Supplementary Fig. 5: Front and rear view of base frame and smoke generator assembly. | Nature Protocols

Supplementary Fig. 5: Front and rear view of base frame and smoke generator assembly.

From: Biomimetic smoking robot for in vitro inhalation exposure compatible with microfluidic organ chips

Supplementary Fig. 5

a. The Base Frame is assembled by acrylic solvent bonding the acrylic Base Frame components together and screwing in support feet (4) and brackets (4) into base. b. The entire Smoke Generator is assembled by putting together all components from Figs. 25. The Smoke Containment Module can be locked onto the Base Frame by aligning screws and nuts through holes on the front and back walls of the Smoke Containment Module and brackets on Base Frame Module. The inside of the Smoke Generator can be accessed using the sliding doors from the Smoke Containment Module. Wires for the electronics and fed through an opening in the back wall of the Smoke Containment Module.

Back to article page