappa coefficient and OA. However, the low FoM needs to be examined. According to related literature, an FoM value in the 0.1-0.3 range is an acceptable result 17,45 , because FoM stringently measures the simulation accuracy. It only evaluates the part of the land that changes. Moreover, the FoM value is proportional to the proportion of land observed to change in the simulated region. This proportional relationship can generally reach 1.5:1. That is, when the proportion of land observed to change is 10%, the FoM of a good simulation result can reach 0.15 46 . In our historical land simulations, the observed global land changed from 1992 to 2015 accounted for only 3.10%, but the average FoM value reached 0.102. This accuracy is better than the general proportional relationship level, indicating that our land simulation's accuracy is acceptable.

Comparison of land cover representation in 1-km and coarse resolutions.
To test the superiority of our global LUCC product relative to the existing global LUCC products in terms of the spatial resolution, we selected a small-scale region to compare the effects of using different resolutions. We chose several resolutions that are commonly used in current global LUCC products, including 5′ (approximately 10 km on the equator) used by IMAGE 3.0 13 , LUSs 12 and CLUMondo model 47 , 0.25° (~25 km on the equator) in the fractional form used by LUH2 4 and 0.5° (~50 km on the equator) used by IMAGE 2.4 48 . Fig. 7 shows a comparison of our 1-km resolution product and these coarse resolutions. Furthermore, Fig. 7 shows the simulation results for 2050 for the middle road (SSP2-4.5) of the eight scenarios, highlighting the San Francisco metropolitan area in the USA. In addition to showing the representation in our 1-km product (Fig. 7a), representations in the 10-km resolution (Fig. 7b), 25-km resolution in fractional form (Fig. 7c) and 50-km resolution (Fig. 7d) are shown via resampling. Clearly, the use of land products with 10-km or coarser resolution merges many small patches of urban land (shown in dark red in Fig. 7 a,b,d) into other land types, causing a loss of urban spatial detail. Moreover, the www.nature.com/scientificdata www.nature.com/scientificdata/ 10-km resolution results are unable to depict the spatially intertwined pattern in the zones where different land types transition. The 25-km resolution in fractional form also loses considerable spatial detail when describing the forest. For the 50-km resolution, the spatial distribution of land cover in this metropolitan area can be represented using only 20 or so grids.
Performance of the simulation of future land dynamics. We created a 1-km resolution global land dataset under SSP-RCP scenarios at 5-year intervals from 2015 to 2100, comprising seven land types, through future land simulations. To strengthen the land change visualisation, we counted and displayed the area of land change (km 2 ) on each 10 × 10 km 2 grid by 2100.  Table 6. Kappa coefficient, OA and FOM of the historical land simulation in each region. www.nature.com/scientificdata www.nature.com/scientificdata/ Taking grassland as an example, we selected the prairie in the central USA as a representative area to show its spatial changes between 2015 and 2100 (Fig. 8). The red grid in Fig. 8 represents grassland reduction, and the green grid represents grassland expansion. The figure clearly shows that different socioeconomic and climate policies affect grassland changes 4 .
Under the two coupled scenarios of SSP1, the green development road, animal product consumption reduction caused a decrease in pasture demand. Simultaneously, cropland increased with the use of biomass energy. Therefore, under the background of the total reduction of grassland in the USA, the grassland in the grasslandcropland junction area clearly decreased, but a relatively noticeable increase was observed inside the grassland area (SSP1-1.9 and SSP1-2.6 in Fig. 8). In the SSP3 scenario, although factors such as a high proportion of animals in the diet promote an increase in grassland (pasture), the USA has a slow-developing economy and the smallest population among the five SSP scenarios. The two opposing factors cause a slight rise in grassland demand. Therefore, the prairie of the central USA remains relatively stable under SSP3-7.0, and the areas of increase and decrease are balanced. Under the SSP5 scenarios, rapid population and economic growth generate a strong demand growth in food and feed. However, due to the rapid development of agricultural technology and the high intensification of the livestock production system, under SSP5-8.5, the USA's grassland area remains www.nature.com/scientificdata www.nature.com/scientificdata/ stable, displaying a low intensity of grassland spatial changes (SSP5-8.5 in Fig. 8). However, under SSP5-3.4, to achieve the goal of net-zero CO 2 emission, the scenario supposes that the second-generation bioenergy crops will be widely promoted after 2040 11 . Therefore, the grassland area in the USA will drastically decrease. This is manifested in the large-scale encroachment of grassland by cropland in the grassland-cropland junction area in central USA (SSP5-3.4 in Fig. 8). A similar situation also occurs in SSP4-3.4. Nevertheless, the difference is that cropland most severely encroaches on grassland due to its lack of an intensive production system (SSP4-3.4 in Fig. 8).
We selected a cropland agglomeration area near the Gulf of Guinea in western Africa as a representative area to stimulate the spatial changes of cropland from 2015 to 2100 (Fig. 9). This area is located in the SSA-L region (i.e. a low-income country in sub-Saharan Africa), and it is the main cropland production area in SSA-L. As SSA-L is expected to have a substantial population growth ranging from 98% to 340% under all SSPs by 2100 49 , food demand is expected to inevitably increase. Therefore, the cropland areas of SSA-L increase in varying degrees under different SSPs. Notably, in SSP3-7.0, a regional competition and confrontation scenario, SSA-L exhibits the most dramatic population growth, slow technological development, and hindered international trade, causing the demand for cropland to skyrocket. Therefore, it is manifested as a substantial expansion of cropland to grassland and forest (SSP3-7.0 in Fig. 9). SSP4 is a polarisation scenario, making SSA-L, the www.nature.com/scientificdata www.nature.com/scientificdata/ low-income region, has many similarities in SSP4 and SSP3, such as substantial population growth. However, compared to SSP3, international trade will not be hindered in SSP4. Therefore, depending on the global food supply, SSA-L's cropland demand is slightly lower in SSP4-6.0 than that in SSP3-7.0.
We also selected the forest agglomeration area in central Africa that is centred on the Congo Basin as a representative area to show the forest's spatial changes from 2015 to 2100 under different SSPs (Fig. 10). The Congo Basin is one of the three major tropical rainforest areas in the world. The extensive tropical rain forest and surrounding forest in this area affect the regional as well as global ecosystems. The results show that in the green development road of SSP1 (SSP1-1.9 and SSP1-2.6), the forests in this area are extensively and well protected and the implementation of the biodiversity protection policy has restored them. In the three scenarios corresponding to SSP3 and SSP4, this area suffered the most severe and extensive forest degradation. This was mainly due to the rapid cropland expansion in SSA-L, a low-income region, in SSP3 and SSP4. Further, even the scattered cropland in the forest agglomeration area encroached a large amount of forest.
Performance of the PFT-based land dataset. By subdividing the seven-land-type global land simulation products, we created a 1-km global land cover dataset under the SSP-RCP scenarios based on PFT classification with 20 land types from 2015 to 2100. Figure S16 displays an overview of the PFT-based land dataset. www.nature.com/scientificdata www.nature.com/scientificdata/ To clearly depict the land changes of each PFT under the SSP-RCP scenarios, the proportion of various land types in our global PFT dataset in 2015 and 2100 was compared (Fig. 11). The results show that among the land types, cropland fluctuates the most in different scenarios. The areas of various vegetations also correspondingly change. Additionally, the mixed C3/C4 grass exhibits a relatively obvious decrease in each scenario. This signifies that the encroachment on grassland owing to the cropland expansion mainly occurs near the warm temperate zone, i.e. areas with relatively good hydrothermal conditions. In SSP3-7.0, SSP4-3.4 and SSP5-3.4, where substantial cropland expansion occurs, the temperate broadleaf deciduous shrub, tropical broadleaf deciduous tree and temperate broadleaf deciduous tree relatively considerably decrease.

Usage Notes
This study generated two 1-km future global LULC datasets from 2015 to 2100 with 5-year intervals under SSP-RCP scenarios, one comprising seven broad land types and the other comprising 20 PFT-based land types. The validation by performing historical land simulation revealed that the model affords excellent accuracy in all regions (on average, Kappa coefficient = 0.864, OA = 0.929 and FoM = 0.102). Moreover, our future datasets' land changes appropriately reflect the storyline's impact of SSP-RCP scenarios on the land cover. Therefore, we hope these two datasets, especially the PFT-based one, will better support environmental impact analysis and climate-related research under the latest climate scenarios.
Our datasets have the following advantages. First, due to the 1-km resolution, our datasets can map spatial details and reduce spatial uncertainty better than the existing global SSP-RCPs datasets, such as the 0.25° LUH2. Particularly, the spatial pattern of urban land is well preserved in our datasets. Second, our PFT-based dataset provides more plentiful land type information than the current fine-resolution future global land datasets, which usually contain only a few land types. Moreover, PFT-based land data are more valuable than broad land types data in the study of climate models. Therefore, our PFT-based dataset can be widely used in climate change research. Third, since our datasets adopt SSP-RCP scenarios and refer to the projected future land demand trajectories in LUH2, they are comparable with the official land dataset of CMIP6, which makes our datasets authoritative and universally applicable.
However, our datasets have several limitations. Users should evaluate whether these limitations affect them. First, the land cover classification accuracy from ESA-CCI data that was employed herein as the initial land data may yield potential errors in future land projections. Second, the spatial driving factors for future land simulation and the subdivision for the PFT-based dataset are not time varying, which is mainly limited by data availability. Moreover, spatial data for future global socioeconomic and soil drivers under SSP-RCPs are unavailable, and spatial data for future temperature and precipitation under SSP-RCPs suffer from coarse resolutions and insufficiently included scenarios. This limitation may cause local-scale deviations in depicting the land distributions from the scenario assumptions in our datasets, despite maintaining overall distribution reliability through suitability probabilities. We will resolve this limitation and update our datasets when the relevant spatial diver data based on SSP-RCPs become available. Third, like LUH2, water and permanent snow and ice in our datasets remain constant in the future. In reality, however, although they cover only a tiny fraction of the global continent, this may still have implications for researchers in specific fields, such as those concerned with snow and ice cover changes. Fourth, the spatial drivers used in our land simulation do not encompass all aspects, although various elements like socioeconomic, geomorphological, soil and climatic have been considered herein. For example, although precipitation, topography and soil quality, which can reflect water availability for crops to some extent, have been considered, they do not cover all the factors affecting cultivation, such as the distribution of agricultural infrastructure. Therefore, if a particular driver that a user is focusing on is not included in our spatial drivers, then our datasets may not be appropriate for them. www.nature.com/scientificdata www.nature.com/scientificdata/

Code availability
The land simulation in this study was performed by the FLUS model software (GeoSOS-FLUS V2.4), which can be downloaded for free from http://www.geosimulation.cn/FLUS.html. Meanwhile, the tutorial on the operation of this software can be found in the user manual at this URL. The other spatial calculations and analyses in this study were performed by ArcGIS software as described in the Method section. The spatial data used for input are all publicly available online, with sources cited within the manuscript.