Table 2 Overview of the test program. The times in the program when 3D Lidar scans and RFID surveys were completed are marked with an asterisk and dagger (†) respectively in the ‘Run Durations’ column.

From: High-resolution, large-scale laboratory measurements of a sandy beach and dynamic cobble berm revetment

WL increment/Test Duration (hr) Hs (m) Tp (s) Water level zwl (m) Number of Runs Run Durations (minutes)
Phase SB - Morphological response of a sandy beach with a rising water level
SB0 20 0.8 6 4.5 14 *20,20,20,30,30,60,60*,60,120,
120,120,180,180,180       
SB1 7 0.8 6 4.6 9 20,20,20,30,30,60,60,60,60,60
SB2 7 0.8 6 4.7 7 20,40,60,60,60,60,120*
SB3 7 0.8 6 4.8 7 20,40,60,60,60,60,120
SB4 17 0.8 6 4.9 11 20,40,60,60,60,60,120,120,120,180,180
Phase SB – Resilience testing at the maximum water level zwl = 4.9m
SBE1 2 1 7 4.9 3 20,40,60
SBE2 4 1.2 8 4.9 5 20,40,60,60,60,60
SBA1 6 0.6 12 4.9 7 20,40,60,60,60,60,60*
Phase DR – Morphological response of a sandy beach with a dynamic revetment to a rising water level
DR0 20 0.8 6 4.5 14 *20,20,20,30,30,60,60,60,120,120,120,180,180,180*
Dynamic revetment installation
DR1 7 0.8 6 4.6 9 *†20,20,20,30,30,60,60,60,120†
DR2 7 0.8 6 4.7 7 20,40,60,60,60,60,120*†
DR3 7 0.8 6 4.8 7 20,40,60,60,60,60,120*†
DR4 17 0.8 6 4.9 11 20,40,60,60,60,60,120*†,120,
120,180,180*†       
Phase DR – Resilience testing at the maximum water level zwl = 4.9m
DRE1 2 0.9 6 4.9 3 20,40,60†
DRE2 2 1 7 4.9 4 20,20,20,60†
DRE3 1 1 8 4.9 3 20,20,20
DRR1 2 0.8 6 4.9 2 60,60
Phase DR – Resilience testing with recharged revetment at the maximum water level zwl = 4.9m
DRN1 2 0.8 6 4.9 2 60,60
DRN2 0.66 1.0 8 4.9 2 20,20
DRN3 2 0.8 6 4.9 2 60,60
DRN4 0.66 1.0 9 4.9 2 20,20
DRN5 0.33 1.2 8 4.9 1 20
DRN6 1 0.8 6 4.9 1 60
  1. A more detailed breakdown of the test program is given in the ‘DynaRev_TestProgram.xlsx’ file provided in the dataset associated with this experiment.