Background & Summary

Enhanced earth observation and analytical capabilities have revolutionised the way we view our planet, allowing a global perspective that has the potential to dramatically influence the way humanity manages finite planetary resources1. Yet for coral reefs, a valuable and rapidly degrading ecosystem2,3, these accelerating capabilities to collect and analyse data are not often translated into improved environmental outcomes4. One barrier is the transfer of insights gained from remote sensing data from producers (remote sensing scientists) to end-users (reef managers, policy makers, conservation practitioners). Translation of remotely collected observations of coral reefs into user-friendly spatial information for investigation, monitoring, planning and management requires a classification system to discretise continuous data about natural phenomena into spatial units of manageable information.

Classification is a key process for making data accessible to people that need it5. Maps are an efficient way to share large amounts of spatial data, but to be effective they must be underpinned by a classification framework that a) follows a clear and transparent rationale (transparency), b) defines classes that are meaningful for the application (relevance), c) is clearly and unambiguously described (clarity) and is d) discoverable and intuitive to interpret end-users (accessibility). The latter is particularly important if information is to be meaningfully integrated into practical solutions founded on map data5.

Classification of coral reef geomorphology has typically occurred using two broad approaches, which are largely congruent6, but diverge in places owing to the disciplinary approach, methodology employed, datasets used, and the scale and scope of investigation. For centuries, traditional reef classification has involved an a priori grouping of natural features into classes based on detailed field observations and expert knowledge, often drawing from multiple disciplines, and making use of diverse ecological and geological datasets (e.g. drill cores, bathymetry readings, ecological benthic data) and natural history theory (Expert-led classification, Fig. 1)7,8. These natural history classifications draw from a breadth of understanding of reef development and ecology, but have sometimes lacked a standardised approach (e.g. compared to highly regulated knowledge structures such as taxonomic classification of organisms, linguistics or computer science9), due to difficulties of integrating diverse information sources and complex knowledge. Divergent geographic, linguistic and disciplinary lenses have occasionally caused divergence in a) nomenclature (terminology of reef features), b) structure (how some of these features are grouped) and c) meaning (how terms are interpreted and their relevance for practical research). For example, the term Back Reef can be interpreted in many ways10. Back Reef may be understood differently by an ecologist vs a geologist, or a Caribbean vs a Pacific-based researcher, or have a different relevance to a conservation practitioner vs ecosystem modeller.

Fig. 1
figure 1

Different scales (global vs local) and scientific approaches (direct field measurements vs remote satellite observations) for capturing natural variability of morphological reef features can shape our understanding of how reefs are structured. Coral reef habitat maps, like the Allen Coral Atlas, NOAA’s Biogeography of Coral Reef maps, Living Oceans Foundation and Millennium Coral Reef Mapping Project, aim to distil the vibrant natural diversity of coral reef ecosystems into clustered information that is relevant, interpretable and useful to humans, so regional-to-global scale patterns of variability can be widely disseminated. A classification system for coral reef zones should try to integrate (1) decades of local scientific knowledge on coral reef systems, with the (2) global-scale information that is becoming more accessible from satellite sensors and information derived from these products, to (3) generate map classes that can inform understanding or management of coral reefs.

Full size image

In the last 40 years, technological advancements in the field of remote sensing have led to a different approach to reef classification11. Specifically for scaling habitat mapping from remote sensing, this largely computational approach (Machine-led classification, Fig. 1), involves the a posteriori seascape-scale grouping of pixels into classes, often using probability-based sampling of a one or two broad-coverage remote sensing datasets (e.g., spectral reflectance, bathymetry)12. Classification methods developed by remote sensing scientists have driven rapid expansion of reef mapping efforts from reef-scale to ocean-scale extents13. However, these approaches are known to be limited by the spatial, spectral, radiometric and temporal resolutions of source data used in the classifications14, and sometimes do not adequately consider the wealth of natural history, existing “traditional” coral reef classifications and associated terminology, or the requirements of users.

Computers are revolutionising our ability to classify multidimensional data sources and are allowing mapping and modelling at far greater scales than previously possible using expert-led approaches. However, careful consideration of machine-led classifications and how they align with traditional reef knowledge is vital in ensuring this expanding ability to map is still generating products that support the practical needs of the science and conservation community. Three challenges related to remote sensing classifications can hamper effective use of new generation coral reef maps.

  1. 1.

    The first challenge relates to divergence in how a natural scientist or manager understands a complex system, and how that system can be characterized by biophysical data layers (e.g., satellite imagery, physical and environmental data layers). A mismatch can undermine the relevance of the map product being created to potential users.

  2. 2.

    Secondly, a lack of transparency about classification processes is a prevalent problem in large scale mapping and can be a barrier to effective use of maps. A recent study found just 32% of publications provided sufficient information to replicate a series of mapping studies (99/304 published studies reviewed15). Lack of transparency may confound interpretation of classes by users.

  3. 3.

    The third challenge relates to communication: map classes are frequently not sufficiently defined or described (clarity) or made available to users (accessibility). A recent review found that only 52% of satellite-derived coral reef and seagrass habitat maps were accompanied by a detailed class descriptor that would allow users to interpret mapped classes (49/72 published coral reef and seagrass habitat maps16).

To address these challenges we have developed Reef Cover, a classification system consisting of 17 shallow tropical coral reef internal geomorphic class descriptors. Developed specifically for regional-to-global reef mapping to support science and conservation, classes are transferable between two domains: the traditional ecological-biophysical perspective and the earth observations systems view of reefs (Fig. 1). The classification aims to bridge disciplinary gaps by focussing on attributes of reef features that can be mapped from most remotely-sensed data (Methods: Step 2), while simultaneously aligning with foundational geo-ecological understanding of reef morphology (Methods: Step 1)17. Class definitions were developed with users in mind (Methods: Step 3), and accessibility issues were addressed by making Reef Cover’s detailed descriptors, user-friendly, simple, open access and freely available.

Finally, to demonstrate the application of Reef Cover, the classification was trialled in two mapping exercises (see Technical Validation). Reef Cover’s success was evaluated on how effectively it has been used to support creators of large-scale coral reef maps to generate products that have promoted management and conservation outcomes for reefs.

Methods

Reef Cover was specifically developed to support the process used to produce and deliver globally applicable coral reef mapping products from remotely sensed data16. The typology acts as a key to bridge historic and contemporary knowledge, plot-scale and aerial viewpoints, and pixel data with natural history to convert pixel data into information in a form suitable for reef management decisions. Accompanying case-studies18,19 we use to demonstrate its application are also publicly available. The mapping products described in each case study were developed specifically using Reef Cover to support science and conservation of coral reef ecosystems.

We sought to develop a robust system which balances the geomorphic complexity of reefs with the need to develop high accuracy maps of each class in the system. The result is a 17-class system that can be (i) applied to remote sensing datasets for future mapping, (ii) used to interpret coral reef maps (iii) effectively disseminated to users – mainly in coral reef ecology and conservation space – in a way that promotes research and conservation.

Three steps were used in the development of the classification scheme.

  1. 1.

    Step 1. Review. Existing coral reef geomorphic classification schemes (expert-led classifications from Darwin’s 1842 reef classification20 to the Millennium Coral Reef Mapping Project classification21) were carefully reviewed22 to identify synergies in terminology and definitions for reef features, and evaluate how well common features can be described in terms of remote sensing biophysical data. The review allowed us to develop a set of classes that build constructively on previous foundational knowledge on coral reef geomorphology and are relatable to existing mapping and classification efforts, and addresses the challenge of relevance.

  2. 2.

    Step 2. Development. Reef Cover classes were then derived from attributes data, building on established machine-led reef mapping theory13. Physical attributes datasets commonly available to remote sensing scientists were examined to refine a set of 17 meaningful internal reef classes that relate to broader interpretation from a natural history point of view, gathered in Step 1. A workshop was organised to gather feedback on classes. Clarity around how each class relates to attribute data addresses the challenge of transparency.

  3. 3.

    Step 3. Dissemination. Reef Cover classes were then documented23 in a way to promote re-use and cross-walking, with a strong focus on needs of the users, to address the challenges of clarity and accessibility. Development of the Reef Cover document considers and details the 1) relevance e.g. rationale behind why it was important to map this class, but also broader global applicability of the class, 2) simplicity e.g., promoting user-uptake by employing plain language, not over-complicating descriptors and limiting the number of classes to manageable amount, 3) transparency supplying methodological basis behind each class, and exploring caveats and ambiguities in interpretation, 4) accessibility including discoverability, open access and language translations to support users, and 5) flexibility allowing for flexible use of the scheme depending on user needs, allowing for flexible interpretation of classes by providing cross-walk to other schemes and existing maps, and making the classification adaptable, and open to user feedback (versioning).

Finally, as a proof-of-concept the Reef Cover classification was tested in two large scale coral reef mapping exercises: one in the Great Barrier Reef 24 (Case Study 1) and one across Micronesia19 (Case Study 2, Technical Validation section). During this process, the Reef Cover dataset was reviewed to assess how useful it was for both a) producers using Reef Cover to map large coral reef areas from satellite data, and b) consumers using Reef Cover to interpret map products for application to real world problems.

Step 1. Review. Building global classes on foundational reef mapping and classification work

Global reef mapping: the need for a geomorphic classification to map coral reefs at scale

Coral reefs represent pockets of biodiversity that are widely dispersed, often remote/inaccessible and globally threatened2,3. Communities and economies are highly dependent on the ecosystem services they provide25,26,27. This combination of vulnerability, value and a broad and dispersed global distribution mean global strategies are needed for reef conservation, for which maps (and the classifications that underpin them) play a supporting role. Global coral reef maps have been fundamental to geo-political resource mapping and understanding inequalities28,29, the valuation of reef ecosystem services26, understanding the past30, present31, and future threats to reefs32, supporting more effective conservation33,34 and reef restoration strategies35,36, and facilitating scientific collaborations and research outcomes37. Reef conservation science and practice may particularly benefit from technological advancements that allow delivery of more appropriate map-based information, particularly across broader, more detailed spatial scales and in a consistent manner34,36,38.

Existing expert-led reef classifications

Traditionally, coral reef features have been grouped based on observations of morphological structure, distributions of biota and theories on reef development, gleaned from aerial imagery, bathymetric surveys, geological cores and biological field censuses by natural scientists7,39 (Fig. 1). Natural scientists were struck by both the uniformity and predictability of much of the large-scale three-dimensional geomorphic structure of reefs and biological partitioning across that structure, and how consistent these characteristic geologic and ecological zones were across large biogeographic regions20,40). Technological developments of the 20th century, such as SCUBA demand regulators and compressed air tanks (commercially available in the 1940s41), acoustic imaging for determining seafloor bathymetry (e.g., side-scan sonar developed in the 1950s), light aircraft for aerial photography (first applied in the 1950s42) and lightweight submersible drilling rigs for coring (applied in the 1970s43), allowed reef structure to be viewed from fresh perspectives. New aerial, underwater and internal assessments of reef structure expanded the diversity of external and internal classes, with hundreds of new terms for features defined7,8,10 (Online-Only Table 1). However, the localised nature of most of these applications (Fig. 1) meant that many of the classes developed using these tools were region-specific, leading to experts warning against too heavy a reliance on “the imperfect and perhaps biased existing field knowledge on reefs” for developing global classifications44.

Existing reef classifications derived from satellite data

Shallow water tropical coral reefs are particularly amenable to global mapping from above12. They develop in clear, oligotrophic tropical waters, so many features are detectable from space45. Satellite technology has spawned a wealth of data on reefs, enabling large area coverage, with resolution of within reef variations. Initial approaches to reef mapping in the 1980s expanded our traditional viewpoint from single reef mapping and extent mapping to detailed habitat mapping of whole reef systems46. Through the 1990s and early 2000s evolving field survey techniques described above enabled more effective linkage of ecological surveys to remote sensing data47,48. Accessibility to higher spatial resolution images over larger areas in combination with detailed field data, physical attributes and object-based analysis resulted in large reef area mapping13,21,49,50. In the last five years, the increase in daily to weekly global coverage of this type of imagery, in combination with cloud-based processing capability has expanded to a global capability for reef mapping38. This is a new type of global information that requires a different approach to classification to make sense of complex natural systems at ocean scales.

One of the first steps in creating the Reef Cover classification was reconciling existing classification schemes across the nomenclature driven by disciplinary, linguistic and regional biases. To do this we conducted a review of reef geomorphic classifications, looking for consistencies and usage of terms that transcended divides in discipline22 (see summary in Online-Only Table 1).

Scaling and consistency: choosing an appropriate level for Reef Cover

Remote sensing scientists have been developing automated methods to make sense of the increasing availability of earth observation data over coral reefs, yielding information on ecosystem zones derived from data sources such as spectral reflectance and bathymetry at increasingly larger scales12,51. As more data increasingly reveal the diversity and complexity of reefs, selecting an appropriate level at which to map reefs on the global scale requires balancing the need for a limited number of classes that can be mapped consistently based on available earth observation data, with user need for comparable information.

Reef type classification

Morphological diversity can make global geomorphic classification – particularly between reefs (at the “reef type” level, e.g., Fringing, Atoll reefs) - challenging. Divergent regional morphologies (e.g., Pacific atolls vs Caribbean fringing reefs) and endemic local features (e.g., Bahamian shallow carbonate banks, Maldivian farus) are created by underlying tectonics, antecedent topography, eustatics, climate and reef accretion rates which can all vary geographically52. The diversity of reef types is reflected in the large number of classes defined in the impressive Millennium Coral Reef Mapping Project (68 classes at the between-reef geomorphic level L3), the most comprehensive globally applicable coral reef classification system to date21.

Geomorphic zone classification

Internally, reef morphology becomes a lot more consistent. Physical boundaries in the depth, slope angle and exposure of the reef surface create partitioning into “geomorphic zones” (e.g., Reef Flat, Reef Crest), developed in parallel to the reef edge and coastlines and generally with a distinct ecology17,39,53. These internal patterns of three-dimensional geomorphic structure can be remarkably predictable, even between oceans. This makes geomorphic zonation a good basis for consistent and comparable mapping at regional to global scales54. Moreover, congruence between geomorphic zones and ecological partitioning means that ecological understanding can be derived from geomorphic habitat classes, making geomorphic mapping valuable to conservation practitioners55.

Benthic classification

Many classifications developed for reef mapping (e.g., Living Oceans Foundation49, NOAA Biogeography Reef Mapping Program50), monitoring (Atlantic and Gulf Rapid Reef Assessment56, Reef Cover Classification System57, Reef Check58,59) and management (Marine Ecosystem Benthic Classification60) have included an ecological component. Classifying reef benthos is important as associated metrics, such as abundance of living coral and algae, are widely used indicators of ecosystem change. However, most classifications that consider benthic cover are operational at reef61 to regional scales, due to the need for very high-resolution remote sensing data11 (e.g. from UAVs and CASI62, or high-resolution satellites like QuickBird and WorldView 1 m) to be able to reliably determine classes such as coral cover and type, soft coral, turf, coralline algae, rubble and sand. A comprehensive benthic coral reef classification23 that met the Reef Cover objective of being globally scalable (both in terms of remote sensing biophysical data availability and processing capabilities) but that also fully recognises and includes the rich benthic detail required to address ecological questions at sub-metre scales is beyond the scope of this classification. In the coming years it is likely that further advancements in technology – both downscaling of remote-sensing and up-scaling of field observations63 - will enable us to address this spatial mismatch.

The challenge of creating the Reef Cover classification was to create a set of classes that related to natural science observations, despite using data pulled from remote sensing. Intra-reef zones defined by natural scientists often represent different biophysical /ecological communities that in turn reflect environmental gradients (e.g., in light, water flow) and geo-ecological processes (sediment deposition, reef vertical accretion) below the water that led to the arrangement17. However, these classes frequently also can be related to biophysical information on slope, depth and aspect that can be determined remotely. A thoughtfully prepared classification – that adheres to Stoddart’s (1978) classification principles, which state that classes should be explicit, unique, comprehensible, and should follow the language of prior schemes - can support production of maps and other science (monitoring, management) that are still relevant to historic work but that can go forward with consistent definitions21.

Step 2. Development. Creator requirements - relating Reef Cover classes to remote sensing data

Development of appropriate mapping classes requires a sensitive trade-off between the needs of users (in terms of the level of detail needed, appropriate for scaling, consistent across regions, simple enough to be manageable but detailed enough to be understandable), and the input data available and quality of the globally repeatable mapping methods of the map producers.

While vast in terms of scalability, data producers are more constrained in terms of sensor capabilities such as spatial resolution (limited to pixels) and depth detection limits (limited by light penetration), and processing power (high numbers of map classes becoming more computationally expensive). Physical conditions and colour derived from remote sensing, along with their textural and spatial relationships, can be linked to reef zonation13, with depth and wave exposure being particularly important information to explaining geomorphology64.

To select a set of Reef Cover classes that could be defined by attributes available from most commonly available public access or commercial satellite data, but that also corresponded to common classes found in the classification literature, and relevant from a user perspective, we looked for intersectionality between physical attribute data that can be derived from satellites but also help shape and define reef morphology.

Physical attributes

The physical environment – light, waves and depth – plays a deterministic role in reef structural development and the ecological patterning across zones39. Underlying geomorphic structural features can almost always be characterised in terms of three core characteristics: i) depth, ii) slope angle and iii) exposure to waves (Fig. 2).

Fig. 2
figure 2

Physical attributes derived from remote sensing data such as depth, slope angle and exposure are sufficient to delineate some of the key geomorphic reef zones in the classic literature. The coral reef classifier for global scale analyses of shallow water tropical coral reefs shows how relative measures can characterise reef zones.

Full size image

Depth

Depth is a useful attribute for bridging human and machine-led classifications. Bathymetry can be derived from spectral information from satellites since the absorption of light at specific wavelengths also has known relationships with water column depth65 but also relates to reef geomorphology (due to role of primary production in powering biogenic calcification)66. Bathymetric data also provides the basis for other critical depth-derived products, slope and aspect, which are used to distinguish geomorphic classes and reef environmental parameters, e.g., exposure to breaking wave energy (Fig. 2).

Reef Crest, for example, is often described as the shallowest part of the reef 62, while Lagoon represents a deep depression in the reef structure57,67. Depth thresholds are sometimes defined: a threshold of 10 m was suggested to differentiate true lagoons from shallow water areas68, and an 18 m threshold has been used to distinguish Reef Front from Reef Slope17. In the Reef Cover classification, depth was particularly important for distinguishing Fore Reef classes (e.g. Reef Slope, Terrace) from Reef Crest and Reef Flat classes (Table 1, Fig. 2). Generally, tides and variability in water clarity and regional eustatic discrepancies in reef top depth (e.g., Reef Flat in Atlantic systems generally lie much lower with respect to tides than in the Indo-Pacific67) mean relative depths are more appropriate, which is why absolute numbers were not used in Reef Cover definitions.

Table 1 Attributes of reef zones that help support classification.
Full size table

Slope

Slope angle, either absolute angle or discontinuities in angle acting as a break between zones, is an important differentiator of reef zones. Reef Flats are defined as being horizontal ‘flattened”69 “flat-topped”70; Fore Reef slope zones often include references to slope angle (e.g., in one classification Fore Reef has been defined as “any area of the reef with an incline of between 0 and 45 degrees”62), and Walls– common on atolls - are “near vertical” features. Variability in slope continuity can also be an important way to demarcate zones71. Montaggioni illustrated a range of representative profiles across atolls and barrier reefs, with convoluted profiles allowing subdivisions of reef slope, particularly across fringing reefs which are less likely to show a uniform reef slope than an atoll53, and Reef Crest is sometimes defined as a demarcation point separating the Fore Reef from the Reef Flat53,62,72. Where water depth can be derived from remotely sensed spectral data, bathymetry can be used to directly calculate slope (i.e., by calculating the slope angle between a pixel and its neighbours) or by considering the local variance in depth (e.g., the standard deviation in depth values within some radius of each pixel).

In the Reef Cover classification, slope angle data were used to distinguishing Fore Reef classes such as Reef Slope and Reef Front, from horizontal classes such as Outer and Inner Reef Flat and Lagoons (Table 1, Fig. 2).

Exposure

Physical exposure of reefs is a key driver of zonation. Reef Crests – linked to wave breaking – are often described as “an area of maximum wave shoaling”, i.e. a zone that absorbs the greatest wave energy62,69. Fore Reefs are frequently sub-divided based on relative exposure (e.g. exposed vs sheltered slope, or windward vs leeward57). Exposure influences profile shape and importantly the communities growing in the zone, so that slopes with identical profiles could have very different communities57,73. Sometimes these zones are related to the communities found there. Meanwhile, exposure across the reef means back-reef zones contain sheltered water bodies. Together with data on water depth and bathymetry, wave energy data was key for distinguishing key Reef Cover classes74,75.

Colour and texture

Sub-surface spectral reflectance data can provide measurements of reef colour and texture over large areas. Concentrations of photosynthetic pigments in coral, algae and seagrass as well as light scattering by inorganic materials means spectral reflectance can also be used to determine biophysical properties of the reef 65. Colour and texture information derived from satellites can be used to manually draw polygons around similar geomorphologic units or habitats but provide the basis to drive image-based thematic mapping (such as digital number, radiance, reflectance) and texture, through spectral processing64. Texture measures are also used to improve classification by allowing spectrally similar substrates like corals and macroalgae to be distinguished. Reef Flats, for example, having a single driver of zonation, in contrast to several drivers on most other zones, makes benthic zonation particularly distinct39, and easily detectable as coloured bands in aerial images of reef flats. This allows colour and texture to be used to distinguish Outer Reef Flats, which have a greater component of photosynthetically active corals and algae, from Inner Reef Flats which appear brighter due to a higher proportion of sand build up in this depositional area (Fig. 3).

Fig. 3
figure 3

Satellite-derived colour and texture can be informative in distinguishing Reef Cover classes of relevance to ecologists and managers, since spectral reflectance mirrors the benthos which in depositional areas may be dominated by reef-derived sediments, or on hard substrate may reflect benthic communities. Not all zones can be distinguished by colour alone (e.g., walls and steep slopes), but examples of zones with clear colour/texture differences are outlined in red.

Full size image

Spatial relationships

Size and shape

The size and shape of reef features can help determine Reef Cover class. Many large-scale reef structural features appear elongate as the shelf constrains shape – and reef morphology can even help predict shape as they constrain accommodation space and influence deposition76. Reef Flats, for example, boast the broadest horizontal extent of any geomorphic zone, typically 500 to 1000 m across, but reaching several kilometres in width across some Pacific atolls71. Lagoons also tend to be broad in width although width and shape can be variable depending on reef type. Understanding some of these characteristics can help determine classes, although these are usually defined relationally rather than by application of size thresholds.

Neighbourhood and enclosure

Natural scientists agree that reefs feature three major geomorphic elements: a Fore Reef, a Reef Crest and a Back Reef (although subdivisions and complexities exist around these). Because of the influence of large-scale processes on reef development, these zones occur in order17,39,53. Reef Crest is arguably the most defining characteristic of any reef – the break point at which a sharply defined edge divides the shallower platform from a more steeply shelving reef front71, around which other geomorphic zones arranged in parallel77. As a result, spatial arrangement of zones can be informative for mapping (Table 2). For example, Back Reef is often defined as being contiguous to the Reef Crest (Back Reef is often defined as any reef feature found landward of the crest).

Table 2 Relational characteristics of Reef Cover classes displaying neighbourhood (including adjacency and enclosure rules) used to distinguish internal coral reef geomorphological zones.
Full size table

Enclosure to semi-enclosure within a bordering reef construction (e.g., in lagoons68) is another feature used classically to define reef zones, but that could also be derived from satellite imagery.

The Reef Cover typology presented is derived from earth observation data, but attempts to link classes to genetic process, social, ecological and geological importance23. By focussing on the attributes of depth, light, exposure, colour and texture and spatial relationships that are common to both domains, our traditional biophysical knowledge of reefs can be integrated with remote-sensing capabilities. Attributes can be combined to make decision trees (Fig. 4) to help use satellite data to map reefs at the global scale. The Reef Cover list of classes can all be distinguished from these physical attributes alone, supporting production of maps that are still relevant to existing work but that can allow computationally inexpensive determination of mapping classes to beyond what was previously possible38.

Fig. 4
figure 4

Example decision tree for classification of intra-reef zonation using Reef Cover. The decision tree for use by mappers is based on information that would typically be available at the global scale, and related to the physical attributes (depth, slope angle and exposure), colour and texture, and spatial relationships. Here a mix of a priori logical or philosophical grounds taken from a review of literature, tailored to fit a methodology limited by the data.

Full size image

Step 3. Dissemination. Providing user friendly Reef Cover class descriptors that facilitate uptake and use

Computers have revolutionised our ability to classify multidimensional data sources, which allows mapping and modelling at far larger scales for the same effort compared to a human taxonomist. However, without proper consideration of the needs of the end user, classified data may not be effectively applied to conservation challenges4. The Reef Cover classification was developed with five user-needs in mind: relevance, simplicity, transparency, accessibility and flexibility.

Relevance

Different habitats within reefs contribute differently to biological and physical processes. For example, Reef Crests play a disproportionate role in coastal protection, dissipating on average 85% of the incoming wave energy and 70% of the swell energy78,79; Reef Slopes supply an order of magnitude more material to maintain island stability61,80; shallow Reef Front areas often host more coral biodiversity81; Reef Flats support herbivorous fish biomass82 and accessibility of Lagoons often affords them cultural importance as places important for artisanal harvesting83. A classification that effectively captures the appropriate diversity of these habitats can therefore better inform social, biological and physical studies36, such as global conservation planning to safeguard reefs, for example, in order to meet the Convention on Biodiversity Aichi targets34. Map classes need to reflect differences of interest to a wide range of reef scientists, from oceanographers to paleoecologists and fisheries scientists – so careful consideration of natural history is important. Global mapping is usually to enable spatial comparisons, so a classification that is globally applicable was also important.

To explore relevancy, a crosswalk was performed between Reef Cover and a selection of major regional to global coral reef classification10,60,84, mapping22,36,85 and monitoring efforts7,8,56, to make sure important classes from established classifications had not been missed23 (Online-Only Table 2).

Simplicity

Simplicity was achieved by (1) choosing an appropriate mapping scale (internal geomorphic classes), (2) limiting the number of geomorphic classes (17 classes), and 3) providing clear (1 line) descriptors with additional information to address issues of semantic interoperability.

  1. 1.

    Reef Cover was developed to provide consistent mapping of reefs across very large areas: classification of geologic and ecological zones is much more amenable to mapping using remote sensing, given greater consistency in geomorphology across large biogeographic regions32. Satellite data has supported the development of several detailed regional “reef type” classifications, such as nine reef classes for the Great Barrier Reef from Landsat imagery73, six reef classes from the Torres Straight74 and 16 classes for the Red Sea from Quickbird6. However, local reef type classifications are not always applicable globally due to large regional discrepancies in Reef Type. As a result, detailed reef type typologies are more suitable for local to regional classifications6,35. For global mapping, an internal geomorphic approach is better. Finer spatial scale classifications from satellite data are also challenging, due to differences in the spatial scale at which spectral data can be generated (metres) and which benthic assemblages display heterogeneity (sub-metres)32. Medium spatial resolution multispectral data (5 to 30 m) is the most commonly used satellite information used for coral reef habitat mapping42, and classification of internal geomorphic structures may be best suited to this kind of data.

  2. 2.

    Reviews of habitat mapping from remote sensing found the number of map classes averages 18 at continental and global scales13. More than this can become overwhelming for users and computationally expensive for developers at this point in time. Many coral reef classifications contain four or five hierarchical levels and high numbers of classes: the Millennium Coral Reef Mapping Project (MCRMP) was ambitious in developing a standardised typology that captured much of the reef type diversity, but despite defining over 800 reef classes defined at the finest (level 5, essential for local reef mapping) scale36, level 3 (68 classes) continue to be more popularly adopted in publications using this dataset. To keep the classification simple, Reef Cover was limited to 17 geomorphic classes, with simple one line definition provided. A limited class was needed 1) to make it manageable for users, 2) to make it computationally manageable for very large (regional and global) data processing and 3) reduction in classes compared to MCRMP allowed for consistent automated mapping at the global scale – so that whole regions could be directly compared for monitoring and management.

  3. 3.

    Short definitions were provided in plain language for simplicity. To address additional uses issues of semantic interoperability each Reef Cover class definition also outlines other commonly used terms for concepts (synonymy) and explains different interpretations of the same meanings and understanding of the relations between concepts.

Transparency

One barrier to the use of analysing and interpreting big data is user-friendliness. Of 79 coral reef mapping attempts reviewed (62 benthic coral reef maps, 6 geomorphic coral reef maps and 11 mixed), only 13% were accompanied by a clear classification that defined the meaning of map classes14. Describing how the classification relates to data (Step 2) and producing a detailed descriptor (Step 3) along with a diagram allows classification to be understood and also adopted for different projects. We also attempted to address transparency by relating Reef Cover classes to other major global mapping and monitoring efforts (Online-Only Table 2) and providing a decision support tree for users (Fig. 4)69.

Accessibility

Another barrier to the use of analysing and interpreting big data is access75. Much information remains locked behind paywalls, and additional barriers exist including discoverability. To promote accessibility and encourage use, all data were made publicly available (see Data Records section for access). Terms were translated into different languages, as science published in just one language has been shown to hinder knowledge transfer and new findings getting through to practitioners in the field86.

Flexibility

One criticism of thematic habitat maps derived from remote sensing is a lack of flexibility: categorical descriptions of habitats are by design a discrete simplification of the ecological continua, thus classifications limit the interpretation and questions that can be asked76. Flexibility issues were addressed by 1) not prescribing absolute thresholds to each class, instead providing information on how classes relate to each other (Tables 1–3) allowing a) map producers to adapt application of Reef Cover to their own needs, and b) users to interpret with flexibility, 2) providing additional information (Standard Descriptors) including main features, exceptions to rules and broadness as to provide users with a broader understanding of hidden complexities when interpreting class meaning, 3) remaining open to feedback, we hope this Reef Cover version 1 can be improved upon with feedback from the community.

Table 3 Table detailing how Reef Cover classes were used in each Case Study, and confidence of producers in determining each class (scored from 1 to 10, with 1 being very low confidence and 10 being very high) from satellite information in Case Study 2.
Full size table

Data Records

Reef Cover classification system (Version 1.0) presented in this paper has been made publicly available as a list of map classes and descriptors “Reef Cover Classification (v1). Internal coral reef class descriptors for global coral reef habitat mapping” (pdf format) through Dryad23.

The classification system includes 17 Reef Classes (Fig. 2) and their descriptors, including Standard Name - short class name, Standard Label - longer class name, Standard Description – detailed class descriptor, including context and main attributes (highlighted), Translations - Standard Name in different languages, Synonyms - list of commonly used synonyms.

Diagrams of how each class relates to major reef types, and a Glossary of terms is also provided.

The Reef Cover Classification document also contains an Attribute Table (Table 1), showing how classes relate to each other based upon on Depth, Slope, Exposure, Substrate, Colour, Rugosity and Benthic Cover data, information that might be available to mappers either from spectral reflectance, bathymetric, oceanographic or ecological datasets, and a Crosswalk Table (Online-Only Table 2) comparing how Reef Cover classes align with other major reef mapping and monitoring efforts.

Additional supporting materials

Two additional resources accompany this data record in order to improve the uptake and use of Reef Cover classification. The first provides additional resources to support producers (remote-sensing data scientists) to create their own coral reef maps from Reef Cover (Methods)87. The second supplies users (coral reef practitioners and scientists) with downloadable regional case study maps developed using the Reef Cover classification (Maps)19,24 and presented as case studies in the Technical Validation section.

Technical Validation

The goal of the Reef Cover classification is to facilitate conversion of large amounts of remote-sensing data into large-scale coral reef mapping products that support the work of coral reef practitioners and scientists. To validate Reef Cover, the classification was applied to two independent large-scale mapping efforts to test whether Reef Cover helped creators and users of the maps. The first, led by researchers in Australia, aimed to map coastal shelf reefs in a section of the Great Barrier Reef from 15 m pansharpened Landsat 8 data using an Object-based approach. Maps were specifically developed to support Great Barrier Reef Marine Park monitoring and management (case study #1). The second was an international collaboration to map two remote oceanic atoll chains in Micronesia as part of a global mapping effort to improve conservation outcomes for reefs, and used 5 m Planet Dove data and an automated cloud-based mapping approach (Allen Coral Atlas case study #2). Each map represents a significant leap forward in scientists’ ability to capture very large areas (thousands of kilometres) of shallow reef habitat in detail in a consistent and repeatable manner (see “Application” section). They also represent improvements in usability of maps: for the two case studies, we detail the challenges for producers in adopting the classification (see “Assessment” section), and successes were assessed on whether products could potentially be translated into real world scientific and conservation outcomes (see “Outcomes” section).

Application: using Reef Cover to produce coral reef maps

Case Study #1. Large scale geomorphic mapping on the Great Barrier Reef for management

In the first case study, Reef Cover was applied by a university-based research group to map 237 reefs in the central Great Barrier Reef Marine Park across a 37,000 km2 area to support local management efforts by government (Fig. 5).

Fig. 5
figure 5

In Case Study 1, the Reef Cover geomorphic classification scheme was applied to an coral reef mapping exercise on the Great Barrier Reef, where 1,900 km2 of reef habitat was mapped from Landsat data from across the Cairns Management Area (37,000 km2) to support national management. Reef Cover classes (15/17 classes used) were foundational in the creation of the largest geomorphic map of the Great Barrier Reef to date, which allowed refined estimates of reef extent (barchart) as well as new estimates of coral habitat to be made (see Roelfsema et al. 2020 for details36).

Full size image

The Cairns Management Region represents 6% of the Great Barrier Reef (GBR) but includes the tourist hubs of Cairns and Port Douglas, making it one of the most highly visited regions of the GBR. The Management Region supports more tourism than any other area as well as cultural activities, shipping, research, commercial and recreational fishing. The platform and ribbon reefs that occur in this region are typical of those on the Queensland Shelf, but very different to the oceanic atolls of case study #2. The high level of use of these reefs makes managing impacts in this area a priority for the Great Barrier Reef Marine Park Authority (GBRMPA), yet only outline extent maps of the large platform and ribbon reefs that make up this section existed previously36,88.

In this case study, the Reef Cover classification was used to guide the production of geomorphic coral reef habitat maps using object-based analysis (via Trimble eCognition 9 software) following a methodology developed by Roelfsema et al.89. Satellite data, including sub-surface and seafloor reflectance as well as tide-corrected water depth to mean surface level were derived from a mosaic of 8 Landsat 8 Operational Land Imager scenes, pan sharpened from 30 m x 30 m to a 15 m by 15 m resolution, and combined with wave models (simulating waves nearshore (SWAN) model74), field data90 and satellite derived bathymetry to generate a geomorphic map layer, following a ruleset based on Reef Cover. A full methodology is available in Roelfsema et al.36.

A restricted geographic range and local knowledge about geomorphology enabled the researchers to apply hard thresholds to each class which allowed data to be assigned to a particular Reef Cover class. For example, a significant wave height of >2 m was set as the threshold for a Reef Slope (“Fore reef exposed”) and <2 m as a Back Reef class, while a 0.75 m depth threshold was used to distinguish Reef Crest, Outer Reef Flat and Inner Reef Flat from other classes30. Slope angle thresholds (e.g. 5–90 degrees for a Reef Slope or Sheltered Reef Slope) and sub-surface reflectance thresholds were also set, and these rules were then used to assign data to geomorphic classes.

Case Study #2. Remote reef mapping in Micronesia for conservation

The second case study is an NGO-led large scale mapping exercise to convert 20TB of daily remote sensing data captured by Planet Dove satellites from across a three million km2 area, into a sharable online habitat map of some of the planets remotest coral reefs19 (Fig. 6).

Fig. 6
figure 6

In Case Study 2, the Reef Cover geomorphic classification scheme was applied to an international coral reef mapping exercise: taking 3,072,192 km2 of spectral reflectance data (top panel) to generate coral reef habitat maps for reefs across Micronesia (e.g., Palau and Chuuk Lagoon, bottom panel). Over 2000 km2 of shallow coral reef of the Caroline Island chain (Republic of Palau, Federated State of Micronesia) and Mariana Island archipelago (Commonwealth of the Northern Marianas and US Territory of Guam) was mapped. Source data limited the number of classes that could be used (12/17 classes used) but in general corresponded well with the 25 classes mapped by Millennium Coral Reef Mapping Project (barchart).

Full size image

Two remote island chains in Micronesia were targeted. The Mariana Islands are a crescent-shaped archipelago of 15 volcanic islands making up the Commonwealth of the Northern Marianas (CNMI) and the Territory of Guam. The Caroline Islands, an archipelago of over 500 small islands, span 3500 km from Palau’s Hatohobei Reef in the westernmost point to Kosrae (Federated States of Micronesia) in the east. Spread across a 3 million km2 area, the wide dispersal of these isolated reef systems makes them challenging to map using traditional in-water surveys, and regional mapping to date has relied on earth observation data. Large parts of Micronesia have been mapped by collation of existing maps (ReefBase’s Pacific Maps) and through detailed bathymetry surveys of US jurisdictions of the Mariana Islands by NOAA’s Pacific Islands Benthic Habitat Mapping Center (PIBHMC). The Millennium Coral Reef Mapping Project (MCRMP) used Landsat data to map 6000 km2 of reef across Palau, Federated States of Micronesia, the Marshall Islands and Gilbert Islands91 and the Japanese Ministry of the Environment mapped the region using AVNIR2 and Landsat data in 201078. Many of these maps were used to produce the United Nations Environment Program (UNEP) World Conservation Monitoring Centre (UNEP-WCMC) Global Distribution of Coral Reefs data product, that is used as a global coral extent layer today86.

The Reef Cover classification was used to generate coral reef habitat maps of the Marianas and Caroline Islands from satellite data, using an automated cloud-based machine learning approach and combined with object-based clean-up developed by Lyons, et al.38. Sentinel-2, Landsat 8 and Planet Dove satellite-derived relative bathymetry and surrogate for slope angle were used to identify major structural classes such as lagoons or reef slopes. In contrast to Case Study 1, hard thresholds were not applied to Reef Cover but training data for the classifier and neighbourhood rules (e.g., reef crest cannot be surrounded by reef flat) were more important in determining class. Expert derived, manually interpreted training data were used to train an algorithm to identify Reef Cover classes from the data. Combined with information on the substrate, calculated from colour, brightness levels and texture produced by spectral reflectance data from the satellites, geomorphic classes were assigned (Fig. 6). All code for developing these maps is publicly available87.

Assessment: challenges and benefits of Reef Cover

In both case studies, Reef Cover was adapted to suit the specifics of the mapping exercise. Not all Reef Cover classes were used23: in Case Study #1, spatial resolution of the satellite data meant Wall and Sheltered Wall classes were not detectable. In Case Study #2, bathymetry was only reliable to a depth of 10 m, so the deeper Reef Slope and Sheltered Reef Slope classes were additionally beyond detection limits, and Reef Island was not included due to the way the land masking was performed (Table 3). Turbid water in inshore areas led to the requirement for a Terrestrial Reef Flat class (like fringing reef flat, but directly attached to land and subject to freshwater runoff, nutrients and sediment).

Case Study #1

A total of 1,984 km2 of shallow water coral reefs were mapped from Innisfail to Lizard Island, with 15 of the 17 Reef Cover classes used (Wall and Sheltered Wall not used). This allowed for a refinement of the total reef area estimate for this region from 3,164 km2 to 1,984 km2 (Fig. 5). Dominating in terms of areal extent was Back Reef Slope (23% of habitat), Outer Reef Flat (15%), Inner Reef Flat (15%) and Reef Crest (12%) which together made up >60% of the shallow mapped reef area36, reflecting the broad flat-topped nature of the platform reefs typical of the Queensland shelf. Following the release of these maps to GBRMPA (the governing body), several applications that could directly support management have been identified, from improved understanding of coral ecological and biophysical processes through much refined extent layers to helping select appropriate areas for reef restoration and adaptation (see Roelfsema et al. 2020 for details)36.

Case Study #2

A total of 2,188 km2 of reef were mapped, with eight classes used (Fig. 6, Table 3). Dominating in terms of areal extent were Reef Front (renamed Reef Slope) comprising 23% of the shallow mapped reef area, the Inner and Outer Reef Flat classes (together 35%) and Shallow Lagoon (18%), reflecting that the region is typified by atolls or high islands with or without expansive lagoons. The spread of classes was largely in agreement with MCRMP outputs, who mapped more than twice as many classes (24 classes at the L4 level which aligns best with Reef Cover), but found five of these (Bay Exposed Fringing, Inner Slope, Fore Reef, Shallow Terrace and Subtidal Reef Flat) made up 85% of the map extent suggesting at very large scales some of the additional detail is redundant. A crosswalk found the distribution of classes was comparable with the Allen Coral Atlas classes, with Reef Front (MCRMP Forereef) accounting for 16%, Inner and Outer Reef Flat (seven classes combined) 43% and Shallow Lagoon (three classes combined) 30%. The total reef area mapped by MCRMP across the same area was 15,808 km2 and 38 classes at the L4 level (see crosswalk Online-Only Table 2), but once the dataset was filtered to remove deep classes (Deep Reef, Deep Non-Reef) and Land, this became 3,809 km2 and 24 classes, the higher extent value reflecting MCRMP’s ability to map deeper (e.g. 37 km2 of Deep Lagoon was mapped, while no Deep Lagoon was detected by the Allen Coral Atlas) and the inclusion of “Variable Depth” classes in this number.

Shallow reef extent estimates for the whole region were closer in value: Allen Coral Atlas estimated 1,569 km2 of Reef Top, MCRMP 1,293 km2 of Shallow Reef and UNEP-WCMC, who provide an outline of shallow reef, estimated an areal coverage of 1,590 km2 of shallow reef area.

A team of eight experts involved in the creation of the maps were asked to evaluate their confidence in assigning Reef Cover classes (Table 3). Scoring confidence in each class (from 1 very low confidence to 10 very confident) allowed assessment of how applicable map producers working with satellite data found the Reef Cover classes. While all classes were scored > 5, there was some variability in confidence between classes, with mappers having the greatest confidence and consistency in their ability to determine Reef Crest (mean score 8.0 ± 1.3 SD) and Lagoon (8.0 ± 0.9 SD) from remotely sensed data, and the least confidence around Back Reef Slope (5.9 ± 1.7 SD).

Application of the Reef Cover classification allowed us to test the usability of the typology to map producers, and it was generally found to be flexible and adaptable, and mappers more confident than not in interpreting and applying classes. It could be aligned with existing schemes, but with just 17 options remained simple enough to allow for automated processing at 1000 km + scales with minimal human supervision. While limitations of the source data meant not all Reef Cover classes could be captured in the exercises, retaining classes like Wall and Slope in the classification is important for producers who may be work with source data with finer spatial resolution or depth. Moreover, the classification proved a good foundation for development of both sets of maps, despite the large differences in reefs being mapped (shallow coastal platform reefs vs remote oceanic atolls), the approaches used (object-based image analysis in mapping software vs automated cloud-based processing in Google Earth Engine) and the rationale (national management vs international conservation), and maps created are pushing the boundaries of in terms of detail, consistency and spatial extent.

Outcomes: use of maps developed using Reef Cover to address real-world challenges

The overarching purpose of developing the Reef Cover classification was to improve the conversion of large amounts of remote sensing data into a mapped format that not only could visually communicate reef information, but would practically support coral reef science and conservation work. The final test of Reef Cover is whether the classification aided translation of remote sensing data into a real-world practical outcome for users, with success measured in scientific and conservation outcomes.

Case Study #1

The Great Barrier Reef (GBR) is of immense biological, cultural and economic importance92, but has also rapidly degraded over the last 30 years, and managers are under pressure to halt the declines that have been attributed to global warming, cyclones, pollution and Crown-of-Thorns Starfish outbreaks93. Improved spatial information on reef geomorphic zonation is critical to support scientific work to understand how the GBR is changing, and to support resource management decisions that enable conservation of the reef and its essential ecosystem services. Reef Cover here supported production of geomorphic maps specifically to support governance for a significant portion of GBR shallow reefs at a level of detail not previously available. Compared to existing maps that only outline each reef, the increase in detail provided by these new habitat maps enabled discrete characterisation of each reef’s geomorphology and benthic composition. With the new habitat maps, areas within each reef can be identified as either coral habitat or not coral habitat.

Creation of these Cairns Management Region maps has led to refinement of coral and Crown-of-Thorns recruitment modelling and water quality modelling exercises, both of which were previously using reef extent maps, many of which included large areas of deep water overestimating reef size and distribution36. Living coral cover remains a key metric for managers assessing reef health, and in this Case Study the Reef Crest, Reef Slope and Reef Front classes were further used as a basis to derive an estimate of habitat available for coral colonisation (‘potential coral habitat’) – a value of 761 km2,36.

Case Study #2

The area mapped in Case Study #2 is home to 353,000 islanders whose culture, and many cases livelihoods, are related to coral reefs though fishing, recreation and tourism. These reefs continue to be impacted by pressures from climate change (warming and high intensity storms) and local pollution (associated with crown-of-thorns sea star outbreaks) and overfishing80. The six nations remain committed to the Micronesia Challenge, an international conservation strategy across the six nations of Micronesia to conserve 30% of marine resources by 2020 in line with UN Sustainable Development goals. Mapping can help support marine spatial planning exercises: habitat maps such as the MCRMP of the area have been previously used to calculate estimates of fish biomass81.

In the production of the Micronesia maps, 125 GB of remote sensing spatial data (extracted from over 20TB of raw Planet Imagery) was converted into eight Reef Cover classes and displayed in an interactive web platform at AllenCoralAtlas.org. These products are now being used to a) communicate coral reef information and b) support conservation planning by coral reef practitioners in the region, from NGOs and research organisations to the communities that live on the islands. For example, maps of reefs in the Republic of Palau have been integrated into a spatial analysis model by The Nature Conservancy, to help the organisation identify where to site aquaculture as part of a national-scale project in partnership with the Palau Environmental Quality Protection Board, Bureau of Marine Resources and Palau Community College. Meanwhile, maps of the reefs across the Federated States of Micronesia are being used by the Waitt Institute to help plan research expeditions to remote submerged reefs, as well as support marine spatial planning exercises in the area. Researchers commented that, “for a place like the FSM that has a pretty crude current estimate for distribution of coral reef structures, the Atlas is a huge value for them and a very necessary tool in the marine spatial planning process” and “These are some of the most critical pieces of information to create policy.” In Micronesia’s Outer Islands, One People One Reef, a collaboration of communities and scientists, believed the open-access and easy to use format of the products could prove useful in communicating ideas and connecting with remote communities involved in traditional management. Finally, researchers leading the Micronesia Challenge at the University of Guam found the maps to be a dynamic and interactive communication tool during stakeholder meetings, allowing meeting participants to design and review current marine protected areas, and negating the need for an on-site GIS expert during meetings.

There is still room to improve both the mapping process and user experience: the number of classes used in the typology was refined due to data limitations. A survey of 26 users found 42% of those frequently worked in places with little or no internet connectivity, and 10% needed to work on a mobile device82. On balance, use of Reef Cover helped creators generate large scale consistent maps from remote sensing data, and map classes proved relevant and useful for researchers and managers looking to solve management and conservation challenges.

Usage Notes

Using Reef Cover to create coral reef maps

Users planning to create their own coral reef geomorphic maps using the Reef Cover classification system (Version 1.0) presented should download and read though the full “Reef Cover Classification (v1). Internal coral reef class descriptors for global coral reef habitat mapping” available as a .pdf through Dryad23.

The document provides detailed information on how to define and interpret each of the 17 suggested Geomorphic Reef Classes (Fig. 7), with additional information on how each of these classes can be related to physical attributes (Table 1), colour and texture (Fig. 3) and relational characteristics (Table 2), while the in-depth descriptors allow flexibility in interpreting classes for different user needs. Depending on the quality and type of your input data, users might want to consider setting and applying thresholds for attributes such as slope angle and depth to facilitate mapping (as in Case Study 1), or excluding non-relevant classes such as those are beyond mapping detection limits (as in Case Study 2). An example decision tree of how users might determine geomorphic map classes is also provided below (Fig. 4).

Fig. 7
figure 7

How to use Reef Cover: the pdf document walks through each of the 17 Reef Cover classes providing information on five variables: Standard Name - short class name, Standard Label - longer class name, Standard Description – detailed class descriptor, including context and main attributes (highlighted), Translations - Standard Name in different languages, Synonyms - list of commonly used synonyms.

Full size image

Diagrams of how each class relates to major reef types (atolls, fringing reefs, platform reefs and barrier reefs e.g. Figure 7), and a Glossary of terms is also provided.

Finally, for additional support in creating maps using Reef Cover, the Google Earth Engine code used to produce the Micronesia maps presented in this Case Study 2 is fully open access (https://github.com/CoralMapping/gee-mapping-source) and in full detail at https://doi.org/10.5281/zenodo.383324687.

Using Reef Cover to interpret coral reef maps

As well as using the Reef Cover classification document as a basis for creation of new maps from remote sensing, the classification is also intended as a guide or key for map users in the conservation space wanting to interpret the Great Barrier Reef24 or Micronesia maps88 or any future mapping products (e.g., Allen Coral Atlas habitat maps17) that are created around the classification.

Users planning to interpret geomorphic mapping products for their own scientific or conservation goals should also download and read though the full “Reef Cover Classification (v1). Internal coral reef class descriptors for global coral reef habitat mapping” available as a .pdf through Dryad69, to get a full understanding of how classes can be interpreted.

To further support users, a free online course, Remote Sensing and Mapping for Coral Reef Conservation Online Course, designed to help marine managers, conservation practitioners, scientists, decision makers, and GIS professionals decide whether these remote sensing products and mapping technologies can help inform their conservation and restoration work. Lesson two is developed around Reef Cover and provides more information in how to interpret the Reef Cover map classes.

Using Case Study 1 (Cairns Management Area) maps

Static geomorphic digital maps of the Cairns to Cooktown management area of the Great Barrier Reef are downloadable as a shapefile from https://doi.org/10.1594/PANGAEA.925657. This dataset consists of shapefiles and auxiliary files for each of the geomorphic zonation and dominant benthic cover types on the shallow offshore reefs of the Cairns to Cooktown Management area of the Great Barrier Reef, Australia. See Table 3 for how Reef Cover class definitions link to Cairns Management Region map class names.

Using Case Study 2 (western Micronesia maps), and other Allen Coral Atlas resources

Static geomorphic digital maps of shallow coral reef habitat across the Caroline and Mariana Islands in western Micronesia (Version 1.0) are downloadable in several formats as a tar file (western-micronesia-aca.tar.gz) from Zenodo19 [https://doi.org/10.5281/zenodo.3953052]. MacOS can open tar and tar.gz files by default with the Archive UtilityUsers, Windows users will need an external program (7-Zip or WinRar) to extract files. The compressed folder Western-Micronesia contains three sub-folders: geomorphic, benthic and boundary. The geomorphic folder contains digital geomorphic coral reef habitat maps described in this study, mapped to 12 Allen Coral Atlas Reef Cover classes (Fig. 5, class descriptor available in Reef Cover document69) and stored in a variety of standard geospatial formats. Shapefiles are available for use with most GIS software (geomorphic.shp, geomorphic.shx, geomorphic.dbf and geomorphic.prj), a KML file for viewing in a browser such as Google Earth (geomorphic.kml), and GeoJSON (geomorphic.geojson). The benthic folder contains the same file formats, but same reefs have been mapped to six benthic classes: Seagrass, Coral Habitat, Rubble, Sand, Microalgal Mats and Rock (see Reef Cover for class descriptors69), and the boundary folder contains the outline of the area mapped, again in the same three formats. Users will be able to access updates and download further regional maps through via this Zenodo link [https://zenodo.org/record/3833246#.Xxo1togzZPY] which links through dynamic maps currently hosted to AllenCoralAtlas.org [http://www.allencoralatlas.org/]18, where up-to-date usage notes are available through the “FAQ” section. Further support is available by emailing support@allencoralatlas.org. The Allen Coral Atlas currently has two mapped themes: one that displays global geomorphic zones (12 classes) and another for global benthic zones (6 classes) commonly associated with shallow water tropical coral reefs. See Table 3 for how Reef Cover class definitions link to Allen Coral Atlas class names.

Full methodology for creating your own maps following the Great Barrier Reef mapping methodology are available here. The Allen Coral Atlas classification process and links to the code used to produce the maps, along with the data themselves can be accessed through Zenodo link [https://doi.org/10.5281/zenodo.3833246]87. This link provides resource and citation for code, standards and publications arising from the Allen Coral Atlas18, including Google Earth Engine source code for mapping algorithms: https://github.com/CoralMapping/gee-mapping-source. This repository contains all the Google Earth Engine source code that generates the mapping outputs on the Allen Coral Atlas, including maps and validation statistics.